All of lore.kernel.org
 help / color / mirror / Atom feed
From: Patrick Delaunay <patrick.delaunay@st.com>
To: u-boot@lists.denx.de
Subject: [PATCH v2 08/11] gpio: stmfx: add ops set_dir_flag
Date: Thu, 4 Jun 2020 14:30:30 +0200	[thread overview]
Message-ID: <20200604123033.25499-6-patrick.delaunay@st.com> (raw)
In-Reply-To: <20200604123033.25499-1-patrick.delaunay@st.com>

Manage the flags for GPIO configuration:
- open_drain, push_pull
- pull_up, pull_down

Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
---

Changes in v2: None

 drivers/pinctrl/pinctrl-stmfx.c | 37 +++++++++++++++++++++++++++++++++
 1 file changed, 37 insertions(+)

diff --git a/drivers/pinctrl/pinctrl-stmfx.c b/drivers/pinctrl/pinctrl-stmfx.c
index 5d15424b84..88df9e61a7 100644
--- a/drivers/pinctrl/pinctrl-stmfx.c
+++ b/drivers/pinctrl/pinctrl-stmfx.c
@@ -153,6 +153,42 @@ static int stmfx_gpio_direction_output(struct udevice *dev,
 	return stmfx_write_reg(dev, STMFX_REG_GPIO_DIR, offset, 1);
 }
 
+static int stmfx_gpio_set_dir_flags(struct udevice *dev, unsigned int offset,
+				    ulong flags)
+{
+	int ret = -ENOTSUPP;
+
+	if (flags & GPIOD_IS_OUT) {
+		if (flags & GPIOD_OPEN_SOURCE)
+			return -ENOTSUPP;
+		if (flags & GPIOD_OPEN_DRAIN)
+			ret = stmfx_conf_set_type(dev, offset, 0);
+		else /* PUSH-PULL */
+			ret = stmfx_conf_set_type(dev, offset, 1);
+		if (ret)
+			return ret;
+		ret = stmfx_gpio_direction_output(dev, offset,
+						  GPIOD_FLAGS_OUTPUT(flags));
+	} else if (flags & GPIOD_IS_IN) {
+		ret = stmfx_gpio_direction_input(dev, offset);
+		if (ret)
+			return ret;
+		if (flags & GPIOD_PULL_UP) {
+			ret = stmfx_conf_set_type(dev, offset, 1);
+			if (ret)
+				return ret;
+			ret = stmfx_conf_set_pupd(dev, offset, 1);
+		} else if (flags & GPIOD_PULL_DOWN) {
+			ret = stmfx_conf_set_type(dev, offset, 1);
+			if (ret)
+				return ret;
+			ret = stmfx_conf_set_pupd(dev, offset, 0);
+		}
+	}
+
+	return ret;
+}
+
 static int stmfx_gpio_probe(struct udevice *dev)
 {
 	struct gpio_dev_priv *uc_priv = dev_get_uclass_priv(dev);
@@ -181,6 +217,7 @@ static const struct dm_gpio_ops stmfx_gpio_ops = {
 	.get_function = stmfx_gpio_get_function,
 	.direction_input = stmfx_gpio_direction_input,
 	.direction_output = stmfx_gpio_direction_output,
+	.set_dir_flags = stmfx_gpio_set_dir_flags,
 };
 
 U_BOOT_DRIVER(stmfx_gpio) = {
-- 
2.17.1

  parent reply	other threads:[~2020-06-04 12:30 UTC|newest]

Thread overview: 23+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-06-04 12:30 [PATCH v2 00/11] stm32mp1: activate gpio hog support and add new pinctrl ops Patrick Delaunay
2020-06-04 12:30 ` [PATCH v2 01/11] configs: stm32mp1: activate CONFIG_GPIO_HOG Patrick Delaunay
2020-07-02  7:41   ` [Uboot-stm32] " Patrice CHOTARD
2020-06-04 12:30 ` [PATCH v2 02/11] board: stm32mp1: update the gpio hog support Patrick Delaunay
2020-07-02  7:42   ` [Uboot-stm32] " Patrice CHOTARD
2020-06-04 12:30 ` [PATCH v2 03/11] gpio: stm32: add ops set_dir_flags Patrick Delaunay
2020-07-02  7:48   ` Patrice CHOTARD
2020-06-04 12:30 ` [PATCH v2 04/11] gpio: stm32: add ops get_dir_flags Patrick Delaunay
2020-07-02  7:51   ` Patrice CHOTARD
2020-06-04 12:30 ` [PATCH v2 05/11] gpio: stmfx: move function to prepare new ops introduction Patrick Delaunay
2020-07-02  7:51   ` Patrice CHOTARD
2020-06-04 12:30 ` [PATCH v2 06/11] gpio: stmfx: rename function used to change pin configuration Patrick Delaunay
2020-07-02  7:51   ` Patrice CHOTARD
2020-06-04 12:30 ` [PATCH v2 07/11] gpio: stmfx: add function stmfx_read_reg and stmfx_write_reg Patrick Delaunay
2020-07-02  7:56   ` Patrice CHOTARD
2020-06-04 12:30 ` Patrick Delaunay [this message]
2020-07-02  7:58   ` [PATCH v2 08/11] gpio: stmfx: add ops set_dir_flag Patrice CHOTARD
2020-06-04 12:30 ` [PATCH v2 09/11] gpio: stmfx: add ops get_dir_flags Patrick Delaunay
2020-07-02  7:58   ` Patrice CHOTARD
2020-06-04 12:30 ` [PATCH v2 10/11] pinctrl: stmfx: add information on pin configuration Patrick Delaunay
2020-07-02  7:59   ` Patrice CHOTARD
2020-06-04 12:30 ` [PATCH v2 11/11] pinctrl: stm32: " Patrick Delaunay
2020-07-02  8:02   ` Patrice CHOTARD

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20200604123033.25499-6-patrick.delaunay@st.com \
    --to=patrick.delaunay@st.com \
    --cc=u-boot@lists.denx.de \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.