All of lore.kernel.org
 help / color / mirror / Atom feed
From: Sergiu Cuciurean <sergiu.cuciurean@analog.com>
To: <linux-kernel@vger.kernel.org>, <linux-iio@vger.kernel.org>
Cc: Sergiu Cuciurean <sergiu.cuciurean@analog.com>,
	Lars-Peter Clausen <lars@metafoo.de>,
	Michael Hennerich <Michael.Hennerich@analog.com>,
	Stefan Popa <stefan.popa@analog.com>,
	Jonathan Cameron <jic23@kernel.org>,
	Hartmut Knaack <knaack.h@gmx.de>,
	Peter Meerwald-Stadler <pmeerw@pmeerw.net>
Subject: [PATCH] iio: dac: ad5592r-base: Replace indio_dev->mlock with own device lock
Date: Wed, 20 May 2020 09:18:13 +0300	[thread overview]
Message-ID: <20200520061819.29056-1-sergiu.cuciurean@analog.com> (raw)

As part of the general cleanup of indio_dev->mlock, this change replaces
it with a local lock on the device's state structure.

Signed-off-by: Sergiu Cuciurean <sergiu.cuciurean@analog.com>
---
 drivers/iio/dac/ad5592r-base.c | 28 +++++++++++++++-------------
 drivers/iio/dac/ad5592r-base.h |  1 +
 2 files changed, 16 insertions(+), 13 deletions(-)

diff --git a/drivers/iio/dac/ad5592r-base.c b/drivers/iio/dac/ad5592r-base.c
index e2110113e884..10109eb81db2 100644
--- a/drivers/iio/dac/ad5592r-base.c
+++ b/drivers/iio/dac/ad5592r-base.c
@@ -166,10 +166,10 @@ static int ad5592r_reset(struct ad5592r_state *st)
 		udelay(1);
 		gpiod_set_value(gpio, 1);
 	} else {
-		mutex_lock(&iio_dev->mlock);
+		mutex_lock(&st->lock);
 		/* Writing this magic value resets the device */
 		st->ops->reg_write(st, AD5592R_REG_RESET, 0xdac);
-		mutex_unlock(&iio_dev->mlock);
+		mutex_unlock(&st->lock);
 	}
 
 	udelay(250);
@@ -247,7 +247,7 @@ static int ad5592r_set_channel_modes(struct ad5592r_state *st)
 		}
 	}
 
-	mutex_lock(&iio_dev->mlock);
+	mutex_lock(&st->lock);
 
 	/* Pull down unused pins to GND */
 	ret = ops->reg_write(st, AD5592R_REG_PULLDOWN, pulldown);
@@ -285,7 +285,7 @@ static int ad5592r_set_channel_modes(struct ad5592r_state *st)
 		ret = -EIO;
 
 err_unlock:
-	mutex_unlock(&iio_dev->mlock);
+	mutex_unlock(&st->lock);
 	return ret;
 }
 
@@ -314,11 +314,11 @@ static int ad5592r_write_raw(struct iio_dev *iio_dev,
 		if (!chan->output)
 			return -EINVAL;
 
-		mutex_lock(&iio_dev->mlock);
+		mutex_lock(&st->lock);
 		ret = st->ops->write_dac(st, chan->channel, val);
 		if (!ret)
 			st->cached_dac[chan->channel] = val;
-		mutex_unlock(&iio_dev->mlock);
+		mutex_unlock(&st->lock);
 		return ret;
 	case IIO_CHAN_INFO_SCALE:
 		if (chan->type == IIO_VOLTAGE) {
@@ -333,12 +333,12 @@ static int ad5592r_write_raw(struct iio_dev *iio_dev,
 			else
 				return -EINVAL;
 
-			mutex_lock(&iio_dev->mlock);
+			mutex_lock(&st->lock);
 
 			ret = st->ops->reg_read(st, AD5592R_REG_CTRL,
 						&st->cached_gp_ctrl);
 			if (ret < 0) {
-				mutex_unlock(&iio_dev->mlock);
+				mutex_unlock(&st->lock);
 				return ret;
 			}
 
@@ -360,7 +360,7 @@ static int ad5592r_write_raw(struct iio_dev *iio_dev,
 
 			ret = st->ops->reg_write(st, AD5592R_REG_CTRL,
 						 st->cached_gp_ctrl);
-			mutex_unlock(&iio_dev->mlock);
+			mutex_unlock(&st->lock);
 
 			return ret;
 		}
@@ -382,7 +382,7 @@ static int ad5592r_read_raw(struct iio_dev *iio_dev,
 
 	switch (m) {
 	case IIO_CHAN_INFO_RAW:
-		mutex_lock(&iio_dev->mlock);
+		mutex_lock(&st->lock);
 
 		if (!chan->output) {
 			ret = st->ops->read_adc(st, chan->channel, &read_val);
@@ -419,7 +419,7 @@ static int ad5592r_read_raw(struct iio_dev *iio_dev,
 		} else {
 			int mult;
 
-			mutex_lock(&iio_dev->mlock);
+			mutex_lock(&st->lock);
 
 			if (chan->output)
 				mult = !!(st->cached_gp_ctrl &
@@ -437,7 +437,7 @@ static int ad5592r_read_raw(struct iio_dev *iio_dev,
 	case IIO_CHAN_INFO_OFFSET:
 		ret = ad5592r_get_vref(st);
 
-		mutex_lock(&iio_dev->mlock);
+		mutex_lock(&st->lock);
 
 		if (st->cached_gp_ctrl & AD5592R_REG_CTRL_ADC_RANGE)
 			*val = (-34365 * 25) / ret;
@@ -450,7 +450,7 @@ static int ad5592r_read_raw(struct iio_dev *iio_dev,
 	}
 
 unlock:
-	mutex_unlock(&iio_dev->mlock);
+	mutex_unlock(&st->lock);
 	return ret;
 }
 
@@ -625,6 +625,8 @@ int ad5592r_probe(struct device *dev, const char *name,
 	iio_dev->info = &ad5592r_info;
 	iio_dev->modes = INDIO_DIRECT_MODE;
 
+	mutex_init(&st->lock);
+
 	ad5592r_init_scales(st, ad5592r_get_vref(st));
 
 	ret = ad5592r_reset(st);
diff --git a/drivers/iio/dac/ad5592r-base.h b/drivers/iio/dac/ad5592r-base.h
index 4774e4cd9c11..23dac2f1ff8a 100644
--- a/drivers/iio/dac/ad5592r-base.h
+++ b/drivers/iio/dac/ad5592r-base.h
@@ -52,6 +52,7 @@ struct ad5592r_state {
 	struct regulator *reg;
 	struct gpio_chip gpiochip;
 	struct mutex gpio_lock;	/* Protect cached gpio_out, gpio_val, etc. */
+	struct mutex lock;
 	unsigned int num_channels;
 	const struct ad5592r_rw_ops *ops;
 	int scale_avail[2][2];
-- 
2.17.1


             reply	other threads:[~2020-05-20  6:19 UTC|newest]

Thread overview: 4+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-05-20  6:18 Sergiu Cuciurean [this message]
2020-05-20  8:46 ` [PATCH] iio: dac: ad5592r-base: Replace indio_dev->mlock with own device lock Ardelean, Alexandru
2020-05-20 12:02 ` [PATCH v2] " Sergiu Cuciurean
2020-05-21 18:38   ` Jonathan Cameron

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20200520061819.29056-1-sergiu.cuciurean@analog.com \
    --to=sergiu.cuciurean@analog.com \
    --cc=Michael.Hennerich@analog.com \
    --cc=jic23@kernel.org \
    --cc=knaack.h@gmx.de \
    --cc=lars@metafoo.de \
    --cc=linux-iio@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=pmeerw@pmeerw.net \
    --cc=stefan.popa@analog.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.