[PATCH 1/2] arm: dts: k3-am65: Fix interconnect node names

[Suman Anna <s-anna@ti.com>]

The various CBASS interconnect nodes on K3 AM65x SoCs are defined
using the node name "interconnect". This is not a valid node name
as per the dt-schema. Fix these node names to use the standard name
used for SoC interconnects, "bus".

Signed-off-by: Suman Anna <s-anna@ti.com>
---
 arch/arm/dts/k3-am65.dtsi | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/arch/arm/dts/k3-am65.dtsi b/arch/arm/dts/k3-am65.dtsi
index 3d89bf32a9d1..4d6d196b2aa3 100644
--- a/arch/arm/dts/k3-am65.dtsi
+++ b/arch/arm/dts/k3-am65.dtsi
@@ -62,7 +62,7 @@
 		interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_HIGH>;
 	};
 
-	cbass_main: interconnect at 100000 {
+	cbass_main: bus at 100000 {
 		compatible = "simple-bus";
 		#address-cells = <2>;
 		#size-cells = <2>;
@@ -87,7 +87,7 @@
 			 <0x05 0x00000000 0x05 0x00000000 0x01 0x0000000>,
 			 <0x07 0x00000000 0x07 0x00000000 0x01 0x0000000>;
 
-		cbass_mcu: interconnect at 28380000 {
+		cbass_mcu: bus at 28380000 {
 			compatible = "simple-bus";
 			#address-cells = <2>;
 			#size-cells = <2>;
@@ -104,7 +104,7 @@
 				 <0x05 0x00000000 0x05 0x00000000 0x01 0x0000000>, /* FSS OSPI0 data region 3*/
 				 <0x07 0x00000000 0x07 0x00000000 0x01 0x0000000>; /* FSS OSPI1 data region 3*/
 
-			cbass_wakeup: interconnect at 42040000 {
+			cbass_wakeup: bus at 42040000 {
 				compatible = "simple-bus";
 				#address-cells = <1>;
 				#size-cells = <1>;
-- 
2.26.0