All of lore.kernel.org
 help / color / mirror / Atom feed
From: Patrick Keroulas <patrick.keroulas@radio-canada.ca>
To: dev@dpdk.org
Cc: Patrick Keroulas <patrick.keroulas@radio-canada.ca>
Subject: [dpdk-dev] [[PATCH v3 2/4] ethdev: add API to query device frequency
Date: Fri, 24 Jul 2020 16:23:13 -0400	[thread overview]
Message-ID: <20200724202315.19533-3-patrick.keroulas@radio-canada.ca> (raw)
In-Reply-To: <20200724202315.19533-1-patrick.keroulas@radio-canada.ca>

Signed-off-by: Patrick Keroulas <patrick.keroulas@radio-canada.ca>
---
 lib/librte_ethdev/rte_ethdev.c           | 12 ++++++++++++
 lib/librte_ethdev/rte_ethdev.h           | 17 +++++++++++++++++
 lib/librte_ethdev/rte_ethdev_core.h      |  5 +++++
 lib/librte_ethdev/rte_ethdev_version.map |  2 ++
 4 files changed, 36 insertions(+)

diff --git a/lib/librte_ethdev/rte_ethdev.c b/lib/librte_ethdev/rte_ethdev.c
index 7858ad5f11..8e8812782f 100644
--- a/lib/librte_ethdev/rte_ethdev.c
+++ b/lib/librte_ethdev/rte_ethdev.c
@@ -4882,6 +4882,18 @@ rte_eth_read_clock(uint16_t port_id, uint64_t *clock)
 	return eth_err(port_id, (*dev->dev_ops->read_clock)(dev, clock));
 }
 
+int
+rte_eth_get_clock_freq(uint16_t port_id, uint64_t *freq)
+{
+	struct rte_eth_dev *dev;
+
+	RTE_ETH_VALID_PORTID_OR_ERR_RET(port_id, -ENODEV);
+	dev = &rte_eth_devices[port_id];
+
+	RTE_FUNC_PTR_OR_ERR_RET(*dev->dev_ops->get_clock_freq, -ENOTSUP);
+	return eth_err(port_id, (*dev->dev_ops->get_clock_freq)(dev, freq));
+}
+
 int
 rte_eth_dev_get_reg_info(uint16_t port_id, struct rte_dev_reg_info *info)
 {
diff --git a/lib/librte_ethdev/rte_ethdev.h b/lib/librte_ethdev/rte_ethdev.h
index 57e4a6ca58..d17838e66f 100644
--- a/lib/librte_ethdev/rte_ethdev.h
+++ b/lib/librte_ethdev/rte_ethdev.h
@@ -4264,6 +4264,23 @@ __rte_experimental
 int
 rte_eth_read_clock(uint16_t port_id, uint64_t *clock);
 
+/**
+ * Get the clock frequency of ethernet device, in Hz
+ *
+ * @param port_id
+ *   The port identifier of the Ethernet device.
+ * @param[out] freq
+ *   Pointer to the device clock frequency.
+ *
+ * @return
+ *   - 0: Success.
+ *   - -ENODEV: The port ID is invalid.
+ *   - -ENOTSUP: The function is not supported by the Ethernet driver.
+ */
+__rte_experimental
+int
+rte_eth_get_clock_freq(uint16_t port_id, uint64_t *freq);
+
 /**
  * Config l2 tunnel ether type of an Ethernet device for filtering specific
  * tunnel packets by ether type.
diff --git a/lib/librte_ethdev/rte_ethdev_core.h b/lib/librte_ethdev/rte_ethdev_core.h
index 32407dd418..ac64961e6f 100644
--- a/lib/librte_ethdev/rte_ethdev_core.h
+++ b/lib/librte_ethdev/rte_ethdev_core.h
@@ -468,6 +468,10 @@ typedef int (*eth_read_clock)(struct rte_eth_dev *dev,
 				      uint64_t *timestamp);
 /**< @internal Function used to get the current value of the device clock. */
 
+typedef int (*eth_get_clock_freq)(struct rte_eth_dev *dev,
+				      uint64_t *freq);
+/**< @internal Function used to frequency from device clock */
+
 typedef int (*eth_get_reg_t)(struct rte_eth_dev *dev,
 				struct rte_dev_reg_info *info);
 /**< @internal Retrieve registers  */
@@ -731,6 +735,7 @@ struct eth_dev_ops {
 	eth_timesync_write_time    timesync_write_time; /** Set the device clock time. */
 
 	eth_read_clock             read_clock;
+	eth_get_clock_freq         get_clock_freq;
 
 	eth_xstats_get_by_id_t     xstats_get_by_id;
 	/**< Get extended device statistic values by ID. */
diff --git a/lib/librte_ethdev/rte_ethdev_version.map b/lib/librte_ethdev/rte_ethdev_version.map
index 1212a17d32..ffc00bf94f 100644
--- a/lib/librte_ethdev/rte_ethdev_version.map
+++ b/lib/librte_ethdev/rte_ethdev_version.map
@@ -241,6 +241,8 @@ EXPERIMENTAL {
 	__rte_ethdev_trace_rx_burst;
 	__rte_ethdev_trace_tx_burst;
 	rte_flow_get_aged_flows;
+
+	rte_eth_get_clock_freq;
 };
 
 INTERNAL {
-- 
2.17.1


  parent reply	other threads:[~2020-07-24 20:23 UTC|newest]

Thread overview: 11+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-07-24 20:23 [dpdk-dev] [[PATCH v3 0/4] pdump HW Rx timestamps for mlx5 Patrick Keroulas
2020-07-24 20:23 ` [dpdk-dev] [[PATCH v3 1/4] net/mlx5: query device frequency Patrick Keroulas
2020-07-24 20:23 ` Patrick Keroulas [this message]
2020-07-24 20:23 ` [dpdk-dev] [[PATCH v3 3/4] pdump: convert timestamp to nanoseconds on Rx path Patrick Keroulas
2020-09-02 15:41   ` Pattan, Reshma
2020-07-24 20:23 ` [dpdk-dev] [[PATCH v3 4/4] net/pcap: support hardware Tx timestamps Patrick Keroulas
2020-07-25  8:35   ` Tom Barbette
2020-07-25 11:51     ` Stephen Hemminger
2020-07-26 22:17   ` Stephen Hemminger
2020-10-06 16:25 ` [dpdk-dev] [[PATCH v3 0/4] pdump HW Rx timestamps for mlx5 Ferruh Yigit
2020-10-07  6:59   ` Morten Brørup

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20200724202315.19533-3-patrick.keroulas@radio-canada.ca \
    --to=patrick.keroulas@radio-canada.ca \
    --cc=dev@dpdk.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.