All of lore.kernel.org
 help / color / mirror / Atom feed
From: Peter Zijlstra <peterz@infradead.org>
To: linux-kernel@vger.kernel.org, mingo@kernel.org, will@kernel.org
Cc: npiggin@gmail.com, elver@google.com, jgross@suse.com,
	paulmck@kernel.org, rostedt@goodmis.org, rjw@rjwysocki.net,
	joel@joelfernandes.org, svens@linux.ibm.com, tglx@linutronix.de,
	peterz@infradead.org
Subject: [PATCH 2/9] sched,idle,rcu: Push rcu_idle deeper into the idle path
Date: Thu, 20 Aug 2020 09:30:33 +0200	[thread overview]
Message-ID: <20200820074640.401636694@infradead.org> (raw)
In-Reply-To: 20200820073031.886217423@infradead.org

Lots of things take locks, due to a wee bug, rcu_lockdep didn't notice
that the locking tracepoints were using RCU.

Push rcu_idle_{enter,exit}() as deep as possible into the idle paths,
this also resolves a lot of _rcuidle()/RCU_NONIDLE() usage.

Specifically, sched_clock_idle_wakeup_event() will use ktime which
will use seqlocks which will tickle lockdep.

Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
---
 drivers/cpuidle/cpuidle.c            |   15 +++++++++++----
 kernel/sched/idle.c                  |   18 ++++++------------
 kernel/time/tick-broadcast-hrtimer.c |   29 ++++++++++++-----------------
 3 files changed, 29 insertions(+), 33 deletions(-)

--- a/drivers/cpuidle/cpuidle.c
+++ b/drivers/cpuidle/cpuidle.c
@@ -145,22 +145,27 @@ static void enter_s2idle_proper(struct c
 	 * executing it contains RCU usage regarded as invalid in the idle
 	 * context, so tell RCU about that.
 	 */
-	RCU_NONIDLE(tick_freeze());
+	tick_freeze();
 	/*
 	 * The state used here cannot be a "coupled" one, because the "coupled"
 	 * cpuidle mechanism enables interrupts and doing that with timekeeping
 	 * suspended is generally unsafe.
 	 */
+	rcu_idle_enter();
 	stop_critical_timings();
 	drv->states[index].enter_s2idle(dev, drv, index);
-	WARN_ON(!irqs_disabled());
+	if (WARN_ON(!irqs_disabled()))
+		local_irq_disable();
 	/*
 	 * timekeeping_resume() that will be called by tick_unfreeze() for the
 	 * first CPU executing it calls functions containing RCU read-side
 	 * critical sections, so tell RCU about that.
+	 *
+	 * FIXME, order against rcu_idle_exit ?
 	 */
 	RCU_NONIDLE(tick_unfreeze());
 	start_critical_timings();
+	rcu_idle_exit();
 
 	time_end = ns_to_ktime(local_clock());
 
@@ -228,16 +233,18 @@ int cpuidle_enter_state(struct cpuidle_d
 	/* Take note of the planned idle state. */
 	sched_idle_set_state(target_state);
 
-	trace_cpu_idle_rcuidle(index, dev->cpu);
+	trace_cpu_idle(index, dev->cpu);
 	time_start = ns_to_ktime(local_clock());
 
+	rcu_idle_enter();
 	stop_critical_timings();
 	entered_state = target_state->enter(dev, drv, index);
 	start_critical_timings();
+	rcu_idle_exit();
 
 	sched_clock_idle_wakeup_event();
 	time_end = ns_to_ktime(local_clock());
-	trace_cpu_idle_rcuidle(PWR_EVENT_EXIT, dev->cpu);
+	trace_cpu_idle(PWR_EVENT_EXIT, dev->cpu);
 
 	/* The cpu is no longer idle or about to enter idle. */
 	sched_idle_set_state(NULL);
--- a/kernel/sched/idle.c
+++ b/kernel/sched/idle.c
@@ -54,17 +54,18 @@ __setup("hlt", cpu_idle_nopoll_setup);
 
 static noinline int __cpuidle cpu_idle_poll(void)
 {
+	trace_cpu_idle(0, smp_processor_id());
 	rcu_idle_enter();
-	trace_cpu_idle_rcuidle(0, smp_processor_id());
 	local_irq_enable();
 	stop_critical_timings();
 
 	while (!tif_need_resched() &&
-		(cpu_idle_force_poll || tick_check_broadcast_expired()))
+	       (cpu_idle_force_poll || tick_check_broadcast_expired()))
 		cpu_relax();
+
 	start_critical_timings();
-	trace_cpu_idle_rcuidle(PWR_EVENT_EXIT, smp_processor_id());
 	rcu_idle_exit();
+	trace_cpu_idle(PWR_EVENT_EXIT, smp_processor_id());
 
 	return 1;
 }
@@ -90,9 +91,11 @@ void __cpuidle default_idle_call(void)
 	if (current_clr_polling_and_test()) {
 		local_irq_enable();
 	} else {
+		rcu_idle_enter();
 		stop_critical_timings();
 		arch_cpu_idle();
 		start_critical_timings();
+		rcu_idle_exit();
 	}
 }
 
@@ -158,7 +161,6 @@ static void cpuidle_idle_call(void)
 
 	if (cpuidle_not_available(drv, dev)) {
 		tick_nohz_idle_stop_tick();
-		rcu_idle_enter();
 
 		default_idle_call();
 		goto exit_idle;
@@ -178,21 +180,17 @@ static void cpuidle_idle_call(void)
 		u64 max_latency_ns;
 
 		if (idle_should_enter_s2idle()) {
-			rcu_idle_enter();
 
 			entered_state = call_cpuidle_s2idle(drv, dev);
 			if (entered_state > 0)
 				goto exit_idle;
 
-			rcu_idle_exit();
-
 			max_latency_ns = U64_MAX;
 		} else {
 			max_latency_ns = dev->forced_idle_latency_limit_ns;
 		}
 
 		tick_nohz_idle_stop_tick();
-		rcu_idle_enter();
 
 		next_state = cpuidle_find_deepest_state(drv, dev, max_latency_ns);
 		call_cpuidle(drv, dev, next_state);
@@ -209,8 +207,6 @@ static void cpuidle_idle_call(void)
 		else
 			tick_nohz_idle_retain_tick();
 
-		rcu_idle_enter();
-
 		entered_state = call_cpuidle(drv, dev, next_state);
 		/*
 		 * Give the governor an opportunity to reflect on the outcome
@@ -226,8 +222,6 @@ static void cpuidle_idle_call(void)
 	 */
 	if (WARN_ON_ONCE(irqs_disabled()))
 		local_irq_enable();
-
-	rcu_idle_exit();
 }
 
 /*



  parent reply	other threads:[~2020-08-20  7:50 UTC|newest]

Thread overview: 23+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-08-20  7:30 [PATCH 0/9] TRACE_IRQFLAGS wreckage Peter Zijlstra
2020-08-20  7:30 ` [PATCH 1/9] lockdep: Use raw_cpu_*() for per-cpu variables Peter Zijlstra
2020-08-20 13:54   ` Steven Rostedt
2020-08-20  7:30 ` Peter Zijlstra [this message]
2020-08-20 13:58   ` [PATCH 2/9] sched,idle,rcu: Push rcu_idle deeper into the idle path Steven Rostedt
2020-08-20  7:30 ` [PATCH 3/9] cpuidle: Make CPUIDLE_FLAG_TLB_FLUSHED generic Peter Zijlstra
2020-08-20  7:30 ` [PATCH 4/9] cpuidle: Move trace_cpu_idle() into generic code Peter Zijlstra
2020-08-20  7:30 ` [PATCH 5/9] x86/entry: Remove unused THUNKs Peter Zijlstra
2020-08-20  7:30 ` [PATCH 6/9] locking/lockdep: Cleanup Peter Zijlstra
2020-08-20  7:30 ` [PATCH 7/9] nds32: Implement arch_irqs_disabled() Peter Zijlstra
2020-08-20  7:30 ` [PATCH 8/9] lockdep: Only trace IRQ edges Peter Zijlstra
2020-08-20  7:30 ` [PATCH 9/9] lockdep,trace: Expose tracepoints Peter Zijlstra
2020-08-20 14:36 ` [PATCH 0/9] TRACE_IRQFLAGS wreckage Steven Rostedt
2020-08-20 14:39   ` Steven Rostedt
2020-08-20 14:49   ` Marco Elver
2020-08-20 14:58   ` peterz
2020-08-20 16:53     ` Steven Rostedt
2020-08-20 17:20     ` Marco Elver
2020-08-20 19:59       ` Steven Rostedt
2020-08-21  6:37         ` Marco Elver
2020-08-21  6:54       ` peterz
2020-08-21  7:05         ` Marco Elver
2020-08-27  7:54       ` [tip: sched/urgent] sched: Use __always_inline on is_idle_task() tip-bot2 for Marco Elver

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20200820074640.401636694@infradead.org \
    --to=peterz@infradead.org \
    --cc=elver@google.com \
    --cc=jgross@suse.com \
    --cc=joel@joelfernandes.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=mingo@kernel.org \
    --cc=npiggin@gmail.com \
    --cc=paulmck@kernel.org \
    --cc=rjw@rjwysocki.net \
    --cc=rostedt@goodmis.org \
    --cc=svens@linux.ibm.com \
    --cc=tglx@linutronix.de \
    --cc=will@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.