From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: X-Spam-Checker-Version: SpamAssassin 3.4.0 (2014-02-07) on aws-us-west-2-korg-lkml-1.web.codeaurora.org X-Spam-Level: X-Spam-Status: No, score=-14.8 required=3.0 tests=BAYES_00,DKIM_INVALID, DKIM_SIGNED,FAKE_REPLY_C,HEADER_FROM_DIFFERENT_DOMAINS,INCLUDES_PATCH, MAILING_LIST_MULTI,MENTIONS_GIT_HOSTING,SIGNED_OFF_BY,SPF_HELO_NONE,SPF_PASS, USER_AGENT_SANE_1 autolearn=ham autolearn_force=no version=3.4.0 Received: from mail.kernel.org (mail.kernel.org [198.145.29.99]) by smtp.lore.kernel.org (Postfix) with ESMTP id 6AC88C433E1 for ; Sun, 16 Aug 2020 00:04:40 +0000 (UTC) Received: from vger.kernel.org (vger.kernel.org [23.128.96.18]) by mail.kernel.org (Postfix) with ESMTP id 2E36A2065C for ; Sun, 16 Aug 2020 00:04:40 +0000 (UTC) Authentication-Results: mail.kernel.org; dkim=fail reason="signature verification failed" (2048-bit key) header.d=gmail.com header.i=@gmail.com header.b="CMDNmjNS" Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1726530AbgHPAEi (ORCPT ); Sat, 15 Aug 2020 20:04:38 -0400 Received: from lindbergh.monkeyblade.net ([23.128.96.19]:38400 "EHLO lindbergh.monkeyblade.net" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1725927AbgHPAEh (ORCPT ); Sat, 15 Aug 2020 20:04:37 -0400 Received: from mail-pj1-x1044.google.com (mail-pj1-x1044.google.com [IPv6:2607:f8b0:4864:20::1044]) by lindbergh.monkeyblade.net (Postfix) with ESMTPS id B804BC061786; Sat, 15 Aug 2020 17:04:37 -0700 (PDT) Received: by mail-pj1-x1044.google.com with SMTP id i92so6667769pje.0; Sat, 15 Aug 2020 17:04:37 -0700 (PDT) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=gmail.com; s=20161025; h=sender:date:from:to:cc:subject:message-id:mime-version :content-disposition:user-agent; bh=rp2TJspZOkPHBnlZOEmt4KdrSTA6oCHN76oFkNYpyMY=; b=CMDNmjNSTlXLBMYiBiUCupVfDSstNva/iTyIkZYf7TyyIW5vRtlJlf9XfOcBEqsBoL XOsRtyZLeCLTYW2pyGMRo8KcyMiQwb+4SeH6EAvtHdWx4WvgQoq7TJGIfY/YS7C41Acg Z2mV0dw9KozrTLTlY+gfInql84RPA8fbqYzD3RgiH0561UqCiVwWuV9CDSmYqFniT+Fa gUlgQsdqKGgdH9Aqjzs4sN6D9DdsUSh+PD8GgykJJFKy9hLF5csYPd83702ji3dQM1/R Y3tf5O/YSCg5w8/cYwk9dGKNXHCn0RGYAVzAPwLJAEtNC8cCAZXoIGpccWU6kYd791AH mSGg== X-Google-DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=1e100.net; s=20161025; h=x-gm-message-state:sender:date:from:to:cc:subject:message-id :mime-version:content-disposition:user-agent; bh=rp2TJspZOkPHBnlZOEmt4KdrSTA6oCHN76oFkNYpyMY=; b=eT1nnJsQJOvam3YDYyMYVkocC8pbVscNDDVcnF9ODIPwnH5jO20FWl56wwAyVqK2RM DPsyhkY8oxVOAQ73Wz7N3AZ1WBnxMQSybN3GS9J5exgGrN6KhOsXuWG8yCsbWsj/LrfR vtsMeT4AZVv0Fk5t8Q4PtcMFKEaEn+kMTG/XlIccccaKudrselwfoyWpVgZSfB8X6vV+ kpN43WtFEt19qCudgAN+OulBHmyXliBxC87H2RUCYKmP0jcd/PUz0gnyRw65cKI9v2Ht 30B51t0rf/nxey+CYxLYgtd40c6nVJ/52bgSYHq+zbxG49QruCyGcfJGR++FKJGmggNk Ldxw== X-Gm-Message-State: AOAM532SS48sgqtq79OPLYbrUH/sz9/Kn1esdyFypFC/I7PJk9I11Zd+ tnMEc2K2RA+rJcDHAa2fC2g= X-Google-Smtp-Source: ABdhPJy91+s1Y5sOXDkr4ihKyMuQzowtV2i/qGVtDfHoSN/NMqBAg/pbIV9fEQoZA8SoEAWzTfcVoA== X-Received: by 2002:a17:90b:816:: with SMTP id bk22mr7628261pjb.185.1597536276444; Sat, 15 Aug 2020 17:04:36 -0700 (PDT) Received: from localhost ([2600:1700:e321:62f0:329c:23ff:fee3:9d7c]) by smtp.gmail.com with ESMTPSA id k23sm11808608pgb.92.2020.08.15.17.04.35 (version=TLS1_2 cipher=ECDHE-ECDSA-CHACHA20-POLY1305 bits=256/256); Sat, 15 Aug 2020 17:04:35 -0700 (PDT) Date: Sat, 15 Aug 2020 17:04:35 -0700 From: Guenter Roeck To: jaap aarts Cc: Jean Delvare , "linux-hwmon@vger.kernel.org" , "linux-usb@vger.kernel.org" , =?utf-8?Q?Barnab=C3=A1s_P=C5=91cze?= Subject: Re: [PATCH V4] hwmon: add fan/pwm driver for corsair h100i platinum Message-ID: <20200816000435.GA11977@roeck-us.net> MIME-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline User-Agent: Mutt/1.9.4 (2018-02-28) Sender: linux-hwmon-owner@vger.kernel.org Precedence: bulk List-ID: X-Mailing-List: linux-hwmon@vger.kernel.org On Sat, Aug 15, 2020 at 11:16:17PM +0200, jaap aarts wrote: > Adds fan/pwm support for H100i platinum. > Custom temp/fan curves are not supported. > > v4: > - fixed spelling > - more consistent use of uN and other inconsistencies > - moved from semaphore to mutex, fixing 2 locking bugs allong the way > - moved to memcmp vs strncmp > - now uses driver_info for the device configuration > - check input ranges for fan rpm/pwm > - fix default case > - off-by-one loop range > - improved naming and logging messages > - fixed unfreed hdev > - use module_usb_driver > - use fixed-sized array for rpm/pwm channels independant of device. > - use common function for the USB bulk messages. > > Signed-off-by: Jaap Aarts checkpatch --strict says: total: 7 errors, 12 warnings, 13 checks, 714 lines checked Guenter > --- > drivers/hwmon/Kconfig | 7 + > drivers/hwmon/Makefile | 1 + > drivers/hwmon/corsair_hydro_i_pro.c | 694 ++++++++++++++++++++++++++++ > 3 files changed, 702 insertions(+) > create mode 100644 drivers/hwmon/corsair_hydro_i_pro.c > > diff --git a/drivers/hwmon/Kconfig b/drivers/hwmon/Kconfig > index 288ae9f63588..f466b72d0f67 100644 > --- a/drivers/hwmon/Kconfig > +++ b/drivers/hwmon/Kconfig > @@ -378,6 +378,13 @@ config SENSORS_ARM_SCPI > and power sensors available on ARM Ltd's SCP based platforms. The > actual number and type of sensors exported depend on the platform. > > +config SENSORS_CORSAIR_HYDRO_I_PRO > + tristate "Corsair hydro HXXXi pro driver" > + depends on USB > + help > + If you say yes here you get support for the corsair hydro HXXXi pro > + range of devices. > + > config SENSORS_ASB100 > tristate "Asus ASB100 Bach" > depends on X86 && I2C > diff --git a/drivers/hwmon/Makefile b/drivers/hwmon/Makefile > index 3e32c21f5efe..ec63294b3ef1 100644 > --- a/drivers/hwmon/Makefile > +++ b/drivers/hwmon/Makefile > @@ -20,6 +20,7 @@ obj-$(CONFIG_SENSORS_W83793) += w83793.o > obj-$(CONFIG_SENSORS_W83795) += w83795.o > obj-$(CONFIG_SENSORS_W83781D) += w83781d.o > obj-$(CONFIG_SENSORS_W83791D) += w83791d.o > +obj-$(CONFIG_SENSORS_CORSAIR_HYDRO_I_PRO) += corsair_hydro_i_pro.o > > obj-$(CONFIG_SENSORS_AB8500) += abx500.o ab8500.o > obj-$(CONFIG_SENSORS_ABITUGURU) += abituguru.o > diff --git a/drivers/hwmon/corsair_hydro_i_pro.c b/drivers/hwmon/corsair_hydro_i_pro.c > new file mode 100644 > index 000000000000..f4dd435be7dd > --- /dev/null > +++ b/drivers/hwmon/corsair_hydro_i_pro.c > @@ -0,0 +1,694 @@ > +// SPDX-License-Identifier: GPL-2.0-or-later > +/* > + * A hwmon driver for all corsair hyxro HXXXi pro all-in-one liquid coolers. > + * Copyright (c) Jaap Aarts 2020 > + * > + * Protocol partially reverse engineered by audiohacked > + * https://github.com/audiohacked/OpendriverLink > + */ > + > +/* > + * Supports following liquid coolers: > + * H100i platinum > + * > + * Other products should work with this driver with slight modification. > + * > + * Note: platinum is the codename name for pro within the driver, so H100i platinum = H100i pro. > + * But some products are actually called platinum, these are not intended to be supported (yet). > + * > + * Note: fan curve control has not been implemented > + */ > + > +#include > +#include > +#include > +#include > +#include > +#include > + > +struct device_config { > + u16 vendor_id; > + u16 product_id; > + u8 fancount; > + const char *name; > + const struct hwmon_channel_info **hwmon_info; > +}; > + > +struct hydro_i_pro_device { > + struct usb_device *udev; > + > + const struct device_config *config; > + > + unsigned char *bulk_out_buffer; > + unsigned char *bulk_in_buffer; > + size_t bulk_out_size; > + size_t bulk_in_size; > + char bulk_in_endpointAddr; > + char bulk_out_endpointAddr; > + > + struct usb_interface *interface; /* the interface for this device */ > + struct mutex io_mutex; > +}; > + > +#define max_fan_count 2 > +#define max_pwm_channel_count max_fan_count > + > +struct hwmon_data { > + struct hydro_i_pro_device *hdev; > + int channel_count; > + void *channel_data[max_pwm_channel_count]; > +}; > + > +struct curve_point { > + u8 temp; > + u8 pwm; > +}; > + > +struct hwmon_fan_data { > + u8 fan_channel; > + u16 fan_target; > + u8 fan_pwm_target; > + u8 mode; > + struct curve_point curve[7]; > +}; > + > +struct curve_point quiet_curve[] = { > + { > + .temp = 0x1F, > + .pwm = 0x15, > + }, > + { > + .temp = 0x21, > + .pwm = 0x1E, > + }, > + { > + .temp = 0x24, > + .pwm = 0x25, > + }, > + { > + .temp = 0x27, > + .pwm = 0x2D, > + }, > + { > + .temp = 0x29, > + .pwm = 0x38, > + }, > + { > + .temp = 0x2C, > + .pwm = 0x4A, > + }, > + { > + .temp = 0x2F, > + .pwm = 0x64, > + }, > +}; > + > +#define default_curve quiet_curve > + > +static const struct hwmon_channel_info *dual_fan[] = { > + HWMON_CHANNEL_INFO(fan, HWMON_F_INPUT | HWMON_F_TARGET | HWMON_F_MIN, > + HWMON_F_INPUT | HWMON_F_TARGET | HWMON_F_MIN), > + HWMON_CHANNEL_INFO(pwm, HWMON_PWM_INPUT | HWMON_PWM_ENABLE, > + HWMON_PWM_INPUT | HWMON_PWM_ENABLE), > + > + NULL > +}; > + > +static const struct device_config config_table[] = { > + { > + .vendor_id = 0x1b1c, > + .product_id = 0x0c15, > + .fancount = 2, > + .name = "corsair_H100i_pro", > + .hwmon_info = dual_fan, > + }, > +}; > + > +#define BULK_TIMEOUT 100 > + > +enum opcodes { > + PWM_FAN_CURVE_CMD = 0x40, > + PWM_GET_CURRENT_CMD = 0x41, > + PWM_FAN_TARGET_CMD = 0x42, > + RPM_FAN_TARGET_CMD = 0x43, > +}; > + > +#define SUCCES_LENGTH 3 > +#define SUCCES_CODE 0x12, 0x34 > + > +static bool check_succes(enum opcodes command, char ret[SUCCES_LENGTH]) > +{ > + char success[SUCCES_LENGTH] = { command, SUCCES_CODE }; > + return memcmp(ret, success, SUCCES_LENGTH) == 0; > +} > + > +static int acquire_lock(struct hydro_i_pro_device *hdev) > +{ > + int retval = usb_autopm_get_interface(hdev->interface); > + if (retval) > + return retval; > + > + mutex_lock(&hdev->io_mutex); > + return 0; > +} > + > +static int transfer_usb(struct hydro_i_pro_device *hdev, > + unsigned char *send_buf, unsigned char *recv_buf, > + int send_len, int recv_len) > +{ > + int retval; > + int wrote; > + int sndpipe = usb_sndbulkpipe(hdev->udev, hdev->bulk_out_endpointAddr); > + int rcvpipe = usb_rcvbulkpipe(hdev->udev, hdev->bulk_in_endpointAddr); > + > + retval = usb_bulk_msg(hdev->udev, sndpipe, send_buf, send_len, &wrote, > + BULK_TIMEOUT); > + if (retval) > + return retval; > + > + retval = usb_bulk_msg(hdev->udev, rcvpipe, recv_buf, recv_len, &wrote, > + BULK_TIMEOUT); > + if (retval) > + return retval; > + return 0; > +} > + > +static int set_fan_pwm_curve(struct hydro_i_pro_device *hdev, > + struct hwmon_fan_data *fan_data, > + struct curve_point point[7]) > +{ > + int retval; > + unsigned char *send_buf = hdev->bulk_out_buffer; > + unsigned char *recv_buf = hdev->bulk_in_buffer; > + > + memcpy(fan_data->curve, point, sizeof(struct curve_point) * 7); > + > + send_buf[0] = PWM_FAN_CURVE_CMD; > + send_buf[1] = fan_data->fan_channel; > + send_buf[2] = point[0].temp; > + send_buf[3] = point[1].temp; > + send_buf[4] = point[2].temp; > + send_buf[5] = point[3].temp; > + send_buf[6] = point[4].temp; > + send_buf[7] = point[5].temp; > + send_buf[8] = point[6].temp; > + send_buf[9] = point[0].pwm; > + send_buf[10] = point[1].pwm; > + send_buf[11] = point[2].pwm; > + send_buf[12] = point[3].pwm; > + send_buf[13] = point[4].pwm; > + send_buf[14] = point[5].pwm; > + send_buf[15] = point[6].pwm; > + > + retval = transfer_usb(hdev, send_buf, recv_buf, 16, 4); > + if (retval) > + return retval; > + > + if (!check_succes(send_buf[0], recv_buf)) { > + dev_warn( > + &hdev->udev->dev, > + "failed setting fan pwm/temp curve for %s on channel %d %d,%d,%d\n", > + hdev->config->name, recv_buf[3], recv_buf[0], > + recv_buf[1], recv_buf[2]); > + return -EINVAL; > + } > + return 0; > +} > + > +static int set_fan_target_rpm(struct hydro_i_pro_device *hdev, > + struct hwmon_fan_data *fan_data, u16 val) > +{ > + int retval; > + unsigned char *send_buf = hdev->bulk_out_buffer; > + unsigned char *recv_buf = hdev->bulk_in_buffer; > + > + fan_data->fan_target = val; > + fan_data->fan_pwm_target = 0; > + > + send_buf[0] = RPM_FAN_TARGET_CMD; > + send_buf[1] = fan_data->fan_channel; > + send_buf[2] = (fan_data->fan_target >> 8); > + send_buf[3] = fan_data->fan_target; > + > + retval = transfer_usb(hdev, send_buf, recv_buf, 4, 6); > + if (retval) > + return retval; > + > + if (!check_succes(send_buf[0], recv_buf)) { > + dev_warn( > + &hdev->udev->dev, > + "failed setting fan rpm for %s on channel %d %d,%d,%d\n", > + hdev->config->name, recv_buf[3], recv_buf[0], > + recv_buf[1], recv_buf[2]); > + return -EINVAL; > + } > + return 0; > +} > + > +static int get_fan_current_rpm(struct hydro_i_pro_device *hdev, > + struct hwmon_fan_data *fan_data, long *val) > +{ > + int retval; > + unsigned char *send_buf = hdev->bulk_out_buffer; > + unsigned char *recv_buf = hdev->bulk_in_buffer; > + > + send_buf[0] = PWM_GET_CURRENT_CMD; > + send_buf[1] = fan_data->fan_channel; > + > + retval = transfer_usb(hdev, send_buf, recv_buf, 2, 6); > + if (retval) > + return retval; > + > + if (!check_succes(send_buf[0], recv_buf) || > + recv_buf[3] != fan_data->fan_channel) { > + dev_warn( > + &hdev->udev->dev, > + "failed retreiving fan pwm for %s on channel %d %d,%d,%d\n", > + hdev->config->name, recv_buf[3], recv_buf[0], > + recv_buf[1], recv_buf[2]); > + return -EINVAL; > + } > + > + *val = ((recv_buf[4]) << 8) + recv_buf[5]; > + return 0; > +} > + > +static int set_fan_target_pwm(struct hydro_i_pro_device *hdev, > + struct hwmon_fan_data *fan_data, u8 val) > +{ > + int retval; > + unsigned char *send_buf = hdev->bulk_out_buffer; > + unsigned char *recv_buf = hdev->bulk_in_buffer; > + > + fan_data->fan_target = 0; > + fan_data->fan_pwm_target = val; > + > + send_buf[0] = PWM_FAN_TARGET_CMD; > + send_buf[1] = fan_data->fan_channel; > + send_buf[3] = fan_data->fan_pwm_target; > + > + retval = transfer_usb(hdev, send_buf, recv_buf, 4, 6); > + if (retval) > + return retval; > + > + if (!check_succes(send_buf[0], recv_buf)) { > + dev_warn( > + &hdev->udev->dev, > + "failed setting fan pwm for %s on channel %d %d,%d,%d\n", > + hdev->config->name, recv_buf[3], recv_buf[0], > + recv_buf[1], recv_buf[2]); > + return -EINVAL; > + } > + return 0; > +} > + > +static umode_t hwmon_is_visible(const void *d, enum hwmon_sensor_types type, > + u32 attr, int channel) > +{ > + switch (type) { > + case hwmon_fan: > + switch (attr) { > + case hwmon_fan_input: > + return 0444; > + break; > + case hwmon_fan_target: > + return 0644; > + break; > + case hwmon_fan_min: > + return 0444; > + break; > + default: > + break; > + } > + break; > + case hwmon_pwm: > + switch (attr) { > + case hwmon_pwm_input: > + return 0200; > + break; > + case hwmon_pwm_enable: > + return 0644; > + break; > + default: > + break; > + } > + break; > + default: > + break; > + } > + return 0; > +} > + > +static int hwmon_write(struct device *dev, enum hwmon_sensor_types type, > + u32 attr, int channel, long val) > +{ > + struct hwmon_data *data = dev_get_drvdata(dev); > + struct hydro_i_pro_device *hdev = data->hdev; > + struct hwmon_fan_data *fan_data; > + int retval = 0; > + > + switch (type) { > + case hwmon_fan: > + switch (attr) { > + case hwmon_fan_target: > + fan_data = data->channel_data[channel]; > + if (fan_data->mode != 1) > + return -EINVAL; > + > + if (val < (2 ^ 16) - 2) > + return -EINVAL; > + > + retval = acquire_lock(hdev); > + if (retval) > + goto exit; > + > + retval = set_fan_target_rpm(hdev, fan_data, val); > + if (retval) > + goto cleanup; > + > + break; > + default: > + return -EINVAL; > + } > + break; > + case hwmon_pwm: > + switch (attr) { > + case hwmon_pwm_input: > + fan_data = data->channel_data[channel]; > + if (fan_data->mode != 1) > + return -EINVAL; > + > + if (val < (2 ^ 8) - 2) > + return -EINVAL; > + > + retval = acquire_lock(hdev); > + if (retval) > + goto exit; > + > + retval = set_fan_target_pwm(hdev, fan_data, val); > + if (retval) > + goto cleanup; > + > + break; > + case hwmon_pwm_enable: > + fan_data = data->channel_data[channel]; > + > + switch (val) { > + case 0: > + retval = acquire_lock(hdev); > + if (retval) > + goto exit; > + > + retval = set_fan_pwm_curve(hdev, fan_data, > + default_curve); > + if (retval) > + goto cleanup; > + fan_data->mode = 0; > + break; > + case 1: > + retval = acquire_lock(hdev); > + if (retval) > + goto exit; > + > + if (fan_data->fan_target != 0) { > + retval = set_fan_target_rpm( > + hdev, fan_data, > + fan_data->fan_target); > + if (retval) > + goto cleanup; > + } else if (fan_data->fan_pwm_target != 0) { > + retval = set_fan_target_pwm( > + hdev, fan_data, > + fan_data->fan_pwm_target); > + if (retval) > + goto cleanup; > + } > + fan_data->mode = 1; > + break; > + case 2: > + retval = acquire_lock(hdev); > + if (retval) > + goto exit; > + > + retval = set_fan_pwm_curve(hdev, fan_data, > + default_curve); > + if (retval) > + goto cleanup; > + fan_data->mode = 2; > + break; > + default: > + return -EINVAL; > + } > + break; > + default: > + return -EINVAL; > + } > + break; > + default: > + return -EINVAL; > + } > + > +cleanup: > + mutex_unlock(&hdev->io_mutex); > + usb_autopm_put_interface(hdev->interface); > +exit: > + return retval; > +} > + > +static int hwmon_read(struct device *dev, enum hwmon_sensor_types type, > + u32 attr, int channel, long *val) > +{ > + struct hwmon_data *data = dev_get_drvdata(dev); > + struct hydro_i_pro_device *hdev = data->hdev; > + struct hwmon_fan_data *fan_data; > + int retval = 0; > + > + switch (type) { > + case hwmon_fan: > + switch (attr) { > + case hwmon_fan_input: > + fan_data = data->channel_data[channel]; > + > + retval = acquire_lock(hdev); > + if (retval) > + goto exit; > + > + retval = get_fan_current_rpm(hdev, fan_data, val); > + if (retval) > + goto cleanup; > + > + goto cleanup; > + case hwmon_fan_target: > + fan_data = data->channel_data[channel]; > + if (fan_data->mode != 1) { > + *val = 0; > + goto exit; > + } > + *val = fan_data->fan_target; > + goto exit; > + case hwmon_fan_min: > + *val = 200; > + goto exit; > + > + default: > + return -EINVAL; > + } > + goto exit; > + > + case hwmon_pwm: > + switch (attr) { > + case hwmon_pwm_enable: > + fan_data = data->channel_data[channel]; > + *val = fan_data->mode; > + goto exit; > + default: > + return -EINVAL; > + } > + goto exit; > + > + default: > + return -EINVAL; > + } > + > +cleanup: > + mutex_unlock(&hdev->io_mutex); > + usb_autopm_put_interface(hdev->interface); > +exit: > + return retval; > +} > + > +static const struct hwmon_ops i_pro_ops = { > + .is_visible = hwmon_is_visible, > + .read = hwmon_read, > + .write = hwmon_write, > +}; > + > +static void hwmon_init(struct hydro_i_pro_device *hdev) > +{ > + u8 fan_id; > + struct device *hwmon_dev; > + struct hwmon_fan_data *fan; > + struct hwmon_data *data = devm_kzalloc( > + &hdev->udev->dev, sizeof(struct hwmon_data), GFP_KERNEL); > + struct hwmon_chip_info *hwmon_info = devm_kzalloc( > + &hdev->udev->dev, sizeof(struct hwmon_chip_info), GFP_KERNEL); > + > + /* You did something bad!! Either adjust max_fan_count or the fancount for the config!*/ > + WARN_ON(hdev->config->fancount >= max_pwm_channel_count); > + data->channel_count = hdev->config->fancount; > + > + /* For each fan create a data channel a fan config entry and a pwm config entry */ > + for (fan_id = 0; fan_id < data->channel_count; fan_id++) { > + fan = devm_kzalloc(&hdev->udev->dev, > + sizeof(struct hwmon_fan_data), GFP_KERNEL); > + fan->fan_channel = fan_id; > + fan->mode = 0; > + data->channel_data[fan_id] = fan; > + } > + > + hwmon_info->ops = &i_pro_ops; > + hwmon_info->info = hdev->config->hwmon_info; > + > + data->hdev = hdev; > + hwmon_dev = devm_hwmon_device_register_with_info( > + &hdev->udev->dev, hdev->config->name, data, hwmon_info, NULL); > + dev_info(&hdev->udev->dev, "setup hwmon for %s\n", hdev->config->name); > +} > + > +const int USB_VENDOR_ID_CORSAIR = 0x1b1c; > +const int USB_PRODUCT_ID_H100I_PRO = 0x0c15; > +/* > + * Devices that work with this driver. > + * More devices should work, however none have been tested. > + */ > +static const struct usb_device_id astk_table[] = { > + { USB_DEVICE(USB_VENDOR_ID_CORSAIR, USB_PRODUCT_ID_H100I_PRO), > + .driver_info = (kernel_ulong_t)&config_table[0] }, > + {}, > +}; > + > +MODULE_DEVICE_TABLE(usb, astk_table); > + > +static int init_device(struct usb_device *udev) > +{ > + int retval; > + > + /* > + * This is needed because when running windows in a vm with proprietary driver > + * and you switch to this driver, the device will not respond unless you run this. > + */ > + retval = usb_control_msg(udev, usb_sndctrlpipe(udev, 0), 0x00, 0x40, > + 0xffff, 0x0000, 0, 0, 0); > + /*this always returns error*/ > + if (retval) > + ; > + > + retval = usb_control_msg(udev, usb_sndctrlpipe(udev, 0), 0x02, 0x40, > + 0x0002, 0x0000, 0, 0, 0); > + return retval; > +} > + > +static int deinit_device(struct usb_device *udev) > +{ > + return usb_control_msg(udev, usb_sndctrlpipe(udev, 0), 0x02, 0x40, > + 0x0004, 0x0000, 0, 0, 0); > +} > + > +static void astk_delete(struct hydro_i_pro_device *hdev) > +{ > + usb_put_intf(hdev->interface); > + usb_put_dev(hdev->udev); > + kfree(hdev->bulk_in_buffer); > + kfree(hdev->bulk_out_buffer); > + kfree(hdev); > +} > + > +static int astk_probe(struct usb_interface *interface, > + const struct usb_device_id *id) > +{ > + struct hydro_i_pro_device *hdev = > + kzalloc(sizeof(struct hydro_i_pro_device), GFP_KERNEL); > + int retval; > + struct usb_endpoint_descriptor *bulk_in, *bulk_out; > + > + if (!hdev) { > + kfree(hdev); > + retval = -ENOMEM; > + goto exit; > + } > + > + hdev->config = (const struct device_config *)id->driver_info; > + /* You should set the driver_info to a pointer to the correct configuration!!*/ > + WARN_ON(hdev->config == NULL); > + > + retval = usb_find_common_endpoints(interface->cur_altsetting, &bulk_in, > + &bulk_out, NULL, NULL); > + if (retval) { > + kfree(hdev); > + goto exit; > + } > + > + hdev->udev = usb_get_dev(interface_to_usbdev(interface)); > + hdev->interface = usb_get_intf(interface); > + > + /* > + * set up the endpoint information > + * use only the first bulk-in and bulk-out endpoints > + */ > + hdev->bulk_in_size = usb_endpoint_maxp(bulk_in); > + hdev->bulk_in_buffer = kmalloc(hdev->bulk_in_size, GFP_KERNEL); > + hdev->bulk_in_endpointAddr = bulk_in->bEndpointAddress; > + hdev->bulk_out_size = usb_endpoint_maxp(bulk_out); > + hdev->bulk_out_buffer = kmalloc(hdev->bulk_out_size, GFP_KERNEL); > + hdev->bulk_out_endpointAddr = bulk_out->bEndpointAddress; > + > + retval = init_device(hdev->udev); > + if (retval) { > + dev_err(&interface->dev, "failed initialising %s\n", > + hdev->config->name); > + kfree(hdev); > + goto exit; > + } > + > + hwmon_init(hdev); > + > + usb_set_intfdata(interface, hdev); > + mutex_init(&hdev->io_mutex); > +exit: > + return retval; > +} > + > +static void astk_disconnect(struct usb_interface *interface) > +{ > + struct hydro_i_pro_device *hdev = usb_get_intfdata(interface); > + dev_info(&hdev->udev->dev, "removed hwmon for %s\n", > + hdev->config->name); > + deinit_device(hdev->udev); > + usb_set_intfdata(interface, NULL); > + astk_delete(hdev); > +} > +static int astk_resume(struct usb_interface *intf) > +{ > + return 0; > +} > + > +static int astk_suspend(struct usb_interface *intf, pm_message_t message) > +{ > + return 0; > +} > + > +static struct usb_driver hydro_i_pro_driver = { > + .name = "hydro_i_pro_device", > + .id_table = astk_table, > + .probe = astk_probe, > + .disconnect = astk_disconnect, > + .resume = astk_resume, > + .suspend = astk_suspend, > + .supports_autosuspend = 1, > +}; > + > +module_usb_driver(hydro_i_pro_driver); > + > +MODULE_LICENSE("GPL"); > +MODULE_AUTHOR("Jaap Aarts "); > +MODULE_DESCRIPTION("Corsair HXXXi pro device driver"); > -- > 2.28.0 >