[PATCH AUTOSEL 4.19 001/106] ath9x: Fix stack-out-of-bounds Write in ath9k_hif_usb_rx_cb

[PATCH AUTOSEL 4.19 001/106] ath9x: Fix stack-out-of-bounds Write in ath9k_hif_usb_rx_cb

[Sasha Levin]

From: Qiujun Huang <hqjagain@gmail.com>

[ Upstream commit 19d6c375d671ce9949a864fb9a03e19f5487b4d3 ]

Add barrier to accessing the stack array skb_pool.

The case reported by syzbot:
https://lore.kernel.org/linux-usb/0000000000003d7c1505a2168418@google.com
BUG: KASAN: stack-out-of-bounds in ath9k_hif_usb_rx_stream
drivers/net/wireless/ath/ath9k/hif_usb.c:626 [inline]
BUG: KASAN: stack-out-of-bounds in ath9k_hif_usb_rx_cb+0xdf6/0xf70
drivers/net/wireless/ath/ath9k/hif_usb.c:666
Write of size 8 at addr ffff8881db309a28 by task swapper/1/0

Call Trace:
ath9k_hif_usb_rx_stream drivers/net/wireless/ath/ath9k/hif_usb.c:626
[inline]
ath9k_hif_usb_rx_cb+0xdf6/0xf70
drivers/net/wireless/ath/ath9k/hif_usb.c:666
__usb_hcd_giveback_urb+0x1f2/0x470 drivers/usb/core/hcd.c:1648
usb_hcd_giveback_urb+0x368/0x420 drivers/usb/core/hcd.c:1713
dummy_timer+0x1258/0x32ae drivers/usb/gadget/udc/dummy_hcd.c:1966
call_timer_fn+0x195/0x6f0 kernel/time/timer.c:1404
expire_timers kernel/time/timer.c:1449 [inline]
__run_timers kernel/time/timer.c:1773 [inline]
__run_timers kernel/time/timer.c:1740 [inline]
run_timer_softirq+0x5f9/0x1500 kernel/time/timer.c:1786

Reported-and-tested-by: syzbot+d403396d4df67ad0bd5f@syzkaller.appspotmail.com
Signed-off-by: Qiujun Huang <hqjagain@gmail.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20200404041838.10426-5-hqjagain@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/wireless/ath/ath9k/hif_usb.c | 5 +++++
 1 file changed, 5 insertions(+)

diff --git a/drivers/net/wireless/ath/ath9k/hif_usb.c b/drivers/net/wireless/ath/ath9k/hif_usb.c
index dd0c32379375..c4a2b7201ce3 100644
--- a/drivers/net/wireless/ath/ath9k/hif_usb.c
+++ b/drivers/net/wireless/ath/ath9k/hif_usb.c
@@ -612,6 +612,11 @@ static void ath9k_hif_usb_rx_stream(struct hif_device_usb *hif_dev,
 			hif_dev->remain_skb = nskb;
 			spin_unlock(&hif_dev->rx_lock);
 		} else {
+			if (pool_index == MAX_PKT_NUM_IN_TRANSFER) {
+				dev_err(&hif_dev->udev->dev,
+					"ath9k_htc: over RX MAX_PKT_NUM\n");
+				goto err;
+			}
 			nskb = __dev_alloc_skb(pkt_len + 32, GFP_ATOMIC);
 			if (!nskb) {
 				dev_err(&hif_dev->udev->dev,
-- 
2.25.1

[PATCH AUTOSEL 4.19 002/106] ath9k: Fix use-after-free Write in ath9k_htc_rx_msg

[Sasha Levin]

From: Qiujun Huang <hqjagain@gmail.com>

[ Upstream commit e4ff08a4d727146bb6717a39a8d399d834654345 ]

Write out of slab bounds. We should check epid.

The case reported by syzbot:
https://lore.kernel.org/linux-usb/0000000000006ac55b05a1c05d72@google.com
BUG: KASAN: use-after-free in htc_process_conn_rsp
drivers/net/wireless/ath/ath9k/htc_hst.c:131 [inline]
BUG: KASAN: use-after-free in ath9k_htc_rx_msg+0xa25/0xaf0
drivers/net/wireless/ath/ath9k/htc_hst.c:443
Write of size 2 at addr ffff8881cea291f0 by task swapper/1/0

Call Trace:
 htc_process_conn_rsp drivers/net/wireless/ath/ath9k/htc_hst.c:131
[inline]
ath9k_htc_rx_msg+0xa25/0xaf0
drivers/net/wireless/ath/ath9k/htc_hst.c:443
ath9k_hif_usb_reg_in_cb+0x1ba/0x630
drivers/net/wireless/ath/ath9k/hif_usb.c:718
__usb_hcd_giveback_urb+0x29a/0x550 drivers/usb/core/hcd.c:1650
usb_hcd_giveback_urb+0x368/0x420 drivers/usb/core/hcd.c:1716
dummy_timer+0x1258/0x32ae drivers/usb/gadget/udc/dummy_hcd.c:1966
call_timer_fn+0x195/0x6f0 kernel/time/timer.c:1404
expire_timers kernel/time/timer.c:1449 [inline]
__run_timers kernel/time/timer.c:1773 [inline]
__run_timers kernel/time/timer.c:1740 [inline]
run_timer_softirq+0x5f9/0x1500 kernel/time/timer.c:1786

Reported-and-tested-by: syzbot+b1c61e5f11be5782f192@syzkaller.appspotmail.com
Signed-off-by: Qiujun Huang <hqjagain@gmail.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20200404041838.10426-4-hqjagain@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/wireless/ath/ath9k/htc_hst.c | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/drivers/net/wireless/ath/ath9k/htc_hst.c b/drivers/net/wireless/ath/ath9k/htc_hst.c
index 1bf63a4efb4c..d2e062eaf561 100644
--- a/drivers/net/wireless/ath/ath9k/htc_hst.c
+++ b/drivers/net/wireless/ath/ath9k/htc_hst.c
@@ -113,6 +113,9 @@ static void htc_process_conn_rsp(struct htc_target *target,
 
 	if (svc_rspmsg->status == HTC_SERVICE_SUCCESS) {
 		epid = svc_rspmsg->endpoint_id;
+		if (epid < 0 || epid >= ENDPOINT_MAX)
+			return;
+
 		service_id = be16_to_cpu(svc_rspmsg->service_id);
 		max_msglen = be16_to_cpu(svc_rspmsg->max_msg_len);
 		endpoint = &target->endpoint[epid];
-- 
2.25.1

[PATCH AUTOSEL 4.19 003/106] drm: bridge: adv7511: Extend list of audio sample rates

From: Bogdan Togorean <bogdan.togorean@analog.com>

[ Upstream commit b97b6a1f6e14a25d1e1ca2a46c5fa3e2ca374e22 ]

ADV7511 support sample rates up to 192kHz. CTS and N parameters should
be computed accordingly so this commit extend the list up to maximum
supported sample rate.

Signed-off-by: Bogdan Togorean <bogdan.togorean@analog.com>
Reviewed-by: Andrzej Hajda <a.hajda@samsung.com>
Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200413113513.86091-2-bogdan.togorean@analog.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/bridge/adv7511/adv7511_audio.c | 12 +++++++-----
 1 file changed, 7 insertions(+), 5 deletions(-)

diff --git a/drivers/gpu/drm/bridge/adv7511/adv7511_audio.c b/drivers/gpu/drm/bridge/adv7511/adv7511_audio.c
index 1b4783d45c53..3a218b56a008 100644
--- a/drivers/gpu/drm/bridge/adv7511/adv7511_audio.c
+++ b/drivers/gpu/drm/bridge/adv7511/adv7511_audio.c
@@ -20,13 +20,15 @@ static void adv7511_calc_cts_n(unsigned int f_tmds, unsigned int fs,
 {
 	switch (fs) {
 	case 32000:
-		*n = 4096;
+	case 48000:
+	case 96000:
+	case 192000:
+		*n = fs * 128 / 1000;
 		break;
 	case 44100:
-		*n = 6272;
-		break;
-	case 48000:
-		*n = 6144;
+	case 88200:
+	case 176400:
+		*n = fs * 128 / 900;
 		break;
 	}
 
-- 
2.25.1

[PATCH AUTOSEL 4.19 003/106] drm: bridge: adv7511: Extend list of audio sample rates

[Sasha Levin]

From: Bogdan Togorean <bogdan.togorean@analog.com>

[ Upstream commit b97b6a1f6e14a25d1e1ca2a46c5fa3e2ca374e22 ]

ADV7511 support sample rates up to 192kHz. CTS and N parameters should
be computed accordingly so this commit extend the list up to maximum
supported sample rate.

Signed-off-by: Bogdan Togorean <bogdan.togorean@analog.com>
Reviewed-by: Andrzej Hajda <a.hajda@samsung.com>
Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200413113513.86091-2-bogdan.togorean@analog.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/bridge/adv7511/adv7511_audio.c | 12 +++++++-----
 1 file changed, 7 insertions(+), 5 deletions(-)

diff --git a/drivers/gpu/drm/bridge/adv7511/adv7511_audio.c b/drivers/gpu/drm/bridge/adv7511/adv7511_audio.c
index 1b4783d45c53..3a218b56a008 100644
--- a/drivers/gpu/drm/bridge/adv7511/adv7511_audio.c
+++ b/drivers/gpu/drm/bridge/adv7511/adv7511_audio.c
@@ -20,13 +20,15 @@ static void adv7511_calc_cts_n(unsigned int f_tmds, unsigned int fs,
 {
 	switch (fs) {
 	case 32000:
-		*n = 4096;
+	case 48000:
+	case 96000:
+	case 192000:
+		*n = fs * 128 / 1000;
 		break;
 	case 44100:
-		*n = 6272;
-		break;
-	case 48000:
-		*n = 6144;
+	case 88200:
+	case 176400:
+		*n = fs * 128 / 900;
 		break;
 	}
 
-- 
2.25.1

_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel

[PATCH AUTOSEL 4.19 004/106] crypto: ccp -- don't "select" CONFIG_DMADEVICES

[Sasha Levin]

From: Arnd Bergmann <arnd@arndb.de>

[ Upstream commit eebac678556d6927f09a992872f4464cf3aecc76 ]

DMADEVICES is the top-level option for the slave DMA
subsystem, and should not be selected by device drivers,
as this can cause circular dependencies such as:

drivers/net/ethernet/freescale/Kconfig:6:error: recursive dependency detected!
drivers/net/ethernet/freescale/Kconfig:6:	symbol NET_VENDOR_FREESCALE depends on PPC_BESTCOMM
drivers/dma/bestcomm/Kconfig:6:	symbol PPC_BESTCOMM depends on DMADEVICES
drivers/dma/Kconfig:6:	symbol DMADEVICES is selected by CRYPTO_DEV_SP_CCP
drivers/crypto/ccp/Kconfig:10:	symbol CRYPTO_DEV_SP_CCP depends on CRYPTO
crypto/Kconfig:16:	symbol CRYPTO is selected by LIBCRC32C
lib/Kconfig:222:	symbol LIBCRC32C is selected by LIQUIDIO
drivers/net/ethernet/cavium/Kconfig:65:	symbol LIQUIDIO depends on PTP_1588_CLOCK
drivers/ptp/Kconfig:8:	symbol PTP_1588_CLOCK is implied by FEC
drivers/net/ethernet/freescale/Kconfig:23:	symbol FEC depends on NET_VENDOR_FREESCALE

The LIQUIDIO driver causing this problem is addressed in a
separate patch, but this change is needed to prevent it from
happening again.

Using "depends on DMADEVICES" is what we do for all other
implementations of slave DMA controllers as well.

Fixes: b3c2fee5d66b ("crypto: ccp - Ensure all dependencies are specified")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/crypto/ccp/Kconfig | 3 +--
 1 file changed, 1 insertion(+), 2 deletions(-)

diff --git a/drivers/crypto/ccp/Kconfig b/drivers/crypto/ccp/Kconfig
index b9dfae47aefd..7f5fc705503d 100644
--- a/drivers/crypto/ccp/Kconfig
+++ b/drivers/crypto/ccp/Kconfig
@@ -9,10 +9,9 @@ config CRYPTO_DEV_CCP_DD
 config CRYPTO_DEV_SP_CCP
 	bool "Cryptographic Coprocessor device"
 	default y
-	depends on CRYPTO_DEV_CCP_DD
+	depends on CRYPTO_DEV_CCP_DD && DMADEVICES
 	select HW_RANDOM
 	select DMA_ENGINE
-	select DMADEVICES
 	select CRYPTO_SHA1
 	select CRYPTO_SHA256
 	help
-- 
2.25.1

[PATCH AUTOSEL 4.19 005/106] media: si2157: Better check for running tuner in init

[Sasha Levin]

From: Brad Love <brad@nextdimension.cc>

[ Upstream commit e955f959ac52e145f27ff2be9078b646d0352af0 ]

Getting the Xtal trim property to check if running is less error prone.
Reset if_frequency if state is unknown.

Replaces the previous "garbage check".

Signed-off-by: Brad Love <brad@nextdimension.cc>
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/media/tuners/si2157.c | 15 +++++++--------
 1 file changed, 7 insertions(+), 8 deletions(-)

diff --git a/drivers/media/tuners/si2157.c b/drivers/media/tuners/si2157.c
index a08d8fe2bb1b..13770b038048 100644
--- a/drivers/media/tuners/si2157.c
+++ b/drivers/media/tuners/si2157.c
@@ -84,24 +84,23 @@ static int si2157_init(struct dvb_frontend *fe)
 	struct si2157_cmd cmd;
 	const struct firmware *fw;
 	const char *fw_name;
-	unsigned int uitmp, chip_id;
+	unsigned int chip_id, xtal_trim;
 
 	dev_dbg(&client->dev, "\n");
 
-	/* Returned IF frequency is garbage when firmware is not running */
-	memcpy(cmd.args, "\x15\x00\x06\x07", 4);
+	/* Try to get Xtal trim property, to verify tuner still running */
+	memcpy(cmd.args, "\x15\x00\x04\x02", 4);
 	cmd.wlen = 4;
 	cmd.rlen = 4;
 	ret = si2157_cmd_execute(client, &cmd);
-	if (ret)
-		goto err;
 
-	uitmp = cmd.args[2] << 0 | cmd.args[3] << 8;
-	dev_dbg(&client->dev, "if_frequency kHz=%u\n", uitmp);
+	xtal_trim = cmd.args[2] | (cmd.args[3] << 8);
 
-	if (uitmp == dev->if_frequency / 1000)
+	if (ret == 0 && xtal_trim < 16)
 		goto warm;
 
+	dev->if_frequency = 0; /* we no longer know current tuner state */
+
 	/* power up */
 	if (dev->chiptype == SI2157_CHIPTYPE_SI2146) {
 		memcpy(cmd.args, "\xc0\x05\x01\x00\x00\x0b\x00\x00\x01", 9);
-- 
2.25.1

[PATCH AUTOSEL 4.19 006/106] objtool: Ignore empty alternatives

[Sasha Levin]

From: Julien Thierry <jthierry@redhat.com>

[ Upstream commit 7170cf47d16f1ba29eca07fd818870b7af0a93a5 ]

The .alternatives section can contain entries with no original
instructions. Objtool will currently crash when handling such an entry.

Just skip that entry, but still give a warning to discourage useless
entries.

Signed-off-by: Julien Thierry <jthierry@redhat.com>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Miroslav Benes <mbenes@suse.cz>
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 tools/objtool/check.c | 6 ++++++
 1 file changed, 6 insertions(+)

diff --git a/tools/objtool/check.c b/tools/objtool/check.c
index 4d509734b695..fd3071d83dea 100644
--- a/tools/objtool/check.c
+++ b/tools/objtool/check.c
@@ -801,6 +801,12 @@ static int add_special_section_alts(struct objtool_file *file)
 		}
 
 		if (special_alt->group) {
+			if (!special_alt->orig_len) {
+				WARN_FUNC("empty alternative entry",
+					  orig_insn->sec, orig_insn->offset);
+				continue;
+			}
+
 			ret = handle_group_alt(file, special_alt, orig_insn,
 					       &new_insn);
 			if (ret)
-- 
2.25.1

[PATCH AUTOSEL 4.19 007/106] spi: pxa2xx: Apply CS clk quirk to BXT

[Sasha Levin]

From: Evan Green <evgreen@chromium.org>

[ Upstream commit 6eefaee4f2d366a389da0eb95e524ba82bf358c4 ]

With a couple allies at Intel, and much badgering, I got confirmation
from Intel that at least BXT suffers from the same SPI chip-select
issue as Cannonlake (and beyond). The issue being that after going
through runtime suspend/resume, toggling the chip-select line without
also sending data does nothing.

Add the quirk to BXT to briefly toggle dynamic clock gating off and
on, forcing the fabric to wake up enough to notice the CS register
change.

Signed-off-by: Evan Green <evgreen@chromium.org>
Cc: Shobhit Srivastava <shobhit.srivastava@intel.com>
Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20200427163238.1.Ib1faaabe236e37ea73be9b8dcc6aa034cb3c8804@changeid
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/spi/spi-pxa2xx.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/spi/spi-pxa2xx.c b/drivers/spi/spi-pxa2xx.c
index e4482823d8d7..34662ce04522 100644
--- a/drivers/spi/spi-pxa2xx.c
+++ b/drivers/spi/spi-pxa2xx.c
@@ -156,6 +156,7 @@ static const struct lpss_config lpss_platforms[] = {
 		.tx_threshold_hi = 48,
 		.cs_sel_shift = 8,
 		.cs_sel_mask = 3 << 8,
+		.cs_clk_stays_gated = true,
 	},
 	{	/* LPSS_CNL_SSP */
 		.offset = 0x200,
-- 
2.25.1

[PATCH AUTOSEL 4.19 007/106] spi: pxa2xx: Apply CS clk quirk to BXT

[Sasha Levin]

From: Evan Green <evgreen@chromium.org>

[ Upstream commit 6eefaee4f2d366a389da0eb95e524ba82bf358c4 ]

With a couple allies at Intel, and much badgering, I got confirmation
from Intel that at least BXT suffers from the same SPI chip-select
issue as Cannonlake (and beyond). The issue being that after going
through runtime suspend/resume, toggling the chip-select line without
also sending data does nothing.

Add the quirk to BXT to briefly toggle dynamic clock gating off and
on, forcing the fabric to wake up enough to notice the CS register
change.

Signed-off-by: Evan Green <evgreen@chromium.org>
Cc: Shobhit Srivastava <shobhit.srivastava@intel.com>
Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20200427163238.1.Ib1faaabe236e37ea73be9b8dcc6aa034cb3c8804@changeid
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/spi/spi-pxa2xx.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/spi/spi-pxa2xx.c b/drivers/spi/spi-pxa2xx.c
index e4482823d8d7..34662ce04522 100644
--- a/drivers/spi/spi-pxa2xx.c
+++ b/drivers/spi/spi-pxa2xx.c
@@ -156,6 +156,7 @@ static const struct lpss_config lpss_platforms[] = {
 		.tx_threshold_hi = 48,
 		.cs_sel_shift = 8,
 		.cs_sel_mask = 3 << 8,
+		.cs_clk_stays_gated = true,
 	},
 	{	/* LPSS_CNL_SSP */
 		.offset = 0x200,
-- 
2.25.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH AUTOSEL 4.19 008/106] net: atlantic: make hw_get_regs optional

[Sasha Levin]

From: Mark Starovoytov <mstarovoitov@marvell.com>

[ Upstream commit d0f23741c202c685447050713907f3be39a985ee ]

This patch fixes potential crash in case if hw_get_regs is NULL.

Signed-off-by: Mark Starovoytov <mstarovoitov@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/aquantia/atlantic/aq_nic.c | 6 ++++++
 1 file changed, 6 insertions(+)

diff --git a/drivers/net/ethernet/aquantia/atlantic/aq_nic.c b/drivers/net/ethernet/aquantia/atlantic/aq_nic.c
index 15dcfb6704e5..adac5df0d6b4 100644
--- a/drivers/net/ethernet/aquantia/atlantic/aq_nic.c
+++ b/drivers/net/ethernet/aquantia/atlantic/aq_nic.c
@@ -620,6 +620,9 @@ int aq_nic_get_regs(struct aq_nic_s *self, struct ethtool_regs *regs, void *p)
 	u32 *regs_buff = p;
 	int err = 0;
 
+	if (unlikely(!self->aq_hw_ops->hw_get_regs))
+		return -EOPNOTSUPP;
+
 	regs->version = 1;
 
 	err = self->aq_hw_ops->hw_get_regs(self->aq_hw,
@@ -634,6 +637,9 @@ int aq_nic_get_regs(struct aq_nic_s *self, struct ethtool_regs *regs, void *p)
 
 int aq_nic_get_regs_count(struct aq_nic_s *self)
 {
+	if (unlikely(!self->aq_hw_ops->hw_get_regs))
+		return 0;
+
 	return self->aq_nic_cfg.aq_hw_caps->mac_regs_count;
 }
 
-- 
2.25.1

[PATCH AUTOSEL 4.19 009/106] net: ena: fix error returning in ena_com_get_hash_function()

[Sasha Levin]

From: Arthur Kiyanovski <akiyano@amazon.com>

[ Upstream commit e9a1de378dd46375f9abfd8de1e6f59ee114a793 ]

In case the "func" parameter is NULL we now return "-EINVAL".
This shouldn't happen in general, but when it does happen, this is the
proper way to handle it.

We also check func for NULL in the beginning of the function, as there
is no reason to do all the work and realize in the end of the function
it was useless.

Signed-off-by: Sameeh Jubran <sameehj@amazon.com>
Signed-off-by: Arthur Kiyanovski <akiyano@amazon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/amazon/ena/ena_com.c | 6 ++++--
 1 file changed, 4 insertions(+), 2 deletions(-)

diff --git a/drivers/net/ethernet/amazon/ena/ena_com.c b/drivers/net/ethernet/amazon/ena/ena_com.c
index 3afc0e59a2bd..d07f7f65169a 100644
--- a/drivers/net/ethernet/amazon/ena/ena_com.c
+++ b/drivers/net/ethernet/amazon/ena/ena_com.c
@@ -2137,6 +2137,9 @@ int ena_com_get_hash_function(struct ena_com_dev *ena_dev,
 		rss->hash_key;
 	int rc;
 
+	if (unlikely(!func))
+		return -EINVAL;
+
 	rc = ena_com_get_feature_ex(ena_dev, &get_resp,
 				    ENA_ADMIN_RSS_HASH_FUNCTION,
 				    rss->hash_key_dma_addr,
@@ -2149,8 +2152,7 @@ int ena_com_get_hash_function(struct ena_com_dev *ena_dev,
 	if (rss->hash_func)
 		rss->hash_func--;
 
-	if (func)
-		*func = rss->hash_func;
+	*func = rss->hash_func;
 
 	if (key)
 		memcpy(key, hash_key->key, (size_t)(hash_key->keys_num) << 2);
-- 
2.25.1

[PATCH AUTOSEL 4.19 010/106] efi/libstub/x86: Work around LLVM ELF quirk build regression

[Sasha Levin]

From: Ard Biesheuvel <ardb@kernel.org>

[ Upstream commit f77767ed5f4d398b29119563155e4ece2dfeee13 ]

When building the x86 EFI stub with Clang, the libstub Makefile rules
that manipulate the ELF object files may throw an error like:

    STUBCPY drivers/firmware/efi/libstub/efi-stub-helper.stub.o
  strip: drivers/firmware/efi/libstub/efi-stub-helper.stub.o: Failed to find link section for section 10
  objcopy: drivers/firmware/efi/libstub/efi-stub-helper.stub.o: Failed to find link section for section 10

This is the result of a LLVM feature [0] where symbol references are
stored in a LLVM specific .llvm_addrsig section in a non-transparent way,
causing generic ELF tools such as strip or objcopy to choke on them.

So force the compiler not to emit these sections, by passing the
appropriate command line option.

[0] https://sourceware.org/bugzilla/show_bug.cgi?id=23817

Cc: Nick Desaulniers <ndesaulniers@google.com>
Cc: Peter Collingbourne <pcc@google.com>
Cc: Sami Tolvanen <samitolvanen@google.com>
Reported-by: Arnd Bergmann <arnd@arndb.de>
Suggested-by: Fangrui Song <maskray@google.com>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/firmware/efi/libstub/Makefile | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/firmware/efi/libstub/Makefile b/drivers/firmware/efi/libstub/Makefile
index d9845099635e..d3777d754984 100644
--- a/drivers/firmware/efi/libstub/Makefile
+++ b/drivers/firmware/efi/libstub/Makefile
@@ -28,6 +28,7 @@ KBUILD_CFLAGS			:= $(cflags-y) -DDISABLE_BRANCH_PROFILING \
 				   -D__NO_FORTIFY \
 				   $(call cc-option,-ffreestanding) \
 				   $(call cc-option,-fno-stack-protector) \
+				   $(call cc-option,-fno-addrsig) \
 				   -D__DISABLE_EXPORTS
 
 GCOV_PROFILE			:= n
-- 
2.25.1

[PATCH AUTOSEL 4.19 011/106] arm64: cacheflush: Fix KGDB trap detection

[Sasha Levin]

From: Daniel Thompson <daniel.thompson@linaro.org>

[ Upstream commit ab8ad279ceac4fc78ae4dcf1a26326e05695e537 ]

flush_icache_range() contains a bodge to avoid issuing IPIs when the kgdb
trap handler is running because issuing IPIs is unsafe (and not needed)
in this execution context. However the current test, based on
kgdb_connected is flawed: it both over-matches and under-matches.

The over match occurs because kgdb_connected is set when gdb attaches
to the stub and remains set during normal running. This is relatively
harmelss because in almost all cases irq_disabled() will be false.

The under match is more serious. When kdb is used instead of kgdb to access
the debugger then kgdb_connected is not set in all the places that the
debug core updates sw breakpoints (and hence flushes the icache). This
can lead to deadlock.

Fix by replacing the ad-hoc check with the proper kgdb macro. This also
allows us to drop the #ifdef wrapper.

Fixes: 3b8c9f1cdfc5 ("arm64: IPI each CPU after invalidating the I-cache for kernel mappings")
Signed-off-by: Daniel Thompson <daniel.thompson@linaro.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Link: https://lore.kernel.org/r/20200504170518.2959478-1-daniel.thompson@linaro.org
Signed-off-by: Will Deacon <will@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm64/include/asm/cacheflush.h | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/arch/arm64/include/asm/cacheflush.h b/arch/arm64/include/asm/cacheflush.h
index 19844211a4e6..a449a1c602d3 100644
--- a/arch/arm64/include/asm/cacheflush.h
+++ b/arch/arm64/include/asm/cacheflush.h
@@ -90,7 +90,7 @@ static inline void flush_icache_range(unsigned long start, unsigned long end)
 	 * IPI all online CPUs so that they undergo a context synchronization
 	 * event and are forced to refetch the new instructions.
 	 */
-#ifdef CONFIG_KGDB
+
 	/*
 	 * KGDB performs cache maintenance with interrupts disabled, so we
 	 * will deadlock trying to IPI the secondary CPUs. In theory, we can
@@ -100,9 +100,9 @@ static inline void flush_icache_range(unsigned long start, unsigned long end)
 	 * the patching operation, so we don't need extra IPIs here anyway.
 	 * In which case, add a KGDB-specific bodge and return early.
 	 */
-	if (kgdb_connected && irqs_disabled())
+	if (in_dbg_master())
 		return;
-#endif
+
 	kick_all_cpus_sync();
 }
 
-- 
2.25.1

[PATCH AUTOSEL 4.19 011/106] arm64: cacheflush: Fix KGDB trap detection

[Sasha Levin]

From: Daniel Thompson <daniel.thompson@linaro.org>

[ Upstream commit ab8ad279ceac4fc78ae4dcf1a26326e05695e537 ]

flush_icache_range() contains a bodge to avoid issuing IPIs when the kgdb
trap handler is running because issuing IPIs is unsafe (and not needed)
in this execution context. However the current test, based on
kgdb_connected is flawed: it both over-matches and under-matches.

The over match occurs because kgdb_connected is set when gdb attaches
to the stub and remains set during normal running. This is relatively
harmelss because in almost all cases irq_disabled() will be false.

The under match is more serious. When kdb is used instead of kgdb to access
the debugger then kgdb_connected is not set in all the places that the
debug core updates sw breakpoints (and hence flushes the icache). This
can lead to deadlock.

Fix by replacing the ad-hoc check with the proper kgdb macro. This also
allows us to drop the #ifdef wrapper.

Fixes: 3b8c9f1cdfc5 ("arm64: IPI each CPU after invalidating the I-cache for kernel mappings")
Signed-off-by: Daniel Thompson <daniel.thompson@linaro.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Link: https://lore.kernel.org/r/20200504170518.2959478-1-daniel.thompson@linaro.org
Signed-off-by: Will Deacon <will@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm64/include/asm/cacheflush.h | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/arch/arm64/include/asm/cacheflush.h b/arch/arm64/include/asm/cacheflush.h
index 19844211a4e6..a449a1c602d3 100644
--- a/arch/arm64/include/asm/cacheflush.h
+++ b/arch/arm64/include/asm/cacheflush.h
@@ -90,7 +90,7 @@ static inline void flush_icache_range(unsigned long start, unsigned long end)
 	 * IPI all online CPUs so that they undergo a context synchronization
 	 * event and are forced to refetch the new instructions.
 	 */
-#ifdef CONFIG_KGDB
+
 	/*
 	 * KGDB performs cache maintenance with interrupts disabled, so we
 	 * will deadlock trying to IPI the secondary CPUs. In theory, we can
@@ -100,9 +100,9 @@ static inline void flush_icache_range(unsigned long start, unsigned long end)
 	 * the patching operation, so we don't need extra IPIs here anyway.
 	 * In which case, add a KGDB-specific bodge and return early.
 	 */
-	if (kgdb_connected && irqs_disabled())
+	if (in_dbg_master())
 		return;
-#endif
+
 	kick_all_cpus_sync();
 }
 
-- 
2.25.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH AUTOSEL 4.19 012/106] spi: dw: Zero DMA Tx and Rx configurations on stack

[Sasha Levin]

From: Andy Shevchenko <andriy.shevchenko@linux.intel.com>

[ Upstream commit 3cb97e223d277f84171cc4ccecab31e08b2ee7b5 ]

Some DMA controller drivers do not tolerate non-zero values in
the DMA configuration structures. Zero them to avoid issues with
such DMA controller drivers. Even despite above this is a good
practice per se.

Fixes: 7063c0d942a1 ("spi/dw_spi: add DMA support")
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Feng Tang <feng.tang@intel.com>
Cc: Feng Tang <feng.tang@intel.com>
Link: https://lore.kernel.org/r/20200506153025.21441-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/spi/spi-dw-mid.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/drivers/spi/spi-dw-mid.c b/drivers/spi/spi-dw-mid.c
index 3db905f5f345..f7ec8b98e6db 100644
--- a/drivers/spi/spi-dw-mid.c
+++ b/drivers/spi/spi-dw-mid.c
@@ -155,6 +155,7 @@ static struct dma_async_tx_descriptor *dw_spi_dma_prepare_tx(struct dw_spi *dws,
 	if (!xfer->tx_buf)
 		return NULL;
 
+	memset(&txconf, 0, sizeof(txconf));
 	txconf.direction = DMA_MEM_TO_DEV;
 	txconf.dst_addr = dws->dma_addr;
 	txconf.dst_maxburst = 16;
@@ -201,6 +202,7 @@ static struct dma_async_tx_descriptor *dw_spi_dma_prepare_rx(struct dw_spi *dws,
 	if (!xfer->rx_buf)
 		return NULL;
 
+	memset(&rxconf, 0, sizeof(rxconf));
 	rxconf.direction = DMA_DEV_TO_MEM;
 	rxconf.src_addr = dws->dma_addr;
 	rxconf.src_maxburst = 16;
-- 
2.25.1

[PATCH AUTOSEL 4.19 013/106] x86/cpu/amd: Make erratum #1054 a legacy erratum

[Sasha Levin]

From: Kim Phillips <kim.phillips@amd.com>

[ Upstream commit e2abfc0448a46d8a137505aa180caf14070ec535 ]

Commit

  21b5ee59ef18 ("x86/cpu/amd: Enable the fixed Instructions Retired
		 counter IRPERF")

mistakenly added erratum #1054 as an OS Visible Workaround (OSVW) ID 0.
Erratum #1054 is not OSVW ID 0 [1], so make it a legacy erratum.

There would never have been a false positive on older hardware that
has OSVW bit 0 set, since the IRPERF feature was not available.

However, save a couple of RDMSR executions per thread, on modern
system configurations that correctly set non-zero values in their
OSVW_ID_Length MSRs.

[1] Revision Guide for AMD Family 17h Models 00h-0Fh Processors. The
revision guide is available from the bugzilla link below.

Fixes: 21b5ee59ef18 ("x86/cpu/amd: Enable the fixed Instructions Retired counter IRPERF")
Reported-by: Andrew Cooper <andrew.cooper3@citrix.com>
Signed-off-by: Kim Phillips <kim.phillips@amd.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lkml.kernel.org/r/20200417143356.26054-1-kim.phillips@amd.com
Link: https://bugzilla.kernel.org/show_bug.cgi?id=206537
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/x86/kernel/cpu/amd.c | 3 +--
 1 file changed, 1 insertion(+), 2 deletions(-)

diff --git a/arch/x86/kernel/cpu/amd.c b/arch/x86/kernel/cpu/amd.c
index 120769955687..de69090ca142 100644
--- a/arch/x86/kernel/cpu/amd.c
+++ b/arch/x86/kernel/cpu/amd.c
@@ -1122,8 +1122,7 @@ static const int amd_erratum_383[] =
 
 /* #1054: Instructions Retired Performance Counter May Be Inaccurate */
 static const int amd_erratum_1054[] =
-	AMD_OSVW_ERRATUM(0, AMD_MODEL_RANGE(0x17, 0, 0, 0x2f, 0xf));
-
+	AMD_LEGACY_ERRATUM(AMD_MODEL_RANGE(0x17, 0, 0, 0x2f, 0xf));
 
 static bool cpu_has_amd_erratum(struct cpuinfo_x86 *cpu, const int *erratum)
 {
-- 
2.25.1

[PATCH AUTOSEL 4.19 014/106] arm64: insn: Fix two bugs in encoding 32-bit logical immediates

[Sasha Levin]

From: Luke Nelson <lukenels@cs.washington.edu>

[ Upstream commit 579d1b3faa3735e781ff74aac0afd598515dbc63 ]

This patch fixes two issues present in the current function for encoding
arm64 logical immediates when using the 32-bit variants of instructions.

First, the code does not correctly reject an all-ones 32-bit immediate,
and returns an undefined instruction encoding.

Second, the code incorrectly rejects some 32-bit immediates that are
actually encodable as logical immediates. The root cause is that the code
uses a default mask of 64-bit all-ones, even for 32-bit immediates.
This causes an issue later on when the default mask is used to fill the
top bits of the immediate with ones, shown here:

  /*
   * Pattern: 0..01..10..01..1
   *
   * Fill the unused top bits with ones, and check if
   * the result is a valid immediate (all ones with a
   * contiguous ranges of zeroes).
   */
  imm |= ~mask;
  if (!range_of_ones(~imm))
          return AARCH64_BREAK_FAULT;

To see the problem, consider an immediate of the form 0..01..10..01..1,
where the upper 32 bits are zero, such as 0x80000001. The code checks
if ~(imm | ~mask) contains a range of ones: the incorrect mask yields
1..10..01..10..0, which fails the check; the correct mask yields
0..01..10..0, which succeeds.

The fix for both issues is to generate a correct mask based on the
instruction immediate size, and use the mask to check for all-ones,
all-zeroes, and values wider than the mask.

Currently, arch/arm64/kvm/va_layout.c is the only user of this function,
which uses 64-bit immediates and therefore won't trigger these bugs.

We tested the new code against llvm-mc with all 1,302 encodable 32-bit
logical immediates and all 5,334 encodable 64-bit logical immediates.

Fixes: ef3935eeebff ("arm64: insn: Add encoder for bitwise operations using literals")
Suggested-by: Will Deacon <will@kernel.org>
Co-developed-by: Xi Wang <xi.wang@gmail.com>
Signed-off-by: Xi Wang <xi.wang@gmail.com>
Signed-off-by: Luke Nelson <luke.r.nels@gmail.com>
Reviewed-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20200508181547.24783-2-luke.r.nels@gmail.com
Signed-off-by: Will Deacon <will@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm64/kernel/insn.c | 14 +++++++-------
 1 file changed, 7 insertions(+), 7 deletions(-)

diff --git a/arch/arm64/kernel/insn.c b/arch/arm64/kernel/insn.c
index 3e6229e30109..cd37edbdedcb 100644
--- a/arch/arm64/kernel/insn.c
+++ b/arch/arm64/kernel/insn.c
@@ -1490,16 +1490,10 @@ static u32 aarch64_encode_immediate(u64 imm,
 				    u32 insn)
 {
 	unsigned int immr, imms, n, ones, ror, esz, tmp;
-	u64 mask = ~0UL;
-
-	/* Can't encode full zeroes or full ones */
-	if (!imm || !~imm)
-		return AARCH64_BREAK_FAULT;
+	u64 mask;
 
 	switch (variant) {
 	case AARCH64_INSN_VARIANT_32BIT:
-		if (upper_32_bits(imm))
-			return AARCH64_BREAK_FAULT;
 		esz = 32;
 		break;
 	case AARCH64_INSN_VARIANT_64BIT:
@@ -1511,6 +1505,12 @@ static u32 aarch64_encode_immediate(u64 imm,
 		return AARCH64_BREAK_FAULT;
 	}
 
+	mask = GENMASK(esz - 1, 0);
+
+	/* Can't encode full zeroes, full ones, or value wider than the mask */
+	if (!imm || imm == mask || imm & ~mask)
+		return AARCH64_BREAK_FAULT;
+
 	/*
 	 * Inverse of Replicate(). Try to spot a repeating pattern
 	 * with a pow2 stride.
-- 
2.25.1

[PATCH AUTOSEL 4.19 014/106] arm64: insn: Fix two bugs in encoding 32-bit logical immediates

[Sasha Levin]

From: Luke Nelson <lukenels@cs.washington.edu>

[ Upstream commit 579d1b3faa3735e781ff74aac0afd598515dbc63 ]

This patch fixes two issues present in the current function for encoding
arm64 logical immediates when using the 32-bit variants of instructions.

First, the code does not correctly reject an all-ones 32-bit immediate,
and returns an undefined instruction encoding.

Second, the code incorrectly rejects some 32-bit immediates that are
actually encodable as logical immediates. The root cause is that the code
uses a default mask of 64-bit all-ones, even for 32-bit immediates.
This causes an issue later on when the default mask is used to fill the
top bits of the immediate with ones, shown here:

  /*
   * Pattern: 0..01..10..01..1
   *
   * Fill the unused top bits with ones, and check if
   * the result is a valid immediate (all ones with a
   * contiguous ranges of zeroes).
   */
  imm |= ~mask;
  if (!range_of_ones(~imm))
          return AARCH64_BREAK_FAULT;

To see the problem, consider an immediate of the form 0..01..10..01..1,
where the upper 32 bits are zero, such as 0x80000001. The code checks
if ~(imm | ~mask) contains a range of ones: the incorrect mask yields
1..10..01..10..0, which fails the check; the correct mask yields
0..01..10..0, which succeeds.

The fix for both issues is to generate a correct mask based on the
instruction immediate size, and use the mask to check for all-ones,
all-zeroes, and values wider than the mask.

Currently, arch/arm64/kvm/va_layout.c is the only user of this function,
which uses 64-bit immediates and therefore won't trigger these bugs.

We tested the new code against llvm-mc with all 1,302 encodable 32-bit
logical immediates and all 5,334 encodable 64-bit logical immediates.

Fixes: ef3935eeebff ("arm64: insn: Add encoder for bitwise operations using literals")
Suggested-by: Will Deacon <will@kernel.org>
Co-developed-by: Xi Wang <xi.wang@gmail.com>
Signed-off-by: Xi Wang <xi.wang@gmail.com>
Signed-off-by: Luke Nelson <luke.r.nels@gmail.com>
Reviewed-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20200508181547.24783-2-luke.r.nels@gmail.com
Signed-off-by: Will Deacon <will@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm64/kernel/insn.c | 14 +++++++-------
 1 file changed, 7 insertions(+), 7 deletions(-)

diff --git a/arch/arm64/kernel/insn.c b/arch/arm64/kernel/insn.c
index 3e6229e30109..cd37edbdedcb 100644
--- a/arch/arm64/kernel/insn.c
+++ b/arch/arm64/kernel/insn.c
@@ -1490,16 +1490,10 @@ static u32 aarch64_encode_immediate(u64 imm,
 				    u32 insn)
 {
 	unsigned int immr, imms, n, ones, ror, esz, tmp;
-	u64 mask = ~0UL;
-
-	/* Can't encode full zeroes or full ones */
-	if (!imm || !~imm)
-		return AARCH64_BREAK_FAULT;
+	u64 mask;
 
 	switch (variant) {
 	case AARCH64_INSN_VARIANT_32BIT:
-		if (upper_32_bits(imm))
-			return AARCH64_BREAK_FAULT;
 		esz = 32;
 		break;
 	case AARCH64_INSN_VARIANT_64BIT:
@@ -1511,6 +1505,12 @@ static u32 aarch64_encode_immediate(u64 imm,
 		return AARCH64_BREAK_FAULT;
 	}
 
+	mask = GENMASK(esz - 1, 0);
+
+	/* Can't encode full zeroes, full ones, or value wider than the mask */
+	if (!imm || imm == mask || imm & ~mask)
+		return AARCH64_BREAK_FAULT;
+
 	/*
 	 * Inverse of Replicate(). Try to spot a repeating pattern
 	 * with a pow2 stride.
-- 
2.25.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH AUTOSEL 4.19 015/106] ixgbe: Fix XDP redirect on archs with PAGE_SIZE above 4K

[Sasha Levin]

From: Jesper Dangaard Brouer <brouer@redhat.com>

[ Upstream commit 88eb0ee17b2ece64fcf6689a4557a5c2e7a89c4b ]

The ixgbe driver have another memory model when compiled on archs with
PAGE_SIZE above 4096 bytes. In this mode it doesn't split the page in
two halves, but instead increment rx_buffer->page_offset by truesize of
packet (which include headroom and tailroom for skb_shared_info).

This is done correctly in ixgbe_build_skb(), but in ixgbe_rx_buffer_flip
which is currently only called on XDP_TX and XDP_REDIRECT, it forgets
to add the tailroom for skb_shared_info. This breaks XDP_REDIRECT, for
veth and cpumap.  Fix by adding size of skb_shared_info tailroom.

Maintainers notice: This fix have been queued to Jeff.

Fixes: 6453073987ba ("ixgbe: add initial support for xdp redirect")
Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Cc: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Link: https://lore.kernel.org/bpf/158945344946.97035.17031588499266605743.stgit@firesoul
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/intel/ixgbe/ixgbe_main.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c
index 8177276500f5..7d723b70fcf6 100644
--- a/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c
+++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c
@@ -2258,7 +2258,8 @@ static void ixgbe_rx_buffer_flip(struct ixgbe_ring *rx_ring,
 	rx_buffer->page_offset ^= truesize;
 #else
 	unsigned int truesize = ring_uses_build_skb(rx_ring) ?
-				SKB_DATA_ALIGN(IXGBE_SKB_PAD + size) :
+				SKB_DATA_ALIGN(IXGBE_SKB_PAD + size) +
+				SKB_DATA_ALIGN(sizeof(struct skb_shared_info)) :
 				SKB_DATA_ALIGN(size);
 
 	rx_buffer->page_offset += truesize;
-- 
2.25.1

[Intel-wired-lan] [PATCH AUTOSEL 4.19 015/106] ixgbe: Fix XDP redirect on archs with PAGE_SIZE above 4K

[Sasha Levin]

From: Jesper Dangaard Brouer <brouer@redhat.com>

[ Upstream commit 88eb0ee17b2ece64fcf6689a4557a5c2e7a89c4b ]

The ixgbe driver have another memory model when compiled on archs with
PAGE_SIZE above 4096 bytes. In this mode it doesn't split the page in
two halves, but instead increment rx_buffer->page_offset by truesize of
packet (which include headroom and tailroom for skb_shared_info).

This is done correctly in ixgbe_build_skb(), but in ixgbe_rx_buffer_flip
which is currently only called on XDP_TX and XDP_REDIRECT, it forgets
to add the tailroom for skb_shared_info. This breaks XDP_REDIRECT, for
veth and cpumap.  Fix by adding size of skb_shared_info tailroom.

Maintainers notice: This fix have been queued to Jeff.

Fixes: 6453073987ba ("ixgbe: add initial support for xdp redirect")
Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Cc: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Link: https://lore.kernel.org/bpf/158945344946.97035.17031588499266605743.stgit at firesoul
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/intel/ixgbe/ixgbe_main.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c
index 8177276500f5..7d723b70fcf6 100644
--- a/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c
+++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c
@@ -2258,7 +2258,8 @@ static void ixgbe_rx_buffer_flip(struct ixgbe_ring *rx_ring,
 	rx_buffer->page_offset ^= truesize;
 #else
 	unsigned int truesize = ring_uses_build_skb(rx_ring) ?
-				SKB_DATA_ALIGN(IXGBE_SKB_PAD + size) :
+				SKB_DATA_ALIGN(IXGBE_SKB_PAD + size) +
+				SKB_DATA_ALIGN(sizeof(struct skb_shared_info)) :
 				SKB_DATA_ALIGN(size);
 
 	rx_buffer->page_offset += truesize;
-- 
2.25.1

[PATCH AUTOSEL 4.19 016/106] MIPS: Loongson: Build ATI Radeon GPU driver as module

[Sasha Levin]

From: Tiezhu Yang <yangtiezhu@loongson.cn>

[ Upstream commit a44de7497f91834df0b8b6d459e259788ba66794 ]

When ATI Radeon GPU driver has been compiled directly into the kernel
instead of as a module, we should make sure the firmware for the model
(check available ones in /lib/firmware/radeon) is built-in to the kernel
as well, otherwise there exists the following fatal error during GPU init,
change CONFIG_DRM_RADEON=y to CONFIG_DRM_RADEON=m to fix it.

[    1.900997] [drm] Loading RS780 Microcode
[    1.905077] radeon 0000:01:05.0: Direct firmware load for radeon/RS780_pfp.bin failed with error -2
[    1.914140] r600_cp: Failed to load firmware "radeon/RS780_pfp.bin"
[    1.920405] [drm:r600_init] *ERROR* Failed to load firmware!
[    1.926069] radeon 0000:01:05.0: Fatal error during GPU init
[    1.931729] [drm] radeon: finishing device.

Fixes: 024e6a8b5bb1 ("MIPS: Loongson: Add a Loongson-3 default config file")
Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/mips/configs/loongson3_defconfig | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/mips/configs/loongson3_defconfig b/arch/mips/configs/loongson3_defconfig
index 324dfee23dfb..c871e40b8878 100644
--- a/arch/mips/configs/loongson3_defconfig
+++ b/arch/mips/configs/loongson3_defconfig
@@ -250,7 +250,7 @@ CONFIG_MEDIA_CAMERA_SUPPORT=y
 CONFIG_MEDIA_USB_SUPPORT=y
 CONFIG_USB_VIDEO_CLASS=m
 CONFIG_DRM=y
-CONFIG_DRM_RADEON=y
+CONFIG_DRM_RADEON=m
 CONFIG_FB_RADEON=y
 CONFIG_LCD_CLASS_DEVICE=y
 CONFIG_LCD_PLATFORM=m
-- 
2.25.1

[PATCH AUTOSEL 4.19 017/106] Bluetooth: Add SCO fallback for invalid LMP parameters error

[Sasha Levin]

From: Hsin-Yu Chao <hychao@chromium.org>

[ Upstream commit 56b5453a86203a44726f523b4133c1feca49ce7c ]

Bluetooth PTS test case HFP/AG/ACC/BI-12-I accepts SCO connection
with invalid parameter at the first SCO request expecting AG to
attempt another SCO request with the use of "safe settings" for
given codec, base on section 5.7.1.2 of HFP 1.7 specification.

This patch addresses it by adding "Invalid LMP Parameters" (0x1e)
to the SCO fallback case. Verified with below log:

< HCI Command: Setup Synchronous Connection (0x01|0x0028) plen 17
        Handle: 256
        Transmit bandwidth: 8000
        Receive bandwidth: 8000
        Max latency: 13
        Setting: 0x0003
          Input Coding: Linear
          Input Data Format: 1's complement
          Input Sample Size: 8-bit
          # of bits padding at MSB: 0
          Air Coding Format: Transparent Data
        Retransmission effort: Optimize for link quality (0x02)
        Packet type: 0x0380
          3-EV3 may not be used
          2-EV5 may not be used
          3-EV5 may not be used
> HCI Event: Command Status (0x0f) plen 4
      Setup Synchronous Connection (0x01|0x0028) ncmd 1
        Status: Success (0x00)
> HCI Event: Number of Completed Packets (0x13) plen 5
        Num handles: 1
        Handle: 256
        Count: 1
> HCI Event: Max Slots Change (0x1b) plen 3
        Handle: 256
        Max slots: 1
> HCI Event: Synchronous Connect Complete (0x2c) plen 17
        Status: Invalid LMP Parameters / Invalid LL Parameters (0x1e)
        Handle: 0
        Address: 00:1B:DC:F2:21:59 (OUI 00-1B-DC)
        Link type: eSCO (0x02)
        Transmission interval: 0x00
        Retransmission window: 0x02
        RX packet length: 0
        TX packet length: 0
        Air mode: Transparent (0x03)
< HCI Command: Setup Synchronous Connection (0x01|0x0028) plen 17
        Handle: 256
        Transmit bandwidth: 8000
        Receive bandwidth: 8000
        Max latency: 8
        Setting: 0x0003
          Input Coding: Linear
          Input Data Format: 1's complement
          Input Sample Size: 8-bit
          # of bits padding at MSB: 0
          Air Coding Format: Transparent Data
        Retransmission effort: Optimize for link quality (0x02)
        Packet type: 0x03c8
          EV3 may be used
          2-EV3 may not be used
          3-EV3 may not be used
          2-EV5 may not be used
          3-EV5 may not be used
> HCI Event: Command Status (0x0f) plen 4
      Setup Synchronous Connection (0x01|0x0028) ncmd 1
        Status: Success (0x00)
> HCI Event: Max Slots Change (0x1b) plen 3
        Handle: 256
        Max slots: 5
> HCI Event: Max Slots Change (0x1b) plen 3
        Handle: 256
        Max slots: 1
> HCI Event: Synchronous Connect Complete (0x2c) plen 17
        Status: Success (0x00)
        Handle: 257
        Address: 00:1B:DC:F2:21:59 (OUI 00-1B-DC)
        Link type: eSCO (0x02)
        Transmission interval: 0x06
        Retransmission window: 0x04
        RX packet length: 30
        TX packet length: 30
        Air mode: Transparent (0x03)

Signed-off-by: Hsin-Yu Chao <hychao@chromium.org>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/bluetooth/hci_event.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/net/bluetooth/hci_event.c b/net/bluetooth/hci_event.c
index 3e7badb3ac2d..a044e6bb12b8 100644
--- a/net/bluetooth/hci_event.c
+++ b/net/bluetooth/hci_event.c
@@ -4097,6 +4097,7 @@ static void hci_sync_conn_complete_evt(struct hci_dev *hdev,
 	case 0x11:	/* Unsupported Feature or Parameter Value */
 	case 0x1c:	/* SCO interval rejected */
 	case 0x1a:	/* Unsupported Remote Feature */
+	case 0x1e:	/* Invalid LMP Parameters */
 	case 0x1f:	/* Unspecified error */
 	case 0x20:	/* Unsupported LMP Parameter value */
 		if (conn->out) {
-- 
2.25.1

[PATCH AUTOSEL 4.19 018/106] kgdb: Disable WARN_CONSOLE_UNLOCKED for all kgdb

[Sasha Levin]

From: Douglas Anderson <dianders@chromium.org>

[ Upstream commit 202164fbfa2b2ffa3e66b504e0f126ba9a745006 ]

In commit 81eaadcae81b ("kgdboc: disable the console lock when in
kgdb") we avoided the WARN_CONSOLE_UNLOCKED() yell when we were in
kgdboc.  That still works fine, but it turns out that we get a similar
yell when using other I/O drivers.  One example is the "I/O driver"
for the kgdb test suite (kgdbts).  When I enabled that I again got the
same yells.

Even though "kgdbts" doesn't actually interact with the user over the
console, using it still causes kgdb to print to the consoles.  That
trips the same warning:
  con_is_visible+0x60/0x68
  con_scroll+0x110/0x1b8
  lf+0x4c/0xc8
  vt_console_print+0x1b8/0x348
  vkdb_printf+0x320/0x89c
  kdb_printf+0x68/0x90
  kdb_main_loop+0x190/0x860
  kdb_stub+0x2cc/0x3ec
  kgdb_cpu_enter+0x268/0x744
  kgdb_handle_exception+0x1a4/0x200
  kgdb_compiled_brk_fn+0x34/0x44
  brk_handler+0x7c/0xb8
  do_debug_exception+0x1b4/0x228

Let's increment/decrement the "ignore_console_lock_warning" variable
all the time when we enter the debugger.

This will allow us to later revert commit 81eaadcae81b ("kgdboc:
disable the console lock when in kgdb").

Signed-off-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Reviewed-by: Daniel Thompson <daniel.thompson@linaro.org>
Link: https://lore.kernel.org/r/20200507130644.v4.1.Ied2b058357152ebcc8bf68edd6f20a11d98d7d4e@changeid
Signed-off-by: Daniel Thompson <daniel.thompson@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 kernel/debug/debug_core.c | 4 ++++
 1 file changed, 4 insertions(+)

diff --git a/kernel/debug/debug_core.c b/kernel/debug/debug_core.c
index 94aa9ae0007a..d2799767aab8 100644
--- a/kernel/debug/debug_core.c
+++ b/kernel/debug/debug_core.c
@@ -577,6 +577,8 @@ static int kgdb_cpu_enter(struct kgdb_state *ks, struct pt_regs *regs,
 	if (kgdb_skipexception(ks->ex_vector, ks->linux_regs))
 		goto kgdb_restore;
 
+	atomic_inc(&ignore_console_lock_warning);
+
 	/* Call the I/O driver's pre_exception routine */
 	if (dbg_io_ops->pre_exception)
 		dbg_io_ops->pre_exception();
@@ -649,6 +651,8 @@ static int kgdb_cpu_enter(struct kgdb_state *ks, struct pt_regs *regs,
 	if (dbg_io_ops->post_exception)
 		dbg_io_ops->post_exception();
 
+	atomic_dec(&ignore_console_lock_warning);
+
 	if (!kgdb_single_step) {
 		raw_spin_unlock(&dbg_slave_lock);
 		/* Wait till all the CPUs have quit from the debugger. */
-- 
2.25.1

[PATCH AUTOSEL 4.19 019/106] kgdb: Prevent infinite recursive entries to the debugger

[Sasha Levin]

From: Douglas Anderson <dianders@chromium.org>

[ Upstream commit 3ca676e4ca60d1834bb77535dafe24169cadacef ]

If we detect that we recursively entered the debugger we should hack
our I/O ops to NULL so that the panic() in the next line won't
actually cause another recursion into the debugger.  The first line of
kgdb_panic() will check this and return.

Signed-off-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Daniel Thompson <daniel.thompson@linaro.org>
Link: https://lore.kernel.org/r/20200507130644.v4.6.I89de39f68736c9de610e6f241e68d8dbc44bc266@changeid
Signed-off-by: Daniel Thompson <daniel.thompson@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 kernel/debug/debug_core.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/kernel/debug/debug_core.c b/kernel/debug/debug_core.c
index d2799767aab8..6a1dc2613bb9 100644
--- a/kernel/debug/debug_core.c
+++ b/kernel/debug/debug_core.c
@@ -444,6 +444,7 @@ static int kgdb_reenter_check(struct kgdb_state *ks)
 
 	if (exception_level > 1) {
 		dump_stack();
+		kgdb_io_module_registered = false;
 		panic("Recursive entry to debugger");
 	}
 
-- 
2.25.1

[PATCH AUTOSEL 4.19 020/106] spi: dw: Enable interrupts in accordance with DMA xfer mode

[Sasha Levin]

From: Serge Semin <Sergey.Semin@baikalelectronics.ru>

[ Upstream commit 43dba9f3f98c2b184a19f856f06fe22817bfd9e0 ]

It's pointless to track the Tx overrun interrupts if Rx-only SPI
transfer is issued. Similarly there is no need in handling the Rx
overrun/underrun interrupts if Tx-only SPI transfer is executed.
So lets unmask the interrupts only if corresponding SPI
transactions are implied.

Co-developed-by: Georgy Vlasov <Georgy.Vlasov@baikalelectronics.ru>
Signed-off-by: Georgy Vlasov <Georgy.Vlasov@baikalelectronics.ru>
Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru>
Cc: Ramil Zaripov <Ramil.Zaripov@baikalelectronics.ru>
Cc: Alexey Malahov <Alexey.Malahov@baikalelectronics.ru>
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Cc: Paul Burton <paulburton@kernel.org>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: Rob Herring <robh+dt@kernel.org>
Cc: linux-mips@vger.kernel.org
Cc: devicetree@vger.kernel.org
Link: https://lore.kernel.org/r/20200522000806.7381-3-Sergey.Semin@baikalelectronics.ru
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/spi/spi-dw-mid.c | 12 ++++++++----
 1 file changed, 8 insertions(+), 4 deletions(-)

diff --git a/drivers/spi/spi-dw-mid.c b/drivers/spi/spi-dw-mid.c
index f7ec8b98e6db..e1b34ef9a31c 100644
--- a/drivers/spi/spi-dw-mid.c
+++ b/drivers/spi/spi-dw-mid.c
@@ -228,19 +228,23 @@ static struct dma_async_tx_descriptor *dw_spi_dma_prepare_rx(struct dw_spi *dws,
 
 static int mid_spi_dma_setup(struct dw_spi *dws, struct spi_transfer *xfer)
 {
-	u16 dma_ctrl = 0;
+	u16 imr = 0, dma_ctrl = 0;
 
 	dw_writel(dws, DW_SPI_DMARDLR, 0xf);
 	dw_writel(dws, DW_SPI_DMATDLR, 0x10);
 
-	if (xfer->tx_buf)
+	if (xfer->tx_buf) {
 		dma_ctrl |= SPI_DMA_TDMAE;
-	if (xfer->rx_buf)
+		imr |= SPI_INT_TXOI;
+	}
+	if (xfer->rx_buf) {
 		dma_ctrl |= SPI_DMA_RDMAE;
+		imr |= SPI_INT_RXUI | SPI_INT_RXOI;
+	}
 	dw_writel(dws, DW_SPI_DMACR, dma_ctrl);
 
 	/* Set the interrupt mask */
-	spi_umask_intr(dws, SPI_INT_TXOI | SPI_INT_RXUI | SPI_INT_RXOI);
+	spi_umask_intr(dws, imr);
 
 	dws->transfer_handler = dma_transfer;
 
-- 
2.25.1

[PATCH AUTOSEL 4.19 021/106] clocksource: dw_apb_timer: Make CPU-affiliation being optional

[Sasha Levin]

From: Serge Semin <Sergey.Semin@baikalelectronics.ru>

[ Upstream commit cee43dbf2ee3f430434e2b66994eff8a1aeda889 ]

Currently the DW APB Timer driver binds each clockevent timers to a
particular CPU. This isn't good for multiple reasons. First of all seeing
the device is placed on APB bus (which makes it accessible from any CPU
core), accessible over MMIO and having the DYNIRQ flag set we can be sure
that manually binding the timer to any CPU just isn't correct. By doing
so we just set an extra limitation on device usage. This also doesn't
reflect the device actual capability, since by setting the IRQ affinity
we can make it virtually local to any CPU. Secondly imagine if you had a
real CPU-local timer with the same rating and the same CPU-affinity.
In this case if DW APB timer was registered first, then due to the
clockevent framework tick-timer selection procedure we'll end up with the
real CPU-local timer being left unselected for clock-events tracking. But
on most of the platforms (MIPS/ARM/etc) such timers are normally embedded
into the CPU core and are accessible with much better performance then
devices placed on APB. For instance in MIPS architectures there is
r4k-timer, which is CPU-local, assigned with the same rating, and normally
its clockevent device is registered after the platform-specific one.

So in order to fix all of these issues let's make the DW APB Timer CPU
affinity being optional and deactivated by passing a negative CPU id,
which will effectively set the DW APB clockevent timer cpumask to
'cpu_possible_mask'.

Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru>
Cc: Alexey Malahov <Alexey.Malahov@baikalelectronics.ru>
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Cc: Paul Burton <paulburton@kernel.org>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Alessandro Zummo <a.zummo@towertech.it>
Cc: Alexandre Belloni <alexandre.belloni@bootlin.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Rob Herring <robh+dt@kernel.org>
Cc: linux-mips@vger.kernel.org
Cc: linux-rtc@vger.kernel.org
Cc: devicetree@vger.kernel.org
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://lore.kernel.org/r/20200521204818.25436-5-Sergey.Semin@baikalelectronics.ru
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/clocksource/dw_apb_timer.c | 5 +++--
 1 file changed, 3 insertions(+), 2 deletions(-)

diff --git a/drivers/clocksource/dw_apb_timer.c b/drivers/clocksource/dw_apb_timer.c
index 1f5f734e4919..a018199575e3 100644
--- a/drivers/clocksource/dw_apb_timer.c
+++ b/drivers/clocksource/dw_apb_timer.c
@@ -225,7 +225,8 @@ static int apbt_next_event(unsigned long delta,
 /**
  * dw_apb_clockevent_init() - use an APB timer as a clock_event_device
  *
- * @cpu:	The CPU the events will be targeted at.
+ * @cpu:	The CPU the events will be targeted at or -1 if CPU affiliation
+ *		isn't required.
  * @name:	The name used for the timer and the IRQ for it.
  * @rating:	The rating to give the timer.
  * @base:	I/O base for the timer registers.
@@ -260,7 +261,7 @@ dw_apb_clockevent_init(int cpu, const char *name, unsigned rating,
 	dw_ced->ced.max_delta_ticks = 0x7fffffff;
 	dw_ced->ced.min_delta_ns = clockevent_delta2ns(5000, &dw_ced->ced);
 	dw_ced->ced.min_delta_ticks = 5000;
-	dw_ced->ced.cpumask = cpumask_of(cpu);
+	dw_ced->ced.cpumask = cpu < 0 ? cpu_possible_mask : cpumask_of(cpu);
 	dw_ced->ced.features = CLOCK_EVT_FEAT_PERIODIC |
 				CLOCK_EVT_FEAT_ONESHOT | CLOCK_EVT_FEAT_DYNIRQ;
 	dw_ced->ced.set_state_shutdown = apbt_shutdown;
-- 
2.25.1

[PATCH AUTOSEL 4.19 022/106] clocksource: dw_apb_timer_of: Fix missing clockevent timers

[Sasha Levin]

From: Serge Semin <Sergey.Semin@baikalelectronics.ru>

[ Upstream commit 6d2e16a3181bafb77b535095c39ad1c8b9558c8c ]

Commit 100214889973 ("clocksource: dw_apb_timer_of: use
clocksource_of_init") replaced a publicly available driver
initialization method with one called by the timer_probe() method
available after CLKSRC_OF. In current implementation it traverses
all the timers available in the system and calls their initialization
methods if corresponding devices were either in dtb or in acpi. But
if before the commit any number of available timers would be installed
as clockevent and clocksource devices, after that there would be at most
two. The rest are just ignored since default case branch doesn't do
anything. I don't see a reason of such behaviour, neither the commit
message explains it. Moreover this might be wrong if on some platforms
these timers might be used for different purpose, as virtually CPU-local
clockevent timers and as an independent broadcast timer. So in order
to keep the compatibility with the platforms where the order of the
timers detection has some meaning, lets add the secondly discovered
timer to be of clocksource/sched_clock type, while the very first and
the others would provide the clockevents service.

Fixes: 100214889973 ("clocksource: dw_apb_timer_of: use clocksource_of_init")
Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru>
Cc: Alexey Malahov <Alexey.Malahov@baikalelectronics.ru>
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Cc: Paul Burton <paulburton@kernel.org>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Alessandro Zummo <a.zummo@towertech.it>
Cc: Alexandre Belloni <alexandre.belloni@bootlin.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Rob Herring <robh+dt@kernel.org>
Cc: linux-mips@vger.kernel.org
Cc: linux-rtc@vger.kernel.org
Cc: devicetree@vger.kernel.org
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://lore.kernel.org/r/20200521204818.25436-7-Sergey.Semin@baikalelectronics.ru
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/clocksource/dw_apb_timer_of.c | 6 ++----
 1 file changed, 2 insertions(+), 4 deletions(-)

diff --git a/drivers/clocksource/dw_apb_timer_of.c b/drivers/clocksource/dw_apb_timer_of.c
index 69866cd8f4bb..3e4d0e5733d3 100644
--- a/drivers/clocksource/dw_apb_timer_of.c
+++ b/drivers/clocksource/dw_apb_timer_of.c
@@ -146,10 +146,6 @@ static int num_called;
 static int __init dw_apb_timer_init(struct device_node *timer)
 {
 	switch (num_called) {
-	case 0:
-		pr_debug("%s: found clockevent timer\n", __func__);
-		add_clockevent(timer);
-		break;
 	case 1:
 		pr_debug("%s: found clocksource timer\n", __func__);
 		add_clocksource(timer);
@@ -160,6 +156,8 @@ static int __init dw_apb_timer_init(struct device_node *timer)
 #endif
 		break;
 	default:
+		pr_debug("%s: found clockevent timer\n", __func__);
+		add_clockevent(timer);
 		break;
 	}
 
-- 
2.25.1

[PATCH AUTOSEL 4.19 023/106] btrfs: do not ignore error from btrfs_next_leaf() when inserting checksums

[Sasha Levin]

From: Filipe Manana <fdmanana@suse.com>

[ Upstream commit 7e4a3f7ed5d54926ec671bbb13e171cfe179cc50 ]

We are currently treating any non-zero return value from btrfs_next_leaf()
the same way, by going to the code that inserts a new checksum item in the
tree. However if btrfs_next_leaf() returns an error (a value < 0), we
should just stop and return the error, and not behave as if nothing has
happened, since in that case we do not have a way to know if there is a
next leaf or we are currently at the last leaf already.

So fix that by returning the error from btrfs_next_leaf().

Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 fs/btrfs/file-item.c | 6 ++++--
 1 file changed, 4 insertions(+), 2 deletions(-)

diff --git a/fs/btrfs/file-item.c b/fs/btrfs/file-item.c
index f9e280d0b44f..1b8a04b767ff 100644
--- a/fs/btrfs/file-item.c
+++ b/fs/btrfs/file-item.c
@@ -785,10 +785,12 @@ int btrfs_csum_file_blocks(struct btrfs_trans_handle *trans,
 		nritems = btrfs_header_nritems(path->nodes[0]);
 		if (!nritems || (path->slots[0] >= nritems - 1)) {
 			ret = btrfs_next_leaf(root, path);
-			if (ret == 1)
+			if (ret < 0) {
+				goto out;
+			} else if (ret > 0) {
 				found_next = 1;
-			if (ret != 0)
 				goto insert;
+			}
 			slot = path->slots[0];
 		}
 		btrfs_item_key_to_cpu(path->nodes[0], &found_key, slot);
-- 
2.25.1

[PATCH AUTOSEL 4.19 024/106] ARM: 8978/1: mm: make act_mm() respect THREAD_SIZE

[Sasha Levin]

From: Linus Walleij <linus.walleij@linaro.org>

[ Upstream commit e1de94380af588bdf6ad6f0cc1f75004c35bc096 ]

Recent work with KASan exposed the folling hard-coded bitmask
in arch/arm/mm/proc-macros.S:

  bic     rd, sp, #8128
  bic     rd, rd, #63

This forms the bitmask 0x1FFF that is coinciding with
(PAGE_SIZE << THREAD_SIZE_ORDER) - 1, this code was assuming
that THREAD_SIZE is always 8K (8192).

As KASan was increasing THREAD_SIZE_ORDER to 2, I ran into
this bug.

Fix it by this little oneline suggested by Ard:

  bic     rd, sp, #(THREAD_SIZE - 1) & ~63

Where THREAD_SIZE is defined using THREAD_SIZE_ORDER.

We have to also include <linux/const.h> since the THREAD_SIZE
expands to use the _AC() macro.

Cc: Ard Biesheuvel <ardb@kernel.org>
Cc: Florian Fainelli <f.fainelli@gmail.com>
Suggested-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm/mm/proc-macros.S | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/arch/arm/mm/proc-macros.S b/arch/arm/mm/proc-macros.S
index 5461d589a1e2..60ac7c5999a9 100644
--- a/arch/arm/mm/proc-macros.S
+++ b/arch/arm/mm/proc-macros.S
@@ -5,6 +5,7 @@
  *  VMA_VM_FLAGS
  *  VM_EXEC
  */
+#include <linux/const.h>
 #include <asm/asm-offsets.h>
 #include <asm/thread_info.h>
 
@@ -30,7 +31,7 @@
  * act_mm - get current->active_mm
  */
 	.macro	act_mm, rd
-	bic	\rd, sp, #8128
+	bic	\rd, sp, #(THREAD_SIZE - 1) & ~63
 	bic	\rd, \rd, #63
 	ldr	\rd, [\rd, #TI_TASK]
 	.if (TSK_ACTIVE_MM > IMM12_MASK)
-- 
2.25.1

[PATCH AUTOSEL 4.19 024/106] ARM: 8978/1: mm: make act_mm() respect THREAD_SIZE

[Sasha Levin]

From: Linus Walleij <linus.walleij@linaro.org>

[ Upstream commit e1de94380af588bdf6ad6f0cc1f75004c35bc096 ]

Recent work with KASan exposed the folling hard-coded bitmask
in arch/arm/mm/proc-macros.S:

  bic     rd, sp, #8128
  bic     rd, rd, #63

This forms the bitmask 0x1FFF that is coinciding with
(PAGE_SIZE << THREAD_SIZE_ORDER) - 1, this code was assuming
that THREAD_SIZE is always 8K (8192).

As KASan was increasing THREAD_SIZE_ORDER to 2, I ran into
this bug.

Fix it by this little oneline suggested by Ard:

  bic     rd, sp, #(THREAD_SIZE - 1) & ~63

Where THREAD_SIZE is defined using THREAD_SIZE_ORDER.

We have to also include <linux/const.h> since the THREAD_SIZE
expands to use the _AC() macro.

Cc: Ard Biesheuvel <ardb@kernel.org>
Cc: Florian Fainelli <f.fainelli@gmail.com>
Suggested-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm/mm/proc-macros.S | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/arch/arm/mm/proc-macros.S b/arch/arm/mm/proc-macros.S
index 5461d589a1e2..60ac7c5999a9 100644
--- a/arch/arm/mm/proc-macros.S
+++ b/arch/arm/mm/proc-macros.S
@@ -5,6 +5,7 @@
  *  VMA_VM_FLAGS
  *  VM_EXEC
  */
+#include <linux/const.h>
 #include <asm/asm-offsets.h>
 #include <asm/thread_info.h>
 
@@ -30,7 +31,7 @@
  * act_mm - get current->active_mm
  */
 	.macro	act_mm, rd
-	bic	\rd, sp, #8128
+	bic	\rd, sp, #(THREAD_SIZE - 1) & ~63
 	bic	\rd, \rd, #63
 	ldr	\rd, [\rd, #TI_TASK]
 	.if (TSK_ACTIVE_MM > IMM12_MASK)
-- 
2.25.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH AUTOSEL 4.19 025/106] batman-adv: Revert "disable ethtool link speed detection when auto negotiation off"

[Sasha Levin]

From: Sven Eckelmann <sven@narfation.org>

[ Upstream commit 9ad346c90509ebd983f60da7d082f261ad329507 ]

The commit 8c46fcd78308 ("batman-adv: disable ethtool link speed detection
when auto negotiation off") disabled the usage of ethtool's link_ksetting
when auto negotation was enabled due to invalid values when used with
tun/tap virtual net_devices. According to the patch, automatic measurements
should be used for these kind of interfaces.

But there are major flaws with this argumentation:

* automatic measurements are not implemented
* auto negotiation has nothing to do with the validity of the retrieved
  values

The first point has to be fixed by a longer patch series. The "validity"
part of the second point must be addressed in the same patch series by
dropping the usage of ethtool's link_ksetting (thus always doing automatic
measurements over ethernet).

Drop the patch again to have more default values for various net_device
types/configurations. The user can still overwrite them using the
batadv_hardif's BATADV_ATTR_THROUGHPUT_OVERRIDE.

Reported-by: Matthias Schiffer <mschiffer@universe-factory.net>
Signed-off-by: Sven Eckelmann <sven@narfation.org>
Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/batman-adv/bat_v_elp.c | 15 +--------------
 1 file changed, 1 insertion(+), 14 deletions(-)

diff --git a/net/batman-adv/bat_v_elp.c b/net/batman-adv/bat_v_elp.c
index 5da183b2f4c9..af3da6cdfc79 100644
--- a/net/batman-adv/bat_v_elp.c
+++ b/net/batman-adv/bat_v_elp.c
@@ -132,20 +132,7 @@ static u32 batadv_v_elp_get_throughput(struct batadv_hardif_neigh_node *neigh)
 	rtnl_lock();
 	ret = __ethtool_get_link_ksettings(hard_iface->net_dev, &link_settings);
 	rtnl_unlock();
-
-	/* Virtual interface drivers such as tun / tap interfaces, VLAN, etc
-	 * tend to initialize the interface throughput with some value for the
-	 * sake of having a throughput number to export via ethtool. This
-	 * exported throughput leaves batman-adv to conclude the interface
-	 * throughput is genuine (reflecting reality), thus no measurements
-	 * are necessary.
-	 *
-	 * Based on the observation that those interface types also tend to set
-	 * the link auto-negotiation to 'off', batman-adv shall check this
-	 * setting to differentiate between genuine link throughput information
-	 * and placeholders installed by virtual interfaces.
-	 */
-	if (ret == 0 && link_settings.base.autoneg == AUTONEG_ENABLE) {
+	if (ret == 0) {
 		/* link characteristics might change over time */
 		if (link_settings.base.duplex == DUPLEX_FULL)
 			hard_iface->bat_v.flags |= BATADV_FULL_DUPLEX;
-- 
2.25.1

[PATCH AUTOSEL 4.19 026/106] mmc: meson-mx-sdio: trigger a soft reset after a timeout or CRC error

[Sasha Levin]

From: Martin Blumenstingl <martin.blumenstingl@googlemail.com>

[ Upstream commit 91995b904ec2e44b5c159ac6a5d3f154345a4de7 ]

The vendor driver (from the 3.10 kernel) triggers a soft reset every
time before starting a new command. While this fixes a problem where
SDIO cards are not detected at all (because all commands simply
timed out) this hurts SD card read performance a bit (in my tests
between 10% to 20%).

Trigger a soft reset after we got a CRC error or if the previous command
timed out (just like the vendor driver from the same 3.10 kernel for the
newer SDHC controller IP does). This fixes detection of SDIO cards and
doesn't hurt SD card read performance at the same time.

With this patch the initialization of an RTL8723BS SDIO card looks like
this:
  req done (CMD52): -110: 00000000 00000000 00000000 00000000
  clock 400000Hz busmode 2 powermode 2 cs 1 Vdd 21 width 1 timing 0
  starting CMD0 arg 00000000 flags 000000c0
  req done (CMD0): 0: 00000000 00000000 00000000 00000000
  clock 400000Hz busmode 2 powermode 2 cs 0 Vdd 21 width 1 timing 0
  starting CMD8 arg 000001aa flags 000002f5
  req done (CMD8): -110: 00000000 00000000 00000000 00000000
  starting CMD5 arg 00000000 flags 000002e1
  req done (CMD5): 0: 90ff0000 00000000 00000000 00000000
  starting CMD5 arg 00200000 flags 000002e1
  req done (CMD5): 0: 90ff0000 00000000 00000000 00000000
  starting CMD3 arg 00000000 flags 00000075
  req done (CMD3): 0: 00010000 00000000 00000000 00000000
  starting CMD7 arg 00010000 flags 00000015
  req done (CMD7): 0: 00001e00 00000000 00000000 00000000
  starting CMD52 arg 00000000 flags 00000195
  req done (CMD52): 0: 00001032 00000000 00000000 00000000
  [... more CMD52 omitted ...]
  clock 400000Hz busmode 2 powermode 2 cs 0 Vdd 21 width 1 timing 2
  clock 50000000Hz busmode 2 powermode 2 cs 0 Vdd 21 width 1 timing 2
  starting CMD52 arg 00000e00 flags 00000195
  req done (CMD52): 0: 00001000 00000000 00000000 00000000
  starting CMD52 arg 80000e02 flags 00000195
  req done (CMD52): 0: 00001002 00000000 00000000 00000000
  clock 50000000Hz busmode 2 powermode 2 cs 0 Vdd 21 width 4 timing 2
  starting CMD52 arg 00020000 flags 00000195
  req done (CMD52): 0: 00001007 00000000 00000000 00000000
  [... more CMD52 omitted ...]
  new high speed SDIO card at address 0001

Fixes: ed80a13bb4c4c9 ("mmc: meson-mx-sdio: Add a driver for the Amlogic Meson8 and Meson8b SoCs")
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Link: https://lore.kernel.org/r/20200503222805.2668941-1-martin.blumenstingl@googlemail.com
Tested-by: Tobias Baumann <017623705678@o2online.de>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/mmc/host/meson-mx-sdio.c | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/drivers/mmc/host/meson-mx-sdio.c b/drivers/mmc/host/meson-mx-sdio.c
index 1c062473b1c2..27837a794e7b 100644
--- a/drivers/mmc/host/meson-mx-sdio.c
+++ b/drivers/mmc/host/meson-mx-sdio.c
@@ -249,6 +249,9 @@ static void meson_mx_mmc_request_done(struct meson_mx_mmc_host *host)
 
 	mrq = host->mrq;
 
+	if (host->cmd->error)
+		meson_mx_mmc_soft_reset(host);
+
 	host->mrq = NULL;
 	host->cmd = NULL;
 
-- 
2.25.1

[PATCH AUTOSEL 4.19 026/106] mmc: meson-mx-sdio: trigger a soft reset after a timeout or CRC error

[Sasha Levin]

From: Martin Blumenstingl <martin.blumenstingl@googlemail.com>

[ Upstream commit 91995b904ec2e44b5c159ac6a5d3f154345a4de7 ]

The vendor driver (from the 3.10 kernel) triggers a soft reset every
time before starting a new command. While this fixes a problem where
SDIO cards are not detected at all (because all commands simply
timed out) this hurts SD card read performance a bit (in my tests
between 10% to 20%).

Trigger a soft reset after we got a CRC error or if the previous command
timed out (just like the vendor driver from the same 3.10 kernel for the
newer SDHC controller IP does). This fixes detection of SDIO cards and
doesn't hurt SD card read performance at the same time.

With this patch the initialization of an RTL8723BS SDIO card looks like
this:
  req done (CMD52): -110: 00000000 00000000 00000000 00000000
  clock 400000Hz busmode 2 powermode 2 cs 1 Vdd 21 width 1 timing 0
  starting CMD0 arg 00000000 flags 000000c0
  req done (CMD0): 0: 00000000 00000000 00000000 00000000
  clock 400000Hz busmode 2 powermode 2 cs 0 Vdd 21 width 1 timing 0
  starting CMD8 arg 000001aa flags 000002f5
  req done (CMD8): -110: 00000000 00000000 00000000 00000000
  starting CMD5 arg 00000000 flags 000002e1
  req done (CMD5): 0: 90ff0000 00000000 00000000 00000000
  starting CMD5 arg 00200000 flags 000002e1
  req done (CMD5): 0: 90ff0000 00000000 00000000 00000000
  starting CMD3 arg 00000000 flags 00000075
  req done (CMD3): 0: 00010000 00000000 00000000 00000000
  starting CMD7 arg 00010000 flags 00000015
  req done (CMD7): 0: 00001e00 00000000 00000000 00000000
  starting CMD52 arg 00000000 flags 00000195
  req done (CMD52): 0: 00001032 00000000 00000000 00000000
  [... more CMD52 omitted ...]
  clock 400000Hz busmode 2 powermode 2 cs 0 Vdd 21 width 1 timing 2
  clock 50000000Hz busmode 2 powermode 2 cs 0 Vdd 21 width 1 timing 2
  starting CMD52 arg 00000e00 flags 00000195
  req done (CMD52): 0: 00001000 00000000 00000000 00000000
  starting CMD52 arg 80000e02 flags 00000195
  req done (CMD52): 0: 00001002 00000000 00000000 00000000
  clock 50000000Hz busmode 2 powermode 2 cs 0 Vdd 21 width 4 timing 2
  starting CMD52 arg 00020000 flags 00000195
  req done (CMD52): 0: 00001007 00000000 00000000 00000000
  [... more CMD52 omitted ...]
  new high speed SDIO card at address 0001

Fixes: ed80a13bb4c4c9 ("mmc: meson-mx-sdio: Add a driver for the Amlogic Meson8 and Meson8b SoCs")
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Link: https://lore.kernel.org/r/20200503222805.2668941-1-martin.blumenstingl@googlemail.com
Tested-by: Tobias Baumann <017623705678@o2online.de>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/mmc/host/meson-mx-sdio.c | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/drivers/mmc/host/meson-mx-sdio.c b/drivers/mmc/host/meson-mx-sdio.c
index 1c062473b1c2..27837a794e7b 100644
--- a/drivers/mmc/host/meson-mx-sdio.c
+++ b/drivers/mmc/host/meson-mx-sdio.c
@@ -249,6 +249,9 @@ static void meson_mx_mmc_request_done(struct meson_mx_mmc_host *host)
 
 	mrq = host->mrq;
 
+	if (host->cmd->error)
+		meson_mx_mmc_soft_reset(host);
+
 	host->mrq = NULL;
 	host->cmd = NULL;
 
-- 
2.25.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH AUTOSEL 4.19 026/106] mmc: meson-mx-sdio: trigger a soft reset after a timeout or CRC error

[Sasha Levin]

From: Martin Blumenstingl <martin.blumenstingl@googlemail.com>

[ Upstream commit 91995b904ec2e44b5c159ac6a5d3f154345a4de7 ]

The vendor driver (from the 3.10 kernel) triggers a soft reset every
time before starting a new command. While this fixes a problem where
SDIO cards are not detected at all (because all commands simply
timed out) this hurts SD card read performance a bit (in my tests
between 10% to 20%).

Trigger a soft reset after we got a CRC error or if the previous command
timed out (just like the vendor driver from the same 3.10 kernel for the
newer SDHC controller IP does). This fixes detection of SDIO cards and
doesn't hurt SD card read performance at the same time.

With this patch the initialization of an RTL8723BS SDIO card looks like
this:
  req done (CMD52): -110: 00000000 00000000 00000000 00000000
  clock 400000Hz busmode 2 powermode 2 cs 1 Vdd 21 width 1 timing 0
  starting CMD0 arg 00000000 flags 000000c0
  req done (CMD0): 0: 00000000 00000000 00000000 00000000
  clock 400000Hz busmode 2 powermode 2 cs 0 Vdd 21 width 1 timing 0
  starting CMD8 arg 000001aa flags 000002f5
  req done (CMD8): -110: 00000000 00000000 00000000 00000000
  starting CMD5 arg 00000000 flags 000002e1
  req done (CMD5): 0: 90ff0000 00000000 00000000 00000000
  starting CMD5 arg 00200000 flags 000002e1
  req done (CMD5): 0: 90ff0000 00000000 00000000 00000000
  starting CMD3 arg 00000000 flags 00000075
  req done (CMD3): 0: 00010000 00000000 00000000 00000000
  starting CMD7 arg 00010000 flags 00000015
  req done (CMD7): 0: 00001e00 00000000 00000000 00000000
  starting CMD52 arg 00000000 flags 00000195
  req done (CMD52): 0: 00001032 00000000 00000000 00000000
  [... more CMD52 omitted ...]
  clock 400000Hz busmode 2 powermode 2 cs 0 Vdd 21 width 1 timing 2
  clock 50000000Hz busmode 2 powermode 2 cs 0 Vdd 21 width 1 timing 2
  starting CMD52 arg 00000e00 flags 00000195
  req done (CMD52): 0: 00001000 00000000 00000000 00000000
  starting CMD52 arg 80000e02 flags 00000195
  req done (CMD52): 0: 00001002 00000000 00000000 00000000
  clock 50000000Hz busmode 2 powermode 2 cs 0 Vdd 21 width 4 timing 2
  starting CMD52 arg 00020000 flags 00000195
  req done (CMD52): 0: 00001007 00000000 00000000 00000000
  [... more CMD52 omitted ...]
  new high speed SDIO card at address 0001

Fixes: ed80a13bb4c4c9 ("mmc: meson-mx-sdio: Add a driver for the Amlogic Meson8 and Meson8b SoCs")
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Link: https://lore.kernel.org/r/20200503222805.2668941-1-martin.blumenstingl@googlemail.com
Tested-by: Tobias Baumann <017623705678@o2online.de>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/mmc/host/meson-mx-sdio.c | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/drivers/mmc/host/meson-mx-sdio.c b/drivers/mmc/host/meson-mx-sdio.c
index 1c062473b1c2..27837a794e7b 100644
--- a/drivers/mmc/host/meson-mx-sdio.c
+++ b/drivers/mmc/host/meson-mx-sdio.c
@@ -249,6 +249,9 @@ static void meson_mx_mmc_request_done(struct meson_mx_mmc_host *host)
 
 	mrq = host->mrq;
 
+	if (host->cmd->error)
+		meson_mx_mmc_soft_reset(host);
+
 	host->mrq = NULL;
 	host->cmd = NULL;
 
-- 
2.25.1


_______________________________________________
linux-amlogic mailing list
linux-amlogic@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-amlogic

[PATCH AUTOSEL 4.19 027/106] spi: dw: Fix Rx-only DMA transfers

[Sasha Levin]

From: Serge Semin <Sergey.Semin@baikalelectronics.ru>

[ Upstream commit 46164fde6b7890e7a3982d54549947c8394c0192 ]

Tx-only DMA transfers are working perfectly fine since in this case
the code just ignores the Rx FIFO overflow interrupts. But it turns
out the SPI Rx-only transfers are broken since nothing pushing any
data to the shift registers, so the Rx FIFO is left empty and the
SPI core subsystems just returns a timeout error. Since DW DMAC
driver doesn't support something like cyclic write operations of
a single byte to a device register, the only way to support the
Rx-only SPI transfers is to fake it by using a dummy Tx-buffer.
This is what we intend to fix in this commit by setting the
SPI_CONTROLLER_MUST_TX flag for DMA-capable platform.

Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: Georgy Vlasov <Georgy.Vlasov@baikalelectronics.ru>
Cc: Ramil Zaripov <Ramil.Zaripov@baikalelectronics.ru>
Cc: Alexey Malahov <Alexey.Malahov@baikalelectronics.ru>
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Feng Tang <feng.tang@intel.com>
Cc: Rob Herring <robh+dt@kernel.org>
Cc: linux-mips@vger.kernel.org
Cc: devicetree@vger.kernel.org
Link: https://lore.kernel.org/r/20200529131205.31838-9-Sergey.Semin@baikalelectronics.ru
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/spi/spi-dw.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/spi/spi-dw.c b/drivers/spi/spi-dw.c
index 5a47e28e38c1..2207bf17f6a6 100644
--- a/drivers/spi/spi-dw.c
+++ b/drivers/spi/spi-dw.c
@@ -530,6 +530,7 @@ int dw_spi_add_host(struct device *dev, struct dw_spi *dws)
 			dws->dma_inited = 0;
 		} else {
 			master->can_dma = dws->dma_ops->can_dma;
+			master->flags |= SPI_CONTROLLER_MUST_TX;
 		}
 	}
 
-- 
2.25.1

[PATCH AUTOSEL 4.19 028/106] x86/kvm/hyper-v: Explicitly align hcall param for kvm_hyperv_exit

[Sasha Levin]

From: Jon Doron <arilou@gmail.com>

[ Upstream commit f7d31e65368aeef973fab788aa22c4f1d5a6af66 ]

The problem the patch is trying to address is the fact that 'struct
kvm_hyperv_exit' has different layout on when compiling in 32 and 64 bit
modes.

In 64-bit mode the default alignment boundary is 64 bits thus
forcing extra gaps after 'type' and 'msr' but in 32-bit mode the
boundary is at 32 bits thus no extra gaps.

This is an issue as even when the kernel is 64 bit, the userspace using
the interface can be both 32 and 64 bit but the same 32 bit userspace has
to work with 32 bit kernel.

The issue is fixed by forcing the 64 bit layout, this leads to ABI
change for 32 bit builds and while we are obviously breaking '32 bit
userspace with 32 bit kernel' case, we're fixing the '32 bit userspace
with 64 bit kernel' one.

As the interface has no (known) users and 32 bit KVM is rather baroque
nowadays, this seems like a reasonable decision.

Reviewed-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Signed-off-by: Jon Doron <arilou@gmail.com>
Message-Id: <20200424113746.3473563-2-arilou@gmail.com>
Reviewed-by: Roman Kagan <rvkagan@yandex-team.ru>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 Documentation/virtual/kvm/api.txt | 2 ++
 include/uapi/linux/kvm.h          | 2 ++
 2 files changed, 4 insertions(+)

diff --git a/Documentation/virtual/kvm/api.txt b/Documentation/virtual/kvm/api.txt
index 8e16017ff397..d2f265a9dc0d 100644
--- a/Documentation/virtual/kvm/api.txt
+++ b/Documentation/virtual/kvm/api.txt
@@ -3999,9 +3999,11 @@ EOI was received.
 #define KVM_EXIT_HYPERV_SYNIC          1
 #define KVM_EXIT_HYPERV_HCALL          2
 			__u32 type;
+			__u32 pad1;
 			union {
 				struct {
 					__u32 msr;
+					__u32 pad2;
 					__u64 control;
 					__u64 evt_page;
 					__u64 msg_page;
diff --git a/include/uapi/linux/kvm.h b/include/uapi/linux/kvm.h
index 251be353f950..66ce6659ecb6 100644
--- a/include/uapi/linux/kvm.h
+++ b/include/uapi/linux/kvm.h
@@ -189,9 +189,11 @@ struct kvm_hyperv_exit {
 #define KVM_EXIT_HYPERV_SYNIC          1
 #define KVM_EXIT_HYPERV_HCALL          2
 	__u32 type;
+	__u32 pad1;
 	union {
 		struct {
 			__u32 msr;
+			__u32 pad2;
 			__u64 control;
 			__u64 evt_page;
 			__u64 msg_page;
-- 
2.25.1

[PATCH AUTOSEL 4.19 029/106] net: vmxnet3: fix possible buffer overflow caused by bad DMA value in vmxnet3_get_rss()

[Sasha Levin]

From: Jia-Ju Bai <baijiaju1990@gmail.com>

[ Upstream commit 3e1c6846b9e108740ef8a37be80314053f5dd52a ]

The value adapter->rss_conf is stored in DMA memory, and it is assigned
to rssConf, so rssConf->indTableSize can be modified at anytime by
malicious hardware. Because rssConf->indTableSize is assigned to n,
buffer overflow may occur when the code "rssConf->indTable[n]" is
executed.

To fix this possible bug, n is checked after being used.

Signed-off-by: Jia-Ju Bai <baijiaju1990@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/vmxnet3/vmxnet3_ethtool.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/drivers/net/vmxnet3/vmxnet3_ethtool.c b/drivers/net/vmxnet3/vmxnet3_ethtool.c
index 559db051a500..88d18ab83e54 100644
--- a/drivers/net/vmxnet3/vmxnet3_ethtool.c
+++ b/drivers/net/vmxnet3/vmxnet3_ethtool.c
@@ -692,6 +692,8 @@ vmxnet3_get_rss(struct net_device *netdev, u32 *p, u8 *key, u8 *hfunc)
 		*hfunc = ETH_RSS_HASH_TOP;
 	if (!p)
 		return 0;
+	if (n > UPT1_RSS_MAX_IND_TABLE_SIZE)
+		return 0;
 	while (n--)
 		p[n] = rssConf->indTable[n];
 	return 0;
-- 
2.25.1

[PATCH AUTOSEL 4.19 030/106] staging: android: ion: use vmap instead of vm_map_ram

[Sasha Levin]

From: Christoph Hellwig <hch@lst.de>

[ Upstream commit 5bf9917452112694b2c774465ee4dbe441c84b77 ]

vm_map_ram can keep mappings around after the vm_unmap_ram.  Using that
with non-PAGE_KERNEL mappings can lead to all kinds of aliasing issues.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Christian Borntraeger <borntraeger@de.ibm.com>
Cc: Christophe Leroy <christophe.leroy@c-s.fr>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: David Airlie <airlied@linux.ie>
Cc: Gao Xiang <xiang@kernel.org>
Cc: Haiyang Zhang <haiyangz@microsoft.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: "K. Y. Srinivasan" <kys@microsoft.com>
Cc: Laura Abbott <labbott@redhat.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Michael Kelley <mikelley@microsoft.com>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Nitin Gupta <ngupta@vflare.org>
Cc: Robin Murphy <robin.murphy@arm.com>
Cc: Sakari Ailus <sakari.ailus@linux.intel.com>
Cc: Stephen Hemminger <sthemmin@microsoft.com>
Cc: Sumit Semwal <sumit.semwal@linaro.org>
Cc: Wei Liu <wei.liu@kernel.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Paul Mackerras <paulus@ozlabs.org>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Cc: Will Deacon <will@kernel.org>
Link: http://lkml.kernel.org/r/20200414131348.444715-4-hch@lst.de
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/staging/android/ion/ion_heap.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/staging/android/ion/ion_heap.c b/drivers/staging/android/ion/ion_heap.c
index 31db510018a9..6babcdb4d7d2 100644
--- a/drivers/staging/android/ion/ion_heap.c
+++ b/drivers/staging/android/ion/ion_heap.c
@@ -97,12 +97,12 @@ int ion_heap_map_user(struct ion_heap *heap, struct ion_buffer *buffer,
 
 static int ion_heap_clear_pages(struct page **pages, int num, pgprot_t pgprot)
 {
-	void *addr = vm_map_ram(pages, num, -1, pgprot);
+	void *addr = vmap(pages, num, VM_MAP, pgprot);
 
 	if (!addr)
 		return -ENOMEM;
 	memset(addr, 0, PAGE_SIZE * num);
-	vm_unmap_ram(addr, num);
+	vunmap(addr);
 
 	return 0;
 }
-- 
2.25.1

[PATCH AUTOSEL 4.19 030/106] staging: android: ion: use vmap instead of vm_map_ram

[Sasha Levin]

From: Christoph Hellwig <hch@lst.de>

[ Upstream commit 5bf9917452112694b2c774465ee4dbe441c84b77 ]

vm_map_ram can keep mappings around after the vm_unmap_ram.  Using that
with non-PAGE_KERNEL mappings can lead to all kinds of aliasing issues.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Christian Borntraeger <borntraeger@de.ibm.com>
Cc: Christophe Leroy <christophe.leroy@c-s.fr>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: David Airlie <airlied@linux.ie>
Cc: Gao Xiang <xiang@kernel.org>
Cc: Haiyang Zhang <haiyangz@microsoft.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: "K. Y. Srinivasan" <kys@microsoft.com>
Cc: Laura Abbott <labbott@redhat.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Michael Kelley <mikelley@microsoft.com>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Nitin Gupta <ngupta@vflare.org>
Cc: Robin Murphy <robin.murphy@arm.com>
Cc: Sakari Ailus <sakari.ailus@linux.intel.com>
Cc: Stephen Hemminger <sthemmin@microsoft.com>
Cc: Sumit Semwal <sumit.semwal@linaro.org>
Cc: Wei Liu <wei.liu@kernel.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Paul Mackerras <paulus@ozlabs.org>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Cc: Will Deacon <will@kernel.org>
Link: http://lkml.kernel.org/r/20200414131348.444715-4-hch@lst.de
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/staging/android/ion/ion_heap.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/staging/android/ion/ion_heap.c b/drivers/staging/android/ion/ion_heap.c
index 31db510018a9..6babcdb4d7d2 100644
--- a/drivers/staging/android/ion/ion_heap.c
+++ b/drivers/staging/android/ion/ion_heap.c
@@ -97,12 +97,12 @@ int ion_heap_map_user(struct ion_heap *heap, struct ion_buffer *buffer,
 
 static int ion_heap_clear_pages(struct page **pages, int num, pgprot_t pgprot)
 {
-	void *addr = vm_map_ram(pages, num, -1, pgprot);
+	void *addr = vmap(pages, num, VM_MAP, pgprot);
 
 	if (!addr)
 		return -ENOMEM;
 	memset(addr, 0, PAGE_SIZE * num);
-	vm_unmap_ram(addr, num);
+	vunmap(addr);
 
 	return 0;
 }
-- 
2.25.1

_______________________________________________
devel mailing list
devel@linuxdriverproject.org
http://driverdev.linuxdriverproject.org/mailman/listinfo/driverdev-devel

[PATCH AUTOSEL 4.19 030/106] staging: android: ion: use vmap instead of vm_map_ram

[Sasha Levin]

From: Christoph Hellwig <hch@lst.de>

[ Upstream commit 5bf9917452112694b2c774465ee4dbe441c84b77 ]

vm_map_ram can keep mappings around after the vm_unmap_ram.  Using that
with non-PAGE_KERNEL mappings can lead to all kinds of aliasing issues.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Christian Borntraeger <borntraeger@de.ibm.com>
Cc: Christophe Leroy <christophe.leroy@c-s.fr>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: David Airlie <airlied@linux.ie>
Cc: Gao Xiang <xiang@kernel.org>
Cc: Haiyang Zhang <haiyangz@microsoft.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: "K. Y. Srinivasan" <kys@microsoft.com>
Cc: Laura Abbott <labbott@redhat.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Michael Kelley <mikelley@microsoft.com>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Nitin Gupta <ngupta@vflare.org>
Cc: Robin Murphy <robin.murphy@arm.com>
Cc: Sakari Ailus <sakari.ailus@linux.intel.com>
Cc: Stephen Hemminger <sthemmin@microsoft.com>
Cc: Sumit Semwal <sumit.semwal@linaro.org>
Cc: Wei Liu <wei.liu@kernel.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Paul Mackerras <paulus@ozlabs.org>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Cc: Will Deacon <will@kernel.org>
Link: http://lkml.kernel.org/r/20200414131348.444715-4-hch@lst.de
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/staging/android/ion/ion_heap.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/staging/android/ion/ion_heap.c b/drivers/staging/android/ion/ion_heap.c
index 31db510018a9..6babcdb4d7d2 100644
--- a/drivers/staging/android/ion/ion_heap.c
+++ b/drivers/staging/android/ion/ion_heap.c
@@ -97,12 +97,12 @@ int ion_heap_map_user(struct ion_heap *heap, struct ion_buffer *buffer,
 
 static int ion_heap_clear_pages(struct page **pages, int num, pgprot_t pgprot)
 {
-	void *addr = vm_map_ram(pages, num, -1, pgprot);
+	void *addr = vmap(pages, num, VM_MAP, pgprot);
 
 	if (!addr)
 		return -ENOMEM;
 	memset(addr, 0, PAGE_SIZE * num);
-	vm_unmap_ram(addr, num);
+	vunmap(addr);
 
 	return 0;
 }
-- 
2.25.1

_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel

[PATCH AUTOSEL 4.19 031/106] ath9k: Fix use-after-free Read in ath9k_wmi_ctrl_rx

[Sasha Levin]

From: Qiujun Huang <hqjagain@gmail.com>

[ Upstream commit abeaa85054ff8cfe8b99aafc5c70ea067e5d0908 ]

Free wmi later after cmd urb has been killed, as urb cb will access wmi.

the case reported by syzbot:
https://lore.kernel.org/linux-usb/0000000000000002fc05a1d61a68@google.com
BUG: KASAN: use-after-free in ath9k_wmi_ctrl_rx+0x416/0x500
drivers/net/wireless/ath/ath9k/wmi.c:215
Read of size 1 at addr ffff8881cef1417c by task swapper/1/0

Call Trace:
<IRQ>
ath9k_wmi_ctrl_rx+0x416/0x500 drivers/net/wireless/ath/ath9k/wmi.c:215
ath9k_htc_rx_msg+0x2da/0xaf0
drivers/net/wireless/ath/ath9k/htc_hst.c:459
ath9k_hif_usb_reg_in_cb+0x1ba/0x630
drivers/net/wireless/ath/ath9k/hif_usb.c:718
__usb_hcd_giveback_urb+0x29a/0x550 drivers/usb/core/hcd.c:1650
usb_hcd_giveback_urb+0x368/0x420 drivers/usb/core/hcd.c:1716
dummy_timer+0x1258/0x32ae drivers/usb/gadget/udc/dummy_hcd.c:1966
call_timer_fn+0x195/0x6f0 kernel/time/timer.c:1404
expire_timers kernel/time/timer.c:1449 [inline]
__run_timers kernel/time/timer.c:1773 [inline]
__run_timers kernel/time/timer.c:1740 [inline]
run_timer_softirq+0x5f9/0x1500 kernel/time/timer.c:1786

Reported-and-tested-by: syzbot+5d338854440137ea0fef@syzkaller.appspotmail.com
Signed-off-by: Qiujun Huang <hqjagain@gmail.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20200404041838.10426-3-hqjagain@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/wireless/ath/ath9k/hif_usb.c      |  5 +++--
 drivers/net/wireless/ath/ath9k/hif_usb.h      |  1 +
 drivers/net/wireless/ath/ath9k/htc_drv_init.c | 10 +++++++---
 drivers/net/wireless/ath/ath9k/wmi.c          |  5 ++++-
 drivers/net/wireless/ath/ath9k/wmi.h          |  3 ++-
 5 files changed, 17 insertions(+), 7 deletions(-)

diff --git a/drivers/net/wireless/ath/ath9k/hif_usb.c b/drivers/net/wireless/ath/ath9k/hif_usb.c
index c4a2b7201ce3..6049d3766c64 100644
--- a/drivers/net/wireless/ath/ath9k/hif_usb.c
+++ b/drivers/net/wireless/ath/ath9k/hif_usb.c
@@ -978,7 +978,7 @@ static int ath9k_hif_usb_alloc_urbs(struct hif_device_usb *hif_dev)
 	return -ENOMEM;
 }
 
-static void ath9k_hif_usb_dealloc_urbs(struct hif_device_usb *hif_dev)
+void ath9k_hif_usb_dealloc_urbs(struct hif_device_usb *hif_dev)
 {
 	usb_kill_anchored_urbs(&hif_dev->regout_submitted);
 	ath9k_hif_usb_dealloc_reg_in_urbs(hif_dev);
@@ -1346,8 +1346,9 @@ static void ath9k_hif_usb_disconnect(struct usb_interface *interface)
 
 	if (hif_dev->flags & HIF_USB_READY) {
 		ath9k_htc_hw_deinit(hif_dev->htc_handle, unplugged);
-		ath9k_htc_hw_free(hif_dev->htc_handle);
 		ath9k_hif_usb_dev_deinit(hif_dev);
+		ath9k_destoy_wmi(hif_dev->htc_handle->drv_priv);
+		ath9k_htc_hw_free(hif_dev->htc_handle);
 	}
 
 	usb_set_intfdata(interface, NULL);
diff --git a/drivers/net/wireless/ath/ath9k/hif_usb.h b/drivers/net/wireless/ath/ath9k/hif_usb.h
index 7846916aa01d..a94e7e1c86e9 100644
--- a/drivers/net/wireless/ath/ath9k/hif_usb.h
+++ b/drivers/net/wireless/ath/ath9k/hif_usb.h
@@ -133,5 +133,6 @@ struct hif_device_usb {
 
 int ath9k_hif_usb_init(void);
 void ath9k_hif_usb_exit(void);
+void ath9k_hif_usb_dealloc_urbs(struct hif_device_usb *hif_dev);
 
 #endif /* HTC_USB_H */
diff --git a/drivers/net/wireless/ath/ath9k/htc_drv_init.c b/drivers/net/wireless/ath/ath9k/htc_drv_init.c
index 214c68269a69..27d9fe6799f5 100644
--- a/drivers/net/wireless/ath/ath9k/htc_drv_init.c
+++ b/drivers/net/wireless/ath/ath9k/htc_drv_init.c
@@ -933,8 +933,9 @@ static int ath9k_init_device(struct ath9k_htc_priv *priv,
 int ath9k_htc_probe_device(struct htc_target *htc_handle, struct device *dev,
 			   u16 devid, char *product, u32 drv_info)
 {
-	struct ieee80211_hw *hw;
+	struct hif_device_usb *hif_dev;
 	struct ath9k_htc_priv *priv;
+	struct ieee80211_hw *hw;
 	int ret;
 
 	hw = ieee80211_alloc_hw(sizeof(struct ath9k_htc_priv), &ath9k_htc_ops);
@@ -969,7 +970,10 @@ int ath9k_htc_probe_device(struct htc_target *htc_handle, struct device *dev,
 	return 0;
 
 err_init:
-	ath9k_deinit_wmi(priv);
+	ath9k_stop_wmi(priv);
+	hif_dev = (struct hif_device_usb *)htc_handle->hif_dev;
+	ath9k_hif_usb_dealloc_urbs(hif_dev);
+	ath9k_destoy_wmi(priv);
 err_free:
 	ieee80211_free_hw(hw);
 	return ret;
@@ -984,7 +988,7 @@ void ath9k_htc_disconnect_device(struct htc_target *htc_handle, bool hotunplug)
 			htc_handle->drv_priv->ah->ah_flags |= AH_UNPLUGGED;
 
 		ath9k_deinit_device(htc_handle->drv_priv);
-		ath9k_deinit_wmi(htc_handle->drv_priv);
+		ath9k_stop_wmi(htc_handle->drv_priv);
 		ieee80211_free_hw(htc_handle->drv_priv->hw);
 	}
 }
diff --git a/drivers/net/wireless/ath/ath9k/wmi.c b/drivers/net/wireless/ath/ath9k/wmi.c
index d1f6710ca63b..e7a3127395be 100644
--- a/drivers/net/wireless/ath/ath9k/wmi.c
+++ b/drivers/net/wireless/ath/ath9k/wmi.c
@@ -112,14 +112,17 @@ struct wmi *ath9k_init_wmi(struct ath9k_htc_priv *priv)
 	return wmi;
 }
 
-void ath9k_deinit_wmi(struct ath9k_htc_priv *priv)
+void ath9k_stop_wmi(struct ath9k_htc_priv *priv)
 {
 	struct wmi *wmi = priv->wmi;
 
 	mutex_lock(&wmi->op_mutex);
 	wmi->stopped = true;
 	mutex_unlock(&wmi->op_mutex);
+}
 
+void ath9k_destoy_wmi(struct ath9k_htc_priv *priv)
+{
 	kfree(priv->wmi);
 }
 
diff --git a/drivers/net/wireless/ath/ath9k/wmi.h b/drivers/net/wireless/ath/ath9k/wmi.h
index 380175d5ecd7..d8b912206232 100644
--- a/drivers/net/wireless/ath/ath9k/wmi.h
+++ b/drivers/net/wireless/ath/ath9k/wmi.h
@@ -179,7 +179,6 @@ struct wmi {
 };
 
 struct wmi *ath9k_init_wmi(struct ath9k_htc_priv *priv);
-void ath9k_deinit_wmi(struct ath9k_htc_priv *priv);
 int ath9k_wmi_connect(struct htc_target *htc, struct wmi *wmi,
 		      enum htc_endpoint_id *wmi_ctrl_epid);
 int ath9k_wmi_cmd(struct wmi *wmi, enum wmi_cmd_id cmd_id,
@@ -189,6 +188,8 @@ int ath9k_wmi_cmd(struct wmi *wmi, enum wmi_cmd_id cmd_id,
 void ath9k_wmi_event_tasklet(unsigned long data);
 void ath9k_fatal_work(struct work_struct *work);
 void ath9k_wmi_event_drain(struct ath9k_htc_priv *priv);
+void ath9k_stop_wmi(struct ath9k_htc_priv *priv);
+void ath9k_destoy_wmi(struct ath9k_htc_priv *priv);
 
 #define WMI_CMD(_wmi_cmd)						\
 	do {								\
-- 
2.25.1

[PATCH AUTOSEL 4.19 032/106] ath9k: Fix general protection fault in ath9k_hif_usb_rx_cb

[Sasha Levin]

From: Qiujun Huang <hqjagain@gmail.com>

[ Upstream commit 2bbcaaee1fcbd83272e29f31e2bb7e70d8c49e05 ]

In ath9k_hif_usb_rx_cb interface number is assumed to be 0.
usb_ifnum_to_if(urb->dev, 0)
But it isn't always true.

The case reported by syzbot:
https://lore.kernel.org/linux-usb/000000000000666c9c05a1c05d12@google.com
usb 2-1: new high-speed USB device number 2 using dummy_hcd
usb 2-1: config 1 has an invalid interface number: 2 but max is 0
usb 2-1: config 1 has no interface number 0
usb 2-1: New USB device found, idVendor=0cf3, idProduct=9271, bcdDevice=
1.08
usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
general protection fault, probably for non-canonical address
0xdffffc0000000015: 0000 [#1] SMP KASAN
KASAN: null-ptr-deref in range [0x00000000000000a8-0x00000000000000af]
CPU: 0 PID: 0 Comm: swapper/0 Not tainted 5.6.0-rc5-syzkaller #0

Call Trace
__usb_hcd_giveback_urb+0x29a/0x550 drivers/usb/core/hcd.c:1650
usb_hcd_giveback_urb+0x368/0x420 drivers/usb/core/hcd.c:1716
dummy_timer+0x1258/0x32ae drivers/usb/gadget/udc/dummy_hcd.c:1966
call_timer_fn+0x195/0x6f0 kernel/time/timer.c:1404
expire_timers kernel/time/timer.c:1449 [inline]
__run_timers kernel/time/timer.c:1773 [inline]
__run_timers kernel/time/timer.c:1740 [inline]
run_timer_softirq+0x5f9/0x1500 kernel/time/timer.c:1786
__do_softirq+0x21e/0x950 kernel/softirq.c:292
invoke_softirq kernel/softirq.c:373 [inline]
irq_exit+0x178/0x1a0 kernel/softirq.c:413
exiting_irq arch/x86/include/asm/apic.h:546 [inline]
smp_apic_timer_interrupt+0x141/0x540 arch/x86/kernel/apic/apic.c:1146
apic_timer_interrupt+0xf/0x20 arch/x86/entry/entry_64.S:829

Reported-and-tested-by: syzbot+40d5d2e8a4680952f042@syzkaller.appspotmail.com
Signed-off-by: Qiujun Huang <hqjagain@gmail.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20200404041838.10426-6-hqjagain@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/wireless/ath/ath9k/hif_usb.c | 48 ++++++++++++++++++------
 drivers/net/wireless/ath/ath9k/hif_usb.h |  5 +++
 2 files changed, 42 insertions(+), 11 deletions(-)

diff --git a/drivers/net/wireless/ath/ath9k/hif_usb.c b/drivers/net/wireless/ath/ath9k/hif_usb.c
index 6049d3766c64..4ed21dad6a8e 100644
--- a/drivers/net/wireless/ath/ath9k/hif_usb.c
+++ b/drivers/net/wireless/ath/ath9k/hif_usb.c
@@ -643,9 +643,9 @@ static void ath9k_hif_usb_rx_stream(struct hif_device_usb *hif_dev,
 
 static void ath9k_hif_usb_rx_cb(struct urb *urb)
 {
-	struct sk_buff *skb = (struct sk_buff *) urb->context;
-	struct hif_device_usb *hif_dev =
-		usb_get_intfdata(usb_ifnum_to_if(urb->dev, 0));
+	struct rx_buf *rx_buf = (struct rx_buf *)urb->context;
+	struct hif_device_usb *hif_dev = rx_buf->hif_dev;
+	struct sk_buff *skb = rx_buf->skb;
 	int ret;
 
 	if (!skb)
@@ -685,14 +685,15 @@ static void ath9k_hif_usb_rx_cb(struct urb *urb)
 	return;
 free:
 	kfree_skb(skb);
+	kfree(rx_buf);
 }
 
 static void ath9k_hif_usb_reg_in_cb(struct urb *urb)
 {
-	struct sk_buff *skb = (struct sk_buff *) urb->context;
+	struct rx_buf *rx_buf = (struct rx_buf *)urb->context;
+	struct hif_device_usb *hif_dev = rx_buf->hif_dev;
+	struct sk_buff *skb = rx_buf->skb;
 	struct sk_buff *nskb;
-	struct hif_device_usb *hif_dev =
-		usb_get_intfdata(usb_ifnum_to_if(urb->dev, 0));
 	int ret;
 
 	if (!skb)
@@ -750,6 +751,7 @@ static void ath9k_hif_usb_reg_in_cb(struct urb *urb)
 	return;
 free:
 	kfree_skb(skb);
+	kfree(rx_buf);
 	urb->context = NULL;
 }
 
@@ -795,7 +797,7 @@ static int ath9k_hif_usb_alloc_tx_urbs(struct hif_device_usb *hif_dev)
 	init_usb_anchor(&hif_dev->mgmt_submitted);
 
 	for (i = 0; i < MAX_TX_URB_NUM; i++) {
-		tx_buf = kzalloc(sizeof(struct tx_buf), GFP_KERNEL);
+		tx_buf = kzalloc(sizeof(*tx_buf), GFP_KERNEL);
 		if (!tx_buf)
 			goto err;
 
@@ -832,8 +834,9 @@ static void ath9k_hif_usb_dealloc_rx_urbs(struct hif_device_usb *hif_dev)
 
 static int ath9k_hif_usb_alloc_rx_urbs(struct hif_device_usb *hif_dev)
 {
-	struct urb *urb = NULL;
+	struct rx_buf *rx_buf = NULL;
 	struct sk_buff *skb = NULL;
+	struct urb *urb = NULL;
 	int i, ret;
 
 	init_usb_anchor(&hif_dev->rx_submitted);
@@ -841,6 +844,12 @@ static int ath9k_hif_usb_alloc_rx_urbs(struct hif_device_usb *hif_dev)
 
 	for (i = 0; i < MAX_RX_URB_NUM; i++) {
 
+		rx_buf = kzalloc(sizeof(*rx_buf), GFP_KERNEL);
+		if (!rx_buf) {
+			ret = -ENOMEM;
+			goto err_rxb;
+		}
+
 		/* Allocate URB */
 		urb = usb_alloc_urb(0, GFP_KERNEL);
 		if (urb == NULL) {
@@ -855,11 +864,14 @@ static int ath9k_hif_usb_alloc_rx_urbs(struct hif_device_usb *hif_dev)
 			goto err_skb;
 		}
 
+		rx_buf->hif_dev = hif_dev;
+		rx_buf->skb = skb;
+
 		usb_fill_bulk_urb(urb, hif_dev->udev,
 				  usb_rcvbulkpipe(hif_dev->udev,
 						  USB_WLAN_RX_PIPE),
 				  skb->data, MAX_RX_BUF_SIZE,
-				  ath9k_hif_usb_rx_cb, skb);
+				  ath9k_hif_usb_rx_cb, rx_buf);
 
 		/* Anchor URB */
 		usb_anchor_urb(urb, &hif_dev->rx_submitted);
@@ -885,6 +897,8 @@ static int ath9k_hif_usb_alloc_rx_urbs(struct hif_device_usb *hif_dev)
 err_skb:
 	usb_free_urb(urb);
 err_urb:
+	kfree(rx_buf);
+err_rxb:
 	ath9k_hif_usb_dealloc_rx_urbs(hif_dev);
 	return ret;
 }
@@ -896,14 +910,21 @@ static void ath9k_hif_usb_dealloc_reg_in_urbs(struct hif_device_usb *hif_dev)
 
 static int ath9k_hif_usb_alloc_reg_in_urbs(struct hif_device_usb *hif_dev)
 {
-	struct urb *urb = NULL;
+	struct rx_buf *rx_buf = NULL;
 	struct sk_buff *skb = NULL;
+	struct urb *urb = NULL;
 	int i, ret;
 
 	init_usb_anchor(&hif_dev->reg_in_submitted);
 
 	for (i = 0; i < MAX_REG_IN_URB_NUM; i++) {
 
+		rx_buf = kzalloc(sizeof(*rx_buf), GFP_KERNEL);
+		if (!rx_buf) {
+			ret = -ENOMEM;
+			goto err_rxb;
+		}
+
 		/* Allocate URB */
 		urb = usb_alloc_urb(0, GFP_KERNEL);
 		if (urb == NULL) {
@@ -918,11 +939,14 @@ static int ath9k_hif_usb_alloc_reg_in_urbs(struct hif_device_usb *hif_dev)
 			goto err_skb;
 		}
 
+		rx_buf->hif_dev = hif_dev;
+		rx_buf->skb = skb;
+
 		usb_fill_int_urb(urb, hif_dev->udev,
 				  usb_rcvintpipe(hif_dev->udev,
 						  USB_REG_IN_PIPE),
 				  skb->data, MAX_REG_IN_BUF_SIZE,
-				  ath9k_hif_usb_reg_in_cb, skb, 1);
+				  ath9k_hif_usb_reg_in_cb, rx_buf, 1);
 
 		/* Anchor URB */
 		usb_anchor_urb(urb, &hif_dev->reg_in_submitted);
@@ -948,6 +972,8 @@ static int ath9k_hif_usb_alloc_reg_in_urbs(struct hif_device_usb *hif_dev)
 err_skb:
 	usb_free_urb(urb);
 err_urb:
+	kfree(rx_buf);
+err_rxb:
 	ath9k_hif_usb_dealloc_reg_in_urbs(hif_dev);
 	return ret;
 }
diff --git a/drivers/net/wireless/ath/ath9k/hif_usb.h b/drivers/net/wireless/ath/ath9k/hif_usb.h
index a94e7e1c86e9..5985aa15ca93 100644
--- a/drivers/net/wireless/ath/ath9k/hif_usb.h
+++ b/drivers/net/wireless/ath/ath9k/hif_usb.h
@@ -86,6 +86,11 @@ struct tx_buf {
 	struct list_head list;
 };
 
+struct rx_buf {
+	struct sk_buff *skb;
+	struct hif_device_usb *hif_dev;
+};
+
 #define HIF_USB_TX_STOP  BIT(0)
 #define HIF_USB_TX_FLUSH BIT(1)
 
-- 
2.25.1

[PATCH AUTOSEL 4.19 033/106] brcmfmac: fix wrong location to get firmware feature

[Sasha Levin]

From: Jaehoon Chung <jh80.chung@samsung.com>

[ Upstream commit c57673852062428cdeabdd6501ac8b8e4c302067 ]

sup_wpa feature is getting after setting feature_disable flag.
If firmware is supported sup_wpa feature,  it's always enabled
regardless of feature_disable flag.

Fixes: b8a64f0e96c2 ("brcmfmac: support 4-way handshake offloading for WPA/WPA2-PSK")
Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20200330052528.10503-1-jh80.chung@samsung.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/wireless/broadcom/brcm80211/brcmfmac/feature.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/feature.c b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/feature.c
index 4c5a3995dc35..d7f41caa0b0b 100644
--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/feature.c
+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/feature.c
@@ -281,13 +281,14 @@ void brcmf_feat_attach(struct brcmf_pub *drvr)
 	if (!err)
 		ifp->drvr->feat_flags |= BIT(BRCMF_FEAT_SCAN_RANDOM_MAC);
 
+	brcmf_feat_iovar_int_get(ifp, BRCMF_FEAT_FWSUP, "sup_wpa");
+
 	if (drvr->settings->feature_disable) {
 		brcmf_dbg(INFO, "Features: 0x%02x, disable: 0x%02x\n",
 			  ifp->drvr->feat_flags,
 			  drvr->settings->feature_disable);
 		ifp->drvr->feat_flags &= ~drvr->settings->feature_disable;
 	}
-	brcmf_feat_iovar_int_get(ifp, BRCMF_FEAT_FWSUP, "sup_wpa");
 
 	brcmf_feat_firmware_overrides(drvr);
 
-- 
2.25.1

[PATCH AUTOSEL 4.19 034/106] tools api fs: Make xxx__mountpoint() more scalable

[Sasha Levin]

From: Stephane Eranian <eranian@google.com>

[ Upstream commit c6fddb28bad26e5472cb7acf7b04cd5126f1a4ab ]

The xxx_mountpoint() interface provided by fs.c finds mount points for
common pseudo filesystems. The first time xxx_mountpoint() is invoked,
it scans the mount table (/proc/mounts) looking for a match. If found,
it is cached. The price to scan /proc/mounts is paid once if the mount
is found.

When the mount point is not found, subsequent calls to xxx_mountpoint()
scan /proc/mounts over and over again.  There is no caching.

This causes a scaling issue in perf record with hugeltbfs__mountpoint().
The function is called for each process found in
synthesize__mmap_events().  If the machine has thousands of processes
and if the /proc/mounts has many entries this could cause major overhead
in perf record. We have observed multi-second slowdowns on some
configurations.

As an example on a laptop:

Before:

  $ sudo umount /dev/hugepages
  $ strace -e trace=openat -o /tmp/tt perf record -a ls
  $ fgrep mounts /tmp/tt
  285

After:

  $ sudo umount /dev/hugepages
  $ strace -e trace=openat -o /tmp/tt perf record -a ls
  $ fgrep mounts /tmp/tt
  1

One could argue that the non-caching in case the moint point is not
found is intentional. That way subsequent calls may discover a moint
point if the sysadmin mounts the filesystem. But the same argument could
be made against caching the mount point. It could be unmounted causing
errors.  It all depends on the intent of the interface. This patch
assumes it is expected to scan /proc/mounts once. The patch documents
the caching behavior in the fs.h header file.

An alternative would be to just fix perf record. But it would solve the
problem with hugetlbs__mountpoint() but there could be similar issues
(possibly down the line) with other xxx_mountpoint() calls in perf or
other tools.

Signed-off-by: Stephane Eranian <eranian@google.com>
Reviewed-by: Ian Rogers <irogers@google.com>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andrey Zhizhikin <andrey.z@gmail.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Kefeng Wang <wangkefeng.wang@huawei.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Petr Mladek <pmladek@suse.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lore.kernel.org/lkml/20200402154357.107873-3-irogers@google.com
Signed-off-by: Ian Rogers <irogers@google.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 tools/lib/api/fs/fs.c | 17 +++++++++++++++++
 tools/lib/api/fs/fs.h | 12 ++++++++++++
 2 files changed, 29 insertions(+)

diff --git a/tools/lib/api/fs/fs.c b/tools/lib/api/fs/fs.c
index bd021a0eeef8..4cc69675c2a9 100644
--- a/tools/lib/api/fs/fs.c
+++ b/tools/lib/api/fs/fs.c
@@ -90,6 +90,7 @@ struct fs {
 	const char * const	*mounts;
 	char			 path[PATH_MAX];
 	bool			 found;
+	bool			 checked;
 	long			 magic;
 };
 
@@ -111,31 +112,37 @@ static struct fs fs__entries[] = {
 		.name	= "sysfs",
 		.mounts	= sysfs__fs_known_mountpoints,
 		.magic	= SYSFS_MAGIC,
+		.checked = false,
 	},
 	[FS__PROCFS] = {
 		.name	= "proc",
 		.mounts	= procfs__known_mountpoints,
 		.magic	= PROC_SUPER_MAGIC,
+		.checked = false,
 	},
 	[FS__DEBUGFS] = {
 		.name	= "debugfs",
 		.mounts	= debugfs__known_mountpoints,
 		.magic	= DEBUGFS_MAGIC,
+		.checked = false,
 	},
 	[FS__TRACEFS] = {
 		.name	= "tracefs",
 		.mounts	= tracefs__known_mountpoints,
 		.magic	= TRACEFS_MAGIC,
+		.checked = false,
 	},
 	[FS__HUGETLBFS] = {
 		.name	= "hugetlbfs",
 		.mounts = hugetlbfs__known_mountpoints,
 		.magic	= HUGETLBFS_MAGIC,
+		.checked = false,
 	},
 	[FS__BPF_FS] = {
 		.name	= "bpf",
 		.mounts = bpf_fs__known_mountpoints,
 		.magic	= BPF_FS_MAGIC,
+		.checked = false,
 	},
 };
 
@@ -158,6 +165,7 @@ static bool fs__read_mounts(struct fs *fs)
 	}
 
 	fclose(fp);
+	fs->checked = true;
 	return fs->found = found;
 }
 
@@ -220,6 +228,7 @@ static bool fs__env_override(struct fs *fs)
 		return false;
 
 	fs->found = true;
+	fs->checked = true;
 	strncpy(fs->path, override_path, sizeof(fs->path) - 1);
 	fs->path[sizeof(fs->path) - 1] = '\0';
 	return true;
@@ -246,6 +255,14 @@ static const char *fs__mountpoint(int idx)
 	if (fs->found)
 		return (const char *)fs->path;
 
+	/* the mount point was already checked for the mount point
+	 * but and did not exist, so return NULL to avoid scanning again.
+	 * This makes the found and not found paths cost equivalent
+	 * in case of multiple calls.
+	 */
+	if (fs->checked)
+		return NULL;
+
 	return fs__get_mountpoint(fs);
 }
 
diff --git a/tools/lib/api/fs/fs.h b/tools/lib/api/fs/fs.h
index 92d03b8396b1..3b70003e7cfb 100644
--- a/tools/lib/api/fs/fs.h
+++ b/tools/lib/api/fs/fs.h
@@ -18,6 +18,18 @@
 	const char *name##__mount(void);	\
 	bool name##__configured(void);		\
 
+/*
+ * The xxxx__mountpoint() entry points find the first match mount point for each
+ * filesystems listed below, where xxxx is the filesystem type.
+ *
+ * The interface is as follows:
+ *
+ * - If a mount point is found on first call, it is cached and used for all
+ *   subsequent calls.
+ *
+ * - If a mount point is not found, NULL is returned on first call and all
+ *   subsequent calls.
+ */
 FS(sysfs)
 FS(procfs)
 FS(debugfs)
-- 
2.25.1

[PATCH AUTOSEL 4.19 035/106] e1000: Distribute switch variables for initialization

[Sasha Levin]

From: Kees Cook <keescook@chromium.org>

[ Upstream commit a34c7f5156654ebaf7eaace102938be7ff7036cb ]

Variables declared in a switch statement before any case statements
cannot be automatically initialized with compiler instrumentation (as
they are not part of any execution flow). With GCC's proposed automatic
stack variable initialization feature, this triggers a warning (and they
don't get initialized). Clang's automatic stack variable initialization
(via CONFIG_INIT_STACK_ALL=y) doesn't throw a warning, but it also
doesn't initialize such variables[1]. Note that these warnings (or silent
skipping) happen before the dead-store elimination optimization phase,
so even when the automatic initializations are later elided in favor of
direct initializations, the warnings remain.

To avoid these problems, move such variables into the "case" where
they're used or lift them up into the main function body.

drivers/net/ethernet/intel/e1000/e1000_main.c: In function ‘e1000_xmit_frame’:
drivers/net/ethernet/intel/e1000/e1000_main.c:3143:18: warning: statement will never be executed [-Wswitch-unreachable]
 3143 |     unsigned int pull_size;
      |                  ^~~~~~~~~

[1] https://bugs.llvm.org/show_bug.cgi?id=44916

Signed-off-by: Kees Cook <keescook@chromium.org>
Tested-by: Aaron Brown <aaron.f.brown@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/intel/e1000/e1000_main.c | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

diff --git a/drivers/net/ethernet/intel/e1000/e1000_main.c b/drivers/net/ethernet/intel/e1000/e1000_main.c
index 2110d5f2da19..47b867c64b14 100644
--- a/drivers/net/ethernet/intel/e1000/e1000_main.c
+++ b/drivers/net/ethernet/intel/e1000/e1000_main.c
@@ -3144,8 +3144,9 @@ static netdev_tx_t e1000_xmit_frame(struct sk_buff *skb,
 		hdr_len = skb_transport_offset(skb) + tcp_hdrlen(skb);
 		if (skb->data_len && hdr_len == len) {
 			switch (hw->mac_type) {
+			case e1000_82544: {
 				unsigned int pull_size;
-			case e1000_82544:
+
 				/* Make sure we have room to chop off 4 bytes,
 				 * and that the end alignment will work out to
 				 * this hardware's requirements
@@ -3166,6 +3167,7 @@ static netdev_tx_t e1000_xmit_frame(struct sk_buff *skb,
 				}
 				len = skb_headlen(skb);
 				break;
+			}
 			default:
 				/* do nothing */
 				break;
-- 
2.25.1

[Intel-wired-lan] [PATCH AUTOSEL 4.19 035/106] e1000: Distribute switch variables for initialization

[Sasha Levin]

From: Kees Cook <keescook@chromium.org>

[ Upstream commit a34c7f5156654ebaf7eaace102938be7ff7036cb ]

Variables declared in a switch statement before any case statements
cannot be automatically initialized with compiler instrumentation (as
they are not part of any execution flow). With GCC's proposed automatic
stack variable initialization feature, this triggers a warning (and they
don't get initialized). Clang's automatic stack variable initialization
(via CONFIG_INIT_STACK_ALL=y) doesn't throw a warning, but it also
doesn't initialize such variables[1]. Note that these warnings (or silent
skipping) happen before the dead-store elimination optimization phase,
so even when the automatic initializations are later elided in favor of
direct initializations, the warnings remain.

To avoid these problems, move such variables into the "case" where
they're used or lift them up into the main function body.

drivers/net/ethernet/intel/e1000/e1000_main.c: In function ?e1000_xmit_frame?:
drivers/net/ethernet/intel/e1000/e1000_main.c:3143:18: warning: statement will never be executed [-Wswitch-unreachable]
 3143 |     unsigned int pull_size;
      |                  ^~~~~~~~~

[1] https://bugs.llvm.org/show_bug.cgi?id=44916

Signed-off-by: Kees Cook <keescook@chromium.org>
Tested-by: Aaron Brown <aaron.f.brown@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/intel/e1000/e1000_main.c | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

diff --git a/drivers/net/ethernet/intel/e1000/e1000_main.c b/drivers/net/ethernet/intel/e1000/e1000_main.c
index 2110d5f2da19..47b867c64b14 100644
--- a/drivers/net/ethernet/intel/e1000/e1000_main.c
+++ b/drivers/net/ethernet/intel/e1000/e1000_main.c
@@ -3144,8 +3144,9 @@ static netdev_tx_t e1000_xmit_frame(struct sk_buff *skb,
 		hdr_len = skb_transport_offset(skb) + tcp_hdrlen(skb);
 		if (skb->data_len && hdr_len == len) {
 			switch (hw->mac_type) {
+			case e1000_82544: {
 				unsigned int pull_size;
-			case e1000_82544:
+
 				/* Make sure we have room to chop off 4 bytes,
 				 * and that the end alignment will work out to
 				 * this hardware's requirements
@@ -3166,6 +3167,7 @@ static netdev_tx_t e1000_xmit_frame(struct sk_buff *skb,
 				}
 				len = skb_headlen(skb);
 				break;
+			}
 			default:
 				/* do nothing */
 				break;
-- 
2.25.1

[PATCH AUTOSEL 4.19 036/106] dt-bindings: display: mediatek: control dpi pins mode to avoid leakage

[Sasha Levin]

From: Jitao Shi <jitao.shi@mediatek.com>

[ Upstream commit b0ff9b590733079f7f9453e5976a9dd2630949e3 ]

Add property "pinctrl-names" to swap pin mode between gpio and dpi mode.
Set the dpi pins to gpio mode and output-low to avoid leakage current
when dpi disabled.

Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Jitao Shi <jitao.shi@mediatek.com>
Signed-off-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 .../devicetree/bindings/display/mediatek/mediatek,dpi.txt   | 6 ++++++
 1 file changed, 6 insertions(+)

diff --git a/Documentation/devicetree/bindings/display/mediatek/mediatek,dpi.txt b/Documentation/devicetree/bindings/display/mediatek/mediatek,dpi.txt
index b6a7e7397b8b..b944fe067188 100644
--- a/Documentation/devicetree/bindings/display/mediatek/mediatek,dpi.txt
+++ b/Documentation/devicetree/bindings/display/mediatek/mediatek,dpi.txt
@@ -16,6 +16,9 @@ Required properties:
   Documentation/devicetree/bindings/graph.txt. This port should be connected
   to the input port of an attached HDMI or LVDS encoder chip.
 
+Optional properties:
+- pinctrl-names: Contain "default" and "sleep".
+
 Example:
 
 dpi0: dpi@1401d000 {
@@ -26,6 +29,9 @@ dpi0: dpi@1401d000 {
 		 <&mmsys CLK_MM_DPI_ENGINE>,
 		 <&apmixedsys CLK_APMIXED_TVDPLL>;
 	clock-names = "pixel", "engine", "pll";
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&dpi_pin_func>;
+	pinctrl-1 = <&dpi_pin_idle>;
 
 	port {
 		dpi0_out: endpoint {
-- 
2.25.1

[PATCH AUTOSEL 4.19 036/106] dt-bindings: display: mediatek: control dpi pins mode to avoid leakage

[Sasha Levin]

From: Jitao Shi <jitao.shi@mediatek.com>

[ Upstream commit b0ff9b590733079f7f9453e5976a9dd2630949e3 ]

Add property "pinctrl-names" to swap pin mode between gpio and dpi mode.
Set the dpi pins to gpio mode and output-low to avoid leakage current
when dpi disabled.

Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Jitao Shi <jitao.shi@mediatek.com>
Signed-off-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 .../devicetree/bindings/display/mediatek/mediatek,dpi.txt   | 6 ++++++
 1 file changed, 6 insertions(+)

diff --git a/Documentation/devicetree/bindings/display/mediatek/mediatek,dpi.txt b/Documentation/devicetree/bindings/display/mediatek/mediatek,dpi.txt
index b6a7e7397b8b..b944fe067188 100644
--- a/Documentation/devicetree/bindings/display/mediatek/mediatek,dpi.txt
+++ b/Documentation/devicetree/bindings/display/mediatek/mediatek,dpi.txt
@@ -16,6 +16,9 @@ Required properties:
   Documentation/devicetree/bindings/graph.txt. This port should be connected
   to the input port of an attached HDMI or LVDS encoder chip.
 
+Optional properties:
+- pinctrl-names: Contain "default" and "sleep".
+
 Example:
 
 dpi0: dpi@1401d000 {
@@ -26,6 +29,9 @@ dpi0: dpi@1401d000 {
 		 <&mmsys CLK_MM_DPI_ENGINE>,
 		 <&apmixedsys CLK_APMIXED_TVDPLL>;
 	clock-names = "pixel", "engine", "pll";
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&dpi_pin_func>;
+	pinctrl-1 = <&dpi_pin_idle>;
 
 	port {
 		dpi0_out: endpoint {
-- 
2.25.1


_______________________________________________
Linux-mediatek mailing list
Linux-mediatek@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-mediatek

[PATCH AUTOSEL 4.19 036/106] dt-bindings: display: mediatek: control dpi pins mode to avoid leakage

[Sasha Levin]

From: Jitao Shi <jitao.shi@mediatek.com>

[ Upstream commit b0ff9b590733079f7f9453e5976a9dd2630949e3 ]

Add property "pinctrl-names" to swap pin mode between gpio and dpi mode.
Set the dpi pins to gpio mode and output-low to avoid leakage current
when dpi disabled.

Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Jitao Shi <jitao.shi@mediatek.com>
Signed-off-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 .../devicetree/bindings/display/mediatek/mediatek,dpi.txt   | 6 ++++++
 1 file changed, 6 insertions(+)

diff --git a/Documentation/devicetree/bindings/display/mediatek/mediatek,dpi.txt b/Documentation/devicetree/bindings/display/mediatek/mediatek,dpi.txt
index b6a7e7397b8b..b944fe067188 100644
--- a/Documentation/devicetree/bindings/display/mediatek/mediatek,dpi.txt
+++ b/Documentation/devicetree/bindings/display/mediatek/mediatek,dpi.txt
@@ -16,6 +16,9 @@ Required properties:
   Documentation/devicetree/bindings/graph.txt. This port should be connected
   to the input port of an attached HDMI or LVDS encoder chip.
 
+Optional properties:
+- pinctrl-names: Contain "default" and "sleep".
+
 Example:
 
 dpi0: dpi@1401d000 {
@@ -26,6 +29,9 @@ dpi0: dpi@1401d000 {
 		 <&mmsys CLK_MM_DPI_ENGINE>,
 		 <&apmixedsys CLK_APMIXED_TVDPLL>;
 	clock-names = "pixel", "engine", "pll";
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&dpi_pin_func>;
+	pinctrl-1 = <&dpi_pin_idle>;
 
 	port {
 		dpi0_out: endpoint {
-- 
2.25.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH AUTOSEL 4.19 036/106] dt-bindings: display: mediatek: control dpi pins mode to avoid leakage

[Sasha Levin]

From: Jitao Shi <jitao.shi@mediatek.com>

[ Upstream commit b0ff9b590733079f7f9453e5976a9dd2630949e3 ]

Add property "pinctrl-names" to swap pin mode between gpio and dpi mode.
Set the dpi pins to gpio mode and output-low to avoid leakage current
when dpi disabled.

Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Jitao Shi <jitao.shi@mediatek.com>
Signed-off-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 .../devicetree/bindings/display/mediatek/mediatek,dpi.txt   | 6 ++++++
 1 file changed, 6 insertions(+)

diff --git a/Documentation/devicetree/bindings/display/mediatek/mediatek,dpi.txt b/Documentation/devicetree/bindings/display/mediatek/mediatek,dpi.txt
index b6a7e7397b8b..b944fe067188 100644
--- a/Documentation/devicetree/bindings/display/mediatek/mediatek,dpi.txt
+++ b/Documentation/devicetree/bindings/display/mediatek/mediatek,dpi.txt
@@ -16,6 +16,9 @@ Required properties:
   Documentation/devicetree/bindings/graph.txt. This port should be connected
   to the input port of an attached HDMI or LVDS encoder chip.
 
+Optional properties:
+- pinctrl-names: Contain "default" and "sleep".
+
 Example:
 
 dpi0: dpi@1401d000 {
@@ -26,6 +29,9 @@ dpi0: dpi@1401d000 {
 		 <&mmsys CLK_MM_DPI_ENGINE>,
 		 <&apmixedsys CLK_APMIXED_TVDPLL>;
 	clock-names = "pixel", "engine", "pll";
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&dpi_pin_func>;
+	pinctrl-1 = <&dpi_pin_idle>;
 
 	port {
 		dpi0_out: endpoint {
-- 
2.25.1

_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel

[PATCH AUTOSEL 4.19 037/106] audit: fix a net reference leak in audit_send_reply()

[Sasha Levin]

From: Paul Moore <paul@paul-moore.com>

[ Upstream commit a48b284b403a4a073d8beb72d2bb33e54df67fb6 ]

If audit_send_reply() fails when trying to create a new thread to
send the reply it also fails to cleanup properly, leaking a reference
to a net structure.  This patch fixes the error path and makes a
handful of other cleanups that came up while fixing the code.

Reported-by: teroincn@gmail.com
Reviewed-by: Richard Guy Briggs <rgb@redhat.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 kernel/audit.c | 50 +++++++++++++++++++++++++++++---------------------
 1 file changed, 29 insertions(+), 21 deletions(-)

diff --git a/kernel/audit.c b/kernel/audit.c
index 7afec5f43c63..20c78480d632 100644
--- a/kernel/audit.c
+++ b/kernel/audit.c
@@ -937,19 +937,30 @@ struct sk_buff *audit_make_reply(int seq, int type, int done,
 	return NULL;
 }
 
+static void audit_free_reply(struct audit_reply *reply)
+{
+	if (!reply)
+		return;
+
+	if (reply->skb)
+		kfree_skb(reply->skb);
+	if (reply->net)
+		put_net(reply->net);
+	kfree(reply);
+}
+
 static int audit_send_reply_thread(void *arg)
 {
 	struct audit_reply *reply = (struct audit_reply *)arg;
-	struct sock *sk = audit_get_sk(reply->net);
 
 	audit_ctl_lock();
 	audit_ctl_unlock();
 
 	/* Ignore failure. It'll only happen if the sender goes away,
 	   because our timeout is set to infinite. */
-	netlink_unicast(sk, reply->skb, reply->portid, 0);
-	put_net(reply->net);
-	kfree(reply);
+	netlink_unicast(audit_get_sk(reply->net), reply->skb, reply->portid, 0);
+	reply->skb = NULL;
+	audit_free_reply(reply);
 	return 0;
 }
 
@@ -963,35 +974,32 @@ static int audit_send_reply_thread(void *arg)
  * @payload: payload data
  * @size: payload size
  *
- * Allocates an skb, builds the netlink message, and sends it to the port id.
- * No failure notifications.
+ * Allocates a skb, builds the netlink message, and sends it to the port id.
  */
 static void audit_send_reply(struct sk_buff *request_skb, int seq, int type, int done,
 			     int multi, const void *payload, int size)
 {
-	struct net *net = sock_net(NETLINK_CB(request_skb).sk);
-	struct sk_buff *skb;
 	struct task_struct *tsk;
-	struct audit_reply *reply = kmalloc(sizeof(struct audit_reply),
-					    GFP_KERNEL);
+	struct audit_reply *reply;
 
+	reply = kzalloc(sizeof(*reply), GFP_KERNEL);
 	if (!reply)
 		return;
 
-	skb = audit_make_reply(seq, type, done, multi, payload, size);
-	if (!skb)
-		goto out;
-
-	reply->net = get_net(net);
+	reply->skb = audit_make_reply(seq, type, done, multi, payload, size);
+	if (!reply->skb)
+		goto err;
+	reply->net = get_net(sock_net(NETLINK_CB(request_skb).sk));
 	reply->portid = NETLINK_CB(request_skb).portid;
-	reply->skb = skb;
 
 	tsk = kthread_run(audit_send_reply_thread, reply, "audit_send_reply");
-	if (!IS_ERR(tsk))
-		return;
-	kfree_skb(skb);
-out:
-	kfree(reply);
+	if (IS_ERR(tsk))
+		goto err;
+
+	return;
+
+err:
+	audit_free_reply(reply);
 }
 
 /*
-- 
2.25.1

[PATCH AUTOSEL 4.19 037/106] audit: fix a net reference leak in audit_send_reply()

[Sasha Levin]

From: Paul Moore <paul@paul-moore.com>

[ Upstream commit a48b284b403a4a073d8beb72d2bb33e54df67fb6 ]

If audit_send_reply() fails when trying to create a new thread to
send the reply it also fails to cleanup properly, leaking a reference
to a net structure.  This patch fixes the error path and makes a
handful of other cleanups that came up while fixing the code.

Reported-by: teroincn@gmail.com
Reviewed-by: Richard Guy Briggs <rgb@redhat.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 kernel/audit.c | 50 +++++++++++++++++++++++++++++---------------------
 1 file changed, 29 insertions(+), 21 deletions(-)

diff --git a/kernel/audit.c b/kernel/audit.c
index 7afec5f43c63..20c78480d632 100644
--- a/kernel/audit.c
+++ b/kernel/audit.c
@@ -937,19 +937,30 @@ struct sk_buff *audit_make_reply(int seq, int type, int done,
 	return NULL;
 }
 
+static void audit_free_reply(struct audit_reply *reply)
+{
+	if (!reply)
+		return;
+
+	if (reply->skb)
+		kfree_skb(reply->skb);
+	if (reply->net)
+		put_net(reply->net);
+	kfree(reply);
+}
+
 static int audit_send_reply_thread(void *arg)
 {
 	struct audit_reply *reply = (struct audit_reply *)arg;
-	struct sock *sk = audit_get_sk(reply->net);
 
 	audit_ctl_lock();
 	audit_ctl_unlock();
 
 	/* Ignore failure. It'll only happen if the sender goes away,
 	   because our timeout is set to infinite. */
-	netlink_unicast(sk, reply->skb, reply->portid, 0);
-	put_net(reply->net);
-	kfree(reply);
+	netlink_unicast(audit_get_sk(reply->net), reply->skb, reply->portid, 0);
+	reply->skb = NULL;
+	audit_free_reply(reply);
 	return 0;
 }
 
@@ -963,35 +974,32 @@ static int audit_send_reply_thread(void *arg)
  * @payload: payload data
  * @size: payload size
  *
- * Allocates an skb, builds the netlink message, and sends it to the port id.
- * No failure notifications.
+ * Allocates a skb, builds the netlink message, and sends it to the port id.
  */
 static void audit_send_reply(struct sk_buff *request_skb, int seq, int type, int done,
 			     int multi, const void *payload, int size)
 {
-	struct net *net = sock_net(NETLINK_CB(request_skb).sk);
-	struct sk_buff *skb;
 	struct task_struct *tsk;
-	struct audit_reply *reply = kmalloc(sizeof(struct audit_reply),
-					    GFP_KERNEL);
+	struct audit_reply *reply;
 
+	reply = kzalloc(sizeof(*reply), GFP_KERNEL);
 	if (!reply)
 		return;
 
-	skb = audit_make_reply(seq, type, done, multi, payload, size);
-	if (!skb)
-		goto out;
-
-	reply->net = get_net(net);
+	reply->skb = audit_make_reply(seq, type, done, multi, payload, size);
+	if (!reply->skb)
+		goto err;
+	reply->net = get_net(sock_net(NETLINK_CB(request_skb).sk));
 	reply->portid = NETLINK_CB(request_skb).portid;
-	reply->skb = skb;
 
 	tsk = kthread_run(audit_send_reply_thread, reply, "audit_send_reply");
-	if (!IS_ERR(tsk))
-		return;
-	kfree_skb(skb);
-out:
-	kfree(reply);
+	if (IS_ERR(tsk))
+		goto err;
+
+	return;
+
+err:
+	audit_free_reply(reply);
 }
 
 /*
-- 
2.25.1


--
Linux-audit mailing list
Linux-audit@redhat.com
https://www.redhat.com/mailman/listinfo/linux-audit

[PATCH AUTOSEL 4.19 038/106] media: dvb: return -EREMOTEIO on i2c transfer failure.

[Sasha Levin]

From: Colin Ian King <colin.king@canonical.com>

[ Upstream commit 96f3a9392799dd0f6472648a7366622ffd0989f3 ]

Currently when i2c transfers fail the error return -EREMOTEIO
is assigned to err but then later overwritten when the tuner
attach call is made.  Fix this by returning early with the
error return code -EREMOTEIO on i2c transfer failure errors.

If the transfer fails, an uninitialized value will be read from b2.

Addresses-Coverity: ("Unused value")

Fixes: fbfee8684ff2 ("V4L/DVB (5651): Dibusb-mb: convert pll handling to properly use dvb-pll")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/media/usb/dvb-usb/dibusb-mb.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/media/usb/dvb-usb/dibusb-mb.c b/drivers/media/usb/dvb-usb/dibusb-mb.c
index 408920577716..94f59c7765dc 100644
--- a/drivers/media/usb/dvb-usb/dibusb-mb.c
+++ b/drivers/media/usb/dvb-usb/dibusb-mb.c
@@ -84,7 +84,7 @@ static int dibusb_tuner_probe_and_attach(struct dvb_usb_adapter *adap)
 
 	if (i2c_transfer(&adap->dev->i2c_adap, msg, 2) != 2) {
 		err("tuner i2c write failed.");
-		ret = -EREMOTEIO;
+		return -EREMOTEIO;
 	}
 
 	if (adap->fe_adap[0].fe->ops.i2c_gate_ctrl)
-- 
2.25.1

[PATCH AUTOSEL 4.19 039/106] media: platform: fcp: Set appropriate DMA parameters

[Sasha Levin]

From: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>

[ Upstream commit dd844fb8e50b12e65bbdc5746c9876c6735500df ]

Enabling CONFIG_DMA_API_DEBUG=y and CONFIG_DMA_API_DEBUG_SG=y will
enable extra validation on DMA operations ensuring that the size
restraints are met.

When using the FCP in conjunction with the VSP1/DU, and display frames,
the size of the DMA operations is larger than the default maximum
segment size reported by the DMA core (64K). With the DMA debug enabled,
this produces a warning such as the following:

"DMA-API: rcar-fcp fea27000.fcp: mapping sg segment longer than device
claims to support [len=3145728] [max=65536]"

We have no specific limitation on the segment size which isn't already
handled by the VSP1/DU which actually handles the DMA allcoations and
buffer management, so define a maximum segment size of up to 4GB (a 32
bit mask).

Reported-by: Geert Uytterhoeven <geert+renesas@glider.be>
Fixes: 7b49235e83b2 ("[media] v4l: Add Renesas R-Car FCP driver")
Signed-off-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Tested-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/media/platform/rcar-fcp.c | 5 +++++
 1 file changed, 5 insertions(+)

diff --git a/drivers/media/platform/rcar-fcp.c b/drivers/media/platform/rcar-fcp.c
index 43c78620c9d8..5c6b00737fe7 100644
--- a/drivers/media/platform/rcar-fcp.c
+++ b/drivers/media/platform/rcar-fcp.c
@@ -8,6 +8,7 @@
  */
 
 #include <linux/device.h>
+#include <linux/dma-mapping.h>
 #include <linux/list.h>
 #include <linux/module.h>
 #include <linux/mod_devicetable.h>
@@ -21,6 +22,7 @@
 struct rcar_fcp_device {
 	struct list_head list;
 	struct device *dev;
+	struct device_dma_parameters dma_parms;
 };
 
 static LIST_HEAD(fcp_devices);
@@ -136,6 +138,9 @@ static int rcar_fcp_probe(struct platform_device *pdev)
 
 	fcp->dev = &pdev->dev;
 
+	fcp->dev->dma_parms = &fcp->dma_parms;
+	dma_set_max_seg_size(fcp->dev, DMA_BIT_MASK(32));
+
 	pm_runtime_enable(&pdev->dev);
 
 	mutex_lock(&fcp_lock);
-- 
2.25.1

[PATCH AUTOSEL 4.19 040/106] MIPS: Make sparse_init() using top-down allocation

[Sasha Levin]

From: Tiezhu Yang <yangtiezhu@loongson.cn>

[ Upstream commit 269b3a9ac538c4ae87f84be640b9fa89914a2489 ]

In the current code, if CONFIG_SWIOTLB is set, when failed to get IO TLB
memory from the low pages by plat_swiotlb_setup(), it may lead to the boot
process failed with kernel panic.

(1) On the Loongson and SiByte platform
arch/mips/loongson64/dma.c
arch/mips/sibyte/common/dma.c
void __init plat_swiotlb_setup(void)
{
	swiotlb_init(1);
}

kernel/dma/swiotlb.c
void  __init
swiotlb_init(int verbose)
{
...
	vstart = memblock_alloc_low(PAGE_ALIGN(bytes), PAGE_SIZE);
	if (vstart && !swiotlb_init_with_tbl(vstart, io_tlb_nslabs, verbose))
		return;
...
	pr_warn("Cannot allocate buffer");
	no_iotlb_memory = true;
}

phys_addr_t swiotlb_tbl_map_single()
{
...
	if (no_iotlb_memory)
		panic("Can not allocate SWIOTLB buffer earlier ...");
...
}

(2) On the Cavium OCTEON platform
arch/mips/cavium-octeon/dma-octeon.c
void __init plat_swiotlb_setup(void)
{
...
	octeon_swiotlb = memblock_alloc_low(swiotlbsize, PAGE_SIZE);
	if (!octeon_swiotlb)
		panic("%s: Failed to allocate %zu bytes align=%lx\n",
		      __func__, swiotlbsize, PAGE_SIZE);
...
}

Because IO_TLB_DEFAULT_SIZE is 64M, if the rest size of low memory is less
than 64M when call plat_swiotlb_setup(), we can easily reproduce the panic
case.

In order to reduce the possibility of kernel panic when failed to get IO
TLB memory under CONFIG_SWIOTLB, it is better to allocate low memory as
small as possible before plat_swiotlb_setup(), so make sparse_init() using
top-down allocation.

Reported-by: Juxin Gao <gaojuxin@loongson.cn>
Co-developed-by: Juxin Gao <gaojuxin@loongson.cn>
Signed-off-by: Juxin Gao <gaojuxin@loongson.cn>
Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/mips/kernel/setup.c | 10 ++++++++++
 1 file changed, 10 insertions(+)

diff --git a/arch/mips/kernel/setup.c b/arch/mips/kernel/setup.c
index e87c98b8a72c..2c2480be3f36 100644
--- a/arch/mips/kernel/setup.c
+++ b/arch/mips/kernel/setup.c
@@ -933,7 +933,17 @@ static void __init arch_mem_init(char **cmdline_p)
 				BOOTMEM_DEFAULT);
 #endif
 	device_tree_init();
+
+	/*
+	 * In order to reduce the possibility of kernel panic when failed to
+	 * get IO TLB memory under CONFIG_SWIOTLB, it is better to allocate
+	 * low memory as small as possible before plat_swiotlb_setup(), so
+	 * make sparse_init() using top-down allocation.
+	 */
+	memblock_set_bottom_up(false);
 	sparse_init();
+	memblock_set_bottom_up(true);
+
 	plat_swiotlb_setup();
 
 	dma_contiguous_reserve(PFN_PHYS(max_low_pfn));
-- 
2.25.1

[PATCH AUTOSEL 4.19 041/106] Bluetooth: btbcm: Add 2 missing models to subver tables

[Sasha Levin]

From: Hans de Goede <hdegoede@redhat.com>

[ Upstream commit c03ee9af4e07112bd3fc688daca9e654f41eca93 ]

Currently the bcm_uart_subver_ and bcm_usb_subver_table-s lack entries
for the BCM4324B5 and BCM20703A1 chipsets. This makes the code use just
"BCM" as prefix for the filename to pass to request-firmware, making it
harder for users to figure out which firmware they need. This especially
is problematic with the UART attached BCM4324B5 where this leads to the
filename being just "BCM.hcd".

Add the 2 missing devices to subver tables. This has been tested on:

1. A Dell XPS15 9550 where this makes btbcm.c try to load
"BCM20703A1-0a5c-6410.hcd" before it tries to load "BCM-0a5c-6410.hcd".

2. A Thinkpad 8 where this makes btbcm.c try to load
"BCM4324B5.hcd" before it tries to load "BCM.hcd"

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/bluetooth/btbcm.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/drivers/bluetooth/btbcm.c b/drivers/bluetooth/btbcm.c
index e3e4d929e74f..ff6203c331ff 100644
--- a/drivers/bluetooth/btbcm.c
+++ b/drivers/bluetooth/btbcm.c
@@ -324,6 +324,7 @@ static const struct bcm_subver_table bcm_uart_subver_table[] = {
 	{ 0x4103, "BCM4330B1"	},	/* 002.001.003 */
 	{ 0x410e, "BCM43341B0"	},	/* 002.001.014 */
 	{ 0x4406, "BCM4324B3"	},	/* 002.004.006 */
+	{ 0x4606, "BCM4324B5"	},	/* 002.006.006 */
 	{ 0x6109, "BCM4335C0"	},	/* 003.001.009 */
 	{ 0x610c, "BCM4354"	},	/* 003.001.012 */
 	{ 0x2122, "BCM4343A0"	},	/* 001.001.034 */
@@ -334,6 +335,7 @@ static const struct bcm_subver_table bcm_uart_subver_table[] = {
 };
 
 static const struct bcm_subver_table bcm_usb_subver_table[] = {
+	{ 0x2105, "BCM20703A1"	},	/* 001.001.005 */
 	{ 0x210b, "BCM43142A0"	},	/* 001.001.011 */
 	{ 0x2112, "BCM4314A0"	},	/* 001.001.018 */
 	{ 0x2118, "BCM20702A0"	},	/* 001.001.024 */
-- 
2.25.1

[PATCH AUTOSEL 4.19 042/106] audit: fix a net reference leak in audit_list_rules_send()

[Sasha Levin]

From: Paul Moore <paul@paul-moore.com>

[ Upstream commit 3054d06719079388a543de6adb812638675ad8f5 ]

If audit_list_rules_send() fails when trying to create a new thread
to send the rules it also fails to cleanup properly, leaking a
reference to a net structure.  This patch fixes the error patch and
renames audit_send_list() to audit_send_list_thread() to better
match its cousin, audit_send_reply_thread().

Reported-by: teroincn@gmail.com
Reviewed-by: Richard Guy Briggs <rgb@redhat.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 kernel/audit.c       |  2 +-
 kernel/audit.h       |  2 +-
 kernel/auditfilter.c | 16 +++++++---------
 3 files changed, 9 insertions(+), 11 deletions(-)

diff --git a/kernel/audit.c b/kernel/audit.c
index 20c78480d632..45741c3c48a4 100644
--- a/kernel/audit.c
+++ b/kernel/audit.c
@@ -893,7 +893,7 @@ static int kauditd_thread(void *dummy)
 	return 0;
 }
 
-int audit_send_list(void *_dest)
+int audit_send_list_thread(void *_dest)
 {
 	struct audit_netlink_list *dest = _dest;
 	struct sk_buff *skb;
diff --git a/kernel/audit.h b/kernel/audit.h
index 214e14948370..99badd7ba56f 100644
--- a/kernel/audit.h
+++ b/kernel/audit.h
@@ -248,7 +248,7 @@ struct audit_netlink_list {
 	struct sk_buff_head q;
 };
 
-int audit_send_list(void *_dest);
+int audit_send_list_thread(void *_dest);
 
 extern int selinux_audit_rule_update(void);
 
diff --git a/kernel/auditfilter.c b/kernel/auditfilter.c
index 1c8a48abda80..b2cc63ca0068 100644
--- a/kernel/auditfilter.c
+++ b/kernel/auditfilter.c
@@ -1157,11 +1157,8 @@ int audit_rule_change(int type, int seq, void *data, size_t datasz)
  */
 int audit_list_rules_send(struct sk_buff *request_skb, int seq)
 {
-	u32 portid = NETLINK_CB(request_skb).portid;
-	struct net *net = sock_net(NETLINK_CB(request_skb).sk);
 	struct task_struct *tsk;
 	struct audit_netlink_list *dest;
-	int err = 0;
 
 	/* We can't just spew out the rules here because we might fill
 	 * the available socket buffer space and deadlock waiting for
@@ -1169,25 +1166,26 @@ int audit_list_rules_send(struct sk_buff *request_skb, int seq)
 	 * happen if we're actually running in the context of auditctl
 	 * trying to _send_ the stuff */
 
-	dest = kmalloc(sizeof(struct audit_netlink_list), GFP_KERNEL);
+	dest = kmalloc(sizeof(*dest), GFP_KERNEL);
 	if (!dest)
 		return -ENOMEM;
-	dest->net = get_net(net);
-	dest->portid = portid;
+	dest->net = get_net(sock_net(NETLINK_CB(request_skb).sk));
+	dest->portid = NETLINK_CB(request_skb).portid;
 	skb_queue_head_init(&dest->q);
 
 	mutex_lock(&audit_filter_mutex);
 	audit_list_rules(seq, &dest->q);
 	mutex_unlock(&audit_filter_mutex);
 
-	tsk = kthread_run(audit_send_list, dest, "audit_send_list");
+	tsk = kthread_run(audit_send_list_thread, dest, "audit_send_list");
 	if (IS_ERR(tsk)) {
 		skb_queue_purge(&dest->q);
+		put_net(dest->net);
 		kfree(dest);
-		err = PTR_ERR(tsk);
+		return PTR_ERR(tsk);
 	}
 
-	return err;
+	return 0;
 }
 
 int audit_comparator(u32 left, u32 op, u32 right)
-- 
2.25.1

[PATCH AUTOSEL 4.19 042/106] audit: fix a net reference leak in audit_list_rules_send()

[Sasha Levin]

From: Paul Moore <paul@paul-moore.com>

[ Upstream commit 3054d06719079388a543de6adb812638675ad8f5 ]

If audit_list_rules_send() fails when trying to create a new thread
to send the rules it also fails to cleanup properly, leaking a
reference to a net structure.  This patch fixes the error patch and
renames audit_send_list() to audit_send_list_thread() to better
match its cousin, audit_send_reply_thread().

Reported-by: teroincn@gmail.com
Reviewed-by: Richard Guy Briggs <rgb@redhat.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 kernel/audit.c       |  2 +-
 kernel/audit.h       |  2 +-
 kernel/auditfilter.c | 16 +++++++---------
 3 files changed, 9 insertions(+), 11 deletions(-)

diff --git a/kernel/audit.c b/kernel/audit.c
index 20c78480d632..45741c3c48a4 100644
--- a/kernel/audit.c
+++ b/kernel/audit.c
@@ -893,7 +893,7 @@ static int kauditd_thread(void *dummy)
 	return 0;
 }
 
-int audit_send_list(void *_dest)
+int audit_send_list_thread(void *_dest)
 {
 	struct audit_netlink_list *dest = _dest;
 	struct sk_buff *skb;
diff --git a/kernel/audit.h b/kernel/audit.h
index 214e14948370..99badd7ba56f 100644
--- a/kernel/audit.h
+++ b/kernel/audit.h
@@ -248,7 +248,7 @@ struct audit_netlink_list {
 	struct sk_buff_head q;
 };
 
-int audit_send_list(void *_dest);
+int audit_send_list_thread(void *_dest);
 
 extern int selinux_audit_rule_update(void);
 
diff --git a/kernel/auditfilter.c b/kernel/auditfilter.c
index 1c8a48abda80..b2cc63ca0068 100644
--- a/kernel/auditfilter.c
+++ b/kernel/auditfilter.c
@@ -1157,11 +1157,8 @@ int audit_rule_change(int type, int seq, void *data, size_t datasz)
  */
 int audit_list_rules_send(struct sk_buff *request_skb, int seq)
 {
-	u32 portid = NETLINK_CB(request_skb).portid;
-	struct net *net = sock_net(NETLINK_CB(request_skb).sk);
 	struct task_struct *tsk;
 	struct audit_netlink_list *dest;
-	int err = 0;
 
 	/* We can't just spew out the rules here because we might fill
 	 * the available socket buffer space and deadlock waiting for
@@ -1169,25 +1166,26 @@ int audit_list_rules_send(struct sk_buff *request_skb, int seq)
 	 * happen if we're actually running in the context of auditctl
 	 * trying to _send_ the stuff */
 
-	dest = kmalloc(sizeof(struct audit_netlink_list), GFP_KERNEL);
+	dest = kmalloc(sizeof(*dest), GFP_KERNEL);
 	if (!dest)
 		return -ENOMEM;
-	dest->net = get_net(net);
-	dest->portid = portid;
+	dest->net = get_net(sock_net(NETLINK_CB(request_skb).sk));
+	dest->portid = NETLINK_CB(request_skb).portid;
 	skb_queue_head_init(&dest->q);
 
 	mutex_lock(&audit_filter_mutex);
 	audit_list_rules(seq, &dest->q);
 	mutex_unlock(&audit_filter_mutex);
 
-	tsk = kthread_run(audit_send_list, dest, "audit_send_list");
+	tsk = kthread_run(audit_send_list_thread, dest, "audit_send_list");
 	if (IS_ERR(tsk)) {
 		skb_queue_purge(&dest->q);
+		put_net(dest->net);
 		kfree(dest);
-		err = PTR_ERR(tsk);
+		return PTR_ERR(tsk);
 	}
 
-	return err;
+	return 0;
 }
 
 int audit_comparator(u32 left, u32 op, u32 right)
-- 
2.25.1


--
Linux-audit mailing list
Linux-audit@redhat.com
https://www.redhat.com/mailman/listinfo/linux-audit

[PATCH AUTOSEL 4.19 043/106] netfilter: nft_nat: return EOPNOTSUPP if type or flags are not supported

[Sasha Levin]

From: Pablo Neira Ayuso <pablo@netfilter.org>

[ Upstream commit 0d7c83463fdf7841350f37960a7abadd3e650b41 ]

Instead of EINVAL which should be used for malformed netlink messages.

Fixes: eb31628e37a0 ("netfilter: nf_tables: Add support for IPv6 NAT")
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/netfilter/nft_nat.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/net/netfilter/nft_nat.c b/net/netfilter/nft_nat.c
index c15807d10b91..3e82a7d0df2a 100644
--- a/net/netfilter/nft_nat.c
+++ b/net/netfilter/nft_nat.c
@@ -135,7 +135,7 @@ static int nft_nat_init(const struct nft_ctx *ctx, const struct nft_expr *expr,
 		priv->type = NF_NAT_MANIP_DST;
 		break;
 	default:
-		return -EINVAL;
+		return -EOPNOTSUPP;
 	}
 
 	if (tb[NFTA_NAT_FAMILY] == NULL)
@@ -202,7 +202,7 @@ static int nft_nat_init(const struct nft_ctx *ctx, const struct nft_expr *expr,
 	if (tb[NFTA_NAT_FLAGS]) {
 		priv->flags = ntohl(nla_get_be32(tb[NFTA_NAT_FLAGS]));
 		if (priv->flags & ~NF_NAT_RANGE_MASK)
-			return -EINVAL;
+			return -EOPNOTSUPP;
 	}
 
 	return nf_ct_netns_get(ctx->net, family);
-- 
2.25.1

[PATCH AUTOSEL 4.19 044/106] selftests/bpf: Fix memory leak in extract_build_id()

[Sasha Levin]

From: Andrii Nakryiko <andriin@fb.com>

[ Upstream commit 9f56bb531a809ecaa7f0ddca61d2cf3adc1cb81a ]

getline() allocates string, which has to be freed.

Fixes: 81f77fd0deeb ("bpf: add selftest for stackmap with BPF_F_STACK_BUILD_ID")
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Cc: Song Liu <songliubraving@fb.com>
Link: https://lore.kernel.org/bpf/20200429012111.277390-7-andriin@fb.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 tools/testing/selftests/bpf/test_progs.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/tools/testing/selftests/bpf/test_progs.c b/tools/testing/selftests/bpf/test_progs.c
index 89f8b0dae7ef..bad3505d66e0 100644
--- a/tools/testing/selftests/bpf/test_progs.c
+++ b/tools/testing/selftests/bpf/test_progs.c
@@ -1118,6 +1118,7 @@ static int extract_build_id(char *build_id, size_t size)
 		len = size;
 	memcpy(build_id, line, len);
 	build_id[len] = '\0';
+	free(line);
 	return 0;
 err:
 	fclose(fp);
-- 
2.25.1

[PATCH AUTOSEL 4.19 045/106] net: bcmgenet: set Rx mode before starting netif

[Sasha Levin]

From: Doug Berger <opendmb@gmail.com>

[ Upstream commit 72f96347628e73dbb61b307f18dd19293cc6792a ]

This commit explicitly calls the bcmgenet_set_rx_mode() function when
the network interface is started. This function is normally called by
ndo_set_rx_mode when the flags are changed, but apparently not when
the driver is suspended and resumed.

This change ensures that address filtering or promiscuous mode are
properly restored by the driver after the MAC may have been reset.

Fixes: b6e978e50444 ("net: bcmgenet: add suspend/resume callbacks")
Signed-off-by: Doug Berger <opendmb@gmail.com>
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/broadcom/genet/bcmgenet.c | 4 ++++
 1 file changed, 4 insertions(+)

diff --git a/drivers/net/ethernet/broadcom/genet/bcmgenet.c b/drivers/net/ethernet/broadcom/genet/bcmgenet.c
index 047fc0cf0263..40e8ef984b62 100644
--- a/drivers/net/ethernet/broadcom/genet/bcmgenet.c
+++ b/drivers/net/ethernet/broadcom/genet/bcmgenet.c
@@ -72,6 +72,9 @@
 #define GENET_RDMA_REG_OFF	(priv->hw_params->rdma_offset + \
 				TOTAL_DESC * DMA_DESC_SIZE)
 
+/* Forward declarations */
+static void bcmgenet_set_rx_mode(struct net_device *dev);
+
 static inline void bcmgenet_writel(u32 value, void __iomem *offset)
 {
 	/* MIPS chips strapped for BE will automagically configure the
@@ -2859,6 +2862,7 @@ static void bcmgenet_netif_start(struct net_device *dev)
 	struct bcmgenet_priv *priv = netdev_priv(dev);
 
 	/* Start the network engine */
+	bcmgenet_set_rx_mode(dev);
 	bcmgenet_enable_rx_napi(priv);
 
 	umac_enable_set(priv, CMD_TX_EN | CMD_RX_EN, true);
-- 
2.25.1

[PATCH AUTOSEL 4.19 046/106] lib/mpi: Fix 64-bit MIPS build with Clang

[Sasha Levin]

From: Nathan Chancellor <natechancellor@gmail.com>

[ Upstream commit 18f1ca46858eac22437819937ae44aa9a8f9f2fa ]

When building 64r6_defconfig with CONFIG_MIPS32_O32 disabled and
CONFIG_CRYPTO_RSA enabled:

lib/mpi/generic_mpih-mul1.c:37:24: error: invalid use of a cast in a
inline asm context requiring an l-value: remove the cast
or build with -fheinous-gnu-extensions
                umul_ppmm(prod_high, prod_low, s1_ptr[j], s2_limb);
                ~~~~~~~~~~~~~~~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~~~~~
lib/mpi/longlong.h:664:22: note: expanded from macro 'umul_ppmm'
                 : "=d" ((UDItype)(w0))
                         ~~~~~~~~~~^~~
lib/mpi/generic_mpih-mul1.c:37:13: error: invalid use of a cast in a
inline asm context requiring an l-value: remove the cast
or build with -fheinous-gnu-extensions
                umul_ppmm(prod_high, prod_low, s1_ptr[j], s2_limb);
                ~~~~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
lib/mpi/longlong.h:668:22: note: expanded from macro 'umul_ppmm'
                 : "=d" ((UDItype)(w1))
                         ~~~~~~~~~~^~~
2 errors generated.

This special case for umul_ppmm for MIPS64r6 was added in
commit bbc25bee37d2b ("lib/mpi: Fix umul_ppmm() for MIPS64r6"), due to
GCC being inefficient and emitting a __multi3 intrinsic.

There is no such issue with clang; with this patch applied, I can build
this configuration without any problems and there are no link errors
like mentioned in the commit above (which I can still reproduce with
GCC 9.3.0 when that commit is reverted). Only use this definition when
GCC is being used.

This really should have been caught by commit b0c091ae04f67 ("lib/mpi:
Eliminate unused umul_ppmm definitions for MIPS") when I was messing
around in this area but I was not testing 64-bit MIPS at the time.

Link: https://github.com/ClangBuiltLinux/linux/issues/885
Reported-by: Dmitry Golovin <dima@golovin.in>
Signed-off-by: Nathan Chancellor <natechancellor@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 lib/mpi/longlong.h | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/lib/mpi/longlong.h b/lib/mpi/longlong.h
index e01b705556aa..6c5229f98c9e 100644
--- a/lib/mpi/longlong.h
+++ b/lib/mpi/longlong.h
@@ -671,7 +671,7 @@ do {						\
 	**************  MIPS/64  **************
 	***************************************/
 #if (defined(__mips) && __mips >= 3) && W_TYPE_SIZE == 64
-#if defined(__mips_isa_rev) && __mips_isa_rev >= 6
+#if defined(__mips_isa_rev) && __mips_isa_rev >= 6 && defined(CONFIG_CC_IS_GCC)
 /*
  * GCC ends up emitting a __multi3 intrinsic call for MIPS64r6 with the plain C
  * code below, so we special case MIPS64r6 until the compiler can do better.
-- 
2.25.1

[PATCH AUTOSEL 4.19 047/106] perf: Add cond_resched() to task_function_call()

[Sasha Levin]

From: Barret Rhoden <brho@google.com>

[ Upstream commit 2ed6edd33a214bca02bd2b45e3fc3038a059436b ]

Under rare circumstances, task_function_call() can repeatedly fail and
cause a soft lockup.

There is a slight race where the process is no longer running on the cpu
we targeted by the time remote_function() runs.  The code will simply
try again.  If we are very unlucky, this will continue to fail, until a
watchdog fires.  This can happen in a heavily loaded, multi-core virtual
machine.

Reported-by: syzbot+bb4935a5c09b5ff79940@syzkaller.appspotmail.com
Signed-off-by: Barret Rhoden <brho@google.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20200414222920.121401-1-brho@google.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 kernel/events/core.c | 23 ++++++++++++++---------
 1 file changed, 14 insertions(+), 9 deletions(-)

diff --git a/kernel/events/core.c b/kernel/events/core.c
index 21e3c65abc76..a17e6302ded5 100644
--- a/kernel/events/core.c
+++ b/kernel/events/core.c
@@ -94,11 +94,11 @@ static void remote_function(void *data)
  * @info:	the function call argument
  *
  * Calls the function @func when the task is currently running. This might
- * be on the current CPU, which just calls the function directly
+ * be on the current CPU, which just calls the function directly.  This will
+ * retry due to any failures in smp_call_function_single(), such as if the
+ * task_cpu() goes offline concurrently.
  *
- * returns: @func return value, or
- *	    -ESRCH  - when the process isn't running
- *	    -EAGAIN - when the process moved away
+ * returns @func return value or -ESRCH when the process isn't running
  */
 static int
 task_function_call(struct task_struct *p, remote_function_f func, void *info)
@@ -111,11 +111,16 @@ task_function_call(struct task_struct *p, remote_function_f func, void *info)
 	};
 	int ret;
 
-	do {
-		ret = smp_call_function_single(task_cpu(p), remote_function, &data, 1);
-		if (!ret)
-			ret = data.ret;
-	} while (ret == -EAGAIN);
+	for (;;) {
+		ret = smp_call_function_single(task_cpu(p), remote_function,
+					       &data, 1);
+		ret = !ret ? data.ret : -EAGAIN;
+
+		if (ret != -EAGAIN)
+			break;
+
+		cond_resched();
+	}
 
 	return ret;
 }
-- 
2.25.1

[PATCH AUTOSEL 4.19 048/106] exit: Move preemption fixup up, move blocking operations down

[Sasha Levin]

From: Jann Horn <jannh@google.com>

[ Upstream commit 586b58cac8b4683eb58a1446fbc399de18974e40 ]

With CONFIG_DEBUG_ATOMIC_SLEEP=y and CONFIG_CGROUPS=y, kernel oopses in
non-preemptible context look untidy; after the main oops, the kernel prints
a "sleeping function called from invalid context" report because
exit_signals() -> cgroup_threadgroup_change_begin() -> percpu_down_read()
can sleep, and that happens before the preempt_count_set(PREEMPT_ENABLED)
fixup.

It looks like the same thing applies to profile_task_exit() and
kcov_task_exit().

Fix it by moving the preemption fixup up and the calls to
profile_task_exit() and kcov_task_exit() down.

Fixes: 1dc0fffc48af ("sched/core: Robustify preemption leak checks")
Signed-off-by: Jann Horn <jannh@google.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20200305220657.46800-1-jannh@google.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 kernel/exit.c | 25 ++++++++++++++++---------
 1 file changed, 16 insertions(+), 9 deletions(-)

diff --git a/kernel/exit.c b/kernel/exit.c
index 54c3269b8dda..9c76bacb043d 100644
--- a/kernel/exit.c
+++ b/kernel/exit.c
@@ -772,8 +772,12 @@ void __noreturn do_exit(long code)
 	struct task_struct *tsk = current;
 	int group_dead;
 
-	profile_task_exit(tsk);
-	kcov_task_exit(tsk);
+	/*
+	 * We can get here from a kernel oops, sometimes with preemption off.
+	 * Start by checking for critical errors.
+	 * Then fix up important state like USER_DS and preemption.
+	 * Then do everything else.
+	 */
 
 	WARN_ON(blk_needs_flush_plug(tsk));
 
@@ -791,6 +795,16 @@ void __noreturn do_exit(long code)
 	 */
 	set_fs(USER_DS);
 
+	if (unlikely(in_atomic())) {
+		pr_info("note: %s[%d] exited with preempt_count %d\n",
+			current->comm, task_pid_nr(current),
+			preempt_count());
+		preempt_count_set(PREEMPT_ENABLED);
+	}
+
+	profile_task_exit(tsk);
+	kcov_task_exit(tsk);
+
 	ptrace_event(PTRACE_EVENT_EXIT, code);
 
 	validate_creds_for_do_exit(tsk);
@@ -828,13 +842,6 @@ void __noreturn do_exit(long code)
 	raw_spin_lock_irq(&tsk->pi_lock);
 	raw_spin_unlock_irq(&tsk->pi_lock);
 
-	if (unlikely(in_atomic())) {
-		pr_info("note: %s[%d] exited with preempt_count %d\n",
-			current->comm, task_pid_nr(current),
-			preempt_count());
-		preempt_count_set(PREEMPT_ENABLED);
-	}
-
 	/* sync mm's RSS info before statistics gathering */
 	if (tsk->mm)
 		sync_mm_rss(tsk->mm);
-- 
2.25.1

[PATCH AUTOSEL 4.19 049/106] sched/core: Fix illegal RCU from offline CPUs

[Sasha Levin]

From: Peter Zijlstra <peterz@infradead.org>

[ Upstream commit bf2c59fce4074e55d622089b34be3a6bc95484fb ]

In the CPU-offline process, it calls mmdrop() after idle entry and the
subsequent call to cpuhp_report_idle_dead(). Once execution passes the
call to rcu_report_dead(), RCU is ignoring the CPU, which results in
lockdep complaining when mmdrop() uses RCU from either memcg or
debugobjects below.

Fix it by cleaning up the active_mm state from BP instead. Every arch
which has CONFIG_HOTPLUG_CPU should have already called idle_task_exit()
from AP. The only exception is parisc because it switches them to
&init_mm unconditionally (see smp_boot_one_cpu() and smp_cpu_init()),
but the patch will still work there because it calls mmgrab(&init_mm) in
smp_cpu_init() and then should call mmdrop(&init_mm) in finish_cpu().

  WARNING: suspicious RCU usage
  -----------------------------
  kernel/workqueue.c:710 RCU or wq_pool_mutex should be held!

  other info that might help us debug this:

  RCU used illegally from offline CPU!
  Call Trace:
   dump_stack+0xf4/0x164 (unreliable)
   lockdep_rcu_suspicious+0x140/0x164
   get_work_pool+0x110/0x150
   __queue_work+0x1bc/0xca0
   queue_work_on+0x114/0x120
   css_release+0x9c/0xc0
   percpu_ref_put_many+0x204/0x230
   free_pcp_prepare+0x264/0x570
   free_unref_page+0x38/0xf0
   __mmdrop+0x21c/0x2c0
   idle_task_exit+0x170/0x1b0
   pnv_smp_cpu_kill_self+0x38/0x2e0
   cpu_die+0x48/0x64
   arch_cpu_idle_dead+0x30/0x50
   do_idle+0x2f4/0x470
   cpu_startup_entry+0x38/0x40
   start_secondary+0x7a8/0xa80
   start_secondary_resume+0x10/0x14

Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Qian Cai <cai@lca.pw>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Michael Ellerman <mpe@ellerman.id.au> (powerpc)
Link: https://lkml.kernel.org/r/20200401214033.8448-1-cai@lca.pw
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/powerpc/platforms/powernv/smp.c |  1 -
 include/linux/sched/mm.h             |  2 ++
 kernel/cpu.c                         | 18 +++++++++++++++++-
 kernel/sched/core.c                  |  5 +++--
 4 files changed, 22 insertions(+), 4 deletions(-)

diff --git a/arch/powerpc/platforms/powernv/smp.c b/arch/powerpc/platforms/powernv/smp.c
index 3d3c989e44dd..8d49ba370c50 100644
--- a/arch/powerpc/platforms/powernv/smp.c
+++ b/arch/powerpc/platforms/powernv/smp.c
@@ -171,7 +171,6 @@ static void pnv_smp_cpu_kill_self(void)
 	/* Standard hot unplug procedure */
 
 	idle_task_exit();
-	current->active_mm = NULL; /* for sanity */
 	cpu = smp_processor_id();
 	DBG("CPU%d offline\n", cpu);
 	generic_set_cpu_dead(cpu);
diff --git a/include/linux/sched/mm.h b/include/linux/sched/mm.h
index e9d4e389aed9..766bbe813861 100644
--- a/include/linux/sched/mm.h
+++ b/include/linux/sched/mm.h
@@ -49,6 +49,8 @@ static inline void mmdrop(struct mm_struct *mm)
 		__mmdrop(mm);
 }
 
+void mmdrop(struct mm_struct *mm);
+
 /*
  * This has to be called after a get_task_mm()/mmget_not_zero()
  * followed by taking the mmap_sem for writing before modifying the
diff --git a/kernel/cpu.c b/kernel/cpu.c
index 6d6c106a495c..08b9d6ba0807 100644
--- a/kernel/cpu.c
+++ b/kernel/cpu.c
@@ -3,6 +3,7 @@
  *
  * This code is licenced under the GPL.
  */
+#include <linux/sched/mm.h>
 #include <linux/proc_fs.h>
 #include <linux/smp.h>
 #include <linux/init.h>
@@ -532,6 +533,21 @@ static int bringup_cpu(unsigned int cpu)
 	return bringup_wait_for_ap(cpu);
 }
 
+static int finish_cpu(unsigned int cpu)
+{
+	struct task_struct *idle = idle_thread_get(cpu);
+	struct mm_struct *mm = idle->active_mm;
+
+	/*
+	 * idle_task_exit() will have switched to &init_mm, now
+	 * clean up any remaining active_mm state.
+	 */
+	if (mm != &init_mm)
+		idle->active_mm = &init_mm;
+	mmdrop(mm);
+	return 0;
+}
+
 /*
  * Hotplug state machine related functions
  */
@@ -1379,7 +1395,7 @@ static struct cpuhp_step cpuhp_hp_states[] = {
 	[CPUHP_BRINGUP_CPU] = {
 		.name			= "cpu:bringup",
 		.startup.single		= bringup_cpu,
-		.teardown.single	= NULL,
+		.teardown.single	= finish_cpu,
 		.cant_stop		= true,
 	},
 	/* Final state before CPU kills itself */
diff --git a/kernel/sched/core.c b/kernel/sched/core.c
index 2befd2c4ce9e..0325ccf3a8e4 100644
--- a/kernel/sched/core.c
+++ b/kernel/sched/core.c
@@ -5571,13 +5571,14 @@ void idle_task_exit(void)
 	struct mm_struct *mm = current->active_mm;
 
 	BUG_ON(cpu_online(smp_processor_id()));
+	BUG_ON(current != this_rq()->idle);
 
 	if (mm != &init_mm) {
 		switch_mm(mm, &init_mm, current);
-		current->active_mm = &init_mm;
 		finish_arch_post_lock_switch();
 	}
-	mmdrop(mm);
+
+	/* finish_cpu(), as ran on the BP, will clean up the active_mm state */
 }
 
 /*
-- 
2.25.1

[PATCH AUTOSEL 4.19 049/106] sched/core: Fix illegal RCU from offline CPUs

[Sasha Levin]

From: Peter Zijlstra <peterz@infradead.org>

[ Upstream commit bf2c59fce4074e55d622089b34be3a6bc95484fb ]

In the CPU-offline process, it calls mmdrop() after idle entry and the
subsequent call to cpuhp_report_idle_dead(). Once execution passes the
call to rcu_report_dead(), RCU is ignoring the CPU, which results in
lockdep complaining when mmdrop() uses RCU from either memcg or
debugobjects below.

Fix it by cleaning up the active_mm state from BP instead. Every arch
which has CONFIG_HOTPLUG_CPU should have already called idle_task_exit()
from AP. The only exception is parisc because it switches them to
&init_mm unconditionally (see smp_boot_one_cpu() and smp_cpu_init()),
but the patch will still work there because it calls mmgrab(&init_mm) in
smp_cpu_init() and then should call mmdrop(&init_mm) in finish_cpu().

  WARNING: suspicious RCU usage
  -----------------------------
  kernel/workqueue.c:710 RCU or wq_pool_mutex should be held!

  other info that might help us debug this:

  RCU used illegally from offline CPU!
  Call Trace:
   dump_stack+0xf4/0x164 (unreliable)
   lockdep_rcu_suspicious+0x140/0x164
   get_work_pool+0x110/0x150
   __queue_work+0x1bc/0xca0
   queue_work_on+0x114/0x120
   css_release+0x9c/0xc0
   percpu_ref_put_many+0x204/0x230
   free_pcp_prepare+0x264/0x570
   free_unref_page+0x38/0xf0
   __mmdrop+0x21c/0x2c0
   idle_task_exit+0x170/0x1b0
   pnv_smp_cpu_kill_self+0x38/0x2e0
   cpu_die+0x48/0x64
   arch_cpu_idle_dead+0x30/0x50
   do_idle+0x2f4/0x470
   cpu_startup_entry+0x38/0x40
   start_secondary+0x7a8/0xa80
   start_secondary_resume+0x10/0x14

Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Qian Cai <cai@lca.pw>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Michael Ellerman <mpe@ellerman.id.au> (powerpc)
Link: https://lkml.kernel.org/r/20200401214033.8448-1-cai@lca.pw
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/powerpc/platforms/powernv/smp.c |  1 -
 include/linux/sched/mm.h             |  2 ++
 kernel/cpu.c                         | 18 +++++++++++++++++-
 kernel/sched/core.c                  |  5 +++--
 4 files changed, 22 insertions(+), 4 deletions(-)

diff --git a/arch/powerpc/platforms/powernv/smp.c b/arch/powerpc/platforms/powernv/smp.c
index 3d3c989e44dd..8d49ba370c50 100644
--- a/arch/powerpc/platforms/powernv/smp.c
+++ b/arch/powerpc/platforms/powernv/smp.c
@@ -171,7 +171,6 @@ static void pnv_smp_cpu_kill_self(void)
 	/* Standard hot unplug procedure */
 
 	idle_task_exit();
-	current->active_mm = NULL; /* for sanity */
 	cpu = smp_processor_id();
 	DBG("CPU%d offline\n", cpu);
 	generic_set_cpu_dead(cpu);
diff --git a/include/linux/sched/mm.h b/include/linux/sched/mm.h
index e9d4e389aed9..766bbe813861 100644
--- a/include/linux/sched/mm.h
+++ b/include/linux/sched/mm.h
@@ -49,6 +49,8 @@ static inline void mmdrop(struct mm_struct *mm)
 		__mmdrop(mm);
 }
 
+void mmdrop(struct mm_struct *mm);
+
 /*
  * This has to be called after a get_task_mm()/mmget_not_zero()
  * followed by taking the mmap_sem for writing before modifying the
diff --git a/kernel/cpu.c b/kernel/cpu.c
index 6d6c106a495c..08b9d6ba0807 100644
--- a/kernel/cpu.c
+++ b/kernel/cpu.c
@@ -3,6 +3,7 @@
  *
  * This code is licenced under the GPL.
  */
+#include <linux/sched/mm.h>
 #include <linux/proc_fs.h>
 #include <linux/smp.h>
 #include <linux/init.h>
@@ -532,6 +533,21 @@ static int bringup_cpu(unsigned int cpu)
 	return bringup_wait_for_ap(cpu);
 }
 
+static int finish_cpu(unsigned int cpu)
+{
+	struct task_struct *idle = idle_thread_get(cpu);
+	struct mm_struct *mm = idle->active_mm;
+
+	/*
+	 * idle_task_exit() will have switched to &init_mm, now
+	 * clean up any remaining active_mm state.
+	 */
+	if (mm != &init_mm)
+		idle->active_mm = &init_mm;
+	mmdrop(mm);
+	return 0;
+}
+
 /*
  * Hotplug state machine related functions
  */
@@ -1379,7 +1395,7 @@ static struct cpuhp_step cpuhp_hp_states[] = {
 	[CPUHP_BRINGUP_CPU] = {
 		.name			= "cpu:bringup",
 		.startup.single		= bringup_cpu,
-		.teardown.single	= NULL,
+		.teardown.single	= finish_cpu,
 		.cant_stop		= true,
 	},
 	/* Final state before CPU kills itself */
diff --git a/kernel/sched/core.c b/kernel/sched/core.c
index 2befd2c4ce9e..0325ccf3a8e4 100644
--- a/kernel/sched/core.c
+++ b/kernel/sched/core.c
@@ -5571,13 +5571,14 @@ void idle_task_exit(void)
 	struct mm_struct *mm = current->active_mm;
 
 	BUG_ON(cpu_online(smp_processor_id()));
+	BUG_ON(current != this_rq()->idle);
 
 	if (mm != &init_mm) {
 		switch_mm(mm, &init_mm, current);
-		current->active_mm = &init_mm;
 		finish_arch_post_lock_switch();
 	}
-	mmdrop(mm);
+
+	/* finish_cpu(), as ran on the BP, will clean up the active_mm state */
 }
 
 /*
-- 
2.25.1

[PATCH AUTOSEL 4.19 050/106] drivers/perf: hisi: Fix typo in events attribute array

[Sasha Levin]

From: Shaokun Zhang <zhangshaokun@hisilicon.com>

[ Upstream commit 88562f06ebf56587788783e5420f25fde3ca36c8 ]

Fix up one typo: wr_dr_64b -> wr_ddr_64b.

Fixes: 2bab3cf9104c ("perf: hisi: Add support for HiSilicon SoC HHA PMU driver")
Signed-off-by: Shaokun Zhang <zhangshaokun@hisilicon.com>
Cc: Will Deacon <will@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Link: https://lore.kernel.org/r/1587643530-34357-1-git-send-email-zhangshaokun@hisilicon.com
Signed-off-by: Will Deacon <will@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/perf/hisilicon/hisi_uncore_hha_pmu.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/perf/hisilicon/hisi_uncore_hha_pmu.c b/drivers/perf/hisilicon/hisi_uncore_hha_pmu.c
index 443906e0aff3..0393c4471227 100644
--- a/drivers/perf/hisilicon/hisi_uncore_hha_pmu.c
+++ b/drivers/perf/hisilicon/hisi_uncore_hha_pmu.c
@@ -290,7 +290,7 @@ static struct attribute *hisi_hha_pmu_events_attr[] = {
 	HISI_PMU_EVENT_ATTR(rx_wbip,		0x05),
 	HISI_PMU_EVENT_ATTR(rx_wtistash,	0x11),
 	HISI_PMU_EVENT_ATTR(rd_ddr_64b,		0x1c),
-	HISI_PMU_EVENT_ATTR(wr_dr_64b,		0x1d),
+	HISI_PMU_EVENT_ATTR(wr_ddr_64b,		0x1d),
 	HISI_PMU_EVENT_ATTR(rd_ddr_128b,	0x1e),
 	HISI_PMU_EVENT_ATTR(wr_ddr_128b,	0x1f),
 	HISI_PMU_EVENT_ATTR(spill_num,		0x20),
-- 
2.25.1

[PATCH AUTOSEL 4.19 051/106] net: lpc-enet: fix error return code in lpc_mii_init()

[Sasha Levin]

From: Wei Yongjun <weiyongjun1@huawei.com>

[ Upstream commit 88ec7cb22ddde725ed4ce15991f0bd9dd817fd85 ]

Fix to return a negative error code from the error handling
case instead of 0, as done elsewhere in this function.

Fixes: b7370112f519 ("lpc32xx: Added ethernet driver")
Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Acked-by: Vladimir Zapolskiy <vz@mleia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/nxp/lpc_eth.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/drivers/net/ethernet/nxp/lpc_eth.c b/drivers/net/ethernet/nxp/lpc_eth.c
index 41d30f55c946..6bd6c261f2ba 100644
--- a/drivers/net/ethernet/nxp/lpc_eth.c
+++ b/drivers/net/ethernet/nxp/lpc_eth.c
@@ -845,7 +845,8 @@ static int lpc_mii_init(struct netdata_local *pldat)
 	if (mdiobus_register(pldat->mii_bus))
 		goto err_out_unregister_bus;
 
-	if (lpc_mii_probe(pldat->ndev) != 0)
+	err = lpc_mii_probe(pldat->ndev);
+	if (err)
 		goto err_out_unregister_bus;
 
 	return 0;
-- 
2.25.1

[PATCH AUTOSEL 4.19 051/106] net: lpc-enet: fix error return code in lpc_mii_init()

[Sasha Levin]

From: Wei Yongjun <weiyongjun1@huawei.com>

[ Upstream commit 88ec7cb22ddde725ed4ce15991f0bd9dd817fd85 ]

Fix to return a negative error code from the error handling
case instead of 0, as done elsewhere in this function.

Fixes: b7370112f519 ("lpc32xx: Added ethernet driver")
Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Acked-by: Vladimir Zapolskiy <vz@mleia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/nxp/lpc_eth.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/drivers/net/ethernet/nxp/lpc_eth.c b/drivers/net/ethernet/nxp/lpc_eth.c
index 41d30f55c946..6bd6c261f2ba 100644
--- a/drivers/net/ethernet/nxp/lpc_eth.c
+++ b/drivers/net/ethernet/nxp/lpc_eth.c
@@ -845,7 +845,8 @@ static int lpc_mii_init(struct netdata_local *pldat)
 	if (mdiobus_register(pldat->mii_bus))
 		goto err_out_unregister_bus;
 
-	if (lpc_mii_probe(pldat->ndev) != 0)
+	err = lpc_mii_probe(pldat->ndev);
+	if (err)
 		goto err_out_unregister_bus;
 
 	return 0;
-- 
2.25.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH AUTOSEL 4.19 052/106] media: cec: silence shift wrapping warning in __cec_s_log_addrs()

[Sasha Levin]

From: Dan Carpenter <dan.carpenter@oracle.com>

[ Upstream commit 3b5af3171e2d5a73ae6f04965ed653d039904eb6 ]

The log_addrs->log_addr_type[i] value is a u8 which is controlled by
the user and comes from the ioctl.  If it's over 31 then that results in
undefined behavior (shift wrapping) and that leads to a Smatch static
checker warning.  We already cap the value later so we can silence the
warning just by re-ordering the existing checks.

I think the UBSan checker will also catch this bug at runtime and
generate a warning.  But otherwise the bug is harmless.

Fixes: 9881fe0ca187 ("[media] cec: add HDMI CEC framework (adapter)")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/media/cec/cec-adap.c | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)

diff --git a/drivers/media/cec/cec-adap.c b/drivers/media/cec/cec-adap.c
index ba7e976bf6dc..60b20ae02b05 100644
--- a/drivers/media/cec/cec-adap.c
+++ b/drivers/media/cec/cec-adap.c
@@ -1668,6 +1668,10 @@ int __cec_s_log_addrs(struct cec_adapter *adap,
 		unsigned j;
 
 		log_addrs->log_addr[i] = CEC_LOG_ADDR_INVALID;
+		if (log_addrs->log_addr_type[i] > CEC_LOG_ADDR_TYPE_UNREGISTERED) {
+			dprintk(1, "unknown logical address type\n");
+			return -EINVAL;
+		}
 		if (type_mask & (1 << log_addrs->log_addr_type[i])) {
 			dprintk(1, "duplicate logical address type\n");
 			return -EINVAL;
@@ -1688,10 +1692,6 @@ int __cec_s_log_addrs(struct cec_adapter *adap,
 			dprintk(1, "invalid primary device type\n");
 			return -EINVAL;
 		}
-		if (log_addrs->log_addr_type[i] > CEC_LOG_ADDR_TYPE_UNREGISTERED) {
-			dprintk(1, "unknown logical address type\n");
-			return -EINVAL;
-		}
 		for (j = 0; j < feature_sz; j++) {
 			if ((features[j] & 0x80) == 0) {
 				if (op_is_dev_features)
-- 
2.25.1

[PATCH AUTOSEL 4.19 053/106] net: allwinner: Fix use correct return type for ndo_start_xmit()

[Sasha Levin]

From: Yunjian Wang <wangyunjian@huawei.com>

[ Upstream commit 09f6c44aaae0f1bdb8b983d7762676d5018c53bc ]

The method ndo_start_xmit() returns a value of type netdev_tx_t. Fix
the ndo function to use the correct type. And emac_start_xmit() can
leak one skb if 'channel' == 3.

Signed-off-by: Yunjian Wang <wangyunjian@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/allwinner/sun4i-emac.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/net/ethernet/allwinner/sun4i-emac.c b/drivers/net/ethernet/allwinner/sun4i-emac.c
index 3143de45baaa..c458b81ba63a 100644
--- a/drivers/net/ethernet/allwinner/sun4i-emac.c
+++ b/drivers/net/ethernet/allwinner/sun4i-emac.c
@@ -433,7 +433,7 @@ static void emac_timeout(struct net_device *dev)
 /* Hardware start transmission.
  * Send a packet to media from the upper layer.
  */
-static int emac_start_xmit(struct sk_buff *skb, struct net_device *dev)
+static netdev_tx_t emac_start_xmit(struct sk_buff *skb, struct net_device *dev)
 {
 	struct emac_board_info *db = netdev_priv(dev);
 	unsigned long channel;
@@ -441,7 +441,7 @@ static int emac_start_xmit(struct sk_buff *skb, struct net_device *dev)
 
 	channel = db->tx_fifo_stat & 3;
 	if (channel == 3)
-		return 1;
+		return NETDEV_TX_BUSY;
 
 	channel = (channel == 1 ? 1 : 0);
 
-- 
2.25.1

[PATCH AUTOSEL 4.19 053/106] net: allwinner: Fix use correct return type for ndo_start_xmit()

[Sasha Levin]

From: Yunjian Wang <wangyunjian@huawei.com>

[ Upstream commit 09f6c44aaae0f1bdb8b983d7762676d5018c53bc ]

The method ndo_start_xmit() returns a value of type netdev_tx_t. Fix
the ndo function to use the correct type. And emac_start_xmit() can
leak one skb if 'channel' == 3.

Signed-off-by: Yunjian Wang <wangyunjian@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/allwinner/sun4i-emac.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/net/ethernet/allwinner/sun4i-emac.c b/drivers/net/ethernet/allwinner/sun4i-emac.c
index 3143de45baaa..c458b81ba63a 100644
--- a/drivers/net/ethernet/allwinner/sun4i-emac.c
+++ b/drivers/net/ethernet/allwinner/sun4i-emac.c
@@ -433,7 +433,7 @@ static void emac_timeout(struct net_device *dev)
 /* Hardware start transmission.
  * Send a packet to media from the upper layer.
  */
-static int emac_start_xmit(struct sk_buff *skb, struct net_device *dev)
+static netdev_tx_t emac_start_xmit(struct sk_buff *skb, struct net_device *dev)
 {
 	struct emac_board_info *db = netdev_priv(dev);
 	unsigned long channel;
@@ -441,7 +441,7 @@ static int emac_start_xmit(struct sk_buff *skb, struct net_device *dev)
 
 	channel = db->tx_fifo_stat & 3;
 	if (channel == 3)
-		return 1;
+		return NETDEV_TX_BUSY;
 
 	channel = (channel == 1 ? 1 : 0);
 
-- 
2.25.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH AUTOSEL 4.19 054/106] powerpc/spufs: fix copy_to_user while atomic

[Sasha Levin]

From: Jeremy Kerr <jk@ozlabs.org>

[ Upstream commit 88413a6bfbbe2f648df399b62f85c934460b7a4d ]

Currently, we may perform a copy_to_user (through
simple_read_from_buffer()) while holding a context's register_lock,
while accessing the context save area.

This change uses a temporary buffer for the context save area data,
which we then pass to simple_read_from_buffer.

Includes changes from Christoph Hellwig <hch@lst.de>.

Fixes: bf1ab978be23 ("[POWERPC] coredump: Add SPU elf notes to coredump.")
Signed-off-by: Jeremy Kerr <jk@ozlabs.org>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
[hch: renamed to function to avoid ___-prefixes]
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/powerpc/platforms/cell/spufs/file.c | 113 +++++++++++++++--------
 1 file changed, 75 insertions(+), 38 deletions(-)

diff --git a/arch/powerpc/platforms/cell/spufs/file.c b/arch/powerpc/platforms/cell/spufs/file.c
index 43e7b93f27c7..d16adcd93921 100644
--- a/arch/powerpc/platforms/cell/spufs/file.c
+++ b/arch/powerpc/platforms/cell/spufs/file.c
@@ -1991,8 +1991,9 @@ static ssize_t __spufs_mbox_info_read(struct spu_context *ctx,
 static ssize_t spufs_mbox_info_read(struct file *file, char __user *buf,
 				   size_t len, loff_t *pos)
 {
-	int ret;
 	struct spu_context *ctx = file->private_data;
+	u32 stat, data;
+	int ret;
 
 	if (!access_ok(VERIFY_WRITE, buf, len))
 		return -EFAULT;
@@ -2001,11 +2002,16 @@ static ssize_t spufs_mbox_info_read(struct file *file, char __user *buf,
 	if (ret)
 		return ret;
 	spin_lock(&ctx->csa.register_lock);
-	ret = __spufs_mbox_info_read(ctx, buf, len, pos);
+	stat = ctx->csa.prob.mb_stat_R;
+	data = ctx->csa.prob.pu_mb_R;
 	spin_unlock(&ctx->csa.register_lock);
 	spu_release_saved(ctx);
 
-	return ret;
+	/* EOF if there's no entry in the mbox */
+	if (!(stat & 0x0000ff))
+		return 0;
+
+	return simple_read_from_buffer(buf, len, pos, &data, sizeof(data));
 }
 
 static const struct file_operations spufs_mbox_info_fops = {
@@ -2032,6 +2038,7 @@ static ssize_t spufs_ibox_info_read(struct file *file, char __user *buf,
 				   size_t len, loff_t *pos)
 {
 	struct spu_context *ctx = file->private_data;
+	u32 stat, data;
 	int ret;
 
 	if (!access_ok(VERIFY_WRITE, buf, len))
@@ -2041,11 +2048,16 @@ static ssize_t spufs_ibox_info_read(struct file *file, char __user *buf,
 	if (ret)
 		return ret;
 	spin_lock(&ctx->csa.register_lock);
-	ret = __spufs_ibox_info_read(ctx, buf, len, pos);
+	stat = ctx->csa.prob.mb_stat_R;
+	data = ctx->csa.priv2.puint_mb_R;
 	spin_unlock(&ctx->csa.register_lock);
 	spu_release_saved(ctx);
 
-	return ret;
+	/* EOF if there's no entry in the ibox */
+	if (!(stat & 0xff0000))
+		return 0;
+
+	return simple_read_from_buffer(buf, len, pos, &data, sizeof(data));
 }
 
 static const struct file_operations spufs_ibox_info_fops = {
@@ -2054,6 +2066,11 @@ static const struct file_operations spufs_ibox_info_fops = {
 	.llseek  = generic_file_llseek,
 };
 
+static size_t spufs_wbox_info_cnt(struct spu_context *ctx)
+{
+	return (4 - ((ctx->csa.prob.mb_stat_R & 0x00ff00) >> 8)) * sizeof(u32);
+}
+
 static ssize_t __spufs_wbox_info_read(struct spu_context *ctx,
 			char __user *buf, size_t len, loff_t *pos)
 {
@@ -2062,7 +2079,7 @@ static ssize_t __spufs_wbox_info_read(struct spu_context *ctx,
 	u32 wbox_stat;
 
 	wbox_stat = ctx->csa.prob.mb_stat_R;
-	cnt = 4 - ((wbox_stat & 0x00ff00) >> 8);
+	cnt = spufs_wbox_info_cnt(ctx);
 	for (i = 0; i < cnt; i++) {
 		data[i] = ctx->csa.spu_mailbox_data[i];
 	}
@@ -2075,7 +2092,8 @@ static ssize_t spufs_wbox_info_read(struct file *file, char __user *buf,
 				   size_t len, loff_t *pos)
 {
 	struct spu_context *ctx = file->private_data;
-	int ret;
+	u32 data[ARRAY_SIZE(ctx->csa.spu_mailbox_data)];
+	int ret, count;
 
 	if (!access_ok(VERIFY_WRITE, buf, len))
 		return -EFAULT;
@@ -2084,11 +2102,13 @@ static ssize_t spufs_wbox_info_read(struct file *file, char __user *buf,
 	if (ret)
 		return ret;
 	spin_lock(&ctx->csa.register_lock);
-	ret = __spufs_wbox_info_read(ctx, buf, len, pos);
+	count = spufs_wbox_info_cnt(ctx);
+	memcpy(&data, &ctx->csa.spu_mailbox_data, sizeof(data));
 	spin_unlock(&ctx->csa.register_lock);
 	spu_release_saved(ctx);
 
-	return ret;
+	return simple_read_from_buffer(buf, len, pos, &data,
+				count * sizeof(u32));
 }
 
 static const struct file_operations spufs_wbox_info_fops = {
@@ -2097,27 +2117,33 @@ static const struct file_operations spufs_wbox_info_fops = {
 	.llseek  = generic_file_llseek,
 };
 
-static ssize_t __spufs_dma_info_read(struct spu_context *ctx,
-			char __user *buf, size_t len, loff_t *pos)
+static void spufs_get_dma_info(struct spu_context *ctx,
+		struct spu_dma_info *info)
 {
-	struct spu_dma_info info;
-	struct mfc_cq_sr *qp, *spuqp;
 	int i;
 
-	info.dma_info_type = ctx->csa.priv2.spu_tag_status_query_RW;
-	info.dma_info_mask = ctx->csa.lscsa->tag_mask.slot[0];
-	info.dma_info_status = ctx->csa.spu_chnldata_RW[24];
-	info.dma_info_stall_and_notify = ctx->csa.spu_chnldata_RW[25];
-	info.dma_info_atomic_command_status = ctx->csa.spu_chnldata_RW[27];
+	info->dma_info_type = ctx->csa.priv2.spu_tag_status_query_RW;
+	info->dma_info_mask = ctx->csa.lscsa->tag_mask.slot[0];
+	info->dma_info_status = ctx->csa.spu_chnldata_RW[24];
+	info->dma_info_stall_and_notify = ctx->csa.spu_chnldata_RW[25];
+	info->dma_info_atomic_command_status = ctx->csa.spu_chnldata_RW[27];
 	for (i = 0; i < 16; i++) {
-		qp = &info.dma_info_command_data[i];
-		spuqp = &ctx->csa.priv2.spuq[i];
+		struct mfc_cq_sr *qp = &info->dma_info_command_data[i];
+		struct mfc_cq_sr *spuqp = &ctx->csa.priv2.spuq[i];
 
 		qp->mfc_cq_data0_RW = spuqp->mfc_cq_data0_RW;
 		qp->mfc_cq_data1_RW = spuqp->mfc_cq_data1_RW;
 		qp->mfc_cq_data2_RW = spuqp->mfc_cq_data2_RW;
 		qp->mfc_cq_data3_RW = spuqp->mfc_cq_data3_RW;
 	}
+}
+
+static ssize_t __spufs_dma_info_read(struct spu_context *ctx,
+			char __user *buf, size_t len, loff_t *pos)
+{
+	struct spu_dma_info info;
+
+	spufs_get_dma_info(ctx, &info);
 
 	return simple_read_from_buffer(buf, len, pos, &info,
 				sizeof info);
@@ -2127,6 +2153,7 @@ static ssize_t spufs_dma_info_read(struct file *file, char __user *buf,
 			      size_t len, loff_t *pos)
 {
 	struct spu_context *ctx = file->private_data;
+	struct spu_dma_info info;
 	int ret;
 
 	if (!access_ok(VERIFY_WRITE, buf, len))
@@ -2136,11 +2163,12 @@ static ssize_t spufs_dma_info_read(struct file *file, char __user *buf,
 	if (ret)
 		return ret;
 	spin_lock(&ctx->csa.register_lock);
-	ret = __spufs_dma_info_read(ctx, buf, len, pos);
+	spufs_get_dma_info(ctx, &info);
 	spin_unlock(&ctx->csa.register_lock);
 	spu_release_saved(ctx);
 
-	return ret;
+	return simple_read_from_buffer(buf, len, pos, &info,
+				sizeof(info));
 }
 
 static const struct file_operations spufs_dma_info_fops = {
@@ -2149,13 +2177,31 @@ static const struct file_operations spufs_dma_info_fops = {
 	.llseek = no_llseek,
 };
 
+static void spufs_get_proxydma_info(struct spu_context *ctx,
+		struct spu_proxydma_info *info)
+{
+	int i;
+
+	info->proxydma_info_type = ctx->csa.prob.dma_querytype_RW;
+	info->proxydma_info_mask = ctx->csa.prob.dma_querymask_RW;
+	info->proxydma_info_status = ctx->csa.prob.dma_tagstatus_R;
+
+	for (i = 0; i < 8; i++) {
+		struct mfc_cq_sr *qp = &info->proxydma_info_command_data[i];
+		struct mfc_cq_sr *puqp = &ctx->csa.priv2.puq[i];
+
+		qp->mfc_cq_data0_RW = puqp->mfc_cq_data0_RW;
+		qp->mfc_cq_data1_RW = puqp->mfc_cq_data1_RW;
+		qp->mfc_cq_data2_RW = puqp->mfc_cq_data2_RW;
+		qp->mfc_cq_data3_RW = puqp->mfc_cq_data3_RW;
+	}
+}
+
 static ssize_t __spufs_proxydma_info_read(struct spu_context *ctx,
 			char __user *buf, size_t len, loff_t *pos)
 {
 	struct spu_proxydma_info info;
-	struct mfc_cq_sr *qp, *puqp;
 	int ret = sizeof info;
-	int i;
 
 	if (len < ret)
 		return -EINVAL;
@@ -2163,18 +2209,7 @@ static ssize_t __spufs_proxydma_info_read(struct spu_context *ctx,
 	if (!access_ok(VERIFY_WRITE, buf, len))
 		return -EFAULT;
 
-	info.proxydma_info_type = ctx->csa.prob.dma_querytype_RW;
-	info.proxydma_info_mask = ctx->csa.prob.dma_querymask_RW;
-	info.proxydma_info_status = ctx->csa.prob.dma_tagstatus_R;
-	for (i = 0; i < 8; i++) {
-		qp = &info.proxydma_info_command_data[i];
-		puqp = &ctx->csa.priv2.puq[i];
-
-		qp->mfc_cq_data0_RW = puqp->mfc_cq_data0_RW;
-		qp->mfc_cq_data1_RW = puqp->mfc_cq_data1_RW;
-		qp->mfc_cq_data2_RW = puqp->mfc_cq_data2_RW;
-		qp->mfc_cq_data3_RW = puqp->mfc_cq_data3_RW;
-	}
+	spufs_get_proxydma_info(ctx, &info);
 
 	return simple_read_from_buffer(buf, len, pos, &info,
 				sizeof info);
@@ -2184,17 +2219,19 @@ static ssize_t spufs_proxydma_info_read(struct file *file, char __user *buf,
 				   size_t len, loff_t *pos)
 {
 	struct spu_context *ctx = file->private_data;
+	struct spu_proxydma_info info;
 	int ret;
 
 	ret = spu_acquire_saved(ctx);
 	if (ret)
 		return ret;
 	spin_lock(&ctx->csa.register_lock);
-	ret = __spufs_proxydma_info_read(ctx, buf, len, pos);
+	spufs_get_proxydma_info(ctx, &info);
 	spin_unlock(&ctx->csa.register_lock);
 	spu_release_saved(ctx);
 
-	return ret;
+	return simple_read_from_buffer(buf, len, pos, &info,
+				sizeof(info));
 }
 
 static const struct file_operations spufs_proxydma_info_fops = {
-- 
2.25.1

[PATCH AUTOSEL 4.19 054/106] powerpc/spufs: fix copy_to_user while atomic

[Sasha Levin]

From: Jeremy Kerr <jk@ozlabs.org>

[ Upstream commit 88413a6bfbbe2f648df399b62f85c934460b7a4d ]

Currently, we may perform a copy_to_user (through
simple_read_from_buffer()) while holding a context's register_lock,
while accessing the context save area.

This change uses a temporary buffer for the context save area data,
which we then pass to simple_read_from_buffer.

Includes changes from Christoph Hellwig <hch@lst.de>.

Fixes: bf1ab978be23 ("[POWERPC] coredump: Add SPU elf notes to coredump.")
Signed-off-by: Jeremy Kerr <jk@ozlabs.org>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
[hch: renamed to function to avoid ___-prefixes]
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/powerpc/platforms/cell/spufs/file.c | 113 +++++++++++++++--------
 1 file changed, 75 insertions(+), 38 deletions(-)

diff --git a/arch/powerpc/platforms/cell/spufs/file.c b/arch/powerpc/platforms/cell/spufs/file.c
index 43e7b93f27c7..d16adcd93921 100644
--- a/arch/powerpc/platforms/cell/spufs/file.c
+++ b/arch/powerpc/platforms/cell/spufs/file.c
@@ -1991,8 +1991,9 @@ static ssize_t __spufs_mbox_info_read(struct spu_context *ctx,
 static ssize_t spufs_mbox_info_read(struct file *file, char __user *buf,
 				   size_t len, loff_t *pos)
 {
-	int ret;
 	struct spu_context *ctx = file->private_data;
+	u32 stat, data;
+	int ret;
 
 	if (!access_ok(VERIFY_WRITE, buf, len))
 		return -EFAULT;
@@ -2001,11 +2002,16 @@ static ssize_t spufs_mbox_info_read(struct file *file, char __user *buf,
 	if (ret)
 		return ret;
 	spin_lock(&ctx->csa.register_lock);
-	ret = __spufs_mbox_info_read(ctx, buf, len, pos);
+	stat = ctx->csa.prob.mb_stat_R;
+	data = ctx->csa.prob.pu_mb_R;
 	spin_unlock(&ctx->csa.register_lock);
 	spu_release_saved(ctx);
 
-	return ret;
+	/* EOF if there's no entry in the mbox */
+	if (!(stat & 0x0000ff))
+		return 0;
+
+	return simple_read_from_buffer(buf, len, pos, &data, sizeof(data));
 }
 
 static const struct file_operations spufs_mbox_info_fops = {
@@ -2032,6 +2038,7 @@ static ssize_t spufs_ibox_info_read(struct file *file, char __user *buf,
 				   size_t len, loff_t *pos)
 {
 	struct spu_context *ctx = file->private_data;
+	u32 stat, data;
 	int ret;
 
 	if (!access_ok(VERIFY_WRITE, buf, len))
@@ -2041,11 +2048,16 @@ static ssize_t spufs_ibox_info_read(struct file *file, char __user *buf,
 	if (ret)
 		return ret;
 	spin_lock(&ctx->csa.register_lock);
-	ret = __spufs_ibox_info_read(ctx, buf, len, pos);
+	stat = ctx->csa.prob.mb_stat_R;
+	data = ctx->csa.priv2.puint_mb_R;
 	spin_unlock(&ctx->csa.register_lock);
 	spu_release_saved(ctx);
 
-	return ret;
+	/* EOF if there's no entry in the ibox */
+	if (!(stat & 0xff0000))
+		return 0;
+
+	return simple_read_from_buffer(buf, len, pos, &data, sizeof(data));
 }
 
 static const struct file_operations spufs_ibox_info_fops = {
@@ -2054,6 +2066,11 @@ static const struct file_operations spufs_ibox_info_fops = {
 	.llseek  = generic_file_llseek,
 };
 
+static size_t spufs_wbox_info_cnt(struct spu_context *ctx)
+{
+	return (4 - ((ctx->csa.prob.mb_stat_R & 0x00ff00) >> 8)) * sizeof(u32);
+}
+
 static ssize_t __spufs_wbox_info_read(struct spu_context *ctx,
 			char __user *buf, size_t len, loff_t *pos)
 {
@@ -2062,7 +2079,7 @@ static ssize_t __spufs_wbox_info_read(struct spu_context *ctx,
 	u32 wbox_stat;
 
 	wbox_stat = ctx->csa.prob.mb_stat_R;
-	cnt = 4 - ((wbox_stat & 0x00ff00) >> 8);
+	cnt = spufs_wbox_info_cnt(ctx);
 	for (i = 0; i < cnt; i++) {
 		data[i] = ctx->csa.spu_mailbox_data[i];
 	}
@@ -2075,7 +2092,8 @@ static ssize_t spufs_wbox_info_read(struct file *file, char __user *buf,
 				   size_t len, loff_t *pos)
 {
 	struct spu_context *ctx = file->private_data;
-	int ret;
+	u32 data[ARRAY_SIZE(ctx->csa.spu_mailbox_data)];
+	int ret, count;
 
 	if (!access_ok(VERIFY_WRITE, buf, len))
 		return -EFAULT;
@@ -2084,11 +2102,13 @@ static ssize_t spufs_wbox_info_read(struct file *file, char __user *buf,
 	if (ret)
 		return ret;
 	spin_lock(&ctx->csa.register_lock);
-	ret = __spufs_wbox_info_read(ctx, buf, len, pos);
+	count = spufs_wbox_info_cnt(ctx);
+	memcpy(&data, &ctx->csa.spu_mailbox_data, sizeof(data));
 	spin_unlock(&ctx->csa.register_lock);
 	spu_release_saved(ctx);
 
-	return ret;
+	return simple_read_from_buffer(buf, len, pos, &data,
+				count * sizeof(u32));
 }
 
 static const struct file_operations spufs_wbox_info_fops = {
@@ -2097,27 +2117,33 @@ static const struct file_operations spufs_wbox_info_fops = {
 	.llseek  = generic_file_llseek,
 };
 
-static ssize_t __spufs_dma_info_read(struct spu_context *ctx,
-			char __user *buf, size_t len, loff_t *pos)
+static void spufs_get_dma_info(struct spu_context *ctx,
+		struct spu_dma_info *info)
 {
-	struct spu_dma_info info;
-	struct mfc_cq_sr *qp, *spuqp;
 	int i;
 
-	info.dma_info_type = ctx->csa.priv2.spu_tag_status_query_RW;
-	info.dma_info_mask = ctx->csa.lscsa->tag_mask.slot[0];
-	info.dma_info_status = ctx->csa.spu_chnldata_RW[24];
-	info.dma_info_stall_and_notify = ctx->csa.spu_chnldata_RW[25];
-	info.dma_info_atomic_command_status = ctx->csa.spu_chnldata_RW[27];
+	info->dma_info_type = ctx->csa.priv2.spu_tag_status_query_RW;
+	info->dma_info_mask = ctx->csa.lscsa->tag_mask.slot[0];
+	info->dma_info_status = ctx->csa.spu_chnldata_RW[24];
+	info->dma_info_stall_and_notify = ctx->csa.spu_chnldata_RW[25];
+	info->dma_info_atomic_command_status = ctx->csa.spu_chnldata_RW[27];
 	for (i = 0; i < 16; i++) {
-		qp = &info.dma_info_command_data[i];
-		spuqp = &ctx->csa.priv2.spuq[i];
+		struct mfc_cq_sr *qp = &info->dma_info_command_data[i];
+		struct mfc_cq_sr *spuqp = &ctx->csa.priv2.spuq[i];
 
 		qp->mfc_cq_data0_RW = spuqp->mfc_cq_data0_RW;
 		qp->mfc_cq_data1_RW = spuqp->mfc_cq_data1_RW;
 		qp->mfc_cq_data2_RW = spuqp->mfc_cq_data2_RW;
 		qp->mfc_cq_data3_RW = spuqp->mfc_cq_data3_RW;
 	}
+}
+
+static ssize_t __spufs_dma_info_read(struct spu_context *ctx,
+			char __user *buf, size_t len, loff_t *pos)
+{
+	struct spu_dma_info info;
+
+	spufs_get_dma_info(ctx, &info);
 
 	return simple_read_from_buffer(buf, len, pos, &info,
 				sizeof info);
@@ -2127,6 +2153,7 @@ static ssize_t spufs_dma_info_read(struct file *file, char __user *buf,
 			      size_t len, loff_t *pos)
 {
 	struct spu_context *ctx = file->private_data;
+	struct spu_dma_info info;
 	int ret;
 
 	if (!access_ok(VERIFY_WRITE, buf, len))
@@ -2136,11 +2163,12 @@ static ssize_t spufs_dma_info_read(struct file *file, char __user *buf,
 	if (ret)
 		return ret;
 	spin_lock(&ctx->csa.register_lock);
-	ret = __spufs_dma_info_read(ctx, buf, len, pos);
+	spufs_get_dma_info(ctx, &info);
 	spin_unlock(&ctx->csa.register_lock);
 	spu_release_saved(ctx);
 
-	return ret;
+	return simple_read_from_buffer(buf, len, pos, &info,
+				sizeof(info));
 }
 
 static const struct file_operations spufs_dma_info_fops = {
@@ -2149,13 +2177,31 @@ static const struct file_operations spufs_dma_info_fops = {
 	.llseek = no_llseek,
 };
 
+static void spufs_get_proxydma_info(struct spu_context *ctx,
+		struct spu_proxydma_info *info)
+{
+	int i;
+
+	info->proxydma_info_type = ctx->csa.prob.dma_querytype_RW;
+	info->proxydma_info_mask = ctx->csa.prob.dma_querymask_RW;
+	info->proxydma_info_status = ctx->csa.prob.dma_tagstatus_R;
+
+	for (i = 0; i < 8; i++) {
+		struct mfc_cq_sr *qp = &info->proxydma_info_command_data[i];
+		struct mfc_cq_sr *puqp = &ctx->csa.priv2.puq[i];
+
+		qp->mfc_cq_data0_RW = puqp->mfc_cq_data0_RW;
+		qp->mfc_cq_data1_RW = puqp->mfc_cq_data1_RW;
+		qp->mfc_cq_data2_RW = puqp->mfc_cq_data2_RW;
+		qp->mfc_cq_data3_RW = puqp->mfc_cq_data3_RW;
+	}
+}
+
 static ssize_t __spufs_proxydma_info_read(struct spu_context *ctx,
 			char __user *buf, size_t len, loff_t *pos)
 {
 	struct spu_proxydma_info info;
-	struct mfc_cq_sr *qp, *puqp;
 	int ret = sizeof info;
-	int i;
 
 	if (len < ret)
 		return -EINVAL;
@@ -2163,18 +2209,7 @@ static ssize_t __spufs_proxydma_info_read(struct spu_context *ctx,
 	if (!access_ok(VERIFY_WRITE, buf, len))
 		return -EFAULT;
 
-	info.proxydma_info_type = ctx->csa.prob.dma_querytype_RW;
-	info.proxydma_info_mask = ctx->csa.prob.dma_querymask_RW;
-	info.proxydma_info_status = ctx->csa.prob.dma_tagstatus_R;
-	for (i = 0; i < 8; i++) {
-		qp = &info.proxydma_info_command_data[i];
-		puqp = &ctx->csa.priv2.puq[i];
-
-		qp->mfc_cq_data0_RW = puqp->mfc_cq_data0_RW;
-		qp->mfc_cq_data1_RW = puqp->mfc_cq_data1_RW;
-		qp->mfc_cq_data2_RW = puqp->mfc_cq_data2_RW;
-		qp->mfc_cq_data3_RW = puqp->mfc_cq_data3_RW;
-	}
+	spufs_get_proxydma_info(ctx, &info);
 
 	return simple_read_from_buffer(buf, len, pos, &info,
 				sizeof info);
@@ -2184,17 +2219,19 @@ static ssize_t spufs_proxydma_info_read(struct file *file, char __user *buf,
 				   size_t len, loff_t *pos)
 {
 	struct spu_context *ctx = file->private_data;
+	struct spu_proxydma_info info;
 	int ret;
 
 	ret = spu_acquire_saved(ctx);
 	if (ret)
 		return ret;
 	spin_lock(&ctx->csa.register_lock);
-	ret = __spufs_proxydma_info_read(ctx, buf, len, pos);
+	spufs_get_proxydma_info(ctx, &info);
 	spin_unlock(&ctx->csa.register_lock);
 	spu_release_saved(ctx);
 
-	return ret;
+	return simple_read_from_buffer(buf, len, pos, &info,
+				sizeof(info));
 }
 
 static const struct file_operations spufs_proxydma_info_fops = {
-- 
2.25.1

[PATCH AUTOSEL 4.19 055/106] ath9k_htc: Silence undersized packet warnings

[Sasha Levin]

From: Masashi Honma <masashi.honma@gmail.com>

[ Upstream commit 450edd2805982d14ed79733a82927d2857b27cac ]

Some devices like TP-Link TL-WN722N produces this kind of messages
frequently.

kernel: ath: phy0: Short RX data len, dropping (dlen: 4)

This warning is useful for developers to recognize that the device
(Wi-Fi dongle or USB hub etc) is noisy but not for general users. So
this patch make this warning to debug message.

Reported-By: Denis <pro.denis@protonmail.com>
Ref: https://bugzilla.kernel.org/show_bug.cgi?id=207539
Fixes: cd486e627e67 ("ath9k_htc: Discard undersized packets")
Signed-off-by: Masashi Honma <masashi.honma@gmail.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20200504214443.4485-1-masashi.honma@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/wireless/ath/ath9k/htc_drv_txrx.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/drivers/net/wireless/ath/ath9k/htc_drv_txrx.c b/drivers/net/wireless/ath/ath9k/htc_drv_txrx.c
index b5d7ef4da17f..f19393e584dc 100644
--- a/drivers/net/wireless/ath/ath9k/htc_drv_txrx.c
+++ b/drivers/net/wireless/ath/ath9k/htc_drv_txrx.c
@@ -999,9 +999,9 @@ static bool ath9k_rx_prepare(struct ath9k_htc_priv *priv,
 	 * which are not PHY_ERROR (short radar pulses have a length of 3)
 	 */
 	if (unlikely(!rs_datalen || (rs_datalen < 10 && !is_phyerr))) {
-		ath_warn(common,
-			 "Short RX data len, dropping (dlen: %d)\n",
-			 rs_datalen);
+		ath_dbg(common, ANY,
+			"Short RX data len, dropping (dlen: %d)\n",
+			rs_datalen);
 		goto rx_next;
 	}
 
-- 
2.25.1

[PATCH AUTOSEL 4.19 056/106] xfs: clean up the error handling in xfs_swap_extents

[Sasha Levin]

From: "Darrick J. Wong" <darrick.wong@oracle.com>

[ Upstream commit 8bc3b5e4b70d28f8edcafc3c9e4de515998eea9e ]

Make sure we release resources properly if we cannot clean out the COW
extents in preparation for an extent swap.

Fixes: 96987eea537d6c ("xfs: cancel COW blocks before swapext")
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 fs/xfs/xfs_bmap_util.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/fs/xfs/xfs_bmap_util.c b/fs/xfs/xfs_bmap_util.c
index e638740f1681..3e1dd66bd676 100644
--- a/fs/xfs/xfs_bmap_util.c
+++ b/fs/xfs/xfs_bmap_util.c
@@ -1823,7 +1823,7 @@ xfs_swap_extents(
 	if (xfs_inode_has_cow_data(tip)) {
 		error = xfs_reflink_cancel_cow_range(tip, 0, NULLFILEOFF, true);
 		if (error)
-			return error;
+			goto out_unlock;
 	}
 
 	/*
-- 
2.25.1

[PATCH AUTOSEL 4.19 057/106] Crypto/chcr: fix for ccm(aes) failed test

[Sasha Levin]

From: Devulapally Shiva Krishna <shiva@chelsio.com>

[ Upstream commit 10b0c75d7bc19606fa9a62c8ab9180e95c0e0385 ]

The ccm(aes) test fails when req->assoclen > ~240bytes.

The problem is the value assigned to auth_offset is wrong.
As auth_offset is unsigned char, it can take max value as 255.
So fix it by making it unsigned int.

Signed-off-by: Ayush Sawal <ayush.sawal@chelsio.com>
Signed-off-by: Devulapally Shiva Krishna <shiva@chelsio.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/crypto/chelsio/chcr_algo.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/crypto/chelsio/chcr_algo.c b/drivers/crypto/chelsio/chcr_algo.c
index c435f89f34e3..9b3c259f081d 100644
--- a/drivers/crypto/chelsio/chcr_algo.c
+++ b/drivers/crypto/chelsio/chcr_algo.c
@@ -2764,7 +2764,7 @@ static void fill_sec_cpl_for_aead(struct cpl_tx_sec_pdu *sec_cpl,
 	unsigned int mac_mode = CHCR_SCMD_AUTH_MODE_CBCMAC;
 	unsigned int c_id = a_ctx(tfm)->dev->rx_channel_id;
 	unsigned int ccm_xtra;
-	unsigned char tag_offset = 0, auth_offset = 0;
+	unsigned int tag_offset = 0, auth_offset = 0;
 	unsigned int assoclen;
 
 	if (get_aead_subtype(tfm) == CRYPTO_ALG_SUB_TYPE_AEAD_RFC4309)
-- 
2.25.1

[PATCH AUTOSEL 4.19 058/106] MIPS: Truncate link address into 32bit for 32bit kernel

[Sasha Levin]

From: Jiaxun Yang <jiaxun.yang@flygoat.com>

[ Upstream commit ff487d41036035376e47972c7c522490b839ab37 ]

LLD failed to link vmlinux with 64bit load address for 32bit ELF
while bfd will strip 64bit address into 32bit silently.
To fix LLD build, we should truncate load address provided by platform
into 32bit for 32bit kernel.

Signed-off-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Link: https://github.com/ClangBuiltLinux/linux/issues/786
Link: https://sourceware.org/bugzilla/show_bug.cgi?id=25784
Reviewed-by: Fangrui Song <maskray@google.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Tested-by: Nathan Chancellor <natechancellor@gmail.com>
Cc: Maciej W. Rozycki <macro@linux-mips.org>
Tested-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/mips/Makefile                 | 13 ++++++++++++-
 arch/mips/boot/compressed/Makefile |  2 +-
 arch/mips/kernel/vmlinux.lds.S     |  2 +-
 3 files changed, 14 insertions(+), 3 deletions(-)

diff --git a/arch/mips/Makefile b/arch/mips/Makefile
index ad0a92f95af1..63e2ad43bd6a 100644
--- a/arch/mips/Makefile
+++ b/arch/mips/Makefile
@@ -290,12 +290,23 @@ ifdef CONFIG_64BIT
   endif
 endif
 
+# When linking a 32-bit executable the LLVM linker cannot cope with a
+# 32-bit load address that has been sign-extended to 64 bits.  Simply
+# remove the upper 32 bits then, as it is safe to do so with other
+# linkers.
+ifdef CONFIG_64BIT
+	load-ld			= $(load-y)
+else
+	load-ld			= $(subst 0xffffffff,0x,$(load-y))
+endif
+
 KBUILD_AFLAGS	+= $(cflags-y)
 KBUILD_CFLAGS	+= $(cflags-y)
-KBUILD_CPPFLAGS += -DVMLINUX_LOAD_ADDRESS=$(load-y)
+KBUILD_CPPFLAGS += -DVMLINUX_LOAD_ADDRESS=$(load-y) -DLINKER_LOAD_ADDRESS=$(load-ld)
 KBUILD_CPPFLAGS += -DDATAOFFSET=$(if $(dataoffset-y),$(dataoffset-y),0)
 
 bootvars-y	= VMLINUX_LOAD_ADDRESS=$(load-y) \
+		  LINKER_LOAD_ADDRESS=$(load-ld) \
 		  VMLINUX_ENTRY_ADDRESS=$(entry-y) \
 		  PLATFORM="$(platform-y)" \
 		  ITS_INPUTS="$(its-y)"
diff --git a/arch/mips/boot/compressed/Makefile b/arch/mips/boot/compressed/Makefile
index d859f079b771..378cbfb31ee7 100644
--- a/arch/mips/boot/compressed/Makefile
+++ b/arch/mips/boot/compressed/Makefile
@@ -90,7 +90,7 @@ ifneq ($(zload-y),)
 VMLINUZ_LOAD_ADDRESS := $(zload-y)
 else
 VMLINUZ_LOAD_ADDRESS = $(shell $(obj)/calc_vmlinuz_load_addr \
-		$(obj)/vmlinux.bin $(VMLINUX_LOAD_ADDRESS))
+		$(obj)/vmlinux.bin $(LINKER_LOAD_ADDRESS))
 endif
 UIMAGE_LOADADDR = $(VMLINUZ_LOAD_ADDRESS)
 
diff --git a/arch/mips/kernel/vmlinux.lds.S b/arch/mips/kernel/vmlinux.lds.S
index 36f2e860ba3e..be63fff95b2a 100644
--- a/arch/mips/kernel/vmlinux.lds.S
+++ b/arch/mips/kernel/vmlinux.lds.S
@@ -50,7 +50,7 @@ SECTIONS
 	/* . = 0xa800000000300000; */
 	. = 0xffffffff80300000;
 #endif
-	. = VMLINUX_LOAD_ADDRESS;
+	. = LINKER_LOAD_ADDRESS;
 	/* read-only */
 	_text = .;	/* Text and read-only data */
 	.text : {
-- 
2.25.1

[PATCH AUTOSEL 4.19 059/106] mips: cm: Fix an invalid error code of INTVN_*_ERR

[Sasha Levin]

From: Serge Semin <Sergey.Semin@baikalelectronics.ru>

[ Upstream commit 8a0efb8b101665a843205eab3d67ab09cb2d9a8d ]

Commit 3885c2b463f6 ("MIPS: CM: Add support for reporting CM cache
errors") adds cm2_causes[] array with map of error type ID and
pointers to the short description string. There is a mistake in
the table, since according to MIPS32 manual CM2_ERROR_TYPE = {17,18}
correspond to INTVN_WR_ERR and INTVN_RD_ERR, while the table
claims they have {0x17,0x18} codes. This is obviously hex-dec
copy-paste bug. Moreover codes {0x18 - 0x1a} indicate L2 ECC errors.

Fixes: 3885c2b463f6 ("MIPS: CM: Add support for reporting CM cache errors")
Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru>
Cc: Alexey Malahov <Alexey.Malahov@baikalelectronics.ru>
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Cc: Paul Burton <paulburton@kernel.org>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Rob Herring <robh+dt@kernel.org>
Cc: linux-pm@vger.kernel.org
Cc: devicetree@vger.kernel.org
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/mips/kernel/mips-cm.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/arch/mips/kernel/mips-cm.c b/arch/mips/kernel/mips-cm.c
index 7f3f136572de..50d3d74001cb 100644
--- a/arch/mips/kernel/mips-cm.c
+++ b/arch/mips/kernel/mips-cm.c
@@ -123,9 +123,9 @@ static char *cm2_causes[32] = {
 	"COH_RD_ERR", "MMIO_WR_ERR", "MMIO_RD_ERR", "0x07",
 	"0x08", "0x09", "0x0a", "0x0b",
 	"0x0c", "0x0d", "0x0e", "0x0f",
-	"0x10", "0x11", "0x12", "0x13",
-	"0x14", "0x15", "0x16", "INTVN_WR_ERR",
-	"INTVN_RD_ERR", "0x19", "0x1a", "0x1b",
+	"0x10", "INTVN_WR_ERR", "INTVN_RD_ERR", "0x13",
+	"0x14", "0x15", "0x16", "0x17",
+	"0x18", "0x19", "0x1a", "0x1b",
 	"0x1c", "0x1d", "0x1e", "0x1f"
 };
 
-- 
2.25.1

[PATCH AUTOSEL 4.19 060/106] kgdb: Fix spurious true from in_dbg_master()

[Sasha Levin]

From: Daniel Thompson <daniel.thompson@linaro.org>

[ Upstream commit 3fec4aecb311995189217e64d725cfe84a568de3 ]

Currently there is a small window where a badly timed migration could
cause in_dbg_master() to spuriously return true. Specifically if we
migrate to a new core after reading the processor id and the previous
core takes a breakpoint then we will evaluate true if we read
kgdb_active before we get the IPI to bring us to halt.

Fix this by checking irqs_disabled() first. Interrupts are always
disabled when we are executing the kgdb trap so this is an acceptable
prerequisite. This also allows us to replace raw_smp_processor_id()
with smp_processor_id() since the short circuit logic will prevent
warnings from PREEMPT_DEBUG.

Fixes: dcc7871128e9 ("kgdb: core changes to support kdb")
Suggested-by: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/20200506164223.2875760-1-daniel.thompson@linaro.org
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Daniel Thompson <daniel.thompson@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 include/linux/kgdb.h | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/include/linux/kgdb.h b/include/linux/kgdb.h
index e465bb15912d..6be5545d3584 100644
--- a/include/linux/kgdb.h
+++ b/include/linux/kgdb.h
@@ -317,7 +317,7 @@ extern void gdbstub_exit(int status);
 extern int			kgdb_single_step;
 extern atomic_t			kgdb_active;
 #define in_dbg_master() \
-	(raw_smp_processor_id() == atomic_read(&kgdb_active))
+	(irqs_disabled() && (smp_processor_id() == atomic_read(&kgdb_active)))
 extern bool dbg_is_early;
 extern void __init dbg_late_init(void);
 #else /* ! CONFIG_KGDB */
-- 
2.25.1

[PATCH AUTOSEL 4.19 061/106] xfs: reset buffer write failure state on successful completion

[Sasha Levin]

From: Brian Foster <bfoster@redhat.com>

[ Upstream commit b6983e80b03bd4fd42de71993b3ac7403edac758 ]

The buffer write failure flag is intended to control the internal
write retry that XFS has historically implemented to help mitigate
the severity of transient I/O errors. The flag is set when a buffer
is resubmitted from the I/O completion path due to a previous
failure. It is checked on subsequent I/O completions to skip the
internal retry and fall through to the higher level configurable
error handling mechanism. The flag is cleared in the synchronous and
delwri submission paths and also checked in various places to log
write failure messages.

There are a couple minor problems with the current usage of this
flag. One is that we issue an internal retry after every submission
from xfsaild due to how delwri submission clears the flag. This
results in double the expected or configured number of write
attempts when under sustained failures. Another more subtle issue is
that the flag is never cleared on successful I/O completion. This
can cause xfs_wait_buftarg() to suggest that dirty buffers are being
thrown away due to the existence of the flag, when the reality is
that the flag might still be set because the write succeeded on the
retry.

Clear the write failure flag on successful I/O completion to address
both of these problems. This means that the internal retry attempt
occurs once since the last time a buffer write failed and that
various other contexts only see the flag set when the immediately
previous write attempt has failed.

Signed-off-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Allison Collins <allison.henderson@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 fs/xfs/xfs_buf.c | 8 +++++---
 1 file changed, 5 insertions(+), 3 deletions(-)

diff --git a/fs/xfs/xfs_buf.c b/fs/xfs/xfs_buf.c
index c1f7c0d5d608..b33a9cd4fe94 100644
--- a/fs/xfs/xfs_buf.c
+++ b/fs/xfs/xfs_buf.c
@@ -1202,8 +1202,10 @@ xfs_buf_ioend(
 		bp->b_ops->verify_read(bp);
 	}
 
-	if (!bp->b_error)
+	if (!bp->b_error) {
+		bp->b_flags &= ~XBF_WRITE_FAIL;
 		bp->b_flags |= XBF_DONE;
+	}
 
 	if (bp->b_iodone)
 		(*(bp->b_iodone))(bp);
@@ -1263,7 +1265,7 @@ xfs_bwrite(
 
 	bp->b_flags |= XBF_WRITE;
 	bp->b_flags &= ~(XBF_ASYNC | XBF_READ | _XBF_DELWRI_Q |
-			 XBF_WRITE_FAIL | XBF_DONE);
+			 XBF_DONE);
 
 	error = xfs_buf_submit(bp);
 	if (error) {
@@ -2000,7 +2002,7 @@ xfs_buf_delwri_submit_buffers(
 		 * synchronously. Otherwise, drop the buffer from the delwri
 		 * queue and submit async.
 		 */
-		bp->b_flags &= ~(_XBF_DELWRI_Q | XBF_WRITE_FAIL);
+		bp->b_flags &= ~_XBF_DELWRI_Q;
 		bp->b_flags |= XBF_WRITE;
 		if (wait_list) {
 			bp->b_flags &= ~XBF_ASYNC;
-- 
2.25.1

[PATCH AUTOSEL 4.19 062/106] xfs: fix duplicate verification from xfs_qm_dqflush()

[Sasha Levin]

From: Brian Foster <bfoster@redhat.com>

[ Upstream commit 629dcb38dc351947ed6a26a997d4b587f3bd5c7e ]

The pre-flush dquot verification in xfs_qm_dqflush() duplicates the
read verifier by checking the dquot in the on-disk buffer. Instead,
verify the in-core variant before it is flushed to the buffer.

Fixes: 7224fa482a6d ("xfs: add full xfs_dqblk verifier")
Signed-off-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Allison Collins <allison.henderson@oracle.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 fs/xfs/xfs_dquot.c | 9 ++++-----
 1 file changed, 4 insertions(+), 5 deletions(-)

diff --git a/fs/xfs/xfs_dquot.c b/fs/xfs/xfs_dquot.c
index a1af984e4913..59b2b29542f4 100644
--- a/fs/xfs/xfs_dquot.c
+++ b/fs/xfs/xfs_dquot.c
@@ -1120,13 +1120,12 @@ xfs_qm_dqflush(
 	dqb = bp->b_addr + dqp->q_bufoffset;
 	ddqp = &dqb->dd_diskdq;
 
-	/*
-	 * A simple sanity check in case we got a corrupted dquot.
-	 */
-	fa = xfs_dqblk_verify(mp, dqb, be32_to_cpu(ddqp->d_id), 0);
+	/* sanity check the in-core structure before we flush */
+	fa = xfs_dquot_verify(mp, &dqp->q_core, be32_to_cpu(dqp->q_core.d_id),
+			      0);
 	if (fa) {
 		xfs_alert(mp, "corrupt dquot ID 0x%x in memory at %pS",
-				be32_to_cpu(ddqp->d_id), fa);
+				be32_to_cpu(dqp->q_core.d_id), fa);
 		xfs_buf_relse(bp);
 		xfs_dqfunlock(dqp);
 		xfs_force_shutdown(mp, SHUTDOWN_CORRUPT_INCORE);
-- 
2.25.1

[PATCH AUTOSEL 4.19 063/106] platform/x86: intel-vbtn: Use acpi_evaluate_integer()

[Sasha Levin]

From: Hans de Goede <hdegoede@redhat.com>

[ Upstream commit 18937875a231d831c309716d6d8fc358f8381881 ]

Use acpi_evaluate_integer() instead of open-coding it.

This is a preparation patch for adding a intel_vbtn_has_switches()
helper function.

Fixes: de9647efeaa9 ("platform/x86: intel-vbtn: Only activate tablet mode switch on 2-in-1's")
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/platform/x86/intel-vbtn.c | 19 ++++++-------------
 1 file changed, 6 insertions(+), 13 deletions(-)

diff --git a/drivers/platform/x86/intel-vbtn.c b/drivers/platform/x86/intel-vbtn.c
index a0d0cecff55f..0bcfa20dd614 100644
--- a/drivers/platform/x86/intel-vbtn.c
+++ b/drivers/platform/x86/intel-vbtn.c
@@ -118,28 +118,21 @@ static void detect_tablet_mode(struct platform_device *device)
 	const char *chassis_type = dmi_get_system_info(DMI_CHASSIS_TYPE);
 	struct intel_vbtn_priv *priv = dev_get_drvdata(&device->dev);
 	acpi_handle handle = ACPI_HANDLE(&device->dev);
-	struct acpi_buffer vgbs_output = { ACPI_ALLOCATE_BUFFER, NULL };
-	union acpi_object *obj;
+	unsigned long long vgbs;
 	acpi_status status;
 	int m;
 
 	if (!(chassis_type && strcmp(chassis_type, "31") == 0))
-		goto out;
+		return;
 
-	status = acpi_evaluate_object(handle, "VGBS", NULL, &vgbs_output);
+	status = acpi_evaluate_integer(handle, "VGBS", NULL, &vgbs);
 	if (ACPI_FAILURE(status))
-		goto out;
-
-	obj = vgbs_output.pointer;
-	if (!(obj && obj->type == ACPI_TYPE_INTEGER))
-		goto out;
+		return;
 
-	m = !(obj->integer.value & TABLET_MODE_FLAG);
+	m = !(vgbs & TABLET_MODE_FLAG);
 	input_report_switch(priv->input_dev, SW_TABLET_MODE, m);
-	m = (obj->integer.value & DOCK_MODE_FLAG) ? 1 : 0;
+	m = (vgbs & DOCK_MODE_FLAG) ? 1 : 0;
 	input_report_switch(priv->input_dev, SW_DOCK, m);
-out:
-	kfree(vgbs_output.pointer);
 }
 
 static int intel_vbtn_probe(struct platform_device *device)
-- 
2.25.1

[PATCH AUTOSEL 4.19 064/106] platform/x86: intel-vbtn: Split keymap into buttons and switches parts

[Sasha Levin]

From: Hans de Goede <hdegoede@redhat.com>

[ Upstream commit f6ba524970c4b73b234bf41ecd6628f5803b1559 ]

Split the sparse keymap into 2 separate keymaps, a buttons and a switches
keymap and combine the 2 to a single map again in intel_vbtn_input_setup().

This is a preparation patch for not telling userspace that we have switches
when we do not have them (and for doing the same for the buttons).

Fixes: de9647efeaa9 ("platform/x86: intel-vbtn: Only activate tablet mode switch on 2-in-1's")
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/platform/x86/intel-vbtn.c | 28 +++++++++++++++++++++++++---
 1 file changed, 25 insertions(+), 3 deletions(-)

diff --git a/drivers/platform/x86/intel-vbtn.c b/drivers/platform/x86/intel-vbtn.c
index 0bcfa20dd614..e42203776727 100644
--- a/drivers/platform/x86/intel-vbtn.c
+++ b/drivers/platform/x86/intel-vbtn.c
@@ -39,14 +39,20 @@ static const struct key_entry intel_vbtn_keymap[] = {
 	{ KE_IGNORE, 0xC7, { KEY_VOLUMEDOWN } },	/* volume-down key release */
 	{ KE_KEY,    0xC8, { KEY_ROTATE_LOCK_TOGGLE } },	/* rotate-lock key press */
 	{ KE_KEY,    0xC9, { KEY_ROTATE_LOCK_TOGGLE } },	/* rotate-lock key release */
+};
+
+static const struct key_entry intel_vbtn_switchmap[] = {
 	{ KE_SW,     0xCA, { .sw = { SW_DOCK, 1 } } },		/* Docked */
 	{ KE_SW,     0xCB, { .sw = { SW_DOCK, 0 } } },		/* Undocked */
 	{ KE_SW,     0xCC, { .sw = { SW_TABLET_MODE, 1 } } },	/* Tablet */
 	{ KE_SW,     0xCD, { .sw = { SW_TABLET_MODE, 0 } } },	/* Laptop */
-	{ KE_END },
 };
 
+#define KEYMAP_LEN \
+	(ARRAY_SIZE(intel_vbtn_keymap) + ARRAY_SIZE(intel_vbtn_switchmap) + 1)
+
 struct intel_vbtn_priv {
+	struct key_entry keymap[KEYMAP_LEN];
 	struct input_dev *input_dev;
 	bool wakeup_mode;
 };
@@ -54,13 +60,29 @@ struct intel_vbtn_priv {
 static int intel_vbtn_input_setup(struct platform_device *device)
 {
 	struct intel_vbtn_priv *priv = dev_get_drvdata(&device->dev);
-	int ret;
+	int ret, keymap_len = 0;
+
+	if (true) {
+		memcpy(&priv->keymap[keymap_len], intel_vbtn_keymap,
+		       ARRAY_SIZE(intel_vbtn_keymap) *
+		       sizeof(struct key_entry));
+		keymap_len += ARRAY_SIZE(intel_vbtn_keymap);
+	}
+
+	if (true) {
+		memcpy(&priv->keymap[keymap_len], intel_vbtn_switchmap,
+		       ARRAY_SIZE(intel_vbtn_switchmap) *
+		       sizeof(struct key_entry));
+		keymap_len += ARRAY_SIZE(intel_vbtn_switchmap);
+	}
+
+	priv->keymap[keymap_len].type = KE_END;
 
 	priv->input_dev = devm_input_allocate_device(&device->dev);
 	if (!priv->input_dev)
 		return -ENOMEM;
 
-	ret = sparse_keymap_setup(priv->input_dev, intel_vbtn_keymap, NULL);
+	ret = sparse_keymap_setup(priv->input_dev, priv->keymap, NULL);
 	if (ret)
 		return ret;
 
-- 
2.25.1

[PATCH AUTOSEL 4.19 065/106] platform/x86: intel-vbtn: Do not advertise switches to userspace if they are not there

[Sasha Levin]

From: Hans de Goede <hdegoede@redhat.com>

[ Upstream commit 990fbb48067bf8cfa34b7d1e6e1674eaaef2f450 ]

Commit de9647efeaa9 ("platform/x86: intel-vbtn: Only activate tablet mode
switch on 2-in-1's") added a DMI chassis-type check to avoid accidentally
reporting SW_TABLET_MODE = 1 to userspace on laptops (specifically on the
Dell XPS 9360), to avoid e.g. userspace ignoring touchpad events because
userspace thought the device was in tablet-mode.

But if we are not getting the initial status of the switch because the
device does not have a tablet mode, then we really should not advertise
the presence of a tablet-mode switch to userspace at all, as userspace may
use the mere presence of this switch for certain heuristics.

Fixes: de9647efeaa9 ("platform/x86: intel-vbtn: Only activate tablet mode switch on 2-in-1's")
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/platform/x86/intel-vbtn.c | 25 +++++++++++++++++++------
 1 file changed, 19 insertions(+), 6 deletions(-)

diff --git a/drivers/platform/x86/intel-vbtn.c b/drivers/platform/x86/intel-vbtn.c
index e42203776727..23cda7aa96cd 100644
--- a/drivers/platform/x86/intel-vbtn.c
+++ b/drivers/platform/x86/intel-vbtn.c
@@ -54,6 +54,7 @@ static const struct key_entry intel_vbtn_switchmap[] = {
 struct intel_vbtn_priv {
 	struct key_entry keymap[KEYMAP_LEN];
 	struct input_dev *input_dev;
+	bool has_switches;
 	bool wakeup_mode;
 };
 
@@ -69,7 +70,7 @@ static int intel_vbtn_input_setup(struct platform_device *device)
 		keymap_len += ARRAY_SIZE(intel_vbtn_keymap);
 	}
 
-	if (true) {
+	if (priv->has_switches) {
 		memcpy(&priv->keymap[keymap_len], intel_vbtn_switchmap,
 		       ARRAY_SIZE(intel_vbtn_switchmap) *
 		       sizeof(struct key_entry));
@@ -137,16 +138,12 @@ static void notify_handler(acpi_handle handle, u32 event, void *context)
 
 static void detect_tablet_mode(struct platform_device *device)
 {
-	const char *chassis_type = dmi_get_system_info(DMI_CHASSIS_TYPE);
 	struct intel_vbtn_priv *priv = dev_get_drvdata(&device->dev);
 	acpi_handle handle = ACPI_HANDLE(&device->dev);
 	unsigned long long vgbs;
 	acpi_status status;
 	int m;
 
-	if (!(chassis_type && strcmp(chassis_type, "31") == 0))
-		return;
-
 	status = acpi_evaluate_integer(handle, "VGBS", NULL, &vgbs);
 	if (ACPI_FAILURE(status))
 		return;
@@ -157,6 +154,19 @@ static void detect_tablet_mode(struct platform_device *device)
 	input_report_switch(priv->input_dev, SW_DOCK, m);
 }
 
+static bool intel_vbtn_has_switches(acpi_handle handle)
+{
+	const char *chassis_type = dmi_get_system_info(DMI_CHASSIS_TYPE);
+	unsigned long long vgbs;
+	acpi_status status;
+
+	if (!(chassis_type && strcmp(chassis_type, "31") == 0))
+		return false;
+
+	status = acpi_evaluate_integer(handle, "VGBS", NULL, &vgbs);
+	return ACPI_SUCCESS(status);
+}
+
 static int intel_vbtn_probe(struct platform_device *device)
 {
 	acpi_handle handle = ACPI_HANDLE(&device->dev);
@@ -175,13 +185,16 @@ static int intel_vbtn_probe(struct platform_device *device)
 		return -ENOMEM;
 	dev_set_drvdata(&device->dev, priv);
 
+	priv->has_switches = intel_vbtn_has_switches(handle);
+
 	err = intel_vbtn_input_setup(device);
 	if (err) {
 		pr_err("Failed to setup Intel Virtual Button\n");
 		return err;
 	}
 
-	detect_tablet_mode(device);
+	if (priv->has_switches)
+		detect_tablet_mode(device);
 
 	status = acpi_install_notify_handler(handle,
 					     ACPI_DEVICE_NOTIFY,
-- 
2.25.1

[PATCH AUTOSEL 4.19 066/106] platform/x86: intel-vbtn: Also handle tablet-mode switch on "Detachable" and "Portable" chassis-types

[Sasha Levin]

From: Hans de Goede <hdegoede@redhat.com>

[ Upstream commit 1fac39fd0316b19c3e57a182524332332d1643ce ]

Commit de9647efeaa9 ("platform/x86: intel-vbtn: Only activate tablet mode
switch on 2-in-1's") added a DMI chassis-type check to avoid accidentally
reporting SW_TABLET_MODE = 1 to userspace on laptops.

Some devices with a detachable keyboard and using the intel-vbnt (INT33D6)
interface to report if they are in tablet mode (keyboard detached) or not,
report 32 / "Detachable" as chassis-type, e.g. the HP Pavilion X2 series.

Other devices with a detachable keyboard and using the intel-vbnt (INT33D6)
interface to report SW_TABLET_MODE, report 8 / "Portable" as chassis-type.
The Dell Venue 11 Pro 7130 is an example of this.

Extend the DMI chassis-type check to also accept Portables and Detachables
so that the intel-vbtn driver will report SW_TABLET_MODE on these devices.

Note the chassis-type check was originally added to avoid a false-positive
tablet-mode report on the Dell XPS 9360 laptop. To the best of my knowledge
that laptop is using a chassis-type of 9 / "Laptop", so after this commit
we still ignore the tablet-switch for that chassis-type.

Fixes: de9647efeaa9 ("platform/x86: intel-vbtn: Only activate tablet mode switch on 2-in-1's")
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Mario Limonciello <Mario.limonciello@dell.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/platform/x86/intel-vbtn.c | 12 +++++++++++-
 1 file changed, 11 insertions(+), 1 deletion(-)

diff --git a/drivers/platform/x86/intel-vbtn.c b/drivers/platform/x86/intel-vbtn.c
index 23cda7aa96cd..5f8120d12859 100644
--- a/drivers/platform/x86/intel-vbtn.c
+++ b/drivers/platform/x86/intel-vbtn.c
@@ -157,12 +157,22 @@ static void detect_tablet_mode(struct platform_device *device)
 static bool intel_vbtn_has_switches(acpi_handle handle)
 {
 	const char *chassis_type = dmi_get_system_info(DMI_CHASSIS_TYPE);
+	unsigned long chassis_type_int;
 	unsigned long long vgbs;
 	acpi_status status;
 
-	if (!(chassis_type && strcmp(chassis_type, "31") == 0))
+	if (kstrtoul(chassis_type, 10, &chassis_type_int))
 		return false;
 
+	switch (chassis_type_int) {
+	case  8: /* Portable */
+	case 31: /* Convertible */
+	case 32: /* Detachable */
+		break;
+	default:
+		return false;
+	}
+
 	status = acpi_evaluate_integer(handle, "VGBS", NULL, &vgbs);
 	return ACPI_SUCCESS(status);
 }
-- 
2.25.1

[PATCH AUTOSEL 4.19 067/106] nvme: refine the Qemu Identify CNS quirk

[Sasha Levin]

From: Christoph Hellwig <hch@lst.de>

[ Upstream commit b9a5c3d4c34d8bd9fd75f7f28d18a57cb68da237 ]

Add a helper to check if we can use Identify CNS values > 1, and refine
the Qemu quirk to not apply to reported versions larger than 1.1, as the
Qemu implementation had been fixed by then.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Keith Busch <kbusch@kernel.org>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/nvme/host/core.c | 16 ++++++++++++++--
 1 file changed, 14 insertions(+), 2 deletions(-)

diff --git a/drivers/nvme/host/core.c b/drivers/nvme/host/core.c
index d5359c7c811a..0d60f2f8f3ee 100644
--- a/drivers/nvme/host/core.c
+++ b/drivers/nvme/host/core.c
@@ -926,6 +926,19 @@ void nvme_stop_keep_alive(struct nvme_ctrl *ctrl)
 }
 EXPORT_SYMBOL_GPL(nvme_stop_keep_alive);
 
+/*
+ * In NVMe 1.0 the CNS field was just a binary controller or namespace
+ * flag, thus sending any new CNS opcodes has a big chance of not working.
+ * Qemu unfortunately had that bug after reporting a 1.1 version compliance
+ * (but not for any later version).
+ */
+static bool nvme_ctrl_limited_cns(struct nvme_ctrl *ctrl)
+{
+	if (ctrl->quirks & NVME_QUIRK_IDENTIFY_CNS)
+		return ctrl->vs < NVME_VS(1, 2, 0);
+	return ctrl->vs < NVME_VS(1, 1, 0);
+}
+
 static int nvme_identify_ctrl(struct nvme_ctrl *dev, struct nvme_id_ctrl **id)
 {
 	struct nvme_command c = { };
@@ -3368,8 +3381,7 @@ static void nvme_scan_work(struct work_struct *work)
 
 	mutex_lock(&ctrl->scan_lock);
 	nn = le32_to_cpu(id->nn);
-	if (ctrl->vs >= NVME_VS(1, 1, 0) &&
-	    !(ctrl->quirks & NVME_QUIRK_IDENTIFY_CNS)) {
+	if (!nvme_ctrl_limited_cns(ctrl)) {
 		if (!nvme_scan_ns_list(ctrl, nn))
 			goto out_free_id;
 	}
-- 
2.25.1

[PATCH AUTOSEL 4.19 067/106] nvme: refine the Qemu Identify CNS quirk

[Sasha Levin]

From: Christoph Hellwig <hch@lst.de>

[ Upstream commit b9a5c3d4c34d8bd9fd75f7f28d18a57cb68da237 ]

Add a helper to check if we can use Identify CNS values > 1, and refine
the Qemu quirk to not apply to reported versions larger than 1.1, as the
Qemu implementation had been fixed by then.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Keith Busch <kbusch@kernel.org>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/nvme/host/core.c | 16 ++++++++++++++--
 1 file changed, 14 insertions(+), 2 deletions(-)

diff --git a/drivers/nvme/host/core.c b/drivers/nvme/host/core.c
index d5359c7c811a..0d60f2f8f3ee 100644
--- a/drivers/nvme/host/core.c
+++ b/drivers/nvme/host/core.c
@@ -926,6 +926,19 @@ void nvme_stop_keep_alive(struct nvme_ctrl *ctrl)
 }
 EXPORT_SYMBOL_GPL(nvme_stop_keep_alive);
 
+/*
+ * In NVMe 1.0 the CNS field was just a binary controller or namespace
+ * flag, thus sending any new CNS opcodes has a big chance of not working.
+ * Qemu unfortunately had that bug after reporting a 1.1 version compliance
+ * (but not for any later version).
+ */
+static bool nvme_ctrl_limited_cns(struct nvme_ctrl *ctrl)
+{
+	if (ctrl->quirks & NVME_QUIRK_IDENTIFY_CNS)
+		return ctrl->vs < NVME_VS(1, 2, 0);
+	return ctrl->vs < NVME_VS(1, 1, 0);
+}
+
 static int nvme_identify_ctrl(struct nvme_ctrl *dev, struct nvme_id_ctrl **id)
 {
 	struct nvme_command c = { };
@@ -3368,8 +3381,7 @@ static void nvme_scan_work(struct work_struct *work)
 
 	mutex_lock(&ctrl->scan_lock);
 	nn = le32_to_cpu(id->nn);
-	if (ctrl->vs >= NVME_VS(1, 1, 0) &&
-	    !(ctrl->quirks & NVME_QUIRK_IDENTIFY_CNS)) {
+	if (!nvme_ctrl_limited_cns(ctrl)) {
 		if (!nvme_scan_ns_list(ctrl, nn))
 			goto out_free_id;
 	}
-- 
2.25.1


_______________________________________________
linux-nvme mailing list
linux-nvme@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-nvme

[PATCH AUTOSEL 4.19 068/106] ath10k: Remove msdu from idr when management pkt send fails

[Sasha Levin]

From: Rakesh Pillai <pillair@codeaurora.org>

[ Upstream commit c730c477176ad4af86d9aae4d360a7ad840b073a ]

Currently when the sending of any management pkt
via wmi command fails, the packet is being unmapped
freed in the error handling. But the idr entry added,
which is used to track these packet is not getting removed.

Hence, during unload, in wmi cleanup, all the entries
in IDR are removed and the corresponding buffer is
attempted to be freed. This can cause a situation where
one packet is attempted to be freed twice.

Fix this error by rmeoving the msdu from the idr
list when the sending of a management packet over
wmi fails.

Tested HW: WCN3990
Tested FW: WLAN.HL.3.1-01040-QCAHLSWMTPLZ-1

Fixes: 1807da49733e ("ath10k: wmi: add management tx by reference support over wmi")
Signed-off-by: Rakesh Pillai <pillair@codeaurora.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/1588667015-25490-1-git-send-email-pillair@codeaurora.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/wireless/ath/ath10k/mac.c     |  3 +++
 drivers/net/wireless/ath/ath10k/wmi-ops.h | 10 ++++++++++
 drivers/net/wireless/ath/ath10k/wmi-tlv.c | 15 +++++++++++++++
 3 files changed, 28 insertions(+)

diff --git a/drivers/net/wireless/ath/ath10k/mac.c b/drivers/net/wireless/ath/ath10k/mac.c
index a09d7a07e90a..81af403c19c2 100644
--- a/drivers/net/wireless/ath/ath10k/mac.c
+++ b/drivers/net/wireless/ath/ath10k/mac.c
@@ -3852,6 +3852,9 @@ void ath10k_mgmt_over_wmi_tx_work(struct work_struct *work)
 			if (ret) {
 				ath10k_warn(ar, "failed to transmit management frame by ref via WMI: %d\n",
 					    ret);
+				/* remove this msdu from idr tracking */
+				ath10k_wmi_cleanup_mgmt_tx_send(ar, skb);
+
 				dma_unmap_single(ar->dev, paddr, skb->len,
 						 DMA_TO_DEVICE);
 				ieee80211_free_txskb(ar->hw, skb);
diff --git a/drivers/net/wireless/ath/ath10k/wmi-ops.h b/drivers/net/wireless/ath/ath10k/wmi-ops.h
index 7fd63bbf8e24..b6cd33fa79f8 100644
--- a/drivers/net/wireless/ath/ath10k/wmi-ops.h
+++ b/drivers/net/wireless/ath/ath10k/wmi-ops.h
@@ -139,6 +139,7 @@ struct wmi_ops {
 	struct sk_buff *(*gen_mgmt_tx_send)(struct ath10k *ar,
 					    struct sk_buff *skb,
 					    dma_addr_t paddr);
+	int (*cleanup_mgmt_tx_send)(struct ath10k *ar, struct sk_buff *msdu);
 	struct sk_buff *(*gen_dbglog_cfg)(struct ath10k *ar, u64 module_enable,
 					  u32 log_level);
 	struct sk_buff *(*gen_pktlog_enable)(struct ath10k *ar, u32 filter);
@@ -431,6 +432,15 @@ ath10k_wmi_get_txbf_conf_scheme(struct ath10k *ar)
 	return ar->wmi.ops->get_txbf_conf_scheme(ar);
 }
 
+static inline int
+ath10k_wmi_cleanup_mgmt_tx_send(struct ath10k *ar, struct sk_buff *msdu)
+{
+	if (!ar->wmi.ops->cleanup_mgmt_tx_send)
+		return -EOPNOTSUPP;
+
+	return ar->wmi.ops->cleanup_mgmt_tx_send(ar, msdu);
+}
+
 static inline int
 ath10k_wmi_mgmt_tx_send(struct ath10k *ar, struct sk_buff *msdu,
 			dma_addr_t paddr)
diff --git a/drivers/net/wireless/ath/ath10k/wmi-tlv.c b/drivers/net/wireless/ath/ath10k/wmi-tlv.c
index 248decb494c2..7f435fa29f75 100644
--- a/drivers/net/wireless/ath/ath10k/wmi-tlv.c
+++ b/drivers/net/wireless/ath/ath10k/wmi-tlv.c
@@ -2638,6 +2638,18 @@ ath10k_wmi_tlv_op_gen_request_stats(struct ath10k *ar, u32 stats_mask)
 	return skb;
 }
 
+static int
+ath10k_wmi_tlv_op_cleanup_mgmt_tx_send(struct ath10k *ar,
+				       struct sk_buff *msdu)
+{
+	struct ath10k_skb_cb *cb = ATH10K_SKB_CB(msdu);
+	struct ath10k_wmi *wmi = &ar->wmi;
+
+	idr_remove(&wmi->mgmt_pending_tx, cb->msdu_id);
+
+	return 0;
+}
+
 static int
 ath10k_wmi_mgmt_tx_alloc_msdu_id(struct ath10k *ar, struct sk_buff *skb,
 				 dma_addr_t paddr)
@@ -2710,6 +2722,8 @@ ath10k_wmi_tlv_op_gen_mgmt_tx_send(struct ath10k *ar, struct sk_buff *msdu,
 	if (desc_id < 0)
 		goto err_free_skb;
 
+	cb->msdu_id = desc_id;
+
 	ptr = (void *)skb->data;
 	tlv = ptr;
 	tlv->tag = __cpu_to_le16(WMI_TLV_TAG_STRUCT_MGMT_TX_CMD);
@@ -3949,6 +3963,7 @@ static const struct wmi_ops wmi_tlv_ops = {
 	.gen_force_fw_hang = ath10k_wmi_tlv_op_gen_force_fw_hang,
 	/* .gen_mgmt_tx = not implemented; HTT is used */
 	.gen_mgmt_tx_send = ath10k_wmi_tlv_op_gen_mgmt_tx_send,
+	.cleanup_mgmt_tx_send = ath10k_wmi_tlv_op_cleanup_mgmt_tx_send,
 	.gen_dbglog_cfg = ath10k_wmi_tlv_op_gen_dbglog_cfg,
 	.gen_pktlog_enable = ath10k_wmi_tlv_op_gen_pktlog_enable,
 	.gen_pktlog_disable = ath10k_wmi_tlv_op_gen_pktlog_disable,
-- 
2.25.1

[PATCH AUTOSEL 4.19 068/106] ath10k: Remove msdu from idr when management pkt send fails

[Sasha Levin]

From: Rakesh Pillai <pillair@codeaurora.org>

[ Upstream commit c730c477176ad4af86d9aae4d360a7ad840b073a ]

Currently when the sending of any management pkt
via wmi command fails, the packet is being unmapped
freed in the error handling. But the idr entry added,
which is used to track these packet is not getting removed.

Hence, during unload, in wmi cleanup, all the entries
in IDR are removed and the corresponding buffer is
attempted to be freed. This can cause a situation where
one packet is attempted to be freed twice.

Fix this error by rmeoving the msdu from the idr
list when the sending of a management packet over
wmi fails.

Tested HW: WCN3990
Tested FW: WLAN.HL.3.1-01040-QCAHLSWMTPLZ-1

Fixes: 1807da49733e ("ath10k: wmi: add management tx by reference support over wmi")
Signed-off-by: Rakesh Pillai <pillair@codeaurora.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/1588667015-25490-1-git-send-email-pillair@codeaurora.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/wireless/ath/ath10k/mac.c     |  3 +++
 drivers/net/wireless/ath/ath10k/wmi-ops.h | 10 ++++++++++
 drivers/net/wireless/ath/ath10k/wmi-tlv.c | 15 +++++++++++++++
 3 files changed, 28 insertions(+)

diff --git a/drivers/net/wireless/ath/ath10k/mac.c b/drivers/net/wireless/ath/ath10k/mac.c
index a09d7a07e90a..81af403c19c2 100644
--- a/drivers/net/wireless/ath/ath10k/mac.c
+++ b/drivers/net/wireless/ath/ath10k/mac.c
@@ -3852,6 +3852,9 @@ void ath10k_mgmt_over_wmi_tx_work(struct work_struct *work)
 			if (ret) {
 				ath10k_warn(ar, "failed to transmit management frame by ref via WMI: %d\n",
 					    ret);
+				/* remove this msdu from idr tracking */
+				ath10k_wmi_cleanup_mgmt_tx_send(ar, skb);
+
 				dma_unmap_single(ar->dev, paddr, skb->len,
 						 DMA_TO_DEVICE);
 				ieee80211_free_txskb(ar->hw, skb);
diff --git a/drivers/net/wireless/ath/ath10k/wmi-ops.h b/drivers/net/wireless/ath/ath10k/wmi-ops.h
index 7fd63bbf8e24..b6cd33fa79f8 100644
--- a/drivers/net/wireless/ath/ath10k/wmi-ops.h
+++ b/drivers/net/wireless/ath/ath10k/wmi-ops.h
@@ -139,6 +139,7 @@ struct wmi_ops {
 	struct sk_buff *(*gen_mgmt_tx_send)(struct ath10k *ar,
 					    struct sk_buff *skb,
 					    dma_addr_t paddr);
+	int (*cleanup_mgmt_tx_send)(struct ath10k *ar, struct sk_buff *msdu);
 	struct sk_buff *(*gen_dbglog_cfg)(struct ath10k *ar, u64 module_enable,
 					  u32 log_level);
 	struct sk_buff *(*gen_pktlog_enable)(struct ath10k *ar, u32 filter);
@@ -431,6 +432,15 @@ ath10k_wmi_get_txbf_conf_scheme(struct ath10k *ar)
 	return ar->wmi.ops->get_txbf_conf_scheme(ar);
 }
 
+static inline int
+ath10k_wmi_cleanup_mgmt_tx_send(struct ath10k *ar, struct sk_buff *msdu)
+{
+	if (!ar->wmi.ops->cleanup_mgmt_tx_send)
+		return -EOPNOTSUPP;
+
+	return ar->wmi.ops->cleanup_mgmt_tx_send(ar, msdu);
+}
+
 static inline int
 ath10k_wmi_mgmt_tx_send(struct ath10k *ar, struct sk_buff *msdu,
 			dma_addr_t paddr)
diff --git a/drivers/net/wireless/ath/ath10k/wmi-tlv.c b/drivers/net/wireless/ath/ath10k/wmi-tlv.c
index 248decb494c2..7f435fa29f75 100644
--- a/drivers/net/wireless/ath/ath10k/wmi-tlv.c
+++ b/drivers/net/wireless/ath/ath10k/wmi-tlv.c
@@ -2638,6 +2638,18 @@ ath10k_wmi_tlv_op_gen_request_stats(struct ath10k *ar, u32 stats_mask)
 	return skb;
 }
 
+static int
+ath10k_wmi_tlv_op_cleanup_mgmt_tx_send(struct ath10k *ar,
+				       struct sk_buff *msdu)
+{
+	struct ath10k_skb_cb *cb = ATH10K_SKB_CB(msdu);
+	struct ath10k_wmi *wmi = &ar->wmi;
+
+	idr_remove(&wmi->mgmt_pending_tx, cb->msdu_id);
+
+	return 0;
+}
+
 static int
 ath10k_wmi_mgmt_tx_alloc_msdu_id(struct ath10k *ar, struct sk_buff *skb,
 				 dma_addr_t paddr)
@@ -2710,6 +2722,8 @@ ath10k_wmi_tlv_op_gen_mgmt_tx_send(struct ath10k *ar, struct sk_buff *msdu,
 	if (desc_id < 0)
 		goto err_free_skb;
 
+	cb->msdu_id = desc_id;
+
 	ptr = (void *)skb->data;
 	tlv = ptr;
 	tlv->tag = __cpu_to_le16(WMI_TLV_TAG_STRUCT_MGMT_TX_CMD);
@@ -3949,6 +3963,7 @@ static const struct wmi_ops wmi_tlv_ops = {
 	.gen_force_fw_hang = ath10k_wmi_tlv_op_gen_force_fw_hang,
 	/* .gen_mgmt_tx = not implemented; HTT is used */
 	.gen_mgmt_tx_send = ath10k_wmi_tlv_op_gen_mgmt_tx_send,
+	.cleanup_mgmt_tx_send = ath10k_wmi_tlv_op_cleanup_mgmt_tx_send,
 	.gen_dbglog_cfg = ath10k_wmi_tlv_op_gen_dbglog_cfg,
 	.gen_pktlog_enable = ath10k_wmi_tlv_op_gen_pktlog_enable,
 	.gen_pktlog_disable = ath10k_wmi_tlv_op_gen_pktlog_disable,
-- 
2.25.1


_______________________________________________
ath10k mailing list
ath10k@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/ath10k

[PATCH AUTOSEL 4.19 069/106] wcn36xx: Fix error handling path in 'wcn36xx_probe()'

[Sasha Levin]

From: Christophe JAILLET <christophe.jaillet@wanadoo.fr>

[ Upstream commit a86308fc534edeceaf64670c691e17485436a4f4 ]

In case of error, 'qcom_wcnss_open_channel()' must be undone by a call to
'rpmsg_destroy_ept()', as already done in the remove function.

Fixes: 5052de8deff5 ("soc: qcom: smd: Transition client drivers from smd to rpmsg")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20200507043619.200051-1-christophe.jaillet@wanadoo.fr
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/wireless/ath/wcn36xx/main.c | 6 ++++--
 1 file changed, 4 insertions(+), 2 deletions(-)

diff --git a/drivers/net/wireless/ath/wcn36xx/main.c b/drivers/net/wireless/ath/wcn36xx/main.c
index 79998a3ddb7a..ad051f34e65b 100644
--- a/drivers/net/wireless/ath/wcn36xx/main.c
+++ b/drivers/net/wireless/ath/wcn36xx/main.c
@@ -1341,7 +1341,7 @@ static int wcn36xx_probe(struct platform_device *pdev)
 	if (addr && ret != ETH_ALEN) {
 		wcn36xx_err("invalid local-mac-address\n");
 		ret = -EINVAL;
-		goto out_wq;
+		goto out_destroy_ept;
 	} else if (addr) {
 		wcn36xx_info("mac address: %pM\n", addr);
 		SET_IEEE80211_PERM_ADDR(wcn->hw, addr);
@@ -1349,7 +1349,7 @@ static int wcn36xx_probe(struct platform_device *pdev)
 
 	ret = wcn36xx_platform_get_resources(wcn, pdev);
 	if (ret)
-		goto out_wq;
+		goto out_destroy_ept;
 
 	wcn36xx_init_ieee80211(wcn);
 	ret = ieee80211_register_hw(wcn->hw);
@@ -1361,6 +1361,8 @@ static int wcn36xx_probe(struct platform_device *pdev)
 out_unmap:
 	iounmap(wcn->ccu_base);
 	iounmap(wcn->dxe_base);
+out_destroy_ept:
+	rpmsg_destroy_ept(wcn->smd_channel);
 out_wq:
 	ieee80211_free_hw(hw);
 out_err:
-- 
2.25.1

[PATCH AUTOSEL 4.19 070/106] net: qed*: Reduce RX and TX default ring count when running inside kdump kernel

[Sasha Levin]

From: Bhupesh Sharma <bhsharma@redhat.com>

[ Upstream commit 73e030977f7884dbe1be0018bab517e8d02760f8 ]

Normally kdump kernel(s) run under severe memory constraint with the
basic idea being to save the crashdump vmcore reliably when the primary
kernel panics/hangs.

Currently the qed* ethernet driver ends up consuming a lot of memory in
the kdump kernel, leading to kdump kernel panic when one tries to save
the vmcore via ssh/nfs (thus utilizing the services of the underlying
qed* network interfaces).

An example OOM message log seen in the kdump kernel can be seen here
[1], with crashkernel size reservation of 512M.

Using tools like memstrack (see [2]), we can track the modules taking up
the bulk of memory in the kdump kernel and organize the memory usage
output as per 'highest allocator first'. An example log for the OOM case
indicates that the qed* modules end up allocating approximately 216M
memory, which is a large part of the total crashkernel size:

 dracut-pre-pivot[676]: ======== Report format module_summary: ========
 dracut-pre-pivot[676]: Module qed using 149.6MB (2394 pages), peak allocation 149.6MB (2394 pages)
 dracut-pre-pivot[676]: Module qede using 65.3MB (1045 pages), peak allocation 65.3MB (1045 pages)

This patch reduces the default RX and TX ring count from 1024 to 64
when running inside kdump kernel, which leads to a significant memory
saving.

An example log with the patch applied shows the reduced memory
allocation in the kdump kernel:
 dracut-pre-pivot[674]: ======== Report format module_summary: ========
 dracut-pre-pivot[674]: Module qed using 141.8MB (2268 pages), peak allocation 141.8MB (2268 pages)
 <..snip..>
[dracut-pre-pivot[674]: Module qede using 4.8MB (76 pages), peak allocation 4.9MB (78 pages)

Tested crashdump vmcore save via ssh/nfs protocol using underlying qed*
network interface after applying this patch.

[1] OOM log:
------------

 kworker/0:6: page allocation failure: order:6,
 mode:0x60c0c0(GFP_KERNEL|__GFP_COMP|__GFP_ZERO), nodemask=(null)
 kworker/0:6 cpuset=/ mems_allowed=0
 CPU: 0 PID: 145 Comm: kworker/0:6 Not tainted 4.18.0-109.el8.aarch64 #1
 Hardware name: To be filled by O.E.M. Saber/Saber, BIOS 0ACKL025
 01/18/2019
 Workqueue: events work_for_cpu_fn
 Call trace:
  dump_backtrace+0x0/0x188
  show_stack+0x24/0x30
  dump_stack+0x90/0xb4
  warn_alloc+0xf4/0x178
  __alloc_pages_nodemask+0xcac/0xd58
  alloc_pages_current+0x8c/0xf8
  kmalloc_order_trace+0x38/0x108
  qed_iov_alloc+0x40/0x248 [qed]
  qed_resc_alloc+0x224/0x518 [qed]
  qed_slowpath_start+0x254/0x928 [qed]
   __qede_probe+0xf8/0x5e0 [qede]
  qede_probe+0x68/0xd8 [qede]
  local_pci_probe+0x44/0xa8
  work_for_cpu_fn+0x20/0x30
  process_one_work+0x1ac/0x3e8
  worker_thread+0x44/0x448
  kthread+0x130/0x138
  ret_from_fork+0x10/0x18
  Cannot start slowpath
  qede: probe of 0000:05:00.1 failed with error -12

[2]. Memstrack tool: https://github.com/ryncsn/memstrack

Cc: kexec@lists.infradead.org
Cc: linux-kernel@vger.kernel.org
Cc: Ariel Elior <aelior@marvell.com>
Cc: GR-everest-linux-l2@marvell.com
Cc: Manish Chopra <manishc@marvell.com>
Cc: David S. Miller <davem@davemloft.net>
Signed-off-by: Bhupesh Sharma <bhsharma@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/qlogic/qede/qede.h      |  2 ++
 drivers/net/ethernet/qlogic/qede/qede_main.c | 11 +++++++++--
 2 files changed, 11 insertions(+), 2 deletions(-)

diff --git a/drivers/net/ethernet/qlogic/qede/qede.h b/drivers/net/ethernet/qlogic/qede/qede.h
index dc3be8a4acf4..2bdc410d1144 100644
--- a/drivers/net/ethernet/qlogic/qede/qede.h
+++ b/drivers/net/ethernet/qlogic/qede/qede.h
@@ -550,12 +550,14 @@ int qede_add_tc_flower_fltr(struct qede_dev *edev, __be16 proto,
 #define RX_RING_SIZE		((u16)BIT(RX_RING_SIZE_POW))
 #define NUM_RX_BDS_MAX		(RX_RING_SIZE - 1)
 #define NUM_RX_BDS_MIN		128
+#define NUM_RX_BDS_KDUMP_MIN	63
 #define NUM_RX_BDS_DEF		((u16)BIT(10) - 1)
 
 #define TX_RING_SIZE_POW	13
 #define TX_RING_SIZE		((u16)BIT(TX_RING_SIZE_POW))
 #define NUM_TX_BDS_MAX		(TX_RING_SIZE - 1)
 #define NUM_TX_BDS_MIN		128
+#define NUM_TX_BDS_KDUMP_MIN	63
 #define NUM_TX_BDS_DEF		NUM_TX_BDS_MAX
 
 #define QEDE_MIN_PKT_LEN		64
diff --git a/drivers/net/ethernet/qlogic/qede/qede_main.c b/drivers/net/ethernet/qlogic/qede/qede_main.c
index 0d8e39ffbcd1..1aabb2e7a38b 100644
--- a/drivers/net/ethernet/qlogic/qede/qede_main.c
+++ b/drivers/net/ethernet/qlogic/qede/qede_main.c
@@ -29,6 +29,7 @@
  * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
  * SOFTWARE.
  */
+#include <linux/crash_dump.h>
 #include <linux/module.h>
 #include <linux/pci.h>
 #include <linux/version.h>
@@ -730,8 +731,14 @@ static struct qede_dev *qede_alloc_etherdev(struct qed_dev *cdev,
 	edev->dp_module = dp_module;
 	edev->dp_level = dp_level;
 	edev->ops = qed_ops;
-	edev->q_num_rx_buffers = NUM_RX_BDS_DEF;
-	edev->q_num_tx_buffers = NUM_TX_BDS_DEF;
+
+	if (is_kdump_kernel()) {
+		edev->q_num_rx_buffers = NUM_RX_BDS_KDUMP_MIN;
+		edev->q_num_tx_buffers = NUM_TX_BDS_KDUMP_MIN;
+	} else {
+		edev->q_num_rx_buffers = NUM_RX_BDS_DEF;
+		edev->q_num_tx_buffers = NUM_TX_BDS_DEF;
+	}
 
 	DP_INFO(edev, "Allocated netdev with %d tx queues and %d rx queues\n",
 		info->num_queues, info->num_queues);
-- 
2.25.1

[PATCH AUTOSEL 4.19 070/106] net: qed*: Reduce RX and TX default ring count when running inside kdump kernel

[Sasha Levin]

From: Bhupesh Sharma <bhsharma@redhat.com>

[ Upstream commit 73e030977f7884dbe1be0018bab517e8d02760f8 ]

Normally kdump kernel(s) run under severe memory constraint with the
basic idea being to save the crashdump vmcore reliably when the primary
kernel panics/hangs.

Currently the qed* ethernet driver ends up consuming a lot of memory in
the kdump kernel, leading to kdump kernel panic when one tries to save
the vmcore via ssh/nfs (thus utilizing the services of the underlying
qed* network interfaces).

An example OOM message log seen in the kdump kernel can be seen here
[1], with crashkernel size reservation of 512M.

Using tools like memstrack (see [2]), we can track the modules taking up
the bulk of memory in the kdump kernel and organize the memory usage
output as per 'highest allocator first'. An example log for the OOM case
indicates that the qed* modules end up allocating approximately 216M
memory, which is a large part of the total crashkernel size:

 dracut-pre-pivot[676]: ======== Report format module_summary: ========
 dracut-pre-pivot[676]: Module qed using 149.6MB (2394 pages), peak allocation 149.6MB (2394 pages)
 dracut-pre-pivot[676]: Module qede using 65.3MB (1045 pages), peak allocation 65.3MB (1045 pages)

This patch reduces the default RX and TX ring count from 1024 to 64
when running inside kdump kernel, which leads to a significant memory
saving.

An example log with the patch applied shows the reduced memory
allocation in the kdump kernel:
 dracut-pre-pivot[674]: ======== Report format module_summary: ========
 dracut-pre-pivot[674]: Module qed using 141.8MB (2268 pages), peak allocation 141.8MB (2268 pages)
 <..snip..>
[dracut-pre-pivot[674]: Module qede using 4.8MB (76 pages), peak allocation 4.9MB (78 pages)

Tested crashdump vmcore save via ssh/nfs protocol using underlying qed*
network interface after applying this patch.

[1] OOM log:
------------

 kworker/0:6: page allocation failure: order:6,
 mode:0x60c0c0(GFP_KERNEL|__GFP_COMP|__GFP_ZERO), nodemask=(null)
 kworker/0:6 cpuset=/ mems_allowed=0
 CPU: 0 PID: 145 Comm: kworker/0:6 Not tainted 4.18.0-109.el8.aarch64 #1
 Hardware name: To be filled by O.E.M. Saber/Saber, BIOS 0ACKL025
 01/18/2019
 Workqueue: events work_for_cpu_fn
 Call trace:
  dump_backtrace+0x0/0x188
  show_stack+0x24/0x30
  dump_stack+0x90/0xb4
  warn_alloc+0xf4/0x178
  __alloc_pages_nodemask+0xcac/0xd58
  alloc_pages_current+0x8c/0xf8
  kmalloc_order_trace+0x38/0x108
  qed_iov_alloc+0x40/0x248 [qed]
  qed_resc_alloc+0x224/0x518 [qed]
  qed_slowpath_start+0x254/0x928 [qed]
   __qede_probe+0xf8/0x5e0 [qede]
  qede_probe+0x68/0xd8 [qede]
  local_pci_probe+0x44/0xa8
  work_for_cpu_fn+0x20/0x30
  process_one_work+0x1ac/0x3e8
  worker_thread+0x44/0x448
  kthread+0x130/0x138
  ret_from_fork+0x10/0x18
  Cannot start slowpath
  qede: probe of 0000:05:00.1 failed with error -12

[2]. Memstrack tool: https://github.com/ryncsn/memstrack

Cc: kexec@lists.infradead.org
Cc: linux-kernel@vger.kernel.org
Cc: Ariel Elior <aelior@marvell.com>
Cc: GR-everest-linux-l2@marvell.com
Cc: Manish Chopra <manishc@marvell.com>
Cc: David S. Miller <davem@davemloft.net>
Signed-off-by: Bhupesh Sharma <bhsharma@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/qlogic/qede/qede.h      |  2 ++
 drivers/net/ethernet/qlogic/qede/qede_main.c | 11 +++++++++--
 2 files changed, 11 insertions(+), 2 deletions(-)

diff --git a/drivers/net/ethernet/qlogic/qede/qede.h b/drivers/net/ethernet/qlogic/qede/qede.h
index dc3be8a4acf4..2bdc410d1144 100644
--- a/drivers/net/ethernet/qlogic/qede/qede.h
+++ b/drivers/net/ethernet/qlogic/qede/qede.h
@@ -550,12 +550,14 @@ int qede_add_tc_flower_fltr(struct qede_dev *edev, __be16 proto,
 #define RX_RING_SIZE		((u16)BIT(RX_RING_SIZE_POW))
 #define NUM_RX_BDS_MAX		(RX_RING_SIZE - 1)
 #define NUM_RX_BDS_MIN		128
+#define NUM_RX_BDS_KDUMP_MIN	63
 #define NUM_RX_BDS_DEF		((u16)BIT(10) - 1)
 
 #define TX_RING_SIZE_POW	13
 #define TX_RING_SIZE		((u16)BIT(TX_RING_SIZE_POW))
 #define NUM_TX_BDS_MAX		(TX_RING_SIZE - 1)
 #define NUM_TX_BDS_MIN		128
+#define NUM_TX_BDS_KDUMP_MIN	63
 #define NUM_TX_BDS_DEF		NUM_TX_BDS_MAX
 
 #define QEDE_MIN_PKT_LEN		64
diff --git a/drivers/net/ethernet/qlogic/qede/qede_main.c b/drivers/net/ethernet/qlogic/qede/qede_main.c
index 0d8e39ffbcd1..1aabb2e7a38b 100644
--- a/drivers/net/ethernet/qlogic/qede/qede_main.c
+++ b/drivers/net/ethernet/qlogic/qede/qede_main.c
@@ -29,6 +29,7 @@
  * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
  * SOFTWARE.
  */
+#include <linux/crash_dump.h>
 #include <linux/module.h>
 #include <linux/pci.h>
 #include <linux/version.h>
@@ -730,8 +731,14 @@ static struct qede_dev *qede_alloc_etherdev(struct qed_dev *cdev,
 	edev->dp_module = dp_module;
 	edev->dp_level = dp_level;
 	edev->ops = qed_ops;
-	edev->q_num_rx_buffers = NUM_RX_BDS_DEF;
-	edev->q_num_tx_buffers = NUM_TX_BDS_DEF;
+
+	if (is_kdump_kernel()) {
+		edev->q_num_rx_buffers = NUM_RX_BDS_KDUMP_MIN;
+		edev->q_num_tx_buffers = NUM_TX_BDS_KDUMP_MIN;
+	} else {
+		edev->q_num_rx_buffers = NUM_RX_BDS_DEF;
+		edev->q_num_tx_buffers = NUM_TX_BDS_DEF;
+	}
 
 	DP_INFO(edev, "Allocated netdev with %d tx queues and %d rx queues\n",
 		info->num_queues, info->num_queues);
-- 
2.25.1


_______________________________________________
kexec mailing list
kexec@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/kexec

[PATCH AUTOSEL 4.19 071/106] mt76: avoid rx reorder buffer overflow

[Sasha Levin]

From: Ryder Lee <ryder.lee@mediatek.com>

[ Upstream commit 7c4f744d6703757be959f521a7a441bf34745d99 ]

Enlarge slot to support 11ax 256 BA (256 MPDUs in an AMPDU)

Signed-off-by: Chih-Min Chen <chih-min.chen@mediatek.com>
Signed-off-by: Ryder Lee <ryder.lee@mediatek.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/wireless/mediatek/mt76/agg-rx.c | 8 ++++----
 drivers/net/wireless/mediatek/mt76/mt76.h   | 6 +++---
 2 files changed, 7 insertions(+), 7 deletions(-)

diff --git a/drivers/net/wireless/mediatek/mt76/agg-rx.c b/drivers/net/wireless/mediatek/mt76/agg-rx.c
index 73c8b2805c97..d44d57e6eb27 100644
--- a/drivers/net/wireless/mediatek/mt76/agg-rx.c
+++ b/drivers/net/wireless/mediatek/mt76/agg-rx.c
@@ -154,8 +154,8 @@ void mt76_rx_aggr_reorder(struct sk_buff *skb, struct sk_buff_head *frames)
 	struct ieee80211_sta *sta;
 	struct mt76_rx_tid *tid;
 	bool sn_less;
-	u16 seqno, head, size;
-	u8 ackp, idx;
+	u16 seqno, head, size, idx;
+	u8 ackp;
 
 	__skb_queue_tail(frames, skb);
 
@@ -240,7 +240,7 @@ void mt76_rx_aggr_reorder(struct sk_buff *skb, struct sk_buff_head *frames)
 }
 
 int mt76_rx_aggr_start(struct mt76_dev *dev, struct mt76_wcid *wcid, u8 tidno,
-		       u16 ssn, u8 size)
+		       u16 ssn, u16 size)
 {
 	struct mt76_rx_tid *tid;
 
@@ -264,7 +264,7 @@ EXPORT_SYMBOL_GPL(mt76_rx_aggr_start);
 
 static void mt76_rx_aggr_shutdown(struct mt76_dev *dev, struct mt76_rx_tid *tid)
 {
-	u8 size = tid->size;
+	u16 size = tid->size;
 	int i;
 
 	cancel_delayed_work(&tid->reorder_work);
diff --git a/drivers/net/wireless/mediatek/mt76/mt76.h b/drivers/net/wireless/mediatek/mt76/mt76.h
index 2eab35879163..7b1667ec619e 100644
--- a/drivers/net/wireless/mediatek/mt76/mt76.h
+++ b/drivers/net/wireless/mediatek/mt76/mt76.h
@@ -193,8 +193,8 @@ struct mt76_rx_tid {
 	struct delayed_work reorder_work;
 
 	u16 head;
-	u8 size;
-	u8 nframes;
+	u16 size;
+	u16 nframes;
 
 	u8 started:1, stopped:1, timer_pending:1;
 
@@ -537,7 +537,7 @@ int mt76_get_survey(struct ieee80211_hw *hw, int idx,
 void mt76_set_stream_caps(struct mt76_dev *dev, bool vht);
 
 int mt76_rx_aggr_start(struct mt76_dev *dev, struct mt76_wcid *wcid, u8 tid,
-		       u16 ssn, u8 size);
+		       u16 ssn, u16 size);
 void mt76_rx_aggr_stop(struct mt76_dev *dev, struct mt76_wcid *wcid, u8 tid);
 
 void mt76_wcid_key_setup(struct mt76_dev *dev, struct mt76_wcid *wcid,
-- 
2.25.1

[PATCH AUTOSEL 4.19 071/106] mt76: avoid rx reorder buffer overflow

[Sasha Levin]

From: Ryder Lee <ryder.lee@mediatek.com>

[ Upstream commit 7c4f744d6703757be959f521a7a441bf34745d99 ]

Enlarge slot to support 11ax 256 BA (256 MPDUs in an AMPDU)

Signed-off-by: Chih-Min Chen <chih-min.chen@mediatek.com>
Signed-off-by: Ryder Lee <ryder.lee@mediatek.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/wireless/mediatek/mt76/agg-rx.c | 8 ++++----
 drivers/net/wireless/mediatek/mt76/mt76.h   | 6 +++---
 2 files changed, 7 insertions(+), 7 deletions(-)

diff --git a/drivers/net/wireless/mediatek/mt76/agg-rx.c b/drivers/net/wireless/mediatek/mt76/agg-rx.c
index 73c8b2805c97..d44d57e6eb27 100644
--- a/drivers/net/wireless/mediatek/mt76/agg-rx.c
+++ b/drivers/net/wireless/mediatek/mt76/agg-rx.c
@@ -154,8 +154,8 @@ void mt76_rx_aggr_reorder(struct sk_buff *skb, struct sk_buff_head *frames)
 	struct ieee80211_sta *sta;
 	struct mt76_rx_tid *tid;
 	bool sn_less;
-	u16 seqno, head, size;
-	u8 ackp, idx;
+	u16 seqno, head, size, idx;
+	u8 ackp;
 
 	__skb_queue_tail(frames, skb);
 
@@ -240,7 +240,7 @@ void mt76_rx_aggr_reorder(struct sk_buff *skb, struct sk_buff_head *frames)
 }
 
 int mt76_rx_aggr_start(struct mt76_dev *dev, struct mt76_wcid *wcid, u8 tidno,
-		       u16 ssn, u8 size)
+		       u16 ssn, u16 size)
 {
 	struct mt76_rx_tid *tid;
 
@@ -264,7 +264,7 @@ EXPORT_SYMBOL_GPL(mt76_rx_aggr_start);
 
 static void mt76_rx_aggr_shutdown(struct mt76_dev *dev, struct mt76_rx_tid *tid)
 {
-	u8 size = tid->size;
+	u16 size = tid->size;
 	int i;
 
 	cancel_delayed_work(&tid->reorder_work);
diff --git a/drivers/net/wireless/mediatek/mt76/mt76.h b/drivers/net/wireless/mediatek/mt76/mt76.h
index 2eab35879163..7b1667ec619e 100644
--- a/drivers/net/wireless/mediatek/mt76/mt76.h
+++ b/drivers/net/wireless/mediatek/mt76/mt76.h
@@ -193,8 +193,8 @@ struct mt76_rx_tid {
 	struct delayed_work reorder_work;
 
 	u16 head;
-	u8 size;
-	u8 nframes;
+	u16 size;
+	u16 nframes;
 
 	u8 started:1, stopped:1, timer_pending:1;
 
@@ -537,7 +537,7 @@ int mt76_get_survey(struct ieee80211_hw *hw, int idx,
 void mt76_set_stream_caps(struct mt76_dev *dev, bool vht);
 
 int mt76_rx_aggr_start(struct mt76_dev *dev, struct mt76_wcid *wcid, u8 tid,
-		       u16 ssn, u8 size);
+		       u16 ssn, u16 size);
 void mt76_rx_aggr_stop(struct mt76_dev *dev, struct mt76_wcid *wcid, u8 tid);
 
 void mt76_wcid_key_setup(struct mt76_dev *dev, struct mt76_wcid *wcid,
-- 
2.25.1


_______________________________________________
Linux-mediatek mailing list
Linux-mediatek@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-mediatek

[PATCH AUTOSEL 4.19 071/106] mt76: avoid rx reorder buffer overflow

[Sasha Levin]

From: Ryder Lee <ryder.lee@mediatek.com>

[ Upstream commit 7c4f744d6703757be959f521a7a441bf34745d99 ]

Enlarge slot to support 11ax 256 BA (256 MPDUs in an AMPDU)

Signed-off-by: Chih-Min Chen <chih-min.chen@mediatek.com>
Signed-off-by: Ryder Lee <ryder.lee@mediatek.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/wireless/mediatek/mt76/agg-rx.c | 8 ++++----
 drivers/net/wireless/mediatek/mt76/mt76.h   | 6 +++---
 2 files changed, 7 insertions(+), 7 deletions(-)

diff --git a/drivers/net/wireless/mediatek/mt76/agg-rx.c b/drivers/net/wireless/mediatek/mt76/agg-rx.c
index 73c8b2805c97..d44d57e6eb27 100644
--- a/drivers/net/wireless/mediatek/mt76/agg-rx.c
+++ b/drivers/net/wireless/mediatek/mt76/agg-rx.c
@@ -154,8 +154,8 @@ void mt76_rx_aggr_reorder(struct sk_buff *skb, struct sk_buff_head *frames)
 	struct ieee80211_sta *sta;
 	struct mt76_rx_tid *tid;
 	bool sn_less;
-	u16 seqno, head, size;
-	u8 ackp, idx;
+	u16 seqno, head, size, idx;
+	u8 ackp;
 
 	__skb_queue_tail(frames, skb);
 
@@ -240,7 +240,7 @@ void mt76_rx_aggr_reorder(struct sk_buff *skb, struct sk_buff_head *frames)
 }
 
 int mt76_rx_aggr_start(struct mt76_dev *dev, struct mt76_wcid *wcid, u8 tidno,
-		       u16 ssn, u8 size)
+		       u16 ssn, u16 size)
 {
 	struct mt76_rx_tid *tid;
 
@@ -264,7 +264,7 @@ EXPORT_SYMBOL_GPL(mt76_rx_aggr_start);
 
 static void mt76_rx_aggr_shutdown(struct mt76_dev *dev, struct mt76_rx_tid *tid)
 {
-	u8 size = tid->size;
+	u16 size = tid->size;
 	int i;
 
 	cancel_delayed_work(&tid->reorder_work);
diff --git a/drivers/net/wireless/mediatek/mt76/mt76.h b/drivers/net/wireless/mediatek/mt76/mt76.h
index 2eab35879163..7b1667ec619e 100644
--- a/drivers/net/wireless/mediatek/mt76/mt76.h
+++ b/drivers/net/wireless/mediatek/mt76/mt76.h
@@ -193,8 +193,8 @@ struct mt76_rx_tid {
 	struct delayed_work reorder_work;
 
 	u16 head;
-	u8 size;
-	u8 nframes;
+	u16 size;
+	u16 nframes;
 
 	u8 started:1, stopped:1, timer_pending:1;
 
@@ -537,7 +537,7 @@ int mt76_get_survey(struct ieee80211_hw *hw, int idx,
 void mt76_set_stream_caps(struct mt76_dev *dev, bool vht);
 
 int mt76_rx_aggr_start(struct mt76_dev *dev, struct mt76_wcid *wcid, u8 tid,
-		       u16 ssn, u8 size);
+		       u16 ssn, u16 size);
 void mt76_rx_aggr_stop(struct mt76_dev *dev, struct mt76_wcid *wcid, u8 tid);
 
 void mt76_wcid_key_setup(struct mt76_dev *dev, struct mt76_wcid *wcid,
-- 
2.25.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH AUTOSEL 4.19 072/106] md: don't flush workqueue unconditionally in md_open

[Sasha Levin]

From: Guoqing Jiang <guoqing.jiang@cloud.ionos.com>

[ Upstream commit f6766ff6afff70e2aaf39e1511e16d471de7c3ae ]

We need to check mddev->del_work before flush workqueu since the purpose
of flush is to ensure the previous md is disappeared. Otherwise the similar
deadlock appeared if LOCKDEP is enabled, it is due to md_open holds the
bdev->bd_mutex before flush workqueue.

kernel: [  154.522645] ======================================================
kernel: [  154.522647] WARNING: possible circular locking dependency detected
kernel: [  154.522650] 5.6.0-rc7-lp151.27-default #25 Tainted: G           O
kernel: [  154.522651] ------------------------------------------------------
kernel: [  154.522653] mdadm/2482 is trying to acquire lock:
kernel: [  154.522655] ffff888078529128 ((wq_completion)md_misc){+.+.}, at: flush_workqueue+0x84/0x4b0
kernel: [  154.522673]
kernel: [  154.522673] but task is already holding lock:
kernel: [  154.522675] ffff88804efa9338 (&bdev->bd_mutex){+.+.}, at: __blkdev_get+0x79/0x590
kernel: [  154.522691]
kernel: [  154.522691] which lock already depends on the new lock.
kernel: [  154.522691]
kernel: [  154.522694]
kernel: [  154.522694] the existing dependency chain (in reverse order) is:
kernel: [  154.522696]
kernel: [  154.522696] -> #4 (&bdev->bd_mutex){+.+.}:
kernel: [  154.522704]        __mutex_lock+0x87/0x950
kernel: [  154.522706]        __blkdev_get+0x79/0x590
kernel: [  154.522708]        blkdev_get+0x65/0x140
kernel: [  154.522709]        blkdev_get_by_dev+0x2f/0x40
kernel: [  154.522716]        lock_rdev+0x3d/0x90 [md_mod]
kernel: [  154.522719]        md_import_device+0xd6/0x1b0 [md_mod]
kernel: [  154.522723]        new_dev_store+0x15e/0x210 [md_mod]
kernel: [  154.522728]        md_attr_store+0x7a/0xc0 [md_mod]
kernel: [  154.522732]        kernfs_fop_write+0x117/0x1b0
kernel: [  154.522735]        vfs_write+0xad/0x1a0
kernel: [  154.522737]        ksys_write+0xa4/0xe0
kernel: [  154.522745]        do_syscall_64+0x64/0x2b0
kernel: [  154.522748]        entry_SYSCALL_64_after_hwframe+0x49/0xbe
kernel: [  154.522749]
kernel: [  154.522749] -> #3 (&mddev->reconfig_mutex){+.+.}:
kernel: [  154.522752]        __mutex_lock+0x87/0x950
kernel: [  154.522756]        new_dev_store+0xc9/0x210 [md_mod]
kernel: [  154.522759]        md_attr_store+0x7a/0xc0 [md_mod]
kernel: [  154.522761]        kernfs_fop_write+0x117/0x1b0
kernel: [  154.522763]        vfs_write+0xad/0x1a0
kernel: [  154.522765]        ksys_write+0xa4/0xe0
kernel: [  154.522767]        do_syscall_64+0x64/0x2b0
kernel: [  154.522769]        entry_SYSCALL_64_after_hwframe+0x49/0xbe
kernel: [  154.522770]
kernel: [  154.522770] -> #2 (kn->count#253){++++}:
kernel: [  154.522775]        __kernfs_remove+0x253/0x2c0
kernel: [  154.522778]        kernfs_remove+0x1f/0x30
kernel: [  154.522780]        kobject_del+0x28/0x60
kernel: [  154.522783]        mddev_delayed_delete+0x24/0x30 [md_mod]
kernel: [  154.522786]        process_one_work+0x2a7/0x5f0
kernel: [  154.522788]        worker_thread+0x2d/0x3d0
kernel: [  154.522793]        kthread+0x117/0x130
kernel: [  154.522795]        ret_from_fork+0x3a/0x50
kernel: [  154.522796]
kernel: [  154.522796] -> #1 ((work_completion)(&mddev->del_work)){+.+.}:
kernel: [  154.522800]        process_one_work+0x27e/0x5f0
kernel: [  154.522802]        worker_thread+0x2d/0x3d0
kernel: [  154.522804]        kthread+0x117/0x130
kernel: [  154.522806]        ret_from_fork+0x3a/0x50
kernel: [  154.522807]
kernel: [  154.522807] -> #0 ((wq_completion)md_misc){+.+.}:
kernel: [  154.522813]        __lock_acquire+0x1392/0x1690
kernel: [  154.522816]        lock_acquire+0xb4/0x1a0
kernel: [  154.522818]        flush_workqueue+0xab/0x4b0
kernel: [  154.522821]        md_open+0xb6/0xc0 [md_mod]
kernel: [  154.522823]        __blkdev_get+0xea/0x590
kernel: [  154.522825]        blkdev_get+0x65/0x140
kernel: [  154.522828]        do_dentry_open+0x1d1/0x380
kernel: [  154.522831]        path_openat+0x567/0xcc0
kernel: [  154.522834]        do_filp_open+0x9b/0x110
kernel: [  154.522836]        do_sys_openat2+0x201/0x2a0
kernel: [  154.522838]        do_sys_open+0x57/0x80
kernel: [  154.522840]        do_syscall_64+0x64/0x2b0
kernel: [  154.522842]        entry_SYSCALL_64_after_hwframe+0x49/0xbe
kernel: [  154.522844]
kernel: [  154.522844] other info that might help us debug this:
kernel: [  154.522844]
kernel: [  154.522846] Chain exists of:
kernel: [  154.522846]   (wq_completion)md_misc --> &mddev->reconfig_mutex --> &bdev->bd_mutex
kernel: [  154.522846]
kernel: [  154.522850]  Possible unsafe locking scenario:
kernel: [  154.522850]
kernel: [  154.522852]        CPU0                    CPU1
kernel: [  154.522853]        ----                    ----
kernel: [  154.522854]   lock(&bdev->bd_mutex);
kernel: [  154.522856]                                lock(&mddev->reconfig_mutex);
kernel: [  154.522858]                                lock(&bdev->bd_mutex);
kernel: [  154.522860]   lock((wq_completion)md_misc);
kernel: [  154.522861]
kernel: [  154.522861]  *** DEADLOCK ***
kernel: [  154.522861]
kernel: [  154.522864] 1 lock held by mdadm/2482:
kernel: [  154.522865]  #0: ffff88804efa9338 (&bdev->bd_mutex){+.+.}, at: __blkdev_get+0x79/0x590
kernel: [  154.522868]
kernel: [  154.522868] stack backtrace:
kernel: [  154.522873] CPU: 1 PID: 2482 Comm: mdadm Tainted: G           O      5.6.0-rc7-lp151.27-default #25
kernel: [  154.522875] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.10.2-1ubuntu1 04/01/2014
kernel: [  154.522878] Call Trace:
kernel: [  154.522881]  dump_stack+0x8f/0xcb
kernel: [  154.522884]  check_noncircular+0x194/0x1b0
kernel: [  154.522888]  ? __lock_acquire+0x1392/0x1690
kernel: [  154.522890]  __lock_acquire+0x1392/0x1690
kernel: [  154.522893]  lock_acquire+0xb4/0x1a0
kernel: [  154.522895]  ? flush_workqueue+0x84/0x4b0
kernel: [  154.522898]  flush_workqueue+0xab/0x4b0
kernel: [  154.522900]  ? flush_workqueue+0x84/0x4b0
kernel: [  154.522905]  ? md_open+0xb6/0xc0 [md_mod]
kernel: [  154.522908]  md_open+0xb6/0xc0 [md_mod]
kernel: [  154.522910]  __blkdev_get+0xea/0x590
kernel: [  154.522912]  ? bd_acquire+0xc0/0xc0
kernel: [  154.522914]  blkdev_get+0x65/0x140
kernel: [  154.522916]  ? bd_acquire+0xc0/0xc0
kernel: [  154.522918]  do_dentry_open+0x1d1/0x380
kernel: [  154.522921]  path_openat+0x567/0xcc0
kernel: [  154.522923]  ? __lock_acquire+0x380/0x1690
kernel: [  154.522926]  do_filp_open+0x9b/0x110
kernel: [  154.522929]  ? __alloc_fd+0xe5/0x1f0
kernel: [  154.522935]  ? kmem_cache_alloc+0x28c/0x630
kernel: [  154.522939]  ? do_sys_openat2+0x201/0x2a0
kernel: [  154.522941]  do_sys_openat2+0x201/0x2a0
kernel: [  154.522944]  do_sys_open+0x57/0x80
kernel: [  154.522946]  do_syscall_64+0x64/0x2b0
kernel: [  154.522948]  entry_SYSCALL_64_after_hwframe+0x49/0xbe
kernel: [  154.522951] RIP: 0033:0x7f98d279d9ae

And md_alloc also flushed the same workqueue, but the thing is different
here. Because all the paths call md_alloc don't hold bdev->bd_mutex, and
the flush is necessary to avoid race condition, so leave it as it is.

Signed-off-by: Guoqing Jiang <guoqing.jiang@cloud.ionos.com>
Signed-off-by: Song Liu <songliubraving@fb.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/md/md.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/drivers/md/md.c b/drivers/md/md.c
index 9426976e0860..a6db4fd267aa 100644
--- a/drivers/md/md.c
+++ b/drivers/md/md.c
@@ -7438,7 +7438,8 @@ static int md_open(struct block_device *bdev, fmode_t mode)
 		 */
 		mddev_put(mddev);
 		/* Wait until bdev->bd_disk is definitely gone */
-		flush_workqueue(md_misc_wq);
+		if (work_pending(&mddev->del_work))
+			flush_workqueue(md_misc_wq);
 		/* Then retry the open from the top */
 		return -ERESTARTSYS;
 	}
-- 
2.25.1

[PATCH AUTOSEL 4.19 073/106] net: dsa: mt7530: set CPU port to fallback mode

[Sasha Levin]

From: DENG Qingfang <dqfext@gmail.com>

[ Upstream commit 38152ea37d8bdaffa22603e0a5b5b86cfa8714c9 ]

Currently, setting a bridge's self PVID to other value and deleting
the default VID 1 renders untagged ports of that VLAN unable to talk to
the CPU port:

	bridge vlan add dev br0 vid 2 pvid untagged self
	bridge vlan del dev br0 vid 1 self
	bridge vlan add dev sw0p0 vid 2 pvid untagged
	bridge vlan del dev sw0p0 vid 1
	# br0 cannot send untagged frames out of sw0p0 anymore

That is because the CPU port is set to security mode and its PVID is
still 1, and untagged frames are dropped due to VLAN member violation.

Set the CPU port to fallback mode so untagged frames can pass through.

Fixes: 83163f7dca56 ("net: dsa: mediatek: add VLAN support for MT7530")
Signed-off-by: DENG Qingfang <dqfext@gmail.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/dsa/mt7530.c | 11 ++++++++---
 drivers/net/dsa/mt7530.h |  6 ++++++
 2 files changed, 14 insertions(+), 3 deletions(-)

diff --git a/drivers/net/dsa/mt7530.c b/drivers/net/dsa/mt7530.c
index 8b39a211ecb6..616afd81536a 100644
--- a/drivers/net/dsa/mt7530.c
+++ b/drivers/net/dsa/mt7530.c
@@ -860,10 +860,15 @@ mt7530_port_set_vlan_aware(struct dsa_switch *ds, int port)
 		   PCR_MATRIX_MASK, PCR_MATRIX(MT7530_ALL_MEMBERS));
 
 	/* Trapped into security mode allows packet forwarding through VLAN
-	 * table lookup.
+	 * table lookup. CPU port is set to fallback mode to let untagged
+	 * frames pass through.
 	 */
-	mt7530_rmw(priv, MT7530_PCR_P(port), PCR_PORT_VLAN_MASK,
-		   MT7530_PORT_SECURITY_MODE);
+	if (dsa_is_cpu_port(ds, port))
+		mt7530_rmw(priv, MT7530_PCR_P(port), PCR_PORT_VLAN_MASK,
+			   MT7530_PORT_FALLBACK_MODE);
+	else
+		mt7530_rmw(priv, MT7530_PCR_P(port), PCR_PORT_VLAN_MASK,
+			   MT7530_PORT_SECURITY_MODE);
 
 	/* Set the port as a user port which is to be able to recognize VID
 	 * from incoming packets before fetching entry within the VLAN table.
diff --git a/drivers/net/dsa/mt7530.h b/drivers/net/dsa/mt7530.h
index 403adbe5a4b4..101d309ee445 100644
--- a/drivers/net/dsa/mt7530.h
+++ b/drivers/net/dsa/mt7530.h
@@ -148,6 +148,12 @@ enum mt7530_port_mode {
 	/* Port Matrix Mode: Frames are forwarded by the PCR_MATRIX members. */
 	MT7530_PORT_MATRIX_MODE = PORT_VLAN(0),
 
+	/* Fallback Mode: Forward received frames with ingress ports that do
+	 * not belong to the VLAN member. Frames whose VID is not listed on
+	 * the VLAN table are forwarded by the PCR_MATRIX members.
+	 */
+	MT7530_PORT_FALLBACK_MODE = PORT_VLAN(1),
+
 	/* Security Mode: Discard any frame due to ingress membership
 	 * violation or VID missed on the VLAN table.
 	 */
-- 
2.25.1

[PATCH AUTOSEL 4.19 073/106] net: dsa: mt7530: set CPU port to fallback mode

[Sasha Levin]

From: DENG Qingfang <dqfext@gmail.com>

[ Upstream commit 38152ea37d8bdaffa22603e0a5b5b86cfa8714c9 ]

Currently, setting a bridge's self PVID to other value and deleting
the default VID 1 renders untagged ports of that VLAN unable to talk to
the CPU port:

	bridge vlan add dev br0 vid 2 pvid untagged self
	bridge vlan del dev br0 vid 1 self
	bridge vlan add dev sw0p0 vid 2 pvid untagged
	bridge vlan del dev sw0p0 vid 1
	# br0 cannot send untagged frames out of sw0p0 anymore

That is because the CPU port is set to security mode and its PVID is
still 1, and untagged frames are dropped due to VLAN member violation.

Set the CPU port to fallback mode so untagged frames can pass through.

Fixes: 83163f7dca56 ("net: dsa: mediatek: add VLAN support for MT7530")
Signed-off-by: DENG Qingfang <dqfext@gmail.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/dsa/mt7530.c | 11 ++++++++---
 drivers/net/dsa/mt7530.h |  6 ++++++
 2 files changed, 14 insertions(+), 3 deletions(-)

diff --git a/drivers/net/dsa/mt7530.c b/drivers/net/dsa/mt7530.c
index 8b39a211ecb6..616afd81536a 100644
--- a/drivers/net/dsa/mt7530.c
+++ b/drivers/net/dsa/mt7530.c
@@ -860,10 +860,15 @@ mt7530_port_set_vlan_aware(struct dsa_switch *ds, int port)
 		   PCR_MATRIX_MASK, PCR_MATRIX(MT7530_ALL_MEMBERS));
 
 	/* Trapped into security mode allows packet forwarding through VLAN
-	 * table lookup.
+	 * table lookup. CPU port is set to fallback mode to let untagged
+	 * frames pass through.
 	 */
-	mt7530_rmw(priv, MT7530_PCR_P(port), PCR_PORT_VLAN_MASK,
-		   MT7530_PORT_SECURITY_MODE);
+	if (dsa_is_cpu_port(ds, port))
+		mt7530_rmw(priv, MT7530_PCR_P(port), PCR_PORT_VLAN_MASK,
+			   MT7530_PORT_FALLBACK_MODE);
+	else
+		mt7530_rmw(priv, MT7530_PCR_P(port), PCR_PORT_VLAN_MASK,
+			   MT7530_PORT_SECURITY_MODE);
 
 	/* Set the port as a user port which is to be able to recognize VID
 	 * from incoming packets before fetching entry within the VLAN table.
diff --git a/drivers/net/dsa/mt7530.h b/drivers/net/dsa/mt7530.h
index 403adbe5a4b4..101d309ee445 100644
--- a/drivers/net/dsa/mt7530.h
+++ b/drivers/net/dsa/mt7530.h
@@ -148,6 +148,12 @@ enum mt7530_port_mode {
 	/* Port Matrix Mode: Frames are forwarded by the PCR_MATRIX members. */
 	MT7530_PORT_MATRIX_MODE = PORT_VLAN(0),
 
+	/* Fallback Mode: Forward received frames with ingress ports that do
+	 * not belong to the VLAN member. Frames whose VID is not listed on
+	 * the VLAN table are forwarded by the PCR_MATRIX members.
+	 */
+	MT7530_PORT_FALLBACK_MODE = PORT_VLAN(1),
+
 	/* Security Mode: Discard any frame due to ingress membership
 	 * violation or VID missed on the VLAN table.
 	 */
-- 
2.25.1


_______________________________________________
Linux-mediatek mailing list
Linux-mediatek@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-mediatek

[PATCH AUTOSEL 4.19 073/106] net: dsa: mt7530: set CPU port to fallback mode

[Sasha Levin]

From: DENG Qingfang <dqfext@gmail.com>

[ Upstream commit 38152ea37d8bdaffa22603e0a5b5b86cfa8714c9 ]

Currently, setting a bridge's self PVID to other value and deleting
the default VID 1 renders untagged ports of that VLAN unable to talk to
the CPU port:

	bridge vlan add dev br0 vid 2 pvid untagged self
	bridge vlan del dev br0 vid 1 self
	bridge vlan add dev sw0p0 vid 2 pvid untagged
	bridge vlan del dev sw0p0 vid 1
	# br0 cannot send untagged frames out of sw0p0 anymore

That is because the CPU port is set to security mode and its PVID is
still 1, and untagged frames are dropped due to VLAN member violation.

Set the CPU port to fallback mode so untagged frames can pass through.

Fixes: 83163f7dca56 ("net: dsa: mediatek: add VLAN support for MT7530")
Signed-off-by: DENG Qingfang <dqfext@gmail.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/dsa/mt7530.c | 11 ++++++++---
 drivers/net/dsa/mt7530.h |  6 ++++++
 2 files changed, 14 insertions(+), 3 deletions(-)

diff --git a/drivers/net/dsa/mt7530.c b/drivers/net/dsa/mt7530.c
index 8b39a211ecb6..616afd81536a 100644
--- a/drivers/net/dsa/mt7530.c
+++ b/drivers/net/dsa/mt7530.c
@@ -860,10 +860,15 @@ mt7530_port_set_vlan_aware(struct dsa_switch *ds, int port)
 		   PCR_MATRIX_MASK, PCR_MATRIX(MT7530_ALL_MEMBERS));
 
 	/* Trapped into security mode allows packet forwarding through VLAN
-	 * table lookup.
+	 * table lookup. CPU port is set to fallback mode to let untagged
+	 * frames pass through.
 	 */
-	mt7530_rmw(priv, MT7530_PCR_P(port), PCR_PORT_VLAN_MASK,
-		   MT7530_PORT_SECURITY_MODE);
+	if (dsa_is_cpu_port(ds, port))
+		mt7530_rmw(priv, MT7530_PCR_P(port), PCR_PORT_VLAN_MASK,
+			   MT7530_PORT_FALLBACK_MODE);
+	else
+		mt7530_rmw(priv, MT7530_PCR_P(port), PCR_PORT_VLAN_MASK,
+			   MT7530_PORT_SECURITY_MODE);
 
 	/* Set the port as a user port which is to be able to recognize VID
 	 * from incoming packets before fetching entry within the VLAN table.
diff --git a/drivers/net/dsa/mt7530.h b/drivers/net/dsa/mt7530.h
index 403adbe5a4b4..101d309ee445 100644
--- a/drivers/net/dsa/mt7530.h
+++ b/drivers/net/dsa/mt7530.h
@@ -148,6 +148,12 @@ enum mt7530_port_mode {
 	/* Port Matrix Mode: Frames are forwarded by the PCR_MATRIX members. */
 	MT7530_PORT_MATRIX_MODE = PORT_VLAN(0),
 
+	/* Fallback Mode: Forward received frames with ingress ports that do
+	 * not belong to the VLAN member. Frames whose VID is not listed on
+	 * the VLAN table are forwarded by the PCR_MATRIX members.
+	 */
+	MT7530_PORT_FALLBACK_MODE = PORT_VLAN(1),
+
 	/* Security Mode: Discard any frame due to ingress membership
 	 * violation or VID missed on the VLAN table.
 	 */
-- 
2.25.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH AUTOSEL 4.19 074/106] veth: Adjust hard_start offset on redirect XDP frames

[Sasha Levin]

From: Jesper Dangaard Brouer <brouer@redhat.com>

[ Upstream commit 5c8572251fabc5bb49fd623c064e95a9daf6a3e3 ]

When native XDP redirect into a veth device, the frame arrives in the
xdp_frame structure. It is then processed in veth_xdp_rcv_one(),
which can run a new XDP bpf_prog on the packet. Doing so requires
converting xdp_frame to xdp_buff, but the tricky part is that
xdp_frame memory area is located in the top (data_hard_start) memory
area that xdp_buff will point into.

The current code tried to protect the xdp_frame area, by assigning
xdp_buff.data_hard_start past this memory. This results in 32 bytes
less headroom to expand into via BPF-helper bpf_xdp_adjust_head().

This protect step is actually not needed, because BPF-helper
bpf_xdp_adjust_head() already reserve this area, and don't allow
BPF-prog to expand into it. Thus, it is safe to point data_hard_start
directly at xdp_frame memory area.

Fixes: 9fc8d518d9d5 ("veth: Handle xdp_frames in xdp napi ring")
Reported-by: Mao Wenan <maowenan@huawei.com>
Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Toshiaki Makita <toshiaki.makita1@gmail.com>
Acked-by: Toke Høiland-Jørgensen <toke@redhat.com>
Link: https://lore.kernel.org/bpf/158945338331.97035.5923525383710752178.stgit@firesoul
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/veth.c | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)

diff --git a/drivers/net/veth.c b/drivers/net/veth.c
index 41a00cd76955..2abbad1abaf2 100644
--- a/drivers/net/veth.c
+++ b/drivers/net/veth.c
@@ -377,13 +377,15 @@ static struct sk_buff *veth_xdp_rcv_one(struct veth_rq *rq,
 					unsigned int *xdp_xmit)
 {
 	void *hard_start = frame->data - frame->headroom;
-	void *head = hard_start - sizeof(struct xdp_frame);
 	int len = frame->len, delta = 0;
 	struct xdp_frame orig_frame;
 	struct bpf_prog *xdp_prog;
 	unsigned int headroom;
 	struct sk_buff *skb;
 
+	/* bpf_xdp_adjust_head() assures BPF cannot access xdp_frame area */
+	hard_start -= sizeof(struct xdp_frame);
+
 	rcu_read_lock();
 	xdp_prog = rcu_dereference(rq->xdp_prog);
 	if (likely(xdp_prog)) {
@@ -405,7 +407,6 @@ static struct sk_buff *veth_xdp_rcv_one(struct veth_rq *rq,
 			break;
 		case XDP_TX:
 			orig_frame = *frame;
-			xdp.data_hard_start = head;
 			xdp.rxq->mem = frame->mem;
 			if (unlikely(veth_xdp_tx(rq->dev, &xdp) < 0)) {
 				trace_xdp_exception(rq->dev, xdp_prog, act);
@@ -417,7 +418,6 @@ static struct sk_buff *veth_xdp_rcv_one(struct veth_rq *rq,
 			goto xdp_xmit;
 		case XDP_REDIRECT:
 			orig_frame = *frame;
-			xdp.data_hard_start = head;
 			xdp.rxq->mem = frame->mem;
 			if (xdp_do_redirect(rq->dev, &xdp, xdp_prog)) {
 				frame = &orig_frame;
@@ -437,7 +437,7 @@ static struct sk_buff *veth_xdp_rcv_one(struct veth_rq *rq,
 	rcu_read_unlock();
 
 	headroom = sizeof(struct xdp_frame) + frame->headroom - delta;
-	skb = veth_build_skb(head, headroom, len, 0);
+	skb = veth_build_skb(hard_start, headroom, len, 0);
 	if (!skb) {
 		xdp_return_frame(frame);
 		goto err;
-- 
2.25.1

[PATCH AUTOSEL 4.19 075/106] net/mlx5e: IPoIB, Drop multicast packets that this interface sent

[Sasha Levin]

From: Erez Shitrit <erezsh@mellanox.com>

[ Upstream commit 8b46d424a743ddfef8056d5167f13ee7ebd1dcad ]

After enabled loopback packets for IPoIB, we need to drop these packets
that this HCA has replicated and came back to the same interface that
sent them.

Fixes: 4c6c615e3f30 ("net/mlx5e: IPoIB, Add PKEY child interface nic profile")
Signed-off-by: Erez Shitrit <erezsh@mellanox.com>
Reviewed-by: Alex Vesker <valex@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/mellanox/mlx5/core/en_rx.c | 15 ++++++++++++---
 1 file changed, 12 insertions(+), 3 deletions(-)

diff --git a/drivers/net/ethernet/mellanox/mlx5/core/en_rx.c b/drivers/net/ethernet/mellanox/mlx5/core/en_rx.c
index 044687a1f27c..9d86e49a7f44 100644
--- a/drivers/net/ethernet/mellanox/mlx5/core/en_rx.c
+++ b/drivers/net/ethernet/mellanox/mlx5/core/en_rx.c
@@ -1314,6 +1314,7 @@ int mlx5e_poll_rx_cq(struct mlx5e_cq *cq, int budget)
 
 #ifdef CONFIG_MLX5_CORE_IPOIB
 
+#define MLX5_IB_GRH_SGID_OFFSET 8
 #define MLX5_IB_GRH_DGID_OFFSET 24
 #define MLX5_GID_SIZE           16
 
@@ -1327,6 +1328,7 @@ static inline void mlx5i_complete_rx_cqe(struct mlx5e_rq *rq,
 	struct net_device *netdev;
 	struct mlx5e_priv *priv;
 	char *pseudo_header;
+	u32 flags_rqpn;
 	u32 qpn;
 	u8 *dgid;
 	u8 g;
@@ -1347,7 +1349,8 @@ static inline void mlx5i_complete_rx_cqe(struct mlx5e_rq *rq,
 	priv = mlx5i_epriv(netdev);
 	tstamp = &priv->tstamp;
 
-	g = (be32_to_cpu(cqe->flags_rqpn) >> 28) & 3;
+	flags_rqpn = be32_to_cpu(cqe->flags_rqpn);
+	g = (flags_rqpn >> 28) & 3;
 	dgid = skb->data + MLX5_IB_GRH_DGID_OFFSET;
 	if ((!g) || dgid[0] != 0xff)
 		skb->pkt_type = PACKET_HOST;
@@ -1356,9 +1359,15 @@ static inline void mlx5i_complete_rx_cqe(struct mlx5e_rq *rq,
 	else
 		skb->pkt_type = PACKET_MULTICAST;
 
-	/* TODO: IB/ipoib: Allow mcast packets from other VFs
-	 * 68996a6e760e5c74654723eeb57bf65628ae87f4
+	/* Drop packets that this interface sent, ie multicast packets
+	 * that the HCA has replicated.
 	 */
+	if (g && (qpn == (flags_rqpn & 0xffffff)) &&
+	    (memcmp(netdev->dev_addr + 4, skb->data + MLX5_IB_GRH_SGID_OFFSET,
+		    MLX5_GID_SIZE) == 0)) {
+		skb->dev = NULL;
+		return;
+	}
 
 	skb_pull(skb, MLX5_IB_GRH_BYTES);
 
-- 
2.25.1

[PATCH AUTOSEL 4.19 076/106] rtlwifi: Fix a double free in _rtl_usb_tx_urb_setup()

[Sasha Levin]

From: Dan Carpenter <dan.carpenter@oracle.com>

[ Upstream commit beb12813bc75d4a23de43b85ad1c7cb28d27631e ]

Seven years ago we tried to fix a leak but actually introduced a double
free instead.  It was an understandable mistake because the code was a
bit confusing and the free was done in the wrong place.  The "skb"
pointer is freed in both _rtl_usb_tx_urb_setup() and _rtl_usb_transmit().
The free belongs _rtl_usb_transmit() instead of _rtl_usb_tx_urb_setup()
and I've cleaned the code up a bit to hopefully make it more clear.

Fixes: 36ef0b473fbf ("rtlwifi: usb: add missing freeing of skbuff")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20200513093951.GD347693@mwanda
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/wireless/realtek/rtlwifi/usb.c | 8 ++------
 1 file changed, 2 insertions(+), 6 deletions(-)

diff --git a/drivers/net/wireless/realtek/rtlwifi/usb.c b/drivers/net/wireless/realtek/rtlwifi/usb.c
index 1181b725f503..1893640555c1 100644
--- a/drivers/net/wireless/realtek/rtlwifi/usb.c
+++ b/drivers/net/wireless/realtek/rtlwifi/usb.c
@@ -910,10 +910,8 @@ static struct urb *_rtl_usb_tx_urb_setup(struct ieee80211_hw *hw,
 
 	WARN_ON(NULL == skb);
 	_urb = usb_alloc_urb(0, GFP_ATOMIC);
-	if (!_urb) {
-		kfree_skb(skb);
+	if (!_urb)
 		return NULL;
-	}
 	_rtl_install_trx_info(rtlusb, skb, ep_num);
 	usb_fill_bulk_urb(_urb, rtlusb->udev, usb_sndbulkpipe(rtlusb->udev,
 			  ep_num), skb->data, skb->len, _rtl_tx_complete, skb);
@@ -927,7 +925,6 @@ static void _rtl_usb_transmit(struct ieee80211_hw *hw, struct sk_buff *skb,
 	struct rtl_usb *rtlusb = rtl_usbdev(rtl_usbpriv(hw));
 	u32 ep_num;
 	struct urb *_urb = NULL;
-	struct sk_buff *_skb = NULL;
 
 	WARN_ON(NULL == rtlusb->usb_tx_aggregate_hdl);
 	if (unlikely(IS_USB_STOP(rtlusb))) {
@@ -936,8 +933,7 @@ static void _rtl_usb_transmit(struct ieee80211_hw *hw, struct sk_buff *skb,
 		return;
 	}
 	ep_num = rtlusb->ep_map.ep_mapping[qnum];
-	_skb = skb;
-	_urb = _rtl_usb_tx_urb_setup(hw, _skb, ep_num);
+	_urb = _rtl_usb_tx_urb_setup(hw, skb, ep_num);
 	if (unlikely(!_urb)) {
 		pr_err("Can't allocate urb. Drop skb!\n");
 		kfree_skb(skb);
-- 
2.25.1

[PATCH AUTOSEL 4.19 077/106] mwifiex: Fix memory corruption in dump_station

[Sasha Levin]

From: Pali Rohár <pali@kernel.org>

[ Upstream commit 3aa42bae9c4d1641aeb36f1a8585cd1d506cf471 ]

The mwifiex_cfg80211_dump_station() uses static variable for iterating
over a linked list of all associated stations (when the driver is in UAP
role). This has a race condition if .dump_station is called in parallel
for multiple interfaces. This corruption can be triggered by registering
multiple SSIDs and calling, in parallel for multiple interfaces
    iw dev <iface> station dump

[16750.719775] Unable to handle kernel paging request at virtual address dead000000000110
...
[16750.899173] Call trace:
[16750.901696]  mwifiex_cfg80211_dump_station+0x94/0x100 [mwifiex]
[16750.907824]  nl80211_dump_station+0xbc/0x278 [cfg80211]
[16750.913160]  netlink_dump+0xe8/0x320
[16750.916827]  netlink_recvmsg+0x1b4/0x338
[16750.920861]  ____sys_recvmsg+0x7c/0x2b0
[16750.924801]  ___sys_recvmsg+0x70/0x98
[16750.928564]  __sys_recvmsg+0x58/0xa0
[16750.932238]  __arm64_sys_recvmsg+0x28/0x30
[16750.936453]  el0_svc_common.constprop.3+0x90/0x158
[16750.941378]  do_el0_svc+0x74/0x90
[16750.944784]  el0_sync_handler+0x12c/0x1a8
[16750.948903]  el0_sync+0x114/0x140
[16750.952312] Code: f9400003 f907f423 eb02007f 54fffd60 (b9401060)
[16750.958583] ---[ end trace c8ad181c2f4b8576 ]---

This patch drops the use of the static iterator, and instead every time
the function is called iterates to the idx-th position of the
linked-list.

It would be better to convert the code not to use linked list for
associated stations storage (since the chip has a limited number of
associated stations anyway - it could just be an array). Such a change
may be proposed in the future. In the meantime this patch can backported
into stable kernels in this simple form.

Fixes: 8baca1a34d4c ("mwifiex: dump station support in uap mode")
Signed-off-by: Pali Rohár <pali@kernel.org>
Acked-by: Ganapathi Bhat <ganapathi.bhat@nxp.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20200515075924.13841-1-pali@kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/wireless/marvell/mwifiex/cfg80211.c | 14 ++++++--------
 1 file changed, 6 insertions(+), 8 deletions(-)

diff --git a/drivers/net/wireless/marvell/mwifiex/cfg80211.c b/drivers/net/wireless/marvell/mwifiex/cfg80211.c
index 7b74ef71bef1..650191db25cb 100644
--- a/drivers/net/wireless/marvell/mwifiex/cfg80211.c
+++ b/drivers/net/wireless/marvell/mwifiex/cfg80211.c
@@ -1468,7 +1468,8 @@ mwifiex_cfg80211_dump_station(struct wiphy *wiphy, struct net_device *dev,
 			      int idx, u8 *mac, struct station_info *sinfo)
 {
 	struct mwifiex_private *priv = mwifiex_netdev_get_priv(dev);
-	static struct mwifiex_sta_node *node;
+	struct mwifiex_sta_node *node;
+	int i;
 
 	if ((GET_BSS_ROLE(priv) == MWIFIEX_BSS_ROLE_STA) &&
 	    priv->media_connected && idx == 0) {
@@ -1478,13 +1479,10 @@ mwifiex_cfg80211_dump_station(struct wiphy *wiphy, struct net_device *dev,
 		mwifiex_send_cmd(priv, HOST_CMD_APCMD_STA_LIST,
 				 HostCmd_ACT_GEN_GET, 0, NULL, true);
 
-		if (node && (&node->list == &priv->sta_list)) {
-			node = NULL;
-			return -ENOENT;
-		}
-
-		node = list_prepare_entry(node, &priv->sta_list, list);
-		list_for_each_entry_continue(node, &priv->sta_list, list) {
+		i = 0;
+		list_for_each_entry(node, &priv->sta_list, list) {
+			if (i++ != idx)
+				continue;
 			ether_addr_copy(mac, node->mac_addr);
 			return mwifiex_dump_station_info(priv, node, sinfo);
 		}
-- 
2.25.1

[PATCH AUTOSEL 4.19 078/106] x86/boot: Correct relocation destination on old linkers

[Sasha Levin]

From: Arvind Sankar <nivedita@alum.mit.edu>

[ Upstream commit 5214028dd89e49ba27007c3ee475279e584261f0 ]

For the 32-bit kernel, as described in

  6d92bc9d483a ("x86/build: Build compressed x86 kernels as PIE"),

pre-2.26 binutils generates R_386_32 relocations in PIE mode. Since the
startup code does not perform relocation, any reloc entry with R_386_32
will remain as 0 in the executing code.

Commit

  974f221c84b0 ("x86/boot: Move compressed kernel to the end of the
                 decompression buffer")

added a new symbol _end but did not mark it hidden, which doesn't give
the correct offset on older linkers. This causes the compressed kernel
to be copied beyond the end of the decompression buffer, rather than
flush against it. This region of memory may be reserved or already
allocated for other purposes by the bootloader.

Mark _end as hidden to fix. This changes the relocation from R_386_32 to
R_386_RELATIVE even on the pre-2.26 binutils.

For 64-bit, this is not strictly necessary, as the 64-bit kernel is only
built as PIE if the linker supports -z noreloc-overflow, which implies
binutils-2.27+, but for consistency, mark _end as hidden here too.

The below illustrates the before/after impact of the patch using
binutils-2.25 and gcc-4.6.4 (locally compiled from source) and QEMU.

  Disassembly before patch:
    48:   8b 86 60 02 00 00       mov    0x260(%esi),%eax
    4e:   2d 00 00 00 00          sub    $0x0,%eax
                          4f: R_386_32    _end
  Disassembly after patch:
    48:   8b 86 60 02 00 00       mov    0x260(%esi),%eax
    4e:   2d 00 f0 76 00          sub    $0x76f000,%eax
                          4f: R_386_RELATIVE      *ABS*

Dump from extract_kernel before patch:
	early console in extract_kernel
	input_data: 0x0207c098 <--- this is at output + init_size
	input_len: 0x0074fef1
	output: 0x01000000
	output_len: 0x00fa63d0
	kernel_total_size: 0x0107c000
	needed_size: 0x0107c000

Dump from extract_kernel after patch:
	early console in extract_kernel
	input_data: 0x0190d098 <--- this is at output + init_size - _end
	input_len: 0x0074fef1
	output: 0x01000000
	output_len: 0x00fa63d0
	kernel_total_size: 0x0107c000
	needed_size: 0x0107c000

Fixes: 974f221c84b0 ("x86/boot: Move compressed kernel to the end of the decompression buffer")
Signed-off-by: Arvind Sankar <nivedita@alum.mit.edu>
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lkml.kernel.org/r/20200207214926.3564079-1-nivedita@alum.mit.edu
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/x86/boot/compressed/head_32.S | 5 +++--
 arch/x86/boot/compressed/head_64.S | 1 +
 2 files changed, 4 insertions(+), 2 deletions(-)

diff --git a/arch/x86/boot/compressed/head_32.S b/arch/x86/boot/compressed/head_32.S
index 01d628ea3402..c6c4b877f3d2 100644
--- a/arch/x86/boot/compressed/head_32.S
+++ b/arch/x86/boot/compressed/head_32.S
@@ -49,16 +49,17 @@
  * Position Independent Executable (PIE) so that linker won't optimize
  * R_386_GOT32X relocation to its fixed symbol address.  Older
  * linkers generate R_386_32 relocations against locally defined symbols,
- * _bss, _ebss, _got and _egot, in PIE.  It isn't wrong, just less
+ * _bss, _ebss, _got, _egot and _end, in PIE.  It isn't wrong, just less
  * optimal than R_386_RELATIVE.  But the x86 kernel fails to properly handle
  * R_386_32 relocations when relocating the kernel.  To generate
- * R_386_RELATIVE relocations, we mark _bss, _ebss, _got and _egot as
+ * R_386_RELATIVE relocations, we mark _bss, _ebss, _got, _egot and _end as
  * hidden:
  */
 	.hidden _bss
 	.hidden _ebss
 	.hidden _got
 	.hidden _egot
+	.hidden _end
 
 	__HEAD
 ENTRY(startup_32)
diff --git a/arch/x86/boot/compressed/head_64.S b/arch/x86/boot/compressed/head_64.S
index 9fa644c62839..474733f8b330 100644
--- a/arch/x86/boot/compressed/head_64.S
+++ b/arch/x86/boot/compressed/head_64.S
@@ -42,6 +42,7 @@
 	.hidden _ebss
 	.hidden _got
 	.hidden _egot
+	.hidden _end
 
 	__HEAD
 	.code32
-- 
2.25.1

[PATCH AUTOSEL 4.19 079/106] mips: MAAR: Use more precise address mask

[Sasha Levin]

From: Serge Semin <Sergey.Semin@baikalelectronics.ru>

[ Upstream commit bbb5946eb545fab8ad8f46bce8a803e1c0c39d47 ]

Indeed according to the MIPS32 Privileged Resource Architecgture the MAAR
pair register address field either takes [12:31] bits for non-XPA systems
and [12:55] otherwise. In any case the current address mask is just
wrong for 64-bit and 32-bits XPA chips. So lets extend it to 59-bits
of physical address value. This shall cover the 64-bits architecture and
systems with XPA enabled, and won't cause any problem for non-XPA 32-bit
systems, since address values exceeding the architecture specific MAAR
mask will be just truncated with setting zeros in the unsupported upper
bits.

Co-developed-by: Alexey Malahov <Alexey.Malahov@baikalelectronics.ru>
Signed-off-by: Alexey Malahov <Alexey.Malahov@baikalelectronics.ru>
Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru>
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Cc: Paul Burton <paulburton@kernel.org>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Rob Herring <robh+dt@kernel.org>
Cc: devicetree@vger.kernel.org
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/mips/include/asm/mipsregs.h | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/mips/include/asm/mipsregs.h b/arch/mips/include/asm/mipsregs.h
index 1bb9448777c5..f9a7c137be9f 100644
--- a/arch/mips/include/asm/mipsregs.h
+++ b/arch/mips/include/asm/mipsregs.h
@@ -749,7 +749,7 @@
 
 /* MAAR bit definitions */
 #define MIPS_MAAR_VH		(_U64CAST_(1) << 63)
-#define MIPS_MAAR_ADDR		((BIT_ULL(BITS_PER_LONG - 12) - 1) << 12)
+#define MIPS_MAAR_ADDR		GENMASK_ULL(55, 12)
 #define MIPS_MAAR_ADDR_SHIFT	12
 #define MIPS_MAAR_S		(_ULCAST_(1) << 1)
 #define MIPS_MAAR_VL		(_ULCAST_(1) << 0)
-- 
2.25.1

[PATCH AUTOSEL 4.19 080/106] mips: Add udelay lpj numbers adjustment

[Sasha Levin]

From: Serge Semin <Sergey.Semin@baikalelectronics.ru>

[ Upstream commit ed26aacfb5f71eecb20a51c4467da440cb719d66 ]

Loops-per-jiffies is a special number which represents a number of
noop-loop cycles per CPU-scheduler quantum - jiffies. As you
understand aside from CPU-specific implementation it depends on
the CPU frequency. So when a platform has the CPU frequency fixed,
we have no problem and the current udelay interface will work
just fine. But as soon as CPU-freq driver is enabled and the cores
frequency changes, we'll end up with distorted udelay's. In order
to fix this we have to accordinly adjust the per-CPU udelay_val
(the same as the global loops_per_jiffy) number. This can be done
in the CPU-freq transition event handler. We subscribe to that event
in the MIPS arch time-inititalization method.

Co-developed-by: Alexey Malahov <Alexey.Malahov@baikalelectronics.ru>
Signed-off-by: Alexey Malahov <Alexey.Malahov@baikalelectronics.ru>
Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru>
Reviewed-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Cc: Paul Burton <paulburton@kernel.org>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Rob Herring <robh+dt@kernel.org>
Cc: devicetree@vger.kernel.org
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/mips/kernel/time.c | 70 +++++++++++++++++++++++++++++++++++++++++
 1 file changed, 70 insertions(+)

diff --git a/arch/mips/kernel/time.c b/arch/mips/kernel/time.c
index bfe02ded25d1..1e631a484ddf 100644
--- a/arch/mips/kernel/time.c
+++ b/arch/mips/kernel/time.c
@@ -22,12 +22,82 @@
 #include <linux/smp.h>
 #include <linux/spinlock.h>
 #include <linux/export.h>
+#include <linux/cpufreq.h>
+#include <linux/delay.h>
 
 #include <asm/cpu-features.h>
 #include <asm/cpu-type.h>
 #include <asm/div64.h>
 #include <asm/time.h>
 
+#ifdef CONFIG_CPU_FREQ
+
+static DEFINE_PER_CPU(unsigned long, pcp_lpj_ref);
+static DEFINE_PER_CPU(unsigned long, pcp_lpj_ref_freq);
+static unsigned long glb_lpj_ref;
+static unsigned long glb_lpj_ref_freq;
+
+static int cpufreq_callback(struct notifier_block *nb,
+			    unsigned long val, void *data)
+{
+	struct cpufreq_freqs *freq = data;
+	struct cpumask *cpus = freq->policy->cpus;
+	unsigned long lpj;
+	int cpu;
+
+	/*
+	 * Skip lpj numbers adjustment if the CPU-freq transition is safe for
+	 * the loops delay. (Is this possible?)
+	 */
+	if (freq->flags & CPUFREQ_CONST_LOOPS)
+		return NOTIFY_OK;
+
+	/* Save the initial values of the lpjes for future scaling. */
+	if (!glb_lpj_ref) {
+		glb_lpj_ref = boot_cpu_data.udelay_val;
+		glb_lpj_ref_freq = freq->old;
+
+		for_each_online_cpu(cpu) {
+			per_cpu(pcp_lpj_ref, cpu) =
+				cpu_data[cpu].udelay_val;
+			per_cpu(pcp_lpj_ref_freq, cpu) = freq->old;
+		}
+	}
+
+	/*
+	 * Adjust global lpj variable and per-CPU udelay_val number in
+	 * accordance with the new CPU frequency.
+	 */
+	if ((val == CPUFREQ_PRECHANGE  && freq->old < freq->new) ||
+	    (val == CPUFREQ_POSTCHANGE && freq->old > freq->new)) {
+		loops_per_jiffy = cpufreq_scale(glb_lpj_ref,
+						glb_lpj_ref_freq,
+						freq->new);
+
+		for_each_cpu(cpu, cpus) {
+			lpj = cpufreq_scale(per_cpu(pcp_lpj_ref, cpu),
+					    per_cpu(pcp_lpj_ref_freq, cpu),
+					    freq->new);
+			cpu_data[cpu].udelay_val = (unsigned int)lpj;
+		}
+	}
+
+	return NOTIFY_OK;
+}
+
+static struct notifier_block cpufreq_notifier = {
+	.notifier_call  = cpufreq_callback,
+};
+
+static int __init register_cpufreq_notifier(void)
+{
+	return cpufreq_register_notifier(&cpufreq_notifier,
+					 CPUFREQ_TRANSITION_NOTIFIER);
+}
+core_initcall(register_cpufreq_notifier);
+
+#endif /* CONFIG_CPU_FREQ */
+
 /*
  * forward reference
  */
-- 
2.25.1

[PATCH AUTOSEL 4.19 081/106] crypto: stm32/crc32 - fix ext4 chksum BUG_ON()

[Sasha Levin]

From: Nicolas Toromanoff <nicolas.toromanoff@st.com>

[ Upstream commit 49c2c082e00e0bc4f5cbb7c21c7f0f873b35ab09 ]

Allow use of crc_update without prior call to crc_init.
And change (and fix) driver to use CRC device even on unaligned buffers.

Fixes: b51dbe90912a ("crypto: stm32 - Support for STM32 CRC32 crypto module")

Signed-off-by: Nicolas Toromanoff <nicolas.toromanoff@st.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/crypto/stm32/stm32_crc32.c | 98 +++++++++++++++---------------
 1 file changed, 48 insertions(+), 50 deletions(-)

diff --git a/drivers/crypto/stm32/stm32_crc32.c b/drivers/crypto/stm32/stm32_crc32.c
index 29d2095d9dfd..749b51762b18 100644
--- a/drivers/crypto/stm32/stm32_crc32.c
+++ b/drivers/crypto/stm32/stm32_crc32.c
@@ -28,8 +28,10 @@
 
 /* Registers values */
 #define CRC_CR_RESET            BIT(0)
-#define CRC_CR_REVERSE          (BIT(7) | BIT(6) | BIT(5))
 #define CRC_INIT_DEFAULT        0xFFFFFFFF
+#define CRC_CR_REV_IN_WORD      (BIT(6) | BIT(5))
+#define CRC_CR_REV_IN_BYTE      BIT(5)
+#define CRC_CR_REV_OUT          BIT(7)
 
 #define CRC_AUTOSUSPEND_DELAY	50
 
@@ -38,8 +40,6 @@ struct stm32_crc {
 	struct device    *dev;
 	void __iomem     *regs;
 	struct clk       *clk;
-	u8               pending_data[sizeof(u32)];
-	size_t           nb_pending_bytes;
 };
 
 struct stm32_crc_list {
@@ -59,7 +59,6 @@ struct stm32_crc_ctx {
 
 struct stm32_crc_desc_ctx {
 	u32    partial; /* crc32c: partial in first 4 bytes of that struct */
-	struct stm32_crc *crc;
 };
 
 static int stm32_crc32_cra_init(struct crypto_tfm *tfm)
@@ -101,25 +100,22 @@ static int stm32_crc_init(struct shash_desc *desc)
 	struct stm32_crc *crc;
 
 	spin_lock_bh(&crc_list.lock);
-	list_for_each_entry(crc, &crc_list.dev_list, list) {
-		ctx->crc = crc;
-		break;
-	}
+	crc = list_first_entry(&crc_list.dev_list, struct stm32_crc, list);
 	spin_unlock_bh(&crc_list.lock);
 
-	pm_runtime_get_sync(ctx->crc->dev);
+	pm_runtime_get_sync(crc->dev);
 
 	/* Reset, set key, poly and configure in bit reverse mode */
-	writel_relaxed(bitrev32(mctx->key), ctx->crc->regs + CRC_INIT);
-	writel_relaxed(bitrev32(mctx->poly), ctx->crc->regs + CRC_POL);
-	writel_relaxed(CRC_CR_RESET | CRC_CR_REVERSE, ctx->crc->regs + CRC_CR);
+	writel_relaxed(bitrev32(mctx->key), crc->regs + CRC_INIT);
+	writel_relaxed(bitrev32(mctx->poly), crc->regs + CRC_POL);
+	writel_relaxed(CRC_CR_RESET | CRC_CR_REV_IN_WORD | CRC_CR_REV_OUT,
+		       crc->regs + CRC_CR);
 
 	/* Store partial result */
-	ctx->partial = readl_relaxed(ctx->crc->regs + CRC_DR);
-	ctx->crc->nb_pending_bytes = 0;
+	ctx->partial = readl_relaxed(crc->regs + CRC_DR);
 
-	pm_runtime_mark_last_busy(ctx->crc->dev);
-	pm_runtime_put_autosuspend(ctx->crc->dev);
+	pm_runtime_mark_last_busy(crc->dev);
+	pm_runtime_put_autosuspend(crc->dev);
 
 	return 0;
 }
@@ -128,31 +124,49 @@ static int stm32_crc_update(struct shash_desc *desc, const u8 *d8,
 			    unsigned int length)
 {
 	struct stm32_crc_desc_ctx *ctx = shash_desc_ctx(desc);
-	struct stm32_crc *crc = ctx->crc;
-	u32 *d32;
-	unsigned int i;
+	struct stm32_crc_ctx *mctx = crypto_shash_ctx(desc->tfm);
+	struct stm32_crc *crc;
+
+	spin_lock_bh(&crc_list.lock);
+	crc = list_first_entry(&crc_list.dev_list, struct stm32_crc, list);
+	spin_unlock_bh(&crc_list.lock);
 
 	pm_runtime_get_sync(crc->dev);
 
-	if (unlikely(crc->nb_pending_bytes)) {
-		while (crc->nb_pending_bytes != sizeof(u32) && length) {
-			/* Fill in pending data */
-			crc->pending_data[crc->nb_pending_bytes++] = *(d8++);
+	/*
+	 * Restore previously calculated CRC for this context as init value
+	 * Restore polynomial configuration
+	 * Configure in register for word input data,
+	 * Configure out register in reversed bit mode data.
+	 */
+	writel_relaxed(bitrev32(ctx->partial), crc->regs + CRC_INIT);
+	writel_relaxed(bitrev32(mctx->poly), crc->regs + CRC_POL);
+	writel_relaxed(CRC_CR_RESET | CRC_CR_REV_IN_WORD | CRC_CR_REV_OUT,
+		       crc->regs + CRC_CR);
+
+	if (d8 != PTR_ALIGN(d8, sizeof(u32))) {
+		/* Configure for byte data */
+		writel_relaxed(CRC_CR_REV_IN_BYTE | CRC_CR_REV_OUT,
+			       crc->regs + CRC_CR);
+		while (d8 != PTR_ALIGN(d8, sizeof(u32)) && length) {
+			writeb_relaxed(*d8++, crc->regs + CRC_DR);
 			length--;
 		}
-
-		if (crc->nb_pending_bytes == sizeof(u32)) {
-			/* Process completed pending data */
-			writel_relaxed(*(u32 *)crc->pending_data,
-				       crc->regs + CRC_DR);
-			crc->nb_pending_bytes = 0;
-		}
+		/* Configure for word data */
+		writel_relaxed(CRC_CR_REV_IN_WORD | CRC_CR_REV_OUT,
+			       crc->regs + CRC_CR);
 	}
 
-	d32 = (u32 *)d8;
-	for (i = 0; i < length >> 2; i++)
-		/* Process 32 bits data */
-		writel_relaxed(*(d32++), crc->regs + CRC_DR);
+	for (; length >= sizeof(u32); d8 += sizeof(u32), length -= sizeof(u32))
+		writel_relaxed(*((u32 *)d8), crc->regs + CRC_DR);
+
+	if (length) {
+		/* Configure for byte data */
+		writel_relaxed(CRC_CR_REV_IN_BYTE | CRC_CR_REV_OUT,
+			       crc->regs + CRC_CR);
+		while (length--)
+			writeb_relaxed(*d8++, crc->regs + CRC_DR);
+	}
 
 	/* Store partial result */
 	ctx->partial = readl_relaxed(crc->regs + CRC_DR);
@@ -160,22 +174,6 @@ static int stm32_crc_update(struct shash_desc *desc, const u8 *d8,
 	pm_runtime_mark_last_busy(crc->dev);
 	pm_runtime_put_autosuspend(crc->dev);
 
-	/* Check for pending data (non 32 bits) */
-	length &= 3;
-	if (likely(!length))
-		return 0;
-
-	if ((crc->nb_pending_bytes + length) >= sizeof(u32)) {
-		/* Shall not happen */
-		dev_err(crc->dev, "Pending data overflow\n");
-		return -EINVAL;
-	}
-
-	d8 = (const u8 *)d32;
-	for (i = 0; i < length; i++)
-		/* Store pending data */
-		crc->pending_data[crc->nb_pending_bytes++] = *(d8++);
-
 	return 0;
 }
 
-- 
2.25.1

[PATCH AUTOSEL 4.19 081/106] crypto: stm32/crc32 - fix ext4 chksum BUG_ON()

[Sasha Levin]

From: Nicolas Toromanoff <nicolas.toromanoff@st.com>

[ Upstream commit 49c2c082e00e0bc4f5cbb7c21c7f0f873b35ab09 ]

Allow use of crc_update without prior call to crc_init.
And change (and fix) driver to use CRC device even on unaligned buffers.

Fixes: b51dbe90912a ("crypto: stm32 - Support for STM32 CRC32 crypto module")

Signed-off-by: Nicolas Toromanoff <nicolas.toromanoff@st.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/crypto/stm32/stm32_crc32.c | 98 +++++++++++++++---------------
 1 file changed, 48 insertions(+), 50 deletions(-)

diff --git a/drivers/crypto/stm32/stm32_crc32.c b/drivers/crypto/stm32/stm32_crc32.c
index 29d2095d9dfd..749b51762b18 100644
--- a/drivers/crypto/stm32/stm32_crc32.c
+++ b/drivers/crypto/stm32/stm32_crc32.c
@@ -28,8 +28,10 @@
 
 /* Registers values */
 #define CRC_CR_RESET            BIT(0)
-#define CRC_CR_REVERSE          (BIT(7) | BIT(6) | BIT(5))
 #define CRC_INIT_DEFAULT        0xFFFFFFFF
+#define CRC_CR_REV_IN_WORD      (BIT(6) | BIT(5))
+#define CRC_CR_REV_IN_BYTE      BIT(5)
+#define CRC_CR_REV_OUT          BIT(7)
 
 #define CRC_AUTOSUSPEND_DELAY	50
 
@@ -38,8 +40,6 @@ struct stm32_crc {
 	struct device    *dev;
 	void __iomem     *regs;
 	struct clk       *clk;
-	u8               pending_data[sizeof(u32)];
-	size_t           nb_pending_bytes;
 };
 
 struct stm32_crc_list {
@@ -59,7 +59,6 @@ struct stm32_crc_ctx {
 
 struct stm32_crc_desc_ctx {
 	u32    partial; /* crc32c: partial in first 4 bytes of that struct */
-	struct stm32_crc *crc;
 };
 
 static int stm32_crc32_cra_init(struct crypto_tfm *tfm)
@@ -101,25 +100,22 @@ static int stm32_crc_init(struct shash_desc *desc)
 	struct stm32_crc *crc;
 
 	spin_lock_bh(&crc_list.lock);
-	list_for_each_entry(crc, &crc_list.dev_list, list) {
-		ctx->crc = crc;
-		break;
-	}
+	crc = list_first_entry(&crc_list.dev_list, struct stm32_crc, list);
 	spin_unlock_bh(&crc_list.lock);
 
-	pm_runtime_get_sync(ctx->crc->dev);
+	pm_runtime_get_sync(crc->dev);
 
 	/* Reset, set key, poly and configure in bit reverse mode */
-	writel_relaxed(bitrev32(mctx->key), ctx->crc->regs + CRC_INIT);
-	writel_relaxed(bitrev32(mctx->poly), ctx->crc->regs + CRC_POL);
-	writel_relaxed(CRC_CR_RESET | CRC_CR_REVERSE, ctx->crc->regs + CRC_CR);
+	writel_relaxed(bitrev32(mctx->key), crc->regs + CRC_INIT);
+	writel_relaxed(bitrev32(mctx->poly), crc->regs + CRC_POL);
+	writel_relaxed(CRC_CR_RESET | CRC_CR_REV_IN_WORD | CRC_CR_REV_OUT,
+		       crc->regs + CRC_CR);
 
 	/* Store partial result */
-	ctx->partial = readl_relaxed(ctx->crc->regs + CRC_DR);
-	ctx->crc->nb_pending_bytes = 0;
+	ctx->partial = readl_relaxed(crc->regs + CRC_DR);
 
-	pm_runtime_mark_last_busy(ctx->crc->dev);
-	pm_runtime_put_autosuspend(ctx->crc->dev);
+	pm_runtime_mark_last_busy(crc->dev);
+	pm_runtime_put_autosuspend(crc->dev);
 
 	return 0;
 }
@@ -128,31 +124,49 @@ static int stm32_crc_update(struct shash_desc *desc, const u8 *d8,
 			    unsigned int length)
 {
 	struct stm32_crc_desc_ctx *ctx = shash_desc_ctx(desc);
-	struct stm32_crc *crc = ctx->crc;
-	u32 *d32;
-	unsigned int i;
+	struct stm32_crc_ctx *mctx = crypto_shash_ctx(desc->tfm);
+	struct stm32_crc *crc;
+
+	spin_lock_bh(&crc_list.lock);
+	crc = list_first_entry(&crc_list.dev_list, struct stm32_crc, list);
+	spin_unlock_bh(&crc_list.lock);
 
 	pm_runtime_get_sync(crc->dev);
 
-	if (unlikely(crc->nb_pending_bytes)) {
-		while (crc->nb_pending_bytes != sizeof(u32) && length) {
-			/* Fill in pending data */
-			crc->pending_data[crc->nb_pending_bytes++] = *(d8++);
+	/*
+	 * Restore previously calculated CRC for this context as init value
+	 * Restore polynomial configuration
+	 * Configure in register for word input data,
+	 * Configure out register in reversed bit mode data.
+	 */
+	writel_relaxed(bitrev32(ctx->partial), crc->regs + CRC_INIT);
+	writel_relaxed(bitrev32(mctx->poly), crc->regs + CRC_POL);
+	writel_relaxed(CRC_CR_RESET | CRC_CR_REV_IN_WORD | CRC_CR_REV_OUT,
+		       crc->regs + CRC_CR);
+
+	if (d8 != PTR_ALIGN(d8, sizeof(u32))) {
+		/* Configure for byte data */
+		writel_relaxed(CRC_CR_REV_IN_BYTE | CRC_CR_REV_OUT,
+			       crc->regs + CRC_CR);
+		while (d8 != PTR_ALIGN(d8, sizeof(u32)) && length) {
+			writeb_relaxed(*d8++, crc->regs + CRC_DR);
 			length--;
 		}
-
-		if (crc->nb_pending_bytes == sizeof(u32)) {
-			/* Process completed pending data */
-			writel_relaxed(*(u32 *)crc->pending_data,
-				       crc->regs + CRC_DR);
-			crc->nb_pending_bytes = 0;
-		}
+		/* Configure for word data */
+		writel_relaxed(CRC_CR_REV_IN_WORD | CRC_CR_REV_OUT,
+			       crc->regs + CRC_CR);
 	}
 
-	d32 = (u32 *)d8;
-	for (i = 0; i < length >> 2; i++)
-		/* Process 32 bits data */
-		writel_relaxed(*(d32++), crc->regs + CRC_DR);
+	for (; length >= sizeof(u32); d8 += sizeof(u32), length -= sizeof(u32))
+		writel_relaxed(*((u32 *)d8), crc->regs + CRC_DR);
+
+	if (length) {
+		/* Configure for byte data */
+		writel_relaxed(CRC_CR_REV_IN_BYTE | CRC_CR_REV_OUT,
+			       crc->regs + CRC_CR);
+		while (length--)
+			writeb_relaxed(*d8++, crc->regs + CRC_DR);
+	}
 
 	/* Store partial result */
 	ctx->partial = readl_relaxed(crc->regs + CRC_DR);
@@ -160,22 +174,6 @@ static int stm32_crc_update(struct shash_desc *desc, const u8 *d8,
 	pm_runtime_mark_last_busy(crc->dev);
 	pm_runtime_put_autosuspend(crc->dev);
 
-	/* Check for pending data (non 32 bits) */
-	length &= 3;
-	if (likely(!length))
-		return 0;
-
-	if ((crc->nb_pending_bytes + length) >= sizeof(u32)) {
-		/* Shall not happen */
-		dev_err(crc->dev, "Pending data overflow\n");
-		return -EINVAL;
-	}
-
-	d8 = (const u8 *)d32;
-	for (i = 0; i < length; i++)
-		/* Store pending data */
-		crc->pending_data[crc->nb_pending_bytes++] = *(d8++);
-
 	return 0;
 }
 
-- 
2.25.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH AUTOSEL 4.19 082/106] crypto: stm32/crc32 - fix run-time self test issue.

[Sasha Levin]

From: Nicolas Toromanoff <nicolas.toromanoff@st.com>

[ Upstream commit a8cc3128bf2c01c4d448fe17149e87132113b445 ]

Fix wrong crc32 initialisation value:
"alg: shash: stm32_crc32 test failed (wrong result) on test vector 0,
cfg="init+update+final aligned buffer"
cra_name="crc32c" expects an init value of 0XFFFFFFFF,
cra_name="crc32" expects an init value of 0.

Fixes: b51dbe90912a ("crypto: stm32 - Support for STM32 CRC32 crypto module")

Signed-off-by: Nicolas Toromanoff <nicolas.toromanoff@st.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/crypto/stm32/stm32_crc32.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/drivers/crypto/stm32/stm32_crc32.c b/drivers/crypto/stm32/stm32_crc32.c
index 749b51762b18..c5ad83ad2f72 100644
--- a/drivers/crypto/stm32/stm32_crc32.c
+++ b/drivers/crypto/stm32/stm32_crc32.c
@@ -28,10 +28,10 @@
 
 /* Registers values */
 #define CRC_CR_RESET            BIT(0)
-#define CRC_INIT_DEFAULT        0xFFFFFFFF
 #define CRC_CR_REV_IN_WORD      (BIT(6) | BIT(5))
 #define CRC_CR_REV_IN_BYTE      BIT(5)
 #define CRC_CR_REV_OUT          BIT(7)
+#define CRC32C_INIT_DEFAULT     0xFFFFFFFF
 
 #define CRC_AUTOSUSPEND_DELAY	50
 
@@ -65,7 +65,7 @@ static int stm32_crc32_cra_init(struct crypto_tfm *tfm)
 {
 	struct stm32_crc_ctx *mctx = crypto_tfm_ctx(tfm);
 
-	mctx->key = CRC_INIT_DEFAULT;
+	mctx->key = 0;
 	mctx->poly = CRC32_POLY_LE;
 	return 0;
 }
@@ -74,7 +74,7 @@ static int stm32_crc32c_cra_init(struct crypto_tfm *tfm)
 {
 	struct stm32_crc_ctx *mctx = crypto_tfm_ctx(tfm);
 
-	mctx->key = CRC_INIT_DEFAULT;
+	mctx->key = CRC32C_INIT_DEFAULT;
 	mctx->poly = CRC32C_POLY_LE;
 	return 0;
 }
-- 
2.25.1

[PATCH AUTOSEL 4.19 082/106] crypto: stm32/crc32 - fix run-time self test issue.

[Sasha Levin]

From: Nicolas Toromanoff <nicolas.toromanoff@st.com>

[ Upstream commit a8cc3128bf2c01c4d448fe17149e87132113b445 ]

Fix wrong crc32 initialisation value:
"alg: shash: stm32_crc32 test failed (wrong result) on test vector 0,
cfg="init+update+final aligned buffer"
cra_name="crc32c" expects an init value of 0XFFFFFFFF,
cra_name="crc32" expects an init value of 0.

Fixes: b51dbe90912a ("crypto: stm32 - Support for STM32 CRC32 crypto module")

Signed-off-by: Nicolas Toromanoff <nicolas.toromanoff@st.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/crypto/stm32/stm32_crc32.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/drivers/crypto/stm32/stm32_crc32.c b/drivers/crypto/stm32/stm32_crc32.c
index 749b51762b18..c5ad83ad2f72 100644
--- a/drivers/crypto/stm32/stm32_crc32.c
+++ b/drivers/crypto/stm32/stm32_crc32.c
@@ -28,10 +28,10 @@
 
 /* Registers values */
 #define CRC_CR_RESET            BIT(0)
-#define CRC_INIT_DEFAULT        0xFFFFFFFF
 #define CRC_CR_REV_IN_WORD      (BIT(6) | BIT(5))
 #define CRC_CR_REV_IN_BYTE      BIT(5)
 #define CRC_CR_REV_OUT          BIT(7)
+#define CRC32C_INIT_DEFAULT     0xFFFFFFFF
 
 #define CRC_AUTOSUSPEND_DELAY	50
 
@@ -65,7 +65,7 @@ static int stm32_crc32_cra_init(struct crypto_tfm *tfm)
 {
 	struct stm32_crc_ctx *mctx = crypto_tfm_ctx(tfm);
 
-	mctx->key = CRC_INIT_DEFAULT;
+	mctx->key = 0;
 	mctx->poly = CRC32_POLY_LE;
 	return 0;
 }
@@ -74,7 +74,7 @@ static int stm32_crc32c_cra_init(struct crypto_tfm *tfm)
 {
 	struct stm32_crc_ctx *mctx = crypto_tfm_ctx(tfm);
 
-	mctx->key = CRC_INIT_DEFAULT;
+	mctx->key = CRC32C_INIT_DEFAULT;
 	mctx->poly = CRC32C_POLY_LE;
 	return 0;
 }
-- 
2.25.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH AUTOSEL 4.19 083/106] crypto: stm32/crc32 - fix multi-instance

[Sasha Levin]

From: Nicolas Toromanoff <nicolas.toromanoff@st.com>

[ Upstream commit 10b89c43a64eb0d236903b79a3bc9d8f6cbfd9c7 ]

Ensure CRC algorithm is registered only once in crypto framework when
there are several instances of CRC devices.

Update the CRC device list management to avoid that only the first CRC
instance is used.

Fixes: b51dbe90912a ("crypto: stm32 - Support for STM32 CRC32 crypto module")

Signed-off-by: Nicolas Toromanoff <nicolas.toromanoff@st.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/crypto/stm32/stm32_crc32.c | 48 ++++++++++++++++++++++--------
 1 file changed, 36 insertions(+), 12 deletions(-)

diff --git a/drivers/crypto/stm32/stm32_crc32.c b/drivers/crypto/stm32/stm32_crc32.c
index c5ad83ad2f72..47d31335c2d4 100644
--- a/drivers/crypto/stm32/stm32_crc32.c
+++ b/drivers/crypto/stm32/stm32_crc32.c
@@ -93,16 +93,29 @@ static int stm32_crc_setkey(struct crypto_shash *tfm, const u8 *key,
 	return 0;
 }
 
-static int stm32_crc_init(struct shash_desc *desc)
+static struct stm32_crc *stm32_crc_get_next_crc(void)
 {
-	struct stm32_crc_desc_ctx *ctx = shash_desc_ctx(desc);
-	struct stm32_crc_ctx *mctx = crypto_shash_ctx(desc->tfm);
 	struct stm32_crc *crc;
 
 	spin_lock_bh(&crc_list.lock);
 	crc = list_first_entry(&crc_list.dev_list, struct stm32_crc, list);
+	if (crc)
+		list_move_tail(&crc->list, &crc_list.dev_list);
 	spin_unlock_bh(&crc_list.lock);
 
+	return crc;
+}
+
+static int stm32_crc_init(struct shash_desc *desc)
+{
+	struct stm32_crc_desc_ctx *ctx = shash_desc_ctx(desc);
+	struct stm32_crc_ctx *mctx = crypto_shash_ctx(desc->tfm);
+	struct stm32_crc *crc;
+
+	crc = stm32_crc_get_next_crc();
+	if (!crc)
+		return -ENODEV;
+
 	pm_runtime_get_sync(crc->dev);
 
 	/* Reset, set key, poly and configure in bit reverse mode */
@@ -127,9 +140,9 @@ static int stm32_crc_update(struct shash_desc *desc, const u8 *d8,
 	struct stm32_crc_ctx *mctx = crypto_shash_ctx(desc->tfm);
 	struct stm32_crc *crc;
 
-	spin_lock_bh(&crc_list.lock);
-	crc = list_first_entry(&crc_list.dev_list, struct stm32_crc, list);
-	spin_unlock_bh(&crc_list.lock);
+	crc = stm32_crc_get_next_crc();
+	if (!crc)
+		return -ENODEV;
 
 	pm_runtime_get_sync(crc->dev);
 
@@ -202,6 +215,8 @@ static int stm32_crc_digest(struct shash_desc *desc, const u8 *data,
 	return stm32_crc_init(desc) ?: stm32_crc_finup(desc, data, length, out);
 }
 
+static unsigned int refcnt;
+static DEFINE_MUTEX(refcnt_lock);
 static struct shash_alg algs[] = {
 	/* CRC-32 */
 	{
@@ -294,12 +309,18 @@ static int stm32_crc_probe(struct platform_device *pdev)
 	list_add(&crc->list, &crc_list.dev_list);
 	spin_unlock(&crc_list.lock);
 
-	ret = crypto_register_shashes(algs, ARRAY_SIZE(algs));
-	if (ret) {
-		dev_err(dev, "Failed to register\n");
-		clk_disable_unprepare(crc->clk);
-		return ret;
+	mutex_lock(&refcnt_lock);
+	if (!refcnt) {
+		ret = crypto_register_shashes(algs, ARRAY_SIZE(algs));
+		if (ret) {
+			mutex_unlock(&refcnt_lock);
+			dev_err(dev, "Failed to register\n");
+			clk_disable_unprepare(crc->clk);
+			return ret;
+		}
 	}
+	refcnt++;
+	mutex_unlock(&refcnt_lock);
 
 	dev_info(dev, "Initialized\n");
 
@@ -320,7 +341,10 @@ static int stm32_crc_remove(struct platform_device *pdev)
 	list_del(&crc->list);
 	spin_unlock(&crc_list.lock);
 
-	crypto_unregister_shashes(algs, ARRAY_SIZE(algs));
+	mutex_lock(&refcnt_lock);
+	if (!--refcnt)
+		crypto_unregister_shashes(algs, ARRAY_SIZE(algs));
+	mutex_unlock(&refcnt_lock);
 
 	pm_runtime_disable(crc->dev);
 	pm_runtime_put_noidle(crc->dev);
-- 
2.25.1

[PATCH AUTOSEL 4.19 083/106] crypto: stm32/crc32 - fix multi-instance

[Sasha Levin]

From: Nicolas Toromanoff <nicolas.toromanoff@st.com>

[ Upstream commit 10b89c43a64eb0d236903b79a3bc9d8f6cbfd9c7 ]

Ensure CRC algorithm is registered only once in crypto framework when
there are several instances of CRC devices.

Update the CRC device list management to avoid that only the first CRC
instance is used.

Fixes: b51dbe90912a ("crypto: stm32 - Support for STM32 CRC32 crypto module")

Signed-off-by: Nicolas Toromanoff <nicolas.toromanoff@st.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/crypto/stm32/stm32_crc32.c | 48 ++++++++++++++++++++++--------
 1 file changed, 36 insertions(+), 12 deletions(-)

diff --git a/drivers/crypto/stm32/stm32_crc32.c b/drivers/crypto/stm32/stm32_crc32.c
index c5ad83ad2f72..47d31335c2d4 100644
--- a/drivers/crypto/stm32/stm32_crc32.c
+++ b/drivers/crypto/stm32/stm32_crc32.c
@@ -93,16 +93,29 @@ static int stm32_crc_setkey(struct crypto_shash *tfm, const u8 *key,
 	return 0;
 }
 
-static int stm32_crc_init(struct shash_desc *desc)
+static struct stm32_crc *stm32_crc_get_next_crc(void)
 {
-	struct stm32_crc_desc_ctx *ctx = shash_desc_ctx(desc);
-	struct stm32_crc_ctx *mctx = crypto_shash_ctx(desc->tfm);
 	struct stm32_crc *crc;
 
 	spin_lock_bh(&crc_list.lock);
 	crc = list_first_entry(&crc_list.dev_list, struct stm32_crc, list);
+	if (crc)
+		list_move_tail(&crc->list, &crc_list.dev_list);
 	spin_unlock_bh(&crc_list.lock);
 
+	return crc;
+}
+
+static int stm32_crc_init(struct shash_desc *desc)
+{
+	struct stm32_crc_desc_ctx *ctx = shash_desc_ctx(desc);
+	struct stm32_crc_ctx *mctx = crypto_shash_ctx(desc->tfm);
+	struct stm32_crc *crc;
+
+	crc = stm32_crc_get_next_crc();
+	if (!crc)
+		return -ENODEV;
+
 	pm_runtime_get_sync(crc->dev);
 
 	/* Reset, set key, poly and configure in bit reverse mode */
@@ -127,9 +140,9 @@ static int stm32_crc_update(struct shash_desc *desc, const u8 *d8,
 	struct stm32_crc_ctx *mctx = crypto_shash_ctx(desc->tfm);
 	struct stm32_crc *crc;
 
-	spin_lock_bh(&crc_list.lock);
-	crc = list_first_entry(&crc_list.dev_list, struct stm32_crc, list);
-	spin_unlock_bh(&crc_list.lock);
+	crc = stm32_crc_get_next_crc();
+	if (!crc)
+		return -ENODEV;
 
 	pm_runtime_get_sync(crc->dev);
 
@@ -202,6 +215,8 @@ static int stm32_crc_digest(struct shash_desc *desc, const u8 *data,
 	return stm32_crc_init(desc) ?: stm32_crc_finup(desc, data, length, out);
 }
 
+static unsigned int refcnt;
+static DEFINE_MUTEX(refcnt_lock);
 static struct shash_alg algs[] = {
 	/* CRC-32 */
 	{
@@ -294,12 +309,18 @@ static int stm32_crc_probe(struct platform_device *pdev)
 	list_add(&crc->list, &crc_list.dev_list);
 	spin_unlock(&crc_list.lock);
 
-	ret = crypto_register_shashes(algs, ARRAY_SIZE(algs));
-	if (ret) {
-		dev_err(dev, "Failed to register\n");
-		clk_disable_unprepare(crc->clk);
-		return ret;
+	mutex_lock(&refcnt_lock);
+	if (!refcnt) {
+		ret = crypto_register_shashes(algs, ARRAY_SIZE(algs));
+		if (ret) {
+			mutex_unlock(&refcnt_lock);
+			dev_err(dev, "Failed to register\n");
+			clk_disable_unprepare(crc->clk);
+			return ret;
+		}
 	}
+	refcnt++;
+	mutex_unlock(&refcnt_lock);
 
 	dev_info(dev, "Initialized\n");
 
@@ -320,7 +341,10 @@ static int stm32_crc_remove(struct platform_device *pdev)
 	list_del(&crc->list);
 	spin_unlock(&crc_list.lock);
 
-	crypto_unregister_shashes(algs, ARRAY_SIZE(algs));
+	mutex_lock(&refcnt_lock);
+	if (!--refcnt)
+		crypto_unregister_shashes(algs, ARRAY_SIZE(algs));
+	mutex_unlock(&refcnt_lock);
 
 	pm_runtime_disable(crc->dev);
 	pm_runtime_put_noidle(crc->dev);
-- 
2.25.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH AUTOSEL 4.19 084/106] x86/mm: Stop printing BRK addresses

[Sasha Levin]

From: Arvind Sankar <nivedita@alum.mit.edu>

[ Upstream commit 67d631b7c05eff955ccff4139327f0f92a5117e5 ]

This currently leaks kernel physical addresses into userspace.

Signed-off-by: Arvind Sankar <nivedita@alum.mit.edu>
Signed-off-by: Borislav Petkov <bp@suse.de>
Acked-by: Kees Cook <keescook@chromium.org>
Acked-by: Dave Hansen <dave.hansen@intel.com>
Link: https://lkml.kernel.org/r/20200229231120.1147527-1-nivedita@alum.mit.edu
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/x86/mm/init.c | 2 --
 1 file changed, 2 deletions(-)

diff --git a/arch/x86/mm/init.c b/arch/x86/mm/init.c
index fb5f29c60019..b1dba0987565 100644
--- a/arch/x86/mm/init.c
+++ b/arch/x86/mm/init.c
@@ -120,8 +120,6 @@ __ref void *alloc_low_pages(unsigned int num)
 	} else {
 		pfn = pgt_buf_end;
 		pgt_buf_end += num;
-		printk(KERN_DEBUG "BRK [%#010lx, %#010lx] PGTABLE\n",
-			pfn << PAGE_SHIFT, (pgt_buf_end << PAGE_SHIFT) - 1);
 	}
 
 	for (i = 0; i < num; i++) {
-- 
2.25.1

[PATCH AUTOSEL 4.19 085/106] m68k: mac: Don't call via_flush_cache() on Mac IIfx

[Sasha Levin]

From: Finn Thain <fthain@telegraphics.com.au>

[ Upstream commit bcc44f6b74106b31f0b0408b70305a40360d63b7 ]

There is no VIA2 chip on the Mac IIfx, so don't call via_flush_cache().
This avoids a boot crash which appeared in v5.4.

printk: console [ttyS0] enabled
printk: bootconsole [debug0] disabled
printk: bootconsole [debug0] disabled
Calibrating delay loop... 9.61 BogoMIPS (lpj=48064)
pid_max: default: 32768 minimum: 301
Mount-cache hash table entries: 1024 (order: 0, 4096 bytes, linear)
Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes, linear)
devtmpfs: initialized
random: get_random_u32 called from bucket_table_alloc.isra.27+0x68/0x194 with crng_init=0
clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
futex hash table entries: 256 (order: -1, 3072 bytes, linear)
NET: Registered protocol family 16
Data read fault at 0x00000000 in Super Data (pc=0x8a6a)
BAD KERNEL BUSERR
Oops: 00000000
Modules linked in:
PC: [<00008a6a>] via_flush_cache+0x12/0x2c
SR: 2700  SP: 01c1fe3c  a2: 01c24000
d0: 00001119    d1: 0000000c    d2: 00012000    d3: 0000000f
d4: 01c06840    d5: 00033b92    a0: 00000000    a1: 00000000
Process swapper (pid: 1, task=01c24000)
Frame format=B ssw=0755 isc=0200 isb=fff7 daddr=00000000 dobuf=01c1fed0
baddr=00008a6e dibuf=0000004e ver=f
Stack from 01c1fec4:
        01c1fed0 00007d7e 00010080 01c1fedc 0000792e 00000001 01c1fef4 00006b40
        01c80000 00040000 00000006 00000003 01c1ff1c 004a545e 004ff200 00040000
        00000000 00000003 01c06840 00033b92 004a5410 004b6c88 01c1ff84 000021e2
        00000073 00000003 01c06840 00033b92 0038507a 004bb094 004b6ca8 004b6c88
        004b6ca4 004b6c88 000021ae 00020002 00000000 01c0685d 00000000 01c1ffb4
        0049f938 00409c85 01c06840 0045bd40 00000073 00000002 00000002 00000000
Call Trace: [<00007d7e>] mac_cache_card_flush+0x12/0x1c
 [<00010080>] fix_dnrm+0x2/0x18
 [<0000792e>] cache_push+0x46/0x5a
 [<00006b40>] arch_dma_prep_coherent+0x60/0x6e
 [<00040000>] switched_to_dl+0x76/0xd0
 [<004a545e>] dma_atomic_pool_init+0x4e/0x188
 [<00040000>] switched_to_dl+0x76/0xd0
 [<00033b92>] parse_args+0x0/0x370
 [<004a5410>] dma_atomic_pool_init+0x0/0x188
 [<000021e2>] do_one_initcall+0x34/0x1be
 [<00033b92>] parse_args+0x0/0x370
 [<0038507a>] strcpy+0x0/0x1e
 [<000021ae>] do_one_initcall+0x0/0x1be
 [<00020002>] do_proc_dointvec_conv+0x54/0x74
 [<0049f938>] kernel_init_freeable+0x126/0x190
 [<0049f94c>] kernel_init_freeable+0x13a/0x190
 [<004a5410>] dma_atomic_pool_init+0x0/0x188
 [<00041798>] complete+0x0/0x3c
 [<000b9b0c>] kfree+0x0/0x20a
 [<0038df98>] schedule+0x0/0xd0
 [<0038d604>] kernel_init+0x0/0xda
 [<0038d610>] kernel_init+0xc/0xda
 [<0038d604>] kernel_init+0x0/0xda
 [<00002d38>] ret_from_kernel_thread+0xc/0x14
Code: 0000 2079 0048 10da 2279 0048 10c8 d3c8 <1011> 0200 fff7 1280 d1f9 0048 10c8 1010 0000 0008 1080 4e5e 4e75 4e56 0000 2039
Disabling lock debugging due to kernel taint
Kernel panic - not syncing: Attempted to kill init! exitcode=0x0000000b

Thanks to Stan Johnson for capturing the console log and running git
bisect.

Git bisect said commit 8e3a68fb55e0 ("dma-mapping: make
dma_atomic_pool_init self-contained") is the first "bad" commit. I don't
know why. Perhaps mach_l2_flush first became reachable with that commit.

Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Reported-and-tested-by: Stan Johnson <userm57@yahoo.com>
Signed-off-by: Finn Thain <fthain@telegraphics.com.au>
Cc: Joshua Thompson <funaho@jurai.org>
Link: https://lore.kernel.org/r/b8bbeef197d6b3898e82ed0d231ad08f575a4b34.1589949122.git.fthain@telegraphics.com.au
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/m68k/include/asm/mac_via.h |  1 +
 arch/m68k/mac/config.c          | 21 ++-------------------
 arch/m68k/mac/via.c             |  6 +++++-
 3 files changed, 8 insertions(+), 20 deletions(-)

diff --git a/arch/m68k/include/asm/mac_via.h b/arch/m68k/include/asm/mac_via.h
index de1470c4d829..1149251ea58d 100644
--- a/arch/m68k/include/asm/mac_via.h
+++ b/arch/m68k/include/asm/mac_via.h
@@ -257,6 +257,7 @@ extern int rbv_present,via_alt_mapping;
 
 struct irq_desc;
 
+extern void via_l2_flush(int writeback);
 extern void via_register_interrupts(void);
 extern void via_irq_enable(int);
 extern void via_irq_disable(int);
diff --git a/arch/m68k/mac/config.c b/arch/m68k/mac/config.c
index cd9317d53276..a4f91bea6c88 100644
--- a/arch/m68k/mac/config.c
+++ b/arch/m68k/mac/config.c
@@ -61,7 +61,6 @@ extern void iop_preinit(void);
 extern void iop_init(void);
 extern void via_init(void);
 extern void via_init_clock(irq_handler_t func);
-extern void via_flush_cache(void);
 extern void oss_init(void);
 extern void psc_init(void);
 extern void baboon_init(void);
@@ -132,21 +131,6 @@ int __init mac_parse_bootinfo(const struct bi_record *record)
 	return unknown;
 }
 
-/*
- * Flip into 24bit mode for an instant - flushes the L2 cache card. We
- * have to disable interrupts for this. Our IRQ handlers will crap
- * themselves if they take an IRQ in 24bit mode!
- */
-
-static void mac_cache_card_flush(int writeback)
-{
-	unsigned long flags;
-
-	local_irq_save(flags);
-	via_flush_cache();
-	local_irq_restore(flags);
-}
-
 void __init config_mac(void)
 {
 	if (!MACH_IS_MAC)
@@ -178,9 +162,8 @@ void __init config_mac(void)
 	 * not.
 	 */
 
-	if (macintosh_config->ident == MAC_MODEL_IICI
-	    || macintosh_config->ident == MAC_MODEL_IIFX)
-		mach_l2_flush = mac_cache_card_flush;
+	if (macintosh_config->ident == MAC_MODEL_IICI)
+		mach_l2_flush = via_l2_flush;
 }
 
 
diff --git a/arch/m68k/mac/via.c b/arch/m68k/mac/via.c
index 038d5a1c4d48..8307da441a10 100644
--- a/arch/m68k/mac/via.c
+++ b/arch/m68k/mac/via.c
@@ -289,10 +289,14 @@ void via_debug_dump(void)
  * the system into 24-bit mode for an instant.
  */
 
-void via_flush_cache(void)
+void via_l2_flush(int writeback)
 {
+	unsigned long flags;
+
+	local_irq_save(flags);
 	via2[gBufB] &= ~VIA2B_vMode32;
 	via2[gBufB] |= VIA2B_vMode32;
+	local_irq_restore(flags);
 }
 
 /*
-- 
2.25.1

[PATCH AUTOSEL 4.19 086/106] btrfs: qgroup: mark qgroup inconsistent if we're inherting snapshot to a new qgroup

[Sasha Levin]

From: Qu Wenruo <wqu@suse.com>

[ Upstream commit cbab8ade585a18c4334b085564d9d046e01a3f70 ]

[BUG]
For the following operation, qgroup is guaranteed to be screwed up due
to snapshot adding to a new qgroup:

  # mkfs.btrfs -f $dev
  # mount $dev $mnt
  # btrfs qgroup en $mnt
  # btrfs subv create $mnt/src
  # xfs_io -f -c "pwrite 0 1m" $mnt/src/file
  # sync
  # btrfs qgroup create 1/0 $mnt/src
  # btrfs subv snapshot -i 1/0 $mnt/src $mnt/snapshot
  # btrfs qgroup show -prce $mnt/src
  qgroupid         rfer         excl     max_rfer     max_excl parent  child
  --------         ----         ----     --------     -------- ------  -----
  0/5          16.00KiB     16.00KiB         none         none ---     ---
  0/257         1.02MiB     16.00KiB         none         none ---     ---
  0/258         1.02MiB     16.00KiB         none         none 1/0     ---
  1/0             0.00B        0.00B         none         none ---     0/258
	        ^^^^^^^^^^^^^^^^^^^^

[CAUSE]
The problem is in btrfs_qgroup_inherit(), we don't have good enough
check to determine if the new relation would break the existing
accounting.

Unlike btrfs_add_qgroup_relation(), which has proper check to determine
if we can do quick update without a rescan, in btrfs_qgroup_inherit() we
can even assign a snapshot to multiple qgroups.

[FIX]
Fix it by manually marking qgroup inconsistent for snapshot inheritance.

For subvolume creation, since all its extents are exclusively owned, we
don't need to rescan.

In theory, we should call relation check like quick_update_accounting()
when doing qgroup inheritance and inform user about qgroup accounting
inconsistency.

But we don't have good mechanism to relay that back to the user in the
snapshot creation context, thus we can only silently mark the qgroup
inconsistent.

Anyway, user shouldn't use qgroup inheritance during snapshot creation,
and should add qgroup relationship after snapshot creation by 'btrfs
qgroup assign', which has a much better UI to inform user about qgroup
inconsistent and kick in rescan automatically.

Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 fs/btrfs/qgroup.c | 14 ++++++++++++++
 1 file changed, 14 insertions(+)

diff --git a/fs/btrfs/qgroup.c b/fs/btrfs/qgroup.c
index cbd40826f5dc..c8ed4db73b84 100644
--- a/fs/btrfs/qgroup.c
+++ b/fs/btrfs/qgroup.c
@@ -2259,6 +2259,7 @@ int btrfs_qgroup_inherit(struct btrfs_trans_handle *trans, u64 srcid,
 	struct btrfs_root *quota_root;
 	struct btrfs_qgroup *srcgroup;
 	struct btrfs_qgroup *dstgroup;
+	bool need_rescan = false;
 	u32 level_size = 0;
 	u64 nums;
 
@@ -2402,6 +2403,13 @@ int btrfs_qgroup_inherit(struct btrfs_trans_handle *trans, u64 srcid,
 				goto unlock;
 		}
 		++i_qgroups;
+
+		/*
+		 * If we're doing a snapshot, and adding the snapshot to a new
+		 * qgroup, the numbers are guaranteed to be incorrect.
+		 */
+		if (srcid)
+			need_rescan = true;
 	}
 
 	for (i = 0; i <  inherit->num_ref_copies; ++i, i_qgroups += 2) {
@@ -2421,6 +2429,9 @@ int btrfs_qgroup_inherit(struct btrfs_trans_handle *trans, u64 srcid,
 
 		dst->rfer = src->rfer - level_size;
 		dst->rfer_cmpr = src->rfer_cmpr - level_size;
+
+		/* Manually tweaking numbers certainly needs a rescan */
+		need_rescan = true;
 	}
 	for (i = 0; i <  inherit->num_excl_copies; ++i, i_qgroups += 2) {
 		struct btrfs_qgroup *src;
@@ -2439,6 +2450,7 @@ int btrfs_qgroup_inherit(struct btrfs_trans_handle *trans, u64 srcid,
 
 		dst->excl = src->excl + level_size;
 		dst->excl_cmpr = src->excl_cmpr + level_size;
+		need_rescan = true;
 	}
 
 unlock:
@@ -2446,6 +2458,8 @@ int btrfs_qgroup_inherit(struct btrfs_trans_handle *trans, u64 srcid,
 out:
 	if (!committing)
 		mutex_unlock(&fs_info->qgroup_ioctl_lock);
+	if (need_rescan)
+		fs_info->qgroup_flags |= BTRFS_QGROUP_STATUS_FLAG_INCONSISTENT;
 	return ret;
 }
 
-- 
2.25.1

[PATCH AUTOSEL 4.19 087/106] net: ethernet: fec: move GPR register offset and bit into DT

[Sasha Levin]

From: Fugang Duan <fugang.duan@nxp.com>

[ Upstream commit 8a448bf832af537d26aa557d183a16943dce4510 ]

The commit da722186f654 (net: fec: set GPR bit on suspend by DT
configuration) set the GPR reigster offset and bit in driver for
wake on lan feature.

But it introduces two issues here:
- one SOC has two instances, they have different bit
- different SOCs may have different offset and bit

So to support wake-on-lan feature on other i.MX platforms, it should
configure the GPR reigster offset and bit from DT.

So the patch is to improve the commit da722186f654 (net: fec: set GPR
bit on suspend by DT configuration) to support multiple ethernet
instances on i.MX series.

v2:
 * switch back to store the quirks bitmask in driver_data
v3:
 * suggested by Sascha Hauer, use a struct fec_devinfo for
   abstracting differences between different hardware variants,
   it can give more freedom to describe the differences.

Signed-off-by: Fugang Duan <fugang.duan@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/freescale/fec_main.c | 24 +++++++++++------------
 1 file changed, 12 insertions(+), 12 deletions(-)

diff --git a/drivers/net/ethernet/freescale/fec_main.c b/drivers/net/ethernet/freescale/fec_main.c
index 48c58f93b124..6702bc2dd92f 100644
--- a/drivers/net/ethernet/freescale/fec_main.c
+++ b/drivers/net/ethernet/freescale/fec_main.c
@@ -88,8 +88,6 @@ static void fec_enet_itr_coal_init(struct net_device *ndev);
 
 struct fec_devinfo {
 	u32 quirks;
-	u8 stop_gpr_reg;
-	u8 stop_gpr_bit;
 };
 
 static const struct fec_devinfo fec_imx25_info = {
@@ -112,8 +110,6 @@ static const struct fec_devinfo fec_imx6q_info = {
 		  FEC_QUIRK_HAS_BUFDESC_EX | FEC_QUIRK_HAS_CSUM |
 		  FEC_QUIRK_HAS_VLAN | FEC_QUIRK_ERR006358 |
 		  FEC_QUIRK_HAS_RACC,
-	.stop_gpr_reg = 0x34,
-	.stop_gpr_bit = 27,
 };
 
 static const struct fec_devinfo fec_mvf600_info = {
@@ -3401,19 +3397,23 @@ static int fec_enet_get_irq_cnt(struct platform_device *pdev)
 }
 
 static int fec_enet_init_stop_mode(struct fec_enet_private *fep,
-				   struct fec_devinfo *dev_info,
 				   struct device_node *np)
 {
 	struct device_node *gpr_np;
+	u32 out_val[3];
 	int ret = 0;
 
-	if (!dev_info)
-		return 0;
-
-	gpr_np = of_parse_phandle(np, "gpr", 0);
+	gpr_np = of_parse_phandle(np, "fsl,stop-mode", 0);
 	if (!gpr_np)
 		return 0;
 
+	ret = of_property_read_u32_array(np, "fsl,stop-mode", out_val,
+					 ARRAY_SIZE(out_val));
+	if (ret) {
+		dev_dbg(&fep->pdev->dev, "no stop mode property\n");
+		return ret;
+	}
+
 	fep->stop_gpr.gpr = syscon_node_to_regmap(gpr_np);
 	if (IS_ERR(fep->stop_gpr.gpr)) {
 		dev_err(&fep->pdev->dev, "could not find gpr regmap\n");
@@ -3422,8 +3422,8 @@ static int fec_enet_init_stop_mode(struct fec_enet_private *fep,
 		goto out;
 	}
 
-	fep->stop_gpr.reg = dev_info->stop_gpr_reg;
-	fep->stop_gpr.bit = dev_info->stop_gpr_bit;
+	fep->stop_gpr.reg = out_val[1];
+	fep->stop_gpr.bit = out_val[2];
 
 out:
 	of_node_put(gpr_np);
@@ -3501,7 +3501,7 @@ fec_probe(struct platform_device *pdev)
 	if (of_get_property(np, "fsl,magic-packet", NULL))
 		fep->wol_flag |= FEC_WOL_HAS_MAGIC_PACKET;
 
-	ret = fec_enet_init_stop_mode(fep, dev_info, np);
+	ret = fec_enet_init_stop_mode(fep, np);
 	if (ret)
 		goto failed_stop_mode;
 
-- 
2.25.1

[PATCH AUTOSEL 4.19 088/106] macvlan: Skip loopback packets in RX handler

[Sasha Levin]

From: Alexander Sverdlin <alexander.sverdlin@nokia.com>

[ Upstream commit 81f3dc9349ce0bf7b8447f147f45e70f0a5b36a6 ]

Ignore loopback-originatig packets soon enough and don't try to process L2
header where it doesn't exist. The very similar br_handle_frame() in bridge
code performs exactly the same check.

This is an example of such ICMPv6 packet:

skb len=96 headroom=40 headlen=96 tailroom=56
mac=(40,0) net=(40,40) trans=80
shinfo(txflags=0 nr_frags=0 gso(size=0 type=0 segs=0))
csum(0xae2e9a2f ip_summed=1 complete_sw=0 valid=0 level=0)
hash(0xc97ebd88 sw=1 l4=1) proto=0x86dd pkttype=5 iif=24
dev name=etha01.212 feat=0x0x0000000040005000
skb headroom: 00000000: 00 7c 86 52 84 88 ff ff 00 00 00 00 00 00 08 00
skb headroom: 00000010: 45 00 00 9e 5d 5c 40 00 40 11 33 33 00 00 00 01
skb headroom: 00000020: 02 40 43 80 00 00 86 dd
skb linear:   00000000: 60 09 88 bd 00 38 3a ff fe 80 00 00 00 00 00 00
skb linear:   00000010: 00 40 43 ff fe 80 00 00 ff 02 00 00 00 00 00 00
skb linear:   00000020: 00 00 00 00 00 00 00 01 86 00 61 00 40 00 00 2d
skb linear:   00000030: 00 00 00 00 00 00 00 00 03 04 40 e0 00 00 01 2c
skb linear:   00000040: 00 00 00 78 00 00 00 00 fd 5f 42 68 23 87 a8 81
skb linear:   00000050: 00 00 00 00 00 00 00 00 01 01 02 40 43 80 00 00
skb tailroom: 00000000: ...
skb tailroom: 00000010: ...
skb tailroom: 00000020: ...
skb tailroom: 00000030: ...

Call Trace, how it happens exactly:
 ...
 macvlan_handle_frame+0x321/0x425 [macvlan]
 ? macvlan_forward_source+0x110/0x110 [macvlan]
 __netif_receive_skb_core+0x545/0xda0
 ? enqueue_task_fair+0xe5/0x8e0
 ? __netif_receive_skb_one_core+0x36/0x70
 __netif_receive_skb_one_core+0x36/0x70
 process_backlog+0x97/0x140
 net_rx_action+0x1eb/0x350
 ? __hrtimer_run_queues+0x136/0x2e0
 __do_softirq+0xe3/0x383
 do_softirq_own_stack+0x2a/0x40
 </IRQ>
 do_softirq.part.4+0x4e/0x50
 netif_rx_ni+0x60/0xd0
 dev_loopback_xmit+0x83/0xf0
 ip6_finish_output2+0x575/0x590 [ipv6]
 ? ip6_cork_release.isra.1+0x64/0x90 [ipv6]
 ? __ip6_make_skb+0x38d/0x680 [ipv6]
 ? ip6_output+0x6c/0x140 [ipv6]
 ip6_output+0x6c/0x140 [ipv6]
 ip6_send_skb+0x1e/0x60 [ipv6]
 rawv6_sendmsg+0xc4b/0xe10 [ipv6]
 ? proc_put_long+0xd0/0xd0
 ? rw_copy_check_uvector+0x4e/0x110
 ? sock_sendmsg+0x36/0x40
 sock_sendmsg+0x36/0x40
 ___sys_sendmsg+0x2b6/0x2d0
 ? proc_dointvec+0x23/0x30
 ? addrconf_sysctl_forward+0x8d/0x250 [ipv6]
 ? dev_forward_change+0x130/0x130 [ipv6]
 ? _raw_spin_unlock+0x12/0x30
 ? proc_sys_call_handler.isra.14+0x9f/0x110
 ? __call_rcu+0x213/0x510
 ? get_max_files+0x10/0x10
 ? trace_hardirqs_on+0x2c/0xe0
 ? __sys_sendmsg+0x63/0xa0
 __sys_sendmsg+0x63/0xa0
 do_syscall_64+0x6c/0x1e0
 entry_SYSCALL_64_after_hwframe+0x49/0xbe

Signed-off-by: Alexander Sverdlin <alexander.sverdlin@nokia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/macvlan.c | 4 ++++
 1 file changed, 4 insertions(+)

diff --git a/drivers/net/macvlan.c b/drivers/net/macvlan.c
index 225bfc808112..349123592af0 100644
--- a/drivers/net/macvlan.c
+++ b/drivers/net/macvlan.c
@@ -451,6 +451,10 @@ static rx_handler_result_t macvlan_handle_frame(struct sk_buff **pskb)
 	int ret;
 	rx_handler_result_t handle_res;
 
+	/* Packets from dev_loopback_xmit() do not have L2 header, bail out */
+	if (unlikely(skb->pkt_type == PACKET_LOOPBACK))
+		return RX_HANDLER_PASS;
+
 	port = macvlan_port_get_rcu(skb->dev);
 	if (is_multicast_ether_addr(eth->h_dest)) {
 		unsigned int hash;
-- 
2.25.1

[PATCH AUTOSEL 4.19 089/106] PCI: Don't disable decoding when mmio_always_on is set

[Sasha Levin]

From: Jiaxun Yang <jiaxun.yang@flygoat.com>

[ Upstream commit b6caa1d8c80cb71b6162cb1f1ec13aa655026c9f ]

Don't disable MEM/IO decoding when a device have both non_compliant_bars
and mmio_always_on.

That would allow us quirk devices with junk in BARs but can't disable
their decoding.

Signed-off-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Acked-by: Bjorn Helgaas <helgaas@kernel.org>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/pci/probe.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/pci/probe.c b/drivers/pci/probe.c
index fa4c386c8cd8..a21c04d8a40b 100644
--- a/drivers/pci/probe.c
+++ b/drivers/pci/probe.c
@@ -1634,7 +1634,7 @@ int pci_setup_device(struct pci_dev *dev)
 	/* Device class may be changed after fixup */
 	class = dev->class >> 8;
 
-	if (dev->non_compliant_bars) {
+	if (dev->non_compliant_bars && !dev->mmio_always_on) {
 		pci_read_config_word(dev, PCI_COMMAND, &cmd);
 		if (cmd & (PCI_COMMAND_IO | PCI_COMMAND_MEMORY)) {
 			pci_info(dev, "device has non-compliant BARs; disabling IO/MEM decoding\n");
-- 
2.25.1

[PATCH AUTOSEL 4.19 090/106] MIPS: Fix IRQ tracing when call handle_fpe() and handle_msa_fpe()

[Sasha Levin]

From: YuanJunQing <yuanjunqing66@163.com>

[ Upstream commit 31e1b3efa802f97a17628dde280006c4cee4ce5e ]

Register "a1" is unsaved in this function,
 when CONFIG_TRACE_IRQFLAGS is enabled,
 the TRACE_IRQS_OFF macro will call trace_hardirqs_off(),
 and this may change register "a1".
 The changed register "a1" as argument will be send
 to do_fpe() and do_msa_fpe().

Signed-off-by: YuanJunQing <yuanjunqing66@163.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/mips/kernel/genex.S | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/arch/mips/kernel/genex.S b/arch/mips/kernel/genex.S
index 6c257b52f57f..7fad007fe025 100644
--- a/arch/mips/kernel/genex.S
+++ b/arch/mips/kernel/genex.S
@@ -477,20 +477,20 @@ NESTED(nmi_handler, PT_SIZE, sp)
 	.endm
 
 	.macro	__build_clear_fpe
+	CLI
+	TRACE_IRQS_OFF
 	.set	push
 	/* gas fails to assemble cfc1 for some archs (octeon).*/ \
 	.set	mips1
 	SET_HARDFLOAT
 	cfc1	a1, fcr31
 	.set	pop
-	CLI
-	TRACE_IRQS_OFF
 	.endm
 
 	.macro	__build_clear_msa_fpe
-	_cfcmsa	a1, MSA_CSR
 	CLI
 	TRACE_IRQS_OFF
+	_cfcmsa	a1, MSA_CSR
 	.endm
 
 	.macro	__build_clear_ade
-- 
2.25.1

[PATCH AUTOSEL 4.19 091/106] bcache: fix refcount underflow in bcache_device_free()

[Sasha Levin]

From: Coly Li <colyli@suse.de>

[ Upstream commit 86da9f736740eba602389908574dfbb0f517baa5 ]

The problematic code piece in bcache_device_free() is,

 785 static void bcache_device_free(struct bcache_device *d)
 786 {
 787     struct gendisk *disk = d->disk;
 [snipped]
 799     if (disk) {
 800             if (disk->flags & GENHD_FL_UP)
 801                     del_gendisk(disk);
 802
 803             if (disk->queue)
 804                     blk_cleanup_queue(disk->queue);
 805
 806             ida_simple_remove(&bcache_device_idx,
 807                               first_minor_to_idx(disk->first_minor));
 808             put_disk(disk);
 809         }
 [snipped]
 816 }

At line 808, put_disk(disk) may encounter kobject refcount of 'disk'
being underflow.

Here is how to reproduce the issue,
- Attche the backing device to a cache device and do random write to
  make the cache being dirty.
- Stop the bcache device while the cache device has dirty data of the
  backing device.
- Only register the backing device back, NOT register cache device.
- The bcache device node /dev/bcache0 won't show up, because backing
  device waits for the cache device shows up for the missing dirty
  data.
- Now echo 1 into /sys/fs/bcache/pendings_cleanup, to stop the pending
  backing device.
- After the pending backing device stopped, use 'dmesg' to check kernel
  message, a use-after-free warning from KASA reported the refcount of
  kobject linked to the 'disk' is underflow.

The dropping refcount at line 808 in the above code piece is added by
add_disk(d->disk) in bch_cached_dev_run(). But in the above condition
the cache device is not registered, bch_cached_dev_run() has no chance
to be called and the refcount is not added. The put_disk() for a non-
added refcount of gendisk kobject triggers a underflow warning.

This patch checks whether GENHD_FL_UP is set in disk->flags, if it is
not set then the bcache device was not added, don't call put_disk()
and the the underflow issue can be avoided.

Signed-off-by: Coly Li <colyli@suse.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/md/bcache/super.c | 7 +++++--
 1 file changed, 5 insertions(+), 2 deletions(-)

diff --git a/drivers/md/bcache/super.c b/drivers/md/bcache/super.c
index 5b5cbfadd003..68ebc2759c2e 100644
--- a/drivers/md/bcache/super.c
+++ b/drivers/md/bcache/super.c
@@ -775,7 +775,9 @@ static void bcache_device_free(struct bcache_device *d)
 		bcache_device_detach(d);
 
 	if (disk) {
-		if (disk->flags & GENHD_FL_UP)
+		bool disk_added = (disk->flags & GENHD_FL_UP) != 0;
+
+		if (disk_added)
 			del_gendisk(disk);
 
 		if (disk->queue)
@@ -783,7 +785,8 @@ static void bcache_device_free(struct bcache_device *d)
 
 		ida_simple_remove(&bcache_device_idx,
 				  first_minor_to_idx(disk->first_minor));
-		put_disk(disk);
+		if (disk_added)
+			put_disk(disk);
 	}
 
 	bioset_exit(&d->bio_split);
-- 
2.25.1

[PATCH AUTOSEL 4.19 092/106] xfs: gut error handling in xfs_trans_unreserve_and_mod_sb()

[Sasha Levin]

From: Dave Chinner <david@fromorbit.com>

[ Upstream commit dc3ffbb14060c943469d5e12900db3a60bc3fa64 ]

xfs: gut error handling in xfs_trans_unreserve_and_mod_sb()

From: Dave Chinner <dchinner@redhat.com>

The error handling in xfs_trans_unreserve_and_mod_sb() is largely
incorrect - rolling back the changes in the transaction if only one
counter underruns makes all the other counters incorrect. We still
allow the change to proceed and committing the transaction, except
now we have multiple incorrect counters instead of a single
underflow.

Further, we don't actually report the error to the caller, so this
is completely silent except on debug kernels that will assert on
failure before we even get to the rollback code.  Hence this error
handling is broken, untested, and largely unnecessary complexity.

Just remove it.

Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 fs/xfs/xfs_trans.c | 163 ++++++---------------------------------------
 1 file changed, 20 insertions(+), 143 deletions(-)

diff --git a/fs/xfs/xfs_trans.c b/fs/xfs/xfs_trans.c
index 912b42f5fe4a..6da25cfadf30 100644
--- a/fs/xfs/xfs_trans.c
+++ b/fs/xfs/xfs_trans.c
@@ -530,57 +530,9 @@ xfs_trans_apply_sb_deltas(
 				  sizeof(sbp->sb_frextents) - 1);
 }
 
-STATIC int
-xfs_sb_mod8(
-	uint8_t			*field,
-	int8_t			delta)
-{
-	int8_t			counter = *field;
-
-	counter += delta;
-	if (counter < 0) {
-		ASSERT(0);
-		return -EINVAL;
-	}
-	*field = counter;
-	return 0;
-}
-
-STATIC int
-xfs_sb_mod32(
-	uint32_t		*field,
-	int32_t			delta)
-{
-	int32_t			counter = *field;
-
-	counter += delta;
-	if (counter < 0) {
-		ASSERT(0);
-		return -EINVAL;
-	}
-	*field = counter;
-	return 0;
-}
-
-STATIC int
-xfs_sb_mod64(
-	uint64_t		*field,
-	int64_t			delta)
-{
-	int64_t			counter = *field;
-
-	counter += delta;
-	if (counter < 0) {
-		ASSERT(0);
-		return -EINVAL;
-	}
-	*field = counter;
-	return 0;
-}
-
 /*
- * xfs_trans_unreserve_and_mod_sb() is called to release unused reservations
- * and apply superblock counter changes to the in-core superblock.  The
+ * xfs_trans_unreserve_and_mod_sb() is called to release unused reservations and
+ * apply superblock counter changes to the in-core superblock.  The
  * t_res_fdblocks_delta and t_res_frextents_delta fields are explicitly NOT
  * applied to the in-core superblock.  The idea is that that has already been
  * done.
@@ -625,20 +577,17 @@ xfs_trans_unreserve_and_mod_sb(
 	/* apply the per-cpu counters */
 	if (blkdelta) {
 		error = xfs_mod_fdblocks(mp, blkdelta, rsvd);
-		if (error)
-			goto out;
+		ASSERT(!error);
 	}
 
 	if (idelta) {
 		error = xfs_mod_icount(mp, idelta);
-		if (error)
-			goto out_undo_fdblocks;
+		ASSERT(!error);
 	}
 
 	if (ifreedelta) {
 		error = xfs_mod_ifree(mp, ifreedelta);
-		if (error)
-			goto out_undo_icount;
+		ASSERT(!error);
 	}
 
 	if (rtxdelta == 0 && !(tp->t_flags & XFS_TRANS_SB_DIRTY))
@@ -646,95 +595,23 @@ xfs_trans_unreserve_and_mod_sb(
 
 	/* apply remaining deltas */
 	spin_lock(&mp->m_sb_lock);
-	if (rtxdelta) {
-		error = xfs_sb_mod64(&mp->m_sb.sb_frextents, rtxdelta);
-		if (error)
-			goto out_undo_ifree;
-	}
-
-	if (tp->t_dblocks_delta != 0) {
-		error = xfs_sb_mod64(&mp->m_sb.sb_dblocks, tp->t_dblocks_delta);
-		if (error)
-			goto out_undo_frextents;
-	}
-	if (tp->t_agcount_delta != 0) {
-		error = xfs_sb_mod32(&mp->m_sb.sb_agcount, tp->t_agcount_delta);
-		if (error)
-			goto out_undo_dblocks;
-	}
-	if (tp->t_imaxpct_delta != 0) {
-		error = xfs_sb_mod8(&mp->m_sb.sb_imax_pct, tp->t_imaxpct_delta);
-		if (error)
-			goto out_undo_agcount;
-	}
-	if (tp->t_rextsize_delta != 0) {
-		error = xfs_sb_mod32(&mp->m_sb.sb_rextsize,
-				     tp->t_rextsize_delta);
-		if (error)
-			goto out_undo_imaxpct;
-	}
-	if (tp->t_rbmblocks_delta != 0) {
-		error = xfs_sb_mod32(&mp->m_sb.sb_rbmblocks,
-				     tp->t_rbmblocks_delta);
-		if (error)
-			goto out_undo_rextsize;
-	}
-	if (tp->t_rblocks_delta != 0) {
-		error = xfs_sb_mod64(&mp->m_sb.sb_rblocks, tp->t_rblocks_delta);
-		if (error)
-			goto out_undo_rbmblocks;
-	}
-	if (tp->t_rextents_delta != 0) {
-		error = xfs_sb_mod64(&mp->m_sb.sb_rextents,
-				     tp->t_rextents_delta);
-		if (error)
-			goto out_undo_rblocks;
-	}
-	if (tp->t_rextslog_delta != 0) {
-		error = xfs_sb_mod8(&mp->m_sb.sb_rextslog,
-				     tp->t_rextslog_delta);
-		if (error)
-			goto out_undo_rextents;
-	}
+	mp->m_sb.sb_frextents += rtxdelta;
+	mp->m_sb.sb_dblocks += tp->t_dblocks_delta;
+	mp->m_sb.sb_agcount += tp->t_agcount_delta;
+	mp->m_sb.sb_imax_pct += tp->t_imaxpct_delta;
+	mp->m_sb.sb_rextsize += tp->t_rextsize_delta;
+	mp->m_sb.sb_rbmblocks += tp->t_rbmblocks_delta;
+	mp->m_sb.sb_rblocks += tp->t_rblocks_delta;
+	mp->m_sb.sb_rextents += tp->t_rextents_delta;
+	mp->m_sb.sb_rextslog += tp->t_rextslog_delta;
 	spin_unlock(&mp->m_sb_lock);
-	return;
 
-out_undo_rextents:
-	if (tp->t_rextents_delta)
-		xfs_sb_mod64(&mp->m_sb.sb_rextents, -tp->t_rextents_delta);
-out_undo_rblocks:
-	if (tp->t_rblocks_delta)
-		xfs_sb_mod64(&mp->m_sb.sb_rblocks, -tp->t_rblocks_delta);
-out_undo_rbmblocks:
-	if (tp->t_rbmblocks_delta)
-		xfs_sb_mod32(&mp->m_sb.sb_rbmblocks, -tp->t_rbmblocks_delta);
-out_undo_rextsize:
-	if (tp->t_rextsize_delta)
-		xfs_sb_mod32(&mp->m_sb.sb_rextsize, -tp->t_rextsize_delta);
-out_undo_imaxpct:
-	if (tp->t_rextsize_delta)
-		xfs_sb_mod8(&mp->m_sb.sb_imax_pct, -tp->t_imaxpct_delta);
-out_undo_agcount:
-	if (tp->t_agcount_delta)
-		xfs_sb_mod32(&mp->m_sb.sb_agcount, -tp->t_agcount_delta);
-out_undo_dblocks:
-	if (tp->t_dblocks_delta)
-		xfs_sb_mod64(&mp->m_sb.sb_dblocks, -tp->t_dblocks_delta);
-out_undo_frextents:
-	if (rtxdelta)
-		xfs_sb_mod64(&mp->m_sb.sb_frextents, -rtxdelta);
-out_undo_ifree:
-	spin_unlock(&mp->m_sb_lock);
-	if (ifreedelta)
-		xfs_mod_ifree(mp, -ifreedelta);
-out_undo_icount:
-	if (idelta)
-		xfs_mod_icount(mp, -idelta);
-out_undo_fdblocks:
-	if (blkdelta)
-		xfs_mod_fdblocks(mp, -blkdelta, rsvd);
-out:
-	ASSERT(error == 0);
+	/*
+	 * Debug checks outside of the spinlock so they don't lock up the
+	 * machine if they fail.
+	 */
+	ASSERT(mp->m_sb.sb_imax_pct >= 0);
+	ASSERT(mp->m_sb.sb_rextslog >= 0);
 	return;
 }
 
-- 
2.25.1

[PATCH AUTOSEL 4.19 093/106] xfs: measure all contiguous previous extents for prealloc size

[Sasha Levin]

From: "Darrick J. Wong" <darrick.wong@oracle.com>

[ Upstream commit f0322c7cc05eb23ef034775f9b39254cbd4f3678 ]

When we're estimating a new speculative preallocation length for an
extending write, we should walk backwards through the extent list to
determine the number of number of blocks that are physically and
logically contiguous with the write offset, and use that as an input to
the preallocation size computation.

This way, preallocation length is truly measured by the effectiveness of
the allocator in giving us contiguous allocations without being
influenced by the state of a given extent.  This fixes both the problem
where ZERO_RANGE within an EOF can reduce preallocation, and prevents
the unnecessary shrinkage of preallocation when delalloc extents are
turned into unwritten extents.

This was found as a regression in xfs/014 after changing delalloc writes
to create unwritten extents during writeback.

Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 fs/xfs/xfs_iomap.c | 40 +++++++++++++++++++++++++++-------------
 1 file changed, 27 insertions(+), 13 deletions(-)

diff --git a/fs/xfs/xfs_iomap.c b/fs/xfs/xfs_iomap.c
index 6320aca39f39..f8c238992672 100644
--- a/fs/xfs/xfs_iomap.c
+++ b/fs/xfs/xfs_iomap.c
@@ -372,15 +372,17 @@ xfs_iomap_prealloc_size(
 	loff_t			count,
 	struct xfs_iext_cursor	*icur)
 {
+	struct xfs_iext_cursor	ncur = *icur;
+	struct xfs_bmbt_irec	prev, got;
 	struct xfs_mount	*mp = ip->i_mount;
 	struct xfs_ifork	*ifp = XFS_IFORK_PTR(ip, XFS_DATA_FORK);
 	xfs_fileoff_t		offset_fsb = XFS_B_TO_FSBT(mp, offset);
-	struct xfs_bmbt_irec	prev;
-	int			shift = 0;
 	int64_t			freesp;
 	xfs_fsblock_t		qblocks;
-	int			qshift = 0;
 	xfs_fsblock_t		alloc_blocks = 0;
+	xfs_extlen_t		plen;
+	int			shift = 0;
+	int			qshift = 0;
 
 	if (offset + count <= XFS_ISIZE(ip))
 		return 0;
@@ -395,7 +397,7 @@ xfs_iomap_prealloc_size(
 	 */
 	if ((mp->m_flags & XFS_MOUNT_DFLT_IOSIZE) ||
 	    XFS_ISIZE(ip) < XFS_FSB_TO_B(mp, mp->m_dalign) ||
-	    !xfs_iext_peek_prev_extent(ifp, icur, &prev) ||
+	    !xfs_iext_prev_extent(ifp, &ncur, &prev) ||
 	    prev.br_startoff + prev.br_blockcount < offset_fsb)
 		return mp->m_writeio_blocks;
 
@@ -408,16 +410,28 @@ xfs_iomap_prealloc_size(
 	 * preallocation size.
 	 *
 	 * If the extent is a hole, then preallocation is essentially disabled.
-	 * Otherwise we take the size of the preceding data extent as the basis
-	 * for the preallocation size. If the size of the extent is greater than
-	 * half the maximum extent length, then use the current offset as the
-	 * basis. This ensures that for large files the preallocation size
-	 * always extends to MAXEXTLEN rather than falling short due to things
-	 * like stripe unit/width alignment of real extents.
+	 * Otherwise we take the size of the preceding data extents as the basis
+	 * for the preallocation size. Note that we don't care if the previous
+	 * extents are written or not.
+	 *
+	 * If the size of the extents is greater than half the maximum extent
+	 * length, then use the current offset as the basis. This ensures that
+	 * for large files the preallocation size always extends to MAXEXTLEN
+	 * rather than falling short due to things like stripe unit/width
+	 * alignment of real extents.
 	 */
-	if (prev.br_blockcount <= (MAXEXTLEN >> 1))
-		alloc_blocks = prev.br_blockcount << 1;
-	else
+	plen = prev.br_blockcount;
+	while (xfs_iext_prev_extent(ifp, &ncur, &got)) {
+		if (plen > MAXEXTLEN / 2 ||
+		    isnullstartblock(got.br_startblock) ||
+		    got.br_startoff + got.br_blockcount != prev.br_startoff ||
+		    got.br_startblock + got.br_blockcount != prev.br_startblock)
+			break;
+		plen += got.br_blockcount;
+		prev = got;
+	}
+	alloc_blocks = plen * 2;
+	if (alloc_blocks > MAXEXTLEN)
 		alloc_blocks = XFS_B_TO_FSB(mp, offset);
 	if (!alloc_blocks)
 		goto check_writeio;
-- 
2.25.1

[PATCH AUTOSEL 4.19 094/106] mmc: sdhci-msm: Set SDHCI_QUIRK_MULTIBLOCK_READ_ACMD12 quirk

[Sasha Levin]

From: Veerabhadrarao Badiganti <vbadigan@codeaurora.org>

[ Upstream commit d863cb03fb2aac07f017b2a1d923cdbc35021280 ]

sdhci-msm can support auto cmd12.
So enable SDHCI_QUIRK_MULTIBLOCK_READ_ACMD12 quirk.

Signed-off-by: Veerabhadrarao Badiganti <vbadigan@codeaurora.org>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Link: https://lore.kernel.org/r/1587363626-20413-3-git-send-email-vbadigan@codeaurora.org
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/mmc/host/sdhci-msm.c | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

diff --git a/drivers/mmc/host/sdhci-msm.c b/drivers/mmc/host/sdhci-msm.c
index 19ae527ecc72..322f90b65826 100644
--- a/drivers/mmc/host/sdhci-msm.c
+++ b/drivers/mmc/host/sdhci-msm.c
@@ -1700,7 +1700,9 @@ static const struct sdhci_ops sdhci_msm_ops = {
 static const struct sdhci_pltfm_data sdhci_msm_pdata = {
 	.quirks = SDHCI_QUIRK_BROKEN_CARD_DETECTION |
 		  SDHCI_QUIRK_SINGLE_POWER_WRITE |
-		  SDHCI_QUIRK_CAP_CLOCK_BASE_BROKEN,
+		  SDHCI_QUIRK_CAP_CLOCK_BASE_BROKEN |
+		  SDHCI_QUIRK_MULTIBLOCK_READ_ACMD12,
+
 	.quirks2 = SDHCI_QUIRK2_PRESET_VALUE_BROKEN,
 	.ops = &sdhci_msm_ops,
 };
-- 
2.25.1

[PATCH AUTOSEL 4.19 095/106] staging: greybus: sdio: Respect the cmd->busy_timeout from the mmc core

[Sasha Levin]

From: Ulf Hansson <ulf.hansson@linaro.org>

[ Upstream commit a389087ee9f195fcf2f31cd771e9ec5f02c16650 ]

Using a fixed 1s timeout for all commands is a bit problematic.

For some commands it means waiting longer than needed for the timeout to
expire, which may not a big issue, but still. For other commands, like for
an erase (CMD38) that uses a R1B response, may require longer timeouts than
1s. In these cases, we may end up treating the command as it failed, while
it just needed some more time to complete successfully.

Fix the problem by respecting the cmd->busy_timeout, which is provided by
the mmc core.

Cc: Rui Miguel Silva <rmfrfs@gmail.com>
Cc: Johan Hovold <johan@kernel.org>
Cc: Alex Elder <elder@kernel.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: greybus-dev@lists.linaro.org
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Acked-by: Rui Miguel Silva <rmfrfs@gmail.com>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://lore.kernel.org/r/20200414161413.3036-20-ulf.hansson@linaro.org
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/staging/greybus/sdio.c | 10 +++++++---
 1 file changed, 7 insertions(+), 3 deletions(-)

diff --git a/drivers/staging/greybus/sdio.c b/drivers/staging/greybus/sdio.c
index 38e85033fc4b..afb2e5e5111a 100644
--- a/drivers/staging/greybus/sdio.c
+++ b/drivers/staging/greybus/sdio.c
@@ -411,6 +411,7 @@ static int gb_sdio_command(struct gb_sdio_host *host, struct mmc_command *cmd)
 	struct gb_sdio_command_request request = {0};
 	struct gb_sdio_command_response response;
 	struct mmc_data *data = host->mrq->data;
+	unsigned int timeout_ms;
 	u8 cmd_flags;
 	u8 cmd_type;
 	int i;
@@ -469,9 +470,12 @@ static int gb_sdio_command(struct gb_sdio_host *host, struct mmc_command *cmd)
 		request.data_blksz = cpu_to_le16(data->blksz);
 	}
 
-	ret = gb_operation_sync(host->connection, GB_SDIO_TYPE_COMMAND,
-				&request, sizeof(request), &response,
-				sizeof(response));
+	timeout_ms = cmd->busy_timeout ? cmd->busy_timeout :
+		GB_OPERATION_TIMEOUT_DEFAULT;
+
+	ret = gb_operation_sync_timeout(host->connection, GB_SDIO_TYPE_COMMAND,
+					&request, sizeof(request), &response,
+					sizeof(response), timeout_ms);
 	if (ret < 0)
 		goto out;
 
-- 
2.25.1

[PATCH AUTOSEL 4.19 095/106] staging: greybus: sdio: Respect the cmd->busy_timeout from the mmc core

[Sasha Levin]

From: Ulf Hansson <ulf.hansson@linaro.org>

[ Upstream commit a389087ee9f195fcf2f31cd771e9ec5f02c16650 ]

Using a fixed 1s timeout for all commands is a bit problematic.

For some commands it means waiting longer than needed for the timeout to
expire, which may not a big issue, but still. For other commands, like for
an erase (CMD38) that uses a R1B response, may require longer timeouts than
1s. In these cases, we may end up treating the command as it failed, while
it just needed some more time to complete successfully.

Fix the problem by respecting the cmd->busy_timeout, which is provided by
the mmc core.

Cc: Rui Miguel Silva <rmfrfs@gmail.com>
Cc: Johan Hovold <johan@kernel.org>
Cc: Alex Elder <elder@kernel.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: greybus-dev@lists.linaro.org
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Acked-by: Rui Miguel Silva <rmfrfs@gmail.com>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://lore.kernel.org/r/20200414161413.3036-20-ulf.hansson@linaro.org
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/staging/greybus/sdio.c | 10 +++++++---
 1 file changed, 7 insertions(+), 3 deletions(-)

diff --git a/drivers/staging/greybus/sdio.c b/drivers/staging/greybus/sdio.c
index 38e85033fc4b..afb2e5e5111a 100644
--- a/drivers/staging/greybus/sdio.c
+++ b/drivers/staging/greybus/sdio.c
@@ -411,6 +411,7 @@ static int gb_sdio_command(struct gb_sdio_host *host, struct mmc_command *cmd)
 	struct gb_sdio_command_request request = {0};
 	struct gb_sdio_command_response response;
 	struct mmc_data *data = host->mrq->data;
+	unsigned int timeout_ms;
 	u8 cmd_flags;
 	u8 cmd_type;
 	int i;
@@ -469,9 +470,12 @@ static int gb_sdio_command(struct gb_sdio_host *host, struct mmc_command *cmd)
 		request.data_blksz = cpu_to_le16(data->blksz);
 	}
 
-	ret = gb_operation_sync(host->connection, GB_SDIO_TYPE_COMMAND,
-				&request, sizeof(request), &response,
-				sizeof(response));
+	timeout_ms = cmd->busy_timeout ? cmd->busy_timeout :
+		GB_OPERATION_TIMEOUT_DEFAULT;
+
+	ret = gb_operation_sync_timeout(host->connection, GB_SDIO_TYPE_COMMAND,
+					&request, sizeof(request), &response,
+					sizeof(response), timeout_ms);
 	if (ret < 0)
 		goto out;
 
-- 
2.25.1

_______________________________________________
devel mailing list
devel@linuxdriverproject.org
http://driverdev.linuxdriverproject.org/mailman/listinfo/driverdev-devel

[PATCH AUTOSEL 4.19 096/106] mmc: via-sdmmc: Respect the cmd->busy_timeout from the mmc core

[Sasha Levin]

From: Ulf Hansson <ulf.hansson@linaro.org>

[ Upstream commit 966244ccd2919e28f25555a77f204cd1c109cad8 ]

Using a fixed 1s timeout for all commands (and data transfers) is a bit
problematic.

For some commands it means waiting longer than needed for the timer to
expire, which may not a big issue, but still. For other commands, like for
an erase (CMD38) that uses a R1B response, may require longer timeouts than
1s. In these cases, we may end up treating the command as it failed, while
it just needed some more time to complete successfully.

Fix the problem by respecting the cmd->busy_timeout, which is provided by
the mmc core.

Cc: Bruce Chang <brucechang@via.com.tw>
Cc: Harald Welte <HaraldWelte@viatech.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Link: https://lore.kernel.org/r/20200414161413.3036-17-ulf.hansson@linaro.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/mmc/host/via-sdmmc.c | 7 ++++++-
 1 file changed, 6 insertions(+), 1 deletion(-)

diff --git a/drivers/mmc/host/via-sdmmc.c b/drivers/mmc/host/via-sdmmc.c
index 32c4211506fc..246dc6255e69 100644
--- a/drivers/mmc/host/via-sdmmc.c
+++ b/drivers/mmc/host/via-sdmmc.c
@@ -323,6 +323,8 @@ struct via_crdr_mmc_host {
 /* some devices need a very long delay for power to stabilize */
 #define VIA_CRDR_QUIRK_300MS_PWRDELAY	0x0001
 
+#define VIA_CMD_TIMEOUT_MS		1000
+
 static const struct pci_device_id via_ids[] = {
 	{PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_9530,
 	  PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0,},
@@ -555,14 +557,17 @@ static void via_sdc_send_command(struct via_crdr_mmc_host *host,
 {
 	void __iomem *addrbase;
 	struct mmc_data *data;
+	unsigned int timeout_ms;
 	u32 cmdctrl = 0;
 
 	WARN_ON(host->cmd);
 
 	data = cmd->data;
-	mod_timer(&host->timer, jiffies + HZ);
 	host->cmd = cmd;
 
+	timeout_ms = cmd->busy_timeout ? cmd->busy_timeout : VIA_CMD_TIMEOUT_MS;
+	mod_timer(&host->timer, jiffies + msecs_to_jiffies(timeout_ms));
+
 	/*Command index*/
 	cmdctrl = cmd->opcode << 8;
 
-- 
2.25.1

[PATCH AUTOSEL 4.19 097/106] ixgbe: fix signed-integer-overflow warning

[Sasha Levin]

From: Xie XiuQi <xiexiuqi@huawei.com>

[ Upstream commit 3b70683fc4d68f5d915d9dc7e5ba72c732c7315c ]

ubsan report this warning, fix it by adding a unsigned suffix.

UBSAN: signed-integer-overflow in
drivers/net/ethernet/intel/ixgbe/ixgbe_common.c:2246:26
65535 * 65537 cannot be represented in type 'int'
CPU: 21 PID: 7 Comm: kworker/u256:0 Not tainted 5.7.0-rc3-debug+ #39
Hardware name: Huawei TaiShan 2280 V2/BC82AMDC, BIOS 2280-V2 03/27/2020
Workqueue: ixgbe ixgbe_service_task [ixgbe]
Call trace:
 dump_backtrace+0x0/0x3f0
 show_stack+0x28/0x38
 dump_stack+0x154/0x1e4
 ubsan_epilogue+0x18/0x60
 handle_overflow+0xf8/0x148
 __ubsan_handle_mul_overflow+0x34/0x48
 ixgbe_fc_enable_generic+0x4d0/0x590 [ixgbe]
 ixgbe_service_task+0xc20/0x1f78 [ixgbe]
 process_one_work+0x8f0/0xf18
 worker_thread+0x430/0x6d0
 kthread+0x218/0x238
 ret_from_fork+0x10/0x18

Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Xie XiuQi <xiexiuqi@huawei.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/intel/ixgbe/ixgbe_common.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_common.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_common.c
index 0bd1294ba517..39c5e6fdb72c 100644
--- a/drivers/net/ethernet/intel/ixgbe/ixgbe_common.c
+++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_common.c
@@ -2243,7 +2243,7 @@ s32 ixgbe_fc_enable_generic(struct ixgbe_hw *hw)
 	}
 
 	/* Configure pause time (2 TCs per register) */
-	reg = hw->fc.pause_time * 0x00010001;
+	reg = hw->fc.pause_time * 0x00010001U;
 	for (i = 0; i < (MAX_TRAFFIC_CLASS / 2); i++)
 		IXGBE_WRITE_REG(hw, IXGBE_FCTTV(i), reg);
 
-- 
2.25.1

[Intel-wired-lan] [PATCH AUTOSEL 4.19 097/106] ixgbe: fix signed-integer-overflow warning

[Sasha Levin]

From: Xie XiuQi <xiexiuqi@huawei.com>

[ Upstream commit 3b70683fc4d68f5d915d9dc7e5ba72c732c7315c ]

ubsan report this warning, fix it by adding a unsigned suffix.

UBSAN: signed-integer-overflow in
drivers/net/ethernet/intel/ixgbe/ixgbe_common.c:2246:26
65535 * 65537 cannot be represented in type 'int'
CPU: 21 PID: 7 Comm: kworker/u256:0 Not tainted 5.7.0-rc3-debug+ #39
Hardware name: Huawei TaiShan 2280 V2/BC82AMDC, BIOS 2280-V2 03/27/2020
Workqueue: ixgbe ixgbe_service_task [ixgbe]
Call trace:
 dump_backtrace+0x0/0x3f0
 show_stack+0x28/0x38
 dump_stack+0x154/0x1e4
 ubsan_epilogue+0x18/0x60
 handle_overflow+0xf8/0x148
 __ubsan_handle_mul_overflow+0x34/0x48
 ixgbe_fc_enable_generic+0x4d0/0x590 [ixgbe]
 ixgbe_service_task+0xc20/0x1f78 [ixgbe]
 process_one_work+0x8f0/0xf18
 worker_thread+0x430/0x6d0
 kthread+0x218/0x238
 ret_from_fork+0x10/0x18

Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Xie XiuQi <xiexiuqi@huawei.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/intel/ixgbe/ixgbe_common.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_common.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_common.c
index 0bd1294ba517..39c5e6fdb72c 100644
--- a/drivers/net/ethernet/intel/ixgbe/ixgbe_common.c
+++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_common.c
@@ -2243,7 +2243,7 @@ s32 ixgbe_fc_enable_generic(struct ixgbe_hw *hw)
 	}
 
 	/* Configure pause time (2 TCs per register) */
-	reg = hw->fc.pause_time * 0x00010001;
+	reg = hw->fc.pause_time * 0x00010001U;
 	for (i = 0; i < (MAX_TRAFFIC_CLASS / 2); i++)
 		IXGBE_WRITE_REG(hw, IXGBE_FCTTV(i), reg);
 
-- 
2.25.1

[PATCH AUTOSEL 4.19 098/106] mmc: sdhci-esdhc-imx: fix the mask for tuning start point

[Sasha Levin]

From: Haibo Chen <haibo.chen@nxp.com>

[ Upstream commit 1194be8c949b8190b2882ad8335a5d98aa50c735 ]

According the RM, the bit[6~0] of register ESDHC_TUNING_CTRL is
TUNING_START_TAP, bit[7] of this register is to disable the command
CRC check for standard tuning. So fix it here.

Fixes: d87fc9663688 ("mmc: sdhci-esdhc-imx: support setting tuning start point")
Signed-off-by: Haibo Chen <haibo.chen@nxp.com>
Link: https://lore.kernel.org/r/1590488522-9292-1-git-send-email-haibo.chen@nxp.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/mmc/host/sdhci-esdhc-imx.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/mmc/host/sdhci-esdhc-imx.c b/drivers/mmc/host/sdhci-esdhc-imx.c
index 629860f7327c..bd502f4f4704 100644
--- a/drivers/mmc/host/sdhci-esdhc-imx.c
+++ b/drivers/mmc/host/sdhci-esdhc-imx.c
@@ -82,7 +82,7 @@
 #define ESDHC_STD_TUNING_EN		(1 << 24)
 /* NOTE: the minimum valid tuning start tap for mx6sl is 1 */
 #define ESDHC_TUNING_START_TAP_DEFAULT	0x1
-#define ESDHC_TUNING_START_TAP_MASK	0xff
+#define ESDHC_TUNING_START_TAP_MASK	0x7f
 #define ESDHC_TUNING_STEP_MASK		0x00070000
 #define ESDHC_TUNING_STEP_SHIFT		16
 
-- 
2.25.1

[PATCH AUTOSEL 4.19 098/106] mmc: sdhci-esdhc-imx: fix the mask for tuning start point

[Sasha Levin]

From: Haibo Chen <haibo.chen@nxp.com>

[ Upstream commit 1194be8c949b8190b2882ad8335a5d98aa50c735 ]

According the RM, the bit[6~0] of register ESDHC_TUNING_CTRL is
TUNING_START_TAP, bit[7] of this register is to disable the command
CRC check for standard tuning. So fix it here.

Fixes: d87fc9663688 ("mmc: sdhci-esdhc-imx: support setting tuning start point")
Signed-off-by: Haibo Chen <haibo.chen@nxp.com>
Link: https://lore.kernel.org/r/1590488522-9292-1-git-send-email-haibo.chen@nxp.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/mmc/host/sdhci-esdhc-imx.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/mmc/host/sdhci-esdhc-imx.c b/drivers/mmc/host/sdhci-esdhc-imx.c
index 629860f7327c..bd502f4f4704 100644
--- a/drivers/mmc/host/sdhci-esdhc-imx.c
+++ b/drivers/mmc/host/sdhci-esdhc-imx.c
@@ -82,7 +82,7 @@
 #define ESDHC_STD_TUNING_EN		(1 << 24)
 /* NOTE: the minimum valid tuning start tap for mx6sl is 1 */
 #define ESDHC_TUNING_START_TAP_DEFAULT	0x1
-#define ESDHC_TUNING_START_TAP_MASK	0xff
+#define ESDHC_TUNING_START_TAP_MASK	0x7f
 #define ESDHC_TUNING_STEP_MASK		0x00070000
 #define ESDHC_TUNING_STEP_SHIFT		16
 
-- 
2.25.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH AUTOSEL 4.19 099/106] spi: dw: Return any value retrieved from the dma_transfer callback

[Sasha Levin]

From: Serge Semin <Sergey.Semin@baikalelectronics.ru>

[ Upstream commit f0410bbf7d0fb80149e3b17d11d31f5b5197873e ]

DW APB SSI DMA-part of the driver may need to perform the requested
SPI-transfer synchronously. In that case the dma_transfer() callback
will return 0 as a marker of the SPI transfer being finished so the
SPI core doesn't need to wait and may proceed with the SPI message
trasnfers pumping procedure. This will be needed to fix the problem
when DMA transactions are finished, but there is still data left in
the SPI Tx/Rx FIFOs being sent/received. But for now make dma_transfer
to return 1 as the normal dw_spi_transfer_one() method.

Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru>
Cc: Georgy Vlasov <Georgy.Vlasov@baikalelectronics.ru>
Cc: Ramil Zaripov <Ramil.Zaripov@baikalelectronics.ru>
Cc: Alexey Malahov <Alexey.Malahov@baikalelectronics.ru>
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: Feng Tang <feng.tang@intel.com>
Cc: Rob Herring <robh+dt@kernel.org>
Cc: linux-mips@vger.kernel.org
Cc: devicetree@vger.kernel.org
Link: https://lore.kernel.org/r/20200529131205.31838-3-Sergey.Semin@baikalelectronics.ru
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/spi/spi-dw-mid.c | 2 +-
 drivers/spi/spi-dw.c     | 7 ++-----
 2 files changed, 3 insertions(+), 6 deletions(-)

diff --git a/drivers/spi/spi-dw-mid.c b/drivers/spi/spi-dw-mid.c
index e1b34ef9a31c..10f328558d55 100644
--- a/drivers/spi/spi-dw-mid.c
+++ b/drivers/spi/spi-dw-mid.c
@@ -274,7 +274,7 @@ static int mid_spi_dma_transfer(struct dw_spi *dws, struct spi_transfer *xfer)
 		dma_async_issue_pending(dws->txchan);
 	}
 
-	return 0;
+	return 1;
 }
 
 static void mid_spi_dma_stop(struct dw_spi *dws)
diff --git a/drivers/spi/spi-dw.c b/drivers/spi/spi-dw.c
index 2207bf17f6a6..3724ac0f0032 100644
--- a/drivers/spi/spi-dw.c
+++ b/drivers/spi/spi-dw.c
@@ -380,11 +380,8 @@ static int dw_spi_transfer_one(struct spi_controller *master,
 
 	spi_enable_chip(dws, 1);
 
-	if (dws->dma_mapped) {
-		ret = dws->dma_ops->dma_transfer(dws, transfer);
-		if (ret < 0)
-			return ret;
-	}
+	if (dws->dma_mapped)
+		return dws->dma_ops->dma_transfer(dws, transfer);
 
 	if (chip->poll_mode)
 		return poll_transfer(dws);
-- 
2.25.1

[PATCH AUTOSEL 4.19 100/106] cpuidle: Fix three reference count leaks

[Sasha Levin]

From: Qiushi Wu <wu000273@umn.edu>

[ Upstream commit c343bf1ba5efcbf2266a1fe3baefec9cc82f867f ]

kobject_init_and_add() takes reference even when it fails.
If this function returns an error, kobject_put() must be called to
properly clean up the memory associated with the object.

Previous commit "b8eb718348b8" fixed a similar problem.

Signed-off-by: Qiushi Wu <wu000273@umn.edu>
[ rjw: Subject ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/cpuidle/sysfs.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/drivers/cpuidle/sysfs.c b/drivers/cpuidle/sysfs.c
index e754c7aae7f7..66979dc33680 100644
--- a/drivers/cpuidle/sysfs.c
+++ b/drivers/cpuidle/sysfs.c
@@ -467,7 +467,7 @@ static int cpuidle_add_state_sysfs(struct cpuidle_device *device)
 		ret = kobject_init_and_add(&kobj->kobj, &ktype_state_cpuidle,
 					   &kdev->kobj, "state%d", i);
 		if (ret) {
-			kfree(kobj);
+			kobject_put(&kobj->kobj);
 			goto error_state;
 		}
 		cpuidle_add_s2idle_attr_group(kobj);
@@ -598,7 +598,7 @@ static int cpuidle_add_driver_sysfs(struct cpuidle_device *dev)
 	ret = kobject_init_and_add(&kdrv->kobj, &ktype_driver_cpuidle,
 				   &kdev->kobj, "driver");
 	if (ret) {
-		kfree(kdrv);
+		kobject_put(&kdrv->kobj);
 		return ret;
 	}
 
@@ -692,7 +692,7 @@ int cpuidle_add_sysfs(struct cpuidle_device *dev)
 	error = kobject_init_and_add(&kdev->kobj, &ktype_cpuidle, &cpu_dev->kobj,
 				   "cpuidle");
 	if (error) {
-		kfree(kdev);
+		kobject_put(&kdev->kobj);
 		return error;
 	}
 
-- 
2.25.1

[PATCH AUTOSEL 4.19 101/106] platform/x86: hp-wmi: Convert simple_strtoul() to kstrtou32()

[Sasha Levin]

From: Andy Shevchenko <andriy.shevchenko@linux.intel.com>

[ Upstream commit 5cdc45ed3948042f0d73c6fec5ee9b59e637d0d2 ]

First of all, unsigned long can overflow u32 value on 64-bit machine.
Second, simple_strtoul() doesn't check for overflow in the input.

Convert simple_strtoul() to kstrtou32() to eliminate above issues.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/platform/x86/hp-wmi.c | 10 ++++++++--
 1 file changed, 8 insertions(+), 2 deletions(-)

diff --git a/drivers/platform/x86/hp-wmi.c b/drivers/platform/x86/hp-wmi.c
index 06a3c1ef8eee..952544ca0d84 100644
--- a/drivers/platform/x86/hp-wmi.c
+++ b/drivers/platform/x86/hp-wmi.c
@@ -474,8 +474,14 @@ static ssize_t postcode_show(struct device *dev, struct device_attribute *attr,
 static ssize_t als_store(struct device *dev, struct device_attribute *attr,
 			 const char *buf, size_t count)
 {
-	u32 tmp = simple_strtoul(buf, NULL, 10);
-	int ret = hp_wmi_perform_query(HPWMI_ALS_QUERY, HPWMI_WRITE, &tmp,
+	u32 tmp;
+	int ret;
+
+	ret = kstrtou32(buf, 10, &tmp);
+	if (ret)
+		return ret;
+
+	ret = hp_wmi_perform_query(HPWMI_ALS_QUERY, HPWMI_WRITE, &tmp,
 				       sizeof(tmp), sizeof(tmp));
 	if (ret)
 		return ret < 0 ? ret : -EINVAL;
-- 
2.25.1

[PATCH AUTOSEL 4.19 102/106] platform/x86: intel-hid: Add a quirk to support HP Spectre X2 (2015)

[Sasha Levin]

From: Nickolai Kozachenko <daemongloom@gmail.com>

[ Upstream commit 8fe63eb757ac6e661a384cc760792080bdc738dc ]

HEBC method reports capabilities of 5 button array but HP Spectre X2 (2015)
does not have this control method (the same was for Wacom MobileStudio Pro).
Expand previous DMI quirk by Alex Hung to also enable 5 button array
for this system.

Signed-off-by: Nickolai Kozachenko <daemongloom@gmail.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/platform/x86/intel-hid.c | 7 +++++++
 1 file changed, 7 insertions(+)

diff --git a/drivers/platform/x86/intel-hid.c b/drivers/platform/x86/intel-hid.c
index 3201a83073b5..c514cb73bb50 100644
--- a/drivers/platform/x86/intel-hid.c
+++ b/drivers/platform/x86/intel-hid.c
@@ -87,6 +87,13 @@ static const struct dmi_system_id button_array_table[] = {
 			DMI_MATCH(DMI_PRODUCT_NAME, "Wacom MobileStudio Pro 16"),
 		},
 	},
+	{
+		.ident = "HP Spectre x2 (2015)",
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "HP"),
+			DMI_MATCH(DMI_PRODUCT_NAME, "HP Spectre x2 Detachable"),
+		},
+	},
 	{ }
 };
 
-- 
2.25.1

[PATCH AUTOSEL 4.19 103/106] platform/x86: intel-vbtn: Only blacklist SW_TABLET_MODE on the 9 / "Laptop" chasis-type

[Sasha Levin]

From: Hans de Goede <hdegoede@redhat.com>

[ Upstream commit cfae58ed681c5fe0185db843013ecc71cd265ebf ]

The HP Stream x360 11-p000nd no longer report SW_TABLET_MODE state / events
with recent kernels. This model reports a chassis-type of 10 / "Notebook"
which is not on the recently introduced chassis-type whitelist

Commit de9647efeaa9 ("platform/x86: intel-vbtn: Only activate tablet mode
switch on 2-in-1's") added a chassis-type whitelist and only listed 31 /
"Convertible" as being capable of generating valid SW_TABLET_MOD events.

Commit 1fac39fd0316 ("platform/x86: intel-vbtn: Also handle tablet-mode
switch on "Detachable" and "Portable" chassis-types") extended the
whitelist with chassis-types 8 / "Portable" and 32 / "Detachable".

And now we need to exten the whitelist again with 10 / "Notebook"...

The issue original fixed by the whitelist is really a ACPI DSDT bug on
the Dell XPS 9360 where it has a VGBS which reports it is in tablet mode
even though it is not a 2-in-1 at all, but a regular laptop.

So since this is a workaround for a DSDT issue on that specific model,
instead of extending the whitelist over and over again, lets switch to
a blacklist and only blacklist the chassis-type of the model for which
the chassis-type check was added.

Note this also fixes the current version of the code no longer checking
if dmi_get_system_info(DMI_CHASSIS_TYPE) returns NULL.

Fixes: 1fac39fd0316 ("platform/x86: intel-vbtn: Also handle tablet-mode switch on "Detachable" and "Portable" chassis-types")
Cc: Mario Limonciello <mario.limonciello@dell.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Mario Limonciello <Mario.limonciello@dell.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/platform/x86/intel-vbtn.c | 19 ++++++++-----------
 1 file changed, 8 insertions(+), 11 deletions(-)

diff --git a/drivers/platform/x86/intel-vbtn.c b/drivers/platform/x86/intel-vbtn.c
index 5f8120d12859..d122f33d43ac 100644
--- a/drivers/platform/x86/intel-vbtn.c
+++ b/drivers/platform/x86/intel-vbtn.c
@@ -157,21 +157,18 @@ static void detect_tablet_mode(struct platform_device *device)
 static bool intel_vbtn_has_switches(acpi_handle handle)
 {
 	const char *chassis_type = dmi_get_system_info(DMI_CHASSIS_TYPE);
-	unsigned long chassis_type_int;
 	unsigned long long vgbs;
 	acpi_status status;
 
-	if (kstrtoul(chassis_type, 10, &chassis_type_int))
-		return false;
-
-	switch (chassis_type_int) {
-	case  8: /* Portable */
-	case 31: /* Convertible */
-	case 32: /* Detachable */
-		break;
-	default:
+	/*
+	 * Some normal laptops have a VGBS method despite being non-convertible
+	 * and their VGBS method always returns 0, causing detect_tablet_mode()
+	 * to report SW_TABLET_MODE=1 to userspace, which causes issues.
+	 * These laptops have a DMI chassis_type of 9 ("Laptop"), do not report
+	 * switches on any devices with a DMI chassis_type of 9.
+	 */
+	if (chassis_type && strcmp(chassis_type, "9") == 0)
 		return false;
-	}
 
 	status = acpi_evaluate_integer(handle, "VGBS", NULL, &vgbs);
 	return ACPI_SUCCESS(status);
-- 
2.25.1

[PATCH AUTOSEL 4.19 104/106] vxlan: Avoid infinite loop when suppressing NS messages with invalid options

[Sasha Levin]

From: Ido Schimmel <idosch@mellanox.com>

[ Upstream commit 8066e6b449e050675df48e7c4b16c29f00507ff0 ]

When proxy mode is enabled the vxlan device might reply to Neighbor
Solicitation (NS) messages on behalf of remote hosts.

In case the NS message includes the "Source link-layer address" option
[1], the vxlan device will use the specified address as the link-layer
destination address in its reply.

To avoid an infinite loop, break out of the options parsing loop when
encountering an option with length zero and disregard the NS message.

This is consistent with the IPv6 ndisc code and RFC 4886 which states
that "Nodes MUST silently discard an ND packet that contains an option
with length zero" [2].

[1] https://tools.ietf.org/html/rfc4861#section-4.3
[2] https://tools.ietf.org/html/rfc4861#section-4.6

Fixes: 4b29dba9c085 ("vxlan: fix nonfunctional neigh_reduce()")
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Acked-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/vxlan.c | 4 ++++
 1 file changed, 4 insertions(+)

diff --git a/drivers/net/vxlan.c b/drivers/net/vxlan.c
index 7ee0bad18466..09f0b53b2b77 100644
--- a/drivers/net/vxlan.c
+++ b/drivers/net/vxlan.c
@@ -1611,6 +1611,10 @@ static struct sk_buff *vxlan_na_create(struct sk_buff *request,
 	ns_olen = request->len - skb_network_offset(request) -
 		sizeof(struct ipv6hdr) - sizeof(*ns);
 	for (i = 0; i < ns_olen-1; i += (ns->opt[i+1]<<3)) {
+		if (!ns->opt[i + 1]) {
+			kfree_skb(reply);
+			return NULL;
+		}
 		if (ns->opt[i] == ND_OPT_SOURCE_LL_ADDR) {
 			daddr = ns->opt + i + sizeof(struct nd_opt_hdr);
 			break;
-- 
2.25.1

[PATCH AUTOSEL 4.19 105/106] net_failover: fixed rollback in net_failover_open()

[Sasha Levin]

From: Vasily Averin <vvs@virtuozzo.com>

[ Upstream commit e8224bfe77293494626f6eec1884fee7b87d0ced ]

found by smatch:
drivers/net/net_failover.c:65 net_failover_open() error:
 we previously assumed 'primary_dev' could be null (see line 43)

Fixes: cfc80d9a1163 ("net: Introduce net_failover driver")
Signed-off-by: Vasily Averin <vvs@virtuozzo.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/net_failover.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/drivers/net/net_failover.c b/drivers/net/net_failover.c
index beeb7eb76ca3..57273188b71e 100644
--- a/drivers/net/net_failover.c
+++ b/drivers/net/net_failover.c
@@ -62,7 +62,8 @@ static int net_failover_open(struct net_device *dev)
 	return 0;
 
 err_standby_open:
-	dev_close(primary_dev);
+	if (primary_dev)
+		dev_close(primary_dev);
 err_primary_open:
 	netif_tx_disable(dev);
 	return err;
-- 
2.25.1

[PATCH AUTOSEL 4.19 106/106] string.h: fix incompatibility between FORTIFY_SOURCE and KASAN

[Sasha Levin]

From: Daniel Axtens <dja@axtens.net>

[ Upstream commit 47227d27e2fcb01a9e8f5958d8997cf47a820afc ]

The memcmp KASAN self-test fails on a kernel with both KASAN and
FORTIFY_SOURCE.

When FORTIFY_SOURCE is on, a number of functions are replaced with
fortified versions, which attempt to check the sizes of the operands.
However, these functions often directly invoke __builtin_foo() once they
have performed the fortify check.  Using __builtins may bypass KASAN
checks if the compiler decides to inline it's own implementation as
sequence of instructions, rather than emit a function call that goes out
to a KASAN-instrumented implementation.

Why is only memcmp affected?
============================

Of the string and string-like functions that kasan_test tests, only memcmp
is replaced by an inline sequence of instructions in my testing on x86
with gcc version 9.2.1 20191008 (Ubuntu 9.2.1-9ubuntu2).

I believe this is due to compiler heuristics.  For example, if I annotate
kmalloc calls with the alloc_size annotation (and disable some fortify
compile-time checking!), the compiler will replace every memset except the
one in kmalloc_uaf_memset with inline instructions.  (I have some WIP
patches to add this annotation.)

Does this affect other functions in string.h?
=============================================

Yes. Anything that uses __builtin_* rather than __real_* could be
affected. This looks like:

 - strncpy
 - strcat
 - strlen
 - strlcpy maybe, under some circumstances?
 - strncat under some circumstances
 - memset
 - memcpy
 - memmove
 - memcmp (as noted)
 - memchr
 - strcpy

Whether a function call is emitted always depends on the compiler.  Most
bugs should get caught by FORTIFY_SOURCE, but the missed memcmp test shows
that this is not always the case.

Isn't FORTIFY_SOURCE disabled with KASAN?
========================================-

The string headers on all arches supporting KASAN disable fortify with
kasan, but only when address sanitisation is _also_ disabled.  For example
from x86:

 #if defined(CONFIG_KASAN) && !defined(__SANITIZE_ADDRESS__)
 /*
  * For files that are not instrumented (e.g. mm/slub.c) we
  * should use not instrumented version of mem* functions.
  */
 #define memcpy(dst, src, len) __memcpy(dst, src, len)
 #define memmove(dst, src, len) __memmove(dst, src, len)
 #define memset(s, c, n) __memset(s, c, n)

 #ifndef __NO_FORTIFY
 #define __NO_FORTIFY /* FORTIFY_SOURCE uses __builtin_memcpy, etc. */
 #endif

 #endif

This comes from commit 6974f0c4555e ("include/linux/string.h: add the
option of fortified string.h functions"), and doesn't work when KASAN is
enabled and the file is supposed to be sanitised - as with test_kasan.c

I'm pretty sure this is not wrong, but not as expansive it should be:

 * we shouldn't use __builtin_memcpy etc in files where we don't have
   instrumentation - it could devolve into a function call to memcpy,
   which will be instrumented. Rather, we should use __memcpy which
   by convention is not instrumented.

 * we also shouldn't be using __builtin_memcpy when we have a KASAN
   instrumented file, because it could be replaced with inline asm
   that will not be instrumented.

What is correct behaviour?
==========================

Firstly, there is some overlap between fortification and KASAN: both
provide some level of _runtime_ checking. Only fortify provides
compile-time checking.

KASAN and fortify can pick up different things at runtime:

 - Some fortify functions, notably the string functions, could easily be
   modified to consider sub-object sizes (e.g. members within a struct),
   and I have some WIP patches to do this. KASAN cannot detect these
   because it cannot insert poision between members of a struct.

 - KASAN can detect many over-reads/over-writes when the sizes of both
   operands are unknown, which fortify cannot.

So there are a couple of options:

 1) Flip the test: disable fortify in santised files and enable it in
    unsanitised files. This at least stops us missing KASAN checking, but
    we lose the fortify checking.

 2) Make the fortify code always call out to real versions. Do this only
    for KASAN, for fear of losing the inlining opportunities we get from
    __builtin_*.

(We can't use kasan_check_{read,write}: because the fortify functions are
_extern inline_, you can't include _static_ inline functions without a
compiler warning. kasan_check_{read,write} are static inline so we can't
use them even when they would otherwise be suitable.)

Take approach 2 and call out to real versions when KASAN is enabled.

Use __underlying_foo to distinguish from __real_foo: __real_foo always
refers to the kernel's implementation of foo, __underlying_foo could be
either the kernel implementation or the __builtin_foo implementation.

This is sometimes enough to make the memcmp test succeed with
FORTIFY_SOURCE enabled. It is at least enough to get the function call
into the module. One more fix is needed to make it reliable: see the next
patch.

Fixes: 6974f0c4555e ("include/linux/string.h: add the option of fortified string.h functions")
Signed-off-by: Daniel Axtens <dja@axtens.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Tested-by: David Gow <davidgow@google.com>
Reviewed-by: Dmitry Vyukov <dvyukov@google.com>
Cc: Daniel Micay <danielmicay@gmail.com>
Cc: Andrey Ryabinin <aryabinin@virtuozzo.com>
Cc: Alexander Potapenko <glider@google.com>
Link: http://lkml.kernel.org/r/20200423154503.5103-3-dja@axtens.net
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 include/linux/string.h | 60 +++++++++++++++++++++++++++++++++---------
 1 file changed, 48 insertions(+), 12 deletions(-)

diff --git a/include/linux/string.h b/include/linux/string.h
index f58e1ef76572..4db285b83f44 100644
--- a/include/linux/string.h
+++ b/include/linux/string.h
@@ -239,6 +239,31 @@ void __read_overflow3(void) __compiletime_error("detected read beyond size of ob
 void __write_overflow(void) __compiletime_error("detected write beyond size of object passed as 1st parameter");
 
 #if !defined(__NO_FORTIFY) && defined(__OPTIMIZE__) && defined(CONFIG_FORTIFY_SOURCE)
+
+#ifdef CONFIG_KASAN
+extern void *__underlying_memchr(const void *p, int c, __kernel_size_t size) __RENAME(memchr);
+extern int __underlying_memcmp(const void *p, const void *q, __kernel_size_t size) __RENAME(memcmp);
+extern void *__underlying_memcpy(void *p, const void *q, __kernel_size_t size) __RENAME(memcpy);
+extern void *__underlying_memmove(void *p, const void *q, __kernel_size_t size) __RENAME(memmove);
+extern void *__underlying_memset(void *p, int c, __kernel_size_t size) __RENAME(memset);
+extern char *__underlying_strcat(char *p, const char *q) __RENAME(strcat);
+extern char *__underlying_strcpy(char *p, const char *q) __RENAME(strcpy);
+extern __kernel_size_t __underlying_strlen(const char *p) __RENAME(strlen);
+extern char *__underlying_strncat(char *p, const char *q, __kernel_size_t count) __RENAME(strncat);
+extern char *__underlying_strncpy(char *p, const char *q, __kernel_size_t size) __RENAME(strncpy);
+#else
+#define __underlying_memchr	__builtin_memchr
+#define __underlying_memcmp	__builtin_memcmp
+#define __underlying_memcpy	__builtin_memcpy
+#define __underlying_memmove	__builtin_memmove
+#define __underlying_memset	__builtin_memset
+#define __underlying_strcat	__builtin_strcat
+#define __underlying_strcpy	__builtin_strcpy
+#define __underlying_strlen	__builtin_strlen
+#define __underlying_strncat	__builtin_strncat
+#define __underlying_strncpy	__builtin_strncpy
+#endif
+
 __FORTIFY_INLINE char *strncpy(char *p, const char *q, __kernel_size_t size)
 {
 	size_t p_size = __builtin_object_size(p, 0);
@@ -246,14 +271,14 @@ __FORTIFY_INLINE char *strncpy(char *p, const char *q, __kernel_size_t size)
 		__write_overflow();
 	if (p_size < size)
 		fortify_panic(__func__);
-	return __builtin_strncpy(p, q, size);
+	return __underlying_strncpy(p, q, size);
 }
 
 __FORTIFY_INLINE char *strcat(char *p, const char *q)
 {
 	size_t p_size = __builtin_object_size(p, 0);
 	if (p_size == (size_t)-1)
-		return __builtin_strcat(p, q);
+		return __underlying_strcat(p, q);
 	if (strlcat(p, q, p_size) >= p_size)
 		fortify_panic(__func__);
 	return p;
@@ -267,7 +292,7 @@ __FORTIFY_INLINE __kernel_size_t strlen(const char *p)
 	/* Work around gcc excess stack consumption issue */
 	if (p_size == (size_t)-1 ||
 	    (__builtin_constant_p(p[p_size - 1]) && p[p_size - 1] == '\0'))
-		return __builtin_strlen(p);
+		return __underlying_strlen(p);
 	ret = strnlen(p, p_size);
 	if (p_size <= ret)
 		fortify_panic(__func__);
@@ -300,7 +325,7 @@ __FORTIFY_INLINE size_t strlcpy(char *p, const char *q, size_t size)
 			__write_overflow();
 		if (len >= p_size)
 			fortify_panic(__func__);
-		__builtin_memcpy(p, q, len);
+		__underlying_memcpy(p, q, len);
 		p[len] = '\0';
 	}
 	return ret;
@@ -313,12 +338,12 @@ __FORTIFY_INLINE char *strncat(char *p, const char *q, __kernel_size_t count)
 	size_t p_size = __builtin_object_size(p, 0);
 	size_t q_size = __builtin_object_size(q, 0);
 	if (p_size == (size_t)-1 && q_size == (size_t)-1)
-		return __builtin_strncat(p, q, count);
+		return __underlying_strncat(p, q, count);
 	p_len = strlen(p);
 	copy_len = strnlen(q, count);
 	if (p_size < p_len + copy_len + 1)
 		fortify_panic(__func__);
-	__builtin_memcpy(p + p_len, q, copy_len);
+	__underlying_memcpy(p + p_len, q, copy_len);
 	p[p_len + copy_len] = '\0';
 	return p;
 }
@@ -330,7 +355,7 @@ __FORTIFY_INLINE void *memset(void *p, int c, __kernel_size_t size)
 		__write_overflow();
 	if (p_size < size)
 		fortify_panic(__func__);
-	return __builtin_memset(p, c, size);
+	return __underlying_memset(p, c, size);
 }
 
 __FORTIFY_INLINE void *memcpy(void *p, const void *q, __kernel_size_t size)
@@ -345,7 +370,7 @@ __FORTIFY_INLINE void *memcpy(void *p, const void *q, __kernel_size_t size)
 	}
 	if (p_size < size || q_size < size)
 		fortify_panic(__func__);
-	return __builtin_memcpy(p, q, size);
+	return __underlying_memcpy(p, q, size);
 }
 
 __FORTIFY_INLINE void *memmove(void *p, const void *q, __kernel_size_t size)
@@ -360,7 +385,7 @@ __FORTIFY_INLINE void *memmove(void *p, const void *q, __kernel_size_t size)
 	}
 	if (p_size < size || q_size < size)
 		fortify_panic(__func__);
-	return __builtin_memmove(p, q, size);
+	return __underlying_memmove(p, q, size);
 }
 
 extern void *__real_memscan(void *, int, __kernel_size_t) __RENAME(memscan);
@@ -386,7 +411,7 @@ __FORTIFY_INLINE int memcmp(const void *p, const void *q, __kernel_size_t size)
 	}
 	if (p_size < size || q_size < size)
 		fortify_panic(__func__);
-	return __builtin_memcmp(p, q, size);
+	return __underlying_memcmp(p, q, size);
 }
 
 __FORTIFY_INLINE void *memchr(const void *p, int c, __kernel_size_t size)
@@ -396,7 +421,7 @@ __FORTIFY_INLINE void *memchr(const void *p, int c, __kernel_size_t size)
 		__read_overflow();
 	if (p_size < size)
 		fortify_panic(__func__);
-	return __builtin_memchr(p, c, size);
+	return __underlying_memchr(p, c, size);
 }
 
 void *__real_memchr_inv(const void *s, int c, size_t n) __RENAME(memchr_inv);
@@ -427,11 +452,22 @@ __FORTIFY_INLINE char *strcpy(char *p, const char *q)
 	size_t p_size = __builtin_object_size(p, 0);
 	size_t q_size = __builtin_object_size(q, 0);
 	if (p_size == (size_t)-1 && q_size == (size_t)-1)
-		return __builtin_strcpy(p, q);
+		return __underlying_strcpy(p, q);
 	memcpy(p, q, strlen(q) + 1);
 	return p;
 }
 
+/* Don't use these outside the FORITFY_SOURCE implementation */
+#undef __underlying_memchr
+#undef __underlying_memcmp
+#undef __underlying_memcpy
+#undef __underlying_memmove
+#undef __underlying_memset
+#undef __underlying_strcat
+#undef __underlying_strcpy
+#undef __underlying_strlen
+#undef __underlying_strncat
+#undef __underlying_strncpy
 #endif
 
 /**
-- 
2.25.1

Re: [PATCH AUTOSEL 4.19 080/106] mips: Add udelay lpj numbers adjustment

[Aurelien Jarno]

On 2020-06-08 19:22, Sasha Levin wrote:
> From: Serge Semin <Sergey.Semin@baikalelectronics.ru>
> 
> [ Upstream commit ed26aacfb5f71eecb20a51c4467da440cb719d66 ]
> 
> Loops-per-jiffies is a special number which represents a number of
> noop-loop cycles per CPU-scheduler quantum - jiffies. As you
> understand aside from CPU-specific implementation it depends on
> the CPU frequency. So when a platform has the CPU frequency fixed,
> we have no problem and the current udelay interface will work
> just fine. But as soon as CPU-freq driver is enabled and the cores
> frequency changes, we'll end up with distorted udelay's. In order
> to fix this we have to accordinly adjust the per-CPU udelay_val
> (the same as the global loops_per_jiffy) number. This can be done
> in the CPU-freq transition event handler. We subscribe to that event
> in the MIPS arch time-inititalization method.
> 
> Co-developed-by: Alexey Malahov <Alexey.Malahov@baikalelectronics.ru>
> Signed-off-by: Alexey Malahov <Alexey.Malahov@baikalelectronics.ru>
> Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru>
> Reviewed-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
> Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
> Cc: Paul Burton <paulburton@kernel.org>
> Cc: Ralf Baechle <ralf@linux-mips.org>
> Cc: Arnd Bergmann <arnd@arndb.de>
> Cc: Rob Herring <robh+dt@kernel.org>
> Cc: devicetree@vger.kernel.org
> Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
> Signed-off-by: Sasha Levin <sashal@kernel.org>
> ---
>  arch/mips/kernel/time.c | 70 +++++++++++++++++++++++++++++++++++++++++
>  1 file changed, 70 insertions(+)
> 
> diff --git a/arch/mips/kernel/time.c b/arch/mips/kernel/time.c
> index bfe02ded25d1..1e631a484ddf 100644
> --- a/arch/mips/kernel/time.c
> +++ b/arch/mips/kernel/time.c
> @@ -22,12 +22,82 @@
>  #include <linux/smp.h>
>  #include <linux/spinlock.h>
>  #include <linux/export.h>
> +#include <linux/cpufreq.h>
> +#include <linux/delay.h>
>  
>  #include <asm/cpu-features.h>
>  #include <asm/cpu-type.h>
>  #include <asm/div64.h>
>  #include <asm/time.h>
>  
> +#ifdef CONFIG_CPU_FREQ
> +
> +static DEFINE_PER_CPU(unsigned long, pcp_lpj_ref);
> +static DEFINE_PER_CPU(unsigned long, pcp_lpj_ref_freq);
> +static unsigned long glb_lpj_ref;
> +static unsigned long glb_lpj_ref_freq;
> +
> +static int cpufreq_callback(struct notifier_block *nb,
> +			    unsigned long val, void *data)
> +{
> +	struct cpufreq_freqs *freq = data;
> +	struct cpumask *cpus = freq->policy->cpus;
                                     ^^^^^^

The policy member has been added in kernel 5.2, so kernel 4.19.129 and
later do not build anymore when CONFIG_CPU_FREQ=y.

-- 
Aurelien Jarno                          GPG: 4096R/1DDD8C9B
aurelien@aurel32.net                 http://www.aurel32.net