[PATCH net-next] net: phy: mscc: fix PHYs using the vsc8574_probe

[Antoine Tenart <antoine.tenart@bootlin.com>]

PHYs using the vsc8574_probe fail to be initialized and their
config_init return -EIO leading to errors like:
"could not attach PHY: -5".

This is because when the conversion of the MSCC PHY driver to use the
shared PHY package helpers was done, the base address retrieval and the
base PHY read and write helpers in the driver were modified. In
particular, the base address retrieval logic was moved from the
config_init to the probe. But the vsc8574_probe was forgotten. This
patch fixes it.

Fixes: deb04e9c0ff2 ("net: phy: mscc: use phy_package_shared")
Signed-off-by: Antoine Tenart <antoine.tenart@bootlin.com>
---

Hello,

While the patch has a Fixes: tag, it's sent to net-next as commit
deb04e9c0ff2 only is in net-next. This patch do not have to be
backported to any prior version.

Thanks!
Antoine

 drivers/net/phy/mscc/mscc_main.c | 4 ++++
 1 file changed, 4 insertions(+)

diff --git a/drivers/net/phy/mscc/mscc_main.c b/drivers/net/phy/mscc/mscc_main.c
index 550acf547ced..7ed0285206d0 100644
--- a/drivers/net/phy/mscc/mscc_main.c
+++ b/drivers/net/phy/mscc/mscc_main.c
@@ -1977,6 +1977,10 @@ static int vsc8574_probe(struct phy_device *phydev)
 
 	phydev->priv = vsc8531;
 
+	vsc8584_get_base_addr(phydev);
+	devm_phy_package_join(&phydev->mdio.dev, phydev,
+			      vsc8531->base_addr, 0);
+
 	vsc8531->nleds = 4;
 	vsc8531->supp_led_modes = VSC8584_SUPP_LED_MODES;
 	vsc8531->hw_stats = vsc8584_hw_stats;
-- 
2.26.2