[PATCH v2 21/23] silica: Drop pengwyn

[Jagan Teki <jagan@amarulasolutions.com>]

OF_CONTROL, DM_SPI and other driver model migration deadlines
are expired for this board.

Drop it.

Cc: Lothar Felten <lothar.felten@gmail.com>
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
---
Changes for v2:
- new patch

 arch/arm/Kconfig                   |   1 -
 arch/arm/mach-omap2/am33xx/Kconfig |   7 -
 board/silica/pengwyn/Kconfig       |  15 ---
 board/silica/pengwyn/MAINTAINERS   |   6 -
 board/silica/pengwyn/Makefile      |  11 --
 board/silica/pengwyn/board.c       | 204 -----------------------------
 board/silica/pengwyn/board.h       |  14 --
 board/silica/pengwyn/mux.c         |  97 --------------
 configs/pengwyn_defconfig          |  67 ----------
 include/configs/pengwyn.h          | 166 -----------------------
 10 files changed, 588 deletions(-)
 delete mode 100644 board/silica/pengwyn/Kconfig
 delete mode 100644 board/silica/pengwyn/MAINTAINERS
 delete mode 100644 board/silica/pengwyn/Makefile
 delete mode 100644 board/silica/pengwyn/board.c
 delete mode 100644 board/silica/pengwyn/board.h
 delete mode 100644 board/silica/pengwyn/mux.c
 delete mode 100644 configs/pengwyn_defconfig
 delete mode 100644 include/configs/pengwyn.h

diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index 7f328e6afe..2f431b60af 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -1904,7 +1904,6 @@ source "board/hisilicon/hikey/Kconfig"
 source "board/hisilicon/hikey960/Kconfig"
 source "board/hisilicon/poplar/Kconfig"
 source "board/isee/igep003x/Kconfig"
-source "board/silica/pengwyn/Kconfig"
 source "board/spear/spear300/Kconfig"
 source "board/spear/spear310/Kconfig"
 source "board/spear/spear320/Kconfig"
diff --git a/arch/arm/mach-omap2/am33xx/Kconfig b/arch/arm/mach-omap2/am33xx/Kconfig
index 60e5ec5684..9e0d700280 100644
--- a/arch/arm/mach-omap2/am33xx/Kconfig
+++ b/arch/arm/mach-omap2/am33xx/Kconfig
@@ -146,13 +146,6 @@ config TARGET_ETAMIN
 	select DM_SERIAL
 	imply CMD_DM
 
-config TARGET_PENGWYN
-	bool "Support pengwyn"
-	select DM
-	select DM_GPIO
-	select DM_SERIAL
-	imply CMD_DM
-
 config TARGET_PHYCORE_AM335X_R2
 	bool "Support phyCORE AM335X R2"
 	select DM
diff --git a/board/silica/pengwyn/Kconfig b/board/silica/pengwyn/Kconfig
deleted file mode 100644
index f2e1098f62..0000000000
--- a/board/silica/pengwyn/Kconfig
+++ /dev/null
@@ -1,15 +0,0 @@
-if TARGET_PENGWYN
-
-config SYS_BOARD
-	default "pengwyn"
-
-config SYS_VENDOR
-	default "silica"
-
-config SYS_SOC
-	default "am33xx"
-
-config SYS_CONFIG_NAME
-	default "pengwyn"
-
-endif
diff --git a/board/silica/pengwyn/MAINTAINERS b/board/silica/pengwyn/MAINTAINERS
deleted file mode 100644
index 14ef7750c5..0000000000
--- a/board/silica/pengwyn/MAINTAINERS
+++ /dev/null
@@ -1,6 +0,0 @@
-PENGWYN BOARD
-M:	Lothar Felten <lothar.felten@gmail.com>
-S:	Maintained
-F:	board/silica/pengwyn/
-F:	include/configs/pengwyn.h
-F:	configs/pengwyn_defconfig
diff --git a/board/silica/pengwyn/Makefile b/board/silica/pengwyn/Makefile
deleted file mode 100644
index c34b9b1dd8..0000000000
--- a/board/silica/pengwyn/Makefile
+++ /dev/null
@@ -1,11 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0+
-#
-# Makefile
-#
-# Copyright (C) 2011 Texas Instruments Incorporated - http://www.ti.com/
-
-ifeq ($(CONFIG_SKIP_LOWLEVEL_INIT),)
-obj-y	:= mux.o
-endif
-
-obj-y	+= board.o
diff --git a/board/silica/pengwyn/board.c b/board/silica/pengwyn/board.c
deleted file mode 100644
index e3c9d9e755..0000000000
--- a/board/silica/pengwyn/board.c
+++ /dev/null
@@ -1,204 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+
-/*
- * board.c
- *
- * Copyright (C) 2013 Lothar Felten <lothar.felten@gmail.com>
- */
-
-#include <common.h>
-#include <env.h>
-#include <init.h>
-#include <net.h>
-#include <serial.h>
-#include <asm/arch/cpu.h>
-#include <asm/arch/hardware.h>
-#include <asm/arch/ddr_defs.h>
-#include <asm/arch/clock.h>
-#include <asm/arch/sys_proto.h>
-#include <i2c.h>
-#include <phy.h>
-#include <cpsw.h>
-#include "board.h"
-
-DECLARE_GLOBAL_DATA_PTR;
-
-static struct ctrl_dev *cdev = (struct ctrl_dev *)CTRL_DEVICE_BASE;
-
-#if defined(CONFIG_SPL_BUILD)
-
-/* DDR3 RAM timings */
-static const struct ddr_data ddr3_data = {
-	.datardsratio0 = MT41K128MJT187E_RD_DQS,
-	.datawdsratio0 = MT41K128MJT187E_WR_DQS,
-	.datafwsratio0 = MT41K128MJT187E_PHY_FIFO_WE,
-	.datawrsratio0 = MT41K128MJT187E_PHY_WR_DATA,
-};
-
-static const struct cmd_control ddr3_cmd_ctrl_data = {
-	.cmd0csratio = MT41K128MJT187E_RATIO,
-	.cmd0iclkout = MT41K128MJT187E_INVERT_CLKOUT,
-	.cmd1csratio = MT41K128MJT187E_RATIO,
-	.cmd1iclkout = MT41K128MJT187E_INVERT_CLKOUT,
-	.cmd2csratio = MT41K128MJT187E_RATIO,
-	.cmd2iclkout = MT41K128MJT187E_INVERT_CLKOUT,
-};
-
-static struct emif_regs ddr3_emif_reg_data = {
-	.sdram_config = MT41K128MJT187E_EMIF_SDCFG,
-	.ref_ctrl = MT41K128MJT187E_EMIF_SDREF,
-	.sdram_tim1 = MT41K128MJT187E_EMIF_TIM1,
-	.sdram_tim2 = MT41K128MJT187E_EMIF_TIM2,
-	.sdram_tim3 = MT41K128MJT187E_EMIF_TIM3,
-	.zq_config = MT41K128MJT187E_ZQ_CFG,
-	.emif_ddr_phy_ctlr_1 = MT41K128MJT187E_EMIF_READ_LATENCY |
-				PHY_EN_DYN_PWRDN,
-};
-
-const struct ctrl_ioregs ddr3_ioregs = {
-	.cm0ioctl		= MT41K128MJT187E_IOCTRL_VALUE,
-	.cm1ioctl		= MT41K128MJT187E_IOCTRL_VALUE,
-	.cm2ioctl		= MT41K128MJT187E_IOCTRL_VALUE,
-	.dt0ioctl		= MT41K128MJT187E_IOCTRL_VALUE,
-	.dt1ioctl		= MT41K128MJT187E_IOCTRL_VALUE,
-};
-
-#ifdef CONFIG_SPL_OS_BOOT
-int spl_start_uboot(void)
-{
-	/* break into full u-boot on 'c' */
-	return serial_tstc() && serial_getc() == 'c';
-}
-#endif
-
-#define OSC	(V_OSCK/1000000)
-const struct dpll_params dpll_ddr_266 = {
-		266, OSC-1, 1, -1, -1, -1, -1};
-const struct dpll_params dpll_ddr_303 = {
-		303, OSC-1, 1, -1, -1, -1, -1};
-const struct dpll_params dpll_ddr_400 = {
-		400, OSC-1, 1, -1, -1, -1, -1};
-
-void am33xx_spl_board_init(void)
-{
-	/*
-	 * The pengwyn board uses the TPS650250 PMIC  without I2C
-	 * interface and will output the following fixed voltages:
-	 * DCDC1=3V3 (IO) DCDC2=1V5 (DDR) DCDC3=1V26 (Vmpu)
-	 * VLDO1=1V8 (IO) VLDO2=1V8(IO)
-	 * Vcore=1V1 is fixed, generated by TPS62231
-	 */
-
-	/* Get the frequency */
-	dpll_mpu_opp100.m = am335x_get_efuse_mpu_max_freq(cdev);
-
-	/* Set CORE Frequencies to OPP100 */
-	do_setup_dpll(&dpll_core_regs, &dpll_core_opp100);
-
-	/* 720MHz cpu, this might change on newer board revisions */
-	dpll_mpu_opp100.m = MPUPLL_M_720;
-	do_setup_dpll(&dpll_mpu_regs, &dpll_mpu_opp100);
-}
-
-const struct dpll_params *get_dpll_ddr_params(void)
-{
-	/* future configs can return other clock settings */
-	return &dpll_ddr_303;
-}
-
-void set_uart_mux_conf(void)
-{
-	enable_uart0_pin_mux();
-}
-
-void set_mux_conf_regs(void)
-{
-	enable_board_pin_mux();
-}
-
-void sdram_init(void)
-{
-	config_ddr(303, &ddr3_ioregs, &ddr3_data,
-		   &ddr3_cmd_ctrl_data, &ddr3_emif_reg_data, 0);
-}
-#endif /* if CONFIG_SPL_BUILD */
-
-/*
- * Basic board specific setup.  Pinmux has been handled already.
- */
-int board_init(void)
-{
-	i2c_init(CONFIG_SYS_I2C_SPEED, CONFIG_SYS_I2C_SLAVE);
-	gd->bd->bi_boot_params = CONFIG_SYS_SDRAM_BASE + 0x100;
-	gpmc_init();
-	return 0;
-}
-
-#ifdef CONFIG_DRIVER_TI_CPSW
-static void cpsw_control(int enabled)
-{
-	/* VTP can be added here */
-	return;
-}
-
-static struct cpsw_slave_data cpsw_slaves[] = {
-	{
-		.slave_reg_ofs	= 0x208,
-		.sliver_reg_ofs	= 0xd80,
-		.phy_addr	= 1,
-		.phy_if		= PHY_INTERFACE_MODE_MII,
-	},
-};
-
-static struct cpsw_platform_data cpsw_data = {
-	.mdio_base		= CPSW_MDIO_BASE,
-	.cpsw_base		= CPSW_BASE,
-	.mdio_div		= 0xff,
-	.channels		= 8,
-	.cpdma_reg_ofs		= 0x800,
-	.slaves			= 1,
-	.slave_data		= cpsw_slaves,
-	.ale_reg_ofs		= 0xd00,
-	.ale_entries		= 1024,
-	.host_port_reg_ofs	= 0x108,
-	.hw_stats_reg_ofs	= 0x900,
-	.bd_ram_ofs		= 0x2000,
-	.mac_control		= (1 << 5),
-	.control		= cpsw_control,
-	.host_port_num		= 0,
-	.version		= CPSW_CTRL_VERSION_2,
-};
-
-int board_eth_init(bd_t *bis)
-{
-	int rv, n = 0;
-	uint8_t mac_addr[6];
-	uint32_t mac_hi, mac_lo;
-
-	if (!eth_env_get_enetaddr("ethaddr", mac_addr)) {
-		printf("<ethaddr> not set. Reading from E-fuse\n");
-		/* try reading mac address from efuse */
-		mac_lo = readl(&cdev->macid0l);
-		mac_hi = readl(&cdev->macid0h);
-		mac_addr[0] = mac_hi & 0xFF;
-		mac_addr[1] = (mac_hi & 0xFF00) >> 8;
-		mac_addr[2] = (mac_hi & 0xFF0000) >> 16;
-		mac_addr[3] = (mac_hi & 0xFF000000) >> 24;
-		mac_addr[4] = mac_lo & 0xFF;
-		mac_addr[5] = (mac_lo & 0xFF00) >> 8;
-
-		if (is_valid_ethaddr(mac_addr))
-			eth_env_set_enetaddr("ethaddr", mac_addr);
-		else
-			return n;
-	}
-
-	writel(MII_MODE_ENABLE, &cdev->miisel);
-
-	rv = cpsw_register(&cpsw_data);
-	if (rv < 0)
-		printf("Error %d registering CPSW switch\n", rv);
-	else
-		n += rv;
-	return n;
-}
-#endif /* if CONFIG_DRIVER_TI_CPSW */
diff --git a/board/silica/pengwyn/board.h b/board/silica/pengwyn/board.h
deleted file mode 100644
index 3d5ce6d393..0000000000
--- a/board/silica/pengwyn/board.h
+++ /dev/null
@@ -1,14 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0+ */
-/*
- * board.h
- *
- * Copyright (C) 2013 Lothar Felten <lothar.felten@gmail.com>
- */
-
-#ifndef _BOARD_H_
-#define _BOARD_H_
-
-void enable_uart0_pin_mux(void);
-void enable_board_pin_mux(void);
-
-#endif
diff --git a/board/silica/pengwyn/mux.c b/board/silica/pengwyn/mux.c
deleted file mode 100644
index 7583e833ed..0000000000
--- a/board/silica/pengwyn/mux.c
+++ /dev/null
@@ -1,97 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+
-/*
- * mux.c
- *
- * Copyright (C) 2013 Lothar Felten <lothar.felten@gmail.com>
- */
-
-#include <common.h>
-#include <asm/arch/sys_proto.h>
-#include <asm/arch/hardware.h>
-#include <asm/arch/mux.h>
-#include <asm/io.h>
-#include "board.h"
-
-/* UART0 pins E15(rx),E16(tx) [E17(rts),E18(cts)] */
-static struct module_pin_mux uart0_pin_mux[] = {
-	{OFFSET(uart0_rxd), (MODE(0) | PULLUP_EN | RXACTIVE)},	/* UART0_RXD */
-	{OFFSET(uart0_txd), (MODE(0) | PULLUDEN)},		/* UART0_TXD */
-	{-1},
-};
-
-/* unused: UART1 pins D15(tx),D16(rx),D17(cts),D18(rts) */
-
-/* I2C pins C16(scl)/C17(sda) */
-static struct module_pin_mux i2c0_pin_mux[] = {
-	{OFFSET(i2c0_sda), (MODE(0) | RXACTIVE |
-					PULLUDEN | SLEWCTRL)}, /* I2C0_DATA */
-	{OFFSET(i2c0_scl), (MODE(0) | RXACTIVE |
-					PULLUDEN | SLEWCTRL)}, /* I2C0_SCLK */
-	{-1},
-};
-
-/* MMC0 pins */
-static struct module_pin_mux mmc0_pin_mux[] = {
-	{OFFSET(mmc0_dat3), (MODE(0) | RXACTIVE | PULLUP_EN)}, /* MMC0_DAT3 */
-	{OFFSET(mmc0_dat2), (MODE(0) | RXACTIVE | PULLUP_EN)}, /* MMC0_DAT2 */
-	{OFFSET(mmc0_dat1), (MODE(0) | RXACTIVE | PULLUP_EN)}, /* MMC0_DAT1 */
-	{OFFSET(mmc0_dat0), (MODE(0) | RXACTIVE | PULLUP_EN)}, /* MMC0_DAT0 */
-	{OFFSET(mmc0_clk), (MODE(0) | RXACTIVE | PULLUP_EN)},  /* MMC0_CLK */
-	{OFFSET(mmc0_cmd), (MODE(0) | RXACTIVE | PULLUP_EN)},  /* MMC0_CMD */
-	{OFFSET(spi0_cs1), (MODE(5) | RXACTIVE | PULLUP_EN)},  /* MMC0_CD */
-	{-1},
-};
-
-/* MII pins */
-static struct module_pin_mux mii1_pin_mux[] = {
-	{OFFSET(mii1_rxerr), MODE(0) | RXACTIVE},	/* MII1_RXERR */
-	{OFFSET(mii1_txen), MODE(0)},			/* MII1_TXEN */
-	{OFFSET(mii1_rxdv), MODE(0) | RXACTIVE},	/* MII1_RXDV */
-	{OFFSET(mii1_txd3), MODE(0)},			/* MII1_TXD3 */
-	{OFFSET(mii1_txd2), MODE(0)},			/* MII1_TXD2 */
-	{OFFSET(mii1_txd1), MODE(0)},			/* MII1_TXD1 */
-	{OFFSET(mii1_txd0), MODE(0)},			/* MII1_TXD0 */
-	{OFFSET(mii1_txclk), MODE(0) | RXACTIVE},	/* MII1_TXCLK */
-	{OFFSET(mii1_rxclk), MODE(0) | RXACTIVE},	/* MII1_RXCLK */
-	{OFFSET(mii1_rxd3), MODE(0) | RXACTIVE},	/* MII1_RXD3 */
-	{OFFSET(mii1_rxd2), MODE(0) | RXACTIVE},	/* MII1_RXD2 */
-	{OFFSET(mii1_rxd1), MODE(0) | RXACTIVE},	/* MII1_RXD1 */
-	{OFFSET(mii1_rxd0), MODE(0) | RXACTIVE},	/* MII1_RXD0 */
-	{OFFSET(mdio_data), MODE(0) | RXACTIVE | PULLUP_EN}, /* MDIO_DATA */
-	{OFFSET(mdio_clk), MODE(0) | PULLUP_EN},	/* MDIO_CLK */
-	{-1},
-};
-
-/* NAND pins */
-static struct module_pin_mux nand_pin_mux[] = {
-	{OFFSET(gpmc_ad0), (MODE(0) | PULLUP_EN | RXACTIVE)},	/* NAND AD0 */
-	{OFFSET(gpmc_ad1), (MODE(0) | PULLUP_EN | RXACTIVE)},	/* NAND AD1 */
-	{OFFSET(gpmc_ad2), (MODE(0) | PULLUP_EN | RXACTIVE)},	/* NAND AD2 */
-	{OFFSET(gpmc_ad3), (MODE(0) | PULLUP_EN | RXACTIVE)},	/* NAND AD3 */
-	{OFFSET(gpmc_ad4), (MODE(0) | PULLUP_EN | RXACTIVE)},	/* NAND AD4 */
-	{OFFSET(gpmc_ad5), (MODE(0) | PULLUP_EN | RXACTIVE)},	/* NAND AD5 */
-	{OFFSET(gpmc_ad6), (MODE(0) | PULLUP_EN | RXACTIVE)},	/* NAND AD6 */
-	{OFFSET(gpmc_ad7), (MODE(0) | PULLUP_EN | RXACTIVE)},	/* NAND AD7 */
-	{OFFSET(gpmc_wait0), (MODE(0) | RXACTIVE | PULLUP_EN)}, /* NAND WAIT */
-	{OFFSET(gpmc_wpn), (MODE(7) | PULLUP_EN | RXACTIVE)},	/* NAND_WPN */
-	{OFFSET(gpmc_csn0), (MODE(0) | PULLUDEN)},	/* NAND_CS0 */
-	{OFFSET(gpmc_advn_ale), (MODE(0) | PULLUDEN)}, /* NAND_ADV_ALE */
-	{OFFSET(gpmc_oen_ren), (MODE(0) | PULLUDEN)},	/* NAND_OE */
-	{OFFSET(gpmc_wen), (MODE(0) | PULLUDEN)},	/* NAND_WEN */
-	{OFFSET(gpmc_be0n_cle), (MODE(0) | PULLUDEN)},	/* NAND_BE_CLE */
-	{-1},
-};
-
-void enable_uart0_pin_mux(void)
-{
-	configure_module_pin_mux(uart0_pin_mux);
-}
-
-void enable_board_pin_mux()
-{
-	configure_module_pin_mux(i2c0_pin_mux);
-	configure_module_pin_mux(uart0_pin_mux);
-	configure_module_pin_mux(mii1_pin_mux);
-	configure_module_pin_mux(mmc0_pin_mux);
-	configure_module_pin_mux(nand_pin_mux);
-}
diff --git a/configs/pengwyn_defconfig b/configs/pengwyn_defconfig
deleted file mode 100644
index 3d0fcf3ea0..0000000000
--- a/configs/pengwyn_defconfig
+++ /dev/null
@@ -1,67 +0,0 @@
-CONFIG_ARM=y
-CONFIG_ARCH_CPU_INIT=y
-CONFIG_ARCH_OMAP2PLUS=y
-CONFIG_SPL_GPIO_SUPPORT=y
-CONFIG_SPL_LIBCOMMON_SUPPORT=y
-CONFIG_SPL_LIBGENERIC_SUPPORT=y
-CONFIG_ENV_SIZE=0x4000
-CONFIG_AM33XX=y
-CONFIG_TARGET_PENGWYN=y
-CONFIG_SPL_MMC_SUPPORT=y
-CONFIG_SPL_SERIAL_SUPPORT=y
-CONFIG_SPL=y
-CONFIG_SPL_FS_FAT=y
-CONFIG_SPL_LIBDISK_SUPPORT=y
-CONFIG_DISTRO_DEFAULTS=y
-# CONFIG_USE_BOOTCOMMAND is not set
-CONFIG_SYS_CONSOLE_INFO_QUIET=y
-CONFIG_VERSION_VARIABLE=y
-CONFIG_ARCH_MISC_INIT=y
-CONFIG_SPL_ENV_SUPPORT=y
-CONFIG_SPL_ETH_SUPPORT=y
-CONFIG_SPL_FS_EXT4=y
-CONFIG_SPL_I2C_SUPPORT=y
-CONFIG_SPL_MTD_SUPPORT=y
-CONFIG_SPL_NET_SUPPORT=y
-CONFIG_SPL_NET_VCI_STRING="AM335x U-Boot SPL"
-CONFIG_SPL_OS_BOOT=y
-CONFIG_SPL_POWER_SUPPORT=y
-CONFIG_SPL_WATCHDOG_SUPPORT=y
-CONFIG_SPL_YMODEM_SUPPORT=y
-CONFIG_CMD_SPL=y
-CONFIG_CMD_SPL_NAND_OFS=0x240000
-CONFIG_CMD_ASKENV=y
-CONFIG_CMD_EEPROM=y
-# CONFIG_CMD_FLASH is not set
-CONFIG_CMD_GPIO=y
-CONFIG_CMD_I2C=y
-CONFIG_CMD_MMC=y
-CONFIG_CMD_NAND=y
-CONFIG_CMD_SPI=y
-CONFIG_CMD_USB=y
-# CONFIG_CMD_SETEXPR is not set
-CONFIG_CMD_WOL=y
-CONFIG_CMD_EXT4_WRITE=y
-CONFIG_CMD_MTDPARTS=y
-CONFIG_MTDIDS_DEFAULT="nand0=omap2-nand.0"
-CONFIG_MTDPARTS_DEFAULT="mtdparts=omap2-nand.0:512k(SPL),512k(SPL.backup1),512k(SPL.backup2),512k(SPL.backup3),1536k(u-boot),512k(u-boot-spl-os),512k(u-boot-env),5m(kernel),-(rootfs)"
-CONFIG_CMD_DIAG=y
-CONFIG_ENV_IS_IN_NAND=y
-CONFIG_SYS_RELOC_GD_ENV_ADDR=y
-CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG=y
-CONFIG_MMC_OMAP_HS=y
-CONFIG_MTD=y
-CONFIG_MTD_RAW_NAND=y
-CONFIG_PHY_NATSEMI=y
-CONFIG_PHY_REALTEK=y
-CONFIG_MII=y
-CONFIG_DRIVER_TI_CPSW=y
-CONFIG_SPI=y
-CONFIG_OMAP3_SPI=y
-CONFIG_USB=y
-CONFIG_USB_MUSB_HOST=y
-CONFIG_USB_MUSB_GADGET=y
-CONFIG_USB_MUSB_DSPS=y
-CONFIG_USB_GADGET=y
-CONFIG_FAT_WRITE=y
-CONFIG_OF_LIBFDT=y
diff --git a/include/configs/pengwyn.h b/include/configs/pengwyn.h
deleted file mode 100644
index 17d1981b4e..0000000000
--- a/include/configs/pengwyn.h
+++ /dev/null
@@ -1,166 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0+ */
-/*
- * pengwyn.h
- *
- * Copyright (C) 2013 Lothar Felten <lothar.felten@gmail.com>
- *
- * based on am335x_evm.h, Copyright (C) 2011 Texas Instruments Inc.
- */
-
-#ifndef __CONFIG_PENGWYN_H
-#define __CONFIG_PENGWYN_H
-
-
-#include <configs/ti_am335x_common.h>
-
-/* Clock Defines */
-#define V_OSCK				24000000
-#define V_SCLK				V_OSCK
-
-/* set env size */
-
-#ifndef CONFIG_SPL_BUILD
-#define CONFIG_EXTRA_ENV_SETTINGS \
-	"loadaddr=0x80200000\0" \
-	"fdtaddr=0x80F80000\0" \
-	"bootpart=0:2\0" \
-	"bootdir=/boot\0" \
-	"bootfile=zImage\0" \
-	"fdtfile=am335x-pengwyn.dtb\0" \
-	"console=ttyO0,115200n8\0" \
-	"optargs=\0" \
-	"mmcdev=0\0" \
-	"mmcroot=/dev/mmcblk0p2 ro\0" \
-	"mmcrootfstype=ext4 rootwait\0" \
-	"rootpath=/export/rootfs\0" \
-	"nfsopts=nolock\0" \
-	"static_ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}:${hostname}" \
-		"::off\0" \
-	"mmcargs=setenv bootargs console=${console} " \
-		"${optargs} " \
-		"root=${mmcroot} " \
-		"rootfstype=${mmcrootfstype}\0" \
-	"netargs=setenv bootargs console=${console} " \
-		"${optargs} " \
-		"root=/dev/nfs " \
-		"nfsroot=${serverip}:${rootpath},${nfsopts} rw " \
-		"ip=dhcp\0" \
-	"bootenv=uEnv.txt\0" \
-	"loadbootenv=load mmc ${mmcdev} ${loadaddr} ${bootenv}\0" \
-	"importbootenv=echo Importing environment from mmc ...; " \
-		"env import -t $loadaddr $filesize\0" \
-	"loadimage=load mmc ${bootpart} ${loadaddr} ${bootdir}/${bootfile}\0" \
-	"loadfdt=load mmc ${bootpart} ${fdtaddr} ${bootdir}/${fdtfile}\0" \
-	"mmcloados=run mmcargs; " \
-		"bootz ${loadaddr} - ${fdtaddr};\0" \
-	"mmcboot=mmc dev ${mmcdev}; " \
-		"if mmc rescan; then " \
-			"echo SD/MMC found on device ${mmcdev};" \
-			"if run loadbootenv; then " \
-				"echo Loaded environment from ${bootenv};" \
-				"run importbootenv;" \
-			"fi;" \
-			"if test -n $uenvcmd; then " \
-				"echo Running uenvcmd ...;" \
-				"run uenvcmd;" \
-			"fi;" \
-			"if run loadimage; then " \
-				"run loadfdt;" \
-				"run mmcloados;" \
-			"fi;" \
-		"fi;\0" \
-	"netboot=echo Booting from network ...; " \
-		"setenv autoload no; " \
-		"dhcp; " \
-		"tftp ${loadaddr} ${bootfile}; " \
-		"tftp ${fdtaddr} ${fdtfile}; " \
-		"run netargs; " \
-		"bootz ${loadaddr} - ${fdtaddr}\0" \
-	"mtdids=" CONFIG_MTDIDS_DEFAULT "\0" \
-	"mtdparts=" CONFIG_MTDPARTS_DEFAULT "\0" \
-	"nandargs=setenv bootargs console=${console} " \
-		"${optargs} " \
-		"root=${nandroot} " \
-		"rootfstype=${nandrootfstype}\0" \
-	"nandroot=ubi0:rootfs rw ubi.mtd=7,2048\0" \
-	"nandrootfstype=ubifs rootwait=1\0" \
-	"nandboot=echo Booting from nand ...; " \
-		"run nandargs; " \
-		"nand read ${fdtaddr} u-boot-spl-os; " \
-		"nand read ${loadaddr} kernel; " \
-		"bootz ${loadaddr} - ${fdtaddr}\0"
-#endif
-
-#define CONFIG_BOOTCOMMAND \
-	"run mmcboot;" \
-	"run nandboot;"
-
-/* NS16550 Configuration: primary UART via FTDI */
-#define CONFIG_SYS_NS16550_COM1		0x44e09000
-
-/* I2C Configuration */
-#define	CONFIG_SYS_I2C_SPEED		100000
-#define CONFIG_ENV_EEPROM_IS_ON_I2C
-#define CONFIG_SYS_I2C_EEPROM_ADDR	0x50
-#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN	2
-
-/* SPL */
-
-/* NAND support */
-
-/* NAND Configuration. */
-#define CONFIG_SYS_NAND_5_ADDR_CYCLE
-#define CONFIG_SYS_NAND_PAGE_COUNT	(CONFIG_SYS_NAND_BLOCK_SIZE / \
-					 CONFIG_SYS_NAND_PAGE_SIZE)
-#define CONFIG_SYS_NAND_PAGE_SIZE	4096
-#define CONFIG_SYS_NAND_OOBSIZE		224
-#define CONFIG_SYS_NAND_ONFI_DETECTION
-#define CONFIG_SYS_NAND_BLOCK_SIZE	(128*4096)
-#define CONFIG_SYS_NAND_BAD_BLOCK_POS	NAND_LARGE_BADBLOCK_POS
-#define CONFIG_SYS_NAND_ECCPOS		{   2,   3,   4,   5,   6,   7,   8,   9,  10,  11,  12,  13,  14,  15,  16,  17,\
-					   18,  19,  20,  21,  22,  23,  24,  25,  26,  27,  28,  29,  30,  31,  32,  33,\
-					   34,  35,  36,  37,  38,  39,  40,  41,  42,  43,  44,  45,  46,  47,  48,  49,\
-					   50,  51,  52,  53,  54,  55,  56,  57,  58,  59,  60,  61,  62,  63,  64,  65,\
-					   66,  67,  68,  69,  70,  71,  72,  73,  74,  75,  76,  77,  78,  79,  80,  81,\
-					   82,  83,  84,  85,  86,  87,  88,  89,  90,  91,  92,  93,  94,  95,  96,  97,\
-					   98,  99, 100, 101, 102, 103, 104, 105, 106, 107, 108, 109, 110, 111, 112, 113,\
-					  114, 115, 116, 117, 118, 119, 120, 121, 122, 123, 124, 125, 126, 127, 128, 129, 130, 131, 132, 133,\
-					  134, 135, 136, 137, 138, 139, 140, 141, 142, 143, 144, 145, 146, 147, 148, 149, 150, 151, 152, 153,\
-					  154, 155, 156, 157, 158, 159, 160, 161, 162, 163, 164, 165, 166, 167, 168, 169, 170, 171, 172, 173,\
-					  174, 175, 176, 177, 178, 179, 180, 181, 182, 183, 184, 185, 186, 187, 188, 189, 190, 191, 192, 193,\
-					  194, 195, 196, 197, 198, 199, 200, 201, 202, 203, 204, 205, 206, 207, 208, 209}
-
-#define CONFIG_SYS_NAND_ECCSIZE		512
-#define CONFIG_SYS_NAND_ECCBYTES	26
-#define CONFIG_SYS_NAND_ECCSTEPS	8
-#define	CONFIG_SYS_NAND_ECCTOTAL	(CONFIG_SYS_NAND_ECCBYTES * \
-						CONFIG_SYS_NAND_ECCSTEPS)
-#define CONFIG_NAND_OMAP_ECCSCHEME	OMAP_ECC_BCH16_CODE_HW
-/* END NAND Configuration. */
-
-#define CONFIG_SYS_NAND_U_BOOT_START	CONFIG_SYS_TEXT_BASE
-/* #define CONFIG_SYS_NAND_U_BOOT_OFFS	0x80000 */
-#define CONFIG_SYS_NAND_U_BOOT_OFFS	0x200000
-
-/* Size must be a multiple of Nand erase size (524288 b) */
-#define CONFIG_SYS_ENV_SECT_SIZE	(128 << 10)	/* 128 KiB */
-/* NAND: SPL falcon mode configs */
-#ifdef CONFIG_SPL_OS_BOOT
-#define CONFIG_SYS_NAND_SPL_KERNEL_OFFS	0x280000
-#endif
-
-/*
- * USB configuration.  We enable MUSB support, both for host and for
- * gadget.  We set USB0 as peripheral and USB1 as host, based on the
- * board schematic and physical port wired to each.  Then for host we
- * add mass storage support.
- */
-#define CONFIG_AM335X_USB0
-#define CONFIG_AM335X_USB0_MODE	MUSB_PERIPHERAL
-#define CONFIG_AM335X_USB1
-#define CONFIG_AM335X_USB1_MODE MUSB_HOST
-
-/* Network */
-#define CONFIG_PHY_RESET	1
-
-#endif	/* ! __CONFIG_PENGWYN_H */
-- 
2.25.1