[PATCH 15/18] arm: dts: k3-j7200: Add dts support

[Lokesh Vutla <lokeshvutla@ti.com>]

Add the basic r5 and a72 basic dts for j7200. Following nodes were
supported:
- UART
- MMC SD
- I2C
- TISCI communication

Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
Signed-off-by: Vishal Mahaveer <vishalm@ti.com>
Signed-off-by: Faiz Abbas <faiz_abbas@ti.com>
---
 arch/arm/dts/Makefile                         |   4 +-
 .../k3-j7200-common-proc-board-u-boot.dtsi    |  92 +++++
 arch/arm/dts/k3-j7200-common-proc-board.dts   |  94 ++++++
 arch/arm/dts/k3-j7200-main.dtsi               | 313 ++++++++++++++++++
 arch/arm/dts/k3-j7200-mcu-wakeup.dtsi         | 117 +++++++
 .../arm/dts/k3-j7200-r5-common-proc-board.dts | 191 +++++++++++
 arch/arm/dts/k3-j7200-som-p0.dtsi             |  29 ++
 arch/arm/dts/k3-j7200.dtsi                    | 175 ++++++++++
 8 files changed, 1014 insertions(+), 1 deletion(-)
 create mode 100644 arch/arm/dts/k3-j7200-common-proc-board-u-boot.dtsi
 create mode 100644 arch/arm/dts/k3-j7200-common-proc-board.dts
 create mode 100644 arch/arm/dts/k3-j7200-main.dtsi
 create mode 100644 arch/arm/dts/k3-j7200-mcu-wakeup.dtsi
 create mode 100644 arch/arm/dts/k3-j7200-r5-common-proc-board.dts
 create mode 100644 arch/arm/dts/k3-j7200-som-p0.dtsi
 create mode 100644 arch/arm/dts/k3-j7200.dtsi

diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile
index cee10f533f..cdca20206f 100644
--- a/arch/arm/dts/Makefile
+++ b/arch/arm/dts/Makefile
@@ -938,7 +938,9 @@ dtb-$(CONFIG_STM32MP15x) += \
 
 dtb-$(CONFIG_SOC_K3_AM6) += k3-am654-base-board.dtb k3-am654-r5-base-board.dtb
 dtb-$(CONFIG_SOC_K3_J721E) += k3-j721e-common-proc-board.dtb \
-			      k3-j721e-r5-common-proc-board.dtb
+			      k3-j721e-r5-common-proc-board.dtb \
+			      k3-j7200-common-proc-board.dtb \
+			      k3-j7200-r5-common-proc-board.dtb
 
 dtb-$(CONFIG_ARCH_MEDIATEK) += \
 	mt7622-rfb.dtb \
diff --git a/arch/arm/dts/k3-j7200-common-proc-board-u-boot.dtsi b/arch/arm/dts/k3-j7200-common-proc-board-u-boot.dtsi
new file mode 100644
index 0000000000..2429d8c359
--- /dev/null
+++ b/arch/arm/dts/k3-j7200-common-proc-board-u-boot.dtsi
@@ -0,0 +1,92 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2020 Texas Instruments Incorporated - https://www.ti.com/
+ */
+
+/ {
+	chosen {
+		stdout-path = "serial2:115200n8";
+		tick-timer = &timer1;
+	};
+
+};
+
+&chipid {
+	u-boot,dm-spl;
+};
+
+&cbass_main {
+	u-boot,dm-spl;
+};
+
+&main_navss {
+	u-boot,dm-spl;
+};
+
+&cbass_mcu_wakeup {
+	u-boot,dm-spl;
+
+	timer1: timer at 40400000 {
+		compatible = "ti,omap5430-timer";
+		reg = <0x0 0x40400000 0x0 0x80>;
+		ti,timer-alwon;
+		clock-frequency = <25000000>;
+		u-boot,dm-spl;
+	};
+};
+
+&secure_proxy_main {
+	u-boot,dm-spl;
+};
+
+&dmsc {
+	u-boot,dm-spl;
+	k3_sysreset: sysreset-controller {
+		compatible = "ti,sci-sysreset";
+		u-boot,dm-spl;
+	};
+};
+
+&k3_pds {
+	u-boot,dm-spl;
+};
+
+&k3_clks {
+	u-boot,dm-spl;
+};
+
+&k3_reset {
+	u-boot,dm-spl;
+};
+
+&wkup_pmx0 {
+	u-boot,dm-spl;
+};
+
+&main_pmx0 {
+	u-boot,dm-spl;
+};
+
+&main_uart0 {
+	u-boot,dm-spl;
+};
+
+&mcu_uart0 {
+	u-boot,dm-spl;
+};
+
+&main_sdhci0 {
+	u-boot,dm-spl;
+};
+
+&main_sdhci1 {
+	u-boot,dm-spl;
+};
+
+&wkup_i2c0_pins_default {
+	u-boot,dm-spl;
+};
+
+&wkup_i2c0 {
+	u-boot,dm-spl;
+};
diff --git a/arch/arm/dts/k3-j7200-common-proc-board.dts b/arch/arm/dts/k3-j7200-common-proc-board.dts
new file mode 100644
index 0000000000..3f33fb5650
--- /dev/null
+++ b/arch/arm/dts/k3-j7200-common-proc-board.dts
@@ -0,0 +1,94 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2020 Texas Instruments Incorporated - https://www.ti.com/
+ */
+
+/dts-v1/;
+
+#include "k3-j7200-som-p0.dtsi"
+
+/ {
+	chosen {
+		stdout-path = "serial2:115200n8";
+		bootargs = "console=ttyS2,115200n8 earlycon=ns16550a,mmio32,0x02800000";
+	};
+};
+
+&wkup_pmx0 {
+	wkup_i2c0_pins_default: wkup-i2c0-pins-default {
+		pinctrl-single,pins = <
+			J721E_WKUP_IOPAD(0x100, PIN_INPUT_PULLUP, 0) /* (F20) WKUP_I2C0_SCL */
+			J721E_WKUP_IOPAD(0x104, PIN_INPUT_PULLUP, 0) /* (H21) WKUP_I2C0_SDA */
+		>;
+	};
+};
+
+&wkup_uart0 {
+	/* Wakeup UART is used by System firmware */
+	status = "disabled";
+};
+
+&main_uart0 {
+	power-domains = <&k3_pds 146 TI_SCI_PD_SHARED>;
+};
+
+&main_uart2 {
+	/* MAIN UART 2 is used by R5F firmware */
+	status = "disabled";
+};
+
+&main_uart3 {
+	/* UART not brought out */
+	status = "disabled";
+};
+
+&main_uart4 {
+	/* UART not brought out */
+	status = "disabled";
+};
+
+&main_uart5 {
+	/* UART not brought out */
+	status = "disabled";
+};
+
+&main_uart6 {
+	/* UART not brought out */
+	status = "disabled";
+};
+
+&main_uart7 {
+	/* UART not brought out */
+	status = "disabled";
+};
+
+&main_uart8 {
+	/* UART not brought out */
+	status = "disabled";
+};
+
+&main_uart9 {
+	/* UART not brought out */
+	status = "disabled";
+};
+
+&wkup_i2c0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&wkup_i2c0_pins_default>;
+	clock-frequency = <400000>;
+};
+
+&main_sdhci0 {
+	/* eMMC */
+	non-removable;
+	ti,driver-strength-ohm = <50>;
+	disable-wp;
+};
+
+&main_sdhci1 {
+	/* SD card */
+	ti,driver-strength-ohm = <50>;
+	disable-wp;
+	no-1-8-v;
+	sdhci-caps-mask = <0x8000000F 0x0>;
+};
diff --git a/arch/arm/dts/k3-j7200-main.dtsi b/arch/arm/dts/k3-j7200-main.dtsi
new file mode 100644
index 0000000000..62b1f9dc35
--- /dev/null
+++ b/arch/arm/dts/k3-j7200-main.dtsi
@@ -0,0 +1,313 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Device Tree Source for J7200 SoC Family Main Domain peripherals
+ *
+ * Copyright (C) 2020 Texas Instruments Incorporated - https://www.ti.com/
+ */
+
+&cbass_main {
+	msmc_ram: sram at 70000000 {
+		compatible = "mmio-sram";
+		reg = <0x0 0x70000000 0x0 0x100000>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0x0 0x0 0x70000000 0x100000>;
+
+		atf-sram at 0 {
+			reg = <0x0 0x20000>;
+		};
+	};
+
+	gic500: interrupt-controller at 1800000 {
+		compatible = "arm,gic-v3";
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+		#interrupt-cells = <3>;
+		interrupt-controller;
+		reg = <0x00 0x01800000 0x00 0x10000>,	/* GICD */
+		      <0x00 0x01900000 0x00 0x100000>;	/* GICR */
+
+		/* vcpumntirq: virtual CPU interface maintenance interrupt */
+		interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>;
+
+		gic_its: msi-controller at 1820000 {
+			compatible = "arm,gic-v3-its";
+			reg = <0x00 0x01820000 0x00 0x10000>;
+			socionext,synquacer-pre-its = <0x1000000 0x400000>;
+			msi-controller;
+			#msi-cells = <1>;
+		};
+	};
+
+	main_navss: navss at 30000000 {
+		compatible = "simple-mfd";
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges = <0x00 0x30000000 0x00 0x30000000 0x00 0x0c400000>;
+
+		secure_proxy_main: mailbox at 32c00000 {
+			compatible = "ti,am654-secure-proxy";
+			#mbox-cells = <1>;
+			reg-names = "target_data", "rt", "scfg";
+			reg = <0x00 0x32c00000 0x00 0x100000>,
+			      <0x00 0x32400000 0x00 0x100000>,
+			      <0x00 0x32800000 0x00 0x100000>;
+			interrupt-names = "rx_011";
+			interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
+		};
+	};
+
+	main_pmx0: pinmux at 11c000 {
+		compatible = "pinctrl-single";
+		/* Proxy 0 addressing */
+		reg = <0x0 0x11c000 0x0 0x2b4>;
+		#pinctrl-cells = <1>;
+		pinctrl-single,register-width = <32>;
+		pinctrl-single,function-mask = <0xffffffff>;
+	};
+
+	main_uart0: serial at 2800000 {
+		compatible = "ti,j721e-uart", "ti,am654-uart";
+		reg = <0x00 0x02800000 0x00 0x100>;
+		reg-shift = <2>;
+		reg-io-width = <4>;
+		interrupts = <GIC_SPI 192 IRQ_TYPE_LEVEL_HIGH>;
+		clock-frequency = <48000000>;
+		current-speed = <115200>;
+		power-domains = <&k3_pds 146 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 146 2>;
+		clock-names = "fclk";
+	};
+
+	main_uart1: serial at 2810000 {
+		compatible = "ti,j721e-uart", "ti,am654-uart";
+		reg = <0x00 0x02810000 0x00 0x100>;
+		reg-shift = <2>;
+		reg-io-width = <4>;
+		interrupts = <GIC_SPI 193 IRQ_TYPE_LEVEL_HIGH>;
+		clock-frequency = <48000000>;
+		current-speed = <115200>;
+		power-domains = <&k3_pds 278 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 278 2>;
+		clock-names = "fclk";
+	};
+
+	main_uart2: serial at 2820000 {
+		compatible = "ti,j721e-uart", "ti,am654-uart";
+		reg = <0x00 0x02820000 0x00 0x100>;
+		reg-shift = <2>;
+		reg-io-width = <4>;
+		interrupts = <GIC_SPI 194 IRQ_TYPE_LEVEL_HIGH>;
+		clock-frequency = <48000000>;
+		current-speed = <115200>;
+		power-domains = <&k3_pds 279 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 279 2>;
+		clock-names = "fclk";
+	};
+
+	main_uart3: serial at 2830000 {
+		compatible = "ti,j721e-uart", "ti,am654-uart";
+		reg = <0x00 0x02830000 0x00 0x100>;
+		reg-shift = <2>;
+		reg-io-width = <4>;
+		interrupts = <GIC_SPI 195 IRQ_TYPE_LEVEL_HIGH>;
+		clock-frequency = <48000000>;
+		current-speed = <115200>;
+		power-domains = <&k3_pds 280 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 280 2>;
+		clock-names = "fclk";
+	};
+
+	main_uart4: serial at 2840000 {
+		compatible = "ti,j721e-uart", "ti,am654-uart";
+		reg = <0x00 0x02840000 0x00 0x100>;
+		reg-shift = <2>;
+		reg-io-width = <4>;
+		interrupts = <GIC_SPI 196 IRQ_TYPE_LEVEL_HIGH>;
+		clock-frequency = <48000000>;
+		current-speed = <115200>;
+		power-domains = <&k3_pds 281 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 281 2>;
+		clock-names = "fclk";
+	};
+
+	main_uart5: serial at 2850000 {
+		compatible = "ti,j721e-uart", "ti,am654-uart";
+		reg = <0x00 0x02850000 0x00 0x100>;
+		reg-shift = <2>;
+		reg-io-width = <4>;
+		interrupts = <GIC_SPI 197 IRQ_TYPE_LEVEL_HIGH>;
+		clock-frequency = <48000000>;
+		current-speed = <115200>;
+		power-domains = <&k3_pds 282 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 282 2>;
+		clock-names = "fclk";
+	};
+
+	main_uart6: serial at 2860000 {
+		compatible = "ti,j721e-uart", "ti,am654-uart";
+		reg = <0x00 0x02860000 0x00 0x100>;
+		reg-shift = <2>;
+		reg-io-width = <4>;
+		interrupts = <GIC_SPI 198 IRQ_TYPE_LEVEL_HIGH>;
+		clock-frequency = <48000000>;
+		current-speed = <115200>;
+		power-domains = <&k3_pds 283 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 283 2>;
+		clock-names = "fclk";
+	};
+
+	main_uart7: serial at 2870000 {
+		compatible = "ti,j721e-uart", "ti,am654-uart";
+		reg = <0x00 0x02870000 0x00 0x100>;
+		reg-shift = <2>;
+		reg-io-width = <4>;
+		interrupts = <GIC_SPI 199 IRQ_TYPE_LEVEL_HIGH>;
+		clock-frequency = <48000000>;
+		current-speed = <115200>;
+		power-domains = <&k3_pds 284 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 284 2>;
+		clock-names = "fclk";
+	};
+
+	main_uart8: serial at 2880000 {
+		compatible = "ti,j721e-uart", "ti,am654-uart";
+		reg = <0x00 0x02880000 0x00 0x100>;
+		reg-shift = <2>;
+		reg-io-width = <4>;
+		interrupts = <GIC_SPI 248 IRQ_TYPE_LEVEL_HIGH>;
+		clock-frequency = <48000000>;
+		current-speed = <115200>;
+		power-domains = <&k3_pds 285 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 285 2>;
+		clock-names = "fclk";
+	};
+
+	main_uart9: serial at 2890000 {
+		compatible = "ti,j721e-uart", "ti,am654-uart";
+		reg = <0x00 0x02890000 0x00 0x100>;
+		reg-shift = <2>;
+		reg-io-width = <4>;
+		interrupts = <GIC_SPI 249 IRQ_TYPE_LEVEL_HIGH>;
+		clock-frequency = <48000000>;
+		current-speed = <115200>;
+		power-domains = <&k3_pds 286 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 286 2>;
+		clock-names = "fclk";
+	};
+
+	main_sdhci0: sdhci at 4f8000 {
+		compatible = "ti,j7200-sdhci-8bit";
+		reg = <0x0 0x04f80000 0x0 0x260>, <0x0 0x4f88000 0x0 0x134>;
+		interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>;
+		power-domains = <&k3_pds 91 TI_SCI_PD_EXCLUSIVE>;
+		clock-names = "clk_xin", "clk_ahb";
+		clocks = <&k3_clks 91 3>, <&k3_clks 91 0>;
+		ti,otap-del-sel-legacy = <0x0>;
+		ti,otap-del-sel-mmc-hs = <0x0>;
+		ti,otap-del-sel-ddr52 = <0x6>;
+		ti,otap-del-sel-hs200 = <0x8>;
+		ti,otap-del-sel-hs400 = <0x0>;
+		ti,strobe-sel = <0x77>;
+		ti,trm-icp = <0x8>;
+		bus-width = <8>;
+		mmc-hs200-1_8v;
+		mmc-ddr-1_8v;
+		dma-coherent;
+	};
+
+	main_sdhci1: sdhci at 4fb000 {
+		compatible = "ti,j7200-sdhci-4bit";
+		reg = <0x0 0x04fb0000 0x0 0x260>, <0x0 0x4fb8000 0x0 0x134>;
+		interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
+		power-domains = <&k3_pds 92 TI_SCI_PD_EXCLUSIVE>;
+		clock-names = "clk_xin", "clk_ahb";
+		clocks = <&k3_clks 92 2>, <&k3_clks 92 1>;
+		ti,otap-del-sel-legacy = <0x0>;
+		ti,otap-del-sel-sd-hs = <0x0>;
+		ti,otap-del-sel-sdr12 = <0xf>;
+		ti,otap-del-sel-sdr25 = <0xf>;
+		ti,otap-del-sel-sdr50 = <0xc>;
+		ti,otap-del-sel-sdr104 = <0x5>;
+		ti,otap-del-sel-ddr50 = <0xc>;
+		dma-coherent;
+	};
+
+	main_i2c0: i2c at 2000000 {
+		compatible = "ti,j721e-i2c", "ti,omap4-i2c";
+		reg = <0x0 0x2000000 0x0 0x100>;
+		interrupts = <GIC_SPI 200 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		clock-names = "fck";
+		clocks = <&k3_clks 187 1>;
+		power-domains = <&k3_pds 187 TI_SCI_PD_EXCLUSIVE>;
+	};
+
+	main_i2c1: i2c at 2010000 {
+		compatible = "ti,j721e-i2c", "ti,omap4-i2c";
+		reg = <0x0 0x2010000 0x0 0x100>;
+		interrupts = <GIC_SPI 201 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		clock-names = "fck";
+		clocks = <&k3_clks 188 1>;
+		power-domains = <&k3_pds 188 TI_SCI_PD_EXCLUSIVE>;
+	};
+
+	main_i2c2: i2c at 2020000 {
+		compatible = "ti,j721e-i2c", "ti,omap4-i2c";
+		reg = <0x0 0x2020000 0x0 0x100>;
+		interrupts = <GIC_SPI 202 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		clock-names = "fck";
+		clocks = <&k3_clks 189 1>;
+		power-domains = <&k3_pds 189 TI_SCI_PD_EXCLUSIVE>;
+	};
+
+	main_i2c3: i2c at 2030000 {
+		compatible = "ti,j721e-i2c", "ti,omap4-i2c";
+		reg = <0x0 0x2030000 0x0 0x100>;
+		interrupts = <GIC_SPI 203 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		clock-names = "fck";
+		clocks = <&k3_clks 190 1>;
+		power-domains = <&k3_pds 190 TI_SCI_PD_EXCLUSIVE>;
+	};
+
+	main_i2c4: i2c at 2040000 {
+		compatible = "ti,j721e-i2c", "ti,omap4-i2c";
+		reg = <0x0 0x2040000 0x0 0x100>;
+		interrupts = <GIC_SPI 204 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		clock-names = "fck";
+		clocks = <&k3_clks 191 1>;
+		power-domains = <&k3_pds 191 TI_SCI_PD_EXCLUSIVE>;
+	};
+
+	main_i2c5: i2c at 2050000 {
+		compatible = "ti,j721e-i2c", "ti,omap4-i2c";
+		reg = <0x0 0x2050000 0x0 0x100>;
+		interrupts = <GIC_SPI 205 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		clock-names = "fck";
+		clocks = <&k3_clks 192 1>;
+		power-domains = <&k3_pds 192 TI_SCI_PD_EXCLUSIVE>;
+	};
+
+	main_i2c6: i2c at 2060000 {
+		compatible = "ti,j721e-i2c", "ti,omap4-i2c";
+		reg = <0x0 0x2060000 0x0 0x100>;
+		interrupts = <GIC_SPI 206 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		clock-names = "fck";
+		clocks = <&k3_clks 193 1>;
+		power-domains = <&k3_pds 193 TI_SCI_PD_EXCLUSIVE>;
+	};
+};
diff --git a/arch/arm/dts/k3-j7200-mcu-wakeup.dtsi b/arch/arm/dts/k3-j7200-mcu-wakeup.dtsi
new file mode 100644
index 0000000000..4bcb65aace
--- /dev/null
+++ b/arch/arm/dts/k3-j7200-mcu-wakeup.dtsi
@@ -0,0 +1,117 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Device Tree Source for J7200 SoC Family MCU/WAKEUP Domain peripherals
+ *
+ * Copyright (C) 2020 Texas Instruments Incorporated - https://www.ti.com/
+ */
+
+&cbass_mcu_wakeup {
+	dmsc: dmsc at 44083000 {
+		compatible = "ti,k2g-sci";
+		ti,host-id = <12>;
+
+		mbox-names = "rx", "tx";
+
+		mboxes= <&secure_proxy_main 11>,
+			<&secure_proxy_main 13>;
+
+		reg-names = "debug_messages";
+		reg = <0x00 0x44083000 0x0 0x1000>;
+
+		k3_pds: power-controller {
+			compatible = "ti,sci-pm-domain";
+			#power-domain-cells = <2>;
+		};
+
+		k3_clks: clocks {
+			compatible = "ti,k2g-sci-clk";
+			#clock-cells = <2>;
+		};
+
+		k3_reset: reset-controller {
+			compatible = "ti,sci-reset";
+			#reset-cells = <2>;
+		};
+	};
+
+	chipid: chipid at 43000014 {
+		compatible = "ti,am654-chipid";
+		reg = <0x0 0x43000014 0x0 0x4>;
+	};
+
+	wkup_pmx0: pinmux at 4301c000 {
+		compatible = "pinctrl-single";
+		/* Proxy 0 addressing */
+		reg = <0x00 0x4301c000 0x00 0x178>;
+		#pinctrl-cells = <1>;
+		pinctrl-single,register-width = <32>;
+		pinctrl-single,function-mask = <0xffffffff>;
+	};
+
+	mcu_ram: sram at 41c00000 {
+		compatible = "mmio-sram";
+		reg = <0x00 0x41c00000 0x00 0x100000>;
+		ranges = <0x0 0x00 0x41c00000 0x100000>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+	};
+
+	wkup_uart0: serial at 42300000 {
+		compatible = "ti,j721e-uart", "ti,am654-uart";
+		reg = <0x00 0x42300000 0x00 0x100>;
+		reg-shift = <2>;
+		reg-io-width = <4>;
+		interrupts = <GIC_SPI 897 IRQ_TYPE_LEVEL_HIGH>;
+		clock-frequency = <48000000>;
+		current-speed = <115200>;
+		power-domains = <&k3_pds 287 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 287 2>;
+		clock-names = "fclk";
+	};
+
+	wkup_i2c0: i2c at 42120000 {
+		compatible = "ti,j721e-i2c", "ti,omap4-i2c";
+		reg = <0x0 0x42120000 0x0 0x100>;
+		interrupts = <GIC_SPI 896 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		clock-names = "fck";
+		clocks = <&k3_clks 197 1>;
+		power-domains = <&k3_pds 197 TI_SCI_PD_EXCLUSIVE>;
+	};
+
+	mcu_uart0: serial at 40a00000 {
+		compatible = "ti,j721e-uart", "ti,am654-uart";
+		reg = <0x00 0x40a00000 0x00 0x100>;
+		reg-shift = <2>;
+		reg-io-width = <4>;
+		interrupts = <GIC_SPI 846 IRQ_TYPE_LEVEL_HIGH>;
+		clock-frequency = <96000000>;
+		current-speed = <115200>;
+		power-domains = <&k3_pds 149 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 149 2>;
+		clock-names = "fclk";
+	};
+
+	mcu_i2c0: i2c at 40b00000 {
+		compatible = "ti,j721e-i2c", "ti,omap4-i2c";
+		reg = <0x0 0x40b00000 0x0 0x100>;
+		interrupts = <GIC_SPI 852 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		clock-names = "fck";
+		clocks = <&k3_clks 194 1>;
+		power-domains = <&k3_pds 194 TI_SCI_PD_EXCLUSIVE>;
+	};
+
+	mcu_i2c1: i2c at 40b10000 {
+		compatible = "ti,j721e-i2c", "ti,omap4-i2c";
+		reg = <0x0 0x40b10000 0x0 0x100>;
+		interrupts = <GIC_SPI 853 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		clock-names = "fck";
+		clocks = <&k3_clks 195 1>;
+		power-domains = <&k3_pds 195 TI_SCI_PD_EXCLUSIVE>;
+	};
+};
diff --git a/arch/arm/dts/k3-j7200-r5-common-proc-board.dts b/arch/arm/dts/k3-j7200-r5-common-proc-board.dts
new file mode 100644
index 0000000000..c63b128a05
--- /dev/null
+++ b/arch/arm/dts/k3-j7200-r5-common-proc-board.dts
@@ -0,0 +1,191 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2020 Texas Instruments Incorporated - https://www.ti.com/
+ */
+
+/dts-v1/;
+
+#include "k3-j7200-som-p0.dtsi"
+
+/ {
+	aliases {
+		remoteproc0 = &sysctrler;
+		remoteproc1 = &a72_0;
+	};
+
+	chosen {
+		stdout-path = &main_uart0;
+		tick-timer = &timer1;
+	};
+
+	a72_0: a72 at 0 {
+		compatible = "ti,am654-rproc";
+		reg = <0x0 0x00a90000 0x0 0x10>;
+		power-domains = <&k3_pds 61 TI_SCI_PD_EXCLUSIVE>,
+				<&k3_pds 202 TI_SCI_PD_EXCLUSIVE>;
+		resets = <&k3_reset 202 0>;
+		assigned-clocks = <&k3_clks 202 2>, <&k3_clks 61 1>;
+		assigned-clock-rates = <2000000000>, <200000000>;
+		ti,sci = <&dmsc>;
+		ti,sci-proc-id = <32>;
+		ti,sci-host-id = <10>;
+		u-boot,dm-spl;
+	};
+
+	clk_200mhz: dummy_clock_200mhz {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <200000000>;
+		u-boot,dm-spl;
+	};
+
+	clk_19_2mhz: dummy_clock_19_2mhz {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <19200000>;
+		u-boot,dm-spl;
+	};
+};
+
+&cbass_mcu_wakeup {
+	mcu_secproxy: secproxy at 2a380000 {
+		u-boot,dm-spl;
+		compatible = "ti,am654-secure-proxy";
+		reg = <0x0 0x2a380000 0x0 0x80000>,
+		      <0x0 0x2a400000 0x0 0x80000>,
+		      <0x0 0x2a480000 0x0 0x80000>;
+		reg-names = "rt", "scfg", "target_data";
+		#mbox-cells = <1>;
+	};
+
+	sysctrler: sysctrler {
+		u-boot,dm-spl;
+		compatible = "ti,am654-system-controller";
+		mboxes= <&mcu_secproxy 4>, <&mcu_secproxy 5>;
+		mbox-names = "tx", "rx";
+	};
+};
+
+&dmsc {
+	mboxes= <&mcu_secproxy 8>, <&mcu_secproxy 6>, <&mcu_secproxy 5>;
+	mbox-names = "tx", "rx", "notify";
+	ti,host-id = <4>;
+	ti,secure-host;
+};
+
+&wkup_pmx0 {
+	u-boot,dm-spl;
+	wkup_uart0_pins_default: wkup_uart0_pins_default {
+		u-boot,dm-spl;
+		pinctrl-single,pins = <
+			J721E_WKUP_IOPAD(0xb0, PIN_INPUT, 0) /* (B14) WKUP_UART0_RXD */
+			J721E_WKUP_IOPAD(0xb4, PIN_OUTPUT, 0) /* (A14) WKUP_UART0_TXD */
+		>;
+	};
+
+	mcu_uart0_pins_default: mcu_uart0_pins_default {
+		u-boot,dm-spl;
+		pinctrl-single,pins = <
+			J721E_WKUP_IOPAD(0xf4, PIN_INPUT, 0) /* (D20) WKUP_GPIO0_13.MCU_UART0_RXD */
+			J721E_WKUP_IOPAD(0xf0, PIN_OUTPUT, 0) /* (D19) WKUP_GPIO0_12.MCU_UART0_TXD */
+			J721E_WKUP_IOPAD(0xf8, PIN_INPUT, 0) /* (E20) WKUP_GPIO0_14.MCU_UART0_CTSn */
+			J721E_WKUP_IOPAD(0xfc, PIN_OUTPUT, 0) /* (E21) WKUP_GPIO0_15.MCU_UART0_RTSn */
+		>;
+	};
+
+	wkup_i2c0_pins_default: wkup-i2c0-pins-default {
+		pinctrl-single,pins = <
+			J721E_WKUP_IOPAD(0x100, PIN_INPUT_PULLUP, 0) /* (F20) WKUP_I2C0_SCL */
+			J721E_WKUP_IOPAD(0x104, PIN_INPUT_PULLUP, 0) /* (H21) WKUP_I2C0_SDA */
+		>;
+	};
+};
+
+&main_pmx0 {
+	u-boot,dm-spl;
+
+	main_uart0_pins_default: main_uart0_pins_default {
+		u-boot,dm-spl;
+		pinctrl-single,pins = <
+			J721E_IOPAD(0xb0, PIN_INPUT, 0) /* (T16) UART0_RXD */
+			J721E_IOPAD(0xb4, PIN_OUTPUT, 0) /* (T17) UART0_TXD */
+			J721E_IOPAD(0xc0, PIN_INPUT, 2) /* (W3) SPI0_CS0.UART0_CTSn */
+			J721E_IOPAD(0xc4, PIN_OUTPUT, 2) /* (U5) SPI0_CS1.UART0_RTSn */
+		>;
+	};
+
+	main_i2c0_pins_default: main-i2c0-pins-default {
+		u-boot,dm-spl;
+		pinctrl-single,pins = <
+			J721E_IOPAD(0xd4, PIN_INPUT_PULLUP, 0) /* (V3) I2C0_SCL */
+			J721E_IOPAD(0xd8, PIN_INPUT_PULLUP, 0) /* (W2) I2C0_SDA */
+		>;
+	};
+};
+
+&wkup_uart0 {
+	u-boot,dm-spl;
+	pinctrl-names = "default";
+	pinctrl-0 = <&wkup_uart0_pins_default>;
+	status = "okay";
+};
+
+&mcu_uart0 {
+	/delete-property/ power-domains;
+	/delete-property/ clocks;
+	/delete-property/ clock-names;
+	pinctrl-names = "default";
+	pinctrl-0 = <&mcu_uart0_pins_default>;
+	status = "okay";
+	clock-frequency = <96000000>;
+};
+
+&main_uart0 {
+	status = "okay";
+	power-domains = <&k3_pds 146 TI_SCI_PD_SHARED>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&main_uart0_pins_default>;
+	status = "okay";
+};
+
+&main_sdhci0 {
+	/delete-property/ power-domains;
+	/delete-property/ assigned-clocks;
+	/delete-property/ assigned-clock-parents;
+	clock-names = "clk_xin";
+	clocks = <&clk_200mhz>;
+	ti,driver-strength-ohm = <50>;
+	non-removable;
+	bus-width = <8>;
+};
+
+&main_sdhci1 {
+	/delete-property/ power-domains;
+	/delete-property/ assigned-clocks;
+	/delete-property/ assigned-clock-parents;
+	clock-names = "clk_xin";
+	clocks = <&clk_200mhz>;
+	ti,driver-strength-ohm = <50>;
+};
+
+&main_i2c0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&main_i2c0_pins_default>;
+	clock-frequency = <400000>;
+
+	exp1: gpio at 20 {
+		compatible = "ti,tca6416";
+		reg = <0x20>;
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+
+	exp2: gpio at 22 {
+		compatible = "ti,tca6424";
+		reg = <0x22>;
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+};
+
+#include "k3-j7200-common-proc-board-u-boot.dtsi"
diff --git a/arch/arm/dts/k3-j7200-som-p0.dtsi b/arch/arm/dts/k3-j7200-som-p0.dtsi
new file mode 100644
index 0000000000..22fc50bd5c
--- /dev/null
+++ b/arch/arm/dts/k3-j7200-som-p0.dtsi
@@ -0,0 +1,29 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2020 Texas Instruments Incorporated - https://www.ti.com/
+ */
+
+/dts-v1/;
+
+#include "k3-j7200.dtsi"
+
+/ {
+	memory at 80000000 {
+		device_type = "memory";
+		/* 4G RAM */
+		reg = <0x00000000 0x80000000 0x00000000 0x80000000>,
+		      <0x00000008 0x80000000 0x00000000 0x80000000>;
+	};
+
+	reserved_memory: reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		secure_ddr: optee at 9e800000 {
+			reg = <0x00 0x9e800000 0x00 0x01800000>;
+			alignment = <0x1000>;
+			no-map;
+		};
+	};
+};
diff --git a/arch/arm/dts/k3-j7200.dtsi b/arch/arm/dts/k3-j7200.dtsi
new file mode 100644
index 0000000000..7b2313dcab
--- /dev/null
+++ b/arch/arm/dts/k3-j7200.dtsi
@@ -0,0 +1,175 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Device Tree Source for J7200 SoC Family
+ *
+ * Copyright (C) 2020 Texas Instruments Incorporated - https://www.ti.com/
+ */
+
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/pinctrl/k3.h>
+#include <dt-bindings/soc/ti,sci_pm_domain.h>
+
+/ {
+	model = "Texas Instruments K3 J7200 SoC";
+	compatible = "ti,j7200";
+	interrupt-parent = <&gic500>;
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	aliases {
+		serial0 = &wkup_uart0;
+		serial1 = &mcu_uart0;
+		serial2 = &main_uart0;
+		serial3 = &main_uart1;
+		serial4 = &main_uart2;
+		serial5 = &main_uart3;
+		serial6 = &main_uart4;
+		serial7 = &main_uart5;
+		serial8 = &main_uart6;
+		serial9 = &main_uart7;
+		serial10 = &main_uart8;
+		serial11 = &main_uart9;
+		i2c0 = &wkup_i2c0;
+		i2c1 = &mcu_i2c0;
+		i2c2 = &mcu_i2c1;
+		i2c3 = &main_i2c0;
+		i2c4 = &main_i2c1;
+		i2c5 = &main_i2c2;
+		i2c6 = &main_i2c3;
+		i2c7 = &main_i2c4;
+		i2c8 = &main_i2c5;
+		i2c9 = &main_i2c6;
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		cpu-map {
+			cluster0: cluster0 {
+				core0 {
+					cpu = <&cpu0>;
+				};
+
+				core1 {
+					cpu = <&cpu1>;
+				};
+			};
+
+		};
+
+		cpu0: cpu at 0 {
+			compatible = "arm,cortex-a72";
+			reg = <0x000>;
+			device_type = "cpu";
+			enable-method = "psci";
+			i-cache-size = <0xC000>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <256>;
+			d-cache-size = <0x8000>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <128>;
+			next-level-cache = <&L2_0>;
+		};
+
+		cpu1: cpu at 1 {
+			compatible = "arm,cortex-a72";
+			reg = <0x001>;
+			device_type = "cpu";
+			enable-method = "psci";
+			i-cache-size = <0xC000>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <256>;
+			d-cache-size = <0x8000>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <128>;
+			next-level-cache = <&L2_0>;
+		};
+	};
+
+	L2_0: l2-cache0 {
+		compatible = "cache";
+		cache-level = <2>;
+		cache-size = <0x100000>;
+		cache-line-size = <64>;
+		cache-sets = <2048>;
+		next-level-cache = <&msmc_l3>;
+	};
+
+	msmc_l3: l3-cache0 {
+		compatible = "cache";
+		cache-level = <3>;
+	};
+
+	firmware {
+		optee {
+			compatible = "linaro,optee-tz";
+			method = "smc";
+		};
+
+		psci: psci {
+			compatible = "arm,psci-1.0";
+			method = "smc";
+		};
+	};
+
+	a72_timer0: timer-cl0-cpu0 {
+		compatible = "arm,armv8-timer";
+		interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_LOW>, /* cntpsirq */
+			     <GIC_PPI 14 IRQ_TYPE_LEVEL_LOW>, /* cntpnsirq */
+			     <GIC_PPI 11 IRQ_TYPE_LEVEL_LOW>, /* cntvirq */
+			     <GIC_PPI 10 IRQ_TYPE_LEVEL_LOW>; /* cnthpirq */
+	};
+
+	pmu: pmu {
+		compatible = "arm,armv8-pmuv3";
+		interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_HIGH>;
+	};
+
+	cbass_main: bus at 100000 {
+		compatible = "simple-bus";
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges = <0x00 0x00100000 0x00 0x00100000 0x00 0x00020000>, /* ctrl mmr */
+			 <0x00 0x00600000 0x00 0x00600000 0x00 0x00031100>, /* GPIO */
+			 <0x00 0x00A40000 0x00 0x00A40000 0x00 0x00000800>, /* timesync router */
+			 <0x00 0x01000000 0x00 0x01000000 0x00 0x0d000000>, /* Most peripherals */
+			 <0x00 0x30000000 0x00 0x30000000 0x00 0x0c400000>, /* MAIN NAVSS */
+			 <0x00 0x70000000 0x00 0x70000000 0x00 0x00800000>, /* MSMC RAM */
+			 <0x41 0x00000000 0x41 0x00000000 0x01 0x00000000>, /* PCIe1 DAT */
+
+			 /* MCUSS_WKUP Range */
+			 <0x00 0x28380000 0x00 0x28380000 0x00 0x03880000>,
+			 <0x00 0x40200000 0x00 0x40200000 0x00 0x00998400>,
+			 <0x00 0x40f00000 0x00 0x40f00000 0x00 0x00020000>,
+			 <0x00 0x41000000 0x00 0x41000000 0x00 0x00020000>,
+			 <0x00 0x41400000 0x00 0x41400000 0x00 0x00020000>,
+			 <0x00 0x41c00000 0x00 0x41c00000 0x00 0x00100000>,
+			 <0x00 0x42040000 0x00 0x42040000 0x00 0x03ac2400>,
+			 <0x00 0x45100000 0x00 0x45100000 0x00 0x00c24000>,
+			 <0x00 0x46000000 0x00 0x46000000 0x00 0x00200000>,
+			 <0x00 0x47000000 0x00 0x47000000 0x00 0x00068400>,
+			 <0x00 0x50000000 0x00 0x50000000 0x00 0x10000000>;
+
+		cbass_mcu_wakeup: bus at 28380000 {
+			compatible = "simple-bus";
+			#address-cells = <2>;
+			#size-cells = <2>;
+			ranges = <0x00 0x28380000 0x00 0x28380000 0x00 0x03880000>, /* MCU NAVSS*/
+				 <0x00 0x40200000 0x00 0x40200000 0x00 0x00998400>, /* First peripheral window */
+				 <0x00 0x40f00000 0x00 0x40f00000 0x00 0x00020000>, /* CTRL_MMR0 */
+				 <0x00 0x41000000 0x00 0x41000000 0x00 0x00020000>, /* MCU R5F Core0 */
+				 <0x00 0x41400000 0x00 0x41400000 0x00 0x00020000>, /* MCU R5F Core1 */
+				 <0x00 0x41c00000 0x00 0x41c00000 0x00 0x00100000>, /* MCU SRAM */
+				 <0x00 0x42040000 0x00 0x42040000 0x00 0x03ac2400>, /* WKUP peripheral window */
+				 <0x00 0x45100000 0x00 0x45100000 0x00 0x00c24000>, /* MMRs, remaining NAVSS */
+				 <0x00 0x46000000 0x00 0x46000000 0x00 0x00200000>, /* CPSW */
+				 <0x00 0x47000000 0x00 0x47000000 0x00 0x00068400>, /* OSPI register space */
+				 <0x00 0x50000000 0x00 0x50000000 0x00 0x10000000>; /* FSS OSPI0/1 data region 0 */
+		};
+	};
+};
+
+/* Now include the peripherals for each bus segments */
+#include "k3-j7200-main.dtsi"
+#include "k3-j7200-mcu-wakeup.dtsi"
-- 
2.27.0