* [PATCH] apalis_imx6: fix video stdout in default environment
@ 2020-05-26 10:03 Anatolij Gustschin
2020-05-26 10:03 ` [PATCH] cm_fx6: " Anatolij Gustschin
` (4 more replies)
0 siblings, 5 replies; 14+ messages in thread
From: Anatolij Gustschin @ 2020-05-26 10:03 UTC (permalink / raw)
To: u-boot
After migration to DM 'vga' name is not longer supported,
change it to 'vidconsole' in the default environment.
Signed-off-by: Anatolij Gustschin <agust@denx.de>
Cc: Igor Opaniuk <igor.opaniuk@toradex.com>
---
include/configs/apalis_imx6.h | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
diff --git a/include/configs/apalis_imx6.h b/include/configs/apalis_imx6.h
index 6f03058a78..0db8e74e9a 100644
--- a/include/configs/apalis_imx6.h
+++ b/include/configs/apalis_imx6.h
@@ -173,7 +173,8 @@
BOOTENV \
"bootcmd=setenv fdtfile ${fdt_file}; run distro_bootcmd ; " \
"usb start ; " \
- "setenv stdout serial,vga ; setenv stdin serial,usbkbd\0" \
+ "setenv stdout serial,vidconsole; \
+ "setenv stdin serial,usbkbd\0" \
"boot_file=zImage\0" \
"console=ttymxc0\0" \
"defargs=enable_wait_mode=off vmalloc=400M\0" \
--
2.17.1
^ permalink raw reply related [flat|nested] 14+ messages in thread
* [PATCH] cm_fx6: fix video stdout in default environment
2020-05-26 10:03 [PATCH] apalis_imx6: fix video stdout in default environment Anatolij Gustschin
@ 2020-05-26 10:03 ` Anatolij Gustschin
2020-06-19 13:38 ` Anatolij Gustschin
2020-05-26 10:03 ` [PATCH] colibri_imx6: " Anatolij Gustschin
` (3 subsequent siblings)
4 siblings, 1 reply; 14+ messages in thread
From: Anatolij Gustschin @ 2020-05-26 10:03 UTC (permalink / raw)
To: u-boot
After migration to DM 'vga' name is not longer supported,
change it to 'vidconsole' in the default environment.
Signed-off-by: Anatolij Gustschin <agust@denx.de>
Cc: Nikita Kiryanov <nikita@compulab.co.il>
---
include/configs/cm_fx6.h | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/include/configs/cm_fx6.h b/include/configs/cm_fx6.h
index 302907dcfb..35f251c15e 100644
--- a/include/configs/cm_fx6.h
+++ b/include/configs/cm_fx6.h
@@ -49,8 +49,8 @@
"scriptaddr=" __stringify(CONFIG_LOADADDR) "\0" \
"fdtfile=undefined\0" \
"stdin=serial,usbkbd\0" \
- "stdout=serial,vga\0" \
- "stderr=serial,vga\0" \
+ "stdout=serial,vidconsole\0" \
+ "stderr=serial,vidconsole\0" \
"panel=HDMI\0" \
"autoload=no\0" \
"uImage=uImage-cm-fx6\0" \
--
2.17.1
^ permalink raw reply related [flat|nested] 14+ messages in thread
* [PATCH] colibri_imx6: fix video stdout in default environment
2020-05-26 10:03 [PATCH] apalis_imx6: fix video stdout in default environment Anatolij Gustschin
2020-05-26 10:03 ` [PATCH] cm_fx6: " Anatolij Gustschin
@ 2020-05-26 10:03 ` Anatolij Gustschin
2020-05-26 20:54 ` [PATCH v2] " Anatolij Gustschin
2020-05-26 10:03 ` [PATCH] nitrogen6x: update video console name Anatolij Gustschin
` (2 subsequent siblings)
4 siblings, 1 reply; 14+ messages in thread
From: Anatolij Gustschin @ 2020-05-26 10:03 UTC (permalink / raw)
To: u-boot
After migration to DM 'vga' name is not longer supported,
change it to 'vidconsole' in the default environment.
Signed-off-by: Anatolij Gustschin <agust@denx.de>
Cc: Igor Opaniuk <igor.opaniuk@toradex.com>
---
include/configs/colibri_imx6.h | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
diff --git a/include/configs/colibri_imx6.h b/include/configs/colibri_imx6.h
index 3d248ef4ef..99a601386c 100644
--- a/include/configs/colibri_imx6.h
+++ b/include/configs/colibri_imx6.h
@@ -156,7 +156,8 @@
BOOTENV \
"bootcmd=setenv fdtfile ${fdt_file}; run distro_bootcmd; " \
"usb start ; " \
- "setenv stdout serial,vga ; setenv stdin serial,usbkbd\0" \
+ "setenv stdout serial,vidconsole; \
+ "setenv stdin serial,usbkbd\0" \
"boot_file=zImage\0" \
"console=ttymxc0\0" \
"defargs=enable_wait_mode=off galcore.contiguousSize=50331648\0" \
--
2.17.1
^ permalink raw reply related [flat|nested] 14+ messages in thread
* [PATCH] nitrogen6x: update video console name
2020-05-26 10:03 [PATCH] apalis_imx6: fix video stdout in default environment Anatolij Gustschin
2020-05-26 10:03 ` [PATCH] cm_fx6: " Anatolij Gustschin
2020-05-26 10:03 ` [PATCH] colibri_imx6: " Anatolij Gustschin
@ 2020-05-26 10:03 ` Anatolij Gustschin
2020-05-26 15:22 ` Troy Kisky
2020-06-19 13:39 ` Anatolij Gustschin
2020-05-26 10:03 ` [PATCH] video: ipuv3: remove non-DM code Anatolij Gustschin
2020-05-26 20:52 ` [PATCH v2] apalis_imx6: fix video stdout in default environment Anatolij Gustschin
4 siblings, 2 replies; 14+ messages in thread
From: Anatolij Gustschin @ 2020-05-26 10:03 UTC (permalink / raw)
To: u-boot
After migration to DM 'vga' name is not longer supported,
Update the upgrade script to use 'vidconsole' instead.
Signed-off-by: Anatolij Gustschin <agust@denx.de>
Cc: Troy Kisky <troy.kisky@boundarydevices.com>
---
board/boundary/nitrogen6x/6x_upgrade.txt | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/board/boundary/nitrogen6x/6x_upgrade.txt b/board/boundary/nitrogen6x/6x_upgrade.txt
index 1a62bbf12e..cd3c33e407 100644
--- a/board/boundary/nitrogen6x/6x_upgrade.txt
+++ b/board/boundary/nitrogen6x/6x_upgrade.txt
@@ -1,4 +1,4 @@
-setenv stdout serial,vga
+setenv stdout serial,vidconsole
echo "check U-Boot" ;
setenv offset 0x400
if ${fs}load ${dtype} ${disk}:1 12000000 u-boot.imx || ${fs}load ${dtype} ${disk}:1 12000000 u-boot.nopadding ; then
--
2.17.1
^ permalink raw reply related [flat|nested] 14+ messages in thread
* [PATCH] video: ipuv3: remove non-DM code
2020-05-26 10:03 [PATCH] apalis_imx6: fix video stdout in default environment Anatolij Gustschin
` (2 preceding siblings ...)
2020-05-26 10:03 ` [PATCH] nitrogen6x: update video console name Anatolij Gustschin
@ 2020-05-26 10:03 ` Anatolij Gustschin
2020-05-26 20:52 ` [PATCH v2] apalis_imx6: fix video stdout in default environment Anatolij Gustschin
4 siblings, 0 replies; 14+ messages in thread
From: Anatolij Gustschin @ 2020-05-26 10:03 UTC (permalink / raw)
To: u-boot
All ipuv3 users have been converted, drop obsolete code.
Signed-off-by: Anatolij Gustschin <agust@denx.de>
---
drivers/video/imx/Kconfig | 2 +-
drivers/video/imx/mxc_ipuv3_fb.c | 43 --------------------------------
2 files changed, 1 insertion(+), 44 deletions(-)
diff --git a/drivers/video/imx/Kconfig b/drivers/video/imx/Kconfig
index c33620e075..78eb0f29fb 100644
--- a/drivers/video/imx/Kconfig
+++ b/drivers/video/imx/Kconfig
@@ -1,7 +1,7 @@
config VIDEO_IPUV3
bool "i.MX IPUv3 Core video support"
- depends on (VIDEO || DM_VIDEO) && (MX5 || MX6)
+ depends on DM_VIDEO && (MX5 || MX6)
help
This enables framebuffer driver for i.MX processors working
on the IPUv3(Image Processing Unit) internal graphic processor.
diff --git a/drivers/video/imx/mxc_ipuv3_fb.c b/drivers/video/imx/mxc_ipuv3_fb.c
index 017a8fb22a..f1ab7a8375 100644
--- a/drivers/video/imx/mxc_ipuv3_fb.c
+++ b/drivers/video/imx/mxc_ipuv3_fb.c
@@ -38,10 +38,6 @@ DECLARE_GLOBAL_DATA_PTR;
static int mxcfb_map_video_memory(struct fb_info *fbi);
static int mxcfb_unmap_video_memory(struct fb_info *fbi);
-#if !CONFIG_IS_ENABLED(DM_VIDEO)
-/* graphics setup */
-static GraphicDevice panel;
-#endif
static struct fb_videomode const *gmode;
static uint8_t gdisp;
static uint32_t gpixfmt;
@@ -391,12 +387,7 @@ static int mxcfb_map_video_memory(struct fb_info *fbi)
}
fbi->fix.smem_len = roundup(fbi->fix.smem_len, ARCH_DMA_MINALIGN);
-#if CONFIG_IS_ENABLED(DM_VIDEO)
fbi->screen_base = (char *)gd->video_bottom;
-#else
- fbi->screen_base = (char *)memalign(ARCH_DMA_MINALIGN,
- fbi->fix.smem_len);
-#endif
fbi->fix.smem_start = (unsigned long)fbi->screen_base;
if (fbi->screen_base == 0) {
@@ -410,10 +401,7 @@ static int mxcfb_map_video_memory(struct fb_info *fbi)
(uint32_t) fbi->fix.smem_start, fbi->fix.smem_len);
fbi->screen_size = fbi->fix.smem_len;
-
-#if CONFIG_IS_ENABLED(VIDEO)
gd->fb_base = fbi->fix.smem_start;
-#endif
/* Clear the screen */
memset((char *)fbi->screen_base, 0, fbi->fix.smem_len);
@@ -543,18 +531,6 @@ static int mxcfb_probe(u32 interface_pix_fmt, uint8_t disp,
mxcfb_set_par(fbi);
-#if !CONFIG_IS_ENABLED(DM_VIDEO)
- panel.winSizeX = mode->xres;
- panel.winSizeY = mode->yres;
- panel.plnSizeX = mode->xres;
- panel.plnSizeY = mode->yres;
-
- panel.frameAdrs = (u32)fbi->screen_base;
- panel.memSize = fbi->screen_size;
-
- panel.gdfBytesPP = 2;
- panel.gdfIndex = GDF_16BIT_565RGB;
-#endif
#ifdef DEBUG
ipu_dump_registers();
#endif
@@ -584,23 +560,6 @@ void ipuv3_fb_shutdown(void)
}
}
-#if !CONFIG_IS_ENABLED(DM_VIDEO)
-void *video_hw_init(void)
-{
- int ret;
-
- ret = ipu_probe();
- if (ret)
- puts("Error initializing IPU\n");
-
- ret = mxcfb_probe(gpixfmt, gdisp, gmode);
- debug("Framebuffer at 0x%x\n", (unsigned int)panel.frameAdrs);
- gd->fb_base = panel.frameAdrs;
-
- return (void *)&panel;
-}
-#endif
-
int ipuv3_fb_init(struct fb_videomode const *mode,
uint8_t disp,
uint32_t pixfmt)
@@ -612,7 +571,6 @@ int ipuv3_fb_init(struct fb_videomode const *mode,
return 0;
}
-#if CONFIG_IS_ENABLED(DM_VIDEO)
enum {
/* Maximum display size we support */
LCD_MAX_WIDTH = 1920,
@@ -710,4 +668,3 @@ U_BOOT_DRIVER(ipuv3_video) = {
.priv_auto_alloc_size = sizeof(struct ipuv3_video_priv),
.flags = DM_FLAG_PRE_RELOC,
};
-#endif /* CONFIG_DM_VIDEO */
--
2.17.1
^ permalink raw reply related [flat|nested] 14+ messages in thread
* [PATCH] nitrogen6x: update video console name
2020-05-26 10:03 ` [PATCH] nitrogen6x: update video console name Anatolij Gustschin
@ 2020-05-26 15:22 ` Troy Kisky
2020-06-19 13:39 ` Anatolij Gustschin
1 sibling, 0 replies; 14+ messages in thread
From: Troy Kisky @ 2020-05-26 15:22 UTC (permalink / raw)
To: u-boot
On 5/26/2020 3:03 AM, Anatolij Gustschin wrote:
> After migration to DM 'vga' name is not longer supported,
> Update the upgrade script to use 'vidconsole' instead.
>
> Signed-off-by: Anatolij Gustschin <agust@denx.de>
> Cc: Troy Kisky <troy.kisky@boundarydevices.com>
> ---
> board/boundary/nitrogen6x/6x_upgrade.txt | 2 +-
> 1 file changed, 1 insertion(+), 1 deletion(-)
>
> diff --git a/board/boundary/nitrogen6x/6x_upgrade.txt b/board/boundary/nitrogen6x/6x_upgrade.txt
> index 1a62bbf12e..cd3c33e407 100644
> --- a/board/boundary/nitrogen6x/6x_upgrade.txt
> +++ b/board/boundary/nitrogen6x/6x_upgrade.txt
> @@ -1,4 +1,4 @@
> -setenv stdout serial,vga
> +setenv stdout serial,vidconsole
> echo "check U-Boot" ;
> setenv offset 0x400
> if ${fs}load ${dtype} ${disk}:1 12000000 u-boot.imx || ${fs}load ${dtype} ${disk}:1 12000000 u-boot.nopadding ; then
>
Thanks!
Acked-by: Troy Kisky <troy.kisky@boundarydevices.com>
^ permalink raw reply [flat|nested] 14+ messages in thread
* [PATCH v2] apalis_imx6: fix video stdout in default environment
2020-05-26 10:03 [PATCH] apalis_imx6: fix video stdout in default environment Anatolij Gustschin
` (3 preceding siblings ...)
2020-05-26 10:03 ` [PATCH] video: ipuv3: remove non-DM code Anatolij Gustschin
@ 2020-05-26 20:52 ` Anatolij Gustschin
2020-05-28 16:07 ` Igor Opaniuk
2020-06-19 13:36 ` Anatolij Gustschin
4 siblings, 2 replies; 14+ messages in thread
From: Anatolij Gustschin @ 2020-05-26 20:52 UTC (permalink / raw)
To: u-boot
After migration to DM 'vga' name is not longer supported,
change it to 'vidconsole' in the default environment.
Signed-off-by: Anatolij Gustschin <agust@denx.de>
Cc: Igor Opaniuk <igor.opaniuk@toradex.com>
---
Changes in v2:
- fix build error
include/configs/apalis_imx6.h | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
diff --git a/include/configs/apalis_imx6.h b/include/configs/apalis_imx6.h
index 6f03058a78..c6c2f46a17 100644
--- a/include/configs/apalis_imx6.h
+++ b/include/configs/apalis_imx6.h
@@ -173,7 +173,8 @@
BOOTENV \
"bootcmd=setenv fdtfile ${fdt_file}; run distro_bootcmd ; " \
"usb start ; " \
- "setenv stdout serial,vga ; setenv stdin serial,usbkbd\0" \
+ "setenv stdout serial,vidconsole; " \
+ "setenv stdin serial,usbkbd\0" \
"boot_file=zImage\0" \
"console=ttymxc0\0" \
"defargs=enable_wait_mode=off vmalloc=400M\0" \
--
2.17.1
^ permalink raw reply related [flat|nested] 14+ messages in thread
* [PATCH v2] colibri_imx6: fix video stdout in default environment
2020-05-26 10:03 ` [PATCH] colibri_imx6: " Anatolij Gustschin
@ 2020-05-26 20:54 ` Anatolij Gustschin
2020-05-28 16:06 ` Igor Opaniuk
2020-06-19 13:37 ` Anatolij Gustschin
0 siblings, 2 replies; 14+ messages in thread
From: Anatolij Gustschin @ 2020-05-26 20:54 UTC (permalink / raw)
To: u-boot
After migration to DM 'vga' name is not longer supported,
change it to 'vidconsole' in the default environment.
Signed-off-by: Anatolij Gustschin <agust@denx.de>
Cc: Igor Opaniuk <igor.opaniuk@toradex.com>
---
Changes in v2:
- fix build error
include/configs/colibri_imx6.h | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
diff --git a/include/configs/colibri_imx6.h b/include/configs/colibri_imx6.h
index 3d248ef4ef..af17a0a137 100644
--- a/include/configs/colibri_imx6.h
+++ b/include/configs/colibri_imx6.h
@@ -156,7 +156,8 @@
BOOTENV \
"bootcmd=setenv fdtfile ${fdt_file}; run distro_bootcmd; " \
"usb start ; " \
- "setenv stdout serial,vga ; setenv stdin serial,usbkbd\0" \
+ "setenv stdout serial,vidconsole; " \
+ "setenv stdin serial,usbkbd\0" \
"boot_file=zImage\0" \
"console=ttymxc0\0" \
"defargs=enable_wait_mode=off galcore.contiguousSize=50331648\0" \
--
2.17.1
^ permalink raw reply related [flat|nested] 14+ messages in thread
* [PATCH v2] colibri_imx6: fix video stdout in default environment
2020-05-26 20:54 ` [PATCH v2] " Anatolij Gustschin
@ 2020-05-28 16:06 ` Igor Opaniuk
2020-06-19 13:37 ` Anatolij Gustschin
1 sibling, 0 replies; 14+ messages in thread
From: Igor Opaniuk @ 2020-05-28 16:06 UTC (permalink / raw)
To: u-boot
Hi Anatolij,
On Tue, May 26, 2020 at 11:54 PM Anatolij Gustschin <agust@denx.de> wrote:
>
> After migration to DM 'vga' name is not longer supported,
> change it to 'vidconsole' in the default environment.
>
> Signed-off-by: Anatolij Gustschin <agust@denx.de>
> Cc: Igor Opaniuk <igor.opaniuk@toradex.com>
> ---
> Changes in v2:
> - fix build error
>
> include/configs/colibri_imx6.h | 3 ++-
> 1 file changed, 2 insertions(+), 1 deletion(-)
>
> diff --git a/include/configs/colibri_imx6.h b/include/configs/colibri_imx6.h
> index 3d248ef4ef..af17a0a137 100644
> --- a/include/configs/colibri_imx6.h
> +++ b/include/configs/colibri_imx6.h
> @@ -156,7 +156,8 @@
> BOOTENV \
> "bootcmd=setenv fdtfile ${fdt_file}; run distro_bootcmd; " \
> "usb start ; " \
> - "setenv stdout serial,vga ; setenv stdin serial,usbkbd\0" \
> + "setenv stdout serial,vidconsole; " \
> + "setenv stdin serial,usbkbd\0" \
> "boot_file=zImage\0" \
> "console=ttymxc0\0" \
> "defargs=enable_wait_mode=off galcore.contiguousSize=50331648\0" \
> --
> 2.17.1
>
Thanks for the patch.
Acked-by: Igor Opaniuk <igor.opaniuk@toradex.com>
--
Best regards - Freundliche Gr?sse - Meilleures salutations
Igor Opaniuk
mailto: igor.opaniuk at gmail.com
skype: igor.opanyuk
+380 (93) 836 40 67
http://ua.linkedin.com/in/iopaniuk
^ permalink raw reply [flat|nested] 14+ messages in thread
* [PATCH v2] apalis_imx6: fix video stdout in default environment
2020-05-26 20:52 ` [PATCH v2] apalis_imx6: fix video stdout in default environment Anatolij Gustschin
@ 2020-05-28 16:07 ` Igor Opaniuk
2020-06-19 13:36 ` Anatolij Gustschin
1 sibling, 0 replies; 14+ messages in thread
From: Igor Opaniuk @ 2020-05-28 16:07 UTC (permalink / raw)
To: u-boot
Hi Anatolij,
On Tue, May 26, 2020 at 11:52 PM Anatolij Gustschin <agust@denx.de> wrote:
>
> After migration to DM 'vga' name is not longer supported,
> change it to 'vidconsole' in the default environment.
>
> Signed-off-by: Anatolij Gustschin <agust@denx.de>
> Cc: Igor Opaniuk <igor.opaniuk@toradex.com>
> ---
> Changes in v2:
> - fix build error
>
> include/configs/apalis_imx6.h | 3 ++-
> 1 file changed, 2 insertions(+), 1 deletion(-)
>
> diff --git a/include/configs/apalis_imx6.h b/include/configs/apalis_imx6.h
> index 6f03058a78..c6c2f46a17 100644
> --- a/include/configs/apalis_imx6.h
> +++ b/include/configs/apalis_imx6.h
> @@ -173,7 +173,8 @@
> BOOTENV \
> "bootcmd=setenv fdtfile ${fdt_file}; run distro_bootcmd ; " \
> "usb start ; " \
> - "setenv stdout serial,vga ; setenv stdin serial,usbkbd\0" \
> + "setenv stdout serial,vidconsole; " \
> + "setenv stdin serial,usbkbd\0" \
> "boot_file=zImage\0" \
> "console=ttymxc0\0" \
> "defargs=enable_wait_mode=off vmalloc=400M\0" \
> --
> 2.17.1
>
Thanks for the patch.
Acked-by: Igor Opaniuk <igor.opaniuk@toradex.com>
--
Best regards - Freundliche Gr?sse - Meilleures salutations
Igor Opaniuk
mailto: igor.opaniuk at gmail.com
skype: igor.opanyuk
+380 (93) 836 40 67
http://ua.linkedin.com/in/iopaniuk
^ permalink raw reply [flat|nested] 14+ messages in thread
* [PATCH v2] apalis_imx6: fix video stdout in default environment
2020-05-26 20:52 ` [PATCH v2] apalis_imx6: fix video stdout in default environment Anatolij Gustschin
2020-05-28 16:07 ` Igor Opaniuk
@ 2020-06-19 13:36 ` Anatolij Gustschin
1 sibling, 0 replies; 14+ messages in thread
From: Anatolij Gustschin @ 2020-06-19 13:36 UTC (permalink / raw)
To: u-boot
On Tue, 26 May 2020 22:52:14 +0200
Anatolij Gustschin agust at denx.de wrote:
> After migration to DM 'vga' name is not longer supported,
> change it to 'vidconsole' in the default environment.
>
> Signed-off-by: Anatolij Gustschin <agust@denx.de>
> Cc: Igor Opaniuk <igor.opaniuk@toradex.com>
Applied to u-boot-video/master, thanks!
--
Anatolij
^ permalink raw reply [flat|nested] 14+ messages in thread
* [PATCH v2] colibri_imx6: fix video stdout in default environment
2020-05-26 20:54 ` [PATCH v2] " Anatolij Gustschin
2020-05-28 16:06 ` Igor Opaniuk
@ 2020-06-19 13:37 ` Anatolij Gustschin
1 sibling, 0 replies; 14+ messages in thread
From: Anatolij Gustschin @ 2020-06-19 13:37 UTC (permalink / raw)
To: u-boot
On Tue, 26 May 2020 22:54:29 +0200
Anatolij Gustschin agust at denx.de wrote:
> After migration to DM 'vga' name is not longer supported,
> change it to 'vidconsole' in the default environment.
>
> Signed-off-by: Anatolij Gustschin <agust@denx.de>
> Cc: Igor Opaniuk <igor.opaniuk@toradex.com>
Applied to u-boot-video/master, thanks!
--
Anatolij
^ permalink raw reply [flat|nested] 14+ messages in thread
* [PATCH] cm_fx6: fix video stdout in default environment
2020-05-26 10:03 ` [PATCH] cm_fx6: " Anatolij Gustschin
@ 2020-06-19 13:38 ` Anatolij Gustschin
0 siblings, 0 replies; 14+ messages in thread
From: Anatolij Gustschin @ 2020-06-19 13:38 UTC (permalink / raw)
To: u-boot
On Tue, 26 May 2020 12:03:19 +0200
Anatolij Gustschin agust at denx.de wrote:
> After migration to DM 'vga' name is not longer supported,
> change it to 'vidconsole' in the default environment.
>
> Signed-off-by: Anatolij Gustschin <agust@denx.de>
> Cc: Nikita Kiryanov <nikita@compulab.co.il>
Applied to u-boot-video/master, thanks!
--
Anatolij
^ permalink raw reply [flat|nested] 14+ messages in thread
* [PATCH] nitrogen6x: update video console name
2020-05-26 10:03 ` [PATCH] nitrogen6x: update video console name Anatolij Gustschin
2020-05-26 15:22 ` Troy Kisky
@ 2020-06-19 13:39 ` Anatolij Gustschin
1 sibling, 0 replies; 14+ messages in thread
From: Anatolij Gustschin @ 2020-06-19 13:39 UTC (permalink / raw)
To: u-boot
On Tue, 26 May 2020 12:03:21 +0200
Anatolij Gustschin agust at denx.de wrote:
> After migration to DM 'vga' name is not longer supported,
> Update the upgrade script to use 'vidconsole' instead.
>
> Signed-off-by: Anatolij Gustschin <agust@denx.de>
> Cc: Troy Kisky <troy.kisky@boundarydevices.com>
> ---
> board/boundary/nitrogen6x/6x_upgrade.txt | 2 +-
> 1 file changed, 1 insertion(+), 1 deletion(-)
Applied to u-boot-video/next, thanks!
--
Anatolij
^ permalink raw reply [flat|nested] 14+ messages in thread
end of thread, other threads:[~2020-06-19 13:39 UTC | newest]
Thread overview: 14+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2020-05-26 10:03 [PATCH] apalis_imx6: fix video stdout in default environment Anatolij Gustschin
2020-05-26 10:03 ` [PATCH] cm_fx6: " Anatolij Gustschin
2020-06-19 13:38 ` Anatolij Gustschin
2020-05-26 10:03 ` [PATCH] colibri_imx6: " Anatolij Gustschin
2020-05-26 20:54 ` [PATCH v2] " Anatolij Gustschin
2020-05-28 16:06 ` Igor Opaniuk
2020-06-19 13:37 ` Anatolij Gustschin
2020-05-26 10:03 ` [PATCH] nitrogen6x: update video console name Anatolij Gustschin
2020-05-26 15:22 ` Troy Kisky
2020-06-19 13:39 ` Anatolij Gustschin
2020-05-26 10:03 ` [PATCH] video: ipuv3: remove non-DM code Anatolij Gustschin
2020-05-26 20:52 ` [PATCH v2] apalis_imx6: fix video stdout in default environment Anatolij Gustschin
2020-05-28 16:07 ` Igor Opaniuk
2020-06-19 13:36 ` Anatolij Gustschin
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.