All of lore.kernel.org
 help / color / mirror / Atom feed
From: Peter Chen <peter.chen@nxp.com>
To: balbi@kernel.org
Cc: linux-usb@vger.kernel.org, linux-imx@nxp.com, pawell@cadence.com,
	rogerq@ti.com, gregkh@linuxfoundation.org, jun.li@nxp.com,
	Peter Chen <peter.chen@nxp.com>
Subject: [PATCH 1/3] usb: cdns3: ep0: fix some endian issues
Date: Wed,  3 Jun 2020 14:53:54 +0800	[thread overview]
Message-ID: <20200603065356.14124-2-peter.chen@nxp.com> (raw)
In-Reply-To: <20200603065356.14124-1-peter.chen@nxp.com>

It is found by sparse.

Reported-by: kbuild test robot <lkp@intel.com>
Signed-off-by: Peter Chen <peter.chen@nxp.com>
---
 drivers/usb/cdns3/ep0.c | 30 +++++++++++++++---------------
 1 file changed, 15 insertions(+), 15 deletions(-)

diff --git a/drivers/usb/cdns3/ep0.c b/drivers/usb/cdns3/ep0.c
index 82645a2a0f52..2465a84e8fee 100644
--- a/drivers/usb/cdns3/ep0.c
+++ b/drivers/usb/cdns3/ep0.c
@@ -37,18 +37,18 @@ static void cdns3_ep0_run_transfer(struct cdns3_device *priv_dev,
 	struct cdns3_usb_regs __iomem *regs = priv_dev->regs;
 	struct cdns3_endpoint *priv_ep = priv_dev->eps[0];
 
-	priv_ep->trb_pool[0].buffer = TRB_BUFFER(dma_addr);
-	priv_ep->trb_pool[0].length = TRB_LEN(length);
+	priv_ep->trb_pool[0].buffer = cpu_to_le32(TRB_BUFFER(dma_addr));
+	priv_ep->trb_pool[0].length = cpu_to_le32(TRB_LEN(length));
 
 	if (zlp) {
-		priv_ep->trb_pool[0].control = TRB_CYCLE | TRB_TYPE(TRB_NORMAL);
-		priv_ep->trb_pool[1].buffer = TRB_BUFFER(dma_addr);
-		priv_ep->trb_pool[1].length = TRB_LEN(0);
-		priv_ep->trb_pool[1].control = TRB_CYCLE | TRB_IOC |
-		    TRB_TYPE(TRB_NORMAL);
+		priv_ep->trb_pool[0].control = cpu_to_le32(TRB_CYCLE | TRB_TYPE(TRB_NORMAL));
+		priv_ep->trb_pool[1].buffer = cpu_to_le32(TRB_BUFFER(dma_addr));
+		priv_ep->trb_pool[1].length = cpu_to_le32(TRB_LEN(0));
+		priv_ep->trb_pool[1].control = cpu_to_le32(TRB_CYCLE | TRB_IOC |
+		    TRB_TYPE(TRB_NORMAL));
 	} else {
-		priv_ep->trb_pool[0].control = TRB_CYCLE | TRB_IOC |
-		    TRB_TYPE(TRB_NORMAL);
+		priv_ep->trb_pool[0].control = cpu_to_le32(TRB_CYCLE | TRB_IOC |
+		    TRB_TYPE(TRB_NORMAL));
 		priv_ep->trb_pool[1].control = 0;
 	}
 
@@ -264,11 +264,11 @@ static int cdns3_req_ep0_get_status(struct cdns3_device *priv_dev,
 	case USB_RECIP_INTERFACE:
 		return cdns3_ep0_delegate_req(priv_dev, ctrl);
 	case USB_RECIP_ENDPOINT:
-		index = cdns3_ep_addr_to_index(ctrl->wIndex);
+		index = cdns3_ep_addr_to_index(le16_to_cpu(ctrl->wIndex));
 		priv_ep = priv_dev->eps[index];
 
 		/* check if endpoint is stalled or stall is pending */
-		cdns3_select_ep(priv_dev, ctrl->wIndex);
+		cdns3_select_ep(priv_dev, le16_to_cpu(ctrl->wIndex));
 		if (EP_STS_STALL(readl(&priv_dev->regs->ep_sts)) ||
 		    (priv_ep->flags & EP_STALL_PENDING))
 			usb_status =  BIT(USB_ENDPOINT_HALT);
@@ -380,10 +380,10 @@ static int cdns3_ep0_feature_handle_endpoint(struct cdns3_device *priv_dev,
 	if (!(ctrl->wIndex & ~USB_DIR_IN))
 		return 0;
 
-	index = cdns3_ep_addr_to_index(ctrl->wIndex);
+	index = cdns3_ep_addr_to_index(le16_to_cpu(ctrl->wIndex));
 	priv_ep = priv_dev->eps[index];
 
-	cdns3_select_ep(priv_dev, ctrl->wIndex);
+	cdns3_select_ep(priv_dev, le16_to_cpu(ctrl->wIndex));
 
 	if (set)
 		__cdns3_gadget_ep_set_halt(priv_ep);
@@ -444,7 +444,7 @@ static int cdns3_req_ep0_set_sel(struct cdns3_device *priv_dev,
 	if (priv_dev->gadget.state < USB_STATE_ADDRESS)
 		return -EINVAL;
 
-	if (ctrl_req->wLength != 6) {
+	if (le16_to_cpu(ctrl_req->wLength) != 6) {
 		dev_err(priv_dev->dev, "Set SEL should be 6 bytes, got %d\n",
 			ctrl_req->wLength);
 		return -EINVAL;
@@ -468,7 +468,7 @@ static int cdns3_req_ep0_set_isoch_delay(struct cdns3_device *priv_dev,
 	if (ctrl_req->wIndex || ctrl_req->wLength)
 		return -EINVAL;
 
-	priv_dev->isoch_delay = ctrl_req->wValue;
+	priv_dev->isoch_delay = le16_to_cpu(ctrl_req->wValue);
 
 	return 0;
 }
-- 
2.17.1


  reply	other threads:[~2020-06-03  6:53 UTC|newest]

Thread overview: 8+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-06-03  6:53 [PATCH 0/3] usb: cdns3: fix some endian issues Peter Chen
2020-06-03  6:53 ` Peter Chen [this message]
2020-07-09  6:45   ` [PATCH 1/3] usb: cdns3: ep0: " Felipe Balbi
2020-07-09  7:02     ` Peter Chen
2020-07-09  7:11       ` Felipe Balbi
2020-06-03  6:53 ` [PATCH 2/3] usb: cdns3: trace: " Peter Chen
2020-06-03  6:53 ` [PATCH 3/3] usb: cdns3: gadget: " Peter Chen
2020-07-07  6:12 ` [PATCH 0/3] usb: cdns3: " Peter Chen

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20200603065356.14124-2-peter.chen@nxp.com \
    --to=peter.chen@nxp.com \
    --cc=balbi@kernel.org \
    --cc=gregkh@linuxfoundation.org \
    --cc=jun.li@nxp.com \
    --cc=linux-imx@nxp.com \
    --cc=linux-usb@vger.kernel.org \
    --cc=pawell@cadence.com \
    --cc=rogerq@ti.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.