All of lore.kernel.org
 help / color / mirror / Atom feed
From: Somnath Kotur <somnath.kotur@broadcom.com>
To: dev@dpdk.org
Cc: ferruh.yigit@intel.com
Subject: [dpdk-dev] [PATCH 19/20] net/bnxt: enable flow ctrl ops for the VF-rep device
Date: Mon,  6 Jul 2020 13:55:01 +0530	[thread overview]
Message-ID: <20200706082502.26935-20-somnath.kotur@broadcom.com> (raw)
In-Reply-To: <20200706082502.26935-1-somnath.kotur@broadcom.com>

Inorder to offload flows on the vfrep device, it must be
populated with rte_flow_ops.

This patch enables the same.

Signed-off-by: Somnath Kotur <somnath.kotur@broadcom.com>
Signed-off-by: Venkat Duvvuru <venkatkumar.duvvuru@broadcom.com>
---
 drivers/net/bnxt/bnxt.h            | 5 +++++
 drivers/net/bnxt/bnxt_ethdev.c     | 9 +++++++--
 drivers/net/bnxt/bnxt_reps.c       | 3 +--
 drivers/net/bnxt/tf_ulp/bnxt_ulp.c | 8 ++++++--
 4 files changed, 19 insertions(+), 6 deletions(-)

diff --git a/drivers/net/bnxt/bnxt.h b/drivers/net/bnxt/bnxt.h
index f16bf33..f69ba24 100644
--- a/drivers/net/bnxt/bnxt.h
+++ b/drivers/net/bnxt/bnxt.h
@@ -897,4 +897,9 @@ void bnxt_flow_cnt_alarm_cb(void *arg);
 int bnxt_flow_stats_req(struct bnxt *bp);
 int bnxt_flow_stats_cnt(struct bnxt *bp);
 uint32_t bnxt_get_speed_capabilities(struct bnxt *bp);
+
+int
+bnxt_filter_ctrl_op(struct rte_eth_dev *dev,
+		    enum rte_filter_type filter_type,
+		    enum rte_filter_op filter_op, void *arg);
 #endif
diff --git a/drivers/net/bnxt/bnxt_ethdev.c b/drivers/net/bnxt/bnxt_ethdev.c
index b21f850..5626ec3 100644
--- a/drivers/net/bnxt/bnxt_ethdev.c
+++ b/drivers/net/bnxt/bnxt_ethdev.c
@@ -3702,7 +3702,7 @@ bnxt_fdir_filter(struct rte_eth_dev *dev,
 	return ret;
 }
 
-static int
+int
 bnxt_filter_ctrl_op(struct rte_eth_dev *dev,
 		    enum rte_filter_type filter_type,
 		    enum rte_filter_op filter_op, void *arg)
@@ -3710,7 +3710,12 @@ bnxt_filter_ctrl_op(struct rte_eth_dev *dev,
 	struct bnxt *bp = dev->data->dev_private;
 	int ret = 0;
 
-	ret = is_bnxt_in_error(dev->data->dev_private);
+	if (BNXT_ETH_DEV_IS_REPRESENTOR(dev)) {
+		struct bnxt_vf_representor *vfr = dev->data->dev_private;
+		bp = vfr->parent_dev->data->dev_private;
+	}
+
+	ret = is_bnxt_in_error(bp);
 	if (ret)
 		return ret;
 
diff --git a/drivers/net/bnxt/bnxt_reps.c b/drivers/net/bnxt/bnxt_reps.c
index a37a061..875e7b0 100644
--- a/drivers/net/bnxt/bnxt_reps.c
+++ b/drivers/net/bnxt/bnxt_reps.c
@@ -29,6 +29,7 @@ static const struct eth_dev_ops bnxt_vf_rep_dev_ops = {
 	.dev_stop = bnxt_vf_rep_dev_stop_op,
 	.stats_get = bnxt_vf_rep_stats_get_op,
 	.stats_reset = bnxt_vf_rep_stats_reset_op,
+	.filter_ctrl = bnxt_filter_ctrl_op
 };
 
 uint16_t
@@ -132,8 +133,6 @@ bnxt_vf_rep_tx_burst(void *tx_queue,
 	pthread_mutex_unlock(&parent->rep_info->vfr_lock);
 
 	return rc;
-
-	return 0;
 }
 
 int bnxt_vf_representor_init(struct rte_eth_dev *eth_dev, void *params)
diff --git a/drivers/net/bnxt/tf_ulp/bnxt_ulp.c b/drivers/net/bnxt/tf_ulp/bnxt_ulp.c
index 469ad36..397d0a9 100644
--- a/drivers/net/bnxt/tf_ulp/bnxt_ulp.c
+++ b/drivers/net/bnxt/tf_ulp/bnxt_ulp.c
@@ -923,9 +923,13 @@ bnxt_ulp_cntxt_ptr2_flow_db_get(struct bnxt_ulp_context	*ulp_ctx)
 struct bnxt_ulp_context	*
 bnxt_ulp_eth_dev_ptr2_cntxt_get(struct rte_eth_dev	*dev)
 {
-	struct bnxt	*bp;
+	struct bnxt *bp = (struct bnxt *)dev->data->dev_private;
+
+	if (BNXT_ETH_DEV_IS_REPRESENTOR(dev)) {
+		struct bnxt_vf_representor *vfr = dev->data->dev_private;
+		bp = vfr->parent_dev->data->dev_private;
+	}
 
-	bp = (struct bnxt *)dev->data->dev_private;
 	if (!bp) {
 		BNXT_TF_DBG(ERR, "Bnxt private data is not initialized\n");
 		return NULL;
-- 
2.7.4


  parent reply	other threads:[~2020-07-06  8:34 UTC|newest]

Thread overview: 21+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-07-06  8:24 [dpdk-dev] [PATCH 00/20] bnxt patches Somnath Kotur
2020-07-06  8:24 ` [dpdk-dev] [PATCH 01/20] net/bnxt: vxlan encap and decap with src property enabled Somnath Kotur
2020-07-06  8:24 ` [dpdk-dev] [PATCH 02/20] net/bnxt: add support vlan header bitmap Somnath Kotur
2020-07-06  8:24 ` [dpdk-dev] [PATCH 03/20] net/bnxt: add support for negative conditional opcodes Somnath Kotur
2020-07-06  8:24 ` [dpdk-dev] [PATCH 04/20] net/bnxt: add validations to dpdk port id and phy port parsing Somnath Kotur
2020-07-06  8:24 ` [dpdk-dev] [PATCH 05/20] net/bnxt: add support for index opcode constant Somnath Kotur
2020-07-06  8:24 ` [dpdk-dev] [PATCH 06/20] net/bnxt: updated hsi_struct_def_dpdk.h Somnath Kotur
2020-07-06  8:24 ` [dpdk-dev] [PATCH 07/20] nxt/bnxt: added HWRM support for global cfg Somnath Kotur
2020-07-06  8:24 ` [dpdk-dev] [PATCH 08/20] net/bnxt: cleanup and refactoring Somnath Kotur
2020-07-06  8:24 ` [dpdk-dev] [PATCH 09/20] net/bnxt: add support for vlan push and vlan pop actions Somnath Kotur
2020-07-06  8:24 ` [dpdk-dev] [PATCH 10/20] net/bnxt: remove vnic and vport act bits from template matching Somnath Kotur
2020-07-06  8:24 ` [dpdk-dev] [PATCH 11/20] net/bnxt: fix vxlan outer ip protocol id encapsulation Somnath Kotur
2020-07-06  8:24 ` [dpdk-dev] [PATCH 12/20] net/bnxt: add number of vlan tags in the computed field list Somnath Kotur
2020-07-06  8:24 ` [dpdk-dev] [PATCH 13/20] net/bnxt: enable support for PF and VF port action items Somnath Kotur
2020-07-06  8:24 ` [dpdk-dev] [PATCH 14/20] net/bnxt: port configuration changes to support full offload Somnath Kotur
2020-07-06  8:24 ` [dpdk-dev] [PATCH 15/20] net/bnxt: add support for conditional opcodes for mapper result table Somnath Kotur
2020-07-06  8:24 ` [dpdk-dev] [PATCH 16/20] net/bnxt: add support for nat rte action items Somnath Kotur
2020-07-06  8:24 ` [dpdk-dev] [PATCH 17/20] net/bnxt: add support for tp src/dst " Somnath Kotur
2020-07-06  8:25 ` [dpdk-dev] [PATCH 18/20] net/bnxt: use VF vnic when port action is for a VF rep port Somnath Kotur
2020-07-06  8:25 ` Somnath Kotur [this message]
2020-07-06  8:25 ` [dpdk-dev] [PATCH 20/20] net/bnxt: use byte/pkt count shift/masks from the device template Somnath Kotur

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20200706082502.26935-20-somnath.kotur@broadcom.com \
    --to=somnath.kotur@broadcom.com \
    --cc=dev@dpdk.org \
    --cc=ferruh.yigit@intel.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.