All of lore.kernel.org
 help / color / mirror / Atom feed
From: "Michael S. Tsirkin" <mst@redhat.com>
To: qemu-devel@nongnu.org
Cc: Peter Maydell <peter.maydell@linaro.org>,
	David Hildenbrand <david@redhat.com>,
	Markus Armbruster <armbru@redhat.com>,
	"Dr. David Alan Gilbert" <dgilbert@redhat.com>,
	Igor Mammedov <imammedo@redhat.com>
Subject: [PULL 20/41] virtio-pci: Send qapi events when the virtio-mem size changes
Date: Fri, 3 Jul 2020 05:04:24 -0400	[thread overview]
Message-ID: <20200703090252.368694-21-mst@redhat.com> (raw)
In-Reply-To: <20200703090252.368694-1-mst@redhat.com>

From: David Hildenbrand <david@redhat.com>

Let's register the notifier and trigger the qapi event with the right
device id.

MEMORY_DEVICE_SIZE_CHANGE is similar to BALLOON_CHANGE, however on a
memory device level.

Don't unregister the notifier (we neither have finalize() nor unrealize()
for VirtIOPCIProxy, so it's not that simple to do it) - both devices are
expected to vanish at the same time.

Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Markus Armbruster <armbru@redhat.com>
Cc: "Dr. David Alan Gilbert" <dgilbert@redhat.com>
Cc: Eric Blake <eblake@redhat.com>
Cc: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20200626072248.78761-18-david@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
---
 qapi/misc.json             | 25 +++++++++++++++++++++++++
 hw/virtio/virtio-mem-pci.h |  1 +
 hw/virtio/virtio-mem-pci.c | 28 ++++++++++++++++++++++++++++
 monitor/monitor.c          |  1 +
 4 files changed, 55 insertions(+)

diff --git a/qapi/misc.json b/qapi/misc.json
index 65ca3edf32..149c925246 100644
--- a/qapi/misc.json
+++ b/qapi/misc.json
@@ -1434,6 +1434,31 @@
 ##
 { 'command': 'query-memory-devices', 'returns': ['MemoryDeviceInfo'] }
 
+##
+# @MEMORY_DEVICE_SIZE_CHANGE:
+#
+# Emitted when the size of a memory device changes. Only emitted for memory
+# devices that can actually change the size (e.g., virtio-mem due to guest
+# action).
+#
+# @id: device's ID
+# @size: the new size of memory that the device provides
+#
+# Note: this event is rate-limited.
+#
+# Since: 5.1
+#
+# Example:
+#
+# <- { "event": "MEMORY_DEVICE_SIZE_CHANGE",
+#      "data": { "id": "vm0", "size": 1073741824},
+#      "timestamp": { "seconds": 1588168529, "microseconds": 201316 } }
+#
+##
+{ 'event': 'MEMORY_DEVICE_SIZE_CHANGE',
+  'data': { '*id': 'str', 'size': 'size' } }
+
+
 ##
 # @MEM_UNPLUG_ERROR:
 #
diff --git a/hw/virtio/virtio-mem-pci.h b/hw/virtio/virtio-mem-pci.h
index 8820cd6628..b51a28b275 100644
--- a/hw/virtio/virtio-mem-pci.h
+++ b/hw/virtio/virtio-mem-pci.h
@@ -28,6 +28,7 @@ typedef struct VirtIOMEMPCI VirtIOMEMPCI;
 struct VirtIOMEMPCI {
     VirtIOPCIProxy parent_obj;
     VirtIOMEM vdev;
+    Notifier size_change_notifier;
 };
 
 #endif /* QEMU_VIRTIO_MEM_PCI_H */
diff --git a/hw/virtio/virtio-mem-pci.c b/hw/virtio/virtio-mem-pci.c
index b325303b32..1a8e854123 100644
--- a/hw/virtio/virtio-mem-pci.c
+++ b/hw/virtio/virtio-mem-pci.c
@@ -14,6 +14,7 @@
 #include "virtio-mem-pci.h"
 #include "hw/mem/memory-device.h"
 #include "qapi/error.h"
+#include "qapi/qapi-events-misc.h"
 
 static void virtio_mem_pci_realize(VirtIOPCIProxy *vpci_dev, Error **errp)
 {
@@ -74,6 +75,21 @@ static void virtio_mem_pci_fill_device_info(const MemoryDeviceState *md,
     info->type = MEMORY_DEVICE_INFO_KIND_VIRTIO_MEM;
 }
 
+static void virtio_mem_pci_size_change_notify(Notifier *notifier, void *data)
+{
+    VirtIOMEMPCI *pci_mem = container_of(notifier, VirtIOMEMPCI,
+                                         size_change_notifier);
+    DeviceState *dev = DEVICE(pci_mem);
+    const uint64_t * const size_p = data;
+    const char *id = NULL;
+
+    if (dev->id) {
+        id = g_strdup(dev->id);
+    }
+
+    qapi_event_send_memory_device_size_change(!!id, id, *size_p);
+}
+
 static void virtio_mem_pci_class_init(ObjectClass *klass, void *data)
 {
     DeviceClass *dc = DEVICE_CLASS(klass);
@@ -98,9 +114,21 @@ static void virtio_mem_pci_class_init(ObjectClass *klass, void *data)
 static void virtio_mem_pci_instance_init(Object *obj)
 {
     VirtIOMEMPCI *dev = VIRTIO_MEM_PCI(obj);
+    VirtIOMEMClass *vmc;
+    VirtIOMEM *vmem;
 
     virtio_instance_init_common(obj, &dev->vdev, sizeof(dev->vdev),
                                 TYPE_VIRTIO_MEM);
+
+    dev->size_change_notifier.notify = virtio_mem_pci_size_change_notify;
+    vmem = VIRTIO_MEM(&dev->vdev);
+    vmc = VIRTIO_MEM_GET_CLASS(vmem);
+    /*
+     * We never remove the notifier again, as we expect both devices to
+     * disappear at the same time.
+     */
+    vmc->add_size_change_notifier(vmem, &dev->size_change_notifier);
+
     object_property_add_alias(obj, VIRTIO_MEM_BLOCK_SIZE_PROP,
                               OBJECT(&dev->vdev), VIRTIO_MEM_BLOCK_SIZE_PROP);
     object_property_add_alias(obj, VIRTIO_MEM_SIZE_PROP, OBJECT(&dev->vdev),
diff --git a/monitor/monitor.c b/monitor/monitor.c
index 125494410a..19dcb8fbe3 100644
--- a/monitor/monitor.c
+++ b/monitor/monitor.c
@@ -235,6 +235,7 @@ static MonitorQAPIEventConf monitor_qapi_event_conf[QAPI_EVENT__MAX] = {
     [QAPI_EVENT_QUORUM_REPORT_BAD] = { 1000 * SCALE_MS },
     [QAPI_EVENT_QUORUM_FAILURE]    = { 1000 * SCALE_MS },
     [QAPI_EVENT_VSERPORT_CHANGE]   = { 1000 * SCALE_MS },
+    [QAPI_EVENT_MEMORY_DEVICE_SIZE_CHANGE] = { 1000 * SCALE_MS },
 };
 
 /*
-- 
MST



  parent reply	other threads:[~2020-07-03  9:12 UTC|newest]

Thread overview: 53+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-07-03  9:03 [PULL 00/41] virtio,acpi: features, fixes, cleanups Michael S. Tsirkin
2020-07-03  9:03 ` [PULL 01/41] tests: disassemble-aml.sh: generate AML in readable format Michael S. Tsirkin
2020-07-03  9:03 ` [PULL 02/41] Revert "tests/migration: Reduce autoconverge initial bandwidth" Michael S. Tsirkin
2020-07-03  9:03 ` [PULL 03/41] virtio-balloon: always indicate S_DONE when migration fails Michael S. Tsirkin
2020-07-03  9:03 ` [PULL 04/41] pc: Support coldplugging of virtio-pmem-pci devices on all buses Michael S. Tsirkin
2020-07-03  9:03 ` [PULL 05/41] exec: Introduce ram_block_discard_(disable|require)() Michael S. Tsirkin
2020-07-03  9:03 ` [PULL 06/41] vfio: Convert to ram_block_discard_disable() Michael S. Tsirkin
2020-07-03  9:03 ` [PULL 07/41] accel/kvm: " Michael S. Tsirkin
2020-07-03  9:03   ` Michael S. Tsirkin
2020-07-03  9:03 ` [PULL 08/41] s390x/pv: " Michael S. Tsirkin
2020-07-03  9:03 ` [PULL 09/41] virtio-balloon: Rip out qemu_balloon_inhibit() Michael S. Tsirkin
2020-07-03  9:03 ` [PULL 10/41] target/i386: sev: Use ram_block_discard_disable() Michael S. Tsirkin
2020-07-03  9:03 ` [PULL 11/41] migration/rdma: " Michael S. Tsirkin
2020-07-03  9:04 ` [PULL 12/41] migration/colo: " Michael S. Tsirkin
2020-07-03  9:04 ` [PULL 13/41] virtio-mem: Paravirtualized memory hot(un)plug Michael S. Tsirkin
2020-07-03  9:18   ` David Hildenbrand
2020-07-03  9:32     ` David Hildenbrand
2020-07-03 10:23     ` Michael S. Tsirkin
2020-07-03 10:24       ` David Hildenbrand
2020-07-03  9:04 ` [PULL 14/41] virtio-pci: Proxy for virtio-mem Michael S. Tsirkin
2020-07-03  9:04 ` [PULL 15/41] MAINTAINERS: Add myself as virtio-mem maintainer Michael S. Tsirkin
2020-07-03  9:04 ` [PULL 16/41] hmp: Handle virtio-mem when printing memory device info Michael S. Tsirkin
2020-07-03  9:04 ` [PULL 17/41] numa: Handle virtio-mem in NUMA stats Michael S. Tsirkin
2020-07-03  9:04 ` [PULL 18/41] pc: Support for virtio-mem-pci Michael S. Tsirkin
2020-07-03  9:04 ` [PULL 19/41] virtio-mem: Allow notifiers for size changes Michael S. Tsirkin
2020-07-03  9:04 ` Michael S. Tsirkin [this message]
2020-07-03  9:04 ` [PULL 21/41] virtio-mem: Migration sanity checks Michael S. Tsirkin
2020-07-03  9:04 ` [PULL 22/41] virtio-mem: Add trace events Michael S. Tsirkin
2020-07-03  9:04 ` [PULL 23/41] virtio-mem: Exclude unplugged memory during migration Michael S. Tsirkin
2020-07-03  9:04 ` [PULL 24/41] numa: Auto-enable NUMA when any memory devices are possible Michael S. Tsirkin
2020-07-03  9:04 ` [PULL 25/41] tests/acpi: remove stale allowed tables Michael S. Tsirkin
2020-07-03  9:04 ` [PULL 26/41] docs: vhost-user: add Virtio status protocol feature Michael S. Tsirkin
2020-07-03  9:04 ` [PULL 27/41] MAINTAINERS: add VT-d entry Michael S. Tsirkin
2020-07-03  9:04 ` [PULL 28/41] net: introduce qemu_get_peer Michael S. Tsirkin
2020-07-03  9:04 ` [PULL 29/41] vhost_net: use the function qemu_get_peer Michael S. Tsirkin
2020-07-03  9:04 ` [PULL 30/41] virtio-bus: introduce queue_enabled method Michael S. Tsirkin
2020-07-03  9:04 ` [PULL 31/41] virtio-pci: implement " Michael S. Tsirkin
2020-07-03  9:04 ` [PULL 32/41] vhost: check the existence of vhost_set_iotlb_callback Michael S. Tsirkin
2020-07-03  9:04 ` [PULL 33/41] vhost: introduce new VhostOps vhost_dev_start Michael S. Tsirkin
2020-07-03  9:05 ` [PULL 34/41] vhost: implement vhost_dev_start method Michael S. Tsirkin
2020-07-03  9:05 ` [PULL 35/41] vhost: introduce new VhostOps vhost_vq_get_addr Michael S. Tsirkin
2020-07-03  9:05 ` [PULL 36/41] vhost: implement vhost_vq_get_addr method Michael S. Tsirkin
2020-07-03  9:05 ` [PULL 37/41] vhost: introduce new VhostOps vhost_force_iommu Michael S. Tsirkin
2020-07-03  9:05 ` [PULL 38/41] vhost: implement vhost_force_iommu method Michael S. Tsirkin
2020-07-03  9:05 ` [PULL 39/41] vhost_net: introduce set_config & get_config Michael S. Tsirkin
2020-07-03  9:05 ` [PULL 40/41] vhost-vdpa: introduce vhost-vdpa backend Michael S. Tsirkin
2020-07-08  0:07   ` Bruce Rogers
2020-07-08  4:17     ` Cindy Lu
2020-07-03  9:05 ` [PULL 41/41] vhost-vdpa: introduce vhost-vdpa net client Michael S. Tsirkin
2020-07-03  9:31 ` [PULL 00/41] virtio,acpi: features, fixes, cleanups no-reply
2020-07-03 11:58 ` Michael S. Tsirkin
2020-07-04 14:05 ` Peter Maydell
2020-07-04 18:36   ` Michael S. Tsirkin

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20200703090252.368694-21-mst@redhat.com \
    --to=mst@redhat.com \
    --cc=armbru@redhat.com \
    --cc=david@redhat.com \
    --cc=dgilbert@redhat.com \
    --cc=imammedo@redhat.com \
    --cc=peter.maydell@linaro.org \
    --cc=qemu-devel@nongnu.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.