All of lore.kernel.org
 help / color / mirror / Atom feed
From: "Pali Rohár" <pali@kernel.org>
To: "Thomas Petazzoni" <thomas.petazzoni@bootlin.com>,
	"Lorenzo Pieralisi" <lorenzo.pieralisi@arm.com>,
	"Andrew Murray" <amurray@thegoodpenguin.co.uk>,
	"Bjorn Helgaas" <bhelgaas@google.com>,
	"Marek Behún" <marek.behun@nic.cz>,
	"Remi Pommarel" <repk@triplefau.lt>,
	"Tomasz Maciej Nowak" <tmn505@gmail.com>,
	Xogium <contact@xogium.me>
Cc: linux-pci@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
	linux-kernel@vger.kernel.org
Subject: [PATCH] PCI: aardvark: Don't touch PCIe registers if no card connected
Date: Thu, 28 May 2020 16:31:41 +0200	[thread overview]
Message-ID: <20200528143141.29956-1-pali@kernel.org> (raw)

When there is no PCIe card connected and advk_pcie_rd_conf() or
advk_pcie_wr_conf() is called for PCI bus which doesn't belong to emulated
root bridge, the aardvark driver throws the following error message:

  advk-pcie d0070000.pcie: config read/write timed out

Obviously accessing PCIe registers of disconnected card is not possible.

Extend check in advk_pcie_valid_device() function for validating
availability of PCIe bus. If PCIe link is down, then the device is marked
as Not Found and the driver does not try to access these registers.

Signed-off-by: Pali Rohár <pali@kernel.org>
---
 drivers/pci/controller/pci-aardvark.c | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/drivers/pci/controller/pci-aardvark.c b/drivers/pci/controller/pci-aardvark.c
index 90ff291c24f0..53a4cfd7d377 100644
--- a/drivers/pci/controller/pci-aardvark.c
+++ b/drivers/pci/controller/pci-aardvark.c
@@ -644,6 +644,9 @@ static bool advk_pcie_valid_device(struct advk_pcie *pcie, struct pci_bus *bus,
 	if ((bus->number == pcie->root_bus_nr) && PCI_SLOT(devfn) != 0)
 		return false;
 
+	if (bus->number != pcie->root_bus_nr && !advk_pcie_link_up(pcie))
+		return false;
+
 	return true;
 }
 
-- 
2.20.1


WARNING: multiple messages have this Message-ID
From: "Pali Rohár" <pali@kernel.org>
To: "Thomas Petazzoni" <thomas.petazzoni@bootlin.com>,
	"Lorenzo Pieralisi" <lorenzo.pieralisi@arm.com>,
	"Andrew Murray" <amurray@thegoodpenguin.co.uk>,
	"Bjorn Helgaas" <bhelgaas@google.com>,
	"Marek Behún" <marek.behun@nic.cz>,
	"Remi Pommarel" <repk@triplefau.lt>,
	"Tomasz Maciej Nowak" <tmn505@gmail.com>,
	Xogium <contact@xogium.me>
Cc: linux-pci@vger.kernel.org, linux-kernel@vger.kernel.org,
	linux-arm-kernel@lists.infradead.org
Subject: [PATCH] PCI: aardvark: Don't touch PCIe registers if no card connected
Date: Thu, 28 May 2020 16:31:41 +0200	[thread overview]
Message-ID: <20200528143141.29956-1-pali@kernel.org> (raw)

When there is no PCIe card connected and advk_pcie_rd_conf() or
advk_pcie_wr_conf() is called for PCI bus which doesn't belong to emulated
root bridge, the aardvark driver throws the following error message:

  advk-pcie d0070000.pcie: config read/write timed out

Obviously accessing PCIe registers of disconnected card is not possible.

Extend check in advk_pcie_valid_device() function for validating
availability of PCIe bus. If PCIe link is down, then the device is marked
as Not Found and the driver does not try to access these registers.

Signed-off-by: Pali Rohár <pali@kernel.org>
---
 drivers/pci/controller/pci-aardvark.c | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/drivers/pci/controller/pci-aardvark.c b/drivers/pci/controller/pci-aardvark.c
index 90ff291c24f0..53a4cfd7d377 100644
--- a/drivers/pci/controller/pci-aardvark.c
+++ b/drivers/pci/controller/pci-aardvark.c
@@ -644,6 +644,9 @@ static bool advk_pcie_valid_device(struct advk_pcie *pcie, struct pci_bus *bus,
 	if ((bus->number == pcie->root_bus_nr) && PCI_SLOT(devfn) != 0)
 		return false;
 
+	if (bus->number != pcie->root_bus_nr && !advk_pcie_link_up(pcie))
+		return false;
+
 	return true;
 }
 
-- 
2.20.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

             reply	other threads:[~2020-05-28 14:32 UTC|newest]

Thread overview: 64+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-05-28 14:31 Pali Rohár [this message]
2020-05-28 14:31 ` Pali Rohár
2020-05-28 16:26 ` Bjorn Helgaas
2020-05-28 16:26   ` Bjorn Helgaas
2020-05-28 16:38   ` Pali Rohár
2020-05-28 16:38     ` Pali Rohár
2020-05-28 16:49     ` Bjorn Helgaas
2020-05-28 16:49       ` Bjorn Helgaas
2020-05-29  8:30       ` Pali Rohár
2020-05-29  8:30         ` Pali Rohár
2020-06-30 12:31         ` Pali Rohár
2020-06-30 12:31           ` Pali Rohár
2020-06-30 13:51     ` Bjorn Helgaas
2020-06-30 13:51       ` Bjorn Helgaas
2020-06-30 14:04       ` Pali Rohár
2020-06-30 14:04         ` Pali Rohár
2020-06-30 14:58         ` Bjorn Helgaas
2020-06-30 14:58           ` Bjorn Helgaas
2020-07-01  8:08           ` Pali Rohár
2020-07-01  8:08             ` Pali Rohár
2020-07-01  8:20 ` [PATCH v2] " Pali Rohár
2020-07-01  8:20   ` Pali Rohár
2020-07-01 21:34   ` Bjorn Helgaas
2020-07-01 21:34     ` Bjorn Helgaas
2020-07-02  8:23     ` Pali Rohár
2020-07-02  8:23       ` Pali Rohár
2020-07-02  8:30 ` [PATCH v3] " Pali Rohár
2020-07-02  8:30   ` Pali Rohár
2020-07-09 11:35   ` Lorenzo Pieralisi
2020-07-09 11:35     ` Lorenzo Pieralisi
2020-07-09 12:22     ` Pali Rohár
2020-07-09 12:22       ` Pali Rohár
2020-07-09 14:47       ` Lorenzo Pieralisi
2020-07-09 14:47         ` Lorenzo Pieralisi
2020-07-09 15:09         ` Pali Rohár
2020-07-09 15:09           ` Pali Rohár
2020-07-10  9:18           ` Lorenzo Pieralisi
2020-07-10  9:18             ` Lorenzo Pieralisi
2020-07-10 15:44             ` Pali Rohár
2020-07-10 15:44               ` Pali Rohár
2020-07-10 16:08               ` Bjorn Helgaas
2020-07-10 16:08                 ` Bjorn Helgaas
2020-07-10 19:30                 ` Pali Rohár
2020-07-10 19:30                   ` Pali Rohár
2020-07-10 20:08                   ` Bjorn Helgaas
2020-07-10 20:08                     ` Bjorn Helgaas
2020-07-13  8:27             ` Pali Rohár
2020-07-13  8:27               ` Pali Rohár
2020-07-13 11:23               ` Lorenzo Pieralisi
2020-07-13 11:23                 ` Lorenzo Pieralisi
2020-07-13 14:50                 ` Pali Rohár
2020-07-13 14:50                   ` Pali Rohár
2020-07-13 16:41                   ` Lorenzo Pieralisi
2020-07-13 16:41                     ` Lorenzo Pieralisi
2020-07-14  7:38                     ` Pali Rohár
2020-07-14  7:38                       ` Pali Rohár
2020-07-15 12:17                 ` Pali Rohár
2020-07-15 12:17                   ` Pali Rohár
2020-07-15 16:21                   ` Lorenzo Pieralisi
2020-07-15 16:21                     ` Lorenzo Pieralisi
2020-07-21  8:57                     ` Pali Rohár
2020-07-21  8:57                       ` Pali Rohár
2020-07-21 10:48                       ` Lorenzo Pieralisi
2020-07-21 10:48                         ` Lorenzo Pieralisi

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20200528143141.29956-1-pali@kernel.org \
    --to=pali@kernel.org \
    --cc=amurray@thegoodpenguin.co.uk \
    --cc=bhelgaas@google.com \
    --cc=contact@xogium.me \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-pci@vger.kernel.org \
    --cc=lorenzo.pieralisi@arm.com \
    --cc=marek.behun@nic.cz \
    --cc=repk@triplefau.lt \
    --cc=thomas.petazzoni@bootlin.com \
    --cc=tmn505@gmail.com \
    --subject='Re: [PATCH] PCI: aardvark: Don'\''t touch PCIe registers if no card connected' \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.