All of lore.kernel.org
 help / color / mirror / Atom feed
From: Jacopo Mondi <jacopo@jmondi.org>
To: Andrey Konovalov <andrey.konovalov@linaro.org>
Cc: Jacopo Mondi <jacopo+renesas@jmondi.org>,
	robh+dt@kernel.org, devicetree@vger.kernel.org,
	linux-media@vger.kernel.org, Leon Luo <leonl@leopardimaging.com>,
	mchehab@kernel.org, sakari.ailus@linux.intel.com,
	hverkuil-cisco@xs4all.nl, laurent.pinchart@ideasonboard.com,
	linux-renesas-soc@vger.kernel.org
Subject: Re: [PATCH] dt-bindings: media: imx274: Convert to json-schema
Date: Tue, 18 Aug 2020 14:05:53 +0200	[thread overview]
Message-ID: <20200818120553.4gfuy7abuin7g24r@uno.localdomain> (raw)
In-Reply-To: <3592105f-584f-eeeb-4ece-89f3f6bb5352@linaro.org>

Hi Andrey

On Tue, Aug 18, 2020 at 09:43:46AM +0300, Andrey Konovalov wrote:
> Hi Jacopo,
>
> Misprint in the subject (imx274 vs imx214)?
>
> Thanks,
> Andrey

Seems like I screwed up big times with this patch.
I'll fix and resend with the right subject!

Thanks
  j

>
> On 17.08.2020 22:18, Jacopo Mondi wrote:
> > Slightly better with a subject  =)
> >
> > I made a formatting error, empty line between receivers list and Subject:
> >
> > Sorry about this :)
> >
> > On Mon, Aug 17, 2020 at 06:00:37PM +0200, Jacopo Mondi wrote:
> > > Subject: [PATCH] dt-bindings: media: imx274: Convert to json-schema
> > >
> > > Convert the imx274 bindings document to json-schema and update
> > > the MAINTAINERS file accordingly.
> > >
> > > Signed-off-by: Jacopo Mondi <jacopo+renesas@jmondi.org>
> > > ---
> > >   .../bindings/media/i2c/sony,imx214.txt        |  53 --------
> > >   .../bindings/media/i2c/sony,imx214.yaml       | 124 ++++++++++++++++++
> > >   MAINTAINERS                                   |   2 +-
> > >   3 files changed, 125 insertions(+), 54 deletions(-)
> > >   delete mode 100644 Documentation/devicetree/bindings/media/i2c/sony,imx214.txt
> > >   create mode 100644 Documentation/devicetree/bindings/media/i2c/sony,imx214.yaml
> > >
> > > diff --git a/Documentation/devicetree/bindings/media/i2c/sony,imx214.txt b/Documentation/devicetree/bindings/media/i2c/sony,imx214.txt
> > > deleted file mode 100644
> > > index f11f28a5fda4..000000000000
> > > --- a/Documentation/devicetree/bindings/media/i2c/sony,imx214.txt
> > > +++ /dev/null
> > > @@ -1,53 +0,0 @@
> > > -* Sony 1/3.06-Inch 13.13Mp CMOS Digital Image Sensor
> > > -
> > > -The Sony imx214 is a 1/3.06-inch CMOS active pixel digital image sensor with
> > > -an active array size of 4224H x 3200V. It is programmable through an I2C
> > > -interface.
> > > -Image data is sent through MIPI CSI-2, through 2 or 4 lanes at a maximum
> > > -throughput of 1.2Gbps/lane.
> > > -
> > > -
> > > -Required Properties:
> > > -- compatible: Shall be "sony,imx214".
> > > -- reg: I2C bus address of the device. Depending on how the sensor is wired,
> > > -       it shall be <0x10> or <0x1a>;
> > > -- enable-gpios: GPIO descriptor for the enable pin.
> > > -- vdddo-supply: Chip digital IO regulator (1.8V).
> > > -- vdda-supply: Chip analog regulator (2.7V).
> > > -- vddd-supply: Chip digital core regulator (1.12V).
> > > -- clocks: Reference to the xclk clock.
> > > -- clock-frequency: Frequency of the xclk clock.
> > > -
> > > -Optional Properties:
> > > -- flash-leds: See ../video-interfaces.txt
> > > -- lens-focus: See ../video-interfaces.txt
> > > -
> > > -The imx214 device node shall contain one 'port' child node with
> > > -an 'endpoint' subnode. For further reading on port node refer to
> > > -Documentation/devicetree/bindings/media/video-interfaces.txt.
> > > -
> > > -Required Properties on endpoint:
> > > -- data-lanes: check ../video-interfaces.txt
> > > -- link-frequencies: check ../video-interfaces.txt
> > > -- remote-endpoint: check ../video-interfaces.txt
> > > -
> > > -Example:
> > > -
> > > -	camera-sensor@1a {
> > > -		compatible = "sony,imx214";
> > > -		reg = <0x1a>;
> > > -		vdddo-supply = <&pm8994_lvs1>;
> > > -		vddd-supply = <&camera_vddd_1v12>;
> > > -		vdda-supply = <&pm8994_l17>;
> > > -		lens-focus = <&ad5820>;
> > > -		enable-gpios = <&msmgpio 25 GPIO_ACTIVE_HIGH>;
> > > -		clocks = <&mmcc CAMSS_MCLK0_CLK>;
> > > -		clock-frequency = <24000000>;
> > > -		port {
> > > -			imx214_ep: endpoint {
> > > -				data-lanes = <1 2 3 4>;
> > > -				link-frequencies = /bits/ 64 <480000000>;
> > > -				remote-endpoint = <&csiphy0_ep>;
> > > -			};
> > > -		};
> > > -	};
> > > diff --git a/Documentation/devicetree/bindings/media/i2c/sony,imx214.yaml b/Documentation/devicetree/bindings/media/i2c/sony,imx214.yaml
> > > new file mode 100644
> > > index 000000000000..ddd4627214b1
> > > --- /dev/null
> > > +++ b/Documentation/devicetree/bindings/media/i2c/sony,imx214.yaml
> > > @@ -0,0 +1,124 @@
> > > +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> > > +%YAML 1.2
> > > +---
> > > +$id: http://devicetree.org/schemas/media/i2c/sony,imx214.yaml#
> > > +$schema: http://devicetree.org/meta-schemas/core.yaml#
> > > +
> > > +title: Sony 1/3.06-Inch 13.13Mp CMOS Digital Image Sensor
> > > +
> > > +maintainers:
> > > +  - Ricardo Ribalda <ribalda@kernel.org>
> > > +
> > > +description: -|
> > > +  The Sony imx214 is a 1/3.06-inch CMOS active pixel digital image sensor with
> > > +  an active array size of 4224H x 3200V. It is programmable through an I2C
> > > +  interface.  Image data is sent through MIPI CSI-2, through 2 or 4 lanes at a
> > > +  maximum throughput of 1.2Gbps/lane.
> > > +
> > > +properties:
> > > +  compatible:
> > > +    const: sony,imx214
> > > +
> > > +  reg:
> > > +    description: -|
> > > +      I2C device address. Depends on how the sensor is wired, it shall be
> > > +    enum:
> > > +      - 0x10
> > > +      - 0x1a
> > > +
> > > +  clocks:
> > > +    description: Reference to the xclk clock.
> > > +    maxItems: 1
> > > +
> > > +  clock-frequency:
> > > +    description: Frequency of the xclk clock in Hz.
> > > +
> > > +  enable-gpios:
> > > +    description: GPIO descriptor for the enable pin.
> > > +    maxItems: 1
> > > +
> > > +  vdddo-supply:
> > > +    description: Chip digital IO regulator (1.8V).
> > > +    maxItems: 1
> > > +
> > > +  vdda-supply:
> > > +    description: Chip analog regulator (2.7V).
> > > +    maxItems: 1
> > > +
> > > +  vddd-supply:
> > > +    description: Chip digital core regulator (1.12V).
> > > +    maxItems: 1
> > > +
> > > +  flash-leds:
> > > +    description: See ../video-interfaces.txt
> > > +
> > > +  lens-focus:
> > > +    description: See ../video-interfaces.txt
> > > +
> > > +  port:
> > > +    type: object
> > > +    description: |
> > > +      The device node must contain one 'port' child node for its digital output
> > > +      video port, in accordance with the video interface bindings defined in
> > > +      Documentation/devicetree/bindings/media/video-interfaces.txt.
> > > +
> > > +    properties:
> > > +      endpoint:
> > > +        type: object
> > > +        properties:
> > > +          remote-endpoint:
> > > +            description: See ../video-interfaces.txt
> > > +
> > > +          data-lanes:
> > > +            description: See ../video-interfaces.txt
> > > +
> > > +          link-frequencies:
> > > +            description: See ../video-interfaces.txt
> > > +
> > > +        required:
> > > +          - data-lanes
> > > +          - link-frequencies
> > > +
> > > +    additionalProperties: false
> > > +
> > > +required:
> > > +  - compatible
> > > +  - reg
> > > +  - clocks
> > > +  - clock-frequency
> > > +  - enable-gpios
> > > +  - vdddo-supply
> > > +  - vdda-supply
> > > +  - vddd-supply
> > > +  - port
> > > +
> > > +examples:
> > > +  - |
> > > +    #include <dt-bindings/gpio/gpio.h>
> > > +
> > > +    i2c0 {
> > > +        #address-cells = <1>;
> > > +        #size-cells = <0>;
> > > +
> > > +        camera-sensor@1a {
> > > +            compatible = "sony,imx214";
> > > +            reg = <0x1a>;
> > > +            vdddo-supply = <&pm8994_lvs1>;
> > > +            vddd-supply = <&camera_vddd_1v12>;
> > > +            vdda-supply = <&pm8994_l17>;
> > > +            lens-focus = <&ad5820>;
> > > +            enable-gpios = <&msmgpio 25 GPIO_ACTIVE_HIGH>;
> > > +            clocks = <&camera_clk>;
> > > +            clock-frequency = <24000000>;
> > > +
> > > +            port {
> > > +                imx214_ep: endpoint {
> > > +                    data-lanes = <1 2 3 4>;
> > > +                    link-frequencies = /bits/ 64 <480000000>;
> > > +                    remote-endpoint = <&csiphy0_ep>;
> > > +                };
> > > +            };
> > > +        };
> > > +    };
> > > +
> > > +...
> > > diff --git a/MAINTAINERS b/MAINTAINERS
> > > index 6c8e98238a7b..d1a6173d3b64 100644
> > > --- a/MAINTAINERS
> > > +++ b/MAINTAINERS
> > > @@ -15918,7 +15918,7 @@ M:	Ricardo Ribalda <ribalda@kernel.org>
> > >   L:	linux-media@vger.kernel.org
> > >   S:	Maintained
> > >   T:	git git://linuxtv.org/media_tree.git
> > > -F:	Documentation/devicetree/bindings/media/i2c/sony,imx214.txt
> > > +F:	Documentation/devicetree/bindings/media/i2c/sony,imx214.yaml
> > >   F:	drivers/media/i2c/imx214.c
> > >
> > >   SONY IMX219 SENSOR DRIVER
> > > --
> > > 2.27.0
> > >

  reply	other threads:[~2020-08-18 12:02 UTC|newest]

Thread overview: 7+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-08-17 16:00 Jacopo Mondi
2020-08-17 19:18 ` [PATCH] dt-bindings: media: imx274: Convert to json-schema Jacopo Mondi
2020-08-17 20:52   ` Rob Herring
2020-08-18  6:43   ` Andrey Konovalov
2020-08-18 12:05     ` Jacopo Mondi [this message]
2020-08-18 12:18 Jacopo Mondi
2020-08-19 13:47 ` Laurent Pinchart

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20200818120553.4gfuy7abuin7g24r@uno.localdomain \
    --to=jacopo@jmondi.org \
    --cc=andrey.konovalov@linaro.org \
    --cc=devicetree@vger.kernel.org \
    --cc=hverkuil-cisco@xs4all.nl \
    --cc=jacopo+renesas@jmondi.org \
    --cc=laurent.pinchart@ideasonboard.com \
    --cc=leonl@leopardimaging.com \
    --cc=linux-media@vger.kernel.org \
    --cc=linux-renesas-soc@vger.kernel.org \
    --cc=mchehab@kernel.org \
    --cc=robh+dt@kernel.org \
    --cc=sakari.ailus@linux.intel.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.