From: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
To: Andy Gross <agross@kernel.org>,
Bjorn Andersson <bjorn.andersson@linaro.org>,
Rob Herring <robh+dt@kernel.org>
Cc: linux-arm-msm@vger.kernel.org, devicetree@vger.kernel.org,
patches@linaro.org, linaro-kernel@lists.linaro.org
Subject: [PATCH] arm64: dts: qcom: sm8250: add I2C and SPI nodes
Date: Sat, 6 Jun 2020 16:13:00 +0300 [thread overview]
Message-ID: <20200606131300.3874987-1-dmitry.baryshkov@linaro.org> (raw)
Much like SDM845 each serial engine has 4 pins attached. Add all
possible I2C and SPI nodes for all 20 serial engines.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
---
arch/arm64/boot/dts/qcom/sm8250.dtsi | 1147 ++++++++++++++++++++++++++
1 file changed, 1147 insertions(+)
diff --git a/arch/arm64/boot/dts/qcom/sm8250.dtsi b/arch/arm64/boot/dts/qcom/sm8250.dtsi
index 384839cb036c..37d3abeabf87 100644
--- a/arch/arm64/boot/dts/qcom/sm8250.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm8250.dtsi
@@ -15,6 +15,49 @@ / {
#address-cells = <2>;
#size-cells = <2>;
+ aliases {
+ i2c0 = &i2c0;
+ i2c1 = &i2c1;
+ i2c2 = &i2c2;
+ i2c3 = &i2c3;
+ i2c4 = &i2c4;
+ i2c5 = &i2c5;
+ i2c6 = &i2c6;
+ i2c7 = &i2c7;
+ i2c8 = &i2c8;
+ i2c9 = &i2c9;
+ i2c10 = &i2c10;
+ i2c11 = &i2c11;
+ i2c12 = &i2c12;
+ i2c13 = &i2c13;
+ i2c14 = &i2c14;
+ i2c15 = &i2c15;
+ i2c16 = &i2c16;
+ i2c17 = &i2c17;
+ i2c18 = &i2c18;
+ i2c19 = &i2c19;
+ spi0 = &spi0;
+ spi1 = &spi1;
+ spi2 = &spi2;
+ spi3 = &spi3;
+ spi4 = &spi4;
+ spi5 = &spi5;
+ spi6 = &spi6;
+ spi7 = &spi7;
+ spi8 = &spi8;
+ spi9 = &spi9;
+ spi10 = &spi10;
+ spi11 = &spi11;
+ spi12 = &spi12;
+ spi13 = &spi13;
+ spi14 = &spi14;
+ spi15 = &spi15;
+ spi16 = &spi16;
+ spi17 = &spi17;
+ spi18 = &spi18;
+ spi19 = &spi19;
+ };
+
chosen { };
clocks {
@@ -294,6 +337,394 @@ gcc: clock-controller@100000 {
clocks = <&rpmhcc RPMH_CXO_CLK>, <&sleep_clk>;
};
+ qupv3_id_2: geniqup@8c0000 {
+ compatible = "qcom,geni-se-qup";
+ reg = <0x0 0x008c0000 0x0 0x6000>;
+ clock-names = "m-ahb", "s-ahb";
+ clocks = <&gcc GCC_QUPV3_WRAP_2_M_AHB_CLK>,
+ <&gcc GCC_QUPV3_WRAP_2_S_AHB_CLK>;
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges;
+ status = "disabled";
+
+ i2c14: i2c@880000 {
+ compatible = "qcom,geni-i2c";
+ reg = <0 0x00880000 0 0x4000>;
+ clock-names = "se";
+ clocks = <&gcc GCC_QUPV3_WRAP2_S0_CLK>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&qup_i2c14_default>;
+ interrupts = <GIC_SPI 373 IRQ_TYPE_LEVEL_HIGH>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ spi14: spi@880000 {
+ compatible = "qcom,geni-spi";
+ reg = <0 0x00880000 0 0x4000>;
+ clock-names = "se";
+ clocks = <&gcc GCC_QUPV3_WRAP2_S0_CLK>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&qup_spi14_default>;
+ interrupts = <GIC_SPI 373 IRQ_TYPE_LEVEL_HIGH>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ i2c15: i2c@884000 {
+ compatible = "qcom,geni-i2c";
+ reg = <0 0x00884000 0 0x4000>;
+ clock-names = "se";
+ clocks = <&gcc GCC_QUPV3_WRAP2_S1_CLK>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&qup_i2c15_default>;
+ interrupts = <GIC_SPI 583 IRQ_TYPE_LEVEL_HIGH>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ spi15: spi@884000 {
+ compatible = "qcom,geni-spi";
+ reg = <0 0x00884000 0 0x4000>;
+ clock-names = "se";
+ clocks = <&gcc GCC_QUPV3_WRAP2_S1_CLK>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&qup_spi15_default>;
+ interrupts = <GIC_SPI 583 IRQ_TYPE_LEVEL_HIGH>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ i2c16: i2c@888000 {
+ compatible = "qcom,geni-i2c";
+ reg = <0 0x00888000 0 0x4000>;
+ clock-names = "se";
+ clocks = <&gcc GCC_QUPV3_WRAP2_S2_CLK>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&qup_i2c16_default>;
+ interrupts = <GIC_SPI 584 IRQ_TYPE_LEVEL_HIGH>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ spi16: spi@888000 {
+ compatible = "qcom,geni-spi";
+ reg = <0 0x00888000 0 0x4000>;
+ clock-names = "se";
+ clocks = <&gcc GCC_QUPV3_WRAP2_S2_CLK>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&qup_spi16_default>;
+ interrupts = <GIC_SPI 584 IRQ_TYPE_LEVEL_HIGH>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ i2c17: i2c@88c000 {
+ compatible = "qcom,geni-i2c";
+ reg = <0 0x0088c000 0 0x4000>;
+ clock-names = "se";
+ clocks = <&gcc GCC_QUPV3_WRAP2_S3_CLK>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&qup_i2c17_default>;
+ interrupts = <GIC_SPI 585 IRQ_TYPE_LEVEL_HIGH>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ spi17: spi@88c000 {
+ compatible = "qcom,geni-spi";
+ reg = <0 0x0088c000 0 0x4000>;
+ clock-names = "se";
+ clocks = <&gcc GCC_QUPV3_WRAP2_S3_CLK>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&qup_spi17_default>;
+ interrupts = <GIC_SPI 585 IRQ_TYPE_LEVEL_HIGH>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ i2c18: i2c@890000 {
+ compatible = "qcom,geni-i2c";
+ reg = <0 0x00890000 0 0x4000>;
+ clock-names = "se";
+ clocks = <&gcc GCC_QUPV3_WRAP2_S4_CLK>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&qup_i2c18_default>;
+ interrupts = <GIC_SPI 586 IRQ_TYPE_LEVEL_HIGH>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ spi18: spi@890000 {
+ compatible = "qcom,geni-spi";
+ reg = <0 0x00890000 0 0x4000>;
+ clock-names = "se";
+ clocks = <&gcc GCC_QUPV3_WRAP2_S4_CLK>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&qup_spi18_default>;
+ interrupts = <GIC_SPI 586 IRQ_TYPE_LEVEL_HIGH>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ i2c19: i2c@894000 {
+ compatible = "qcom,geni-i2c";
+ reg = <0 0x00894000 0 0x4000>;
+ clock-names = "se";
+ clocks = <&gcc GCC_QUPV3_WRAP2_S5_CLK>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&qup_i2c19_default>;
+ interrupts = <GIC_SPI 587 IRQ_TYPE_LEVEL_HIGH>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ spi19: spi@894000 {
+ compatible = "qcom,geni-spi";
+ reg = <0 0x00894000 0 0x4000>;
+ clock-names = "se";
+ clocks = <&gcc GCC_QUPV3_WRAP2_S5_CLK>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&qup_spi19_default>;
+ interrupts = <GIC_SPI 587 IRQ_TYPE_LEVEL_HIGH>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+ };
+
+ qupv3_id_0: geniqup@9c0000 {
+ compatible = "qcom,geni-se-qup";
+ reg = <0x0 0x009c0000 0x0 0x6000>;
+ clock-names = "m-ahb", "s-ahb";
+ clocks = <&gcc GCC_QUPV3_WRAP_0_M_AHB_CLK>,
+ <&gcc GCC_QUPV3_WRAP_0_S_AHB_CLK>;
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges;
+ status = "disabled";
+
+ i2c0: i2c@980000 {
+ compatible = "qcom,geni-i2c";
+ reg = <0 0x00980000 0 0x4000>;
+ clock-names = "se";
+ clocks = <&gcc GCC_QUPV3_WRAP0_S0_CLK>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&qup_i2c0_default>;
+ interrupts = <GIC_SPI 601 IRQ_TYPE_LEVEL_HIGH>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ spi0: spi@980000 {
+ compatible = "qcom,geni-spi";
+ reg = <0 0x00980000 0 0x4000>;
+ clock-names = "se";
+ clocks = <&gcc GCC_QUPV3_WRAP0_S0_CLK>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&qup_spi0_default>;
+ interrupts = <GIC_SPI 601 IRQ_TYPE_LEVEL_HIGH>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ i2c1: i2c@984000 {
+ compatible = "qcom,geni-i2c";
+ reg = <0 0x00984000 0 0x4000>;
+ clock-names = "se";
+ clocks = <&gcc GCC_QUPV3_WRAP0_S1_CLK>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&qup_i2c1_default>;
+ interrupts = <GIC_SPI 602 IRQ_TYPE_LEVEL_HIGH>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ spi1: spi@984000 {
+ compatible = "qcom,geni-spi";
+ reg = <0 0x00984000 0 0x4000>;
+ clock-names = "se";
+ clocks = <&gcc GCC_QUPV3_WRAP0_S1_CLK>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&qup_spi1_default>;
+ interrupts = <GIC_SPI 602 IRQ_TYPE_LEVEL_HIGH>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ i2c2: i2c@988000 {
+ compatible = "qcom,geni-i2c";
+ reg = <0 0x00988000 0 0x4000>;
+ clock-names = "se";
+ clocks = <&gcc GCC_QUPV3_WRAP0_S2_CLK>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&qup_i2c2_default>;
+ interrupts = <GIC_SPI 603 IRQ_TYPE_LEVEL_HIGH>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ spi2: spi@988000 {
+ compatible = "qcom,geni-spi";
+ reg = <0 0x00988000 0 0x4000>;
+ clock-names = "se";
+ clocks = <&gcc GCC_QUPV3_WRAP0_S2_CLK>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&qup_spi2_default>;
+ interrupts = <GIC_SPI 603 IRQ_TYPE_LEVEL_HIGH>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ i2c3: i2c@98c000 {
+ compatible = "qcom,geni-i2c";
+ reg = <0 0x0098c000 0 0x4000>;
+ clock-names = "se";
+ clocks = <&gcc GCC_QUPV3_WRAP0_S3_CLK>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&qup_i2c3_default>;
+ interrupts = <GIC_SPI 604 IRQ_TYPE_LEVEL_HIGH>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ spi3: spi@98c000 {
+ compatible = "qcom,geni-spi";
+ reg = <0 0x0098c000 0 0x4000>;
+ clock-names = "se";
+ clocks = <&gcc GCC_QUPV3_WRAP0_S3_CLK>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&qup_spi3_default>;
+ interrupts = <GIC_SPI 604 IRQ_TYPE_LEVEL_HIGH>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ i2c4: i2c@990000 {
+ compatible = "qcom,geni-i2c";
+ reg = <0 0x00990000 0 0x4000>;
+ clock-names = "se";
+ clocks = <&gcc GCC_QUPV3_WRAP0_S4_CLK>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&qup_i2c4_default>;
+ interrupts = <GIC_SPI 605 IRQ_TYPE_LEVEL_HIGH>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ spi4: spi@990000 {
+ compatible = "qcom,geni-spi";
+ reg = <0 0x00990000 0 0x4000>;
+ clock-names = "se";
+ clocks = <&gcc GCC_QUPV3_WRAP0_S4_CLK>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&qup_spi4_default>;
+ interrupts = <GIC_SPI 605 IRQ_TYPE_LEVEL_HIGH>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ i2c5: i2c@994000 {
+ compatible = "qcom,geni-i2c";
+ reg = <0 0x00994000 0 0x4000>;
+ clock-names = "se";
+ clocks = <&gcc GCC_QUPV3_WRAP0_S5_CLK>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&qup_i2c5_default>;
+ interrupts = <GIC_SPI 606 IRQ_TYPE_LEVEL_HIGH>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ spi5: spi@994000 {
+ compatible = "qcom,geni-spi";
+ reg = <0 0x00994000 0 0x4000>;
+ clock-names = "se";
+ clocks = <&gcc GCC_QUPV3_WRAP0_S5_CLK>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&qup_spi5_default>;
+ interrupts = <GIC_SPI 606 IRQ_TYPE_LEVEL_HIGH>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ i2c6: i2c@998000 {
+ compatible = "qcom,geni-i2c";
+ reg = <0 0x00998000 0 0x4000>;
+ clock-names = "se";
+ clocks = <&gcc GCC_QUPV3_WRAP0_S6_CLK>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&qup_i2c6_default>;
+ interrupts = <GIC_SPI 607 IRQ_TYPE_LEVEL_HIGH>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ spi6: spi@998000 {
+ compatible = "qcom,geni-spi";
+ reg = <0 0x00998000 0 0x4000>;
+ clock-names = "se";
+ clocks = <&gcc GCC_QUPV3_WRAP0_S6_CLK>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&qup_spi6_default>;
+ interrupts = <GIC_SPI 607 IRQ_TYPE_LEVEL_HIGH>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ i2c7: i2c@99c000 {
+ compatible = "qcom,geni-i2c";
+ reg = <0 0x0099c000 0 0x4000>;
+ clock-names = "se";
+ clocks = <&gcc GCC_QUPV3_WRAP0_S7_CLK>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&qup_i2c7_default>;
+ interrupts = <GIC_SPI 608 IRQ_TYPE_LEVEL_HIGH>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ spi7: spi@99c000 {
+ compatible = "qcom,geni-spi";
+ reg = <0 0x0099c000 0 0x4000>;
+ clock-names = "se";
+ clocks = <&gcc GCC_QUPV3_WRAP0_S7_CLK>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&qup_spi7_default>;
+ interrupts = <GIC_SPI 608 IRQ_TYPE_LEVEL_HIGH>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+ };
+
qupv3_id_1: geniqup@ac0000 {
compatible = "qcom,geni-se-qup";
reg = <0x0 0x00ac0000 0x0 0x6000>;
@@ -304,6 +735,136 @@ qupv3_id_1: geniqup@ac0000 {
ranges;
status = "disabled";
+ i2c8: i2c@a80000 {
+ compatible = "qcom,geni-i2c";
+ reg = <0 0x00a80000 0 0x4000>;
+ clock-names = "se";
+ clocks = <&gcc GCC_QUPV3_WRAP1_S0_CLK>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&qup_i2c8_default>;
+ interrupts = <GIC_SPI 353 IRQ_TYPE_LEVEL_HIGH>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ spi8: spi@a80000 {
+ compatible = "qcom,geni-spi";
+ reg = <0 0x00a80000 0 0x4000>;
+ clock-names = "se";
+ clocks = <&gcc GCC_QUPV3_WRAP1_S0_CLK>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&qup_spi8_default>;
+ interrupts = <GIC_SPI 353 IRQ_TYPE_LEVEL_HIGH>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ i2c9: i2c@a84000 {
+ compatible = "qcom,geni-i2c";
+ reg = <0 0x00a84000 0 0x4000>;
+ clock-names = "se";
+ clocks = <&gcc GCC_QUPV3_WRAP1_S1_CLK>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&qup_i2c9_default>;
+ interrupts = <GIC_SPI 354 IRQ_TYPE_LEVEL_HIGH>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ spi9: spi@a84000 {
+ compatible = "qcom,geni-spi";
+ reg = <0 0x00a84000 0 0x4000>;
+ clock-names = "se";
+ clocks = <&gcc GCC_QUPV3_WRAP1_S1_CLK>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&qup_spi9_default>;
+ interrupts = <GIC_SPI 354 IRQ_TYPE_LEVEL_HIGH>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ i2c10: i2c@a88000 {
+ compatible = "qcom,geni-i2c";
+ reg = <0 0x00a88000 0 0x4000>;
+ clock-names = "se";
+ clocks = <&gcc GCC_QUPV3_WRAP1_S2_CLK>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&qup_i2c10_default>;
+ interrupts = <GIC_SPI 355 IRQ_TYPE_LEVEL_HIGH>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ spi10: spi@a88000 {
+ compatible = "qcom,geni-spi";
+ reg = <0 0x00a88000 0 0x4000>;
+ clock-names = "se";
+ clocks = <&gcc GCC_QUPV3_WRAP1_S2_CLK>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&qup_spi10_default>;
+ interrupts = <GIC_SPI 355 IRQ_TYPE_LEVEL_HIGH>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ i2c11: i2c@a8c000 {
+ compatible = "qcom,geni-i2c";
+ reg = <0 0x00a8c000 0 0x4000>;
+ clock-names = "se";
+ clocks = <&gcc GCC_QUPV3_WRAP1_S3_CLK>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&qup_i2c11_default>;
+ interrupts = <GIC_SPI 356 IRQ_TYPE_LEVEL_HIGH>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ spi11: spi@a8c000 {
+ compatible = "qcom,geni-spi";
+ reg = <0 0x00a8c000 0 0x4000>;
+ clock-names = "se";
+ clocks = <&gcc GCC_QUPV3_WRAP1_S3_CLK>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&qup_spi11_default>;
+ interrupts = <GIC_SPI 356 IRQ_TYPE_LEVEL_HIGH>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ i2c12: i2c@a90000 {
+ compatible = "qcom,geni-i2c";
+ reg = <0 0x00a90000 0 0x4000>;
+ clock-names = "se";
+ clocks = <&gcc GCC_QUPV3_WRAP1_S4_CLK>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&qup_i2c12_default>;
+ interrupts = <GIC_SPI 357 IRQ_TYPE_LEVEL_HIGH>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ spi12: spi@a90000 {
+ compatible = "qcom,geni-spi";
+ reg = <0 0x00a90000 0 0x4000>;
+ clock-names = "se";
+ clocks = <&gcc GCC_QUPV3_WRAP1_S4_CLK>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&qup_spi12_default>;
+ interrupts = <GIC_SPI 357 IRQ_TYPE_LEVEL_HIGH>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
uart2: serial@a90000 {
compatible = "qcom,geni-debug-uart";
reg = <0x0 0x00a90000 0x0 0x4000>;
@@ -312,6 +873,32 @@ uart2: serial@a90000 {
interrupts = <GIC_SPI 357 IRQ_TYPE_LEVEL_HIGH>;
status = "disabled";
};
+
+ i2c13: i2c@a94000 {
+ compatible = "qcom,geni-i2c";
+ reg = <0 0x00a94000 0 0x4000>;
+ clock-names = "se";
+ clocks = <&gcc GCC_QUPV3_WRAP1_S5_CLK>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&qup_i2c13_default>;
+ interrupts = <GIC_SPI 358 IRQ_TYPE_LEVEL_HIGH>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ spi13: spi@a94000 {
+ compatible = "qcom,geni-spi";
+ reg = <0 0x00a94000 0 0x4000>;
+ clock-names = "se";
+ clocks = <&gcc GCC_QUPV3_WRAP1_S5_CLK>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&qup_spi13_default>;
+ interrupts = <GIC_SPI 358 IRQ_TYPE_LEVEL_HIGH>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
};
ufs_mem_hc: ufshc@1d84000 {
@@ -512,6 +1099,566 @@ tlmm: pinctrl@f100000 {
#interrupt-cells = <2>;
gpio-ranges = <&tlmm 0 0 180>;
wakeup-parent = <&pdc>;
+
+ qup_i2c0_default: qup-i2c0-default {
+ mux {
+ pins = "gpio28", "gpio29";
+ function = "qup0";
+ };
+
+ config {
+ pins = "gpio28", "gpio29";
+ drive-strength = <2>;
+ bias-disable;
+ };
+ };
+
+ qup_i2c1_default: qup-i2c1-default {
+ pinmux {
+ pins = "gpio4", "gpio5";
+ function = "qup1";
+ };
+
+ config {
+ pins = "gpio4", "gpio5";
+ drive-strength = <2>;
+ bias-disable;
+ };
+ };
+
+ qup_i2c2_default: qup-i2c2-default {
+ mux {
+ pins = "gpio115", "gpio116";
+ function = "qup2";
+ };
+
+ config {
+ pins = "gpio115", "gpio116";
+ drive-strength = <2>;
+ bias-disable;
+ };
+ };
+
+ qup_i2c3_default: qup-i2c3-default {
+ mux {
+ pins = "gpio119", "gpio120";
+ function = "qup3";
+ };
+
+ config {
+ pins = "gpio119", "gpio120";
+ drive-strength = <2>;
+ bias-disable;
+ };
+ };
+
+ qup_i2c4_default: qup-i2c4-default {
+ mux {
+ pins = "gpio8", "gpio9";
+ function = "qup4";
+ };
+
+ config {
+ pins = "gpio8", "gpio9";
+ drive-strength = <2>;
+ bias-disable;
+ };
+ };
+
+ qup_i2c5_default: qup-i2c5-default {
+ mux {
+ pins = "gpio12", "gpio13";
+ function = "qup5";
+ };
+
+ config {
+ pins = "gpio12", "gpio13";
+ drive-strength = <2>;
+ bias-disable;
+ };
+ };
+
+ qup_i2c6_default: qup-i2c6-default {
+ mux {
+ pins = "gpio16", "gpio17";
+ function = "qup6";
+ };
+
+ config {
+ pins = "gpio16", "gpio17";
+ drive-strength = <2>;
+ bias-disable;
+ };
+ };
+
+ qup_i2c7_default: qup-i2c7-default {
+ mux {
+ pins = "gpio20", "gpio21";
+ function = "qup7";
+ };
+
+ config {
+ pins = "gpio20", "gpio21";
+ drive-strength = <2>;
+ bias-disable;
+ };
+ };
+
+ qup_i2c8_default: qup-i2c8-default {
+ mux {
+ pins = "gpio24", "gpio25";
+ function = "qup8";
+ };
+
+ config {
+ pins = "gpio24", "gpio25";
+ drive-strength = <2>;
+ bias-disable;
+ };
+ };
+
+ qup_i2c9_default: qup-i2c9-default {
+ mux {
+ pins = "gpio125", "gpio126";
+ function = "qup9";
+ };
+
+ config {
+ pins = "gpio125", "gpio126";
+ drive-strength = <2>;
+ bias-disable;
+ };
+ };
+
+ qup_i2c10_default: qup-i2c10-default {
+ mux {
+ pins = "gpio129", "gpio130";
+ function = "qup10";
+ };
+
+ config {
+ pins = "gpio129", "gpio130";
+ drive-strength = <2>;
+ bias-disable;
+ };
+ };
+
+ qup_i2c11_default: qup-i2c11-default {
+ mux {
+ pins = "gpio60", "gpio61";
+ function = "qup11";
+ };
+
+ config {
+ pins = "gpio60", "gpio61";
+ drive-strength = <2>;
+ bias-disable;
+ };
+ };
+
+ qup_i2c12_default: qup-i2c12-default {
+ mux {
+ pins = "gpio32", "gpio33";
+ function = "qup12";
+ };
+
+ config {
+ pins = "gpio32", "gpio33";
+ drive-strength = <2>;
+ bias-disable;
+ };
+ };
+
+ qup_i2c13_default: qup-i2c13-default {
+ mux {
+ pins = "gpio36", "gpio37";
+ function = "qup13";
+ };
+
+ config {
+ pins = "gpio36", "gpio37";
+ drive-strength = <2>;
+ bias-disable;
+ };
+ };
+
+ qup_i2c14_default: qup-i2c14-default {
+ mux {
+ pins = "gpio40", "gpio41";
+ function = "qup14";
+ };
+
+ config {
+ pins = "gpio40", "gpio41";
+ drive-strength = <2>;
+ bias-disable;
+ };
+ };
+
+ qup_i2c15_default: qup-i2c15-default {
+ mux {
+ pins = "gpio44", "gpio45";
+ function = "qup15";
+ };
+
+ config {
+ pins = "gpio44", "gpio45";
+ drive-strength = <2>;
+ bias-disable;
+ };
+ };
+
+ qup_i2c16_default: qup-i2c16-default {
+ mux {
+ pins = "gpio48", "gpio49";
+ function = "qup16";
+ };
+
+ config {
+ pins = "gpio48", "gpio49";
+ drive-strength = <2>;
+ bias-disable;
+ };
+ };
+
+ qup_i2c17_default: qup-i2c17-default {
+ mux {
+ pins = "gpio52", "gpio53";
+ function = "qup17";
+ };
+
+ config {
+ pins = "gpio52", "gpio53";
+ drive-strength = <2>;
+ bias-disable;
+ };
+ };
+
+ qup_i2c18_default: qup-i2c18-default {
+ mux {
+ pins = "gpio56", "gpio57";
+ function = "qup18";
+ };
+
+ config {
+ pins = "gpio56", "gpio57";
+ drive-strength = <2>;
+ bias-disable;
+ };
+ };
+
+ qup_i2c19_default: qup-i2c19-default {
+ mux {
+ pins = "gpio0", "gpio1";
+ function = "qup19";
+ };
+
+ config {
+ pins = "gpio0", "gpio1";
+ drive-strength = <2>;
+ bias-disable;
+ };
+ };
+
+ qup_spi0_default: qup-spi0-default {
+ mux {
+ pins = "gpio28", "gpio29",
+ "gpio30", "gpio31";
+ function = "qup0";
+ };
+
+ config {
+ pins = "gpio28", "gpio29",
+ "gpio30", "gpio31";
+ drive-strength = <6>;
+ bias-disable;
+ };
+ };
+
+ qup_spi1_default: qup-spi1-default {
+ mux {
+ pins = "gpio4", "gpio5",
+ "gpio6", "gpio7";
+ function = "qup1";
+ };
+
+ config {
+ pins = "gpio4", "gpio5",
+ "gpio6", "gpio7";
+ drive-strength = <6>;
+ bias-disable;
+ };
+ };
+
+ qup_spi2_default: qup-spi2-default {
+ mux {
+ pins = "gpio115", "gpio116",
+ "gpio117", "gpio118";
+ function = "qup2";
+ };
+
+ config {
+ pins = "gpio115", "gpio116",
+ "gpio117", "gpio118";
+ drive-strength = <6>;
+ bias-disable;
+ };
+ };
+
+ qup_spi3_default: qup-spi3-default {
+ mux {
+ pins = "gpio119", "gpio120",
+ "gpio121", "gpio122";
+ function = "qup3";
+ };
+
+ config {
+ pins = "gpio119", "gpio120",
+ "gpio121", "gpio122";
+ drive-strength = <6>;
+ bias-disable;
+ };
+ };
+
+ qup_spi4_default: qup-spi4-default {
+ mux {
+ pins = "gpio8", "gpio9",
+ "gpio10", "gpio11";
+ function = "qup4";
+ };
+
+ config {
+ pins = "gpio8", "gpio9",
+ "gpio10", "gpio11";
+ drive-strength = <6>;
+ bias-disable;
+ };
+ };
+
+ qup_spi5_default: qup-spi5-default {
+ mux {
+ pins = "gpio12", "gpio13",
+ "gpio14", "gpio15";
+ function = "qup5";
+ };
+
+ config {
+ pins = "gpio12", "gpio13",
+ "gpio14", "gpio15";
+ drive-strength = <6>;
+ bias-disable;
+ };
+ };
+
+ qup_spi6_default: qup-spi6-default {
+ mux {
+ pins = "gpio16", "gpio17",
+ "gpio18", "gpio19";
+ function = "qup6";
+ };
+
+ config {
+ pins = "gpio16", "gpio17",
+ "gpio18", "gpio19";
+ drive-strength = <6>;
+ bias-disable;
+ };
+ };
+
+ qup_spi7_default: qup-spi7-default {
+ mux {
+ pins = "gpio20", "gpio21",
+ "gpio22", "gpio23";
+ function = "qup7";
+ };
+
+ config {
+ pins = "gpio20", "gpio21",
+ "gpio22", "gpio23";
+ drive-strength = <6>;
+ bias-disable;
+ };
+ };
+
+ qup_spi8_default: qup-spi8-default {
+ mux {
+ pins = "gpio24", "gpio25",
+ "gpio26", "gpio27";
+ function = "qup8";
+ };
+
+ config {
+ pins = "gpio24", "gpio25",
+ "gpio26", "gpio27";
+ drive-strength = <6>;
+ bias-disable;
+ };
+ };
+
+ qup_spi9_default: qup-spi9-default {
+ mux {
+ pins = "gpio125", "gpio126",
+ "gpio127", "gpio128";
+ function = "qup9";
+ };
+
+ config {
+ pins = "gpio125", "gpio126",
+ "gpio127", "gpio128";
+ drive-strength = <6>;
+ bias-disable;
+ };
+ };
+
+ qup_spi10_default: qup-spi10-default {
+ mux {
+ pins = "gpio129", "gpio130",
+ "gpio131", "gpio132";
+ function = "qup10";
+ };
+
+ config {
+ pins = "gpio129", "gpio130",
+ "gpio131", "gpio132";
+ drive-strength = <6>;
+ bias-disable;
+ };
+ };
+
+ qup_spi11_default: qup-spi11-default {
+ mux {
+ pins = "gpio60", "gpio61",
+ "gpio62", "gpio63";
+ function = "qup11";
+ };
+
+ config {
+ pins = "gpio60", "gpio61",
+ "gpio62", "gpio63";
+ drive-strength = <6>;
+ bias-disable;
+ };
+ };
+
+ qup_spi12_default: qup-spi12-default {
+ mux {
+ pins = "gpio32", "gpio33",
+ "gpio34", "gpio35";
+ function = "qup12";
+ };
+
+ config {
+ pins = "gpio32", "gpio33",
+ "gpio34", "gpio35";
+ drive-strength = <6>;
+ bias-disable;
+ };
+ };
+
+ qup_spi13_default: qup-spi13-default {
+ mux {
+ pins = "gpio36", "gpio37",
+ "gpio38", "gpio39";
+ function = "qup13";
+ };
+
+ config {
+ pins = "gpio36", "gpio37",
+ "gpio38", "gpio39";
+ drive-strength = <6>;
+ bias-disable;
+ };
+ };
+
+ qup_spi14_default: qup-spi14-default {
+ mux {
+ pins = "gpio40", "gpio41",
+ "gpio42", "gpio43";
+ function = "qup14";
+ };
+
+ config {
+ pins = "gpio40", "gpio41",
+ "gpio42", "gpio43";
+ drive-strength = <6>;
+ bias-disable;
+ };
+ };
+
+ qup_spi15_default: qup-spi15-default {
+ mux {
+ pins = "gpio44", "gpio45",
+ "gpio46", "gpio47";
+ function = "qup15";
+ };
+
+ config {
+ pins = "gpio44", "gpio45",
+ "gpio46", "gpio47";
+ drive-strength = <6>;
+ bias-disable;
+ };
+ };
+
+ qup_spi16_default: qup-spi16-default {
+ mux {
+ pins = "gpio48", "gpio49",
+ "gpio50", "gpio51";
+ function = "qup16";
+ };
+
+ config {
+ pins = "gpio48", "gpio49",
+ "gpio50", "gpio51";
+ drive-strength = <6>;
+ bias-disable;
+ };
+ };
+
+ qup_spi17_default: qup-spi17-default {
+ mux {
+ pins = "gpio52", "gpio53",
+ "gpio54", "gpio55";
+ function = "qup17";
+ };
+
+ config {
+ pins = "gpio52", "gpio53",
+ "gpio54", "gpio55";
+ drive-strength = <6>;
+ bias-disable;
+ };
+ };
+
+ qup_spi18_default: qup-spi18-default {
+ mux {
+ pins = "gpio56", "gpio57",
+ "gpio58", "gpio59";
+ function = "qup18";
+ };
+
+ config {
+ pins = "gpio56", "gpio57",
+ "gpio58", "gpio59";
+ drive-strength = <6>;
+ bias-disable;
+ };
+ };
+
+ qup_spi19_default: qup-spi19-default {
+ mux {
+ pins = "gpio0", "gpio1",
+ "gpio2", "gpio3";
+ function = "qup19";
+ };
+
+ config {
+ pins = "gpio0", "gpio1",
+ "gpio2", "gpio3";
+ drive-strength = <6>;
+ bias-disable;
+ };
+ };
};
timer@17c20000 {
--
2.26.2
next reply other threads:[~2020-06-06 13:13 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-06-06 13:13 Dmitry Baryshkov [this message]
2020-06-11 5:13 ` [PATCH] arm64: dts: qcom: sm8250: add I2C and SPI nodes Manivannan Sadhasivam
2020-06-21 7:26 ` Bjorn Andersson
2020-06-21 19:05 ` Dmitry Baryshkov
2020-06-21 19:39 ` Bjorn Andersson
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20200606131300.3874987-1-dmitry.baryshkov@linaro.org \
--to=dmitry.baryshkov@linaro.org \
--cc=agross@kernel.org \
--cc=bjorn.andersson@linaro.org \
--cc=devicetree@vger.kernel.org \
--cc=linaro-kernel@lists.linaro.org \
--cc=linux-arm-msm@vger.kernel.org \
--cc=patches@linaro.org \
--cc=robh+dt@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.