[PATCH v2 11/24] drm/panel: orisetech-otm8009a: Backlight update

From: Sam Ravnborg <sam@ravnborg.org>
To: dri-devel@lists.freedesktop.org,
	Jingoo Han <jingoohan1@gmail.com>,
	Lee Jones <lee.jones@linaro.org>,
	Daniel Thompson <daniel.thompson@linaro.org>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>,
	Thierry Reding <thierry.reding@gmail.com>,
	Sam Ravnborg <sam@ravnborg.org>,
	Philippe CORNU <philippe.cornu@st.com>
Subject: [PATCH v2 11/24] drm/panel: orisetech-otm8009a: Backlight update
Date: Sun, 23 Aug 2020 12:45:19 +0200	[thread overview]
Message-ID: <20200823104532.1024798-12-sam@ravnborg.org> (raw)
In-Reply-To: <20200823104532.1024798-1-sam@ravnborg.org>

- Replace direct access to backlight_properties with
  backlight_get_brightness().
- Use brightness and not power to determine if backlight is off
- Use the devm_ variant for registering backlight device, and drop
  all explicit unregistering of the backlight device.

Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Cc: Philippe CORNU <philippe.cornu@st.com>
Cc: Thierry Reding <thierry.reding@gmail.com>
Cc: Sam Ravnborg <sam@ravnborg.org>
---
 drivers/gpu/drm/panel/panel-orisetech-otm8009a.c | 14 +++++---------
 1 file changed, 5 insertions(+), 9 deletions(-)

diff --git a/drivers/gpu/drm/panel/panel-orisetech-otm8009a.c b/drivers/gpu/drm/panel/panel-orisetech-otm8009a.c
index bb0c992171e8..e6534cca2a84 100644
--- a/drivers/gpu/drm/panel/panel-orisetech-otm8009a.c
+++ b/drivers/gpu/drm/panel/panel-orisetech-otm8009a.c
@@ -388,6 +388,7 @@ static const struct drm_panel_funcs otm8009a_drm_funcs = {
 static int otm8009a_backlight_update_status(struct backlight_device *bd)
 {
 	struct otm8009a *ctx = bl_get_data(bd);
+	u8 brightness = backlight_get_brightness(bd);
 	u8 data[2];
 
 	if (!ctx->prepared) {
@@ -395,13 +396,13 @@ static int otm8009a_backlight_update_status(struct backlight_device *bd)
 		return -ENXIO;
 	}
 
-	if (bd->props.power <= FB_BLANK_NORMAL) {
+	if (brightness > 0) {
 		/* Power on the backlight with the requested brightness
 		 * Note We can not use mipi_dsi_dcs_set_display_brightness()
 		 * as otm8009a driver support only 8-bit brightness (1 param).
 		 */
 		data[0] = MIPI_DCS_SET_DISPLAY_BRIGHTNESS;
-		data[1] = bd->props.brightness;
+		data[1] = brightness;
 		otm8009a_dcs_write_buf_hs(ctx, data, ARRAY_SIZE(data));
 
 		/* set Brightness Control & Backlight on */
@@ -428,6 +429,7 @@ static int otm8009a_probe(struct mipi_dsi_device *dsi)
 	struct device *dev = &dsi->dev;
 	struct otm8009a *ctx;
 	int ret;
+	DECLARE_BACKLIGHT_INIT_RAW(props, OTM8009A_BACKLIGHT_DEFAULT, OTM8009A_BACKLIGHT_MAX);
 
 	ctx = devm_kzalloc(dev, sizeof(*ctx), GFP_KERNEL);
 	if (!ctx)
@@ -462,25 +464,19 @@ static int otm8009a_probe(struct mipi_dsi_device *dsi)
 	ctx->bl_dev = devm_backlight_device_register(dev, dev_name(dev),
 						     dsi->host->dev, ctx,
 						     &otm8009a_backlight_ops,
-						     NULL);
+						     &props);
 	if (IS_ERR(ctx->bl_dev)) {
 		ret = PTR_ERR(ctx->bl_dev);
 		dev_err(dev, "failed to register backlight: %d\n", ret);
 		return ret;
 	}
 
-	ctx->bl_dev->props.max_brightness = OTM8009A_BACKLIGHT_MAX;
-	ctx->bl_dev->props.brightness = OTM8009A_BACKLIGHT_DEFAULT;
-	ctx->bl_dev->props.power = FB_BLANK_POWERDOWN;
-	ctx->bl_dev->props.type = BACKLIGHT_RAW;
-
 	drm_panel_add(&ctx->panel);
 
 	ret = mipi_dsi_attach(dsi);
 	if (ret < 0) {
 		dev_err(dev, "mipi_dsi_attach failed. Is host ready?\n");
 		drm_panel_remove(&ctx->panel);
-		backlight_device_unregister(ctx->bl_dev);
 		return ret;
 	}
 
-- 
2.25.1

_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel
