All of lore.kernel.org
 help / color / mirror / Atom feed
From: Jakub Kicinski <kuba@kernel.org>
To: davem@davemloft.net
Cc: netdev@vger.kernel.org, saeedm@mellanox.com,
	michael.chan@broadcom.com, edwin.peer@broadcom.com,
	emil.s.tantilov@intel.com, alexander.h.duyck@linux.intel.com,
	jeffrey.t.kirsher@intel.com, tariqt@mellanox.com,
	mkubecek@suse.cz, Jakub Kicinski <kuba@kernel.org>
Subject: [PATCH net-next v2 08/10] ixgbe: convert to new udp_tunnel_nic infra
Date: Wed,  8 Jul 2020 18:18:12 -0700	[thread overview]
Message-ID: <20200709011814.4003186-9-kuba@kernel.org> (raw)
In-Reply-To: <20200709011814.4003186-1-kuba@kernel.org>

Make use of new common udp_tunnel_nic infra. ixgbe supports
IPv4 only, and only single VxLAN and Geneve ports (one each).

v2:
 - split out the RXCSUM feature handling to separate change;
 - declare structs separately;
 - use ti.type instead of assuming table 0 is VxLAN;
 - move setting netdev->udp_tunnel_nic_info to its own switch.

Signed-off-by: Jakub Kicinski <kuba@kernel.org>
---
 drivers/net/ethernet/intel/ixgbe/ixgbe.h      |   3 -
 drivers/net/ethernet/intel/ixgbe/ixgbe_main.c | 180 +++++-------------
 2 files changed, 44 insertions(+), 139 deletions(-)

diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe.h b/drivers/net/ethernet/intel/ixgbe/ixgbe.h
index debbcf216134..1e8a809233a0 100644
--- a/drivers/net/ethernet/intel/ixgbe/ixgbe.h
+++ b/drivers/net/ethernet/intel/ixgbe/ixgbe.h
@@ -588,11 +588,9 @@ struct ixgbe_adapter {
 #define IXGBE_FLAG_FCOE_ENABLED			BIT(21)
 #define IXGBE_FLAG_SRIOV_CAPABLE		BIT(22)
 #define IXGBE_FLAG_SRIOV_ENABLED		BIT(23)
-#define IXGBE_FLAG_VXLAN_OFFLOAD_CAPABLE	BIT(24)
 #define IXGBE_FLAG_RX_HWTSTAMP_ENABLED		BIT(25)
 #define IXGBE_FLAG_RX_HWTSTAMP_IN_REGISTER	BIT(26)
 #define IXGBE_FLAG_DCB_CAPABLE			BIT(27)
-#define IXGBE_FLAG_GENEVE_OFFLOAD_CAPABLE	BIT(28)
 
 	u32 flags2;
 #define IXGBE_FLAG2_RSC_CAPABLE			BIT(0)
@@ -606,7 +604,6 @@ struct ixgbe_adapter {
 #define IXGBE_FLAG2_RSS_FIELD_IPV6_UDP		BIT(9)
 #define IXGBE_FLAG2_PTP_PPS_ENABLED		BIT(10)
 #define IXGBE_FLAG2_PHY_INTERRUPT		BIT(11)
-#define IXGBE_FLAG2_UDP_TUN_REREG_NEEDED	BIT(12)
 #define IXGBE_FLAG2_VLAN_PROMISC		BIT(13)
 #define IXGBE_FLAG2_EEE_CAPABLE			BIT(14)
 #define IXGBE_FLAG2_EEE_ENABLED			BIT(15)
diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c
index acdf525272a3..4d898ff21a46 100644
--- a/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c
+++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c
@@ -4994,24 +4994,41 @@ static void ixgbe_napi_disable_all(struct ixgbe_adapter *adapter)
 		napi_disable(&adapter->q_vector[q_idx]->napi);
 }
 
-static void ixgbe_clear_udp_tunnel_port(struct ixgbe_adapter *adapter, u32 mask)
+static int ixgbe_udp_tunnel_sync(struct net_device *dev, unsigned int table)
 {
+	struct ixgbe_adapter *adapter = netdev_priv(dev);
 	struct ixgbe_hw *hw = &adapter->hw;
-	u32 vxlanctrl;
+	struct udp_tunnel_info ti;
 
-	if (!(adapter->flags & (IXGBE_FLAG_VXLAN_OFFLOAD_CAPABLE |
-				IXGBE_FLAG_GENEVE_OFFLOAD_CAPABLE)))
-		return;
+	udp_tunnel_nic_get_port(dev, table, 0, &ti);
+	if (ti.type == UDP_TUNNEL_TYPE_VXLAN)
+		adapter->vxlan_port = ti.port;
+	else
+		adapter->geneve_port = ti.port;
 
-	vxlanctrl = IXGBE_READ_REG(hw, IXGBE_VXLANCTRL) & ~mask;
-	IXGBE_WRITE_REG(hw, IXGBE_VXLANCTRL, vxlanctrl);
+	IXGBE_WRITE_REG(hw, IXGBE_VXLANCTRL,
+			ntohs(adapter->vxlan_port) |
+			ntohs(adapter->geneve_port) <<
+				IXGBE_VXLANCTRL_GENEVE_UDPPORT_SHIFT);
+	return 0;
+}
 
-	if (mask & IXGBE_VXLANCTRL_VXLAN_UDPPORT_MASK)
-		adapter->vxlan_port = 0;
+static const struct udp_tunnel_nic_info ixgbe_udp_tunnels_x550 = {
+	.sync_table	= ixgbe_udp_tunnel_sync,
+	.flags		= UDP_TUNNEL_NIC_INFO_IPV4_ONLY,
+	.tables		= {
+		{ .n_entries = 1, .tunnel_types = UDP_TUNNEL_TYPE_VXLAN,  },
+	},
+};
 
-	if (mask & IXGBE_VXLANCTRL_GENEVE_UDPPORT_MASK)
-		adapter->geneve_port = 0;
-}
+static const struct udp_tunnel_nic_info ixgbe_udp_tunnels_x550em_a = {
+	.sync_table	= ixgbe_udp_tunnel_sync,
+	.flags		= UDP_TUNNEL_NIC_INFO_IPV4_ONLY,
+	.tables		= {
+		{ .n_entries = 1, .tunnel_types = UDP_TUNNEL_TYPE_VXLAN,  },
+		{ .n_entries = 1, .tunnel_types = UDP_TUNNEL_TYPE_GENEVE, },
+	},
+};
 
 #ifdef CONFIG_IXGBE_DCB
 /**
@@ -6332,7 +6349,6 @@ static int ixgbe_sw_init(struct ixgbe_adapter *adapter,
 			adapter->flags2 |= IXGBE_FLAG2_TEMP_SENSOR_CAPABLE;
 		break;
 	case ixgbe_mac_x550em_a:
-		adapter->flags |= IXGBE_FLAG_GENEVE_OFFLOAD_CAPABLE;
 		switch (hw->device_id) {
 		case IXGBE_DEV_ID_X550EM_A_1G_T:
 		case IXGBE_DEV_ID_X550EM_A_1G_T_L:
@@ -6359,7 +6375,6 @@ static int ixgbe_sw_init(struct ixgbe_adapter *adapter,
 #ifdef CONFIG_IXGBE_DCA
 		adapter->flags &= ~IXGBE_FLAG_DCA_CAPABLE;
 #endif
-		adapter->flags |= IXGBE_FLAG_VXLAN_OFFLOAD_CAPABLE;
 		break;
 	default:
 		break;
@@ -6798,8 +6813,7 @@ int ixgbe_open(struct net_device *netdev)
 
 	ixgbe_up_complete(adapter);
 
-	ixgbe_clear_udp_tunnel_port(adapter, IXGBE_VXLANCTRL_ALL_UDPPORT_MASK);
-	udp_tunnel_get_rx_info(netdev);
+	udp_tunnel_nic_reset_ntf(netdev);
 
 	return 0;
 
@@ -7921,12 +7935,6 @@ static void ixgbe_service_task(struct work_struct *work)
 		ixgbe_service_event_complete(adapter);
 		return;
 	}
-	if (adapter->flags2 & IXGBE_FLAG2_UDP_TUN_REREG_NEEDED) {
-		rtnl_lock();
-		adapter->flags2 &= ~IXGBE_FLAG2_UDP_TUN_REREG_NEEDED;
-		udp_tunnel_get_rx_info(adapter->netdev);
-		rtnl_unlock();
-	}
 	ixgbe_reset_subtask(adapter);
 	ixgbe_phy_interrupt_subtask(adapter);
 	ixgbe_sfp_detection_subtask(adapter);
@@ -9795,118 +9803,6 @@ static int ixgbe_set_features(struct net_device *netdev,
 	return 1;
 }
 
-/**
- * ixgbe_add_udp_tunnel_port - Get notifications about adding UDP tunnel ports
- * @dev: The port's netdev
- * @ti: Tunnel endpoint information
- **/
-static void ixgbe_add_udp_tunnel_port(struct net_device *dev,
-				      struct udp_tunnel_info *ti)
-{
-	struct ixgbe_adapter *adapter = netdev_priv(dev);
-	struct ixgbe_hw *hw = &adapter->hw;
-	__be16 port = ti->port;
-	u32 port_shift = 0;
-	u32 reg;
-
-	if (ti->sa_family != AF_INET)
-		return;
-
-	switch (ti->type) {
-	case UDP_TUNNEL_TYPE_VXLAN:
-		if (!(adapter->flags & IXGBE_FLAG_VXLAN_OFFLOAD_CAPABLE))
-			return;
-
-		if (adapter->vxlan_port == port)
-			return;
-
-		if (adapter->vxlan_port) {
-			netdev_info(dev,
-				    "VXLAN port %d set, not adding port %d\n",
-				    ntohs(adapter->vxlan_port),
-				    ntohs(port));
-			return;
-		}
-
-		adapter->vxlan_port = port;
-		break;
-	case UDP_TUNNEL_TYPE_GENEVE:
-		if (!(adapter->flags & IXGBE_FLAG_GENEVE_OFFLOAD_CAPABLE))
-			return;
-
-		if (adapter->geneve_port == port)
-			return;
-
-		if (adapter->geneve_port) {
-			netdev_info(dev,
-				    "GENEVE port %d set, not adding port %d\n",
-				    ntohs(adapter->geneve_port),
-				    ntohs(port));
-			return;
-		}
-
-		port_shift = IXGBE_VXLANCTRL_GENEVE_UDPPORT_SHIFT;
-		adapter->geneve_port = port;
-		break;
-	default:
-		return;
-	}
-
-	reg = IXGBE_READ_REG(hw, IXGBE_VXLANCTRL) | ntohs(port) << port_shift;
-	IXGBE_WRITE_REG(hw, IXGBE_VXLANCTRL, reg);
-}
-
-/**
- * ixgbe_del_udp_tunnel_port - Get notifications about removing UDP tunnel ports
- * @dev: The port's netdev
- * @ti: Tunnel endpoint information
- **/
-static void ixgbe_del_udp_tunnel_port(struct net_device *dev,
-				      struct udp_tunnel_info *ti)
-{
-	struct ixgbe_adapter *adapter = netdev_priv(dev);
-	u32 port_mask;
-
-	if (ti->type != UDP_TUNNEL_TYPE_VXLAN &&
-	    ti->type != UDP_TUNNEL_TYPE_GENEVE)
-		return;
-
-	if (ti->sa_family != AF_INET)
-		return;
-
-	switch (ti->type) {
-	case UDP_TUNNEL_TYPE_VXLAN:
-		if (!(adapter->flags & IXGBE_FLAG_VXLAN_OFFLOAD_CAPABLE))
-			return;
-
-		if (adapter->vxlan_port != ti->port) {
-			netdev_info(dev, "VXLAN port %d not found\n",
-				    ntohs(ti->port));
-			return;
-		}
-
-		port_mask = IXGBE_VXLANCTRL_VXLAN_UDPPORT_MASK;
-		break;
-	case UDP_TUNNEL_TYPE_GENEVE:
-		if (!(adapter->flags & IXGBE_FLAG_GENEVE_OFFLOAD_CAPABLE))
-			return;
-
-		if (adapter->geneve_port != ti->port) {
-			netdev_info(dev, "GENEVE port %d not found\n",
-				    ntohs(ti->port));
-			return;
-		}
-
-		port_mask = IXGBE_VXLANCTRL_GENEVE_UDPPORT_MASK;
-		break;
-	default:
-		return;
-	}
-
-	ixgbe_clear_udp_tunnel_port(adapter, port_mask);
-	adapter->flags2 |= IXGBE_FLAG2_UDP_TUN_REREG_NEEDED;
-}
-
 static int ixgbe_ndo_fdb_add(struct ndmsg *ndm, struct nlattr *tb[],
 			     struct net_device *dev,
 			     const unsigned char *addr, u16 vid,
@@ -10396,8 +10292,8 @@ static const struct net_device_ops ixgbe_netdev_ops = {
 	.ndo_bridge_getlink	= ixgbe_ndo_bridge_getlink,
 	.ndo_dfwd_add_station	= ixgbe_fwd_add,
 	.ndo_dfwd_del_station	= ixgbe_fwd_del,
-	.ndo_udp_tunnel_add	= ixgbe_add_udp_tunnel_port,
-	.ndo_udp_tunnel_del	= ixgbe_del_udp_tunnel_port,
+	.ndo_udp_tunnel_add	= udp_tunnel_nic_add_port,
+	.ndo_udp_tunnel_del	= udp_tunnel_nic_del_port,
 	.ndo_features_check	= ixgbe_features_check,
 	.ndo_bpf		= ixgbe_xdp,
 	.ndo_xdp_xmit		= ixgbe_xdp_xmit,
@@ -10842,6 +10738,18 @@ static int ixgbe_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
 	if (err)
 		goto err_sw_init;
 
+	switch (adapter->hw.mac.type) {
+	case ixgbe_mac_X550:
+	case ixgbe_mac_X550EM_x:
+		netdev->udp_tunnel_nic_info = &ixgbe_udp_tunnels_x550;
+		break;
+	case ixgbe_mac_x550em_a:
+		netdev->udp_tunnel_nic_info = &ixgbe_udp_tunnels_x550em_a;
+		break;
+	default:
+		break;
+	}
+
 	/* Make sure the SWFW semaphore is in a valid state */
 	if (hw->mac.ops.init_swfw_sync)
 		hw->mac.ops.init_swfw_sync(hw);
-- 
2.26.2


  parent reply	other threads:[~2020-07-09  1:18 UTC|newest]

Thread overview: 23+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-07-09  1:18 [PATCH net-next v2 00/10] udp_tunnel: add NIC RX port offload infrastructure Jakub Kicinski
2020-07-09  1:18 ` [PATCH net-next v2 01/10] debugfs: make sure we can remove u32_array files cleanly Jakub Kicinski
2020-07-09  1:18 ` [PATCH net-next v2 02/10] udp_tunnel: re-number the offload tunnel types Jakub Kicinski
2020-07-09  1:18 ` [PATCH net-next v2 03/10] udp_tunnel: add central NIC RX port offload infrastructure Jakub Kicinski
2020-07-09  1:18 ` [PATCH net-next v2 04/10] ethtool: add tunnel info interface Jakub Kicinski
2020-07-09 14:19   ` kernel test robot
2020-07-09 14:19     ` kernel test robot
2020-07-09  1:18 ` [PATCH net-next v2 05/10] netdevsim: add UDP tunnel port offload support Jakub Kicinski
2020-07-09  1:18 ` [PATCH net-next v2 06/10] selftests: net: add a test for UDP tunnel info infra Jakub Kicinski
2020-07-09  1:18 ` [PATCH net-next v2 07/10] ixgbe: don't clear UDP tunnel ports when RXCSUM is disabled Jakub Kicinski
2020-07-09  1:18 ` Jakub Kicinski [this message]
2020-07-09  1:18 ` [PATCH net-next v2 09/10] bnxt: convert to new udp_tunnel_nic infra Jakub Kicinski
2020-07-09  5:27   ` Michael Chan
2020-07-09 20:56     ` Jakub Kicinski
2020-07-09 21:24       ` Michael Chan
2020-07-09  1:18 ` [PATCH net-next v2 10/10] mlx4: " Jakub Kicinski
2020-07-09 13:58   ` Tariq Toukan
2020-07-09 17:08     ` Tariq Toukan
2020-07-09 20:56       ` Jakub Kicinski
2020-07-09 18:23 ` [PATCH net-next v2 00/10] udp_tunnel: add NIC RX port offload infrastructure David Miller
2020-07-09 20:51   ` Jakub Kicinski
2020-07-10  2:33 ` Tom Herbert
2020-07-10  3:02   ` Jakub Kicinski

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20200709011814.4003186-9-kuba@kernel.org \
    --to=kuba@kernel.org \
    --cc=alexander.h.duyck@linux.intel.com \
    --cc=davem@davemloft.net \
    --cc=edwin.peer@broadcom.com \
    --cc=emil.s.tantilov@intel.com \
    --cc=jeffrey.t.kirsher@intel.com \
    --cc=michael.chan@broadcom.com \
    --cc=mkubecek@suse.cz \
    --cc=netdev@vger.kernel.org \
    --cc=saeedm@mellanox.com \
    --cc=tariqt@mellanox.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.