[PATCH v2 0/2] i2c: stm32: add host-notify support via i2c slave

[PATCH v2 0/2] i2c: stm32: add host-notify support via i2c slave

[Alain Volmat]

This serie replaces the previous 'stm32-f7: Addition of SMBus Alert /
Host-notify features' serie to only focus on the SMBus Host-Notify feature.
It should be applied with "[PATCH] i2c: add binding to mark a bus as SMBus"
from Wolfram which defines the newly introduced "smbus" binding.

Alain Volmat (2):
  i2c: smbus: add core function handling SMBus host-notify
  i2c: stm32f7: Add SMBus Host-Notify protocol support

 drivers/i2c/busses/Kconfig       |   1 +
 drivers/i2c/busses/i2c-stm32f7.c | 110 +++++++++++++++++++++++++++++++------
 drivers/i2c/i2c-core-smbus.c     | 114 +++++++++++++++++++++++++++++++++++++++
 include/linux/i2c-smbus.h        |  12 +++++
 4 files changed, 222 insertions(+), 15 deletions(-)

-- 
v2: fix a bad test within the i2c-stm32f7 driver leading to decrease of
    available slave slot

[PATCH v2 0/2] i2c: stm32: add host-notify support via i2c slave

[Alain Volmat]

This serie replaces the previous 'stm32-f7: Addition of SMBus Alert /
Host-notify features' serie to only focus on the SMBus Host-Notify feature.
It should be applied with "[PATCH] i2c: add binding to mark a bus as SMBus"
from Wolfram which defines the newly introduced "smbus" binding.

Alain Volmat (2):
  i2c: smbus: add core function handling SMBus host-notify
  i2c: stm32f7: Add SMBus Host-Notify protocol support

 drivers/i2c/busses/Kconfig       |   1 +
 drivers/i2c/busses/i2c-stm32f7.c | 110 +++++++++++++++++++++++++++++++------
 drivers/i2c/i2c-core-smbus.c     | 114 +++++++++++++++++++++++++++++++++++++++
 include/linux/i2c-smbus.h        |  12 +++++
 4 files changed, 222 insertions(+), 15 deletions(-)

-- 
v2: fix a bad test within the i2c-stm32f7 driver leading to decrease of
    available slave slot

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH v2 1/2] i2c: smbus: add core function handling SMBus host-notify

[Alain Volmat]

SMBus Host-Notify protocol, from the adapter point of view
consist of receiving a message from a client, including the
client address and some other data.

It can be simply handled by creating a new slave device
and registering a callback performing the parsing of the
message received from the client.

This commit introduces two new core functions
  * i2c_new_slave_host_notify_device
  * i2c_free_slave_host_notify_device
that take care of registration of the new slave device and
callback and will call i2c_handle_smbus_host_notify once a
Host-Notify event is received.

Signed-off-by: Alain Volmat <alain.volmat@st.com>
---
 v2: identical to v1

 drivers/i2c/i2c-core-smbus.c | 114 +++++++++++++++++++++++++++++++++++++++++++
 include/linux/i2c-smbus.h    |  12 +++++
 2 files changed, 126 insertions(+)

diff --git a/drivers/i2c/i2c-core-smbus.c b/drivers/i2c/i2c-core-smbus.c
index f5c9787992e9..23ab9dc5ac85 100644
--- a/drivers/i2c/i2c-core-smbus.c
+++ b/drivers/i2c/i2c-core-smbus.c
@@ -715,3 +715,117 @@ int of_i2c_setup_smbus_alert(struct i2c_adapter *adapter)
 }
 EXPORT_SYMBOL_GPL(of_i2c_setup_smbus_alert);
 #endif
+
+#if IS_ENABLED(CONFIG_I2C_SLAVE)
+#define SMBUS_HOST_NOTIFY_LEN	3
+struct i2c_slave_host_notify_status {
+	u8 index;
+	u8 addr;
+};
+
+static int i2c_slave_host_notify_cb(struct i2c_client *client,
+				    enum i2c_slave_event event, u8 *val)
+{
+	struct i2c_slave_host_notify_status *status = client->dev.platform_data;
+	int ret;
+
+	switch (event) {
+	case I2C_SLAVE_WRITE_REQUESTED:
+		status->index = 0;
+		break;
+	case I2C_SLAVE_WRITE_RECEIVED:
+		/* We only retrieve the first byte received (addr)
+		 * since there is currently no support to retrieve the data
+		 * parameter from the client.
+		 */
+		if (status->index == 0)
+			status->addr = *val;
+		if (status->index < U8_MAX)
+			status->index++;
+		break;
+	case I2C_SLAVE_STOP:
+		/* Handle host-notify if whole message received only */
+		if (status->index != SMBUS_HOST_NOTIFY_LEN) {
+			status->index = U8_MAX;
+			break;
+		}
+
+		ret = i2c_handle_smbus_host_notify(client->adapter,
+						   status->addr);
+		if (ret < 0)
+			return ret;
+		status->index = U8_MAX;
+		break;
+	case I2C_SLAVE_READ_REQUESTED:
+	case I2C_SLAVE_READ_PROCESSED:
+		*val = 0xff;
+		break;
+	}
+
+	return 0;
+}
+
+/**
+ * i2c_new_slave_host_notify_device - get a client for SMBus host-notify support
+ * @adapter: the target adapter
+ * Context: can sleep
+ *
+ * Setup handling of the SMBus host-notify protocol on a given I2C bus segment.
+ *
+ * Handling is done by creating a device and its callback and handling data
+ * received via the SMBus host-notify address (0x8)
+ *
+ * This returns the client, which should be ultimately freed using
+ * i2c_free_slave_host_notify_device(); or an ERRPTR to indicate an error.
+ */
+struct i2c_client *i2c_new_slave_host_notify_device(struct i2c_adapter *adapter)
+{
+	struct i2c_board_info host_notify_board_info = {
+		I2C_BOARD_INFO("smbus_host_notify", 0x08),
+		.flags  = I2C_CLIENT_SLAVE,
+	};
+	struct i2c_slave_host_notify_status *status;
+	struct i2c_client *client;
+	int ret;
+
+	status = kzalloc(sizeof(struct i2c_slave_host_notify_status),
+			 GFP_KERNEL);
+	if (!status)
+		return ERR_PTR(-ENOMEM);
+	status->index = U8_MAX;
+
+	host_notify_board_info.platform_data = status;
+
+	client = i2c_new_client_device(adapter, &host_notify_board_info);
+	if (IS_ERR(client)) {
+		kfree(status);
+		return client;
+	}
+
+	ret = i2c_slave_register(client, i2c_slave_host_notify_cb);
+	if (ret) {
+		i2c_unregister_device(client);
+		kfree(status);
+		return ERR_PTR(ret);
+	}
+
+	return client;
+}
+EXPORT_SYMBOL_GPL(i2c_new_slave_host_notify_device);
+
+/**
+ * i2c_free_slave_host_notify_device - free the client for SMBus host-notify
+ * support
+ * @client: the client to free
+ * Context: can sleep
+ *
+ * Free the i2c_client allocated via i2c_new_slave_host_notify_device
+ */
+void i2c_free_slave_host_notify_device(struct i2c_client *client)
+{
+	i2c_slave_unregister(client);
+	kfree(client->dev.platform_data);
+	i2c_unregister_device(client);
+}
+EXPORT_SYMBOL_GPL(i2c_free_slave_host_notify_device);
+#endif
diff --git a/include/linux/i2c-smbus.h b/include/linux/i2c-smbus.h
index 1e4e0de4ef8b..52e62f398f1c 100644
--- a/include/linux/i2c-smbus.h
+++ b/include/linux/i2c-smbus.h
@@ -38,6 +38,18 @@ static inline int of_i2c_setup_smbus_alert(struct i2c_adapter *adap)
 	return 0;
 }
 #endif
+#if IS_ENABLED(CONFIG_I2C_SLAVE)
+struct i2c_client *i2c_new_slave_host_notify_device(struct i2c_adapter *adapter);
+void i2c_free_slave_host_notify_device(struct i2c_client *client);
+#else
+static inline struct i2c_client *i2c_new_slave_host_notify_device(struct i2c_adapter *adapter)
+{
+	return NULL;
+}
+static inline void i2c_free_slave_host_notify_device(struct i2c_client *client)
+{
+}
+#endif
 
 #if IS_ENABLED(CONFIG_I2C_SMBUS) && IS_ENABLED(CONFIG_DMI)
 void i2c_register_spd(struct i2c_adapter *adap);
-- 
2.7.4

[PATCH v2 1/2] i2c: smbus: add core function handling SMBus host-notify

[Alain Volmat]

SMBus Host-Notify protocol, from the adapter point of view
consist of receiving a message from a client, including the
client address and some other data.

It can be simply handled by creating a new slave device
and registering a callback performing the parsing of the
message received from the client.

This commit introduces two new core functions
  * i2c_new_slave_host_notify_device
  * i2c_free_slave_host_notify_device
that take care of registration of the new slave device and
callback and will call i2c_handle_smbus_host_notify once a
Host-Notify event is received.

Signed-off-by: Alain Volmat <alain.volmat@st.com>
---
 v2: identical to v1

 drivers/i2c/i2c-core-smbus.c | 114 +++++++++++++++++++++++++++++++++++++++++++
 include/linux/i2c-smbus.h    |  12 +++++
 2 files changed, 126 insertions(+)

diff --git a/drivers/i2c/i2c-core-smbus.c b/drivers/i2c/i2c-core-smbus.c
index f5c9787992e9..23ab9dc5ac85 100644
--- a/drivers/i2c/i2c-core-smbus.c
+++ b/drivers/i2c/i2c-core-smbus.c
@@ -715,3 +715,117 @@ int of_i2c_setup_smbus_alert(struct i2c_adapter *adapter)
 }
 EXPORT_SYMBOL_GPL(of_i2c_setup_smbus_alert);
 #endif
+
+#if IS_ENABLED(CONFIG_I2C_SLAVE)
+#define SMBUS_HOST_NOTIFY_LEN	3
+struct i2c_slave_host_notify_status {
+	u8 index;
+	u8 addr;
+};
+
+static int i2c_slave_host_notify_cb(struct i2c_client *client,
+				    enum i2c_slave_event event, u8 *val)
+{
+	struct i2c_slave_host_notify_status *status = client->dev.platform_data;
+	int ret;
+
+	switch (event) {
+	case I2C_SLAVE_WRITE_REQUESTED:
+		status->index = 0;
+		break;
+	case I2C_SLAVE_WRITE_RECEIVED:
+		/* We only retrieve the first byte received (addr)
+		 * since there is currently no support to retrieve the data
+		 * parameter from the client.
+		 */
+		if (status->index == 0)
+			status->addr = *val;
+		if (status->index < U8_MAX)
+			status->index++;
+		break;
+	case I2C_SLAVE_STOP:
+		/* Handle host-notify if whole message received only */
+		if (status->index != SMBUS_HOST_NOTIFY_LEN) {
+			status->index = U8_MAX;
+			break;
+		}
+
+		ret = i2c_handle_smbus_host_notify(client->adapter,
+						   status->addr);
+		if (ret < 0)
+			return ret;
+		status->index = U8_MAX;
+		break;
+	case I2C_SLAVE_READ_REQUESTED:
+	case I2C_SLAVE_READ_PROCESSED:
+		*val = 0xff;
+		break;
+	}
+
+	return 0;
+}
+
+/**
+ * i2c_new_slave_host_notify_device - get a client for SMBus host-notify support
+ * @adapter: the target adapter
+ * Context: can sleep
+ *
+ * Setup handling of the SMBus host-notify protocol on a given I2C bus segment.
+ *
+ * Handling is done by creating a device and its callback and handling data
+ * received via the SMBus host-notify address (0x8)
+ *
+ * This returns the client, which should be ultimately freed using
+ * i2c_free_slave_host_notify_device(); or an ERRPTR to indicate an error.
+ */
+struct i2c_client *i2c_new_slave_host_notify_device(struct i2c_adapter *adapter)
+{
+	struct i2c_board_info host_notify_board_info = {
+		I2C_BOARD_INFO("smbus_host_notify", 0x08),
+		.flags  = I2C_CLIENT_SLAVE,
+	};
+	struct i2c_slave_host_notify_status *status;
+	struct i2c_client *client;
+	int ret;
+
+	status = kzalloc(sizeof(struct i2c_slave_host_notify_status),
+			 GFP_KERNEL);
+	if (!status)
+		return ERR_PTR(-ENOMEM);
+	status->index = U8_MAX;
+
+	host_notify_board_info.platform_data = status;
+
+	client = i2c_new_client_device(adapter, &host_notify_board_info);
+	if (IS_ERR(client)) {
+		kfree(status);
+		return client;
+	}
+
+	ret = i2c_slave_register(client, i2c_slave_host_notify_cb);
+	if (ret) {
+		i2c_unregister_device(client);
+		kfree(status);
+		return ERR_PTR(ret);
+	}
+
+	return client;
+}
+EXPORT_SYMBOL_GPL(i2c_new_slave_host_notify_device);
+
+/**
+ * i2c_free_slave_host_notify_device - free the client for SMBus host-notify
+ * support
+ * @client: the client to free
+ * Context: can sleep
+ *
+ * Free the i2c_client allocated via i2c_new_slave_host_notify_device
+ */
+void i2c_free_slave_host_notify_device(struct i2c_client *client)
+{
+	i2c_slave_unregister(client);
+	kfree(client->dev.platform_data);
+	i2c_unregister_device(client);
+}
+EXPORT_SYMBOL_GPL(i2c_free_slave_host_notify_device);
+#endif
diff --git a/include/linux/i2c-smbus.h b/include/linux/i2c-smbus.h
index 1e4e0de4ef8b..52e62f398f1c 100644
--- a/include/linux/i2c-smbus.h
+++ b/include/linux/i2c-smbus.h
@@ -38,6 +38,18 @@ static inline int of_i2c_setup_smbus_alert(struct i2c_adapter *adap)
 	return 0;
 }
 #endif
+#if IS_ENABLED(CONFIG_I2C_SLAVE)
+struct i2c_client *i2c_new_slave_host_notify_device(struct i2c_adapter *adapter);
+void i2c_free_slave_host_notify_device(struct i2c_client *client);
+#else
+static inline struct i2c_client *i2c_new_slave_host_notify_device(struct i2c_adapter *adapter)
+{
+	return NULL;
+}
+static inline void i2c_free_slave_host_notify_device(struct i2c_client *client)
+{
+}
+#endif
 
 #if IS_ENABLED(CONFIG_I2C_SMBUS) && IS_ENABLED(CONFIG_DMI)
 void i2c_register_spd(struct i2c_adapter *adap);
-- 
2.7.4


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH v2 2/2] i2c: stm32f7: Add SMBus Host-Notify protocol support

[Alain Volmat]

Rely on the core functions to implement the host-notify
protocol via the a I2C slave device.

Signed-off-by: Alain Volmat <alain.volmat@st.com>
---
 v2: fix slot #0 usage condition within stm32f7_i2c_get_free_slave_id

 drivers/i2c/busses/Kconfig       |   1 +
 drivers/i2c/busses/i2c-stm32f7.c | 110 +++++++++++++++++++++++++++++++++------
 2 files changed, 96 insertions(+), 15 deletions(-)

diff --git a/drivers/i2c/busses/Kconfig b/drivers/i2c/busses/Kconfig
index 735bf31a3fdf..ae8671727a4c 100644
--- a/drivers/i2c/busses/Kconfig
+++ b/drivers/i2c/busses/Kconfig
@@ -1036,6 +1036,7 @@ config I2C_STM32F7
 	tristate "STMicroelectronics STM32F7 I2C support"
 	depends on ARCH_STM32 || COMPILE_TEST
 	select I2C_SLAVE
+	select I2C_SMBUS
 	help
 	  Enable this option to add support for STM32 I2C controller embedded
 	  in STM32F7 SoCs.
diff --git a/drivers/i2c/busses/i2c-stm32f7.c b/drivers/i2c/busses/i2c-stm32f7.c
index bff3479fe122..223c238c3c09 100644
--- a/drivers/i2c/busses/i2c-stm32f7.c
+++ b/drivers/i2c/busses/i2c-stm32f7.c
@@ -18,6 +18,7 @@
 #include <linux/delay.h>
 #include <linux/err.h>
 #include <linux/i2c.h>
+#include <linux/i2c-smbus.h>
 #include <linux/interrupt.h>
 #include <linux/io.h>
 #include <linux/iopoll.h>
@@ -50,6 +51,7 @@
 
 /* STM32F7 I2C control 1 */
 #define STM32F7_I2C_CR1_PECEN			BIT(23)
+#define STM32F7_I2C_CR1_SMBHEN			BIT(20)
 #define STM32F7_I2C_CR1_WUPEN			BIT(18)
 #define STM32F7_I2C_CR1_SBC			BIT(16)
 #define STM32F7_I2C_CR1_RXDMAEN			BIT(15)
@@ -150,7 +152,7 @@
 
 #define STM32F7_I2C_MAX_LEN			0xff
 #define STM32F7_I2C_DMA_LEN_MIN			0x16
-#define STM32F7_I2C_MAX_SLAVE			0x2
+#define STM32F7_I2C_MAX_SLAVE			0x3
 
 #define STM32F7_I2C_DNF_DEFAULT			0
 #define STM32F7_I2C_DNF_MAX			16
@@ -301,6 +303,8 @@ struct stm32f7_i2c_msg {
  * @fmp_creg: register address for clearing Fast Mode Plus bits
  * @fmp_mask: mask for Fast Mode Plus bits in set register
  * @wakeup_src: boolean to know if the device is a wakeup source
+ * @smbus_mode: states that the controller is configured in SMBus mode
+ * @host_notify_client: SMBus host-notify client
  */
 struct stm32f7_i2c_dev {
 	struct i2c_adapter adap;
@@ -327,6 +331,8 @@ struct stm32f7_i2c_dev {
 	u32 fmp_creg;
 	u32 fmp_mask;
 	bool wakeup_src;
+	bool smbus_mode;
+	struct i2c_client *host_notify_client;
 };
 
 /*
@@ -1321,10 +1327,18 @@ static int stm32f7_i2c_get_free_slave_id(struct stm32f7_i2c_dev *i2c_dev,
 	int i;
 
 	/*
-	 * slave[0] supports 7-bit and 10-bit slave address
-	 * slave[1] supports 7-bit slave address only
+	 * slave[0] support only SMBus Host address (0x8)
+	 * slave[1] supports 7-bit and 10-bit slave address
+	 * slave[2] supports 7-bit slave address only
 	 */
-	for (i = STM32F7_I2C_MAX_SLAVE - 1; i >= 0; i--) {
+	if (i2c_dev->smbus_mode && (slave->addr == 0x08)) {
+		if (i2c_dev->slave[0])
+			goto fail;
+		*id = 0;
+		return 0;
+	}
+
+	for (i = STM32F7_I2C_MAX_SLAVE - 1; i > 0; i--) {
 		if (i == 1 && (slave->flags & I2C_CLIENT_TEN))
 			continue;
 		if (!i2c_dev->slave[i]) {
@@ -1333,6 +1347,7 @@ static int stm32f7_i2c_get_free_slave_id(struct stm32f7_i2c_dev *i2c_dev,
 		}
 	}
 
+fail:
 	dev_err(dev, "Slave 0x%x could not be registered\n", slave->addr);
 
 	return -EINVAL;
@@ -1776,7 +1791,13 @@ static int stm32f7_i2c_reg_slave(struct i2c_client *slave)
 	if (!stm32f7_i2c_is_slave_registered(i2c_dev))
 		stm32f7_i2c_enable_wakeup(i2c_dev, true);
 
-	if (id == 0) {
+	switch (id) {
+	case 0:
+		/* Slave SMBus Host */
+		i2c_dev->slave[id] = slave;
+		break;
+
+	case 1:
 		/* Configure Own Address 1 */
 		oar1 = readl_relaxed(i2c_dev->base + STM32F7_I2C_OAR1);
 		oar1 &= ~STM32F7_I2C_OAR1_MASK;
@@ -1789,7 +1810,9 @@ static int stm32f7_i2c_reg_slave(struct i2c_client *slave)
 		oar1 |= STM32F7_I2C_OAR1_OA1EN;
 		i2c_dev->slave[id] = slave;
 		writel_relaxed(oar1, i2c_dev->base + STM32F7_I2C_OAR1);
-	} else if (id == 1) {
+		break;
+
+	case 2:
 		/* Configure Own Address 2 */
 		oar2 = readl_relaxed(i2c_dev->base + STM32F7_I2C_OAR2);
 		oar2 &= ~STM32F7_I2C_OAR2_MASK;
@@ -1802,7 +1825,10 @@ static int stm32f7_i2c_reg_slave(struct i2c_client *slave)
 		oar2 |= STM32F7_I2C_OAR2_OA2EN;
 		i2c_dev->slave[id] = slave;
 		writel_relaxed(oar2, i2c_dev->base + STM32F7_I2C_OAR2);
-	} else {
+		break;
+
+	default:
+		dev_err(dev, "I2C slave id not supported\n");
 		ret = -ENODEV;
 		goto pm_free;
 	}
@@ -1843,10 +1869,10 @@ static int stm32f7_i2c_unreg_slave(struct i2c_client *slave)
 	if (ret < 0)
 		return ret;
 
-	if (id == 0) {
+	if (id == 1) {
 		mask = STM32F7_I2C_OAR1_OA1EN;
 		stm32f7_i2c_clr_bits(base + STM32F7_I2C_OAR1, mask);
-	} else {
+	} else if (id == 2) {
 		mask = STM32F7_I2C_OAR2_OA2EN;
 		stm32f7_i2c_clr_bits(base + STM32F7_I2C_OAR2, mask);
 	}
@@ -1911,14 +1937,51 @@ static int stm32f7_i2c_setup_fm_plus_bits(struct platform_device *pdev,
 					  &i2c_dev->fmp_mask);
 }
 
+static int stm32f7_i2c_enable_smbus_host(struct stm32f7_i2c_dev *i2c_dev)
+{
+	struct i2c_adapter *adap = &i2c_dev->adap;
+	void __iomem *base = i2c_dev->base;
+	struct i2c_client *client;
+
+	client = i2c_new_slave_host_notify_device(adap);
+	if (IS_ERR(client))
+		return PTR_ERR(client);
+
+	i2c_dev->host_notify_client = client;
+
+	/* Enable SMBus Host address */
+	stm32f7_i2c_set_bits(base + STM32F7_I2C_CR1, STM32F7_I2C_CR1_SMBHEN);
+
+	return 0;
+}
+
+static void stm32f7_i2c_disable_smbus_host(struct stm32f7_i2c_dev *i2c_dev)
+{
+	void __iomem *base = i2c_dev->base;
+
+	if (i2c_dev->host_notify_client) {
+		/* Disable SMBus Host address */
+		stm32f7_i2c_clr_bits(base + STM32F7_I2C_CR1,
+				     STM32F7_I2C_CR1_SMBHEN);
+		i2c_free_slave_host_notify_device(i2c_dev->host_notify_client);
+	}
+}
+
 static u32 stm32f7_i2c_func(struct i2c_adapter *adap)
 {
-	return I2C_FUNC_I2C | I2C_FUNC_10BIT_ADDR | I2C_FUNC_SLAVE |
-		I2C_FUNC_SMBUS_QUICK | I2C_FUNC_SMBUS_BYTE |
-		I2C_FUNC_SMBUS_BYTE_DATA | I2C_FUNC_SMBUS_WORD_DATA |
-		I2C_FUNC_SMBUS_BLOCK_DATA | I2C_FUNC_SMBUS_BLOCK_PROC_CALL |
-		I2C_FUNC_SMBUS_PROC_CALL | I2C_FUNC_SMBUS_PEC |
-		I2C_FUNC_SMBUS_I2C_BLOCK;
+	struct stm32f7_i2c_dev *i2c_dev = i2c_get_adapdata(adap);
+
+	u32 func = I2C_FUNC_I2C | I2C_FUNC_10BIT_ADDR | I2C_FUNC_SLAVE |
+		   I2C_FUNC_SMBUS_QUICK | I2C_FUNC_SMBUS_BYTE |
+		   I2C_FUNC_SMBUS_BYTE_DATA | I2C_FUNC_SMBUS_WORD_DATA |
+		   I2C_FUNC_SMBUS_BLOCK_DATA | I2C_FUNC_SMBUS_BLOCK_PROC_CALL |
+		   I2C_FUNC_SMBUS_PROC_CALL | I2C_FUNC_SMBUS_PEC |
+		   I2C_FUNC_SMBUS_I2C_BLOCK;
+
+	if (i2c_dev->smbus_mode)
+		func |= I2C_FUNC_SMBUS_HOST_NOTIFY;
+
+	return func;
 }
 
 static const struct i2c_algorithm stm32f7_i2c_algo = {
@@ -2084,10 +2147,22 @@ static int stm32f7_i2c_probe(struct platform_device *pdev)
 
 	stm32f7_i2c_hw_config(i2c_dev);
 
+	i2c_dev->smbus_mode = of_property_read_bool(pdev->dev.of_node, "smbus");
+
 	ret = i2c_add_adapter(adap);
 	if (ret)
 		goto pm_disable;
 
+	if (i2c_dev->smbus_mode) {
+		ret = stm32f7_i2c_enable_smbus_host(i2c_dev);
+		if (ret) {
+			dev_err(i2c_dev->dev,
+				"failed to enable SMBus Host-Notify protocol (%d)\n",
+				ret);
+			goto i2c_adapter_remove;
+		}
+	}
+
 	dev_info(i2c_dev->dev, "STM32F7 I2C-%d bus adapter\n", adap->nr);
 
 	pm_runtime_mark_last_busy(i2c_dev->dev);
@@ -2095,6 +2170,9 @@ static int stm32f7_i2c_probe(struct platform_device *pdev)
 
 	return 0;
 
+i2c_adapter_remove:
+	i2c_del_adapter(adap);
+
 pm_disable:
 	pm_runtime_put_noidle(i2c_dev->dev);
 	pm_runtime_disable(i2c_dev->dev);
@@ -2126,6 +2204,8 @@ static int stm32f7_i2c_remove(struct platform_device *pdev)
 {
 	struct stm32f7_i2c_dev *i2c_dev = platform_get_drvdata(pdev);
 
+	stm32f7_i2c_disable_smbus_host(i2c_dev);
+
 	i2c_del_adapter(&i2c_dev->adap);
 	pm_runtime_get_sync(i2c_dev->dev);
 
-- 
2.7.4

[PATCH v2 2/2] i2c: stm32f7: Add SMBus Host-Notify protocol support

[Alain Volmat]

Rely on the core functions to implement the host-notify
protocol via the a I2C slave device.

Signed-off-by: Alain Volmat <alain.volmat@st.com>
---
 v2: fix slot #0 usage condition within stm32f7_i2c_get_free_slave_id

 drivers/i2c/busses/Kconfig       |   1 +
 drivers/i2c/busses/i2c-stm32f7.c | 110 +++++++++++++++++++++++++++++++++------
 2 files changed, 96 insertions(+), 15 deletions(-)

diff --git a/drivers/i2c/busses/Kconfig b/drivers/i2c/busses/Kconfig
index 735bf31a3fdf..ae8671727a4c 100644
--- a/drivers/i2c/busses/Kconfig
+++ b/drivers/i2c/busses/Kconfig
@@ -1036,6 +1036,7 @@ config I2C_STM32F7
 	tristate "STMicroelectronics STM32F7 I2C support"
 	depends on ARCH_STM32 || COMPILE_TEST
 	select I2C_SLAVE
+	select I2C_SMBUS
 	help
 	  Enable this option to add support for STM32 I2C controller embedded
 	  in STM32F7 SoCs.
diff --git a/drivers/i2c/busses/i2c-stm32f7.c b/drivers/i2c/busses/i2c-stm32f7.c
index bff3479fe122..223c238c3c09 100644
--- a/drivers/i2c/busses/i2c-stm32f7.c
+++ b/drivers/i2c/busses/i2c-stm32f7.c
@@ -18,6 +18,7 @@
 #include <linux/delay.h>
 #include <linux/err.h>
 #include <linux/i2c.h>
+#include <linux/i2c-smbus.h>
 #include <linux/interrupt.h>
 #include <linux/io.h>
 #include <linux/iopoll.h>
@@ -50,6 +51,7 @@
 
 /* STM32F7 I2C control 1 */
 #define STM32F7_I2C_CR1_PECEN			BIT(23)
+#define STM32F7_I2C_CR1_SMBHEN			BIT(20)
 #define STM32F7_I2C_CR1_WUPEN			BIT(18)
 #define STM32F7_I2C_CR1_SBC			BIT(16)
 #define STM32F7_I2C_CR1_RXDMAEN			BIT(15)
@@ -150,7 +152,7 @@
 
 #define STM32F7_I2C_MAX_LEN			0xff
 #define STM32F7_I2C_DMA_LEN_MIN			0x16
-#define STM32F7_I2C_MAX_SLAVE			0x2
+#define STM32F7_I2C_MAX_SLAVE			0x3
 
 #define STM32F7_I2C_DNF_DEFAULT			0
 #define STM32F7_I2C_DNF_MAX			16
@@ -301,6 +303,8 @@ struct stm32f7_i2c_msg {
  * @fmp_creg: register address for clearing Fast Mode Plus bits
  * @fmp_mask: mask for Fast Mode Plus bits in set register
  * @wakeup_src: boolean to know if the device is a wakeup source
+ * @smbus_mode: states that the controller is configured in SMBus mode
+ * @host_notify_client: SMBus host-notify client
  */
 struct stm32f7_i2c_dev {
 	struct i2c_adapter adap;
@@ -327,6 +331,8 @@ struct stm32f7_i2c_dev {
 	u32 fmp_creg;
 	u32 fmp_mask;
 	bool wakeup_src;
+	bool smbus_mode;
+	struct i2c_client *host_notify_client;
 };
 
 /*
@@ -1321,10 +1327,18 @@ static int stm32f7_i2c_get_free_slave_id(struct stm32f7_i2c_dev *i2c_dev,
 	int i;
 
 	/*
-	 * slave[0] supports 7-bit and 10-bit slave address
-	 * slave[1] supports 7-bit slave address only
+	 * slave[0] support only SMBus Host address (0x8)
+	 * slave[1] supports 7-bit and 10-bit slave address
+	 * slave[2] supports 7-bit slave address only
 	 */
-	for (i = STM32F7_I2C_MAX_SLAVE - 1; i >= 0; i--) {
+	if (i2c_dev->smbus_mode && (slave->addr == 0x08)) {
+		if (i2c_dev->slave[0])
+			goto fail;
+		*id = 0;
+		return 0;
+	}
+
+	for (i = STM32F7_I2C_MAX_SLAVE - 1; i > 0; i--) {
 		if (i == 1 && (slave->flags & I2C_CLIENT_TEN))
 			continue;
 		if (!i2c_dev->slave[i]) {
@@ -1333,6 +1347,7 @@ static int stm32f7_i2c_get_free_slave_id(struct stm32f7_i2c_dev *i2c_dev,
 		}
 	}
 
+fail:
 	dev_err(dev, "Slave 0x%x could not be registered\n", slave->addr);
 
 	return -EINVAL;
@@ -1776,7 +1791,13 @@ static int stm32f7_i2c_reg_slave(struct i2c_client *slave)
 	if (!stm32f7_i2c_is_slave_registered(i2c_dev))
 		stm32f7_i2c_enable_wakeup(i2c_dev, true);
 
-	if (id == 0) {
+	switch (id) {
+	case 0:
+		/* Slave SMBus Host */
+		i2c_dev->slave[id] = slave;
+		break;
+
+	case 1:
 		/* Configure Own Address 1 */
 		oar1 = readl_relaxed(i2c_dev->base + STM32F7_I2C_OAR1);
 		oar1 &= ~STM32F7_I2C_OAR1_MASK;
@@ -1789,7 +1810,9 @@ static int stm32f7_i2c_reg_slave(struct i2c_client *slave)
 		oar1 |= STM32F7_I2C_OAR1_OA1EN;
 		i2c_dev->slave[id] = slave;
 		writel_relaxed(oar1, i2c_dev->base + STM32F7_I2C_OAR1);
-	} else if (id == 1) {
+		break;
+
+	case 2:
 		/* Configure Own Address 2 */
 		oar2 = readl_relaxed(i2c_dev->base + STM32F7_I2C_OAR2);
 		oar2 &= ~STM32F7_I2C_OAR2_MASK;
@@ -1802,7 +1825,10 @@ static int stm32f7_i2c_reg_slave(struct i2c_client *slave)
 		oar2 |= STM32F7_I2C_OAR2_OA2EN;
 		i2c_dev->slave[id] = slave;
 		writel_relaxed(oar2, i2c_dev->base + STM32F7_I2C_OAR2);
-	} else {
+		break;
+
+	default:
+		dev_err(dev, "I2C slave id not supported\n");
 		ret = -ENODEV;
 		goto pm_free;
 	}
@@ -1843,10 +1869,10 @@ static int stm32f7_i2c_unreg_slave(struct i2c_client *slave)
 	if (ret < 0)
 		return ret;
 
-	if (id == 0) {
+	if (id == 1) {
 		mask = STM32F7_I2C_OAR1_OA1EN;
 		stm32f7_i2c_clr_bits(base + STM32F7_I2C_OAR1, mask);
-	} else {
+	} else if (id == 2) {
 		mask = STM32F7_I2C_OAR2_OA2EN;
 		stm32f7_i2c_clr_bits(base + STM32F7_I2C_OAR2, mask);
 	}
@@ -1911,14 +1937,51 @@ static int stm32f7_i2c_setup_fm_plus_bits(struct platform_device *pdev,
 					  &i2c_dev->fmp_mask);
 }
 
+static int stm32f7_i2c_enable_smbus_host(struct stm32f7_i2c_dev *i2c_dev)
+{
+	struct i2c_adapter *adap = &i2c_dev->adap;
+	void __iomem *base = i2c_dev->base;
+	struct i2c_client *client;
+
+	client = i2c_new_slave_host_notify_device(adap);
+	if (IS_ERR(client))
+		return PTR_ERR(client);
+
+	i2c_dev->host_notify_client = client;
+
+	/* Enable SMBus Host address */
+	stm32f7_i2c_set_bits(base + STM32F7_I2C_CR1, STM32F7_I2C_CR1_SMBHEN);
+
+	return 0;
+}
+
+static void stm32f7_i2c_disable_smbus_host(struct stm32f7_i2c_dev *i2c_dev)
+{
+	void __iomem *base = i2c_dev->base;
+
+	if (i2c_dev->host_notify_client) {
+		/* Disable SMBus Host address */
+		stm32f7_i2c_clr_bits(base + STM32F7_I2C_CR1,
+				     STM32F7_I2C_CR1_SMBHEN);
+		i2c_free_slave_host_notify_device(i2c_dev->host_notify_client);
+	}
+}
+
 static u32 stm32f7_i2c_func(struct i2c_adapter *adap)
 {
-	return I2C_FUNC_I2C | I2C_FUNC_10BIT_ADDR | I2C_FUNC_SLAVE |
-		I2C_FUNC_SMBUS_QUICK | I2C_FUNC_SMBUS_BYTE |
-		I2C_FUNC_SMBUS_BYTE_DATA | I2C_FUNC_SMBUS_WORD_DATA |
-		I2C_FUNC_SMBUS_BLOCK_DATA | I2C_FUNC_SMBUS_BLOCK_PROC_CALL |
-		I2C_FUNC_SMBUS_PROC_CALL | I2C_FUNC_SMBUS_PEC |
-		I2C_FUNC_SMBUS_I2C_BLOCK;
+	struct stm32f7_i2c_dev *i2c_dev = i2c_get_adapdata(adap);
+
+	u32 func = I2C_FUNC_I2C | I2C_FUNC_10BIT_ADDR | I2C_FUNC_SLAVE |
+		   I2C_FUNC_SMBUS_QUICK | I2C_FUNC_SMBUS_BYTE |
+		   I2C_FUNC_SMBUS_BYTE_DATA | I2C_FUNC_SMBUS_WORD_DATA |
+		   I2C_FUNC_SMBUS_BLOCK_DATA | I2C_FUNC_SMBUS_BLOCK_PROC_CALL |
+		   I2C_FUNC_SMBUS_PROC_CALL | I2C_FUNC_SMBUS_PEC |
+		   I2C_FUNC_SMBUS_I2C_BLOCK;
+
+	if (i2c_dev->smbus_mode)
+		func |= I2C_FUNC_SMBUS_HOST_NOTIFY;
+
+	return func;
 }
 
 static const struct i2c_algorithm stm32f7_i2c_algo = {
@@ -2084,10 +2147,22 @@ static int stm32f7_i2c_probe(struct platform_device *pdev)
 
 	stm32f7_i2c_hw_config(i2c_dev);
 
+	i2c_dev->smbus_mode = of_property_read_bool(pdev->dev.of_node, "smbus");
+
 	ret = i2c_add_adapter(adap);
 	if (ret)
 		goto pm_disable;
 
+	if (i2c_dev->smbus_mode) {
+		ret = stm32f7_i2c_enable_smbus_host(i2c_dev);
+		if (ret) {
+			dev_err(i2c_dev->dev,
+				"failed to enable SMBus Host-Notify protocol (%d)\n",
+				ret);
+			goto i2c_adapter_remove;
+		}
+	}
+
 	dev_info(i2c_dev->dev, "STM32F7 I2C-%d bus adapter\n", adap->nr);
 
 	pm_runtime_mark_last_busy(i2c_dev->dev);
@@ -2095,6 +2170,9 @@ static int stm32f7_i2c_probe(struct platform_device *pdev)
 
 	return 0;
 
+i2c_adapter_remove:
+	i2c_del_adapter(adap);
+
 pm_disable:
 	pm_runtime_put_noidle(i2c_dev->dev);
 	pm_runtime_disable(i2c_dev->dev);
@@ -2126,6 +2204,8 @@ static int stm32f7_i2c_remove(struct platform_device *pdev)
 {
 	struct stm32f7_i2c_dev *i2c_dev = platform_get_drvdata(pdev);
 
+	stm32f7_i2c_disable_smbus_host(i2c_dev);
+
 	i2c_del_adapter(&i2c_dev->adap);
 	pm_runtime_get_sync(i2c_dev->dev);
 
-- 
2.7.4


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Re: [PATCH v2 1/2] i2c: smbus: add core function handling SMBus host-notify

[Wolfram Sang]

[-- Attachment #1: Type: text/plain, Size: 6866 bytes --]

Hi Alain,

some more comments for this one. I hope to come to a conclusion with Rob
regarding the binding for patch 2, so we are then ready to go.

On Fri, Jul 03, 2020 at 01:36:07PM +0200, Alain Volmat wrote:
> SMBus Host-Notify protocol, from the adapter point of view
> consist of receiving a message from a client, including the
> client address and some other data.
> 
> It can be simply handled by creating a new slave device
> and registering a callback performing the parsing of the
> message received from the client.
> 
> This commit introduces two new core functions
>   * i2c_new_slave_host_notify_device
>   * i2c_free_slave_host_notify_device
> that take care of registration of the new slave device and
> callback and will call i2c_handle_smbus_host_notify once a
> Host-Notify event is received.
> 
> Signed-off-by: Alain Volmat <alain.volmat@st.com>
> ---
>  v2: identical to v1
> 
>  drivers/i2c/i2c-core-smbus.c | 114 +++++++++++++++++++++++++++++++++++++++++++

I came to the conclusion that this code should be in i2c-smbus.c.
Because it is SMBus only. I agree that the current code layout is
confusing. I will try to move the whole host-notify support to i2c-smbus
in the next cycle.

Yes, that means that one needs to select I2C_SMBUS in the config, too
(unless you want to 'select' it with your driver). But most people won't
need it so they can compile it away. This is what I2C_SMBUS is for.

>  include/linux/i2c-smbus.h    |  12 +++++
>  2 files changed, 126 insertions(+)
> 
> diff --git a/drivers/i2c/i2c-core-smbus.c b/drivers/i2c/i2c-core-smbus.c
> index f5c9787992e9..23ab9dc5ac85 100644
> --- a/drivers/i2c/i2c-core-smbus.c
> +++ b/drivers/i2c/i2c-core-smbus.c
> @@ -715,3 +715,117 @@ int of_i2c_setup_smbus_alert(struct i2c_adapter *adapter)
>  }
>  EXPORT_SYMBOL_GPL(of_i2c_setup_smbus_alert);
>  #endif
> +
> +#if IS_ENABLED(CONFIG_I2C_SLAVE)
> +#define SMBUS_HOST_NOTIFY_LEN	3
> +struct i2c_slave_host_notify_status {
> +	u8 index;
> +	u8 addr;
> +};
> +
> +static int i2c_slave_host_notify_cb(struct i2c_client *client,
> +				    enum i2c_slave_event event, u8 *val)
> +{
> +	struct i2c_slave_host_notify_status *status = client->dev.platform_data;
> +	int ret;
> +

Can't we simplify 'index' handling similar to the testunit driver...

> +	switch (event) {
> +	case I2C_SLAVE_WRITE_REQUESTED:
> +		status->index = 0;

... by removing this line...

> +		break;
> +	case I2C_SLAVE_WRITE_RECEIVED:
> +		/* We only retrieve the first byte received (addr)
> +		 * since there is currently no support to retrieve the data
> +		 * parameter from the client.
> +		 */
> +		if (status->index == 0)
> +			status->addr = *val;
> +		if (status->index < U8_MAX)
> +			status->index++;
> +		break;
> +	case I2C_SLAVE_STOP:
> +		/* Handle host-notify if whole message received only */
> +		if (status->index != SMBUS_HOST_NOTIFY_LEN) {
> +			status->index = U8_MAX;
> +			break;
> +		}
> +
> +		ret = i2c_handle_smbus_host_notify(client->adapter,
> +						   status->addr);
> +		if (ret < 0)
> +			return ret;
> +		status->index = U8_MAX;

... and handling the logic here like:

+		if (status->index == SMBUS_HOST_NOTIFY_LEN)
+			i2c_handle_smbus_host_notify(client->adapter, status->addr);
+		status->index = 0;

Note that I2C_SLAVE_STOP doesn't return a retval, so we don't need to check
i2c_handle_smbus_host_notify().

> +		break;
> +	case I2C_SLAVE_READ_REQUESTED:
> +	case I2C_SLAVE_READ_PROCESSED:
> +		*val = 0xff;
> +		break;
> +	}
> +
> +	return 0;
> +}
> +
> +/**
> + * i2c_new_slave_host_notify_device - get a client for SMBus host-notify support
> + * @adapter: the target adapter
> + * Context: can sleep
> + *
> + * Setup handling of the SMBus host-notify protocol on a given I2C bus segment.
> + *
> + * Handling is done by creating a device and its callback and handling data
> + * received via the SMBus host-notify address (0x8)
> + *
> + * This returns the client, which should be ultimately freed using
> + * i2c_free_slave_host_notify_device(); or an ERRPTR to indicate an error.
> + */
> +struct i2c_client *i2c_new_slave_host_notify_device(struct i2c_adapter *adapter)
> +{
> +	struct i2c_board_info host_notify_board_info = {
> +		I2C_BOARD_INFO("smbus_host_notify", 0x08),
> +		.flags  = I2C_CLIENT_SLAVE,
> +	};
> +	struct i2c_slave_host_notify_status *status;
> +	struct i2c_client *client;
> +	int ret;
> +
> +	status = kzalloc(sizeof(struct i2c_slave_host_notify_status),
> +			 GFP_KERNEL);
> +	if (!status)
> +		return ERR_PTR(-ENOMEM);
> +	status->index = U8_MAX;

This line could go, too, if my simplification above works.

> +
> +	host_notify_board_info.platform_data = status;
> +
> +	client = i2c_new_client_device(adapter, &host_notify_board_info);
> +	if (IS_ERR(client)) {
> +		kfree(status);
> +		return client;
> +	}
> +
> +	ret = i2c_slave_register(client, i2c_slave_host_notify_cb);
> +	if (ret) {
> +		i2c_unregister_device(client);
> +		kfree(status);
> +		return ERR_PTR(ret);
> +	}
> +
> +	return client;
> +}
> +EXPORT_SYMBOL_GPL(i2c_new_slave_host_notify_device);
> +
> +/**
> + * i2c_free_slave_host_notify_device - free the client for SMBus host-notify
> + * support
> + * @client: the client to free
> + * Context: can sleep
> + *
> + * Free the i2c_client allocated via i2c_new_slave_host_notify_device
> + */
> +void i2c_free_slave_host_notify_device(struct i2c_client *client)
> +{
> +	i2c_slave_unregister(client);
> +	kfree(client->dev.platform_data);
> +	i2c_unregister_device(client);
> +}
> +EXPORT_SYMBOL_GPL(i2c_free_slave_host_notify_device);

Sidenote: With my recent series "i2c: slave: improve sanity checks when
un-/registering" this code became NULL-safe (and IS_ERR safe, too).

> +#endif
> diff --git a/include/linux/i2c-smbus.h b/include/linux/i2c-smbus.h
> index 1e4e0de4ef8b..52e62f398f1c 100644
> --- a/include/linux/i2c-smbus.h
> +++ b/include/linux/i2c-smbus.h
> @@ -38,6 +38,18 @@ static inline int of_i2c_setup_smbus_alert(struct i2c_adapter *adap)
>  	return 0;
>  }
>  #endif
> +#if IS_ENABLED(CONFIG_I2C_SLAVE)
> +struct i2c_client *i2c_new_slave_host_notify_device(struct i2c_adapter *adapter);
> +void i2c_free_slave_host_notify_device(struct i2c_client *client);
> +#else
> +static inline struct i2c_client *i2c_new_slave_host_notify_device(struct i2c_adapter *adapter)
> +{
> +	return NULL;

return ERR_PTR(-ENOSYS);

As the docs say, this function either returns a valid client or an
ERR_PTR.

> +}
> +static inline void i2c_free_slave_host_notify_device(struct i2c_client *client)
> +{
> +}
> +#endif
>  
>  #if IS_ENABLED(CONFIG_I2C_SMBUS) && IS_ENABLED(CONFIG_DMI)
>  void i2c_register_spd(struct i2c_adapter *adap);
> -- 
> 2.7.4
> 

[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 833 bytes --]

Re: [PATCH v2 1/2] i2c: smbus: add core function handling SMBus host-notify

[Wolfram Sang]

[-- Attachment #1.1: Type: text/plain, Size: 6866 bytes --]

Hi Alain,

some more comments for this one. I hope to come to a conclusion with Rob
regarding the binding for patch 2, so we are then ready to go.

On Fri, Jul 03, 2020 at 01:36:07PM +0200, Alain Volmat wrote:
> SMBus Host-Notify protocol, from the adapter point of view
> consist of receiving a message from a client, including the
> client address and some other data.
> 
> It can be simply handled by creating a new slave device
> and registering a callback performing the parsing of the
> message received from the client.
> 
> This commit introduces two new core functions
>   * i2c_new_slave_host_notify_device
>   * i2c_free_slave_host_notify_device
> that take care of registration of the new slave device and
> callback and will call i2c_handle_smbus_host_notify once a
> Host-Notify event is received.
> 
> Signed-off-by: Alain Volmat <alain.volmat@st.com>
> ---
>  v2: identical to v1
> 
>  drivers/i2c/i2c-core-smbus.c | 114 +++++++++++++++++++++++++++++++++++++++++++

I came to the conclusion that this code should be in i2c-smbus.c.
Because it is SMBus only. I agree that the current code layout is
confusing. I will try to move the whole host-notify support to i2c-smbus
in the next cycle.

Yes, that means that one needs to select I2C_SMBUS in the config, too
(unless you want to 'select' it with your driver). But most people won't
need it so they can compile it away. This is what I2C_SMBUS is for.

>  include/linux/i2c-smbus.h    |  12 +++++
>  2 files changed, 126 insertions(+)
> 
> diff --git a/drivers/i2c/i2c-core-smbus.c b/drivers/i2c/i2c-core-smbus.c
> index f5c9787992e9..23ab9dc5ac85 100644
> --- a/drivers/i2c/i2c-core-smbus.c
> +++ b/drivers/i2c/i2c-core-smbus.c
> @@ -715,3 +715,117 @@ int of_i2c_setup_smbus_alert(struct i2c_adapter *adapter)
>  }
>  EXPORT_SYMBOL_GPL(of_i2c_setup_smbus_alert);
>  #endif
> +
> +#if IS_ENABLED(CONFIG_I2C_SLAVE)
> +#define SMBUS_HOST_NOTIFY_LEN	3
> +struct i2c_slave_host_notify_status {
> +	u8 index;
> +	u8 addr;
> +};
> +
> +static int i2c_slave_host_notify_cb(struct i2c_client *client,
> +				    enum i2c_slave_event event, u8 *val)
> +{
> +	struct i2c_slave_host_notify_status *status = client->dev.platform_data;
> +	int ret;
> +

Can't we simplify 'index' handling similar to the testunit driver...

> +	switch (event) {
> +	case I2C_SLAVE_WRITE_REQUESTED:
> +		status->index = 0;

... by removing this line...

> +		break;
> +	case I2C_SLAVE_WRITE_RECEIVED:
> +		/* We only retrieve the first byte received (addr)
> +		 * since there is currently no support to retrieve the data
> +		 * parameter from the client.
> +		 */
> +		if (status->index == 0)
> +			status->addr = *val;
> +		if (status->index < U8_MAX)
> +			status->index++;
> +		break;
> +	case I2C_SLAVE_STOP:
> +		/* Handle host-notify if whole message received only */
> +		if (status->index != SMBUS_HOST_NOTIFY_LEN) {
> +			status->index = U8_MAX;
> +			break;
> +		}
> +
> +		ret = i2c_handle_smbus_host_notify(client->adapter,
> +						   status->addr);
> +		if (ret < 0)
> +			return ret;
> +		status->index = U8_MAX;

... and handling the logic here like:

+		if (status->index == SMBUS_HOST_NOTIFY_LEN)
+			i2c_handle_smbus_host_notify(client->adapter, status->addr);
+		status->index = 0;

Note that I2C_SLAVE_STOP doesn't return a retval, so we don't need to check
i2c_handle_smbus_host_notify().

> +		break;
> +	case I2C_SLAVE_READ_REQUESTED:
> +	case I2C_SLAVE_READ_PROCESSED:
> +		*val = 0xff;
> +		break;
> +	}
> +
> +	return 0;
> +}
> +
> +/**
> + * i2c_new_slave_host_notify_device - get a client for SMBus host-notify support
> + * @adapter: the target adapter
> + * Context: can sleep
> + *
> + * Setup handling of the SMBus host-notify protocol on a given I2C bus segment.
> + *
> + * Handling is done by creating a device and its callback and handling data
> + * received via the SMBus host-notify address (0x8)
> + *
> + * This returns the client, which should be ultimately freed using
> + * i2c_free_slave_host_notify_device(); or an ERRPTR to indicate an error.
> + */
> +struct i2c_client *i2c_new_slave_host_notify_device(struct i2c_adapter *adapter)
> +{
> +	struct i2c_board_info host_notify_board_info = {
> +		I2C_BOARD_INFO("smbus_host_notify", 0x08),
> +		.flags  = I2C_CLIENT_SLAVE,
> +	};
> +	struct i2c_slave_host_notify_status *status;
> +	struct i2c_client *client;
> +	int ret;
> +
> +	status = kzalloc(sizeof(struct i2c_slave_host_notify_status),
> +			 GFP_KERNEL);
> +	if (!status)
> +		return ERR_PTR(-ENOMEM);
> +	status->index = U8_MAX;

This line could go, too, if my simplification above works.

> +
> +	host_notify_board_info.platform_data = status;
> +
> +	client = i2c_new_client_device(adapter, &host_notify_board_info);
> +	if (IS_ERR(client)) {
> +		kfree(status);
> +		return client;
> +	}
> +
> +	ret = i2c_slave_register(client, i2c_slave_host_notify_cb);
> +	if (ret) {
> +		i2c_unregister_device(client);
> +		kfree(status);
> +		return ERR_PTR(ret);
> +	}
> +
> +	return client;
> +}
> +EXPORT_SYMBOL_GPL(i2c_new_slave_host_notify_device);
> +
> +/**
> + * i2c_free_slave_host_notify_device - free the client for SMBus host-notify
> + * support
> + * @client: the client to free
> + * Context: can sleep
> + *
> + * Free the i2c_client allocated via i2c_new_slave_host_notify_device
> + */
> +void i2c_free_slave_host_notify_device(struct i2c_client *client)
> +{
> +	i2c_slave_unregister(client);
> +	kfree(client->dev.platform_data);
> +	i2c_unregister_device(client);
> +}
> +EXPORT_SYMBOL_GPL(i2c_free_slave_host_notify_device);

Sidenote: With my recent series "i2c: slave: improve sanity checks when
un-/registering" this code became NULL-safe (and IS_ERR safe, too).

> +#endif
> diff --git a/include/linux/i2c-smbus.h b/include/linux/i2c-smbus.h
> index 1e4e0de4ef8b..52e62f398f1c 100644
> --- a/include/linux/i2c-smbus.h
> +++ b/include/linux/i2c-smbus.h
> @@ -38,6 +38,18 @@ static inline int of_i2c_setup_smbus_alert(struct i2c_adapter *adap)
>  	return 0;
>  }
>  #endif
> +#if IS_ENABLED(CONFIG_I2C_SLAVE)
> +struct i2c_client *i2c_new_slave_host_notify_device(struct i2c_adapter *adapter);
> +void i2c_free_slave_host_notify_device(struct i2c_client *client);
> +#else
> +static inline struct i2c_client *i2c_new_slave_host_notify_device(struct i2c_adapter *adapter)
> +{
> +	return NULL;

return ERR_PTR(-ENOSYS);

As the docs say, this function either returns a valid client or an
ERR_PTR.

> +}
> +static inline void i2c_free_slave_host_notify_device(struct i2c_client *client)
> +{
> +}
> +#endif
>  
>  #if IS_ENABLED(CONFIG_I2C_SMBUS) && IS_ENABLED(CONFIG_DMI)
>  void i2c_register_spd(struct i2c_adapter *adap);
> -- 
> 2.7.4
> 

[-- Attachment #1.2: signature.asc --]
[-- Type: application/pgp-signature, Size: 833 bytes --]

[-- Attachment #2: Type: text/plain, Size: 176 bytes --]

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Re: [PATCH v2 1/2] i2c: smbus: add core function handling SMBus host-notify

[Wolfram Sang]

[-- Attachment #1: Type: text/plain, Size: 611 bytes --]


> > +void i2c_free_slave_host_notify_device(struct i2c_client *client)
> > +{
> > +	i2c_slave_unregister(client);
> > +	kfree(client->dev.platform_data);
> > +	i2c_unregister_device(client);
> > +}
> > +EXPORT_SYMBOL_GPL(i2c_free_slave_host_notify_device);
> 
> Sidenote: With my recent series "i2c: slave: improve sanity checks when
> un-/registering" this code became NULL-safe (and IS_ERR safe, too).

Stupid me, it is not NULL safe. The functions are. But, we deregister
'client' on our own. It probably makes sense to add some sanity checking
of the parameters of the exported functions.


[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 833 bytes --]

Re: [PATCH v2 1/2] i2c: smbus: add core function handling SMBus host-notify

[Wolfram Sang]

[-- Attachment #1.1: Type: text/plain, Size: 611 bytes --]


> > +void i2c_free_slave_host_notify_device(struct i2c_client *client)
> > +{
> > +	i2c_slave_unregister(client);
> > +	kfree(client->dev.platform_data);
> > +	i2c_unregister_device(client);
> > +}
> > +EXPORT_SYMBOL_GPL(i2c_free_slave_host_notify_device);
> 
> Sidenote: With my recent series "i2c: slave: improve sanity checks when
> un-/registering" this code became NULL-safe (and IS_ERR safe, too).

Stupid me, it is not NULL safe. The functions are. But, we deregister
'client' on our own. It probably makes sense to add some sanity checking
of the parameters of the exported functions.


[-- Attachment #1.2: signature.asc --]
[-- Type: application/pgp-signature, Size: 833 bytes --]

[-- Attachment #2: Type: text/plain, Size: 176 bytes --]

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Re: [PATCH v2 1/2] i2c: smbus: add core function handling SMBus host-notify

[Alain Volmat]

Hi Wolfram,

I've taken your comments and prepared a new serie including them.
I'll wait for the conclusion regarding the bindings before pushing it.
I also have an additional patch ready in order to add again the SMBus Alert
support within the stm32f7 driver since it has been removed from the
current serie. Hopefully I can push it once binding is acked so that it
can get merged also in this cycle.

> > SMBus Host-Notify protocol, from the adapter point of view
> > consist of receiving a message from a client, including the
> > client address and some other data.
> > 
> > It can be simply handled by creating a new slave device
> > and registering a callback performing the parsing of the
> > message received from the client.
> > 
> > This commit introduces two new core functions
> >   * i2c_new_slave_host_notify_device
> >   * i2c_free_slave_host_notify_device
> > that take care of registration of the new slave device and
> > callback and will call i2c_handle_smbus_host_notify once a
> > Host-Notify event is received.
> > 
> > Signed-off-by: Alain Volmat <alain.volmat@st.com>
> > ---
> >  v2: identical to v1
> > 
> >  drivers/i2c/i2c-core-smbus.c | 114 +++++++++++++++++++++++++++++++++++++++++++
> 
> I came to the conclusion that this code should be in i2c-smbus.c.
> Because it is SMBus only. I agree that the current code layout is
> confusing. I will try to move the whole host-notify support to i2c-smbus
> in the next cycle.
> 
> Yes, that means that one needs to select I2C_SMBUS in the config, too
> (unless you want to 'select' it with your driver). But most people won't
> need it so they can compile it away. This is what I2C_SMBUS is for.

Ok, code is now moved into i2c-smbus.c
In case of the stm32f7 anyway I2C_SMBUS was already selected hence there is no
impact.

> > +static int i2c_slave_host_notify_cb(struct i2c_client *client,
> > +				    enum i2c_slave_event event, u8 *val)
> > +{
> > +	struct i2c_slave_host_notify_status *status = client->dev.platform_data;
> > +	int ret;
> > +
> 
> Can't we simplify 'index' handling similar to the testunit driver...
> 
> > +	switch (event) {
> > +	case I2C_SLAVE_WRITE_REQUESTED:
> > +		status->index = 0;
> 
> ... by removing this line...
> 
> > +		break;
> > +	case I2C_SLAVE_WRITE_RECEIVED:
> > +		/* We only retrieve the first byte received (addr)
> > +		 * since there is currently no support to retrieve the data
> > +		 * parameter from the client.
> > +		 */
> > +		if (status->index == 0)
> > +			status->addr = *val;
> > +		if (status->index < U8_MAX)
> > +			status->index++;
> > +		break;
> > +	case I2C_SLAVE_STOP:
> > +		/* Handle host-notify if whole message received only */
> > +		if (status->index != SMBUS_HOST_NOTIFY_LEN) {
> > +			status->index = U8_MAX;
> > +			break;
> > +		}
> > +
> > +		ret = i2c_handle_smbus_host_notify(client->adapter,
> > +						   status->addr);
> > +		if (ret < 0)
> > +			return ret;
> > +		status->index = U8_MAX;
> 
> ... and handling the logic here like:
> 
> +		if (status->index == SMBUS_HOST_NOTIFY_LEN)
> +			i2c_handle_smbus_host_notify(client->adapter, status->addr);
> +		status->index = 0;
> 
> Note that I2C_SLAVE_STOP doesn't return a retval, so we don't need to check
> i2c_handle_smbus_host_notify().
> 
> > +		break;
> > +	case I2C_SLAVE_READ_REQUESTED:
> > +	case I2C_SLAVE_READ_PROCESSED:
> > +		*val = 0xff;
> > +		break;
> > +	}
> > +
> > +	return 0;
> > +}
> > +
> > +/**
> > + * i2c_new_slave_host_notify_device - get a client for SMBus host-notify support
> > + * @adapter: the target adapter
> > + * Context: can sleep
> > + *
> > + * Setup handling of the SMBus host-notify protocol on a given I2C bus segment.
> > + *
> > + * Handling is done by creating a device and its callback and handling data
> > + * received via the SMBus host-notify address (0x8)
> > + *
> > + * This returns the client, which should be ultimately freed using
> > + * i2c_free_slave_host_notify_device(); or an ERRPTR to indicate an error.
> > + */
> > +struct i2c_client *i2c_new_slave_host_notify_device(struct i2c_adapter *adapter)
> > +{
> > +	struct i2c_board_info host_notify_board_info = {
> > +		I2C_BOARD_INFO("smbus_host_notify", 0x08),
> > +		.flags  = I2C_CLIENT_SLAVE,
> > +	};
> > +	struct i2c_slave_host_notify_status *status;
> > +	struct i2c_client *client;
> > +	int ret;
> > +
> > +	status = kzalloc(sizeof(struct i2c_slave_host_notify_status),
> > +			 GFP_KERNEL);
> > +	if (!status)
> > +		return ERR_PTR(-ENOMEM);
> > +	status->index = U8_MAX;
> 
> This line could go, too, if my simplification above works.

I've simplified the index handling as you suggested. The only impact is that
finally we do not consider anymore the I2C_SLAVE_WRITE_REQUESTED event as the
beginning of the transaction since we don't perform the "reset" of the
handling upon this event.

> > +void i2c_free_slave_host_notify_device(struct i2c_client *client)
> > +{
> > +	i2c_slave_unregister(client);
> > +	kfree(client->dev.platform_data);
> > +	i2c_unregister_device(client);
> > +}
> > +EXPORT_SYMBOL_GPL(i2c_free_slave_host_notify_device);
> 
> Sidenote: With my recent series "i2c: slave: improve sanity checks when
> un-/registering" this code became NULL-safe (and IS_ERR safe, too).

Sanity test on client added at the beginning of i2c_free_slave_host_notify_device
in order to ensure that we do not dereference a null pointer.

> > +static inline struct i2c_client *i2c_new_slave_host_notify_device(struct i2c_adapter *adapter)
> > +{
> > +	return NULL;
> 
> return ERR_PTR(-ENOSYS);
> 
> As the docs say, this function either returns a valid client or an
> ERR_PTR.

Done.

> 
> > +}
> > +static inline void i2c_free_slave_host_notify_device(struct i2c_client *client)
> > +{
> > +}
> > +#endif
> >  
> >  #if IS_ENABLED(CONFIG_I2C_SMBUS) && IS_ENABLED(CONFIG_DMI)
> >  void i2c_register_spd(struct i2c_adapter *adap);
> > -- 
> > 2.7.4
> > 

Re: [PATCH v2 1/2] i2c: smbus: add core function handling SMBus host-notify

[Alain Volmat]

Hi Wolfram,

I've taken your comments and prepared a new serie including them.
I'll wait for the conclusion regarding the bindings before pushing it.
I also have an additional patch ready in order to add again the SMBus Alert
support within the stm32f7 driver since it has been removed from the
current serie. Hopefully I can push it once binding is acked so that it
can get merged also in this cycle.

> > SMBus Host-Notify protocol, from the adapter point of view
> > consist of receiving a message from a client, including the
> > client address and some other data.
> > 
> > It can be simply handled by creating a new slave device
> > and registering a callback performing the parsing of the
> > message received from the client.
> > 
> > This commit introduces two new core functions
> >   * i2c_new_slave_host_notify_device
> >   * i2c_free_slave_host_notify_device
> > that take care of registration of the new slave device and
> > callback and will call i2c_handle_smbus_host_notify once a
> > Host-Notify event is received.
> > 
> > Signed-off-by: Alain Volmat <alain.volmat@st.com>
> > ---
> >  v2: identical to v1
> > 
> >  drivers/i2c/i2c-core-smbus.c | 114 +++++++++++++++++++++++++++++++++++++++++++
> 
> I came to the conclusion that this code should be in i2c-smbus.c.
> Because it is SMBus only. I agree that the current code layout is
> confusing. I will try to move the whole host-notify support to i2c-smbus
> in the next cycle.
> 
> Yes, that means that one needs to select I2C_SMBUS in the config, too
> (unless you want to 'select' it with your driver). But most people won't
> need it so they can compile it away. This is what I2C_SMBUS is for.

Ok, code is now moved into i2c-smbus.c
In case of the stm32f7 anyway I2C_SMBUS was already selected hence there is no
impact.

> > +static int i2c_slave_host_notify_cb(struct i2c_client *client,
> > +				    enum i2c_slave_event event, u8 *val)
> > +{
> > +	struct i2c_slave_host_notify_status *status = client->dev.platform_data;
> > +	int ret;
> > +
> 
> Can't we simplify 'index' handling similar to the testunit driver...
> 
> > +	switch (event) {
> > +	case I2C_SLAVE_WRITE_REQUESTED:
> > +		status->index = 0;
> 
> ... by removing this line...
> 
> > +		break;
> > +	case I2C_SLAVE_WRITE_RECEIVED:
> > +		/* We only retrieve the first byte received (addr)
> > +		 * since there is currently no support to retrieve the data
> > +		 * parameter from the client.
> > +		 */
> > +		if (status->index == 0)
> > +			status->addr = *val;
> > +		if (status->index < U8_MAX)
> > +			status->index++;
> > +		break;
> > +	case I2C_SLAVE_STOP:
> > +		/* Handle host-notify if whole message received only */
> > +		if (status->index != SMBUS_HOST_NOTIFY_LEN) {
> > +			status->index = U8_MAX;
> > +			break;
> > +		}
> > +
> > +		ret = i2c_handle_smbus_host_notify(client->adapter,
> > +						   status->addr);
> > +		if (ret < 0)
> > +			return ret;
> > +		status->index = U8_MAX;
> 
> ... and handling the logic here like:
> 
> +		if (status->index == SMBUS_HOST_NOTIFY_LEN)
> +			i2c_handle_smbus_host_notify(client->adapter, status->addr);
> +		status->index = 0;
> 
> Note that I2C_SLAVE_STOP doesn't return a retval, so we don't need to check
> i2c_handle_smbus_host_notify().
> 
> > +		break;
> > +	case I2C_SLAVE_READ_REQUESTED:
> > +	case I2C_SLAVE_READ_PROCESSED:
> > +		*val = 0xff;
> > +		break;
> > +	}
> > +
> > +	return 0;
> > +}
> > +
> > +/**
> > + * i2c_new_slave_host_notify_device - get a client for SMBus host-notify support
> > + * @adapter: the target adapter
> > + * Context: can sleep
> > + *
> > + * Setup handling of the SMBus host-notify protocol on a given I2C bus segment.
> > + *
> > + * Handling is done by creating a device and its callback and handling data
> > + * received via the SMBus host-notify address (0x8)
> > + *
> > + * This returns the client, which should be ultimately freed using
> > + * i2c_free_slave_host_notify_device(); or an ERRPTR to indicate an error.
> > + */
> > +struct i2c_client *i2c_new_slave_host_notify_device(struct i2c_adapter *adapter)
> > +{
> > +	struct i2c_board_info host_notify_board_info = {
> > +		I2C_BOARD_INFO("smbus_host_notify", 0x08),
> > +		.flags  = I2C_CLIENT_SLAVE,
> > +	};
> > +	struct i2c_slave_host_notify_status *status;
> > +	struct i2c_client *client;
> > +	int ret;
> > +
> > +	status = kzalloc(sizeof(struct i2c_slave_host_notify_status),
> > +			 GFP_KERNEL);
> > +	if (!status)
> > +		return ERR_PTR(-ENOMEM);
> > +	status->index = U8_MAX;
> 
> This line could go, too, if my simplification above works.

I've simplified the index handling as you suggested. The only impact is that
finally we do not consider anymore the I2C_SLAVE_WRITE_REQUESTED event as the
beginning of the transaction since we don't perform the "reset" of the
handling upon this event.

> > +void i2c_free_slave_host_notify_device(struct i2c_client *client)
> > +{
> > +	i2c_slave_unregister(client);
> > +	kfree(client->dev.platform_data);
> > +	i2c_unregister_device(client);
> > +}
> > +EXPORT_SYMBOL_GPL(i2c_free_slave_host_notify_device);
> 
> Sidenote: With my recent series "i2c: slave: improve sanity checks when
> un-/registering" this code became NULL-safe (and IS_ERR safe, too).

Sanity test on client added at the beginning of i2c_free_slave_host_notify_device
in order to ensure that we do not dereference a null pointer.

> > +static inline struct i2c_client *i2c_new_slave_host_notify_device(struct i2c_adapter *adapter)
> > +{
> > +	return NULL;
> 
> return ERR_PTR(-ENOSYS);
> 
> As the docs say, this function either returns a valid client or an
> ERR_PTR.

Done.

> 
> > +}
> > +static inline void i2c_free_slave_host_notify_device(struct i2c_client *client)
> > +{
> > +}
> > +#endif
> >  
> >  #if IS_ENABLED(CONFIG_I2C_SMBUS) && IS_ENABLED(CONFIG_DMI)
> >  void i2c_register_spd(struct i2c_adapter *adap);
> > -- 
> > 2.7.4
> > 



_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Re: [PATCH v2 1/2] i2c: smbus: add core function handling SMBus host-notify

[Wolfram Sang]

[-- Attachment #1: Type: text/plain, Size: 631 bytes --]

Hi Alain,

> I've taken your comments and prepared a new serie including them.
> I'll wait for the conclusion regarding the bindings before pushing it.

Thanks! I hope we can finish the discussion this week because Linus
hasn't made a clear statement if there will be an rc8. But I still think
we can do HostNotify for v5.9.

> I also have an additional patch ready in order to add again the SMBus Alert
> support within the stm32f7 driver since it has been removed from the
> current serie. Hopefully I can push it once binding is acked so that it
> can get merged also in this cycle.

If it is super straight-forward, then yes.


[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 833 bytes --]

Re: [PATCH v2 1/2] i2c: smbus: add core function handling SMBus host-notify

[Wolfram Sang]

[-- Attachment #1.1: Type: text/plain, Size: 631 bytes --]

Hi Alain,

> I've taken your comments and prepared a new serie including them.
> I'll wait for the conclusion regarding the bindings before pushing it.

Thanks! I hope we can finish the discussion this week because Linus
hasn't made a clear statement if there will be an rc8. But I still think
we can do HostNotify for v5.9.

> I also have an additional patch ready in order to add again the SMBus Alert
> support within the stm32f7 driver since it has been removed from the
> current serie. Hopefully I can push it once binding is acked so that it
> can get merged also in this cycle.

If it is super straight-forward, then yes.


[-- Attachment #1.2: signature.asc --]
[-- Type: application/pgp-signature, Size: 833 bytes --]

[-- Attachment #2: Type: text/plain, Size: 176 bytes --]

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Re: [PATCH v2 1/2] i2c: smbus: add core function handling SMBus host-notify

[Wolfram Sang]

[-- Attachment #1: Type: text/plain, Size: 1085 bytes --]

> I've simplified the index handling as you suggested. The only impact is that
> finally we do not consider anymore the I2C_SLAVE_WRITE_REQUESTED event as the
> beginning of the transaction since we don't perform the "reset" of the
> handling upon this event.

One more comment on this one because I had to update the testunit, too.
To be robust against multiple write messages in one transfer, we need to
reset both, after STOP and when I2C_SLAVE_WRITE_REQUESTED. See here:

 96         case I2C_SLAVE_STOP:
 97                 if (tu->reg_idx == TU_NUM_REGS)
 98                         queue_delayed_work(system_long_wq, &tu->worker,
 99                                            msecs_to_jiffies(100 * tu->regs[TU_REG_DELAY]));
100                 fallthrough;
101 
102         case I2C_SLAVE_WRITE_REQUESTED:
103                 tu->reg_idx = 0;
104                 break;

As you see, I used 'fallthrough' to avoid code duplication and that only
one reset part will be updated.

Dunno if you really need it, too, as I haven't seen your latest code yet.


[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 833 bytes --]

Re: [PATCH v2 1/2] i2c: smbus: add core function handling SMBus host-notify

[Wolfram Sang]

[-- Attachment #1.1: Type: text/plain, Size: 1085 bytes --]

> I've simplified the index handling as you suggested. The only impact is that
> finally we do not consider anymore the I2C_SLAVE_WRITE_REQUESTED event as the
> beginning of the transaction since we don't perform the "reset" of the
> handling upon this event.

One more comment on this one because I had to update the testunit, too.
To be robust against multiple write messages in one transfer, we need to
reset both, after STOP and when I2C_SLAVE_WRITE_REQUESTED. See here:

 96         case I2C_SLAVE_STOP:
 97                 if (tu->reg_idx == TU_NUM_REGS)
 98                         queue_delayed_work(system_long_wq, &tu->worker,
 99                                            msecs_to_jiffies(100 * tu->regs[TU_REG_DELAY]));
100                 fallthrough;
101 
102         case I2C_SLAVE_WRITE_REQUESTED:
103                 tu->reg_idx = 0;
104                 break;

As you see, I used 'fallthrough' to avoid code duplication and that only
one reset part will be updated.

Dunno if you really need it, too, as I haven't seen your latest code yet.


[-- Attachment #1.2: signature.asc --]
[-- Type: application/pgp-signature, Size: 833 bytes --]

[-- Attachment #2: Type: text/plain, Size: 176 bytes --]

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel