[PATCH v5 00/10] powerpc/watchpoint: Enable 2nd DAWR on baremetal and powervm

[PATCH v5 00/10] powerpc/watchpoint: Enable 2nd DAWR on baremetal and powervm

[Ravi Bangoria]

Last series[1] was to add basic infrastructure support for more than
one watchpoint on Book3S powerpc. This series actually enables the 2nd 
DAWR for baremetal and powervm. Kvm guest is still not supported.

v4: https://lore.kernel.org/r/20200717040958.70561-1-ravi.bangoria@linux.ibm.com

v4->v5:
 - Using hardcoded values instead of macros HBP_NUM_ONE and HBP_NUM_TWO.
   Comment above HBP_NUM_MAX changed to explain it's value.
 - Included CPU_FTR_DAWR1 into CPU_FTRS_POWER10
 - Using generic function feat_enable() instead of
   feat_enable_debug_facilities_v31() to enable CPU_FTR_DAWR1.
 - ISA still includes 512B boundary in match criteria. But that's a
   documentation mistake. Mentioned about this in the last patch.
 - Rebased to powerpc/next
 - Added Jordan's Reviewed-by/Tested-by tags

[1]: https://lore.kernel.org/linuxppc-dev/20200514111741.97993-1-ravi.bangoria@linux.ibm.com/

Ravi Bangoria (10):
  powerpc/watchpoint: Fix 512 byte boundary limit
  powerpc/watchpoint: Fix DAWR exception constraint
  powerpc/watchpoint: Fix DAWR exception for CACHEOP
  powerpc/watchpoint: Enable watchpoint functionality on power10 guest
  powerpc/dt_cpu_ftrs: Add feature for 2nd DAWR
  powerpc/watchpoint: Set CPU_FTR_DAWR1 based on pa-features bit
  powerpc/watchpoint: Rename current H_SET_MODE DAWR macro
  powerpc/watchpoint: Guest support for 2nd DAWR hcall
  powerpc/watchpoint: Return available watchpoints dynamically
  powerpc/watchpoint: Remove 512 byte boundary

 arch/powerpc/include/asm/cputable.h       |  8 +-
 arch/powerpc/include/asm/hvcall.h         |  3 +-
 arch/powerpc/include/asm/hw_breakpoint.h  |  4 +-
 arch/powerpc/include/asm/machdep.h        |  2 +-
 arch/powerpc/include/asm/plpar_wrappers.h |  7 +-
 arch/powerpc/kernel/dawr.c                |  2 +-
 arch/powerpc/kernel/dt_cpu_ftrs.c         |  1 +
 arch/powerpc/kernel/hw_breakpoint.c       | 98 +++++++++++++++--------
 arch/powerpc/kernel/prom.c                |  2 +
 arch/powerpc/kvm/book3s_hv.c              |  2 +-
 arch/powerpc/platforms/pseries/setup.c    |  7 +-
 11 files changed, 91 insertions(+), 45 deletions(-)

-- 
2.26.2

[PATCH v5 00/10] powerpc/watchpoint: Enable 2nd DAWR on baremetal and powervm

[Ravi Bangoria]

Last series[1] was to add basic infrastructure support for more than
one watchpoint on Book3S powerpc. This series actually enables the 2nd 
DAWR for baremetal and powervm. Kvm guest is still not supported.

v4: https://lore.kernel.org/r/20200717040958.70561-1-ravi.bangoria@linux.ibm.com

v4->v5:
 - Using hardcoded values instead of macros HBP_NUM_ONE and HBP_NUM_TWO.
   Comment above HBP_NUM_MAX changed to explain it's value.
 - Included CPU_FTR_DAWR1 into CPU_FTRS_POWER10
 - Using generic function feat_enable() instead of
   feat_enable_debug_facilities_v31() to enable CPU_FTR_DAWR1.
 - ISA still includes 512B boundary in match criteria. But that's a
   documentation mistake. Mentioned about this in the last patch.
 - Rebased to powerpc/next
 - Added Jordan's Reviewed-by/Tested-by tags

[1]: https://lore.kernel.org/linuxppc-dev/20200514111741.97993-1-ravi.bangoria@linux.ibm.com/

Ravi Bangoria (10):
  powerpc/watchpoint: Fix 512 byte boundary limit
  powerpc/watchpoint: Fix DAWR exception constraint
  powerpc/watchpoint: Fix DAWR exception for CACHEOP
  powerpc/watchpoint: Enable watchpoint functionality on power10 guest
  powerpc/dt_cpu_ftrs: Add feature for 2nd DAWR
  powerpc/watchpoint: Set CPU_FTR_DAWR1 based on pa-features bit
  powerpc/watchpoint: Rename current H_SET_MODE DAWR macro
  powerpc/watchpoint: Guest support for 2nd DAWR hcall
  powerpc/watchpoint: Return available watchpoints dynamically
  powerpc/watchpoint: Remove 512 byte boundary

 arch/powerpc/include/asm/cputable.h       |  8 +-
 arch/powerpc/include/asm/hvcall.h         |  3 +-
 arch/powerpc/include/asm/hw_breakpoint.h  |  4 +-
 arch/powerpc/include/asm/machdep.h        |  2 +-
 arch/powerpc/include/asm/plpar_wrappers.h |  7 +-
 arch/powerpc/kernel/dawr.c                |  2 +-
 arch/powerpc/kernel/dt_cpu_ftrs.c         |  1 +
 arch/powerpc/kernel/hw_breakpoint.c       | 98 +++++++++++++++--------
 arch/powerpc/kernel/prom.c                |  2 +
 arch/powerpc/kvm/book3s_hv.c              |  2 +-
 arch/powerpc/platforms/pseries/setup.c    |  7 +-
 11 files changed, 91 insertions(+), 45 deletions(-)

-- 
2.26.2

[PATCH v5 01/10] powerpc/watchpoint: Fix 512 byte boundary limit

[Ravi Bangoria]

Milton Miller reported that we are aligning start and end address to
wrong size SZ_512M. It should be SZ_512. Fix that.

While doing this change I also found a case where ALIGN() comparison
fails. Within a given aligned range, ALIGN() of two addresses does not
match when start address is pointing to the first byte and end address
is pointing to any other byte except the first one. But that's not true
for ALIGN_DOWN(). ALIGN_DOWN() of any two addresses within that range
will always point to the first byte. So use ALIGN_DOWN() instead of
ALIGN().

Fixes: e68ef121c1f4 ("powerpc/watchpoint: Use builtin ALIGN*() macros")
Reported-by: Milton Miller <miltonm@us.ibm.com>
Signed-off-by: Ravi Bangoria <ravi.bangoria@linux.ibm.com>
Tested-by: Jordan Niethe <jniethe5@gmail.com>
---
 arch/powerpc/kernel/hw_breakpoint.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/powerpc/kernel/hw_breakpoint.c b/arch/powerpc/kernel/hw_breakpoint.c
index 0000daf0e1da..031e6defc08e 100644
--- a/arch/powerpc/kernel/hw_breakpoint.c
+++ b/arch/powerpc/kernel/hw_breakpoint.c
@@ -419,7 +419,7 @@ static int hw_breakpoint_validate_len(struct arch_hw_breakpoint *hw)
 	if (dawr_enabled()) {
 		max_len = DAWR_MAX_LEN;
 		/* DAWR region can't cross 512 bytes boundary */
-		if (ALIGN(start_addr, SZ_512M) != ALIGN(end_addr - 1, SZ_512M))
+		if (ALIGN_DOWN(start_addr, SZ_512) != ALIGN_DOWN(end_addr - 1, SZ_512))
 			return -EINVAL;
 	} else if (IS_ENABLED(CONFIG_PPC_8xx)) {
 		/* 8xx can setup a range without limitation */
-- 
2.26.2

[PATCH v5 01/10] powerpc/watchpoint: Fix 512 byte boundary limit

[Ravi Bangoria]

Milton Miller reported that we are aligning start and end address to
wrong size SZ_512M. It should be SZ_512. Fix that.

While doing this change I also found a case where ALIGN() comparison
fails. Within a given aligned range, ALIGN() of two addresses does not
match when start address is pointing to the first byte and end address
is pointing to any other byte except the first one. But that's not true
for ALIGN_DOWN(). ALIGN_DOWN() of any two addresses within that range
will always point to the first byte. So use ALIGN_DOWN() instead of
ALIGN().

Fixes: e68ef121c1f4 ("powerpc/watchpoint: Use builtin ALIGN*() macros")
Reported-by: Milton Miller <miltonm@us.ibm.com>
Signed-off-by: Ravi Bangoria <ravi.bangoria@linux.ibm.com>
Tested-by: Jordan Niethe <jniethe5@gmail.com>
---
 arch/powerpc/kernel/hw_breakpoint.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/powerpc/kernel/hw_breakpoint.c b/arch/powerpc/kernel/hw_breakpoint.c
index 0000daf0e1da..031e6defc08e 100644
--- a/arch/powerpc/kernel/hw_breakpoint.c
+++ b/arch/powerpc/kernel/hw_breakpoint.c
@@ -419,7 +419,7 @@ static int hw_breakpoint_validate_len(struct arch_hw_breakpoint *hw)
 	if (dawr_enabled()) {
 		max_len = DAWR_MAX_LEN;
 		/* DAWR region can't cross 512 bytes boundary */
-		if (ALIGN(start_addr, SZ_512M) != ALIGN(end_addr - 1, SZ_512M))
+		if (ALIGN_DOWN(start_addr, SZ_512) != ALIGN_DOWN(end_addr - 1, SZ_512))
 			return -EINVAL;
 	} else if (IS_ENABLED(CONFIG_PPC_8xx)) {
 		/* 8xx can setup a range without limitation */
-- 
2.26.2

[PATCH v5 02/10] powerpc/watchpoint: Fix DAWR exception constraint

[Ravi Bangoria]

Pedro Miraglia Franco de Carvalho noticed that on p8/p9, DAR value is
inconsistent with different type of load/store. Like for byte,word
etc. load/stores, DAR is set to the address of the first byte of
overlap between watch range and real access. But for quadword load/
store it's sometime set to the address of the first byte of real
access whereas sometime set to the address of the first byte of
overlap. This issue has been fixed in p10. In p10(ISA 3.1), DAR is
always set to the address of the first byte of overlap. Commit 27985b2a640e
("powerpc/watchpoint: Don't ignore extraneous exceptions blindly")
wrongly assumes that DAR is set to the address of the first byte of
overlap for all load/stores on p8/p9 as well. Fix that. With the fix,
we now rely on 'ea' provided by analyse_instr(). If analyse_instr()
fails, generate event unconditionally on p8/p9, and on p10 generate
event only if DAR is within a DAWR range.

Note: 8xx is not affected.

Fixes: 27985b2a640e ("powerpc/watchpoint: Don't ignore extraneous exceptions blindly")
Fixes: 74c6881019b7 ("powerpc/watchpoint: Prepare handler to handle more than one watchpoint")
Reported-by: Pedro Miraglia Franco de Carvalho <pedromfc@br.ibm.com>
Signed-off-by: Ravi Bangoria <ravi.bangoria@linux.ibm.com>
---
 arch/powerpc/kernel/hw_breakpoint.c | 72 ++++++++++++++++-------------
 1 file changed, 41 insertions(+), 31 deletions(-)

diff --git a/arch/powerpc/kernel/hw_breakpoint.c b/arch/powerpc/kernel/hw_breakpoint.c
index 031e6defc08e..a971e22aea81 100644
--- a/arch/powerpc/kernel/hw_breakpoint.c
+++ b/arch/powerpc/kernel/hw_breakpoint.c
@@ -498,11 +498,11 @@ static bool dar_in_user_range(unsigned long dar, struct arch_hw_breakpoint *info
 	return ((info->address <= dar) && (dar - info->address < info->len));
 }
 
-static bool dar_user_range_overlaps(unsigned long dar, int size,
-				    struct arch_hw_breakpoint *info)
+static bool ea_user_range_overlaps(unsigned long ea, int size,
+				   struct arch_hw_breakpoint *info)
 {
-	return ((dar < info->address + info->len) &&
-		(dar + size > info->address));
+	return ((ea < info->address + info->len) &&
+		(ea + size > info->address));
 }
 
 static bool dar_in_hw_range(unsigned long dar, struct arch_hw_breakpoint *info)
@@ -515,20 +515,22 @@ static bool dar_in_hw_range(unsigned long dar, struct arch_hw_breakpoint *info)
 	return ((hw_start_addr <= dar) && (hw_end_addr > dar));
 }
 
-static bool dar_hw_range_overlaps(unsigned long dar, int size,
-				  struct arch_hw_breakpoint *info)
+static bool ea_hw_range_overlaps(unsigned long ea, int size,
+				 struct arch_hw_breakpoint *info)
 {
 	unsigned long hw_start_addr, hw_end_addr;
 
 	hw_start_addr = ALIGN_DOWN(info->address, HW_BREAKPOINT_SIZE);
 	hw_end_addr = ALIGN(info->address + info->len, HW_BREAKPOINT_SIZE);
 
-	return ((dar < hw_end_addr) && (dar + size > hw_start_addr));
+	return ((ea < hw_end_addr) && (ea + size > hw_start_addr));
 }
 
 /*
  * If hw has multiple DAWR registers, we also need to check all
  * dawrx constraint bits to confirm this is _really_ a valid event.
+ * If type is UNKNOWN, but privilege level matches, consider it as
+ * a positive match.
  */
 static bool check_dawrx_constraints(struct pt_regs *regs, int type,
 				    struct arch_hw_breakpoint *info)
@@ -553,7 +555,8 @@ static bool check_dawrx_constraints(struct pt_regs *regs, int type,
  * including extraneous exception. Otherwise return false.
  */
 static bool check_constraints(struct pt_regs *regs, struct ppc_inst instr,
-			      int type, int size, struct arch_hw_breakpoint *info)
+			      unsigned long ea, int type, int size,
+			      struct arch_hw_breakpoint *info)
 {
 	bool in_user_range = dar_in_user_range(regs->dar, info);
 	bool dawrx_constraints;
@@ -569,22 +572,27 @@ static bool check_constraints(struct pt_regs *regs, struct ppc_inst instr,
 	}
 
 	if (unlikely(ppc_inst_equal(instr, ppc_inst(0)))) {
-		if (in_user_range)
-			return true;
+		if (cpu_has_feature(CPU_FTR_ARCH_31) &&
+		    !dar_in_hw_range(regs->dar, info))
+			return false;
 
-		if (dar_in_hw_range(regs->dar, info)) {
-			info->type |= HW_BRK_TYPE_EXTRANEOUS_IRQ;
-			return true;
-		}
-		return false;
+		return true;
 	}
 
 	dawrx_constraints = check_dawrx_constraints(regs, type, info);
 
-	if (dar_user_range_overlaps(regs->dar, size, info))
+	if (type == UNKNOWN) {
+		if (cpu_has_feature(CPU_FTR_ARCH_31) &&
+		    !dar_in_hw_range(regs->dar, info))
+			return false;
+
 		return dawrx_constraints;
+	}
 
-	if (dar_hw_range_overlaps(regs->dar, size, info)) {
+	if (ea_user_range_overlaps(ea, size, info))
+		return dawrx_constraints;
+
+	if (ea_hw_range_overlaps(ea, size, info)) {
 		if (dawrx_constraints) {
 			info->type |= HW_BRK_TYPE_EXTRANEOUS_IRQ;
 			return true;
@@ -594,7 +602,7 @@ static bool check_constraints(struct pt_regs *regs, struct ppc_inst instr,
 }
 
 static void get_instr_detail(struct pt_regs *regs, struct ppc_inst *instr,
-			     int *type, int *size, bool *larx_stcx)
+			     int *type, int *size, unsigned long *ea)
 {
 	struct instruction_op op;
 
@@ -602,16 +610,18 @@ static void get_instr_detail(struct pt_regs *regs, struct ppc_inst *instr,
 		return;
 
 	analyse_instr(&op, regs, *instr);
-
-	/*
-	 * Set size = 8 if analyse_instr() fails. If it's a userspace
-	 * watchpoint(valid or extraneous), we can notify user about it.
-	 * If it's a kernel watchpoint, instruction  emulation will fail
-	 * in stepping_handler() and watchpoint will be disabled.
-	 */
 	*type = GETTYPE(op.type);
-	*size = !(*type == UNKNOWN) ? GETSIZE(op.type) : 8;
-	*larx_stcx = (*type == LARX || *type == STCX);
+	*ea = op.ea;
+#ifdef __powerpc64__
+	if (!(regs->msr & MSR_64BIT))
+		*ea &= 0xffffffffUL;
+#endif
+	*size = GETSIZE(op.type);
+}
+
+static bool is_larx_stcx_instr(int type)
+{
+	return type == LARX || type == STCX;
 }
 
 /*
@@ -678,7 +688,7 @@ int hw_breakpoint_handler(struct die_args *args)
 	struct ppc_inst instr = ppc_inst(0);
 	int type = 0;
 	int size = 0;
-	bool larx_stcx = false;
+	unsigned long ea;
 
 	/* Disable breakpoints during exception handling */
 	hw_breakpoint_disable();
@@ -692,7 +702,7 @@ int hw_breakpoint_handler(struct die_args *args)
 	rcu_read_lock();
 
 	if (!IS_ENABLED(CONFIG_PPC_8xx))
-		get_instr_detail(regs, &instr, &type, &size, &larx_stcx);
+		get_instr_detail(regs, &instr, &type, &size, &ea);
 
 	for (i = 0; i < nr_wp_slots(); i++) {
 		bp[i] = __this_cpu_read(bp_per_reg[i]);
@@ -702,7 +712,7 @@ int hw_breakpoint_handler(struct die_args *args)
 		info[i] = counter_arch_bp(bp[i]);
 		info[i]->type &= ~HW_BRK_TYPE_EXTRANEOUS_IRQ;
 
-		if (check_constraints(regs, instr, type, size, info[i])) {
+		if (check_constraints(regs, instr, ea, type, size, info[i])) {
 			if (!IS_ENABLED(CONFIG_PPC_8xx) &&
 			    ppc_inst_equal(instr, ppc_inst(0))) {
 				handler_error(bp[i], info[i]);
@@ -744,7 +754,7 @@ int hw_breakpoint_handler(struct die_args *args)
 	}
 
 	if (!IS_ENABLED(CONFIG_PPC_8xx)) {
-		if (larx_stcx) {
+		if (is_larx_stcx_instr(type)) {
 			for (i = 0; i < nr_wp_slots(); i++) {
 				if (!hit[i])
 					continue;
-- 
2.26.2

[PATCH v5 02/10] powerpc/watchpoint: Fix DAWR exception constraint

[Ravi Bangoria]

Pedro Miraglia Franco de Carvalho noticed that on p8/p9, DAR value is
inconsistent with different type of load/store. Like for byte,word
etc. load/stores, DAR is set to the address of the first byte of
overlap between watch range and real access. But for quadword load/
store it's sometime set to the address of the first byte of real
access whereas sometime set to the address of the first byte of
overlap. This issue has been fixed in p10. In p10(ISA 3.1), DAR is
always set to the address of the first byte of overlap. Commit 27985b2a640e
("powerpc/watchpoint: Don't ignore extraneous exceptions blindly")
wrongly assumes that DAR is set to the address of the first byte of
overlap for all load/stores on p8/p9 as well. Fix that. With the fix,
we now rely on 'ea' provided by analyse_instr(). If analyse_instr()
fails, generate event unconditionally on p8/p9, and on p10 generate
event only if DAR is within a DAWR range.

Note: 8xx is not affected.

Fixes: 27985b2a640e ("powerpc/watchpoint: Don't ignore extraneous exceptions blindly")
Fixes: 74c6881019b7 ("powerpc/watchpoint: Prepare handler to handle more than one watchpoint")
Reported-by: Pedro Miraglia Franco de Carvalho <pedromfc@br.ibm.com>
Signed-off-by: Ravi Bangoria <ravi.bangoria@linux.ibm.com>
---
 arch/powerpc/kernel/hw_breakpoint.c | 72 ++++++++++++++++-------------
 1 file changed, 41 insertions(+), 31 deletions(-)

diff --git a/arch/powerpc/kernel/hw_breakpoint.c b/arch/powerpc/kernel/hw_breakpoint.c
index 031e6defc08e..a971e22aea81 100644
--- a/arch/powerpc/kernel/hw_breakpoint.c
+++ b/arch/powerpc/kernel/hw_breakpoint.c
@@ -498,11 +498,11 @@ static bool dar_in_user_range(unsigned long dar, struct arch_hw_breakpoint *info
 	return ((info->address <= dar) && (dar - info->address < info->len));
 }
 
-static bool dar_user_range_overlaps(unsigned long dar, int size,
-				    struct arch_hw_breakpoint *info)
+static bool ea_user_range_overlaps(unsigned long ea, int size,
+				   struct arch_hw_breakpoint *info)
 {
-	return ((dar < info->address + info->len) &&
-		(dar + size > info->address));
+	return ((ea < info->address + info->len) &&
+		(ea + size > info->address));
 }
 
 static bool dar_in_hw_range(unsigned long dar, struct arch_hw_breakpoint *info)
@@ -515,20 +515,22 @@ static bool dar_in_hw_range(unsigned long dar, struct arch_hw_breakpoint *info)
 	return ((hw_start_addr <= dar) && (hw_end_addr > dar));
 }
 
-static bool dar_hw_range_overlaps(unsigned long dar, int size,
-				  struct arch_hw_breakpoint *info)
+static bool ea_hw_range_overlaps(unsigned long ea, int size,
+				 struct arch_hw_breakpoint *info)
 {
 	unsigned long hw_start_addr, hw_end_addr;
 
 	hw_start_addr = ALIGN_DOWN(info->address, HW_BREAKPOINT_SIZE);
 	hw_end_addr = ALIGN(info->address + info->len, HW_BREAKPOINT_SIZE);
 
-	return ((dar < hw_end_addr) && (dar + size > hw_start_addr));
+	return ((ea < hw_end_addr) && (ea + size > hw_start_addr));
 }
 
 /*
  * If hw has multiple DAWR registers, we also need to check all
  * dawrx constraint bits to confirm this is _really_ a valid event.
+ * If type is UNKNOWN, but privilege level matches, consider it as
+ * a positive match.
  */
 static bool check_dawrx_constraints(struct pt_regs *regs, int type,
 				    struct arch_hw_breakpoint *info)
@@ -553,7 +555,8 @@ static bool check_dawrx_constraints(struct pt_regs *regs, int type,
  * including extraneous exception. Otherwise return false.
  */
 static bool check_constraints(struct pt_regs *regs, struct ppc_inst instr,
-			      int type, int size, struct arch_hw_breakpoint *info)
+			      unsigned long ea, int type, int size,
+			      struct arch_hw_breakpoint *info)
 {
 	bool in_user_range = dar_in_user_range(regs->dar, info);
 	bool dawrx_constraints;
@@ -569,22 +572,27 @@ static bool check_constraints(struct pt_regs *regs, struct ppc_inst instr,
 	}
 
 	if (unlikely(ppc_inst_equal(instr, ppc_inst(0)))) {
-		if (in_user_range)
-			return true;
+		if (cpu_has_feature(CPU_FTR_ARCH_31) &&
+		    !dar_in_hw_range(regs->dar, info))
+			return false;
 
-		if (dar_in_hw_range(regs->dar, info)) {
-			info->type |= HW_BRK_TYPE_EXTRANEOUS_IRQ;
-			return true;
-		}
-		return false;
+		return true;
 	}
 
 	dawrx_constraints = check_dawrx_constraints(regs, type, info);
 
-	if (dar_user_range_overlaps(regs->dar, size, info))
+	if (type == UNKNOWN) {
+		if (cpu_has_feature(CPU_FTR_ARCH_31) &&
+		    !dar_in_hw_range(regs->dar, info))
+			return false;
+
 		return dawrx_constraints;
+	}
 
-	if (dar_hw_range_overlaps(regs->dar, size, info)) {
+	if (ea_user_range_overlaps(ea, size, info))
+		return dawrx_constraints;
+
+	if (ea_hw_range_overlaps(ea, size, info)) {
 		if (dawrx_constraints) {
 			info->type |= HW_BRK_TYPE_EXTRANEOUS_IRQ;
 			return true;
@@ -594,7 +602,7 @@ static bool check_constraints(struct pt_regs *regs, struct ppc_inst instr,
 }
 
 static void get_instr_detail(struct pt_regs *regs, struct ppc_inst *instr,
-			     int *type, int *size, bool *larx_stcx)
+			     int *type, int *size, unsigned long *ea)
 {
 	struct instruction_op op;
 
@@ -602,16 +610,18 @@ static void get_instr_detail(struct pt_regs *regs, struct ppc_inst *instr,
 		return;
 
 	analyse_instr(&op, regs, *instr);
-
-	/*
-	 * Set size = 8 if analyse_instr() fails. If it's a userspace
-	 * watchpoint(valid or extraneous), we can notify user about it.
-	 * If it's a kernel watchpoint, instruction  emulation will fail
-	 * in stepping_handler() and watchpoint will be disabled.
-	 */
 	*type = GETTYPE(op.type);
-	*size = !(*type == UNKNOWN) ? GETSIZE(op.type) : 8;
-	*larx_stcx = (*type == LARX || *type == STCX);
+	*ea = op.ea;
+#ifdef __powerpc64__
+	if (!(regs->msr & MSR_64BIT))
+		*ea &= 0xffffffffUL;
+#endif
+	*size = GETSIZE(op.type);
+}
+
+static bool is_larx_stcx_instr(int type)
+{
+	return type == LARX || type == STCX;
 }
 
 /*
@@ -678,7 +688,7 @@ int hw_breakpoint_handler(struct die_args *args)
 	struct ppc_inst instr = ppc_inst(0);
 	int type = 0;
 	int size = 0;
-	bool larx_stcx = false;
+	unsigned long ea;
 
 	/* Disable breakpoints during exception handling */
 	hw_breakpoint_disable();
@@ -692,7 +702,7 @@ int hw_breakpoint_handler(struct die_args *args)
 	rcu_read_lock();
 
 	if (!IS_ENABLED(CONFIG_PPC_8xx))
-		get_instr_detail(regs, &instr, &type, &size, &larx_stcx);
+		get_instr_detail(regs, &instr, &type, &size, &ea);
 
 	for (i = 0; i < nr_wp_slots(); i++) {
 		bp[i] = __this_cpu_read(bp_per_reg[i]);
@@ -702,7 +712,7 @@ int hw_breakpoint_handler(struct die_args *args)
 		info[i] = counter_arch_bp(bp[i]);
 		info[i]->type &= ~HW_BRK_TYPE_EXTRANEOUS_IRQ;
 
-		if (check_constraints(regs, instr, type, size, info[i])) {
+		if (check_constraints(regs, instr, ea, type, size, info[i])) {
 			if (!IS_ENABLED(CONFIG_PPC_8xx) &&
 			    ppc_inst_equal(instr, ppc_inst(0))) {
 				handler_error(bp[i], info[i]);
@@ -744,7 +754,7 @@ int hw_breakpoint_handler(struct die_args *args)
 	}
 
 	if (!IS_ENABLED(CONFIG_PPC_8xx)) {
-		if (larx_stcx) {
+		if (is_larx_stcx_instr(type)) {
 			for (i = 0; i < nr_wp_slots(); i++) {
 				if (!hit[i])
 					continue;
-- 
2.26.2

[PATCH v5 03/10] powerpc/watchpoint: Fix DAWR exception for CACHEOP

[Ravi Bangoria]

'ea' returned by analyse_instr() needs to be aligned down to cache
block size for CACHEOP instructions. analyse_instr() does not set
size for CACHEOP, thus size also needs to be calculated manually.

Fixes: 27985b2a640e ("powerpc/watchpoint: Don't ignore extraneous exceptions blindly")
Fixes: 74c6881019b7 ("powerpc/watchpoint: Prepare handler to handle more than one watchpoint")
Signed-off-by: Ravi Bangoria <ravi.bangoria@linux.ibm.com>
---
 arch/powerpc/kernel/hw_breakpoint.c | 21 ++++++++++++++++++++-
 1 file changed, 20 insertions(+), 1 deletion(-)

diff --git a/arch/powerpc/kernel/hw_breakpoint.c b/arch/powerpc/kernel/hw_breakpoint.c
index a971e22aea81..c55e67bab271 100644
--- a/arch/powerpc/kernel/hw_breakpoint.c
+++ b/arch/powerpc/kernel/hw_breakpoint.c
@@ -538,7 +538,12 @@ static bool check_dawrx_constraints(struct pt_regs *regs, int type,
 	if (OP_IS_LOAD(type) && !(info->type & HW_BRK_TYPE_READ))
 		return false;
 
-	if (OP_IS_STORE(type) && !(info->type & HW_BRK_TYPE_WRITE))
+	/*
+	 * The Cache Management instructions other than dcbz never
+	 * cause a match. i.e. if type is CACHEOP, the instruction
+	 * is dcbz, and dcbz is treated as Store.
+	 */
+	if ((OP_IS_STORE(type) || type == CACHEOP) && !(info->type & HW_BRK_TYPE_WRITE))
 		return false;
 
 	if (is_kernel_addr(regs->nip) && !(info->type & HW_BRK_TYPE_KERNEL))
@@ -601,6 +606,15 @@ static bool check_constraints(struct pt_regs *regs, struct ppc_inst instr,
 	return false;
 }
 
+static int cache_op_size(void)
+{
+#ifdef __powerpc64__
+	return ppc64_caches.l1d.block_size;
+#else
+	return L1_CACHE_BYTES;
+#endif
+}
+
 static void get_instr_detail(struct pt_regs *regs, struct ppc_inst *instr,
 			     int *type, int *size, unsigned long *ea)
 {
@@ -616,7 +630,12 @@ static void get_instr_detail(struct pt_regs *regs, struct ppc_inst *instr,
 	if (!(regs->msr & MSR_64BIT))
 		*ea &= 0xffffffffUL;
 #endif
+
 	*size = GETSIZE(op.type);
+	if (*type == CACHEOP) {
+		*size = cache_op_size();
+		*ea &= ~(*size - 1);
+	}
 }
 
 static bool is_larx_stcx_instr(int type)
-- 
2.26.2

[PATCH v5 03/10] powerpc/watchpoint: Fix DAWR exception for CACHEOP

[Ravi Bangoria]

'ea' returned by analyse_instr() needs to be aligned down to cache
block size for CACHEOP instructions. analyse_instr() does not set
size for CACHEOP, thus size also needs to be calculated manually.

Fixes: 27985b2a640e ("powerpc/watchpoint: Don't ignore extraneous exceptions blindly")
Fixes: 74c6881019b7 ("powerpc/watchpoint: Prepare handler to handle more than one watchpoint")
Signed-off-by: Ravi Bangoria <ravi.bangoria@linux.ibm.com>
---
 arch/powerpc/kernel/hw_breakpoint.c | 21 ++++++++++++++++++++-
 1 file changed, 20 insertions(+), 1 deletion(-)

diff --git a/arch/powerpc/kernel/hw_breakpoint.c b/arch/powerpc/kernel/hw_breakpoint.c
index a971e22aea81..c55e67bab271 100644
--- a/arch/powerpc/kernel/hw_breakpoint.c
+++ b/arch/powerpc/kernel/hw_breakpoint.c
@@ -538,7 +538,12 @@ static bool check_dawrx_constraints(struct pt_regs *regs, int type,
 	if (OP_IS_LOAD(type) && !(info->type & HW_BRK_TYPE_READ))
 		return false;
 
-	if (OP_IS_STORE(type) && !(info->type & HW_BRK_TYPE_WRITE))
+	/*
+	 * The Cache Management instructions other than dcbz never
+	 * cause a match. i.e. if type is CACHEOP, the instruction
+	 * is dcbz, and dcbz is treated as Store.
+	 */
+	if ((OP_IS_STORE(type) || type == CACHEOP) && !(info->type & HW_BRK_TYPE_WRITE))
 		return false;
 
 	if (is_kernel_addr(regs->nip) && !(info->type & HW_BRK_TYPE_KERNEL))
@@ -601,6 +606,15 @@ static bool check_constraints(struct pt_regs *regs, struct ppc_inst instr,
 	return false;
 }
 
+static int cache_op_size(void)
+{
+#ifdef __powerpc64__
+	return ppc64_caches.l1d.block_size;
+#else
+	return L1_CACHE_BYTES;
+#endif
+}
+
 static void get_instr_detail(struct pt_regs *regs, struct ppc_inst *instr,
 			     int *type, int *size, unsigned long *ea)
 {
@@ -616,7 +630,12 @@ static void get_instr_detail(struct pt_regs *regs, struct ppc_inst *instr,
 	if (!(regs->msr & MSR_64BIT))
 		*ea &= 0xffffffffUL;
 #endif
+
 	*size = GETSIZE(op.type);
+	if (*type == CACHEOP) {
+		*size = cache_op_size();
+		*ea &= ~(*size - 1);
+	}
 }
 
 static bool is_larx_stcx_instr(int type)
-- 
2.26.2

[PATCH v5 04/10] powerpc/watchpoint: Enable watchpoint functionality on power10 guest

[Ravi Bangoria]

CPU_FTR_DAWR is by default enabled for host via CPU_FTRS_DT_CPU_BASE
(controlled by CONFIG_PPC_DT_CPU_FTRS). But cpu-features device-tree
node is not PAPR compatible and thus not yet used by kvm or pHyp
guests. Enable watchpoint functionality on power10 guest (both kvm
and powervm) by adding CPU_FTR_DAWR to CPU_FTRS_POWER10. Note that
this change does not enable 2nd DAWR support.

Signed-off-by: Ravi Bangoria <ravi.bangoria@linux.ibm.com>
Tested-by: Jordan Niethe <jniethe5@gmail.com>
---
 arch/powerpc/include/asm/cputable.h | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/powerpc/include/asm/cputable.h b/arch/powerpc/include/asm/cputable.h
index bac2252c839e..e506d429b1af 100644
--- a/arch/powerpc/include/asm/cputable.h
+++ b/arch/powerpc/include/asm/cputable.h
@@ -478,7 +478,7 @@ static inline void cpu_feature_keys_init(void) { }
 	    CPU_FTR_CFAR | CPU_FTR_HVMODE | CPU_FTR_VMX_COPY | \
 	    CPU_FTR_DBELL | CPU_FTR_HAS_PPR | CPU_FTR_ARCH_207S | \
 	    CPU_FTR_TM_COMP | CPU_FTR_ARCH_300 | CPU_FTR_PKEY | \
-	    CPU_FTR_ARCH_31)
+	    CPU_FTR_ARCH_31 | CPU_FTR_DAWR)
 #define CPU_FTRS_CELL	(CPU_FTR_LWSYNC | \
 	    CPU_FTR_PPCAS_ARCH_V2 | CPU_FTR_CTRL | \
 	    CPU_FTR_ALTIVEC_COMP | CPU_FTR_MMCRA | CPU_FTR_SMT | \
-- 
2.26.2

[PATCH v5 04/10] powerpc/watchpoint: Enable watchpoint functionality on power10 guest

[Ravi Bangoria]

CPU_FTR_DAWR is by default enabled for host via CPU_FTRS_DT_CPU_BASE
(controlled by CONFIG_PPC_DT_CPU_FTRS). But cpu-features device-tree
node is not PAPR compatible and thus not yet used by kvm or pHyp
guests. Enable watchpoint functionality on power10 guest (both kvm
and powervm) by adding CPU_FTR_DAWR to CPU_FTRS_POWER10. Note that
this change does not enable 2nd DAWR support.

Signed-off-by: Ravi Bangoria <ravi.bangoria@linux.ibm.com>
Tested-by: Jordan Niethe <jniethe5@gmail.com>
---
 arch/powerpc/include/asm/cputable.h | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/powerpc/include/asm/cputable.h b/arch/powerpc/include/asm/cputable.h
index bac2252c839e..e506d429b1af 100644
--- a/arch/powerpc/include/asm/cputable.h
+++ b/arch/powerpc/include/asm/cputable.h
@@ -478,7 +478,7 @@ static inline void cpu_feature_keys_init(void) { }
 	    CPU_FTR_CFAR | CPU_FTR_HVMODE | CPU_FTR_VMX_COPY | \
 	    CPU_FTR_DBELL | CPU_FTR_HAS_PPR | CPU_FTR_ARCH_207S | \
 	    CPU_FTR_TM_COMP | CPU_FTR_ARCH_300 | CPU_FTR_PKEY | \
-	    CPU_FTR_ARCH_31)
+	    CPU_FTR_ARCH_31 | CPU_FTR_DAWR)
 #define CPU_FTRS_CELL	(CPU_FTR_LWSYNC | \
 	    CPU_FTR_PPCAS_ARCH_V2 | CPU_FTR_CTRL | \
 	    CPU_FTR_ALTIVEC_COMP | CPU_FTR_MMCRA | CPU_FTR_SMT | \
-- 
2.26.2

[PATCH v5 05/10] powerpc/dt_cpu_ftrs: Add feature for 2nd DAWR

[Ravi Bangoria]

Add new device-tree feature for 2nd DAWR. If this feature is present,
2nd DAWR is supported, otherwise not.

Signed-off-by: Ravi Bangoria <ravi.bangoria@linux.ibm.com>
---
 arch/powerpc/include/asm/cputable.h | 3 ++-
 arch/powerpc/kernel/dt_cpu_ftrs.c   | 1 +
 2 files changed, 3 insertions(+), 1 deletion(-)

diff --git a/arch/powerpc/include/asm/cputable.h b/arch/powerpc/include/asm/cputable.h
index e506d429b1af..5583f2d08df7 100644
--- a/arch/powerpc/include/asm/cputable.h
+++ b/arch/powerpc/include/asm/cputable.h
@@ -214,6 +214,7 @@ static inline void cpu_feature_keys_init(void) { }
 #define CPU_FTR_P9_TLBIE_ERAT_BUG	LONG_ASM_CONST(0x0001000000000000)
 #define CPU_FTR_P9_RADIX_PREFETCH_BUG	LONG_ASM_CONST(0x0002000000000000)
 #define CPU_FTR_ARCH_31			LONG_ASM_CONST(0x0004000000000000)
+#define CPU_FTR_DAWR1			LONG_ASM_CONST(0x0008000000000000)
 
 #ifndef __ASSEMBLY__
 
@@ -478,7 +479,7 @@ static inline void cpu_feature_keys_init(void) { }
 	    CPU_FTR_CFAR | CPU_FTR_HVMODE | CPU_FTR_VMX_COPY | \
 	    CPU_FTR_DBELL | CPU_FTR_HAS_PPR | CPU_FTR_ARCH_207S | \
 	    CPU_FTR_TM_COMP | CPU_FTR_ARCH_300 | CPU_FTR_PKEY | \
-	    CPU_FTR_ARCH_31 | CPU_FTR_DAWR)
+	    CPU_FTR_ARCH_31 | CPU_FTR_DAWR | CPU_FTR_DAWR1)
 #define CPU_FTRS_CELL	(CPU_FTR_LWSYNC | \
 	    CPU_FTR_PPCAS_ARCH_V2 | CPU_FTR_CTRL | \
 	    CPU_FTR_ALTIVEC_COMP | CPU_FTR_MMCRA | CPU_FTR_SMT | \
diff --git a/arch/powerpc/kernel/dt_cpu_ftrs.c b/arch/powerpc/kernel/dt_cpu_ftrs.c
index ac650c233cd9..675b824038f9 100644
--- a/arch/powerpc/kernel/dt_cpu_ftrs.c
+++ b/arch/powerpc/kernel/dt_cpu_ftrs.c
@@ -649,6 +649,7 @@ static struct dt_cpu_feature_match __initdata
 	{"wait-v3", feat_enable, 0},
 	{"prefix-instructions", feat_enable, 0},
 	{"matrix-multiply-assist", feat_enable_mma, 0},
+	{"debug-facilities-v31", feat_enable, CPU_FTR_DAWR1},
 };
 
 static bool __initdata using_dt_cpu_ftrs;
-- 
2.26.2

[PATCH v5 05/10] powerpc/dt_cpu_ftrs: Add feature for 2nd DAWR

[Ravi Bangoria]

Add new device-tree feature for 2nd DAWR. If this feature is present,
2nd DAWR is supported, otherwise not.

Signed-off-by: Ravi Bangoria <ravi.bangoria@linux.ibm.com>
---
 arch/powerpc/include/asm/cputable.h | 3 ++-
 arch/powerpc/kernel/dt_cpu_ftrs.c   | 1 +
 2 files changed, 3 insertions(+), 1 deletion(-)

diff --git a/arch/powerpc/include/asm/cputable.h b/arch/powerpc/include/asm/cputable.h
index e506d429b1af..5583f2d08df7 100644
--- a/arch/powerpc/include/asm/cputable.h
+++ b/arch/powerpc/include/asm/cputable.h
@@ -214,6 +214,7 @@ static inline void cpu_feature_keys_init(void) { }
 #define CPU_FTR_P9_TLBIE_ERAT_BUG	LONG_ASM_CONST(0x0001000000000000)
 #define CPU_FTR_P9_RADIX_PREFETCH_BUG	LONG_ASM_CONST(0x0002000000000000)
 #define CPU_FTR_ARCH_31			LONG_ASM_CONST(0x0004000000000000)
+#define CPU_FTR_DAWR1			LONG_ASM_CONST(0x0008000000000000)
 
 #ifndef __ASSEMBLY__
 
@@ -478,7 +479,7 @@ static inline void cpu_feature_keys_init(void) { }
 	    CPU_FTR_CFAR | CPU_FTR_HVMODE | CPU_FTR_VMX_COPY | \
 	    CPU_FTR_DBELL | CPU_FTR_HAS_PPR | CPU_FTR_ARCH_207S | \
 	    CPU_FTR_TM_COMP | CPU_FTR_ARCH_300 | CPU_FTR_PKEY | \
-	    CPU_FTR_ARCH_31 | CPU_FTR_DAWR)
+	    CPU_FTR_ARCH_31 | CPU_FTR_DAWR | CPU_FTR_DAWR1)
 #define CPU_FTRS_CELL	(CPU_FTR_LWSYNC | \
 	    CPU_FTR_PPCAS_ARCH_V2 | CPU_FTR_CTRL | \
 	    CPU_FTR_ALTIVEC_COMP | CPU_FTR_MMCRA | CPU_FTR_SMT | \
diff --git a/arch/powerpc/kernel/dt_cpu_ftrs.c b/arch/powerpc/kernel/dt_cpu_ftrs.c
index ac650c233cd9..675b824038f9 100644
--- a/arch/powerpc/kernel/dt_cpu_ftrs.c
+++ b/arch/powerpc/kernel/dt_cpu_ftrs.c
@@ -649,6 +649,7 @@ static struct dt_cpu_feature_match __initdata
 	{"wait-v3", feat_enable, 0},
 	{"prefix-instructions", feat_enable, 0},
 	{"matrix-multiply-assist", feat_enable_mma, 0},
+	{"debug-facilities-v31", feat_enable, CPU_FTR_DAWR1},
 };
 
 static bool __initdata using_dt_cpu_ftrs;
-- 
2.26.2

[PATCH v5 06/10] powerpc/watchpoint: Set CPU_FTR_DAWR1 based on pa-features bit

[Ravi Bangoria]

As per the PAPR, bit 0 of byte 64 in pa-features property indicates
availability of 2nd DAWR registers. i.e. If this bit is set, 2nd
DAWR is present, otherwise not. Host generally uses "cpu-features",
which masks "pa-features". But "cpu-features" are still not used for
guests and thus this change is mostly applicable for guests only.

Signed-off-by: Ravi Bangoria <ravi.bangoria@linux.ibm.com>
Tested-by: Jordan Niethe <jniethe5@gmail.com>
---
 arch/powerpc/kernel/prom.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/arch/powerpc/kernel/prom.c b/arch/powerpc/kernel/prom.c
index 033d43819ed8..01dda206d68e 100644
--- a/arch/powerpc/kernel/prom.c
+++ b/arch/powerpc/kernel/prom.c
@@ -175,6 +175,8 @@ static struct ibm_pa_feature {
 	 */
 	{ .pabyte = 22, .pabit = 0, .cpu_features = CPU_FTR_TM_COMP,
 	  .cpu_user_ftrs2 = PPC_FEATURE2_HTM_COMP | PPC_FEATURE2_HTM_NOSC_COMP },
+
+	{ .pabyte = 64, .pabit = 0, .cpu_features = CPU_FTR_DAWR1 },
 };
 
 static void __init scan_features(unsigned long node, const unsigned char *ftrs,
-- 
2.26.2

[PATCH v5 06/10] powerpc/watchpoint: Set CPU_FTR_DAWR1 based on pa-features bit

[Ravi Bangoria]

As per the PAPR, bit 0 of byte 64 in pa-features property indicates
availability of 2nd DAWR registers. i.e. If this bit is set, 2nd
DAWR is present, otherwise not. Host generally uses "cpu-features",
which masks "pa-features". But "cpu-features" are still not used for
guests and thus this change is mostly applicable for guests only.

Signed-off-by: Ravi Bangoria <ravi.bangoria@linux.ibm.com>
Tested-by: Jordan Niethe <jniethe5@gmail.com>
---
 arch/powerpc/kernel/prom.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/arch/powerpc/kernel/prom.c b/arch/powerpc/kernel/prom.c
index 033d43819ed8..01dda206d68e 100644
--- a/arch/powerpc/kernel/prom.c
+++ b/arch/powerpc/kernel/prom.c
@@ -175,6 +175,8 @@ static struct ibm_pa_feature {
 	 */
 	{ .pabyte = 22, .pabit = 0, .cpu_features = CPU_FTR_TM_COMP,
 	  .cpu_user_ftrs2 = PPC_FEATURE2_HTM_COMP | PPC_FEATURE2_HTM_NOSC_COMP },
+
+	{ .pabyte = 64, .pabit = 0, .cpu_features = CPU_FTR_DAWR1 },
 };
 
 static void __init scan_features(unsigned long node, const unsigned char *ftrs,
-- 
2.26.2

[PATCH v5 07/10] powerpc/watchpoint: Rename current H_SET_MODE DAWR macro

[Ravi Bangoria]

Current H_SET_MODE hcall macro name for setting/resetting DAWR0 is
H_SET_MODE_RESOURCE_SET_DAWR. Add suffix 0 to macro name as well.

Signed-off-by: Ravi Bangoria <ravi.bangoria@linux.ibm.com>
Reviewed-by: Jordan Niethe <jniethe5@gmail.com>
---
 arch/powerpc/include/asm/hvcall.h         | 2 +-
 arch/powerpc/include/asm/plpar_wrappers.h | 2 +-
 arch/powerpc/kvm/book3s_hv.c              | 2 +-
 3 files changed, 3 insertions(+), 3 deletions(-)

diff --git a/arch/powerpc/include/asm/hvcall.h b/arch/powerpc/include/asm/hvcall.h
index 43486e773bd6..b785e9f0071c 100644
--- a/arch/powerpc/include/asm/hvcall.h
+++ b/arch/powerpc/include/asm/hvcall.h
@@ -355,7 +355,7 @@
 
 /* Values for 2nd argument to H_SET_MODE */
 #define H_SET_MODE_RESOURCE_SET_CIABR		1
-#define H_SET_MODE_RESOURCE_SET_DAWR		2
+#define H_SET_MODE_RESOURCE_SET_DAWR0		2
 #define H_SET_MODE_RESOURCE_ADDR_TRANS_MODE	3
 #define H_SET_MODE_RESOURCE_LE			4
 
diff --git a/arch/powerpc/include/asm/plpar_wrappers.h b/arch/powerpc/include/asm/plpar_wrappers.h
index 4293c5d2ddf4..d12c3680d946 100644
--- a/arch/powerpc/include/asm/plpar_wrappers.h
+++ b/arch/powerpc/include/asm/plpar_wrappers.h
@@ -312,7 +312,7 @@ static inline long plpar_set_ciabr(unsigned long ciabr)
 
 static inline long plpar_set_watchpoint0(unsigned long dawr0, unsigned long dawrx0)
 {
-	return plpar_set_mode(0, H_SET_MODE_RESOURCE_SET_DAWR, dawr0, dawrx0);
+	return plpar_set_mode(0, H_SET_MODE_RESOURCE_SET_DAWR0, dawr0, dawrx0);
 }
 
 static inline long plpar_signal_sys_reset(long cpu)
diff --git a/arch/powerpc/kvm/book3s_hv.c b/arch/powerpc/kvm/book3s_hv.c
index 6bf66649ab92..7ad692c2d7c7 100644
--- a/arch/powerpc/kvm/book3s_hv.c
+++ b/arch/powerpc/kvm/book3s_hv.c
@@ -764,7 +764,7 @@ static int kvmppc_h_set_mode(struct kvm_vcpu *vcpu, unsigned long mflags,
 			return H_P3;
 		vcpu->arch.ciabr  = value1;
 		return H_SUCCESS;
-	case H_SET_MODE_RESOURCE_SET_DAWR:
+	case H_SET_MODE_RESOURCE_SET_DAWR0:
 		if (!kvmppc_power8_compatible(vcpu))
 			return H_P2;
 		if (!ppc_breakpoint_available())
-- 
2.26.2

[PATCH v5 07/10] powerpc/watchpoint: Rename current H_SET_MODE DAWR macro

[Ravi Bangoria]

Current H_SET_MODE hcall macro name for setting/resetting DAWR0 is
H_SET_MODE_RESOURCE_SET_DAWR. Add suffix 0 to macro name as well.

Signed-off-by: Ravi Bangoria <ravi.bangoria@linux.ibm.com>
Reviewed-by: Jordan Niethe <jniethe5@gmail.com>
---
 arch/powerpc/include/asm/hvcall.h         | 2 +-
 arch/powerpc/include/asm/plpar_wrappers.h | 2 +-
 arch/powerpc/kvm/book3s_hv.c              | 2 +-
 3 files changed, 3 insertions(+), 3 deletions(-)

diff --git a/arch/powerpc/include/asm/hvcall.h b/arch/powerpc/include/asm/hvcall.h
index 43486e773bd6..b785e9f0071c 100644
--- a/arch/powerpc/include/asm/hvcall.h
+++ b/arch/powerpc/include/asm/hvcall.h
@@ -355,7 +355,7 @@
 
 /* Values for 2nd argument to H_SET_MODE */
 #define H_SET_MODE_RESOURCE_SET_CIABR		1
-#define H_SET_MODE_RESOURCE_SET_DAWR		2
+#define H_SET_MODE_RESOURCE_SET_DAWR0		2
 #define H_SET_MODE_RESOURCE_ADDR_TRANS_MODE	3
 #define H_SET_MODE_RESOURCE_LE			4
 
diff --git a/arch/powerpc/include/asm/plpar_wrappers.h b/arch/powerpc/include/asm/plpar_wrappers.h
index 4293c5d2ddf4..d12c3680d946 100644
--- a/arch/powerpc/include/asm/plpar_wrappers.h
+++ b/arch/powerpc/include/asm/plpar_wrappers.h
@@ -312,7 +312,7 @@ static inline long plpar_set_ciabr(unsigned long ciabr)
 
 static inline long plpar_set_watchpoint0(unsigned long dawr0, unsigned long dawrx0)
 {
-	return plpar_set_mode(0, H_SET_MODE_RESOURCE_SET_DAWR, dawr0, dawrx0);
+	return plpar_set_mode(0, H_SET_MODE_RESOURCE_SET_DAWR0, dawr0, dawrx0);
 }
 
 static inline long plpar_signal_sys_reset(long cpu)
diff --git a/arch/powerpc/kvm/book3s_hv.c b/arch/powerpc/kvm/book3s_hv.c
index 6bf66649ab92..7ad692c2d7c7 100644
--- a/arch/powerpc/kvm/book3s_hv.c
+++ b/arch/powerpc/kvm/book3s_hv.c
@@ -764,7 +764,7 @@ static int kvmppc_h_set_mode(struct kvm_vcpu *vcpu, unsigned long mflags,
 			return H_P3;
 		vcpu->arch.ciabr  = value1;
 		return H_SUCCESS;
-	case H_SET_MODE_RESOURCE_SET_DAWR:
+	case H_SET_MODE_RESOURCE_SET_DAWR0:
 		if (!kvmppc_power8_compatible(vcpu))
 			return H_P2;
 		if (!ppc_breakpoint_available())
-- 
2.26.2

[PATCH v5 08/10] powerpc/watchpoint: Guest support for 2nd DAWR hcall

[Ravi Bangoria]

2nd DAWR can be set/unset using H_SET_MODE hcall with resource value 5.
Enable powervm guest support with that. This has no effect on kvm guest
because kvm will return error if guest does hcall with resource value 5.

Signed-off-by: Ravi Bangoria <ravi.bangoria@linux.ibm.com>
---
 arch/powerpc/include/asm/hvcall.h         | 1 +
 arch/powerpc/include/asm/machdep.h        | 2 +-
 arch/powerpc/include/asm/plpar_wrappers.h | 5 +++++
 arch/powerpc/kernel/dawr.c                | 2 +-
 arch/powerpc/platforms/pseries/setup.c    | 7 +++++--
 5 files changed, 13 insertions(+), 4 deletions(-)

diff --git a/arch/powerpc/include/asm/hvcall.h b/arch/powerpc/include/asm/hvcall.h
index b785e9f0071c..33793444144c 100644
--- a/arch/powerpc/include/asm/hvcall.h
+++ b/arch/powerpc/include/asm/hvcall.h
@@ -358,6 +358,7 @@
 #define H_SET_MODE_RESOURCE_SET_DAWR0		2
 #define H_SET_MODE_RESOURCE_ADDR_TRANS_MODE	3
 #define H_SET_MODE_RESOURCE_LE			4
+#define H_SET_MODE_RESOURCE_SET_DAWR1		5
 
 /* Values for argument to H_SIGNAL_SYS_RESET */
 #define H_SIGNAL_SYS_RESET_ALL			-1
diff --git a/arch/powerpc/include/asm/machdep.h b/arch/powerpc/include/asm/machdep.h
index 7bcb64444a39..a90b892f0bfe 100644
--- a/arch/powerpc/include/asm/machdep.h
+++ b/arch/powerpc/include/asm/machdep.h
@@ -131,7 +131,7 @@ struct machdep_calls {
 				    unsigned long dabrx);
 
 	/* Set DAWR for this platform, leave empty for default implementation */
-	int		(*set_dawr)(unsigned long dawr,
+	int		(*set_dawr)(int nr, unsigned long dawr,
 				    unsigned long dawrx);
 
 #ifdef CONFIG_PPC32	/* XXX for now */
diff --git a/arch/powerpc/include/asm/plpar_wrappers.h b/arch/powerpc/include/asm/plpar_wrappers.h
index d12c3680d946..ece84a430701 100644
--- a/arch/powerpc/include/asm/plpar_wrappers.h
+++ b/arch/powerpc/include/asm/plpar_wrappers.h
@@ -315,6 +315,11 @@ static inline long plpar_set_watchpoint0(unsigned long dawr0, unsigned long dawr
 	return plpar_set_mode(0, H_SET_MODE_RESOURCE_SET_DAWR0, dawr0, dawrx0);
 }
 
+static inline long plpar_set_watchpoint1(unsigned long dawr1, unsigned long dawrx1)
+{
+	return plpar_set_mode(0, H_SET_MODE_RESOURCE_SET_DAWR1, dawr1, dawrx1);
+}
+
 static inline long plpar_signal_sys_reset(long cpu)
 {
 	return plpar_hcall_norets(H_SIGNAL_SYS_RESET, cpu);
diff --git a/arch/powerpc/kernel/dawr.c b/arch/powerpc/kernel/dawr.c
index 500f52fa4711..cdc2dccb987d 100644
--- a/arch/powerpc/kernel/dawr.c
+++ b/arch/powerpc/kernel/dawr.c
@@ -37,7 +37,7 @@ int set_dawr(int nr, struct arch_hw_breakpoint *brk)
 	dawrx |= (mrd & 0x3f) << (63 - 53);
 
 	if (ppc_md.set_dawr)
-		return ppc_md.set_dawr(dawr, dawrx);
+		return ppc_md.set_dawr(nr, dawr, dawrx);
 
 	if (nr == 0) {
 		mtspr(SPRN_DAWR0, dawr);
diff --git a/arch/powerpc/platforms/pseries/setup.c b/arch/powerpc/platforms/pseries/setup.c
index 2db8469e475f..d516ee8eb7fc 100644
--- a/arch/powerpc/platforms/pseries/setup.c
+++ b/arch/powerpc/platforms/pseries/setup.c
@@ -831,12 +831,15 @@ static int pseries_set_xdabr(unsigned long dabr, unsigned long dabrx)
 	return plpar_hcall_norets(H_SET_XDABR, dabr, dabrx);
 }
 
-static int pseries_set_dawr(unsigned long dawr, unsigned long dawrx)
+static int pseries_set_dawr(int nr, unsigned long dawr, unsigned long dawrx)
 {
 	/* PAPR says we can't set HYP */
 	dawrx &= ~DAWRX_HYP;
 
-	return  plpar_set_watchpoint0(dawr, dawrx);
+	if (nr == 0)
+		return plpar_set_watchpoint0(dawr, dawrx);
+	else
+		return plpar_set_watchpoint1(dawr, dawrx);
 }
 
 #define CMO_CHARACTERISTICS_TOKEN 44
-- 
2.26.2

[PATCH v5 08/10] powerpc/watchpoint: Guest support for 2nd DAWR hcall

[Ravi Bangoria]

2nd DAWR can be set/unset using H_SET_MODE hcall with resource value 5.
Enable powervm guest support with that. This has no effect on kvm guest
because kvm will return error if guest does hcall with resource value 5.

Signed-off-by: Ravi Bangoria <ravi.bangoria@linux.ibm.com>
---
 arch/powerpc/include/asm/hvcall.h         | 1 +
 arch/powerpc/include/asm/machdep.h        | 2 +-
 arch/powerpc/include/asm/plpar_wrappers.h | 5 +++++
 arch/powerpc/kernel/dawr.c                | 2 +-
 arch/powerpc/platforms/pseries/setup.c    | 7 +++++--
 5 files changed, 13 insertions(+), 4 deletions(-)

diff --git a/arch/powerpc/include/asm/hvcall.h b/arch/powerpc/include/asm/hvcall.h
index b785e9f0071c..33793444144c 100644
--- a/arch/powerpc/include/asm/hvcall.h
+++ b/arch/powerpc/include/asm/hvcall.h
@@ -358,6 +358,7 @@
 #define H_SET_MODE_RESOURCE_SET_DAWR0		2
 #define H_SET_MODE_RESOURCE_ADDR_TRANS_MODE	3
 #define H_SET_MODE_RESOURCE_LE			4
+#define H_SET_MODE_RESOURCE_SET_DAWR1		5
 
 /* Values for argument to H_SIGNAL_SYS_RESET */
 #define H_SIGNAL_SYS_RESET_ALL			-1
diff --git a/arch/powerpc/include/asm/machdep.h b/arch/powerpc/include/asm/machdep.h
index 7bcb64444a39..a90b892f0bfe 100644
--- a/arch/powerpc/include/asm/machdep.h
+++ b/arch/powerpc/include/asm/machdep.h
@@ -131,7 +131,7 @@ struct machdep_calls {
 				    unsigned long dabrx);
 
 	/* Set DAWR for this platform, leave empty for default implementation */
-	int		(*set_dawr)(unsigned long dawr,
+	int		(*set_dawr)(int nr, unsigned long dawr,
 				    unsigned long dawrx);
 
 #ifdef CONFIG_PPC32	/* XXX for now */
diff --git a/arch/powerpc/include/asm/plpar_wrappers.h b/arch/powerpc/include/asm/plpar_wrappers.h
index d12c3680d946..ece84a430701 100644
--- a/arch/powerpc/include/asm/plpar_wrappers.h
+++ b/arch/powerpc/include/asm/plpar_wrappers.h
@@ -315,6 +315,11 @@ static inline long plpar_set_watchpoint0(unsigned long dawr0, unsigned long dawr
 	return plpar_set_mode(0, H_SET_MODE_RESOURCE_SET_DAWR0, dawr0, dawrx0);
 }
 
+static inline long plpar_set_watchpoint1(unsigned long dawr1, unsigned long dawrx1)
+{
+	return plpar_set_mode(0, H_SET_MODE_RESOURCE_SET_DAWR1, dawr1, dawrx1);
+}
+
 static inline long plpar_signal_sys_reset(long cpu)
 {
 	return plpar_hcall_norets(H_SIGNAL_SYS_RESET, cpu);
diff --git a/arch/powerpc/kernel/dawr.c b/arch/powerpc/kernel/dawr.c
index 500f52fa4711..cdc2dccb987d 100644
--- a/arch/powerpc/kernel/dawr.c
+++ b/arch/powerpc/kernel/dawr.c
@@ -37,7 +37,7 @@ int set_dawr(int nr, struct arch_hw_breakpoint *brk)
 	dawrx |= (mrd & 0x3f) << (63 - 53);
 
 	if (ppc_md.set_dawr)
-		return ppc_md.set_dawr(dawr, dawrx);
+		return ppc_md.set_dawr(nr, dawr, dawrx);
 
 	if (nr == 0) {
 		mtspr(SPRN_DAWR0, dawr);
diff --git a/arch/powerpc/platforms/pseries/setup.c b/arch/powerpc/platforms/pseries/setup.c
index 2db8469e475f..d516ee8eb7fc 100644
--- a/arch/powerpc/platforms/pseries/setup.c
+++ b/arch/powerpc/platforms/pseries/setup.c
@@ -831,12 +831,15 @@ static int pseries_set_xdabr(unsigned long dabr, unsigned long dabrx)
 	return plpar_hcall_norets(H_SET_XDABR, dabr, dabrx);
 }
 
-static int pseries_set_dawr(unsigned long dawr, unsigned long dawrx)
+static int pseries_set_dawr(int nr, unsigned long dawr, unsigned long dawrx)
 {
 	/* PAPR says we can't set HYP */
 	dawrx &= ~DAWRX_HYP;
 
-	return  plpar_set_watchpoint0(dawr, dawrx);
+	if (nr == 0)
+		return plpar_set_watchpoint0(dawr, dawrx);
+	else
+		return plpar_set_watchpoint1(dawr, dawrx);
 }
 
 #define CMO_CHARACTERISTICS_TOKEN 44
-- 
2.26.2

[PATCH v5 09/10] powerpc/watchpoint: Return available watchpoints dynamically

[Ravi Bangoria]

So far Book3S Powerpc supported only one watchpoint. Power10 is
introducing 2nd DAWR. Enable 2nd DAWR support for Power10.
Availability of 2nd DAWR will depend on CPU_FTR_DAWR1.

Signed-off-by: Ravi Bangoria <ravi.bangoria@linux.ibm.com>
---
 arch/powerpc/include/asm/cputable.h      | 5 +++--
 arch/powerpc/include/asm/hw_breakpoint.h | 4 +++-
 2 files changed, 6 insertions(+), 3 deletions(-)

diff --git a/arch/powerpc/include/asm/cputable.h b/arch/powerpc/include/asm/cputable.h
index 5583f2d08df7..fa1232c33ab9 100644
--- a/arch/powerpc/include/asm/cputable.h
+++ b/arch/powerpc/include/asm/cputable.h
@@ -629,9 +629,10 @@ enum {
 
 /*
  * Maximum number of hw breakpoint supported on powerpc. Number of
- * breakpoints supported by actual hw might be less than this.
+ * breakpoints supported by actual hw might be less than this, which
+ * is decided at run time in nr_wp_slots().
  */
-#define HBP_NUM_MAX	1
+#define HBP_NUM_MAX	2
 
 #endif /* !__ASSEMBLY__ */
 
diff --git a/arch/powerpc/include/asm/hw_breakpoint.h b/arch/powerpc/include/asm/hw_breakpoint.h
index cb424799da0d..c89250b6ac34 100644
--- a/arch/powerpc/include/asm/hw_breakpoint.h
+++ b/arch/powerpc/include/asm/hw_breakpoint.h
@@ -9,6 +9,8 @@
 #ifndef _PPC_BOOK3S_64_HW_BREAKPOINT_H
 #define _PPC_BOOK3S_64_HW_BREAKPOINT_H
 
+#include <asm/cpu_has_feature.h>
+
 #ifdef	__KERNEL__
 struct arch_hw_breakpoint {
 	unsigned long	address;
@@ -46,7 +48,7 @@ struct arch_hw_breakpoint {
 
 static inline int nr_wp_slots(void)
 {
-	return HBP_NUM_MAX;
+	return cpu_has_feature(CPU_FTR_DAWR1) ? 2 : 1;
 }
 
 #ifdef CONFIG_HAVE_HW_BREAKPOINT
-- 
2.26.2

[PATCH v5 09/10] powerpc/watchpoint: Return available watchpoints dynamically

[Ravi Bangoria]

So far Book3S Powerpc supported only one watchpoint. Power10 is
introducing 2nd DAWR. Enable 2nd DAWR support for Power10.
Availability of 2nd DAWR will depend on CPU_FTR_DAWR1.

Signed-off-by: Ravi Bangoria <ravi.bangoria@linux.ibm.com>
---
 arch/powerpc/include/asm/cputable.h      | 5 +++--
 arch/powerpc/include/asm/hw_breakpoint.h | 4 +++-
 2 files changed, 6 insertions(+), 3 deletions(-)

diff --git a/arch/powerpc/include/asm/cputable.h b/arch/powerpc/include/asm/cputable.h
index 5583f2d08df7..fa1232c33ab9 100644
--- a/arch/powerpc/include/asm/cputable.h
+++ b/arch/powerpc/include/asm/cputable.h
@@ -629,9 +629,10 @@ enum {
 
 /*
  * Maximum number of hw breakpoint supported on powerpc. Number of
- * breakpoints supported by actual hw might be less than this.
+ * breakpoints supported by actual hw might be less than this, which
+ * is decided at run time in nr_wp_slots().
  */
-#define HBP_NUM_MAX	1
+#define HBP_NUM_MAX	2
 
 #endif /* !__ASSEMBLY__ */
 
diff --git a/arch/powerpc/include/asm/hw_breakpoint.h b/arch/powerpc/include/asm/hw_breakpoint.h
index cb424799da0d..c89250b6ac34 100644
--- a/arch/powerpc/include/asm/hw_breakpoint.h
+++ b/arch/powerpc/include/asm/hw_breakpoint.h
@@ -9,6 +9,8 @@
 #ifndef _PPC_BOOK3S_64_HW_BREAKPOINT_H
 #define _PPC_BOOK3S_64_HW_BREAKPOINT_H
 
+#include <asm/cpu_has_feature.h>
+
 #ifdef	__KERNEL__
 struct arch_hw_breakpoint {
 	unsigned long	address;
@@ -46,7 +48,7 @@ struct arch_hw_breakpoint {
 
 static inline int nr_wp_slots(void)
 {
-	return HBP_NUM_MAX;
+	return cpu_has_feature(CPU_FTR_DAWR1) ? 2 : 1;
 }
 
 #ifdef CONFIG_HAVE_HW_BREAKPOINT
-- 
2.26.2

[PATCH v5 10/10] powerpc/watchpoint: Remove 512 byte boundary

[Ravi Bangoria]

Power10 has removed 512 bytes boundary from match criteria i.e. the watch
range can cross 512 bytes boundary.

Note: ISA 3.1 Book III 9.4 match criteria includes 512 byte limit but that
is a documentation mistake and hopefully will be fixed in the next version
of ISA. Though, ISA 3.1 change log mentions about removal of 512B boundary:

  Multiple DEAW:
  Added a second Data Address Watchpoint. [H]DAR is
  set to the first byte of overlap. 512B boundary is
  removed.

Signed-off-by: Ravi Bangoria <ravi.bangoria@linux.ibm.com>
---
 arch/powerpc/kernel/hw_breakpoint.c | 5 +++--
 1 file changed, 3 insertions(+), 2 deletions(-)

diff --git a/arch/powerpc/kernel/hw_breakpoint.c b/arch/powerpc/kernel/hw_breakpoint.c
index c55e67bab271..1f4a1efa0074 100644
--- a/arch/powerpc/kernel/hw_breakpoint.c
+++ b/arch/powerpc/kernel/hw_breakpoint.c
@@ -418,8 +418,9 @@ static int hw_breakpoint_validate_len(struct arch_hw_breakpoint *hw)
 
 	if (dawr_enabled()) {
 		max_len = DAWR_MAX_LEN;
-		/* DAWR region can't cross 512 bytes boundary */
-		if (ALIGN_DOWN(start_addr, SZ_512) != ALIGN_DOWN(end_addr - 1, SZ_512))
+		/* DAWR region can't cross 512 bytes boundary on p10 predecessors */
+		if (!cpu_has_feature(CPU_FTR_ARCH_31) &&
+		    (ALIGN_DOWN(start_addr, SZ_512) != ALIGN_DOWN(end_addr - 1, SZ_512)))
 			return -EINVAL;
 	} else if (IS_ENABLED(CONFIG_PPC_8xx)) {
 		/* 8xx can setup a range without limitation */
-- 
2.26.2

[PATCH v5 10/10] powerpc/watchpoint: Remove 512 byte boundary

[Ravi Bangoria]

Power10 has removed 512 bytes boundary from match criteria i.e. the watch
range can cross 512 bytes boundary.

Note: ISA 3.1 Book III 9.4 match criteria includes 512 byte limit but that
is a documentation mistake and hopefully will be fixed in the next version
of ISA. Though, ISA 3.1 change log mentions about removal of 512B boundary:

  Multiple DEAW:
  Added a second Data Address Watchpoint. [H]DAR is
  set to the first byte of overlap. 512B boundary is
  removed.

Signed-off-by: Ravi Bangoria <ravi.bangoria@linux.ibm.com>
---
 arch/powerpc/kernel/hw_breakpoint.c | 5 +++--
 1 file changed, 3 insertions(+), 2 deletions(-)

diff --git a/arch/powerpc/kernel/hw_breakpoint.c b/arch/powerpc/kernel/hw_breakpoint.c
index c55e67bab271..1f4a1efa0074 100644
--- a/arch/powerpc/kernel/hw_breakpoint.c
+++ b/arch/powerpc/kernel/hw_breakpoint.c
@@ -418,8 +418,9 @@ static int hw_breakpoint_validate_len(struct arch_hw_breakpoint *hw)
 
 	if (dawr_enabled()) {
 		max_len = DAWR_MAX_LEN;
-		/* DAWR region can't cross 512 bytes boundary */
-		if (ALIGN_DOWN(start_addr, SZ_512) != ALIGN_DOWN(end_addr - 1, SZ_512))
+		/* DAWR region can't cross 512 bytes boundary on p10 predecessors */
+		if (!cpu_has_feature(CPU_FTR_ARCH_31) &&
+		    (ALIGN_DOWN(start_addr, SZ_512) != ALIGN_DOWN(end_addr - 1, SZ_512)))
 			return -EINVAL;
 	} else if (IS_ENABLED(CONFIG_PPC_8xx)) {
 		/* 8xx can setup a range without limitation */
-- 
2.26.2

Re: [PATCH v5 00/10] powerpc/watchpoint: Enable 2nd DAWR on baremetal and powervm

[Michael Ellerman]

On Thu, 23 Jul 2020 14:38:03 +0530, Ravi Bangoria wrote:
> Last series[1] was to add basic infrastructure support for more than
> one watchpoint on Book3S powerpc. This series actually enables the 2nd
> DAWR for baremetal and powervm. Kvm guest is still not supported.
> 
> v4: https://lore.kernel.org/r/20200717040958.70561-1-ravi.bangoria@linux.ibm.com
> 
> v4->v5:
>  - Using hardcoded values instead of macros HBP_NUM_ONE and HBP_NUM_TWO.
>    Comment above HBP_NUM_MAX changed to explain it's value.
>  - Included CPU_FTR_DAWR1 into CPU_FTRS_POWER10
>  - Using generic function feat_enable() instead of
>    feat_enable_debug_facilities_v31() to enable CPU_FTR_DAWR1.
>  - ISA still includes 512B boundary in match criteria. But that's a
>    documentation mistake. Mentioned about this in the last patch.
>  - Rebased to powerpc/next
>  - Added Jordan's Reviewed-by/Tested-by tags
> 
> [...]

Applied to powerpc/next.

[01/10] powerpc/watchpoint: Fix 512 byte boundary limit
        https://git.kernel.org/powerpc/c/3190ecbfeeb2ab17778887ce3fa964615d6460fd
[02/10] powerpc/watchpoint: Fix DAWR exception constraint
        https://git.kernel.org/powerpc/c/f6780ce619f8daa285760302d56e95892087bd1f
[03/10] powerpc/watchpoint: Fix DAWR exception for CACHEOP
        https://git.kernel.org/powerpc/c/f3c832f1350bcf1e6906113ee3168066f4235dbe
[04/10] powerpc/watchpoint: Enable watchpoint functionality on power10 guest
        https://git.kernel.org/powerpc/c/8f460a8175e6d85537d581734e9fa7ef97036b1a
[05/10] powerpc/dt_cpu_ftrs: Add feature for 2nd DAWR
        https://git.kernel.org/powerpc/c/dc1cedca54704d336c333b5398daaf13b23e391b
[06/10] powerpc/watchpoint: Set CPU_FTR_DAWR1 based on pa-features bit
        https://git.kernel.org/powerpc/c/8f45ca3f8b87c4810674fbfe65de6d041ee0baee
[07/10] powerpc/watchpoint: Rename current H_SET_MODE DAWR macro
        https://git.kernel.org/powerpc/c/6f3fe297f95134e9b2386dae0067bf530e1ddca0
[08/10] powerpc/watchpoint: Guest support for 2nd DAWR hcall
        https://git.kernel.org/powerpc/c/03f3e54abd95061ea11bdb4eedbe3cab6553704f
[09/10] powerpc/watchpoint: Return available watchpoints dynamically
        https://git.kernel.org/powerpc/c/deb2bd9bcc8428d4b65b6ba640ba8b57c1b20b17
[10/10] powerpc/watchpoint: Remove 512 byte boundary
        https://git.kernel.org/powerpc/c/3f31e49dc4588d396023028791e36c23235e1334

cheers

Re: [PATCH v5 00/10] powerpc/watchpoint: Enable 2nd DAWR on baremetal and powervm

[Michael Ellerman]

On Thu, 23 Jul 2020 14:38:03 +0530, Ravi Bangoria wrote:
> Last series[1] was to add basic infrastructure support for more than
> one watchpoint on Book3S powerpc. This series actually enables the 2nd
> DAWR for baremetal and powervm. Kvm guest is still not supported.
> 
> v4: https://lore.kernel.org/r/20200717040958.70561-1-ravi.bangoria@linux.ibm.com
> 
> v4->v5:
>  - Using hardcoded values instead of macros HBP_NUM_ONE and HBP_NUM_TWO.
>    Comment above HBP_NUM_MAX changed to explain it's value.
>  - Included CPU_FTR_DAWR1 into CPU_FTRS_POWER10
>  - Using generic function feat_enable() instead of
>    feat_enable_debug_facilities_v31() to enable CPU_FTR_DAWR1.
>  - ISA still includes 512B boundary in match criteria. But that's a
>    documentation mistake. Mentioned about this in the last patch.
>  - Rebased to powerpc/next
>  - Added Jordan's Reviewed-by/Tested-by tags
> 
> [...]

Applied to powerpc/next.

[01/10] powerpc/watchpoint: Fix 512 byte boundary limit
        https://git.kernel.org/powerpc/c/3190ecbfeeb2ab17778887ce3fa964615d6460fd
[02/10] powerpc/watchpoint: Fix DAWR exception constraint
        https://git.kernel.org/powerpc/c/f6780ce619f8daa285760302d56e95892087bd1f
[03/10] powerpc/watchpoint: Fix DAWR exception for CACHEOP
        https://git.kernel.org/powerpc/c/f3c832f1350bcf1e6906113ee3168066f4235dbe
[04/10] powerpc/watchpoint: Enable watchpoint functionality on power10 guest
        https://git.kernel.org/powerpc/c/8f460a8175e6d85537d581734e9fa7ef97036b1a
[05/10] powerpc/dt_cpu_ftrs: Add feature for 2nd DAWR
        https://git.kernel.org/powerpc/c/dc1cedca54704d336c333b5398daaf13b23e391b
[06/10] powerpc/watchpoint: Set CPU_FTR_DAWR1 based on pa-features bit
        https://git.kernel.org/powerpc/c/8f45ca3f8b87c4810674fbfe65de6d041ee0baee
[07/10] powerpc/watchpoint: Rename current H_SET_MODE DAWR macro
        https://git.kernel.org/powerpc/c/6f3fe297f95134e9b2386dae0067bf530e1ddca0
[08/10] powerpc/watchpoint: Guest support for 2nd DAWR hcall
        https://git.kernel.org/powerpc/c/03f3e54abd95061ea11bdb4eedbe3cab6553704f
[09/10] powerpc/watchpoint: Return available watchpoints dynamically
        https://git.kernel.org/powerpc/c/deb2bd9bcc8428d4b65b6ba640ba8b57c1b20b17
[10/10] powerpc/watchpoint: Remove 512 byte boundary
        https://git.kernel.org/powerpc/c/3f31e49dc4588d396023028791e36c23235e1334

cheers