[dpdk-dev] [PATCH 35/70] net/e1000/base: expose more time synchronization registers

[Guinan Sun <guinanx.sun@intel.com>]

Legacy PTP support for i225 device required time synchronization
registers. This patch add wrap to expose these registers to igc core
files.

Signed-off-by: Sasha Neftin <sasha.neftin@intel.com>
Signed-off-by: Guinan Sun <guinanx.sun@intel.com>
---
 drivers/net/e1000/base/e1000_82575.h   |  8 ---
 drivers/net/e1000/base/e1000_defines.h | 69 ++++++++++++++++++++++++++
 drivers/net/e1000/base/e1000_regs.h    | 10 ++++
 3 files changed, 79 insertions(+), 8 deletions(-)

diff --git a/drivers/net/e1000/base/e1000_82575.h b/drivers/net/e1000/base/e1000_82575.h
index fb810a4b3..d8ea3ae1f 100644
--- a/drivers/net/e1000/base/e1000_82575.h
+++ b/drivers/net/e1000/base/e1000_82575.h
@@ -148,14 +148,12 @@ struct e1000_adv_context_desc {
 /* Immediate Interrupt Rx (A.K.A. Low Latency Interrupt) */
 #define E1000_IMIR_PORT_IM_EN	0x00010000  /* TCP port enable */
 #define E1000_IMIR_PORT_BP	0x00020000  /* TCP port check bypass */
-#define E1000_IMIREXT_SIZE_BP	0x00001000  /* Packet size bypass */
 #define E1000_IMIREXT_CTRL_URG	0x00002000  /* Check URG bit in header */
 #define E1000_IMIREXT_CTRL_ACK	0x00004000  /* Check ACK bit in header */
 #define E1000_IMIREXT_CTRL_PSH	0x00008000  /* Check PSH bit in header */
 #define E1000_IMIREXT_CTRL_RST	0x00010000  /* Check RST bit in header */
 #define E1000_IMIREXT_CTRL_SYN	0x00020000  /* Check SYN bit in header */
 #define E1000_IMIREXT_CTRL_FIN	0x00040000  /* Check FIN bit in header */
-#define E1000_IMIREXT_CTRL_BP	0x00080000  /* Bypass check of ctrl bits */
 
 #define E1000_RXDADV_RSSTYPE_MASK	0x0000000F
 #define E1000_RXDADV_RSSTYPE_SHIFT	12
@@ -164,7 +162,6 @@ struct e1000_adv_context_desc {
 #define E1000_RXDADV_SPLITHEADER_EN	0x00001000
 #define E1000_RXDADV_SPH		0x8000
 #define E1000_RXDADV_STAT_TS		0x10000 /* Pkt was time stamped */
-#define E1000_RXDADV_STAT_TSIP		0x08000 /* timestamp in packet */
 #define E1000_RXDADV_ERR_HBO		0x00800000
 
 /* RSS Hash results */
@@ -251,7 +248,6 @@ struct e1000_adv_context_desc {
 /* ETQF register bit definitions */
 #define E1000_ETQF_FILTER_ENABLE	(1 << 26)
 #define E1000_ETQF_IMM_INT		(1 << 29)
-#define E1000_ETQF_1588			(1 << 30)
 
 /*
  * ETQF filter list: one static filter per filter consumer. This is
@@ -263,10 +259,6 @@ struct e1000_adv_context_desc {
  */
 #define E1000_ETQF_FILTER_EAPOL		0
 
-#define E1000_FTQF_VF_BP		0x00008000
-#define E1000_FTQF_1588_TIME_STAMP	0x08000000
-#define E1000_FTQF_MASK			0xF0000000
-#define E1000_FTQF_MASK_PROTO_BP	0x10000000
 #define E1000_FTQF_MASK_SOURCE_ADDR_BP	0x20000000
 #define E1000_FTQF_MASK_DEST_ADDR_BP	0x40000000
 #define E1000_FTQF_MASK_SOURCE_PORT_BP	0x80000000
diff --git a/drivers/net/e1000/base/e1000_defines.h b/drivers/net/e1000/base/e1000_defines.h
index 86790c405..b132d5ee2 100644
--- a/drivers/net/e1000/base/e1000_defines.h
+++ b/drivers/net/e1000/base/e1000_defines.h
@@ -784,6 +784,75 @@
 #define E1000_TIMINCA_INCPERIOD_SHIFT	24
 #define E1000_TIMINCA_INCVALUE_MASK	0x00FFFFFF
 
+/* Time Sync Interrupt Cause/Mask Register Bits */
+#define TSINTR_SYS_WRAP	(1 << 0) /* SYSTIM Wrap around. */
+#define TSINTR_TXTS	(1 << 1) /* Transmit Timestamp. */
+#define TSINTR_TT0	(1 << 3) /* Target Time 0 Trigger. */
+#define TSINTR_TT1	(1 << 4) /* Target Time 1 Trigger. */
+#define TSINTR_AUTT0	(1 << 5) /* Auxiliary Timestamp 0 Taken. */
+#define TSINTR_AUTT1	(1 << 6) /* Auxiliary Timestamp 1 Taken. */
+
+#define TSYNC_INTERRUPTS	TSINTR_TXTS
+
+/* TSAUXC Configuration Bits */
+#define TSAUXC_EN_TT0	(1 << 0)  /* Enable target time 0. */
+#define TSAUXC_EN_TT1	(1 << 1)  /* Enable target time 1. */
+#define TSAUXC_EN_CLK0	(1 << 2)  /* Enable Configurable Frequency Clock 0. */
+#define TSAUXC_ST0	(1 << 4)  /* Start Clock 0 Toggle on Target Time 0. */
+#define TSAUXC_EN_CLK1	(1 << 5)  /* Enable Configurable Frequency Clock 1. */
+#define TSAUXC_ST1	(1 << 7)  /* Start Clock 1 Toggle on Target Time 1. */
+#define TSAUXC_EN_TS0	(1 << 8)  /* Enable hardware timestamp 0. */
+#define TSAUXC_EN_TS1	(1 << 10) /* Enable hardware timestamp 0. */
+
+/* SDP Configuration Bits */
+#define AUX0_SEL_SDP0	(0u << 0)  /* Assign SDP0 to auxiliary time stamp 0. */
+#define AUX0_SEL_SDP1	(1u << 0)  /* Assign SDP1 to auxiliary time stamp 0. */
+#define AUX0_SEL_SDP2	(2u << 0)  /* Assign SDP2 to auxiliary time stamp 0. */
+#define AUX0_SEL_SDP3	(3u << 0)  /* Assign SDP3 to auxiliary time stamp 0. */
+#define AUX0_TS_SDP_EN	(1u << 2)  /* Enable auxiliary time stamp trigger 0. */
+#define AUX1_SEL_SDP0	(0u << 3)  /* Assign SDP0 to auxiliary time stamp 1. */
+#define AUX1_SEL_SDP1	(1u << 3)  /* Assign SDP1 to auxiliary time stamp 1. */
+#define AUX1_SEL_SDP2	(2u << 3)  /* Assign SDP2 to auxiliary time stamp 1. */
+#define AUX1_SEL_SDP3	(3u << 3)  /* Assign SDP3 to auxiliary time stamp 1. */
+#define AUX1_TS_SDP_EN	(1u << 5)  /* Enable auxiliary time stamp trigger 1. */
+#define TS_SDP0_EN	(1u << 8)  /* SDP0 is assigned to Tsync. */
+#define TS_SDP1_EN	(1u << 11) /* SDP1 is assigned to Tsync. */
+#define TS_SDP2_EN	(1u << 14) /* SDP2 is assigned to Tsync. */
+#define TS_SDP3_EN	(1u << 17) /* SDP3 is assigned to Tsync. */
+#define TS_SDP0_SEL_TT0	(0u << 6)  /* Target time 0 is output on SDP0. */
+#define TS_SDP0_SEL_TT1	(1u << 6)  /* Target time 1 is output on SDP0. */
+#define TS_SDP1_SEL_TT0	(0u << 9)  /* Target time 0 is output on SDP1. */
+#define TS_SDP1_SEL_TT1	(1u << 9)  /* Target time 1 is output on SDP1. */
+#define TS_SDP0_SEL_FC0	(2u << 6)  /* Freq clock  0 is output on SDP0. */
+#define TS_SDP0_SEL_FC1	(3u << 6)  /* Freq clock  1 is output on SDP0. */
+#define TS_SDP1_SEL_FC0	(2u << 9)  /* Freq clock  0 is output on SDP1. */
+#define TS_SDP1_SEL_FC1	(3u << 9)  /* Freq clock  1 is output on SDP1. */
+#define TS_SDP2_SEL_TT0	(0u << 12) /* Target time 0 is output on SDP2. */
+#define TS_SDP2_SEL_TT1	(1u << 12) /* Target time 1 is output on SDP2. */
+#define TS_SDP2_SEL_FC0	(2u << 12) /* Freq clock  0 is output on SDP2. */
+#define TS_SDP2_SEL_FC1	(3u << 12) /* Freq clock  1 is output on SDP2. */
+#define TS_SDP3_SEL_TT0	(0u << 15) /* Target time 0 is output on SDP3. */
+#define TS_SDP3_SEL_TT1	(1u << 15) /* Target time 1 is output on SDP3. */
+#define TS_SDP3_SEL_FC0	(2u << 15) /* Freq clock  0 is output on SDP3. */
+#define TS_SDP3_SEL_FC1	(3u << 15) /* Freq clock  1 is output on SDP3. */
+
+#define E1000_CTRL_SDP0_DIR	0x00400000  /* SDP0 Data direction */
+#define E1000_CTRL_SDP1_DIR	0x00800000  /* SDP1 Data direction */
+
+/* Extended Device Control */
+#define E1000_CTRL_EXT_SDP2_DIR	0x00000400 /* SDP2 Data direction */
+
+/* ETQF register bit definitions */
+#define E1000_ETQF_1588			(1 << 30)
+#define E1000_FTQF_VF_BP		0x00008000
+#define E1000_FTQF_1588_TIME_STAMP	0x08000000
+#define E1000_FTQF_MASK			0xF0000000
+#define E1000_FTQF_MASK_PROTO_BP	0x10000000
+/* Immediate Interrupt Rx (A.K.A. Low Latency Interrupt) */
+#define E1000_IMIREXT_CTRL_BP	0x00080000  /* Bypass check of ctrl bits */
+#define E1000_IMIREXT_SIZE_BP	0x00001000  /* Packet size bypass */
+
+#define E1000_RXDADV_STAT_TSIP		0x08000 /* timestamp in packet */
 #define E1000_TSICR_TXTS		0x00000002
 #define E1000_TSIM_TXTS			0x00000002
 /* TUPLE Filtering Configuration */
diff --git a/drivers/net/e1000/base/e1000_regs.h b/drivers/net/e1000/base/e1000_regs.h
index 7a6cb7ce9..2e14ce109 100644
--- a/drivers/net/e1000/base/e1000_regs.h
+++ b/drivers/net/e1000/base/e1000_regs.h
@@ -698,4 +698,14 @@
 
 
 
+/* IEEE 1588 TIMESYNCH */
+#define E1000_TRGTTIML0	0x0B644 /* Target Time Register 0 Low  - RW */
+#define E1000_TRGTTIMH0	0x0B648 /* Target Time Register 0 High - RW */
+#define E1000_TRGTTIML1	0x0B64C /* Target Time Register 1 Low  - RW */
+#define E1000_TRGTTIMH1	0x0B650 /* Target Time Register 1 High - RW */
+#define E1000_FREQOUT0	0x0B654 /* Frequency Out 0 Control Register - RW */
+#define E1000_FREQOUT1	0x0B658 /* Frequency Out 1 Control Register - RW */
+#define E1000_TSSDP	0x0003C  /* Time Sync SDP Configuration Register - RW */
+
+
 #endif
-- 
2.17.1