From mboxrd@z Thu Jan 1 00:00:00 1970 From: Rayagonda Kokatanur Date: Fri, 10 Jul 2020 14:22:16 +0530 Subject: [PATCH v4 11/15] board: ns3: limit U-boot relocation within 16MB memory In-Reply-To: <20200710085220.32730-1-rayagonda.kokatanur@broadcom.com> References: <20200710085220.32730-1-rayagonda.kokatanur@broadcom.com> Message-ID: <20200710085220.32730-12-rayagonda.kokatanur@broadcom.com> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de From: Bharat Kumar Reddy Gooty By default relocation happens to a higher address of DDR, i.e, DDR start + DDR size. U-Boot shall be used to collect the ramdump. Restrict U-Boot to use only the 16MB memory, so that this memory can be reserved. Limit relocation to happen within 16MB memory, start 0xFF00_0000 and end 0x1_0000_0000 Signed-off-by: Bharat Kumar Reddy Gooty Signed-off-by: Rayagonda Kokatanur Reviewed-by: Simon Glass --- Changes from v3: -Address review comments from Simon, Update the commit message. board/broadcom/bcmns3/ns3.c | 22 +++++++++++++++++++--- 1 file changed, 19 insertions(+), 3 deletions(-) diff --git a/board/broadcom/bcmns3/ns3.c b/board/broadcom/bcmns3/ns3.c index 418db67875..33e25376f2 100644 --- a/board/broadcom/bcmns3/ns3.c +++ b/board/broadcom/bcmns3/ns3.c @@ -141,6 +141,11 @@ static int mem_info_parse_fixup(void *fdt) int board_init(void) { + /* Setup memory using "memory" node from DTB */ + if (fdtdec_setup_mem_size_base() != 0) + return -EINVAL; + fdtdec_setup_memory_banksize(); + if (bl33_info->version != BL33_INFO_VERSION) printf("*** warning: ATF BL31 and u-boot not in sync! ***\n"); @@ -154,19 +159,30 @@ int board_late_init(void) int dram_init(void) { - if (fdtdec_setup_mem_size_base() != 0) - return -EINVAL; + /* + * Mark ram base as the last 16MB of 2GB DDR, which is 0xFF00_0000. + * So that relocation happens with in the last 16MB memory. + */ + gd->ram_base = (phys_size_t)(BCM_NS3_MEM_END - SZ_16M); + gd->ram_size = (unsigned long)SZ_16M; return 0; } int dram_init_banksize(void) { - fdtdec_setup_memory_banksize(); + gd->bd->bi_dram[0].start = (BCM_NS3_MEM_END - SZ_16M); + gd->bd->bi_dram[0].size = SZ_16M; return 0; } +/* Limit RAM used by U-Boot to the DDR first bank End region */ +ulong board_get_usable_ram_top(ulong total_size) +{ + return BCM_NS3_MEM_END; +} + void reset_cpu(ulong level) { #define L3_RESET 30 -- 2.17.1