All of lore.kernel.org
 help / color / mirror / Atom feed
From: ira.weiny@intel.com
To: linux-ext4@vger.kernel.org,
	Andreas Dilger <adilger.kernel@dilger.ca>,
	"Theodore Y. Ts'o" <tytso@mit.edu>, Jan Kara <jack@suse.cz>,
	Eric Biggers <ebiggers@kernel.org>
Cc: Ira Weiny <ira.weiny@intel.com>,
	Al Viro <viro@zeniv.linux.org.uk>,
	Dan Williams <dan.j.williams@intel.com>,
	Dave Chinner <david@fromorbit.com>,
	Christoph Hellwig <hch@lst.de>, Jeff Moyer <jmoyer@redhat.com>,
	"Darrick J. Wong" <darrick.wong@oracle.com>,
	linux-fsdevel@vger.kernel.org, linux-kernel@vger.kernel.org
Subject: [PATCH V3 5/8] fs/ext4: Only change S_DAX on inode load
Date: Tue, 19 May 2020 22:57:50 -0700	[thread overview]
Message-ID: <20200520055753.3733520-6-ira.weiny@intel.com> (raw)
In-Reply-To: <20200520055753.3733520-1-ira.weiny@intel.com>

From: Ira Weiny <ira.weiny@intel.com>

To prevent complications with in memory inodes we only set S_DAX on
inode load.  FS_XFLAG_DAX can be changed at any time and S_DAX will
change after inode eviction and reload.

Add init bool to ext4_set_inode_flags() to indicate if the inode is
being newly initialized.

Assert that S_DAX is not set on an inode which is just being loaded.

Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Ira Weiny <ira.weiny@intel.com>

---
Changes from V2:
	Rework based on moving the encryption patch to the end.

Changes from RFC:
	Change J_ASSERT() to WARN_ON_ONCE()
	Fix bug which would clear S_DAX incorrectly
---
 fs/ext4/ext4.h   |  2 +-
 fs/ext4/ialloc.c |  2 +-
 fs/ext4/inode.c  | 13 ++++++++++---
 fs/ext4/ioctl.c  |  3 ++-
 fs/ext4/super.c  |  4 ++--
 fs/ext4/verity.c |  2 +-
 6 files changed, 17 insertions(+), 9 deletions(-)

diff --git a/fs/ext4/ext4.h b/fs/ext4/ext4.h
index 1a3daf2d18ef..86a0994332ce 100644
--- a/fs/ext4/ext4.h
+++ b/fs/ext4/ext4.h
@@ -2692,7 +2692,7 @@ extern int ext4_can_truncate(struct inode *inode);
 extern int ext4_truncate(struct inode *);
 extern int ext4_break_layouts(struct inode *);
 extern int ext4_punch_hole(struct inode *inode, loff_t offset, loff_t length);
-extern void ext4_set_inode_flags(struct inode *);
+extern void ext4_set_inode_flags(struct inode *, bool init);
 extern int ext4_alloc_da_blocks(struct inode *inode);
 extern void ext4_set_aops(struct inode *inode);
 extern int ext4_writepage_trans_blocks(struct inode *);
diff --git a/fs/ext4/ialloc.c b/fs/ext4/ialloc.c
index 4b8c9a9bdf0c..7941c140723f 100644
--- a/fs/ext4/ialloc.c
+++ b/fs/ext4/ialloc.c
@@ -1116,7 +1116,7 @@ struct inode *__ext4_new_inode(handle_t *handle, struct inode *dir,
 	ei->i_block_group = group;
 	ei->i_last_alloc_group = ~0;
 
-	ext4_set_inode_flags(inode);
+	ext4_set_inode_flags(inode, true);
 	if (IS_DIRSYNC(inode))
 		ext4_handle_sync(handle);
 	if (insert_inode_locked(inode) < 0) {
diff --git a/fs/ext4/inode.c b/fs/ext4/inode.c
index d3a4c2ed7a1c..23e42a223235 100644
--- a/fs/ext4/inode.c
+++ b/fs/ext4/inode.c
@@ -4419,11 +4419,13 @@ static bool ext4_should_enable_dax(struct inode *inode)
 	return false;
 }
 
-void ext4_set_inode_flags(struct inode *inode)
+void ext4_set_inode_flags(struct inode *inode, bool init)
 {
 	unsigned int flags = EXT4_I(inode)->i_flags;
 	unsigned int new_fl = 0;
 
+	WARN_ON_ONCE(IS_DAX(inode) && init);
+
 	if (flags & EXT4_SYNC_FL)
 		new_fl |= S_SYNC;
 	if (flags & EXT4_APPEND_FL)
@@ -4434,8 +4436,13 @@ void ext4_set_inode_flags(struct inode *inode)
 		new_fl |= S_NOATIME;
 	if (flags & EXT4_DIRSYNC_FL)
 		new_fl |= S_DIRSYNC;
-	if (ext4_should_enable_dax(inode))
+
+	/* Because of the way inode_set_flags() works we must preserve S_DAX
+	 * here if already set. */
+	new_fl |= (inode->i_flags & S_DAX);
+	if (init && ext4_should_enable_dax(inode))
 		new_fl |= S_DAX;
+
 	if (flags & EXT4_ENCRYPT_FL)
 		new_fl |= S_ENCRYPTED;
 	if (flags & EXT4_CASEFOLD_FL)
@@ -4649,7 +4656,7 @@ struct inode *__ext4_iget(struct super_block *sb, unsigned long ino,
 		 * not initialized on a new filesystem. */
 	}
 	ei->i_flags = le32_to_cpu(raw_inode->i_flags);
-	ext4_set_inode_flags(inode);
+	ext4_set_inode_flags(inode, true);
 	inode->i_blocks = ext4_inode_blocks(raw_inode, ei);
 	ei->i_file_acl = le32_to_cpu(raw_inode->i_file_acl_lo);
 	if (ext4_has_feature_64bit(sb))
diff --git a/fs/ext4/ioctl.c b/fs/ext4/ioctl.c
index 5813e5e73eab..145083e8cd1e 100644
--- a/fs/ext4/ioctl.c
+++ b/fs/ext4/ioctl.c
@@ -381,7 +381,8 @@ static int ext4_ioctl_setflags(struct inode *inode,
 			ext4_clear_inode_flag(inode, i);
 	}
 
-	ext4_set_inode_flags(inode);
+	ext4_set_inode_flags(inode, false);
+
 	inode->i_ctime = current_time(inode);
 
 	err = ext4_mark_iloc_dirty(handle, inode, &iloc);
diff --git a/fs/ext4/super.c b/fs/ext4/super.c
index 7b99c44d0a91..3cb9b48d3cc4 100644
--- a/fs/ext4/super.c
+++ b/fs/ext4/super.c
@@ -1348,7 +1348,7 @@ static int ext4_set_context(struct inode *inode, const void *ctx, size_t len,
 			 * Update inode->i_flags - S_ENCRYPTED will be enabled,
 			 * S_DAX may be disabled
 			 */
-			ext4_set_inode_flags(inode);
+			ext4_set_inode_flags(inode, false);
 		}
 		return res;
 	}
@@ -1375,7 +1375,7 @@ static int ext4_set_context(struct inode *inode, const void *ctx, size_t len,
 		 * Update inode->i_flags - S_ENCRYPTED will be enabled,
 		 * S_DAX may be disabled
 		 */
-		ext4_set_inode_flags(inode);
+		ext4_set_inode_flags(inode, false);
 		res = ext4_mark_inode_dirty(handle, inode);
 		if (res)
 			EXT4_ERROR_INODE(inode, "Failed to mark inode dirty");
diff --git a/fs/ext4/verity.c b/fs/ext4/verity.c
index f05a09fb2ae4..89a155ece323 100644
--- a/fs/ext4/verity.c
+++ b/fs/ext4/verity.c
@@ -244,7 +244,7 @@ static int ext4_end_enable_verity(struct file *filp, const void *desc,
 		if (err)
 			goto out_stop;
 		ext4_set_inode_flag(inode, EXT4_INODE_VERITY);
-		ext4_set_inode_flags(inode);
+		ext4_set_inode_flags(inode, false);
 		err = ext4_mark_iloc_dirty(handle, inode, &iloc);
 	}
 out_stop:
-- 
2.25.1


  parent reply	other threads:[~2020-05-20  5:58 UTC|newest]

Thread overview: 18+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-05-20  5:57 [PATCH V3 0/8] Enable ext4 support for per-file/directory DAX operations ira.weiny
2020-05-20  5:57 ` [PATCH V3 1/8] fs/ext4: Narrow scope of DAX check in setflags ira.weiny
2020-05-20  5:57 ` [PATCH V3 2/8] fs/ext4: Disallow verity if inode is DAX ira.weiny
2020-05-20  5:57 ` [PATCH V3 3/8] fs/ext4: Change EXT4_MOUNT_DAX to EXT4_MOUNT_DAX_ALWAYS ira.weiny
2020-05-20  5:57 ` [PATCH V3 4/8] fs/ext4: Update ext4_should_use_dax() ira.weiny
2020-05-20 13:37   ` Jan Kara
2020-05-20 19:40     ` Ira Weiny
2020-05-21 10:24       ` Jan Kara
2020-05-20  5:57 ` ira.weiny [this message]
2020-05-20  5:57 ` [PATCH V3 6/8] fs/ext4: Make DAX mount option a tri-state ira.weiny
2020-05-20  5:57 ` [PATCH V3 7/8] fs/ext4: Introduce DAX inode flag ira.weiny
2020-05-20 14:11   ` Jan Kara
2020-05-20 18:34     ` Ira Weiny
2020-05-20 19:26   ` Andreas Dilger
2020-05-20 20:02     ` Ira Weiny
2020-05-20 20:55       ` Darrick J. Wong
2020-05-21  0:57         ` Andreas Dilger
2020-05-20  5:57 ` [PATCH V3 8/8] Documentation/dax: Update DAX enablement for ext4 ira.weiny

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20200520055753.3733520-6-ira.weiny@intel.com \
    --to=ira.weiny@intel.com \
    --cc=adilger.kernel@dilger.ca \
    --cc=dan.j.williams@intel.com \
    --cc=darrick.wong@oracle.com \
    --cc=david@fromorbit.com \
    --cc=ebiggers@kernel.org \
    --cc=hch@lst.de \
    --cc=jack@suse.cz \
    --cc=jmoyer@redhat.com \
    --cc=linux-ext4@vger.kernel.org \
    --cc=linux-fsdevel@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=tytso@mit.edu \
    --cc=viro@zeniv.linux.org.uk \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.