All of lore.kernel.org
 help / color / mirror / Atom feed
From: Imre Deak <imre.deak@intel.com>
To: intel-gfx@lists.freedesktop.org
Subject: [Intel-gfx] [PATCH v2] drm/i915/tgl+: Fix Combo PHY DPLL fractional divider for 38.4MHz ref clock
Date: Mon, 17 Aug 2020 21:08:53 +0300	[thread overview]
Message-ID: <20200817180853.5874-1-imre.deak@intel.com> (raw)
In-Reply-To: <20200714163236.14105-1-imre.deak@intel.com>

Apply Display WA #22010492432 for combo PHY PLLs too. This should fix a
problem where the PLL output frequency is slightly off with the current
PLL fractional divider value.

I haven't seen an actual case where this causes a problem, but let's
follow the spec. It's also needed on some EHL platforms, but for that we
also need a way to distinguish the affected EHL SKUs, so I leave that
for a follow-up.

v2:
- Apply the WA at one place when calculating the PLL dividers from the
  frequencty and the frequency from the dividers for all the combo PLL
  use cases (DP, HDMI, TBT). (Ville)

Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
---
 drivers/gpu/drm/i915/display/intel_dpll_mgr.c | 39 +++++++++++--------
 1 file changed, 23 insertions(+), 16 deletions(-)

diff --git a/drivers/gpu/drm/i915/display/intel_dpll_mgr.c b/drivers/gpu/drm/i915/display/intel_dpll_mgr.c
index 81ab975fe4f0..da4888dbc071 100644
--- a/drivers/gpu/drm/i915/display/intel_dpll_mgr.c
+++ b/drivers/gpu/drm/i915/display/intel_dpll_mgr.c
@@ -2610,12 +2610,23 @@ static bool cnl_ddi_hdmi_pll_dividers(struct intel_crtc_state *crtc_state)
 	return true;
 }
 
+/*
+ * Display WA #22010492432: tgl
+ * Program half of the nominal DCO divider fraction value.
+ */
+static bool
+tgl_combo_pll_div_frac_wa_needed(struct drm_i915_private *i915)
+{
+	return IS_TIGERLAKE(i915);
+}
+
 static int __cnl_ddi_wrpll_get_freq(struct drm_i915_private *dev_priv,
 				    const struct intel_shared_dpll *pll,
 				    int ref_clock)
 {
 	const struct intel_dpll_hw_state *pll_state = &pll->state.hw_state;
 	u32 p0, p1, p2, dco_freq;
+	int dco_div_frac;
 
 	p0 = pll_state->cfgcr1 & DPLL_CFGCR1_PDIV_MASK;
 	p2 = pll_state->cfgcr1 & DPLL_CFGCR1_KDIV_MASK;
@@ -2657,8 +2668,11 @@ static int __cnl_ddi_wrpll_get_freq(struct drm_i915_private *dev_priv,
 	dco_freq = (pll_state->cfgcr0 & DPLL_CFGCR0_DCO_INTEGER_MASK) *
 		   ref_clock;
 
-	dco_freq += (((pll_state->cfgcr0 & DPLL_CFGCR0_DCO_FRACTION_MASK) >>
-		      DPLL_CFGCR0_DCO_FRACTION_SHIFT) * ref_clock) / 0x8000;
+	dco_div_frac = (pll_state->cfgcr0 & DPLL_CFGCR0_DCO_FRACTION_MASK) >>
+		       DPLL_CFGCR0_DCO_FRACTION_SHIFT;
+	if (tgl_combo_pll_div_frac_wa_needed(dev_priv))
+		dco_div_frac *= 2;
+	dco_freq += dco_div_frac * ref_clock / 0x8000;
 
 	if (drm_WARN_ON(&dev_priv->drm, p0 == 0 || p1 == 0 || p2 == 0))
 		return 0;
@@ -2936,16 +2950,6 @@ static const struct skl_wrpll_params tgl_tbt_pll_24MHz_values = {
 	/* the following params are unused */
 };
 
-/*
- * Display WA #22010492432: tgl
- * Divide the nominal .dco_fraction value by 2.
- */
-static const struct skl_wrpll_params tgl_tbt_pll_38_4MHz_values = {
-	.dco_integer = 0x54, .dco_fraction = 0x1800,
-	/* the following params are unused */
-	.pdiv = 0, .kdiv = 0, .qdiv_mode = 0, .qdiv_ratio = 0,
-};
-
 static bool icl_calc_dp_combo_pll(struct intel_crtc_state *crtc_state,
 				  struct skl_wrpll_params *pll_params)
 {
@@ -2979,14 +2983,12 @@ static bool icl_calc_tbt_pll(struct intel_crtc_state *crtc_state,
 			MISSING_CASE(dev_priv->dpll.ref_clks.nssc);
 			/* fall-through */
 		case 19200:
+		case 38400:
 			*pll_params = tgl_tbt_pll_19_2MHz_values;
 			break;
 		case 24000:
 			*pll_params = tgl_tbt_pll_24MHz_values;
 			break;
-		case 38400:
-			*pll_params = tgl_tbt_pll_38_4MHz_values;
-			break;
 		}
 	} else {
 		switch (dev_priv->dpll.ref_clks.nssc) {
@@ -3053,9 +3055,14 @@ static void icl_calc_dpll_state(struct drm_i915_private *i915,
 				const struct skl_wrpll_params *pll_params,
 				struct intel_dpll_hw_state *pll_state)
 {
+	int dco_div_frac = pll_params->dco_fraction;
+
 	memset(pll_state, 0, sizeof(*pll_state));
 
-	pll_state->cfgcr0 = DPLL_CFGCR0_DCO_FRACTION(pll_params->dco_fraction) |
+	if (tgl_combo_pll_div_frac_wa_needed(i915))
+		dco_div_frac = DIV_ROUND_CLOSEST(dco_div_frac, 2);
+
+	pll_state->cfgcr0 = DPLL_CFGCR0_DCO_FRACTION(dco_div_frac) |
 			    pll_params->dco_integer;
 
 	pll_state->cfgcr1 = DPLL_CFGCR1_QDIV_RATIO(pll_params->qdiv_ratio) |
-- 
2.17.1

_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/intel-gfx

  parent reply	other threads:[~2020-08-17 18:08 UTC|newest]

Thread overview: 10+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-07-14 16:32 [Intel-gfx] [PATCH] drm/i915/tgl+: Fix Combo PHY DPLL fractional divider for 38.4MHz ref clock Imre Deak
2020-07-14 19:31 ` [Intel-gfx] ✓ Fi.CI.BAT: success for " Patchwork
2020-07-15  0:55 ` [Intel-gfx] ✓ Fi.CI.IGT: " Patchwork
2020-07-17 16:10 ` [Intel-gfx] [PATCH] " Ville Syrjälä
2020-07-17 17:37   ` Imre Deak
2020-07-17 18:17     ` Ville Syrjälä
2020-08-17 18:08 ` Imre Deak [this message]
2020-08-17 18:41 ` [Intel-gfx] ✓ Fi.CI.BAT: success for drm/i915/tgl+: Fix Combo PHY DPLL fractional divider for 38.4MHz ref clock (rev2) Patchwork
2020-08-17 21:17 ` [Intel-gfx] ✗ Fi.CI.IGT: failure " Patchwork
2020-08-18 14:07   ` Imre Deak

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20200817180853.5874-1-imre.deak@intel.com \
    --to=imre.deak@intel.com \
    --cc=intel-gfx@lists.freedesktop.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.