[PATCH 0/3] Add modem debug features

[PATCH 0/3] Add modem debug features

[Sibi Sankar]

The series adds support for the following modem debug features:
 * Modem debug policy which enables coredumps/live debug on secure devices
 * MBA text logs extraction on SC7180 SoCs

Sibi Sankar (3):
  remoteproc: qcom_q6v5_mss: Add modem debug policy support
  remoteproc: qcom_q6v5_mss: Add MBA log extraction support
  remoteproc: qcom_q6v5_mss: Update MBA log info

 drivers/remoteproc/qcom_q6v5_mss.c | 59 +++++++++++++++++++++++++++---
 1 file changed, 53 insertions(+), 6 deletions(-)

-- 
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
a Linux Foundation Collaborative Project

[PATCH 1/3] remoteproc: qcom_q6v5_mss: Add modem debug policy support

[Sibi Sankar]

Add modem debug policy support which will enable coredumps and live
debug support when the msadp firmware is present on secure devices.

Signed-off-by: Sibi Sankar <sibis@codeaurora.org>
---
 drivers/remoteproc/qcom_q6v5_mss.c | 15 ++++++++++++++-
 1 file changed, 14 insertions(+), 1 deletion(-)

diff --git a/drivers/remoteproc/qcom_q6v5_mss.c b/drivers/remoteproc/qcom_q6v5_mss.c
index 13c6d5a72a831..95e21ed607cb9 100644
--- a/drivers/remoteproc/qcom_q6v5_mss.c
+++ b/drivers/remoteproc/qcom_q6v5_mss.c
@@ -187,6 +187,7 @@ struct q6v5 {
 	phys_addr_t mba_phys;
 	void *mba_region;
 	size_t mba_size;
+	size_t dp_size;
 
 	phys_addr_t mpss_phys;
 	phys_addr_t mpss_reloc;
@@ -406,6 +407,13 @@ static int q6v5_xfer_mem_ownership(struct q6v5 *qproc, int *current_perm,
 static int q6v5_load(struct rproc *rproc, const struct firmware *fw)
 {
 	struct q6v5 *qproc = rproc->priv;
+	const struct firmware *dp_fw;
+
+	if (!request_firmware(&dp_fw, "msadp", qproc->dev) && fw->size <= SZ_1M) {
+		memcpy(qproc->mba_region + SZ_1M, dp_fw->data, dp_fw->size);
+		qproc->dp_size = dp_fw->size;
+		release_firmware(dp_fw);
+	}
 
 	memcpy(qproc->mba_region, fw->data, fw->size);
 
@@ -896,6 +904,10 @@ static int q6v5_mba_load(struct q6v5 *qproc)
 	}
 
 	writel(qproc->mba_phys, qproc->rmb_base + RMB_MBA_IMAGE_REG);
+	if (qproc->dp_size) {
+		writel(qproc->mba_phys + SZ_1M, qproc->rmb_base + RMB_PMI_CODE_START_REG);
+		writel(qproc->dp_size, qproc->rmb_base + RMB_PMI_CODE_LENGTH_REG);
+	}
 
 	ret = q6v5proc_reset(qproc);
 	if (ret)
@@ -1258,7 +1270,8 @@ static int q6v5_start(struct rproc *rproc)
 	if (ret)
 		return ret;
 
-	dev_info(qproc->dev, "MBA booted, loading mpss\n");
+	dev_info(qproc->dev, "MBA booted, debug policy %s, loading mpss\n",
+		 qproc->dp_size ? "enabled" : "disabled");
 
 	ret = q6v5_mpss_load(qproc);
 	if (ret)
-- 
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
a Linux Foundation Collaborative Project

Re: [PATCH 1/3] remoteproc: qcom_q6v5_mss: Add modem debug policy support

[Bjorn Andersson]

On Thu 16 Jul 05:36 PDT 2020, Sibi Sankar wrote:

> Add modem debug policy support which will enable coredumps and live
> debug support when the msadp firmware is present on secure devices.
> 
> Signed-off-by: Sibi Sankar <sibis@codeaurora.org>
> ---
>  drivers/remoteproc/qcom_q6v5_mss.c | 15 ++++++++++++++-
>  1 file changed, 14 insertions(+), 1 deletion(-)
> 
> diff --git a/drivers/remoteproc/qcom_q6v5_mss.c b/drivers/remoteproc/qcom_q6v5_mss.c
> index 13c6d5a72a831..95e21ed607cb9 100644
> --- a/drivers/remoteproc/qcom_q6v5_mss.c
> +++ b/drivers/remoteproc/qcom_q6v5_mss.c
> @@ -187,6 +187,7 @@ struct q6v5 {
>  	phys_addr_t mba_phys;
>  	void *mba_region;
>  	size_t mba_size;
> +	size_t dp_size;
>  
>  	phys_addr_t mpss_phys;
>  	phys_addr_t mpss_reloc;
> @@ -406,6 +407,13 @@ static int q6v5_xfer_mem_ownership(struct q6v5 *qproc, int *current_perm,
>  static int q6v5_load(struct rproc *rproc, const struct firmware *fw)
>  {
>  	struct q6v5 *qproc = rproc->priv;
> +	const struct firmware *dp_fw;
> +
> +	if (!request_firmware(&dp_fw, "msadp", qproc->dev) && fw->size <= SZ_1M) {

Can we change this to a request_firmware_direct() to avoid the fact that
as written here devices lacking this file will pause here for 60 seconds
waiting for userspace to assist in loading it (which at least none of my
systems do).

I also think that while it's nice to check that fw->size <= SZ_1M, to
avoid overwriting the tail of it, you should check that SZ_1M +
dp_fw->size < mba_size. To ensure that the memcpy doesn't go out of
bounds.

> +		memcpy(qproc->mba_region + SZ_1M, dp_fw->data, dp_fw->size);
> +		qproc->dp_size = dp_fw->size;
> +		release_firmware(dp_fw);
> +	}
>  
>  	memcpy(qproc->mba_region, fw->data, fw->size);
>  
> @@ -896,6 +904,10 @@ static int q6v5_mba_load(struct q6v5 *qproc)
>  	}
>  
>  	writel(qproc->mba_phys, qproc->rmb_base + RMB_MBA_IMAGE_REG);
> +	if (qproc->dp_size) {
> +		writel(qproc->mba_phys + SZ_1M, qproc->rmb_base + RMB_PMI_CODE_START_REG);
> +		writel(qproc->dp_size, qproc->rmb_base + RMB_PMI_CODE_LENGTH_REG);
> +	}
>  
>  	ret = q6v5proc_reset(qproc);
>  	if (ret)
> @@ -1258,7 +1270,8 @@ static int q6v5_start(struct rproc *rproc)
>  	if (ret)
>  		return ret;
>  
> -	dev_info(qproc->dev, "MBA booted, loading mpss\n");
> +	dev_info(qproc->dev, "MBA booted, debug policy %s, loading mpss\n",
> +		 qproc->dp_size ? "enabled" : "disabled");

"MBA booted with%s debug policy, loading mpss\n", qproc->dp_size ? "" : "out"

Please.

Regards,
Bjorn

>  
>  	ret = q6v5_mpss_load(qproc);
>  	if (ret)
> -- 
> The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
> a Linux Foundation Collaborative Project
> 

Re: [PATCH 1/3] remoteproc: qcom_q6v5_mss: Add modem debug policy support

[Sibi Sankar]

Hey Bjorn,
Thanks for taking time to review
the series.

On 2020-07-17 10:11, Bjorn Andersson wrote:
> On Thu 16 Jul 05:36 PDT 2020, Sibi Sankar wrote:
> 
>> Add modem debug policy support which will enable coredumps and live
>> debug support when the msadp firmware is present on secure devices.
>> 
>> Signed-off-by: Sibi Sankar <sibis@codeaurora.org>
>> ---
>>  drivers/remoteproc/qcom_q6v5_mss.c | 15 ++++++++++++++-
>>  1 file changed, 14 insertions(+), 1 deletion(-)
>> 
>> diff --git a/drivers/remoteproc/qcom_q6v5_mss.c 
>> b/drivers/remoteproc/qcom_q6v5_mss.c
>> index 13c6d5a72a831..95e21ed607cb9 100644
>> --- a/drivers/remoteproc/qcom_q6v5_mss.c
>> +++ b/drivers/remoteproc/qcom_q6v5_mss.c
>> @@ -187,6 +187,7 @@ struct q6v5 {
>>  	phys_addr_t mba_phys;
>>  	void *mba_region;
>>  	size_t mba_size;
>> +	size_t dp_size;
>> 
>>  	phys_addr_t mpss_phys;
>>  	phys_addr_t mpss_reloc;
>> @@ -406,6 +407,13 @@ static int q6v5_xfer_mem_ownership(struct q6v5 
>> *qproc, int *current_perm,
>>  static int q6v5_load(struct rproc *rproc, const struct firmware *fw)
>>  {
>>  	struct q6v5 *qproc = rproc->priv;
>> +	const struct firmware *dp_fw;
>> +
>> +	if (!request_firmware(&dp_fw, "msadp", qproc->dev) && fw->size <= 
>> SZ_1M) {
> 
> Can we change this to a request_firmware_direct() to avoid the fact 
> that
> as written here devices lacking this file will pause here for 60 
> seconds
> waiting for userspace to assist in loading it (which at least none of 
> my
> systems do).
> 
> I also think that while it's nice to check that fw->size <= SZ_1M, to
> avoid overwriting the tail of it, you should check that SZ_1M +
> dp_fw->size < mba_size. To ensure that the memcpy doesn't go out of
> bounds.

Sure I'll get ^^ done in the
next re-spin.

> 
>> +		memcpy(qproc->mba_region + SZ_1M, dp_fw->data, dp_fw->size);
>> +		qproc->dp_size = dp_fw->size;
>> +		release_firmware(dp_fw);
>> +	}
>> 
>>  	memcpy(qproc->mba_region, fw->data, fw->size);
>> 
>> @@ -896,6 +904,10 @@ static int q6v5_mba_load(struct q6v5 *qproc)
>>  	}
>> 
>>  	writel(qproc->mba_phys, qproc->rmb_base + RMB_MBA_IMAGE_REG);
>> +	if (qproc->dp_size) {
>> +		writel(qproc->mba_phys + SZ_1M, qproc->rmb_base + 
>> RMB_PMI_CODE_START_REG);
>> +		writel(qproc->dp_size, qproc->rmb_base + RMB_PMI_CODE_LENGTH_REG);
>> +	}
>> 
>>  	ret = q6v5proc_reset(qproc);
>>  	if (ret)
>> @@ -1258,7 +1270,8 @@ static int q6v5_start(struct rproc *rproc)
>>  	if (ret)
>>  		return ret;
>> 
>> -	dev_info(qproc->dev, "MBA booted, loading mpss\n");
>> +	dev_info(qproc->dev, "MBA booted, debug policy %s, loading mpss\n",
>> +		 qproc->dp_size ? "enabled" : "disabled");
> 
> "MBA booted with%s debug policy, loading mpss\n", qproc->dp_size ? "" : 
> "out"
> 
> Please.

Sure I'll use your template instead.

> 
> Regards,
> Bjorn
> 
>> 
>>  	ret = q6v5_mpss_load(qproc);
>>  	if (ret)
>> --
>> The Qualcomm Innovation Center, Inc. is a member of the Code Aurora 
>> Forum,
>> a Linux Foundation Collaborative Project
>> 

-- 
Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum,
a Linux Foundation Collaborative Project.

[PATCH 2/3] remoteproc: qcom_q6v5_mss: Add MBA log extraction support

[Sibi Sankar]

On SC7180 the MBA firmware stores the bootup text logs in a 4K segment
at the beginning of the MBA region. Add support to extract the logs
which will be useful to debug mba boot/authentication issues.

Signed-off-by: Sibi Sankar <sibis@codeaurora.org>
---
 drivers/remoteproc/qcom_q6v5_mss.c | 41 ++++++++++++++++++++++++++----
 1 file changed, 36 insertions(+), 5 deletions(-)

diff --git a/drivers/remoteproc/qcom_q6v5_mss.c b/drivers/remoteproc/qcom_q6v5_mss.c
index 95e21ed607cb9..4ddf084b2c6fc 100644
--- a/drivers/remoteproc/qcom_q6v5_mss.c
+++ b/drivers/remoteproc/qcom_q6v5_mss.c
@@ -9,6 +9,7 @@
 
 #include <linux/clk.h>
 #include <linux/delay.h>
+#include <linux/devcoredump.h>
 #include <linux/dma-mapping.h>
 #include <linux/interrupt.h>
 #include <linux/kernel.h>
@@ -37,6 +38,8 @@
 
 #define MPSS_CRASH_REASON_SMEM		421
 
+#define MBA_LOG_SIZE			SZ_4K
+
 /* RMB Status Register Values */
 #define RMB_PBL_SUCCESS			0x1
 
@@ -139,6 +142,7 @@ struct rproc_hexagon_res {
 	int version;
 	bool need_mem_protection;
 	bool has_alt_reset;
+	bool has_mba_logs;
 	bool has_spare_reg;
 };
 
@@ -200,6 +204,7 @@ struct q6v5 {
 	struct qcom_sysmon *sysmon;
 	bool need_mem_protection;
 	bool has_alt_reset;
+	bool has_mba_logs;
 	bool has_spare_reg;
 	int mpss_perm;
 	int mba_perm;
@@ -518,6 +523,19 @@ static int q6v5_rmb_mba_wait(struct q6v5 *qproc, u32 status, int ms)
 	return val;
 }
 
+static void q6v5_dump_mba_logs(struct q6v5 *qproc)
+{
+	struct rproc *rproc = qproc->rproc;
+	void *data;
+
+	data = vmalloc(MBA_LOG_SIZE);
+	if (!data)
+		return;
+
+	memcpy(data, qproc->mba_region, MBA_LOG_SIZE);
+	dev_coredumpv(&rproc->dev, data, MBA_LOG_SIZE, GFP_KERNEL);
+}
+
 static int q6v5proc_reset(struct q6v5 *qproc)
 {
 	u32 val;
@@ -838,6 +856,7 @@ static int q6v5_mba_load(struct q6v5 *qproc)
 {
 	int ret;
 	int xfermemop_ret;
+	bool mba_load_err = false;
 
 	qcom_q6v5_prepare(&qproc->q6v5);
 
@@ -931,7 +950,7 @@ static int q6v5_mba_load(struct q6v5 *qproc)
 	q6v5proc_halt_axi_port(qproc, qproc->halt_map, qproc->halt_q6);
 	q6v5proc_halt_axi_port(qproc, qproc->halt_map, qproc->halt_modem);
 	q6v5proc_halt_axi_port(qproc, qproc->halt_map, qproc->halt_nc);
-
+	mba_load_err = true;
 reclaim_mba:
 	xfermemop_ret = q6v5_xfer_mem_ownership(qproc, &qproc->mba_perm, true,
 						false, qproc->mba_phys,
@@ -939,6 +958,8 @@ static int q6v5_mba_load(struct q6v5 *qproc)
 	if (xfermemop_ret) {
 		dev_err(qproc->dev,
 			"Failed to reclaim mba buffer, system may become unstable\n");
+	} else if (qproc->has_mba_logs & mba_load_err) {
+		q6v5_dump_mba_logs(qproc);
 	}
 
 disable_active_clks:
@@ -968,7 +989,7 @@ static int q6v5_mba_load(struct q6v5 *qproc)
 	return ret;
 }
 
-static void q6v5_mba_reclaim(struct q6v5 *qproc)
+static void q6v5_mba_reclaim(struct q6v5 *qproc, bool err_path)
 {
 	int ret;
 	u32 val;
@@ -1006,6 +1027,9 @@ static void q6v5_mba_reclaim(struct q6v5 *qproc)
 				      qproc->mba_size);
 	WARN_ON(ret);
 
+	if (qproc->has_mba_logs && err_path && !ret)
+		q6v5_dump_mba_logs(qproc);
+
 	ret = qcom_q6v5_unprepare(&qproc->q6v5);
 	if (ret) {
 		q6v5_pds_disable(qproc, qproc->proxy_pds,
@@ -1255,7 +1279,7 @@ static void qcom_q6v5_dump_segment(struct rproc *rproc,
 						false, true,
 						qproc->mpss_phys,
 						qproc->mpss_size);
-			q6v5_mba_reclaim(qproc);
+			q6v5_mba_reclaim(qproc, false);
 		}
 	}
 }
@@ -1297,7 +1321,7 @@ static int q6v5_start(struct rproc *rproc)
 	return 0;
 
 reclaim_mpss:
-	q6v5_mba_reclaim(qproc);
+	q6v5_mba_reclaim(qproc, true);
 
 	return ret;
 }
@@ -1313,7 +1337,7 @@ static int q6v5_stop(struct rproc *rproc)
 	if (ret == -ETIMEDOUT)
 		dev_err(qproc->dev, "timed out on wait\n");
 
-	q6v5_mba_reclaim(qproc);
+	q6v5_mba_reclaim(qproc, false);
 
 	return 0;
 }
@@ -1717,6 +1741,7 @@ static int q6v5_probe(struct platform_device *pdev)
 
 	qproc->version = desc->version;
 	qproc->need_mem_protection = desc->need_mem_protection;
+	qproc->has_mba_logs = desc->has_mba_logs;
 
 	ret = qcom_q6v5_init(&qproc->q6v5, pdev, rproc, MPSS_CRASH_REASON_SMEM,
 			     qcom_msa_handover);
@@ -1808,6 +1833,7 @@ static const struct rproc_hexagon_res sc7180_mss = {
 	},
 	.need_mem_protection = true,
 	.has_alt_reset = false,
+	.has_mba_logs = true,
 	.has_spare_reg = true,
 	.version = MSS_SC7180,
 };
@@ -1843,6 +1869,7 @@ static const struct rproc_hexagon_res sdm845_mss = {
 	},
 	.need_mem_protection = true,
 	.has_alt_reset = true,
+	.has_mba_logs = true,
 	.has_spare_reg = false,
 	.version = MSS_SDM845,
 };
@@ -1870,6 +1897,7 @@ static const struct rproc_hexagon_res msm8998_mss = {
 	},
 	.need_mem_protection = true,
 	.has_alt_reset = false,
+	.has_mba_logs = false,
 	.has_spare_reg = false,
 	.version = MSS_MSM8998,
 };
@@ -1900,6 +1928,7 @@ static const struct rproc_hexagon_res msm8996_mss = {
 	},
 	.need_mem_protection = true,
 	.has_alt_reset = false,
+	.has_mba_logs = false,
 	.has_spare_reg = false,
 	.version = MSS_MSM8996,
 };
@@ -1933,6 +1962,7 @@ static const struct rproc_hexagon_res msm8916_mss = {
 	},
 	.need_mem_protection = false,
 	.has_alt_reset = false,
+	.has_mba_logs = false,
 	.has_spare_reg = false,
 	.version = MSS_MSM8916,
 };
@@ -1974,6 +2004,7 @@ static const struct rproc_hexagon_res msm8974_mss = {
 	},
 	.need_mem_protection = false,
 	.has_alt_reset = false,
+	.has_mba_logs = false,
 	.has_spare_reg = false,
 	.version = MSS_MSM8974,
 };
-- 
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
a Linux Foundation Collaborative Project

Re: [PATCH 2/3] remoteproc: qcom_q6v5_mss: Add MBA log extraction support

[Manivannan Sadhasivam]

Hi Sibi,

On Thu, Jul 16, 2020 at 06:06:29PM +0530, Sibi Sankar wrote:
> On SC7180 the MBA firmware stores the bootup text logs in a 4K segment
> at the beginning of the MBA region. Add support to extract the logs
> which will be useful to debug mba boot/authentication issues.
> 
> Signed-off-by: Sibi Sankar <sibis@codeaurora.org>
> ---
>  drivers/remoteproc/qcom_q6v5_mss.c | 41 ++++++++++++++++++++++++++----
>  1 file changed, 36 insertions(+), 5 deletions(-)
> 
> diff --git a/drivers/remoteproc/qcom_q6v5_mss.c b/drivers/remoteproc/qcom_q6v5_mss.c
> index 95e21ed607cb9..4ddf084b2c6fc 100644
> --- a/drivers/remoteproc/qcom_q6v5_mss.c
> +++ b/drivers/remoteproc/qcom_q6v5_mss.c
> @@ -9,6 +9,7 @@
>  
>  #include <linux/clk.h>
>  #include <linux/delay.h>
> +#include <linux/devcoredump.h>
>  #include <linux/dma-mapping.h>
>  #include <linux/interrupt.h>
>  #include <linux/kernel.h>
> @@ -37,6 +38,8 @@
>  
>  #define MPSS_CRASH_REASON_SMEM		421
>  
> +#define MBA_LOG_SIZE			SZ_4K
> +
>  /* RMB Status Register Values */
>  #define RMB_PBL_SUCCESS			0x1
>  
> @@ -139,6 +142,7 @@ struct rproc_hexagon_res {
>  	int version;
>  	bool need_mem_protection;
>  	bool has_alt_reset;
> +	bool has_mba_logs;
>  	bool has_spare_reg;
>  };
>  
> @@ -200,6 +204,7 @@ struct q6v5 {
>  	struct qcom_sysmon *sysmon;
>  	bool need_mem_protection;
>  	bool has_alt_reset;
> +	bool has_mba_logs;
>  	bool has_spare_reg;
>  	int mpss_perm;
>  	int mba_perm;
> @@ -518,6 +523,19 @@ static int q6v5_rmb_mba_wait(struct q6v5 *qproc, u32 status, int ms)
>  	return val;
>  }
>  
> +static void q6v5_dump_mba_logs(struct q6v5 *qproc)
> +{
> +	struct rproc *rproc = qproc->rproc;
> +	void *data;
> +
> +	data = vmalloc(MBA_LOG_SIZE);

Is there any specific reason to use vmalloc for the size of 4K?

Thanks,
Mani

> +	if (!data)
> +		return;
> +
> +	memcpy(data, qproc->mba_region, MBA_LOG_SIZE);
> +	dev_coredumpv(&rproc->dev, data, MBA_LOG_SIZE, GFP_KERNEL);
> +}
> +
>  static int q6v5proc_reset(struct q6v5 *qproc)
>  {
>  	u32 val;
> @@ -838,6 +856,7 @@ static int q6v5_mba_load(struct q6v5 *qproc)
>  {
>  	int ret;
>  	int xfermemop_ret;
> +	bool mba_load_err = false;
>  
>  	qcom_q6v5_prepare(&qproc->q6v5);
>  
> @@ -931,7 +950,7 @@ static int q6v5_mba_load(struct q6v5 *qproc)
>  	q6v5proc_halt_axi_port(qproc, qproc->halt_map, qproc->halt_q6);
>  	q6v5proc_halt_axi_port(qproc, qproc->halt_map, qproc->halt_modem);
>  	q6v5proc_halt_axi_port(qproc, qproc->halt_map, qproc->halt_nc);
> -
> +	mba_load_err = true;
>  reclaim_mba:
>  	xfermemop_ret = q6v5_xfer_mem_ownership(qproc, &qproc->mba_perm, true,
>  						false, qproc->mba_phys,
> @@ -939,6 +958,8 @@ static int q6v5_mba_load(struct q6v5 *qproc)
>  	if (xfermemop_ret) {
>  		dev_err(qproc->dev,
>  			"Failed to reclaim mba buffer, system may become unstable\n");
> +	} else if (qproc->has_mba_logs & mba_load_err) {
> +		q6v5_dump_mba_logs(qproc);
>  	}
>  
>  disable_active_clks:
> @@ -968,7 +989,7 @@ static int q6v5_mba_load(struct q6v5 *qproc)
>  	return ret;
>  }
>  
> -static void q6v5_mba_reclaim(struct q6v5 *qproc)
> +static void q6v5_mba_reclaim(struct q6v5 *qproc, bool err_path)
>  {
>  	int ret;
>  	u32 val;
> @@ -1006,6 +1027,9 @@ static void q6v5_mba_reclaim(struct q6v5 *qproc)
>  				      qproc->mba_size);
>  	WARN_ON(ret);
>  
> +	if (qproc->has_mba_logs && err_path && !ret)
> +		q6v5_dump_mba_logs(qproc);
> +
>  	ret = qcom_q6v5_unprepare(&qproc->q6v5);
>  	if (ret) {
>  		q6v5_pds_disable(qproc, qproc->proxy_pds,
> @@ -1255,7 +1279,7 @@ static void qcom_q6v5_dump_segment(struct rproc *rproc,
>  						false, true,
>  						qproc->mpss_phys,
>  						qproc->mpss_size);
> -			q6v5_mba_reclaim(qproc);
> +			q6v5_mba_reclaim(qproc, false);
>  		}
>  	}
>  }
> @@ -1297,7 +1321,7 @@ static int q6v5_start(struct rproc *rproc)
>  	return 0;
>  
>  reclaim_mpss:
> -	q6v5_mba_reclaim(qproc);
> +	q6v5_mba_reclaim(qproc, true);
>  
>  	return ret;
>  }
> @@ -1313,7 +1337,7 @@ static int q6v5_stop(struct rproc *rproc)
>  	if (ret == -ETIMEDOUT)
>  		dev_err(qproc->dev, "timed out on wait\n");
>  
> -	q6v5_mba_reclaim(qproc);
> +	q6v5_mba_reclaim(qproc, false);
>  
>  	return 0;
>  }
> @@ -1717,6 +1741,7 @@ static int q6v5_probe(struct platform_device *pdev)
>  
>  	qproc->version = desc->version;
>  	qproc->need_mem_protection = desc->need_mem_protection;
> +	qproc->has_mba_logs = desc->has_mba_logs;
>  
>  	ret = qcom_q6v5_init(&qproc->q6v5, pdev, rproc, MPSS_CRASH_REASON_SMEM,
>  			     qcom_msa_handover);
> @@ -1808,6 +1833,7 @@ static const struct rproc_hexagon_res sc7180_mss = {
>  	},
>  	.need_mem_protection = true,
>  	.has_alt_reset = false,
> +	.has_mba_logs = true,
>  	.has_spare_reg = true,
>  	.version = MSS_SC7180,
>  };
> @@ -1843,6 +1869,7 @@ static const struct rproc_hexagon_res sdm845_mss = {
>  	},
>  	.need_mem_protection = true,
>  	.has_alt_reset = true,
> +	.has_mba_logs = true,
>  	.has_spare_reg = false,
>  	.version = MSS_SDM845,
>  };
> @@ -1870,6 +1897,7 @@ static const struct rproc_hexagon_res msm8998_mss = {
>  	},
>  	.need_mem_protection = true,
>  	.has_alt_reset = false,
> +	.has_mba_logs = false,
>  	.has_spare_reg = false,
>  	.version = MSS_MSM8998,
>  };
> @@ -1900,6 +1928,7 @@ static const struct rproc_hexagon_res msm8996_mss = {
>  	},
>  	.need_mem_protection = true,
>  	.has_alt_reset = false,
> +	.has_mba_logs = false,
>  	.has_spare_reg = false,
>  	.version = MSS_MSM8996,
>  };
> @@ -1933,6 +1962,7 @@ static const struct rproc_hexagon_res msm8916_mss = {
>  	},
>  	.need_mem_protection = false,
>  	.has_alt_reset = false,
> +	.has_mba_logs = false,
>  	.has_spare_reg = false,
>  	.version = MSS_MSM8916,
>  };
> @@ -1974,6 +2004,7 @@ static const struct rproc_hexagon_res msm8974_mss = {
>  	},
>  	.need_mem_protection = false,
>  	.has_alt_reset = false,
> +	.has_mba_logs = false,
>  	.has_spare_reg = false,
>  	.version = MSS_MSM8974,
>  };
> -- 
> The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
> a Linux Foundation Collaborative Project
> 

Re: [PATCH 2/3] remoteproc: qcom_q6v5_mss: Add MBA log extraction support

[Sibi Sankar]

On 2020-07-16 19:13, Manivannan Sadhasivam wrote:
> Hi Sibi,
> 
> On Thu, Jul 16, 2020 at 06:06:29PM +0530, Sibi Sankar wrote:
>> On SC7180 the MBA firmware stores the bootup text logs in a 4K segment
>> at the beginning of the MBA region. Add support to extract the logs
>> which will be useful to debug mba boot/authentication issues.
>> 
>> Signed-off-by: Sibi Sankar <sibis@codeaurora.org>
>> ---
>>  drivers/remoteproc/qcom_q6v5_mss.c | 41 
>> ++++++++++++++++++++++++++----
>>  1 file changed, 36 insertions(+), 5 deletions(-)
>> 
>> diff --git a/drivers/remoteproc/qcom_q6v5_mss.c 
>> b/drivers/remoteproc/qcom_q6v5_mss.c
>> index 95e21ed607cb9..4ddf084b2c6fc 100644
>> --- a/drivers/remoteproc/qcom_q6v5_mss.c
>> +++ b/drivers/remoteproc/qcom_q6v5_mss.c
>> @@ -9,6 +9,7 @@
>> 
>>  #include <linux/clk.h>
>>  #include <linux/delay.h>
>> +#include <linux/devcoredump.h>
>>  #include <linux/dma-mapping.h>
>>  #include <linux/interrupt.h>
>>  #include <linux/kernel.h>
>> @@ -37,6 +38,8 @@
>> 
>>  #define MPSS_CRASH_REASON_SMEM		421
>> 
>> +#define MBA_LOG_SIZE			SZ_4K
>> +
>>  /* RMB Status Register Values */
>>  #define RMB_PBL_SUCCESS			0x1
>> 
>> @@ -139,6 +142,7 @@ struct rproc_hexagon_res {
>>  	int version;
>>  	bool need_mem_protection;
>>  	bool has_alt_reset;
>> +	bool has_mba_logs;
>>  	bool has_spare_reg;
>>  };
>> 
>> @@ -200,6 +204,7 @@ struct q6v5 {
>>  	struct qcom_sysmon *sysmon;
>>  	bool need_mem_protection;
>>  	bool has_alt_reset;
>> +	bool has_mba_logs;
>>  	bool has_spare_reg;
>>  	int mpss_perm;
>>  	int mba_perm;
>> @@ -518,6 +523,19 @@ static int q6v5_rmb_mba_wait(struct q6v5 *qproc, 
>> u32 status, int ms)
>>  	return val;
>>  }
>> 
>> +static void q6v5_dump_mba_logs(struct q6v5 *qproc)
>> +{
>> +	struct rproc *rproc = qproc->rproc;
>> +	void *data;
>> +
>> +	data = vmalloc(MBA_LOG_SIZE);
> 
> Is there any specific reason to use vmalloc for the size of 4K?

data is passed onto dev_coredumpv
which takes ownership of the memory
and would eventually do a vfree of the
data.

> 
> Thanks,
> Mani
> 
>> +	if (!data)
>> +		return;
>> +
>> +	memcpy(data, qproc->mba_region, MBA_LOG_SIZE);
>> +	dev_coredumpv(&rproc->dev, data, MBA_LOG_SIZE, GFP_KERNEL);
>> +}
>> +
>>  static int q6v5proc_reset(struct q6v5 *qproc)
>>  {
>>  	u32 val;
>> @@ -838,6 +856,7 @@ static int q6v5_mba_load(struct q6v5 *qproc)
>>  {
>>  	int ret;
>>  	int xfermemop_ret;
>> +	bool mba_load_err = false;
>> 
>>  	qcom_q6v5_prepare(&qproc->q6v5);
>> 
>> @@ -931,7 +950,7 @@ static int q6v5_mba_load(struct q6v5 *qproc)
>>  	q6v5proc_halt_axi_port(qproc, qproc->halt_map, qproc->halt_q6);
>>  	q6v5proc_halt_axi_port(qproc, qproc->halt_map, qproc->halt_modem);
>>  	q6v5proc_halt_axi_port(qproc, qproc->halt_map, qproc->halt_nc);
>> -
>> +	mba_load_err = true;
>>  reclaim_mba:
>>  	xfermemop_ret = q6v5_xfer_mem_ownership(qproc, &qproc->mba_perm, 
>> true,
>>  						false, qproc->mba_phys,
>> @@ -939,6 +958,8 @@ static int q6v5_mba_load(struct q6v5 *qproc)
>>  	if (xfermemop_ret) {
>>  		dev_err(qproc->dev,
>>  			"Failed to reclaim mba buffer, system may become unstable\n");
>> +	} else if (qproc->has_mba_logs & mba_load_err) {
>> +		q6v5_dump_mba_logs(qproc);
>>  	}
>> 
>>  disable_active_clks:
>> @@ -968,7 +989,7 @@ static int q6v5_mba_load(struct q6v5 *qproc)
>>  	return ret;
>>  }
>> 
>> -static void q6v5_mba_reclaim(struct q6v5 *qproc)
>> +static void q6v5_mba_reclaim(struct q6v5 *qproc, bool err_path)
>>  {
>>  	int ret;
>>  	u32 val;
>> @@ -1006,6 +1027,9 @@ static void q6v5_mba_reclaim(struct q6v5 *qproc)
>>  				      qproc->mba_size);
>>  	WARN_ON(ret);
>> 
>> +	if (qproc->has_mba_logs && err_path && !ret)
>> +		q6v5_dump_mba_logs(qproc);
>> +
>>  	ret = qcom_q6v5_unprepare(&qproc->q6v5);
>>  	if (ret) {
>>  		q6v5_pds_disable(qproc, qproc->proxy_pds,
>> @@ -1255,7 +1279,7 @@ static void qcom_q6v5_dump_segment(struct rproc 
>> *rproc,
>>  						false, true,
>>  						qproc->mpss_phys,
>>  						qproc->mpss_size);
>> -			q6v5_mba_reclaim(qproc);
>> +			q6v5_mba_reclaim(qproc, false);
>>  		}
>>  	}
>>  }
>> @@ -1297,7 +1321,7 @@ static int q6v5_start(struct rproc *rproc)
>>  	return 0;
>> 
>>  reclaim_mpss:
>> -	q6v5_mba_reclaim(qproc);
>> +	q6v5_mba_reclaim(qproc, true);
>> 
>>  	return ret;
>>  }
>> @@ -1313,7 +1337,7 @@ static int q6v5_stop(struct rproc *rproc)
>>  	if (ret == -ETIMEDOUT)
>>  		dev_err(qproc->dev, "timed out on wait\n");
>> 
>> -	q6v5_mba_reclaim(qproc);
>> +	q6v5_mba_reclaim(qproc, false);
>> 
>>  	return 0;
>>  }
>> @@ -1717,6 +1741,7 @@ static int q6v5_probe(struct platform_device 
>> *pdev)
>> 
>>  	qproc->version = desc->version;
>>  	qproc->need_mem_protection = desc->need_mem_protection;
>> +	qproc->has_mba_logs = desc->has_mba_logs;
>> 
>>  	ret = qcom_q6v5_init(&qproc->q6v5, pdev, rproc, 
>> MPSS_CRASH_REASON_SMEM,
>>  			     qcom_msa_handover);
>> @@ -1808,6 +1833,7 @@ static const struct rproc_hexagon_res sc7180_mss 
>> = {
>>  	},
>>  	.need_mem_protection = true,
>>  	.has_alt_reset = false,
>> +	.has_mba_logs = true,
>>  	.has_spare_reg = true,
>>  	.version = MSS_SC7180,
>>  };
>> @@ -1843,6 +1869,7 @@ static const struct rproc_hexagon_res sdm845_mss 
>> = {
>>  	},
>>  	.need_mem_protection = true,
>>  	.has_alt_reset = true,
>> +	.has_mba_logs = true,
>>  	.has_spare_reg = false,
>>  	.version = MSS_SDM845,
>>  };
>> @@ -1870,6 +1897,7 @@ static const struct rproc_hexagon_res 
>> msm8998_mss = {
>>  	},
>>  	.need_mem_protection = true,
>>  	.has_alt_reset = false,
>> +	.has_mba_logs = false,
>>  	.has_spare_reg = false,
>>  	.version = MSS_MSM8998,
>>  };
>> @@ -1900,6 +1928,7 @@ static const struct rproc_hexagon_res 
>> msm8996_mss = {
>>  	},
>>  	.need_mem_protection = true,
>>  	.has_alt_reset = false,
>> +	.has_mba_logs = false,
>>  	.has_spare_reg = false,
>>  	.version = MSS_MSM8996,
>>  };
>> @@ -1933,6 +1962,7 @@ static const struct rproc_hexagon_res 
>> msm8916_mss = {
>>  	},
>>  	.need_mem_protection = false,
>>  	.has_alt_reset = false,
>> +	.has_mba_logs = false,
>>  	.has_spare_reg = false,
>>  	.version = MSS_MSM8916,
>>  };
>> @@ -1974,6 +2004,7 @@ static const struct rproc_hexagon_res 
>> msm8974_mss = {
>>  	},
>>  	.need_mem_protection = false,
>>  	.has_alt_reset = false,
>> +	.has_mba_logs = false,
>>  	.has_spare_reg = false,
>>  	.version = MSS_MSM8974,
>>  };
>> --
>> The Qualcomm Innovation Center, Inc. is a member of the Code Aurora 
>> Forum,
>> a Linux Foundation Collaborative Project
>> 

-- 
Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum,
a Linux Foundation Collaborative Project.

Re: [PATCH 2/3] remoteproc: qcom_q6v5_mss: Add MBA log extraction support

[Manivannan Sadhasivam]

On Thu, Jul 16, 2020 at 08:28:50PM +0530, Sibi Sankar wrote:
> On 2020-07-16 19:13, Manivannan Sadhasivam wrote:
> > Hi Sibi,
> > 
> > On Thu, Jul 16, 2020 at 06:06:29PM +0530, Sibi Sankar wrote:
> > > On SC7180 the MBA firmware stores the bootup text logs in a 4K segment
> > > at the beginning of the MBA region. Add support to extract the logs
> > > which will be useful to debug mba boot/authentication issues.
> > > 
> > > Signed-off-by: Sibi Sankar <sibis@codeaurora.org>
> > > ---
> > >  drivers/remoteproc/qcom_q6v5_mss.c | 41
> > > ++++++++++++++++++++++++++----
> > >  1 file changed, 36 insertions(+), 5 deletions(-)
> > > 
> > > diff --git a/drivers/remoteproc/qcom_q6v5_mss.c
> > > b/drivers/remoteproc/qcom_q6v5_mss.c
> > > index 95e21ed607cb9..4ddf084b2c6fc 100644
> > > --- a/drivers/remoteproc/qcom_q6v5_mss.c
> > > +++ b/drivers/remoteproc/qcom_q6v5_mss.c
> > > @@ -9,6 +9,7 @@
> > > 
> > >  #include <linux/clk.h>
> > >  #include <linux/delay.h>
> > > +#include <linux/devcoredump.h>
> > >  #include <linux/dma-mapping.h>
> > >  #include <linux/interrupt.h>
> > >  #include <linux/kernel.h>
> > > @@ -37,6 +38,8 @@
> > > 
> > >  #define MPSS_CRASH_REASON_SMEM		421
> > > 
> > > +#define MBA_LOG_SIZE			SZ_4K
> > > +
> > >  /* RMB Status Register Values */
> > >  #define RMB_PBL_SUCCESS			0x1
> > > 
> > > @@ -139,6 +142,7 @@ struct rproc_hexagon_res {
> > >  	int version;
> > >  	bool need_mem_protection;
> > >  	bool has_alt_reset;
> > > +	bool has_mba_logs;
> > >  	bool has_spare_reg;
> > >  };
> > > 
> > > @@ -200,6 +204,7 @@ struct q6v5 {
> > >  	struct qcom_sysmon *sysmon;
> > >  	bool need_mem_protection;
> > >  	bool has_alt_reset;
> > > +	bool has_mba_logs;
> > >  	bool has_spare_reg;
> > >  	int mpss_perm;
> > >  	int mba_perm;
> > > @@ -518,6 +523,19 @@ static int q6v5_rmb_mba_wait(struct q6v5
> > > *qproc, u32 status, int ms)
> > >  	return val;
> > >  }
> > > 
> > > +static void q6v5_dump_mba_logs(struct q6v5 *qproc)
> > > +{
> > > +	struct rproc *rproc = qproc->rproc;
> > > +	void *data;
> > > +
> > > +	data = vmalloc(MBA_LOG_SIZE);
> > 
> > Is there any specific reason to use vmalloc for the size of 4K?
> 
> data is passed onto dev_coredumpv
> which takes ownership of the memory
> and would eventually do a vfree of the
> data.
> 

Ah, okay.

Thanks,
Mani

> > 
> > Thanks,
> > Mani
> > 
> > > +	if (!data)
> > > +		return;
> > > +
> > > +	memcpy(data, qproc->mba_region, MBA_LOG_SIZE);
> > > +	dev_coredumpv(&rproc->dev, data, MBA_LOG_SIZE, GFP_KERNEL);
> > > +}
> > > +
> > >  static int q6v5proc_reset(struct q6v5 *qproc)
> > >  {
> > >  	u32 val;
> > > @@ -838,6 +856,7 @@ static int q6v5_mba_load(struct q6v5 *qproc)
> > >  {
> > >  	int ret;
> > >  	int xfermemop_ret;
> > > +	bool mba_load_err = false;
> > > 
> > >  	qcom_q6v5_prepare(&qproc->q6v5);
> > > 
> > > @@ -931,7 +950,7 @@ static int q6v5_mba_load(struct q6v5 *qproc)
> > >  	q6v5proc_halt_axi_port(qproc, qproc->halt_map, qproc->halt_q6);
> > >  	q6v5proc_halt_axi_port(qproc, qproc->halt_map, qproc->halt_modem);
> > >  	q6v5proc_halt_axi_port(qproc, qproc->halt_map, qproc->halt_nc);
> > > -
> > > +	mba_load_err = true;
> > >  reclaim_mba:
> > >  	xfermemop_ret = q6v5_xfer_mem_ownership(qproc, &qproc->mba_perm,
> > > true,
> > >  						false, qproc->mba_phys,
> > > @@ -939,6 +958,8 @@ static int q6v5_mba_load(struct q6v5 *qproc)
> > >  	if (xfermemop_ret) {
> > >  		dev_err(qproc->dev,
> > >  			"Failed to reclaim mba buffer, system may become unstable\n");
> > > +	} else if (qproc->has_mba_logs & mba_load_err) {
> > > +		q6v5_dump_mba_logs(qproc);
> > >  	}
> > > 
> > >  disable_active_clks:
> > > @@ -968,7 +989,7 @@ static int q6v5_mba_load(struct q6v5 *qproc)
> > >  	return ret;
> > >  }
> > > 
> > > -static void q6v5_mba_reclaim(struct q6v5 *qproc)
> > > +static void q6v5_mba_reclaim(struct q6v5 *qproc, bool err_path)
> > >  {
> > >  	int ret;
> > >  	u32 val;
> > > @@ -1006,6 +1027,9 @@ static void q6v5_mba_reclaim(struct q6v5 *qproc)
> > >  				      qproc->mba_size);
> > >  	WARN_ON(ret);
> > > 
> > > +	if (qproc->has_mba_logs && err_path && !ret)
> > > +		q6v5_dump_mba_logs(qproc);
> > > +
> > >  	ret = qcom_q6v5_unprepare(&qproc->q6v5);
> > >  	if (ret) {
> > >  		q6v5_pds_disable(qproc, qproc->proxy_pds,
> > > @@ -1255,7 +1279,7 @@ static void qcom_q6v5_dump_segment(struct
> > > rproc *rproc,
> > >  						false, true,
> > >  						qproc->mpss_phys,
> > >  						qproc->mpss_size);
> > > -			q6v5_mba_reclaim(qproc);
> > > +			q6v5_mba_reclaim(qproc, false);
> > >  		}
> > >  	}
> > >  }
> > > @@ -1297,7 +1321,7 @@ static int q6v5_start(struct rproc *rproc)
> > >  	return 0;
> > > 
> > >  reclaim_mpss:
> > > -	q6v5_mba_reclaim(qproc);
> > > +	q6v5_mba_reclaim(qproc, true);
> > > 
> > >  	return ret;
> > >  }
> > > @@ -1313,7 +1337,7 @@ static int q6v5_stop(struct rproc *rproc)
> > >  	if (ret == -ETIMEDOUT)
> > >  		dev_err(qproc->dev, "timed out on wait\n");
> > > 
> > > -	q6v5_mba_reclaim(qproc);
> > > +	q6v5_mba_reclaim(qproc, false);
> > > 
> > >  	return 0;
> > >  }
> > > @@ -1717,6 +1741,7 @@ static int q6v5_probe(struct platform_device
> > > *pdev)
> > > 
> > >  	qproc->version = desc->version;
> > >  	qproc->need_mem_protection = desc->need_mem_protection;
> > > +	qproc->has_mba_logs = desc->has_mba_logs;
> > > 
> > >  	ret = qcom_q6v5_init(&qproc->q6v5, pdev, rproc,
> > > MPSS_CRASH_REASON_SMEM,
> > >  			     qcom_msa_handover);
> > > @@ -1808,6 +1833,7 @@ static const struct rproc_hexagon_res
> > > sc7180_mss = {
> > >  	},
> > >  	.need_mem_protection = true,
> > >  	.has_alt_reset = false,
> > > +	.has_mba_logs = true,
> > >  	.has_spare_reg = true,
> > >  	.version = MSS_SC7180,
> > >  };
> > > @@ -1843,6 +1869,7 @@ static const struct rproc_hexagon_res
> > > sdm845_mss = {
> > >  	},
> > >  	.need_mem_protection = true,
> > >  	.has_alt_reset = true,
> > > +	.has_mba_logs = true,
> > >  	.has_spare_reg = false,
> > >  	.version = MSS_SDM845,
> > >  };
> > > @@ -1870,6 +1897,7 @@ static const struct rproc_hexagon_res
> > > msm8998_mss = {
> > >  	},
> > >  	.need_mem_protection = true,
> > >  	.has_alt_reset = false,
> > > +	.has_mba_logs = false,
> > >  	.has_spare_reg = false,
> > >  	.version = MSS_MSM8998,
> > >  };
> > > @@ -1900,6 +1928,7 @@ static const struct rproc_hexagon_res
> > > msm8996_mss = {
> > >  	},
> > >  	.need_mem_protection = true,
> > >  	.has_alt_reset = false,
> > > +	.has_mba_logs = false,
> > >  	.has_spare_reg = false,
> > >  	.version = MSS_MSM8996,
> > >  };
> > > @@ -1933,6 +1962,7 @@ static const struct rproc_hexagon_res
> > > msm8916_mss = {
> > >  	},
> > >  	.need_mem_protection = false,
> > >  	.has_alt_reset = false,
> > > +	.has_mba_logs = false,
> > >  	.has_spare_reg = false,
> > >  	.version = MSS_MSM8916,
> > >  };
> > > @@ -1974,6 +2004,7 @@ static const struct rproc_hexagon_res
> > > msm8974_mss = {
> > >  	},
> > >  	.need_mem_protection = false,
> > >  	.has_alt_reset = false,
> > > +	.has_mba_logs = false,
> > >  	.has_spare_reg = false,
> > >  	.version = MSS_MSM8974,
> > >  };
> > > --
> > > The Qualcomm Innovation Center, Inc. is a member of the Code Aurora
> > > Forum,
> > > a Linux Foundation Collaborative Project
> > > 
> 
> -- 
> Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum,
> a Linux Foundation Collaborative Project.

Re: [PATCH 2/3] remoteproc: qcom_q6v5_mss: Add MBA log extraction support

[Bjorn Andersson]

On Thu 16 Jul 05:36 PDT 2020, Sibi Sankar wrote:

> On SC7180 the MBA firmware stores the bootup text logs in a 4K segment
> at the beginning of the MBA region. Add support to extract the logs
> which will be useful to debug mba boot/authentication issues.
> 
> Signed-off-by: Sibi Sankar <sibis@codeaurora.org>
> ---
>  drivers/remoteproc/qcom_q6v5_mss.c | 41 ++++++++++++++++++++++++++----
>  1 file changed, 36 insertions(+), 5 deletions(-)
> 
> diff --git a/drivers/remoteproc/qcom_q6v5_mss.c b/drivers/remoteproc/qcom_q6v5_mss.c
> index 95e21ed607cb9..4ddf084b2c6fc 100644
> --- a/drivers/remoteproc/qcom_q6v5_mss.c
> +++ b/drivers/remoteproc/qcom_q6v5_mss.c
> @@ -9,6 +9,7 @@
>  
>  #include <linux/clk.h>
>  #include <linux/delay.h>
> +#include <linux/devcoredump.h>
>  #include <linux/dma-mapping.h>
>  #include <linux/interrupt.h>
>  #include <linux/kernel.h>
> @@ -37,6 +38,8 @@
>  
>  #define MPSS_CRASH_REASON_SMEM		421
>  
> +#define MBA_LOG_SIZE			SZ_4K
> +
>  /* RMB Status Register Values */
>  #define RMB_PBL_SUCCESS			0x1
>  
> @@ -139,6 +142,7 @@ struct rproc_hexagon_res {
>  	int version;
>  	bool need_mem_protection;
>  	bool has_alt_reset;
> +	bool has_mba_logs;
>  	bool has_spare_reg;
>  };
>  
> @@ -200,6 +204,7 @@ struct q6v5 {
>  	struct qcom_sysmon *sysmon;
>  	bool need_mem_protection;
>  	bool has_alt_reset;
> +	bool has_mba_logs;
>  	bool has_spare_reg;
>  	int mpss_perm;
>  	int mba_perm;
> @@ -518,6 +523,19 @@ static int q6v5_rmb_mba_wait(struct q6v5 *qproc, u32 status, int ms)
>  	return val;
>  }
>  
> +static void q6v5_dump_mba_logs(struct q6v5 *qproc)
> +{
> +	struct rproc *rproc = qproc->rproc;
> +	void *data;
> +
> +	data = vmalloc(MBA_LOG_SIZE);
> +	if (!data)
> +		return;
> +
> +	memcpy(data, qproc->mba_region, MBA_LOG_SIZE);
> +	dev_coredumpv(&rproc->dev, data, MBA_LOG_SIZE, GFP_KERNEL);
> +}
> +
>  static int q6v5proc_reset(struct q6v5 *qproc)
>  {
>  	u32 val;
> @@ -838,6 +856,7 @@ static int q6v5_mba_load(struct q6v5 *qproc)
>  {
>  	int ret;
>  	int xfermemop_ret;
> +	bool mba_load_err = false;
>  
>  	qcom_q6v5_prepare(&qproc->q6v5);
>  
> @@ -931,7 +950,7 @@ static int q6v5_mba_load(struct q6v5 *qproc)
>  	q6v5proc_halt_axi_port(qproc, qproc->halt_map, qproc->halt_q6);
>  	q6v5proc_halt_axi_port(qproc, qproc->halt_map, qproc->halt_modem);
>  	q6v5proc_halt_axi_port(qproc, qproc->halt_map, qproc->halt_nc);
> -
> +	mba_load_err = true;
>  reclaim_mba:
>  	xfermemop_ret = q6v5_xfer_mem_ownership(qproc, &qproc->mba_perm, true,
>  						false, qproc->mba_phys,
> @@ -939,6 +958,8 @@ static int q6v5_mba_load(struct q6v5 *qproc)
>  	if (xfermemop_ret) {
>  		dev_err(qproc->dev,
>  			"Failed to reclaim mba buffer, system may become unstable\n");
> +	} else if (qproc->has_mba_logs & mba_load_err) {
> +		q6v5_dump_mba_logs(qproc);
>  	}
>  
>  disable_active_clks:
> @@ -968,7 +989,7 @@ static int q6v5_mba_load(struct q6v5 *qproc)
>  	return ret;
>  }
>  
> -static void q6v5_mba_reclaim(struct q6v5 *qproc)
> +static void q6v5_mba_reclaim(struct q6v5 *qproc, bool err_path)
>  {
>  	int ret;
>  	u32 val;
> @@ -1006,6 +1027,9 @@ static void q6v5_mba_reclaim(struct q6v5 *qproc)
>  				      qproc->mba_size);
>  	WARN_ON(ret);
>  
> +	if (qproc->has_mba_logs && err_path && !ret)

Wouldn't it be possible to just call q6v5_dump_mba_logs() directly after
the return from q6v5_mba_reclaim()? That way we can avoid passing the
bool to indicate if the reclaim should also dump some stuff.

Sure we don't have a way to tell if the assign_mem failed, but we're
going to crash shortly anyways (which is something we should change).



I think you should move the has_mba_logs into q6v5_dump_mba_logs(),
making it cause an early return.

Regards,
Bjorn

> +		q6v5_dump_mba_logs(qproc);
> +
>  	ret = qcom_q6v5_unprepare(&qproc->q6v5);
>  	if (ret) {
>  		q6v5_pds_disable(qproc, qproc->proxy_pds,
> @@ -1255,7 +1279,7 @@ static void qcom_q6v5_dump_segment(struct rproc *rproc,
>  						false, true,
>  						qproc->mpss_phys,
>  						qproc->mpss_size);
> -			q6v5_mba_reclaim(qproc);
> +			q6v5_mba_reclaim(qproc, false);
>  		}
>  	}
>  }
> @@ -1297,7 +1321,7 @@ static int q6v5_start(struct rproc *rproc)
>  	return 0;
>  
>  reclaim_mpss:
> -	q6v5_mba_reclaim(qproc);
> +	q6v5_mba_reclaim(qproc, true);
>  
>  	return ret;
>  }
> @@ -1313,7 +1337,7 @@ static int q6v5_stop(struct rproc *rproc)
>  	if (ret == -ETIMEDOUT)
>  		dev_err(qproc->dev, "timed out on wait\n");
>  
> -	q6v5_mba_reclaim(qproc);
> +	q6v5_mba_reclaim(qproc, false);
>  
>  	return 0;
>  }
> @@ -1717,6 +1741,7 @@ static int q6v5_probe(struct platform_device *pdev)
>  
>  	qproc->version = desc->version;
>  	qproc->need_mem_protection = desc->need_mem_protection;
> +	qproc->has_mba_logs = desc->has_mba_logs;
>  
>  	ret = qcom_q6v5_init(&qproc->q6v5, pdev, rproc, MPSS_CRASH_REASON_SMEM,
>  			     qcom_msa_handover);
> @@ -1808,6 +1833,7 @@ static const struct rproc_hexagon_res sc7180_mss = {
>  	},
>  	.need_mem_protection = true,
>  	.has_alt_reset = false,
> +	.has_mba_logs = true,
>  	.has_spare_reg = true,
>  	.version = MSS_SC7180,
>  };
> @@ -1843,6 +1869,7 @@ static const struct rproc_hexagon_res sdm845_mss = {
>  	},
>  	.need_mem_protection = true,
>  	.has_alt_reset = true,
> +	.has_mba_logs = true,
>  	.has_spare_reg = false,
>  	.version = MSS_SDM845,
>  };
> @@ -1870,6 +1897,7 @@ static const struct rproc_hexagon_res msm8998_mss = {
>  	},
>  	.need_mem_protection = true,
>  	.has_alt_reset = false,
> +	.has_mba_logs = false,
>  	.has_spare_reg = false,
>  	.version = MSS_MSM8998,
>  };
> @@ -1900,6 +1928,7 @@ static const struct rproc_hexagon_res msm8996_mss = {
>  	},
>  	.need_mem_protection = true,
>  	.has_alt_reset = false,
> +	.has_mba_logs = false,
>  	.has_spare_reg = false,
>  	.version = MSS_MSM8996,
>  };
> @@ -1933,6 +1962,7 @@ static const struct rproc_hexagon_res msm8916_mss = {
>  	},
>  	.need_mem_protection = false,
>  	.has_alt_reset = false,
> +	.has_mba_logs = false,
>  	.has_spare_reg = false,
>  	.version = MSS_MSM8916,
>  };
> @@ -1974,6 +2004,7 @@ static const struct rproc_hexagon_res msm8974_mss = {
>  	},
>  	.need_mem_protection = false,
>  	.has_alt_reset = false,
> +	.has_mba_logs = false,
>  	.has_spare_reg = false,
>  	.version = MSS_MSM8974,
>  };
> -- 
> The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
> a Linux Foundation Collaborative Project
> 

Re: [PATCH 2/3] remoteproc: qcom_q6v5_mss: Add MBA log extraction support

[Sibi Sankar]

On 2020-07-17 10:27, Bjorn Andersson wrote:
> On Thu 16 Jul 05:36 PDT 2020, Sibi Sankar wrote:
> 
>> On SC7180 the MBA firmware stores the bootup text logs in a 4K segment
>> at the beginning of the MBA region. Add support to extract the logs
>> which will be useful to debug mba boot/authentication issues.
>> 
>> Signed-off-by: Sibi Sankar <sibis@codeaurora.org>
>> ---
>>  drivers/remoteproc/qcom_q6v5_mss.c | 41 
>> ++++++++++++++++++++++++++----
>>  1 file changed, 36 insertions(+), 5 deletions(-)
>> 
>> diff --git a/drivers/remoteproc/qcom_q6v5_mss.c 
>> b/drivers/remoteproc/qcom_q6v5_mss.c
>> index 95e21ed607cb9..4ddf084b2c6fc 100644
>> --- a/drivers/remoteproc/qcom_q6v5_mss.c
>> +++ b/drivers/remoteproc/qcom_q6v5_mss.c
>> @@ -9,6 +9,7 @@
>> 
>>  #include <linux/clk.h>
>>  #include <linux/delay.h>
>> +#include <linux/devcoredump.h>
>>  #include <linux/dma-mapping.h>
>>  #include <linux/interrupt.h>
>>  #include <linux/kernel.h>
>> @@ -37,6 +38,8 @@
>> 
>>  #define MPSS_CRASH_REASON_SMEM		421
>> 
>> +#define MBA_LOG_SIZE			SZ_4K
>> +
>>  /* RMB Status Register Values */
>>  #define RMB_PBL_SUCCESS			0x1
>> 
>> @@ -139,6 +142,7 @@ struct rproc_hexagon_res {
>>  	int version;
>>  	bool need_mem_protection;
>>  	bool has_alt_reset;
>> +	bool has_mba_logs;
>>  	bool has_spare_reg;
>>  };
>> 
>> @@ -200,6 +204,7 @@ struct q6v5 {
>>  	struct qcom_sysmon *sysmon;
>>  	bool need_mem_protection;
>>  	bool has_alt_reset;
>> +	bool has_mba_logs;
>>  	bool has_spare_reg;
>>  	int mpss_perm;
>>  	int mba_perm;
>> @@ -518,6 +523,19 @@ static int q6v5_rmb_mba_wait(struct q6v5 *qproc, 
>> u32 status, int ms)
>>  	return val;
>>  }
>> 
>> +static void q6v5_dump_mba_logs(struct q6v5 *qproc)
>> +{
>> +	struct rproc *rproc = qproc->rproc;
>> +	void *data;
>> +
>> +	data = vmalloc(MBA_LOG_SIZE);
>> +	if (!data)
>> +		return;
>> +
>> +	memcpy(data, qproc->mba_region, MBA_LOG_SIZE);
>> +	dev_coredumpv(&rproc->dev, data, MBA_LOG_SIZE, GFP_KERNEL);
>> +}
>> +
>>  static int q6v5proc_reset(struct q6v5 *qproc)
>>  {
>>  	u32 val;
>> @@ -838,6 +856,7 @@ static int q6v5_mba_load(struct q6v5 *qproc)
>>  {
>>  	int ret;
>>  	int xfermemop_ret;
>> +	bool mba_load_err = false;
>> 
>>  	qcom_q6v5_prepare(&qproc->q6v5);
>> 
>> @@ -931,7 +950,7 @@ static int q6v5_mba_load(struct q6v5 *qproc)
>>  	q6v5proc_halt_axi_port(qproc, qproc->halt_map, qproc->halt_q6);
>>  	q6v5proc_halt_axi_port(qproc, qproc->halt_map, qproc->halt_modem);
>>  	q6v5proc_halt_axi_port(qproc, qproc->halt_map, qproc->halt_nc);
>> -
>> +	mba_load_err = true;
>>  reclaim_mba:
>>  	xfermemop_ret = q6v5_xfer_mem_ownership(qproc, &qproc->mba_perm, 
>> true,
>>  						false, qproc->mba_phys,
>> @@ -939,6 +958,8 @@ static int q6v5_mba_load(struct q6v5 *qproc)
>>  	if (xfermemop_ret) {
>>  		dev_err(qproc->dev,
>>  			"Failed to reclaim mba buffer, system may become unstable\n");
>> +	} else if (qproc->has_mba_logs & mba_load_err) {
>> +		q6v5_dump_mba_logs(qproc);
>>  	}
>> 
>>  disable_active_clks:
>> @@ -968,7 +989,7 @@ static int q6v5_mba_load(struct q6v5 *qproc)
>>  	return ret;
>>  }
>> 
>> -static void q6v5_mba_reclaim(struct q6v5 *qproc)
>> +static void q6v5_mba_reclaim(struct q6v5 *qproc, bool err_path)
>>  {
>>  	int ret;
>>  	u32 val;
>> @@ -1006,6 +1027,9 @@ static void q6v5_mba_reclaim(struct q6v5 *qproc)
>>  				      qproc->mba_size);
>>  	WARN_ON(ret);
>> 
>> +	if (qproc->has_mba_logs && err_path && !ret)
> 
> Wouldn't it be possible to just call q6v5_dump_mba_logs() directly 
> after
> the return from q6v5_mba_reclaim()? That way we can avoid passing the
> bool to indicate if the reclaim should also dump some stuff.
> 
> Sure we don't have a way to tell if the assign_mem failed, but we're
> going to crash shortly anyways (which is something we should change).

We wont crash as long as we dont touch
the mba region though. Trying a mba
logs dump in such a case will ensure
that we crash lol.

> 
> 
> 
> I think you should move the has_mba_logs into q6v5_dump_mba_logs(),
> making it cause an early return.

cool sure I'll do that.

> 
> Regards,
> Bjorn
> 
>> +		q6v5_dump_mba_logs(qproc);
>> +
>>  	ret = qcom_q6v5_unprepare(&qproc->q6v5);
>>  	if (ret) {
>>  		q6v5_pds_disable(qproc, qproc->proxy_pds,
>> @@ -1255,7 +1279,7 @@ static void qcom_q6v5_dump_segment(struct rproc 
>> *rproc,
>>  						false, true,
>>  						qproc->mpss_phys,
>>  						qproc->mpss_size);
>> -			q6v5_mba_reclaim(qproc);
>> +			q6v5_mba_reclaim(qproc, false);
>>  		}
>>  	}
>>  }
>> @@ -1297,7 +1321,7 @@ static int q6v5_start(struct rproc *rproc)
>>  	return 0;
>> 
>>  reclaim_mpss:
>> -	q6v5_mba_reclaim(qproc);
>> +	q6v5_mba_reclaim(qproc, true);
>> 
>>  	return ret;
>>  }
>> @@ -1313,7 +1337,7 @@ static int q6v5_stop(struct rproc *rproc)
>>  	if (ret == -ETIMEDOUT)
>>  		dev_err(qproc->dev, "timed out on wait\n");
>> 
>> -	q6v5_mba_reclaim(qproc);
>> +	q6v5_mba_reclaim(qproc, false);
>> 
>>  	return 0;
>>  }
>> @@ -1717,6 +1741,7 @@ static int q6v5_probe(struct platform_device 
>> *pdev)
>> 
>>  	qproc->version = desc->version;
>>  	qproc->need_mem_protection = desc->need_mem_protection;
>> +	qproc->has_mba_logs = desc->has_mba_logs;
>> 
>>  	ret = qcom_q6v5_init(&qproc->q6v5, pdev, rproc, 
>> MPSS_CRASH_REASON_SMEM,
>>  			     qcom_msa_handover);
>> @@ -1808,6 +1833,7 @@ static const struct rproc_hexagon_res sc7180_mss 
>> = {
>>  	},
>>  	.need_mem_protection = true,
>>  	.has_alt_reset = false,
>> +	.has_mba_logs = true,
>>  	.has_spare_reg = true,
>>  	.version = MSS_SC7180,
>>  };
>> @@ -1843,6 +1869,7 @@ static const struct rproc_hexagon_res sdm845_mss 
>> = {
>>  	},
>>  	.need_mem_protection = true,
>>  	.has_alt_reset = true,
>> +	.has_mba_logs = true,
>>  	.has_spare_reg = false,
>>  	.version = MSS_SDM845,
>>  };
>> @@ -1870,6 +1897,7 @@ static const struct rproc_hexagon_res 
>> msm8998_mss = {
>>  	},
>>  	.need_mem_protection = true,
>>  	.has_alt_reset = false,
>> +	.has_mba_logs = false,
>>  	.has_spare_reg = false,
>>  	.version = MSS_MSM8998,
>>  };
>> @@ -1900,6 +1928,7 @@ static const struct rproc_hexagon_res 
>> msm8996_mss = {
>>  	},
>>  	.need_mem_protection = true,
>>  	.has_alt_reset = false,
>> +	.has_mba_logs = false,
>>  	.has_spare_reg = false,
>>  	.version = MSS_MSM8996,
>>  };
>> @@ -1933,6 +1962,7 @@ static const struct rproc_hexagon_res 
>> msm8916_mss = {
>>  	},
>>  	.need_mem_protection = false,
>>  	.has_alt_reset = false,
>> +	.has_mba_logs = false,
>>  	.has_spare_reg = false,
>>  	.version = MSS_MSM8916,
>>  };
>> @@ -1974,6 +2004,7 @@ static const struct rproc_hexagon_res 
>> msm8974_mss = {
>>  	},
>>  	.need_mem_protection = false,
>>  	.has_alt_reset = false,
>> +	.has_mba_logs = false,
>>  	.has_spare_reg = false,
>>  	.version = MSS_MSM8974,
>>  };
>> --
>> The Qualcomm Innovation Center, Inc. is a member of the Code Aurora 
>> Forum,
>> a Linux Foundation Collaborative Project
>> 

-- 
Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum,
a Linux Foundation Collaborative Project.

Re: [PATCH 2/3] remoteproc: qcom_q6v5_mss: Add MBA log extraction support

[Bjorn Andersson]

On Thu 16 Jul 22:22 PDT 2020, Sibi Sankar wrote:

> On 2020-07-17 10:27, Bjorn Andersson wrote:
> > On Thu 16 Jul 05:36 PDT 2020, Sibi Sankar wrote:
> > 
> > > On SC7180 the MBA firmware stores the bootup text logs in a 4K segment
> > > at the beginning of the MBA region. Add support to extract the logs
> > > which will be useful to debug mba boot/authentication issues.
> > > 
> > > Signed-off-by: Sibi Sankar <sibis@codeaurora.org>
> > > ---
> > >  drivers/remoteproc/qcom_q6v5_mss.c | 41
> > > ++++++++++++++++++++++++++----
> > >  1 file changed, 36 insertions(+), 5 deletions(-)
> > > 
> > > diff --git a/drivers/remoteproc/qcom_q6v5_mss.c
> > > b/drivers/remoteproc/qcom_q6v5_mss.c
> > > index 95e21ed607cb9..4ddf084b2c6fc 100644
> > > --- a/drivers/remoteproc/qcom_q6v5_mss.c
> > > +++ b/drivers/remoteproc/qcom_q6v5_mss.c
> > > @@ -9,6 +9,7 @@
> > > 
> > >  #include <linux/clk.h>
> > >  #include <linux/delay.h>
> > > +#include <linux/devcoredump.h>
> > >  #include <linux/dma-mapping.h>
> > >  #include <linux/interrupt.h>
> > >  #include <linux/kernel.h>
> > > @@ -37,6 +38,8 @@
> > > 
> > >  #define MPSS_CRASH_REASON_SMEM		421
> > > 
> > > +#define MBA_LOG_SIZE			SZ_4K
> > > +
> > >  /* RMB Status Register Values */
> > >  #define RMB_PBL_SUCCESS			0x1
> > > 
> > > @@ -139,6 +142,7 @@ struct rproc_hexagon_res {
> > >  	int version;
> > >  	bool need_mem_protection;
> > >  	bool has_alt_reset;
> > > +	bool has_mba_logs;
> > >  	bool has_spare_reg;
> > >  };
> > > 
> > > @@ -200,6 +204,7 @@ struct q6v5 {
> > >  	struct qcom_sysmon *sysmon;
> > >  	bool need_mem_protection;
> > >  	bool has_alt_reset;
> > > +	bool has_mba_logs;
> > >  	bool has_spare_reg;
> > >  	int mpss_perm;
> > >  	int mba_perm;
> > > @@ -518,6 +523,19 @@ static int q6v5_rmb_mba_wait(struct q6v5
> > > *qproc, u32 status, int ms)
> > >  	return val;
> > >  }
> > > 
> > > +static void q6v5_dump_mba_logs(struct q6v5 *qproc)
> > > +{
> > > +	struct rproc *rproc = qproc->rproc;
> > > +	void *data;
> > > +
> > > +	data = vmalloc(MBA_LOG_SIZE);
> > > +	if (!data)
> > > +		return;
> > > +
> > > +	memcpy(data, qproc->mba_region, MBA_LOG_SIZE);
> > > +	dev_coredumpv(&rproc->dev, data, MBA_LOG_SIZE, GFP_KERNEL);
> > > +}
> > > +
> > >  static int q6v5proc_reset(struct q6v5 *qproc)
> > >  {
> > >  	u32 val;
> > > @@ -838,6 +856,7 @@ static int q6v5_mba_load(struct q6v5 *qproc)
> > >  {
> > >  	int ret;
> > >  	int xfermemop_ret;
> > > +	bool mba_load_err = false;
> > > 
> > >  	qcom_q6v5_prepare(&qproc->q6v5);
> > > 
> > > @@ -931,7 +950,7 @@ static int q6v5_mba_load(struct q6v5 *qproc)
> > >  	q6v5proc_halt_axi_port(qproc, qproc->halt_map, qproc->halt_q6);
> > >  	q6v5proc_halt_axi_port(qproc, qproc->halt_map, qproc->halt_modem);
> > >  	q6v5proc_halt_axi_port(qproc, qproc->halt_map, qproc->halt_nc);
> > > -
> > > +	mba_load_err = true;
> > >  reclaim_mba:
> > >  	xfermemop_ret = q6v5_xfer_mem_ownership(qproc, &qproc->mba_perm,
> > > true,
> > >  						false, qproc->mba_phys,
> > > @@ -939,6 +958,8 @@ static int q6v5_mba_load(struct q6v5 *qproc)
> > >  	if (xfermemop_ret) {
> > >  		dev_err(qproc->dev,
> > >  			"Failed to reclaim mba buffer, system may become unstable\n");
> > > +	} else if (qproc->has_mba_logs & mba_load_err) {
> > > +		q6v5_dump_mba_logs(qproc);
> > >  	}
> > > 
> > >  disable_active_clks:
> > > @@ -968,7 +989,7 @@ static int q6v5_mba_load(struct q6v5 *qproc)
> > >  	return ret;
> > >  }
> > > 
> > > -static void q6v5_mba_reclaim(struct q6v5 *qproc)
> > > +static void q6v5_mba_reclaim(struct q6v5 *qproc, bool err_path)
> > >  {
> > >  	int ret;
> > >  	u32 val;
> > > @@ -1006,6 +1027,9 @@ static void q6v5_mba_reclaim(struct q6v5 *qproc)
> > >  				      qproc->mba_size);
> > >  	WARN_ON(ret);
> > > 
> > > +	if (qproc->has_mba_logs && err_path && !ret)
> > 
> > Wouldn't it be possible to just call q6v5_dump_mba_logs() directly after
> > the return from q6v5_mba_reclaim()? That way we can avoid passing the
> > bool to indicate if the reclaim should also dump some stuff.
> > 
> > Sure we don't have a way to tell if the assign_mem failed, but we're
> > going to crash shortly anyways (which is something we should change).
> 
> We wont crash as long as we dont touch
> the mba region though. Trying a mba
> logs dump in such a case will ensure
> that we crash lol.
> 

Right, but that means that if we ever try to start the remoteproc again
it will crash on us.

So what I meant at the end there is that we should either have a
mechanism to ensure that no further accesses are attempted (e.g.
prohibit a subsequent "start") or this might actually be a valid case
for a BUG_ON().

Regards,
Bjorn

> > 
> > 
> > 
> > I think you should move the has_mba_logs into q6v5_dump_mba_logs(),
> > making it cause an early return.
> 
> cool sure I'll do that.
> 
> > 
> > Regards,
> > Bjorn
> > 
> > > +		q6v5_dump_mba_logs(qproc);
> > > +
> > >  	ret = qcom_q6v5_unprepare(&qproc->q6v5);
> > >  	if (ret) {
> > >  		q6v5_pds_disable(qproc, qproc->proxy_pds,
> > > @@ -1255,7 +1279,7 @@ static void qcom_q6v5_dump_segment(struct
> > > rproc *rproc,
> > >  						false, true,
> > >  						qproc->mpss_phys,
> > >  						qproc->mpss_size);
> > > -			q6v5_mba_reclaim(qproc);
> > > +			q6v5_mba_reclaim(qproc, false);
> > >  		}
> > >  	}
> > >  }
> > > @@ -1297,7 +1321,7 @@ static int q6v5_start(struct rproc *rproc)
> > >  	return 0;
> > > 
> > >  reclaim_mpss:
> > > -	q6v5_mba_reclaim(qproc);
> > > +	q6v5_mba_reclaim(qproc, true);
> > > 
> > >  	return ret;
> > >  }
> > > @@ -1313,7 +1337,7 @@ static int q6v5_stop(struct rproc *rproc)
> > >  	if (ret == -ETIMEDOUT)
> > >  		dev_err(qproc->dev, "timed out on wait\n");
> > > 
> > > -	q6v5_mba_reclaim(qproc);
> > > +	q6v5_mba_reclaim(qproc, false);
> > > 
> > >  	return 0;
> > >  }
> > > @@ -1717,6 +1741,7 @@ static int q6v5_probe(struct platform_device
> > > *pdev)
> > > 
> > >  	qproc->version = desc->version;
> > >  	qproc->need_mem_protection = desc->need_mem_protection;
> > > +	qproc->has_mba_logs = desc->has_mba_logs;
> > > 
> > >  	ret = qcom_q6v5_init(&qproc->q6v5, pdev, rproc,
> > > MPSS_CRASH_REASON_SMEM,
> > >  			     qcom_msa_handover);
> > > @@ -1808,6 +1833,7 @@ static const struct rproc_hexagon_res
> > > sc7180_mss = {
> > >  	},
> > >  	.need_mem_protection = true,
> > >  	.has_alt_reset = false,
> > > +	.has_mba_logs = true,
> > >  	.has_spare_reg = true,
> > >  	.version = MSS_SC7180,
> > >  };
> > > @@ -1843,6 +1869,7 @@ static const struct rproc_hexagon_res
> > > sdm845_mss = {
> > >  	},
> > >  	.need_mem_protection = true,
> > >  	.has_alt_reset = true,
> > > +	.has_mba_logs = true,
> > >  	.has_spare_reg = false,
> > >  	.version = MSS_SDM845,
> > >  };
> > > @@ -1870,6 +1897,7 @@ static const struct rproc_hexagon_res
> > > msm8998_mss = {
> > >  	},
> > >  	.need_mem_protection = true,
> > >  	.has_alt_reset = false,
> > > +	.has_mba_logs = false,
> > >  	.has_spare_reg = false,
> > >  	.version = MSS_MSM8998,
> > >  };
> > > @@ -1900,6 +1928,7 @@ static const struct rproc_hexagon_res
> > > msm8996_mss = {
> > >  	},
> > >  	.need_mem_protection = true,
> > >  	.has_alt_reset = false,
> > > +	.has_mba_logs = false,
> > >  	.has_spare_reg = false,
> > >  	.version = MSS_MSM8996,
> > >  };
> > > @@ -1933,6 +1962,7 @@ static const struct rproc_hexagon_res
> > > msm8916_mss = {
> > >  	},
> > >  	.need_mem_protection = false,
> > >  	.has_alt_reset = false,
> > > +	.has_mba_logs = false,
> > >  	.has_spare_reg = false,
> > >  	.version = MSS_MSM8916,
> > >  };
> > > @@ -1974,6 +2004,7 @@ static const struct rproc_hexagon_res
> > > msm8974_mss = {
> > >  	},
> > >  	.need_mem_protection = false,
> > >  	.has_alt_reset = false,
> > > +	.has_mba_logs = false,
> > >  	.has_spare_reg = false,
> > >  	.version = MSS_MSM8974,
> > >  };
> > > --
> > > The Qualcomm Innovation Center, Inc. is a member of the Code Aurora
> > > Forum,
> > > a Linux Foundation Collaborative Project
> > > 
> 
> -- 
> Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum,
> a Linux Foundation Collaborative Project.

[PATCH 3/3] remoteproc: qcom_q6v5_mss: Update MBA log info

[Sibi Sankar]

Update MBA text logs location/size in IMEM to aid tools extract
them after ramdump collection.

Signed-off-by: Sibi Sankar <sibis@codeaurora.org>
---
 drivers/remoteproc/qcom_q6v5_mss.c | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/drivers/remoteproc/qcom_q6v5_mss.c b/drivers/remoteproc/qcom_q6v5_mss.c
index 4ddf084b2c6fc..539594ab955f1 100644
--- a/drivers/remoteproc/qcom_q6v5_mss.c
+++ b/drivers/remoteproc/qcom_q6v5_mss.c
@@ -932,6 +932,9 @@ static int q6v5_mba_load(struct q6v5 *qproc)
 	if (ret)
 		goto reclaim_mba;
 
+	if (qproc->has_mba_logs)
+		qcom_pil_info_store("mba", qproc->mba_phys, MBA_LOG_SIZE);
+
 	ret = q6v5_rmb_mba_wait(qproc, 0, 5000);
 	if (ret == -ETIMEDOUT) {
 		dev_err(qproc->dev, "MBA boot timed out\n");
-- 
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
a Linux Foundation Collaborative Project

Re: [PATCH 3/3] remoteproc: qcom_q6v5_mss: Update MBA log info

[Bjorn Andersson]

On Thu 16 Jul 05:36 PDT 2020, Sibi Sankar wrote:

> Update MBA text logs location/size in IMEM to aid tools extract
> them after ramdump collection.
> 
> Signed-off-by: Sibi Sankar <sibis@codeaurora.org>
> ---
>  drivers/remoteproc/qcom_q6v5_mss.c | 3 +++
>  1 file changed, 3 insertions(+)
> 
> diff --git a/drivers/remoteproc/qcom_q6v5_mss.c b/drivers/remoteproc/qcom_q6v5_mss.c
> index 4ddf084b2c6fc..539594ab955f1 100644
> --- a/drivers/remoteproc/qcom_q6v5_mss.c
> +++ b/drivers/remoteproc/qcom_q6v5_mss.c
> @@ -932,6 +932,9 @@ static int q6v5_mba_load(struct q6v5 *qproc)
>  	if (ret)
>  		goto reclaim_mba;
>  
> +	if (qproc->has_mba_logs)
> +		qcom_pil_info_store("mba", qproc->mba_phys, MBA_LOG_SIZE);

Is there a reason why we don't unconditionally write this to the PIL
info? And why it shouldn't be mba_size?

Regards,
Bjorn

> +
>  	ret = q6v5_rmb_mba_wait(qproc, 0, 5000);
>  	if (ret == -ETIMEDOUT) {
>  		dev_err(qproc->dev, "MBA boot timed out\n");
> -- 
> The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
> a Linux Foundation Collaborative Project
> 

Re: [PATCH 3/3] remoteproc: qcom_q6v5_mss: Update MBA log info

[Sibi Sankar]

On 2020-07-17 10:29, Bjorn Andersson wrote:
> On Thu 16 Jul 05:36 PDT 2020, Sibi Sankar wrote:
> 
>> Update MBA text logs location/size in IMEM to aid tools extract
>> them after ramdump collection.
>> 
>> Signed-off-by: Sibi Sankar <sibis@codeaurora.org>
>> ---
>>  drivers/remoteproc/qcom_q6v5_mss.c | 3 +++
>>  1 file changed, 3 insertions(+)
>> 
>> diff --git a/drivers/remoteproc/qcom_q6v5_mss.c 
>> b/drivers/remoteproc/qcom_q6v5_mss.c
>> index 4ddf084b2c6fc..539594ab955f1 100644
>> --- a/drivers/remoteproc/qcom_q6v5_mss.c
>> +++ b/drivers/remoteproc/qcom_q6v5_mss.c
>> @@ -932,6 +932,9 @@ static int q6v5_mba_load(struct q6v5 *qproc)
>>  	if (ret)
>>  		goto reclaim_mba;
>> 
>> +	if (qproc->has_mba_logs)
>> +		qcom_pil_info_store("mba", qproc->mba_phys, MBA_LOG_SIZE);
> 
> Is there a reason why we don't unconditionally write this to the PIL
> info? And why it shouldn't be mba_size?

MBA text logs of size specified are the
only things extracted from MBA region by
the postmortem tools (the tool assumes
that the entire region is text). The MBA
log feature was only added to SC7180 MSS
firmware.

> 
> Regards,
> Bjorn
> 
>> +
>>  	ret = q6v5_rmb_mba_wait(qproc, 0, 5000);
>>  	if (ret == -ETIMEDOUT) {
>>  		dev_err(qproc->dev, "MBA boot timed out\n");
>> --
>> The Qualcomm Innovation Center, Inc. is a member of the Code Aurora 
>> Forum,
>> a Linux Foundation Collaborative Project
>> 

-- 
Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum,
a Linux Foundation Collaborative Project.