All of lore.kernel.org
 help / color / mirror / Atom feed
From: Roman Bolshakov <r.bolshakov@yadro.com>
To: <qemu-devel@nongnu.org>
Cc: "Daniel P. Berrangé" <berrange@redhat.com>,
	"Li Zhijian" <lizhijian@cn.fujitsu.com>,
	"Jason Wang" <jasowang@redhat.com>,
	"Cameron Esfahani" <dirty@apple.com>,
	"Zhang Chen" <chen.zhang@intel.com>,
	"Roman Bolshakov" <r.bolshakov@yadro.com>,
	"Philippe Mathieu-Daudé" <philmd@redhat.com>
Subject: [PATCH 4/4] net/colo: Match is-enabled probe to tracepoint
Date: Thu, 16 Jul 2020 11:17:54 +0300	[thread overview]
Message-ID: <20200716081754.22422-5-r.bolshakov@yadro.com> (raw)
In-Reply-To: <20200716081754.22422-1-r.bolshakov@yadro.com>

Build of QEMU with dtrace fails on macOS:

  LINK    x86_64-softmmu/qemu-system-x86_64
error: probe colo_compare_miscompare doesn't exist
error: Could not register probes
ld: error creating dtrace DOF section for architecture x86_64

The reason of the error is explained by Adam Leventhal [1]:

  Note that is-enabled probes don't have the stability magic so I'm not
  sure how things would work if only is-enabled probes were used.

net/colo code uses is-enabled probes to determine if other probes should
be used but colo_compare_miscompare itself is not used explicitly.
Linker doesn't include the symbol and build fails.

The issue can be resolved if is-enabled probe matches the actual trace
point that is used inside the test.

1. http://markmail.org/message/6grq2ygr5nwdwsnb

Fixes: f4b618360e ("colo-compare: add TCP, UDP, ICMP packet comparison")
Cc: Philippe Mathieu-Daudé <philmd@redhat.com>
Cc: Cameron Esfahani <dirty@apple.com>
Signed-off-by: Roman Bolshakov <r.bolshakov@yadro.com>
---
 net/colo-compare.c    | 12 +++++++-----
 net/filter-rewriter.c |  8 ++++++--
 net/trace-events      |  2 --
 3 files changed, 13 insertions(+), 9 deletions(-)

diff --git a/net/colo-compare.c b/net/colo-compare.c
index 398b7546ff..9525ed703b 100644
--- a/net/colo-compare.c
+++ b/net/colo-compare.c
@@ -327,7 +327,7 @@ static int colo_compare_packet_payload(Packet *ppkt,
                                        uint16_t len)
 
 {
-    if (trace_event_get_state_backends(TRACE_COLO_COMPARE_MISCOMPARE)) {
+    if (trace_event_get_state_backends(TRACE_COLO_COMPARE_IP_INFO)) {
         char pri_ip_src[20], pri_ip_dst[20], sec_ip_src[20], sec_ip_dst[20];
 
         strcpy(pri_ip_src, inet_ntoa(ppkt->ip->ip_src));
@@ -492,7 +492,7 @@ sec:
         g_queue_push_head(&conn->primary_list, ppkt);
         g_queue_push_head(&conn->secondary_list, spkt);
 
-        if (trace_event_get_state_backends(TRACE_COLO_COMPARE_MISCOMPARE)) {
+        if (trace_event_get_state_backends(TRACE_COLO_COMPARE_TCP_INFO)) {
             qemu_hexdump((char *)ppkt->data, stderr,
                         "colo-compare ppkt", ppkt->size);
             qemu_hexdump((char *)spkt->data, stderr,
@@ -533,7 +533,8 @@ static int colo_packet_compare_udp(Packet *spkt, Packet *ppkt)
                                     ppkt->size - offset)) {
         trace_colo_compare_udp_miscompare("primary pkt size", ppkt->size);
         trace_colo_compare_udp_miscompare("Secondary pkt size", spkt->size);
-        if (trace_event_get_state_backends(TRACE_COLO_COMPARE_MISCOMPARE)) {
+        if (trace_event_get_state_backends(
+              TRACE_COLO_COMPARE_UDP_MISCOMPARE)) {
             qemu_hexdump((char *)ppkt->data, stderr, "colo-compare pri pkt",
                          ppkt->size);
             qemu_hexdump((char *)spkt->data, stderr, "colo-compare sec pkt",
@@ -576,7 +577,8 @@ static int colo_packet_compare_icmp(Packet *spkt, Packet *ppkt)
                                            ppkt->size);
         trace_colo_compare_icmp_miscompare("Secondary pkt size",
                                            spkt->size);
-        if (trace_event_get_state_backends(TRACE_COLO_COMPARE_MISCOMPARE)) {
+        if (trace_event_get_state_backends(
+              TRACE_COLO_COMPARE_ICMP_MISCOMPARE)) {
             qemu_hexdump((char *)ppkt->data, stderr, "colo-compare pri pkt",
                          ppkt->size);
             qemu_hexdump((char *)spkt->data, stderr, "colo-compare sec pkt",
@@ -597,7 +599,7 @@ static int colo_packet_compare_other(Packet *spkt, Packet *ppkt)
     uint16_t offset = ppkt->vnet_hdr_len;
 
     trace_colo_compare_main("compare other");
-    if (trace_event_get_state_backends(TRACE_COLO_COMPARE_MISCOMPARE)) {
+    if (trace_event_get_state_backends(TRACE_COLO_COMPARE_IP_INFO)) {
         char pri_ip_src[20], pri_ip_dst[20], sec_ip_src[20], sec_ip_dst[20];
 
         strcpy(pri_ip_src, inet_ntoa(ppkt->ip->ip_src));
diff --git a/net/filter-rewriter.c b/net/filter-rewriter.c
index 1aaad101b6..ff04165cc4 100644
--- a/net/filter-rewriter.c
+++ b/net/filter-rewriter.c
@@ -76,7 +76,9 @@ static int handle_primary_tcp_pkt(RewriterState *rf,
     struct tcp_hdr *tcp_pkt;
 
     tcp_pkt = (struct tcp_hdr *)pkt->transport_header;
-    if (trace_event_get_state_backends(TRACE_COLO_FILTER_REWRITER_DEBUG)) {
+    if (trace_event_get_state_backends(TRACE_COLO_FILTER_REWRITER_PKT_INFO) ||
+        trace_event_get_state_backends(
+          TRACE_COLO_FILTER_REWRITER_CONN_OFFSET)) {
         trace_colo_filter_rewriter_pkt_info(__func__,
                     inet_ntoa(pkt->ip->ip_src), inet_ntoa(pkt->ip->ip_dst),
                     ntohl(tcp_pkt->th_seq), ntohl(tcp_pkt->th_ack),
@@ -180,7 +182,9 @@ static int handle_secondary_tcp_pkt(RewriterState *rf,
 
     tcp_pkt = (struct tcp_hdr *)pkt->transport_header;
 
-    if (trace_event_get_state_backends(TRACE_COLO_FILTER_REWRITER_DEBUG)) {
+    if (trace_event_get_state_backends(TRACE_COLO_FILTER_REWRITER_PKT_INFO) ||
+        trace_event_get_state_backends(
+          TRACE_COLO_FILTER_REWRITER_CONN_OFFSET)) {
         trace_colo_filter_rewriter_pkt_info(__func__,
                     inet_ntoa(pkt->ip->ip_src), inet_ntoa(pkt->ip->ip_dst),
                     ntohl(tcp_pkt->th_seq), ntohl(tcp_pkt->th_ack),
diff --git a/net/trace-events b/net/trace-events
index fa49c71533..bfaff7891d 100644
--- a/net/trace-events
+++ b/net/trace-events
@@ -17,10 +17,8 @@ colo_compare_udp_miscompare(const char *sta, int size) ": %s = %d"
 colo_compare_icmp_miscompare(const char *sta, int size) ": %s = %d"
 colo_compare_ip_info(int psize, const char *sta, const char *stb, int ssize, const char *stc, const char *std) "ppkt size = %d, ip_src = %s, ip_dst = %s, spkt size = %d, ip_src = %s, ip_dst = %s"
 colo_old_packet_check_found(int64_t old_time) "%" PRId64
-colo_compare_miscompare(void) ""
 colo_compare_tcp_info(const char *pkt, uint32_t seq, uint32_t ack, int hdlen, int pdlen, int offset, int flags) "%s: seq/ack= %u/%u hdlen= %d pdlen= %d offset= %d flags=%d"
 
 # filter-rewriter.c
-colo_filter_rewriter_debug(void) ""
 colo_filter_rewriter_pkt_info(const char *func, const char *src, const char *dst, uint32_t seq, uint32_t ack, uint32_t flag) "%s: src/dst: %s/%s p: seq/ack=%u/%u  flags=0x%x"
 colo_filter_rewriter_conn_offset(uint32_t offset) ": offset=%u"
-- 
2.26.1



  parent reply	other threads:[~2020-07-16  8:20 UTC|newest]

Thread overview: 11+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-07-16  8:17 [PATCH 0/4] Add dtrace support on macOS Roman Bolshakov
2020-07-16  8:17 ` [PATCH 1/4] scripts/tracetool: Fix dtrace generation for macOS Roman Bolshakov
2020-07-16  8:56   ` Daniel P. Berrangé
2020-07-16  8:17 ` [PATCH 2/4] scripts/tracetool: Use void pointer for vcpu Roman Bolshakov
2020-07-16  8:57   ` Daniel P. Berrangé
2020-07-16  8:17 ` [PATCH 3/4] build: Don't make object files for dtrace on macOS Roman Bolshakov
2020-07-16  8:54   ` Daniel P. Berrangé
2020-07-16  8:17 ` Roman Bolshakov [this message]
2020-07-16  8:51   ` [PATCH 4/4] net/colo: Match is-enabled probe to tracepoint Daniel P. Berrangé
2020-07-16 10:55     ` Roman Bolshakov
2020-07-16  8:55 ` [PATCH 0/4] Add dtrace support on macOS Daniel P. Berrangé

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20200716081754.22422-5-r.bolshakov@yadro.com \
    --to=r.bolshakov@yadro.com \
    --cc=berrange@redhat.com \
    --cc=chen.zhang@intel.com \
    --cc=dirty@apple.com \
    --cc=jasowang@redhat.com \
    --cc=lizhijian@cn.fujitsu.com \
    --cc=philmd@redhat.com \
    --cc=qemu-devel@nongnu.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.