All of lore.kernel.org
 help / color / mirror / Atom feed
From: Keyon Jie <yang.jie@linux.intel.com>
To: alsa-devel@alsa-project.org
Cc: cezary.rojewski@intel.com, tiwai@suse.de,
	Keyon Jie <yang.jie@linux.intel.com>,
	pierre-louis.bossart@linux.intel.com,
	ranjani.sridharan@linux.intel.com, broonie@kernel.org
Subject: [PATCH v2 2/2] ASoC: topology: remove the redundant pass checks
Date: Thu, 21 May 2020 15:48:47 +0800	[thread overview]
Message-ID: <20200521074847.71406-3-yang.jie@linux.intel.com> (raw)
In-Reply-To: <20200521074847.71406-1-yang.jie@linux.intel.com>

As we have check the 'pass' in the soc_elem_pass_load(), so no need to
check it again in each specific elem_load function, at the same time,
the tplg->pos will be reset to the next header base when the pass is
mismatched, so the increasing of the tplg->pos in these cases made no
sense. Here remove all of them.

Signed-off-by: Keyon Jie <yang.jie@linux.intel.com>
---
 sound/soc/soc-topology.c | 46 ++--------------------------------------
 1 file changed, 2 insertions(+), 44 deletions(-)

diff --git a/sound/soc/soc-topology.c b/sound/soc/soc-topology.c
index 70c0ff7ce13f..6f4269ffd84f 100644
--- a/sound/soc/soc-topology.c
+++ b/sound/soc/soc-topology.c
@@ -246,8 +246,8 @@ static inline void soc_control_err(struct soc_tplg *tplg,
 }
 
 /* pass vendor data to component driver for processing */
-static int soc_tplg_vendor_load_(struct soc_tplg *tplg,
-	struct snd_soc_tplg_hdr *hdr)
+static int soc_tplg_vendor_load(struct soc_tplg *tplg,
+				struct snd_soc_tplg_hdr *hdr)
 {
 	int ret = 0;
 
@@ -268,16 +268,6 @@ static int soc_tplg_vendor_load_(struct soc_tplg *tplg,
 	return ret;
 }
 
-/* pass vendor data to component driver for processing */
-static int soc_tplg_vendor_load(struct soc_tplg *tplg,
-	struct snd_soc_tplg_hdr *hdr)
-{
-	if (tplg->pass != SOC_TPLG_PASS_VENDOR)
-		return 0;
-
-	return soc_tplg_vendor_load_(tplg, hdr);
-}
-
 /* optionally pass new dynamic widget to component driver. This is mainly for
  * external widgets where we can assign private data/ops */
 static int soc_tplg_widget_load(struct soc_tplg *tplg,
@@ -1127,12 +1117,6 @@ static int soc_tplg_kcontrol_elems_load(struct soc_tplg *tplg,
 	int ret;
 	int i;
 
-	if (tplg->pass != SOC_TPLG_PASS_MIXER) {
-		tplg->pos += le32_to_cpu(hdr->size) +
-			le32_to_cpu(hdr->payload_size);
-		return 0;
-	}
-
 	dev_dbg(tplg->dev, "ASoC: adding %d kcontrols at 0x%lx\n", hdr->count,
 		soc_tplg_get_offset(tplg));
 
@@ -1204,14 +1188,6 @@ static int soc_tplg_dapm_graph_elems_load(struct soc_tplg *tplg,
 
 	count = le32_to_cpu(hdr->count);
 
-	if (tplg->pass != SOC_TPLG_PASS_GRAPH) {
-		tplg->pos +=
-			le32_to_cpu(hdr->size) +
-			le32_to_cpu(hdr->payload_size);
-
-		return 0;
-	}
-
 	if (soc_tplg_check_elem_count(tplg,
 		sizeof(struct snd_soc_tplg_dapm_graph_elem),
 		count, le32_to_cpu(hdr->payload_size), "graph")) {
@@ -1741,9 +1717,6 @@ static int soc_tplg_dapm_widget_elems_load(struct soc_tplg *tplg,
 
 	count = le32_to_cpu(hdr->count);
 
-	if (tplg->pass != SOC_TPLG_PASS_WIDGET)
-		return 0;
-
 	dev_dbg(tplg->dev, "ASoC: adding %d DAPM widgets\n", count);
 
 	for (i = 0; i < count; i++) {
@@ -2101,9 +2074,6 @@ static int soc_tplg_pcm_elems_load(struct soc_tplg *tplg,
 
 	count = le32_to_cpu(hdr->count);
 
-	if (tplg->pass != SOC_TPLG_PASS_PCM_DAI)
-		return 0;
-
 	/* check the element size and count */
 	pcm = (struct snd_soc_tplg_pcm *)tplg->pos;
 	size = le32_to_cpu(pcm->size);
@@ -2386,12 +2356,6 @@ static int soc_tplg_link_elems_load(struct soc_tplg *tplg,
 
 	count = le32_to_cpu(hdr->count);
 
-	if (tplg->pass != SOC_TPLG_PASS_LINK) {
-		tplg->pos += le32_to_cpu(hdr->size) +
-			le32_to_cpu(hdr->payload_size);
-		return 0;
-	}
-
 	/* check the element size and count */
 	link = (struct snd_soc_tplg_link_config *)tplg->pos;
 	size = le32_to_cpu(link->size);
@@ -2528,9 +2492,6 @@ static int soc_tplg_dai_elems_load(struct soc_tplg *tplg,
 
 	count = le32_to_cpu(hdr->count);
 
-	if (tplg->pass != SOC_TPLG_PASS_BE_DAI)
-		return 0;
-
 	/* config the existing BE DAIs */
 	for (i = 0; i < count; i++) {
 		dai = (struct snd_soc_tplg_dai *)tplg->pos;
@@ -2610,9 +2571,6 @@ static int soc_tplg_manifest_load(struct soc_tplg *tplg,
 	bool abi_match;
 	int ret = 0;
 
-	if (tplg->pass != SOC_TPLG_PASS_MANIFEST)
-		return 0;
-
 	manifest = (struct snd_soc_tplg_manifest *)tplg->pos;
 
 	/* check ABI version by size, create a new manifest if abi not match */
-- 
2.25.1


  parent reply	other threads:[~2020-05-21  7:39 UTC|newest]

Thread overview: 11+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-05-21  7:48 [PATCH v2 0/2] ASoC topology header parsing refinement Keyon Jie
2020-05-21  7:48 ` [PATCH v2 1/2] ASoC: topology: refine and log the header in the correct pass Keyon Jie
2020-05-26 12:38   ` Cezary Rojewski
2020-05-26 14:45     ` Keyon Jie
2020-05-26 15:30       ` Cezary Rojewski
2020-05-27  1:17         ` Keyon Jie
2020-05-21  7:48 ` Keyon Jie [this message]
2020-05-26 12:40 ` [PATCH v2 0/2] ASoC topology header parsing refinement Cezary Rojewski
2020-05-26 13:29   ` Pierre-Louis Bossart
2020-05-27  1:05     ` Keyon Jie
2020-05-26 14:34   ` Keyon Jie

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20200521074847.71406-3-yang.jie@linux.intel.com \
    --to=yang.jie@linux.intel.com \
    --cc=alsa-devel@alsa-project.org \
    --cc=broonie@kernel.org \
    --cc=cezary.rojewski@intel.com \
    --cc=pierre-louis.bossart@linux.intel.com \
    --cc=ranjani.sridharan@linux.intel.com \
    --cc=tiwai@suse.de \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.