All of lore.kernel.org
 help / color / mirror / Atom feed
From: Frank Lee <frank@allwinnertech.com>
To: robh+dt@kernel.org, mripard@kernel.org, wens@csie.org,
	mturquette@baylibre.com, sboyd@kernel.org,
	srinivas.kandagatla@linaro.org, linus.walleij@linaro.org,
	anarsoul@gmail.com, tiny.windzz@gmail.com, rui.zhang@intel.com,
	daniel.lezcano@linaro.org, amit.kucheria@verdurent.com,
	p.zabel@pengutronix.de, clabbe@baylibre.com, icenowy@aosc.io,
	megous@megous.com, karlp@tweak.net.au, bage@linutronix.de
Cc: devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
	linux-kernel@vger.kernel.org, linux-clk@vger.kernel.org,
	linux-gpio@vger.kernel.org, linux-pm@vger.kernel.org,
	huangshuosheng@allwinnertech.com, liyong@allwinnertech.com,
	Frank Lee <frank@allwinnertech.com>
Subject: [PATCH v2 09/11] arm64: allwinner: A100: add the basical Allwinner A100 DTSI file
Date: Mon, 22 Jun 2020 10:59:05 +0800	[thread overview]
Message-ID: <20200622025907.32574-10-frank@allwinnertech.com> (raw)
In-Reply-To: <20200622025907.32574-1-frank@allwinnertech.com>

Allwinner A100 is a new SoC with Cortex-A53 cores, this commit adds
the basical DTSI file of it, including the clock, i2c, pins, sid, ths,
and UART support.

Signed-off-by: Frank Lee <frank@allwinnertech.com>
---
 arch/arm64/boot/dts/allwinner/sun50i-a100.dtsi | 337 +++++++++++++++++++++++++
 1 file changed, 337 insertions(+)
 create mode 100644 arch/arm64/boot/dts/allwinner/sun50i-a100.dtsi

diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a100.dtsi b/arch/arm64/boot/dts/allwinner/sun50i-a100.dtsi
new file mode 100644
index 0000000..5133897
--- /dev/null
+++ b/arch/arm64/boot/dts/allwinner/sun50i-a100.dtsi
@@ -0,0 +1,337 @@
+// SPDX-License-Identifier: (GPL-2.0+ or MIT)
+/*
+ * Copyright (c) 2020 Frank Lee <frank@allwinnertech.com>
+ */
+
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/clock/sun50i-a100-ccu.h>
+#include <dt-bindings/clock/sun50i-a100-r-ccu.h>
+#include <dt-bindings/reset/sun50i-a100-ccu.h>
+#include <dt-bindings/reset/sun50i-a100-r-ccu.h>
+
+/ {
+	interrupt-parent = <&gic>;
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu0: cpu@0 {
+			compatible = "arm,armv8";
+			device_type = "cpu";
+			reg = <0x0>;
+			enable-method = "psci";
+		};
+
+		cpu@1 {
+			compatible = "arm,armv8";
+			device_type = "cpu";
+			reg = <0x1>;
+			enable-method = "psci";
+		};
+
+		cpu@2 {
+			compatible = "arm,armv8";
+			device_type = "cpu";
+			reg = <0x2>;
+			enable-method = "psci";
+		};
+
+		cpu@3 {
+			compatible = "arm,armv8";
+			device_type = "cpu";
+			reg = <0x3>;
+			enable-method = "psci";
+		};
+	};
+
+	psci {
+		compatible = "arm,psci-1.0";
+		method = "smc";
+	};
+
+	iosc: internal-osc-clk {
+		compatible = "fixed-clock";
+		clock-frequency = <16000000>;
+		clock-accuracy = <300000000>;
+		clock-output-names = "iosc";
+		#clock-cells = <0>;
+	};
+
+	dcxo24M: dcxo24M_clk {
+		compatible = "fixed-clock";
+		clock-frequency = <24000000>;
+		clock-output-names = "dcxo24M";
+		#clock-cells = <0>;
+	};
+
+	osc32k: osc32k_clk {
+		compatible = "fixed-clock";
+		clock-frequency = <32768>;
+		clock-output-names = "osc32k";
+		#clock-cells = <0>;
+	};
+
+	timer {
+		compatible = "arm,armv8-timer";
+		interrupts = <GIC_PPI 13
+			(GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>,
+			     <GIC_PPI 14
+			(GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>,
+			     <GIC_PPI 11
+			(GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>,
+			     <GIC_PPI 10
+			(GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
+	};
+
+	soc: soc {
+		compatible = "simple-bus";
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		ccu: clock@3001000 {
+			compatible = "allwinner,sun50i-a100-ccu";
+			reg = <0x0 0x03001000 0x0 0x1000>;
+			clocks = <&dcxo24M>, <&osc32k>, <&iosc>;
+			clock-names = "hosc", "losc", "iosc";
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+		};
+
+		gic: interrupt-controller@3021000 {
+			compatible = "arm,gic-400";
+			reg = <0x0 0x03021000 0x0 0x1000>,
+			      <0x0 0x03022000 0x0 0x2000>,
+			      <0x0 0x03024000 0x0 0x2000>,
+			      <0x0 0x03026000 0x0 0x2000>;
+			interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) |
+						 IRQ_TYPE_LEVEL_HIGH)>;
+			interrupt-controller;
+			#interrupt-cells = <3>;
+		};
+
+		sid@3006000 {
+			compatible = "allwinner,sun50i-a100-sid";
+			reg = <0x0 0x03006000 0 0x1000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			ths_calibration: calib@14 {
+				reg = <0x14 8>;
+			};
+		};
+
+		pio: pinctrl@300b000 {
+			compatible = "allwinner,sun50i-a100-pinctrl";
+			reg = <0x0 0x0300b000 0x0 0x400>;
+			interrupts = <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_APB1>, <&dcxo24M>, <&osc32k>;
+			clock-names = "apb", "hosc", "losc";
+			gpio-controller;
+			#gpio-cells = <3>;
+			interrupt-controller;
+			#interrupt-cells = <3>;
+
+			uart0_pb_pins: uart0-pb-pins {
+				pins = "PB9", "PB10";
+				function = "uart0";
+			};
+		};
+
+		uart0: serial@5000000 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0x0 0x05000000 0x0 0x400>;
+			interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			clocks = <&ccu CLK_BUS_UART0>;
+			resets = <&ccu RST_BUS_UART0>;
+			status = "disabled";
+		};
+
+		uart1: serial@5000400 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0x0 0x05000400 0x0 0x400>;
+			interrupts = <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			clocks = <&ccu CLK_BUS_UART1>;
+			resets = <&ccu RST_BUS_UART1>;
+			status = "disabled";
+		};
+
+		uart2: serial@5000800 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0x0 0x05000800 0x0 0x400>;
+			interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			clocks = <&ccu CLK_BUS_UART2>;
+			resets = <&ccu RST_BUS_UART2>;
+			status = "disabled";
+		};
+
+		uart3: serial@5000c00 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0x0 0x05000c00 0x0 0x400>;
+			interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			clocks = <&ccu CLK_BUS_UART3>;
+			resets = <&ccu RST_BUS_UART3>;
+			status = "disabled";
+		};
+
+		uart4: serial@5001000 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0x0 0x05001000 0x0 0x400>;
+			interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			clocks = <&ccu CLK_BUS_UART4>;
+			resets = <&ccu RST_BUS_UART4>;
+			status = "disabled";
+		};
+
+		i2c0: i2c@5002000 {
+			compatible = "allwinner,sun6i-a31-i2c";
+			reg = <0x0 0x05002000 0x0 0x400>;
+			interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_I2C0>;
+			resets = <&ccu RST_BUS_I2C0>;
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		i2c1: i2c@5002400 {
+			compatible = "allwinner,sun6i-a31-i2c";
+			reg = <0x0 0x05002400 0x0 0x400>;
+			interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_I2C1>;
+			resets = <&ccu RST_BUS_I2C1>;
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		i2c2: i2c@5002800 {
+			compatible = "allwinner,sun6i-a31-i2c";
+			reg = <0x0 0x05002800 0x0 0x400>;
+			interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_I2C2>;
+			resets = <&ccu RST_BUS_I2C2>;
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		i2c3: i2c@5002c00 {
+			compatible = "allwinner,sun6i-a31-i2c";
+			reg = <0x0 0x05002c00 0x0 0x400>;
+			interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_I2C3>;
+			resets = <&ccu RST_BUS_I2C3>;
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		ths: thermal-sensor@5070400 {
+			compatible = "allwinner,sun50i-a100-ths";
+			reg = <0x0 0x05070400 0x0 0x100>;
+			interrupts = <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_THS>;
+			clock-names = "bus";
+			resets = <&ccu RST_BUS_THS>;
+			nvmem-cells = <&ths_calibration>;
+			nvmem-cell-names = "calibration";
+			#thermal-sensor-cells = <1>;
+		};
+
+		r_ccu: clock@7010000 {
+			compatible = "allwinner,sun50i-a100-r-ccu";
+			reg = <0x0 0x07010000 0x0 0x300>;
+			clocks = <&dcxo24M>, <&osc32k>, <&iosc>,
+				 <&ccu CLK_PLL_PERIPH0>;
+			clock-names = "hosc", "losc", "iosc", "pll-periph";
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+		};
+
+		r_pio: pinctrl@7022000 {
+			compatible = "allwinner,sun50i-a100-r-pinctrl";
+			reg = <0x0 0x07022000 0x0 0x400>;
+			interrupts = <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&r_ccu CLK_R_APB1>, <&dcxo24M>, <&osc32k>;
+			clock-names = "apb", "hosc", "losc";
+			gpio-controller;
+			#gpio-cells = <3>;
+			interrupt-controller;
+			#interrupt-cells = <3>;
+
+			r_i2c0_pins: r-i2c0-pins {
+				pins = "PL0", "PL1";
+				function = "s_i2c0";
+			};
+
+			r_i2c1_pins: r-i2c1-pins {
+				pins = "PL8", "PL9";
+				function = "s_i2c1";
+			};
+		};
+
+		r_i2c0: i2c@7081400 {
+			compatible = "allwinner,sun6i-a31-i2c";
+			reg = <0x0 0x07081400 0x0 0x400>;
+			interrupts = <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_I2C0>;
+			resets = <&ccu RST_BUS_I2C0>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&r_i2c0_pins>;
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		r_i2c1: i2c@7081800 {
+			compatible = "allwinner,sun6i-a31-i2c";
+			reg = <0x0 0x07081800 0x0 0x400>;
+			interrupts = <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_I2C1>;
+			resets = <&ccu RST_BUS_I2C1>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&r_i2c1_pins>;
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+	};
+
+	thermal-zones {
+		cpu_thermal_zone {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+			thermal-sensors = <&ths 0>;
+		};
+		gpu_thermal_zone{
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+			thermal-sensors = <&ths 1>;
+		};
+		ddr_thermal_zone{
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+			thermal-sensors = <&ths 2>;
+		};
+	};
+};
-- 
1.9.1


  parent reply	other threads:[~2020-06-22  3:00 UTC|newest]

Thread overview: 22+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-06-22  2:58 [PATCH v2 00/11] Allwinner A100 Initial support Frank Lee
2020-06-22  2:58 ` [PATCH v2 01/11] dt-bindings: clk: sunxi-ccu: add compatible string for A100 CCU and R-CCU Frank Lee
2020-06-22  2:58 ` [PATCH v2 02/11] clk: sunxi-ng: add support for the Allwinner A100 CCU Frank Lee
2020-06-29 14:58   ` Maxime Ripard
2020-06-29 14:58     ` Maxime Ripard
2020-06-22  2:58 ` [PATCH v2 03/11] dt-bindings: pinctrl: sunxi: Add A100 pinctrl bindings Frank Lee
2020-06-29 15:01   ` Maxime Ripard
2020-06-29 15:01     ` Maxime Ripard
2020-06-22  2:59 ` [PATCH v2 04/11] pinctrl: sunxi: add support for the Allwinner A100 pin controller Frank Lee
2020-06-22  2:59 ` [PATCH v2 05/11] dt-bindings: nvmem: SID: add binding for A100's SID controller Frank Lee
2020-06-22  2:59 ` [PATCH v2 06/11] nvmem: sunxi-sid: add support " Frank Lee
2020-06-29 15:07   ` Maxime Ripard
2020-06-29 15:07     ` Maxime Ripard
2020-06-22  2:59 ` [PATCH v2 07/11] dt-bindings: thermal: sun8i: Add binding for A100's THS controller Frank Lee
2020-06-22  2:59 ` [PATCH v2 08/11] thermal: sun8i: Add A100's THS controller support Frank Lee
2020-06-29 15:10   ` Maxime Ripard
2020-06-29 15:10     ` Maxime Ripard
2020-06-22  2:59 ` Frank Lee [this message]
2020-06-29 15:21   ` [PATCH v2 09/11] arm64: allwinner: A100: add the basical Allwinner A100 DTSI file Maxime Ripard
2020-06-29 15:21     ` Maxime Ripard
2020-06-22  2:59 ` [PATCH v2 10/11] dt-bindings: arm: sunxi: Add Allwinner A100 Perf1 Board bindings Frank Lee
2020-06-22  2:59 ` [PATCH v2 11/11] arm64: allwinner: A100: add support for Allwinner Perf1 board Frank Lee

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20200622025907.32574-10-frank@allwinnertech.com \
    --to=frank@allwinnertech.com \
    --cc=amit.kucheria@verdurent.com \
    --cc=anarsoul@gmail.com \
    --cc=bage@linutronix.de \
    --cc=clabbe@baylibre.com \
    --cc=daniel.lezcano@linaro.org \
    --cc=devicetree@vger.kernel.org \
    --cc=huangshuosheng@allwinnertech.com \
    --cc=icenowy@aosc.io \
    --cc=karlp@tweak.net.au \
    --cc=linus.walleij@linaro.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-clk@vger.kernel.org \
    --cc=linux-gpio@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-pm@vger.kernel.org \
    --cc=liyong@allwinnertech.com \
    --cc=megous@megous.com \
    --cc=mripard@kernel.org \
    --cc=mturquette@baylibre.com \
    --cc=p.zabel@pengutronix.de \
    --cc=robh+dt@kernel.org \
    --cc=rui.zhang@intel.com \
    --cc=sboyd@kernel.org \
    --cc=srinivas.kandagatla@linaro.org \
    --cc=tiny.windzz@gmail.com \
    --cc=wens@csie.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.