From mboxrd@z Thu Jan 1 00:00:00 1970 From: Ovidiu Panait Date: Fri, 24 Jul 2020 14:12:18 +0300 Subject: [PATCH v4 10/17] board_f: m68k: Factor out m68k-specific bdinfo setup In-Reply-To: <20200724111225.12513-1-ovidiu.panait@windriver.com> References: <20200724111225.12513-1-ovidiu.panait@windriver.com> Message-ID: <20200724111225.12513-10-ovidiu.panait@windriver.com> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de Factor out m68k-specific bdinfo setup to arch_setup_bdinfo in arch/m68k/lib/bdinfo.c. Also, use if(IS_ENABLED()) instead of #ifdef where possible. Reviewed-by: Simon Glass Signed-off-by: Ovidiu Panait --- arch/m68k/lib/bdinfo.c | 21 +++++++++++++++++++++ common/board_f.c | 19 ++++--------------- 2 files changed, 25 insertions(+), 15 deletions(-) diff --git a/arch/m68k/lib/bdinfo.c b/arch/m68k/lib/bdinfo.c index b7bc6a3044..404e5f19ed 100644 --- a/arch/m68k/lib/bdinfo.c +++ b/arch/m68k/lib/bdinfo.c @@ -11,6 +11,27 @@ DECLARE_GLOBAL_DATA_PTR; +int arch_setup_bdinfo(void) +{ + struct bd_info *bd = gd->bd; + + bd->bi_mbar_base = CONFIG_SYS_MBAR; /* base of internal registers */ + + bd->bi_intfreq = gd->cpu_clk; /* Internal Freq, in Hz */ + bd->bi_busfreq = gd->bus_clk; /* Bus Freq, in Hz */ + + if (IS_ENABLED(CONFIG_PCI)) + bd->bi_pcifreq = gd->pci_clk; + +#if defined(CONFIG_EXTRA_CLOCK) + bd->bi_inpfreq = gd->arch.inp_clk; /* input Freq in Hz */ + bd->bi_vcofreq = gd->arch.vco_clk; /* vco Freq in Hz */ + bd->bi_flbfreq = gd->arch.flb_clk; /* flexbus Freq in Hz */ +#endif + + return 0; +} + void arch_print_bdinfo(void) { struct bd_info *bd = gd->bd; diff --git a/common/board_f.c b/common/board_f.c index e83bc2eb05..0c20f3fadf 100644 --- a/common/board_f.c +++ b/common/board_f.c @@ -618,7 +618,7 @@ int setup_bdinfo(void) return arch_setup_bdinfo(); } -#if defined(CONFIG_M68K) || defined(CONFIG_MIPS) || defined(CONFIG_PPC) || \ +#if defined(CONFIG_MIPS) || defined(CONFIG_PPC) || \ defined(CONFIG_SH) static int setup_board_part1(void) { @@ -627,9 +627,6 @@ static int setup_board_part1(void) #if defined(CONFIG_E500) || defined(CONFIG_MPC86xx) bd->bi_immr_base = CONFIG_SYS_IMMR; /* base of IMMR register */ #endif -#if defined(CONFIG_M68K) - bd->bi_mbar_base = CONFIG_SYS_MBAR; /* base of internal registers */ -#endif #if defined(CONFIG_MPC83xx) bd->bi_immrbar = CONFIG_SYS_IMMR; #endif @@ -638,7 +635,7 @@ static int setup_board_part1(void) } #endif -#if defined(CONFIG_PPC) || defined(CONFIG_M68K) +#if defined(CONFIG_PPC) static int setup_board_part2(void) { struct bd_info *bd = gd->bd; @@ -651,14 +648,6 @@ static int setup_board_part2(void) bd->bi_sccfreq = gd->arch.scc_clk; bd->bi_vco = gd->arch.vco_out; #endif /* CONFIG_CPM2 */ -#if defined(CONFIG_M68K) && defined(CONFIG_PCI) - bd->bi_pcifreq = gd->pci_clk; -#endif -#if defined(CONFIG_EXTRA_CLOCK) - bd->bi_inpfreq = gd->arch.inp_clk; /* input Freq in Hz */ - bd->bi_vcofreq = gd->arch.vco_clk; /* vco Freq in Hz */ - bd->bi_flbfreq = gd->arch.flb_clk; /* flexbus Freq in Hz */ -#endif return 0; } @@ -985,11 +974,11 @@ static const init_fnc_t init_sequence_f[] = { dram_init_banksize, show_dram_config, setup_bdinfo, -#if defined(CONFIG_M68K) || defined(CONFIG_MIPS) || defined(CONFIG_PPC) || \ +#if defined(CONFIG_MIPS) || defined(CONFIG_PPC) || \ defined(CONFIG_SH) setup_board_part1, #endif -#if defined(CONFIG_PPC) || defined(CONFIG_M68K) +#if defined(CONFIG_PPC) INIT_FUNC_WATCHDOG_RESET setup_board_part2, #endif -- 2.17.1