All of lore.kernel.org
 help / color / mirror / Atom feed
From: Hui Wang <hui.wang@canonical.com>
To: alsa-devel@alsa-project.org, broonie@kernel.org,
	Vijendar.Mukunda@amd.com
Cc: stable@vger.kernel.org
Subject: [PATCH v2] ASoC: amd: renoir: restore two more registers during resume
Date: Thu, 30 Jul 2020 20:31:38 +0800	[thread overview]
Message-ID: <20200730123138.5659-1-hui.wang@canonical.com> (raw)

Recently we found an issue about the suspend and resume. If dmic is
recording the sound, and we run suspend and resume, after the resume,
the dmic can't work well anymore. we need to close the app and reopen
the app, then the dmic could record the sound again.

For example, we run "arecord -D hw:CARD=acp,DEV=0 -f S32_LE -c 2
-r 48000 test.wav", then suspend and resume, after the system resume
back, we speak to the dmic. then stop the arecord, use aplay to play
the test.wav, we could hear the sound recorded after resume is weird,
it is not what we speak to the dmic.

I found two registers are set in the dai_hw_params(), if the two
registers are set during the resume, this issue could be fixed.
Move the code of the dai_hw_params() into the pdm_dai_trigger(), then
these two registers will be set during resume since pdm_dai_trigger()
will be called during resume. And delete the empty function
dai_hw_params().

Cc: stable@vger.kernel.org
Signed-off-by: Hui Wang <hui.wang@canonical.com>
---
 sound/soc/amd/renoir/acp3x-pdm-dma.c | 29 +++++++++-------------------
 1 file changed, 9 insertions(+), 20 deletions(-)

diff --git a/sound/soc/amd/renoir/acp3x-pdm-dma.c b/sound/soc/amd/renoir/acp3x-pdm-dma.c
index 623dfd3ea705..7b14d9a81b97 100644
--- a/sound/soc/amd/renoir/acp3x-pdm-dma.c
+++ b/sound/soc/amd/renoir/acp3x-pdm-dma.c
@@ -314,40 +314,30 @@ static int acp_pdm_dma_close(struct snd_soc_component *component,
 	return 0;
 }
 
-static int acp_pdm_dai_hw_params(struct snd_pcm_substream *substream,
-				 struct snd_pcm_hw_params *params,
-				 struct snd_soc_dai *dai)
+static int acp_pdm_dai_trigger(struct snd_pcm_substream *substream,
+			       int cmd, struct snd_soc_dai *dai)
 {
 	struct pdm_stream_instance *rtd;
+	int ret;
+	bool pdm_status;
 	unsigned int ch_mask;
 
 	rtd = substream->runtime->private_data;
-	switch (params_channels(params)) {
+	ret = 0;
+	switch (substream->runtime->channels) {
 	case TWO_CH:
 		ch_mask = 0x00;
 		break;
 	default:
 		return -EINVAL;
 	}
-	rn_writel(ch_mask, rtd->acp_base + ACP_WOV_PDM_NO_OF_CHANNELS);
-	rn_writel(PDM_DECIMATION_FACTOR, rtd->acp_base +
-		  ACP_WOV_PDM_DECIMATION_FACTOR);
-	return 0;
-}
-
-static int acp_pdm_dai_trigger(struct snd_pcm_substream *substream,
-			       int cmd, struct snd_soc_dai *dai)
-{
-	struct pdm_stream_instance *rtd;
-	int ret;
-	bool pdm_status;
-
-	rtd = substream->runtime->private_data;
-	ret = 0;
 	switch (cmd) {
 	case SNDRV_PCM_TRIGGER_START:
 	case SNDRV_PCM_TRIGGER_RESUME:
 	case SNDRV_PCM_TRIGGER_PAUSE_RELEASE:
+		rn_writel(ch_mask, rtd->acp_base + ACP_WOV_PDM_NO_OF_CHANNELS);
+		rn_writel(PDM_DECIMATION_FACTOR, rtd->acp_base +
+			  ACP_WOV_PDM_DECIMATION_FACTOR);
 		rtd->bytescount = acp_pdm_get_byte_count(rtd,
 							 substream->stream);
 		pdm_status = check_pdm_dma_status(rtd->acp_base);
@@ -369,7 +359,6 @@ static int acp_pdm_dai_trigger(struct snd_pcm_substream *substream,
 }
 
 static struct snd_soc_dai_ops acp_pdm_dai_ops = {
-	.hw_params = acp_pdm_dai_hw_params,
 	.trigger   = acp_pdm_dai_trigger,
 };
 
-- 
2.17.1


             reply	other threads:[~2020-07-30 12:32 UTC|newest]

Thread overview: 3+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-07-30 12:31 Hui Wang [this message]
2020-08-01  5:26 ` [PATCH v2] ASoC: amd: renoir: restore two more registers during resume Mukunda,Vijendar
2020-08-03 15:52 ` Mark Brown

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20200730123138.5659-1-hui.wang@canonical.com \
    --to=hui.wang@canonical.com \
    --cc=Vijendar.Mukunda@amd.com \
    --cc=alsa-devel@alsa-project.org \
    --cc=broonie@kernel.org \
    --cc=stable@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.