All of lore.kernel.org
 help / color / mirror / Atom feed
From: Marc Kleine-Budde <mkl@pengutronix.de>
To: Mark Brown <broonie@kernel.org>
Cc: Maxime Ripard <mripard@kernel.org>, Chen-Yu Tsai <wens@csie.org>,
	linux-spi@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
	kernel@pengutronix.de, Marc Kleine-Budde <mkl@pengutronix.de>
Subject: [PATCH v2 07/10] spi: spi-sun6i: sun6i_spi_drain_fifo(): remove not needed length argument
Date: Mon,  6 Jul 2020 16:34:40 +0200	[thread overview]
Message-ID: <20200706143443.9855-8-mkl@pengutronix.de> (raw)
In-Reply-To: <20200706143443.9855-1-mkl@pengutronix.de>

The function sun6i_spi_drain_fifo() is called with a length argument of
"sspi->fifo_depth" and "SUN6I_FIFO_DEPTH".

The driver reads the number of available bytes to read from the FIFO from the
hardware and uses the length argument to limit this value. This is not needed
as the FIFO can contain only the fifo depth number of bytes.

This patch removes the length argument and check.

Acked-by: Maxime Ripard <mripard@kernel.org>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
---
 drivers/spi/spi-sun6i.c | 13 +++++--------
 1 file changed, 5 insertions(+), 8 deletions(-)

diff --git a/drivers/spi/spi-sun6i.c b/drivers/spi/spi-sun6i.c
index 44cd07331627..5849b65c3b1c 100644
--- a/drivers/spi/spi-sun6i.c
+++ b/drivers/spi/spi-sun6i.c
@@ -135,16 +135,13 @@ static inline void sun6i_spi_disable_interrupt(struct sun6i_spi *sspi, u32 mask)
 	sun6i_spi_write(sspi, SUN6I_INT_CTL_REG, reg);
 }
 
-static inline void sun6i_spi_drain_fifo(struct sun6i_spi *sspi, int len)
+static inline void sun6i_spi_drain_fifo(struct sun6i_spi *sspi)
 {
-	u32 cnt;
+	u32 len;
 	u8 byte;
 
 	/* See how much data is available */
-	cnt = sun6i_spi_get_rx_fifo_count(sspi);
-
-	if (len > cnt)
-		len = cnt;
+	len = sun6i_spi_get_rx_fifo_count(sspi);
 
 	while (len--) {
 		byte = readb(sspi->base_addr + SUN6I_RXDATA_REG);
@@ -348,14 +345,14 @@ static irqreturn_t sun6i_spi_handler(int irq, void *dev_id)
 	/* Transfer complete */
 	if (status & SUN6I_INT_CTL_TC) {
 		sun6i_spi_write(sspi, SUN6I_INT_STA_REG, SUN6I_INT_CTL_TC);
-		sun6i_spi_drain_fifo(sspi, sspi->fifo_depth);
+		sun6i_spi_drain_fifo(sspi);
 		complete(&sspi->done);
 		return IRQ_HANDLED;
 	}
 
 	/* Receive FIFO 3/4 full */
 	if (status & SUN6I_INT_CTL_RF_RDY) {
-		sun6i_spi_drain_fifo(sspi, SUN6I_FIFO_DEPTH);
+		sun6i_spi_drain_fifo(sspi);
 		/* Only clear the interrupt _after_ draining the FIFO */
 		sun6i_spi_write(sspi, SUN6I_INT_STA_REG, SUN6I_INT_CTL_RF_RDY);
 		return IRQ_HANDLED;
-- 
2.27.0


WARNING: multiple messages have this Message-ID
From: Marc Kleine-Budde <mkl@pengutronix.de>
To: Mark Brown <broonie@kernel.org>
Cc: Maxime Ripard <mripard@kernel.org>,
	linux-spi@vger.kernel.org, Chen-Yu Tsai <wens@csie.org>,
	Marc Kleine-Budde <mkl@pengutronix.de>,
	kernel@pengutronix.de, linux-arm-kernel@lists.infradead.org
Subject: [PATCH v2 07/10] spi: spi-sun6i: sun6i_spi_drain_fifo(): remove not needed length argument
Date: Mon,  6 Jul 2020 16:34:40 +0200	[thread overview]
Message-ID: <20200706143443.9855-8-mkl@pengutronix.de> (raw)
In-Reply-To: <20200706143443.9855-1-mkl@pengutronix.de>

The function sun6i_spi_drain_fifo() is called with a length argument of
"sspi->fifo_depth" and "SUN6I_FIFO_DEPTH".

The driver reads the number of available bytes to read from the FIFO from the
hardware and uses the length argument to limit this value. This is not needed
as the FIFO can contain only the fifo depth number of bytes.

This patch removes the length argument and check.

Acked-by: Maxime Ripard <mripard@kernel.org>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
---
 drivers/spi/spi-sun6i.c | 13 +++++--------
 1 file changed, 5 insertions(+), 8 deletions(-)

diff --git a/drivers/spi/spi-sun6i.c b/drivers/spi/spi-sun6i.c
index 44cd07331627..5849b65c3b1c 100644
--- a/drivers/spi/spi-sun6i.c
+++ b/drivers/spi/spi-sun6i.c
@@ -135,16 +135,13 @@ static inline void sun6i_spi_disable_interrupt(struct sun6i_spi *sspi, u32 mask)
 	sun6i_spi_write(sspi, SUN6I_INT_CTL_REG, reg);
 }
 
-static inline void sun6i_spi_drain_fifo(struct sun6i_spi *sspi, int len)
+static inline void sun6i_spi_drain_fifo(struct sun6i_spi *sspi)
 {
-	u32 cnt;
+	u32 len;
 	u8 byte;
 
 	/* See how much data is available */
-	cnt = sun6i_spi_get_rx_fifo_count(sspi);
-
-	if (len > cnt)
-		len = cnt;
+	len = sun6i_spi_get_rx_fifo_count(sspi);
 
 	while (len--) {
 		byte = readb(sspi->base_addr + SUN6I_RXDATA_REG);
@@ -348,14 +345,14 @@ static irqreturn_t sun6i_spi_handler(int irq, void *dev_id)
 	/* Transfer complete */
 	if (status & SUN6I_INT_CTL_TC) {
 		sun6i_spi_write(sspi, SUN6I_INT_STA_REG, SUN6I_INT_CTL_TC);
-		sun6i_spi_drain_fifo(sspi, sspi->fifo_depth);
+		sun6i_spi_drain_fifo(sspi);
 		complete(&sspi->done);
 		return IRQ_HANDLED;
 	}
 
 	/* Receive FIFO 3/4 full */
 	if (status & SUN6I_INT_CTL_RF_RDY) {
-		sun6i_spi_drain_fifo(sspi, SUN6I_FIFO_DEPTH);
+		sun6i_spi_drain_fifo(sspi);
 		/* Only clear the interrupt _after_ draining the FIFO */
 		sun6i_spi_write(sspi, SUN6I_INT_STA_REG, SUN6I_INT_CTL_RF_RDY);
 		return IRQ_HANDLED;
-- 
2.27.0


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

  parent reply	other threads:[~2020-07-06 14:34 UTC|newest]

Thread overview: 30+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-07-06 14:34 [PATCH v2 00/10] spi: spi-sun6i: One fix and some improvements Marc Kleine-Budde
2020-07-06 14:34 ` Marc Kleine-Budde
2020-07-06 14:34 ` [PATCH v2 01/10] spi: spi-sun6i: sun6i_spi_transfer_one(): fix setting of clock rate Marc Kleine-Budde
2020-07-06 14:34   ` Marc Kleine-Budde
2020-07-06 14:34 ` [PATCH v2 02/10] spi: spi-sun6i: sun6i_spi_transfer_one(): report effectivly used speed_hz of transfer Marc Kleine-Budde
2020-07-06 14:34   ` Marc Kleine-Budde
2020-07-06 14:34 ` [PATCH v2 03/10] spi: spi-sun6i: sun6i_spi_transfer_one(): remove useless goto Marc Kleine-Budde
2020-07-06 14:34   ` Marc Kleine-Budde
2020-07-06 14:34 ` [PATCH v2 04/10] spi: spi-sun6i: sun6i_spi_transfer_one(): remove not needed masking of transfer length Marc Kleine-Budde
2020-07-06 14:34   ` Marc Kleine-Budde
2020-07-06 14:34 ` [PATCH v2 05/10] spi: spi-sun6i: sun6i_spi_get_tx_fifo_count: Convert manual shift+mask to FIELD_GET() Marc Kleine-Budde
2020-07-06 14:34   ` Marc Kleine-Budde
2020-07-06 14:34 ` [PATCH v2 06/10] spi: spi-sun6i: sun6i_spi_drain_fifo(): introduce sun6i_spi_get_rx_fifo_count() and make use of it Marc Kleine-Budde
2020-07-06 14:34   ` Marc Kleine-Budde
2020-07-06 14:34 ` Marc Kleine-Budde [this message]
2020-07-06 14:34   ` [PATCH v2 07/10] spi: spi-sun6i: sun6i_spi_drain_fifo(): remove not needed length argument Marc Kleine-Budde
2020-07-06 14:34 ` [PATCH v2 08/10] spi: spi-sun6i: sun6i_spi_fill_fifo(): " Marc Kleine-Budde
2020-07-06 14:34   ` Marc Kleine-Budde
2020-07-06 14:34 ` [PATCH v2 09/10] spi: spi-sun6i: sun6i_spi_transfer_one(): collate write to Interrupt Control Register Marc Kleine-Budde
2020-07-06 14:34   ` Marc Kleine-Budde
2020-07-06 14:34 ` [PATCH v2 10/10] spi: spi-sun6i: sun6i_spi_transfer_one(): enable RF_RDY interrupt only if needed Marc Kleine-Budde
2020-07-06 14:34   ` Marc Kleine-Budde
2020-07-06 15:40 ` [PATCH v2 00/10] spi: spi-sun6i: One fix and some improvements Mark Brown
2020-07-06 15:40   ` Mark Brown
2020-07-06 18:52 ` Mark Brown
2020-07-06 18:52   ` Mark Brown
2020-07-06 19:02 ` Mark Brown
2020-07-06 19:02   ` Mark Brown
2020-07-07 14:17 ` Mark Brown
2020-07-07 14:17   ` Mark Brown

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20200706143443.9855-8-mkl@pengutronix.de \
    --to=mkl@pengutronix.de \
    --cc=broonie@kernel.org \
    --cc=kernel@pengutronix.de \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-spi@vger.kernel.org \
    --cc=mripard@kernel.org \
    --cc=wens@csie.org \
    --subject='Re: [PATCH v2 07/10] spi: spi-sun6i: sun6i_spi_drain_fifo(): remove not needed length argument' \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.