All of lore.kernel.org
 help / color / mirror / Atom feed
From: Sasha Levin <sashal@kernel.org>
To: linux-kernel@vger.kernel.org, stable@vger.kernel.org
Cc: Lukas Czerner <lczerner@redhat.com>,
	Andreas Dilger <adilger@dilger.ca>, Theodore Ts'o <tytso@mit.edu>,
	Sasha Levin <sashal@kernel.org>,
	linux-ext4@vger.kernel.org
Subject: [PATCH AUTOSEL 5.8 04/63] ext4: handle read only external journal device
Date: Mon, 24 Aug 2020 12:34:04 -0400	[thread overview]
Message-ID: <20200824163504.605538-4-sashal@kernel.org> (raw)
In-Reply-To: <20200824163504.605538-1-sashal@kernel.org>

From: Lukas Czerner <lczerner@redhat.com>

[ Upstream commit 273108fa5015eeffc4bacfa5ce272af3434b96e4 ]

Ext4 uses blkdev_get_by_dev() to get the block_device for journal device
which does check to see if the read-only block device was opened
read-only.

As a result ext4 will hapily proceed mounting the file system with
external journal on read-only device. This is bad as we would not be
able to use the journal leading to errors later on.

Instead of simply failing to mount file system in this case, treat it in
a similar way we treat internal journal on read-only device. Allow to
mount with -o noload in read-only mode.

This can be reproduced easily like this:

mke2fs -F -O journal_dev $JOURNAL_DEV 100M
mkfs.$FSTYPE -F -J device=$JOURNAL_DEV $FS_DEV
blockdev --setro $JOURNAL_DEV
mount $FS_DEV $MNT
touch $MNT/file
umount $MNT

leading to error like this

[ 1307.318713] ------------[ cut here ]------------
[ 1307.323362] generic_make_request: Trying to write to read-only block-device dm-2 (partno 0)
[ 1307.331741] WARNING: CPU: 36 PID: 3224 at block/blk-core.c:855 generic_make_request_checks+0x2c3/0x580
[ 1307.341041] Modules linked in: ext4 mbcache jbd2 rfkill intel_rapl_msr intel_rapl_common isst_if_commd
[ 1307.419445] CPU: 36 PID: 3224 Comm: jbd2/dm-2 Tainted: G        W I       5.8.0-rc5 #2
[ 1307.427359] Hardware name: Dell Inc. PowerEdge R740/01KPX8, BIOS 2.3.10 08/15/2019
[ 1307.434932] RIP: 0010:generic_make_request_checks+0x2c3/0x580
[ 1307.440676] Code: 94 03 00 00 48 89 df 48 8d 74 24 08 c6 05 cf 2b 18 01 01 e8 7f a4 ff ff 48 c7 c7 50e
[ 1307.459420] RSP: 0018:ffffc0d70eb5fb48 EFLAGS: 00010286
[ 1307.464646] RAX: 0000000000000000 RBX: ffff9b33b2978300 RCX: 0000000000000000
[ 1307.471780] RDX: ffff9b33e12a81e0 RSI: ffff9b33e1298000 RDI: ffff9b33e1298000
[ 1307.478913] RBP: ffff9b7b9679e0c0 R08: 0000000000000837 R09: 0000000000000024
[ 1307.486044] R10: 0000000000000000 R11: ffffc0d70eb5f9f0 R12: 0000000000000400
[ 1307.493177] R13: 0000000000000000 R14: 0000000000000001 R15: 0000000000000000
[ 1307.500308] FS:  0000000000000000(0000) GS:ffff9b33e1280000(0000) knlGS:0000000000000000
[ 1307.508396] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 1307.514142] CR2: 000055eaf4109000 CR3: 0000003dee40a006 CR4: 00000000007606e0
[ 1307.521273] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[ 1307.528407] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[ 1307.535538] PKRU: 55555554
[ 1307.538250] Call Trace:
[ 1307.540708]  generic_make_request+0x30/0x340
[ 1307.544985]  submit_bio+0x43/0x190
[ 1307.548393]  ? bio_add_page+0x62/0x90
[ 1307.552068]  submit_bh_wbc+0x16a/0x190
[ 1307.555833]  jbd2_write_superblock+0xec/0x200 [jbd2]
[ 1307.560803]  jbd2_journal_update_sb_log_tail+0x65/0xc0 [jbd2]
[ 1307.566557]  jbd2_journal_commit_transaction+0x2ae/0x1860 [jbd2]
[ 1307.572566]  ? check_preempt_curr+0x7a/0x90
[ 1307.576756]  ? update_curr+0xe1/0x1d0
[ 1307.580421]  ? account_entity_dequeue+0x7b/0xb0
[ 1307.584955]  ? newidle_balance+0x231/0x3d0
[ 1307.589056]  ? __switch_to_asm+0x42/0x70
[ 1307.592986]  ? __switch_to_asm+0x36/0x70
[ 1307.596918]  ? lock_timer_base+0x67/0x80
[ 1307.600851]  kjournald2+0xbd/0x270 [jbd2]
[ 1307.604873]  ? finish_wait+0x80/0x80
[ 1307.608460]  ? commit_timeout+0x10/0x10 [jbd2]
[ 1307.612915]  kthread+0x114/0x130
[ 1307.616152]  ? kthread_park+0x80/0x80
[ 1307.619816]  ret_from_fork+0x22/0x30
[ 1307.623400] ---[ end trace 27490236265b1630 ]---

Signed-off-by: Lukas Czerner <lczerner@redhat.com>
Reviewed-by: Andreas Dilger <adilger@dilger.ca>
Link: https://lore.kernel.org/r/20200717090605.2612-1-lczerner@redhat.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 fs/ext4/super.c | 51 ++++++++++++++++++++++++++++++++-----------------
 1 file changed, 33 insertions(+), 18 deletions(-)

diff --git a/fs/ext4/super.c b/fs/ext4/super.c
index 9fdad843b30ef..dda967efcbc2c 100644
--- a/fs/ext4/super.c
+++ b/fs/ext4/super.c
@@ -5079,6 +5079,7 @@ static int ext4_load_journal(struct super_block *sb,
 	dev_t journal_dev;
 	int err = 0;
 	int really_read_only;
+	int journal_dev_ro;
 
 	if (WARN_ON_ONCE(!ext4_has_feature_journal(sb)))
 		return -EFSCORRUPTED;
@@ -5091,7 +5092,31 @@ static int ext4_load_journal(struct super_block *sb,
 	} else
 		journal_dev = new_decode_dev(le32_to_cpu(es->s_journal_dev));
 
-	really_read_only = bdev_read_only(sb->s_bdev);
+	if (journal_inum && journal_dev) {
+		ext4_msg(sb, KERN_ERR,
+			 "filesystem has both journal inode and journal device!");
+		return -EINVAL;
+	}
+
+	if (journal_inum) {
+		journal = ext4_get_journal(sb, journal_inum);
+		if (!journal)
+			return -EINVAL;
+	} else {
+		journal = ext4_get_dev_journal(sb, journal_dev);
+		if (!journal)
+			return -EINVAL;
+	}
+
+	journal_dev_ro = bdev_read_only(journal->j_dev);
+	really_read_only = bdev_read_only(sb->s_bdev) | journal_dev_ro;
+
+	if (journal_dev_ro && !sb_rdonly(sb)) {
+		ext4_msg(sb, KERN_ERR,
+			 "journal device read-only, try mounting with '-o ro'");
+		err = -EROFS;
+		goto err_out;
+	}
 
 	/*
 	 * Are we loading a blank journal or performing recovery after a
@@ -5106,27 +5131,14 @@ static int ext4_load_journal(struct super_block *sb,
 				ext4_msg(sb, KERN_ERR, "write access "
 					"unavailable, cannot proceed "
 					"(try mounting with noload)");
-				return -EROFS;
+				err = -EROFS;
+				goto err_out;
 			}
 			ext4_msg(sb, KERN_INFO, "write access will "
 			       "be enabled during recovery");
 		}
 	}
 
-	if (journal_inum && journal_dev) {
-		ext4_msg(sb, KERN_ERR, "filesystem has both journal "
-		       "and inode journals!");
-		return -EINVAL;
-	}
-
-	if (journal_inum) {
-		if (!(journal = ext4_get_journal(sb, journal_inum)))
-			return -EINVAL;
-	} else {
-		if (!(journal = ext4_get_dev_journal(sb, journal_dev)))
-			return -EINVAL;
-	}
-
 	if (!(journal->j_flags & JBD2_BARRIER))
 		ext4_msg(sb, KERN_INFO, "barriers disabled");
 
@@ -5146,8 +5158,7 @@ static int ext4_load_journal(struct super_block *sb,
 
 	if (err) {
 		ext4_msg(sb, KERN_ERR, "error loading journal");
-		jbd2_journal_destroy(journal);
-		return err;
+		goto err_out;
 	}
 
 	EXT4_SB(sb)->s_journal = journal;
@@ -5167,6 +5178,10 @@ static int ext4_load_journal(struct super_block *sb,
 	}
 
 	return 0;
+
+err_out:
+	jbd2_journal_destroy(journal);
+	return err;
 }
 
 static int ext4_commit_super(struct super_block *sb, int sync)
-- 
2.25.1


  parent reply	other threads:[~2020-08-24 17:31 UTC|newest]

Thread overview: 109+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-08-24 16:34 [PATCH AUTOSEL 5.8 01/63] spi: stm32: clear only asserted irq flags on interrupt Sasha Levin
2020-08-24 16:34 ` Sasha Levin
2020-08-24 16:34 ` [PATCH AUTOSEL 5.8 02/63] jbd2: make sure jh have b_transaction set in refile/unfile_buffer Sasha Levin
2020-08-24 16:34 ` [PATCH AUTOSEL 5.8 03/63] ext4: don't BUG on inconsistent journal feature Sasha Levin
2020-08-24 16:34 ` Sasha Levin [this message]
2020-08-24 16:34 ` [PATCH AUTOSEL 5.8 05/63] ext4: skip non-loaded groups at cr=0/1 when scanning for good groups Sasha Levin
2020-08-24 16:34 ` [PATCH AUTOSEL 5.8 06/63] drm/virtio: fix memory leak in virtio_gpu_cleanup_object() Sasha Levin
2020-08-24 16:34   ` Sasha Levin
2020-08-24 16:34   ` Sasha Levin
2020-08-24 16:34 ` [PATCH AUTOSEL 5.8 07/63] ext4: abort the filesystem if failed to async write metadata buffer Sasha Levin
2020-08-24 16:34 ` [PATCH AUTOSEL 5.8 08/63] jbd2: abort journal if free a async write error " Sasha Levin
2020-08-24 16:34 ` [PATCH AUTOSEL 5.8 09/63] ext4: handle option set by mount flags correctly Sasha Levin
2020-08-24 16:34 ` [PATCH AUTOSEL 5.8 10/63] ext4: handle error of ext4_setup_system_zone() on remount Sasha Levin
2020-08-24 16:34 ` [PATCH AUTOSEL 5.8 11/63] ext4: correctly restore system zone info when remount fails Sasha Levin
2020-08-24 16:34 ` [PATCH AUTOSEL 5.8 12/63] fs: prevent BUG_ON in submit_bh_wbc() Sasha Levin
2020-08-24 16:34 ` [PATCH AUTOSEL 5.8 13/63] spi: stm32h7: fix race condition at end of transfer Sasha Levin
2020-08-24 16:34   ` Sasha Levin
2020-08-24 16:34 ` [PATCH AUTOSEL 5.8 14/63] spi: stm32: fix fifo threshold level in case of short transfer Sasha Levin
2020-08-24 16:34   ` Sasha Levin
2020-08-24 16:34 ` [PATCH AUTOSEL 5.8 15/63] spi: stm32: fix stm32_spi_prepare_mbr in case of odd clk_rate Sasha Levin
2020-08-24 16:34   ` Sasha Levin
2020-08-24 16:34 ` [PATCH AUTOSEL 5.8 16/63] spi: stm32: always perform registers configuration prior to transfer Sasha Levin
2020-08-24 16:34   ` Sasha Levin
2020-08-24 16:34 ` [PATCH AUTOSEL 5.8 17/63] drm/amd/powerplay: correct Vega20 cached smu feature state Sasha Levin
2020-08-24 16:34   ` Sasha Levin
2020-08-24 16:34   ` Sasha Levin
2020-08-24 16:34 ` [PATCH AUTOSEL 5.8 18/63] drm/amd/powerplay: correct UVD/VCE PG state on custom pptable uploading Sasha Levin
2020-08-24 16:34   ` Sasha Levin
2020-08-24 16:34   ` Sasha Levin
2020-08-24 16:34 ` [PATCH AUTOSEL 5.8 19/63] drm/amd/display: Fix LFC multiplier changing erratically Sasha Levin
2020-08-24 16:34   ` Sasha Levin
2020-08-24 16:34   ` Sasha Levin
2020-08-24 16:34 ` [PATCH AUTOSEL 5.8 20/63] drm/amd/display: Switch to immediate mode for updating infopackets Sasha Levin
2020-08-24 16:34   ` Sasha Levin
2020-08-24 16:34   ` Sasha Levin
2020-08-24 16:34 ` [PATCH AUTOSEL 5.8 21/63] selftests/bpf: Fix segmentation fault in test_progs Sasha Levin
2020-08-24 16:34 ` [PATCH AUTOSEL 5.8 22/63] libbpf: Handle GCC built-in types for Arm NEON Sasha Levin
2020-08-24 16:34 ` [PATCH AUTOSEL 5.8 23/63] netfilter: avoid ipv6 -> nf_defrag_ipv6 module dependency Sasha Levin
2020-08-24 16:34   ` [Bridge] " Sasha Levin
2020-08-24 16:34 ` [PATCH AUTOSEL 5.8 24/63] libbpf: Prevent overriding errno when logging errors Sasha Levin
2020-08-24 16:34 ` [PATCH AUTOSEL 5.8 25/63] tools/bpftool: Fix compilation warnings in 32-bit mode Sasha Levin
2020-08-24 16:34 ` [PATCH AUTOSEL 5.8 26/63] selftest/bpf: " Sasha Levin
2020-08-24 16:34 ` [PATCH AUTOSEL 5.8 27/63] selftests/bpf: Fix btf_dump test cases on 32-bit arches Sasha Levin
2020-08-24 16:34 ` [PATCH AUTOSEL 5.8 28/63] selftests/bpf: Correct various core_reloc 64-bit assumptions Sasha Levin
2020-08-24 16:34 ` [PATCH AUTOSEL 5.8 29/63] can: j1939: transport: j1939_xtp_rx_dat_one(): compare own packets to detect corruptions Sasha Levin
2020-08-24 16:34 ` [PATCH AUTOSEL 5.8 30/63] dma-pool: fix coherent pool allocations for IOMMU mappings Sasha Levin
2020-08-24 16:34   ` Sasha Levin
2020-08-24 16:34 ` [PATCH AUTOSEL 5.8 31/63] dma-pool: Only allocate from CMA when in same memory zone Sasha Levin
2020-08-24 16:34   ` Sasha Levin
2020-08-24 16:34 ` [PATCH AUTOSEL 5.8 32/63] drivers/net/wan/hdlc_x25: Added needed_headroom and a skb->len check Sasha Levin
2020-08-24 16:34 ` [PATCH AUTOSEL 5.8 33/63] ALSA: hda/realtek: Add model alc298-samsung-headphone Sasha Levin
2020-08-24 16:34   ` Sasha Levin
2020-08-24 16:34 ` [PATCH AUTOSEL 5.8 34/63] s390/cio: add cond_resched() in the slow_eval_known_fn() loop Sasha Levin
2020-08-24 16:34 ` [PATCH AUTOSEL 5.8 35/63] ASoC: wm8994: Avoid attempts to read unreadable registers Sasha Levin
2020-08-24 16:34   ` Sasha Levin
2020-08-24 16:34 ` [PATCH AUTOSEL 5.8 36/63] ALSA: usb-audio: ignore broken processing/extension unit Sasha Levin
2020-08-24 16:34   ` Sasha Levin
2020-08-24 16:34 ` [PATCH AUTOSEL 5.8 37/63] selftests: disable rp_filter for icmp_redirect.sh Sasha Levin
2020-08-24 16:34 ` [PATCH AUTOSEL 5.8 38/63] scsi: fcoe: Fix I/O path allocation Sasha Levin
2020-08-24 16:34   ` [Intel-wired-lan] " Sasha Levin
2020-08-24 16:34 ` [PATCH AUTOSEL 5.8 39/63] scsi: ufs: Fix possible infinite loop in ufshcd_hold Sasha Levin
2020-08-24 16:34   ` Sasha Levin
2020-08-24 16:34   ` Sasha Levin
2020-08-24 16:34 ` [PATCH AUTOSEL 5.8 40/63] scsi: ufs: Improve interrupt handling for shared interrupts Sasha Levin
2020-08-24 16:34 ` [PATCH AUTOSEL 5.8 41/63] scsi: ufs: Clean up completed request without interrupt notification Sasha Levin
2020-08-24 16:34   ` Sasha Levin
2020-08-24 16:34   ` Sasha Levin
2020-08-24 16:34 ` [PATCH AUTOSEL 5.8 42/63] scsi: scsi_debug: Fix scp is NULL errors Sasha Levin
2020-08-24 16:34 ` [PATCH AUTOSEL 5.8 43/63] scsi: qla2xxx: Flush all sessions on zone disable Sasha Levin
2020-08-24 16:34 ` [PATCH AUTOSEL 5.8 44/63] scsi: qla2xxx: Flush I/O " Sasha Levin
2020-08-24 16:34 ` [PATCH AUTOSEL 5.8 45/63] scsi: qla2xxx: Indicate correct supported speeds for Mezz card Sasha Levin
2020-08-24 16:34 ` [PATCH AUTOSEL 5.8 46/63] scsi: qla2xxx: Fix login timeout Sasha Levin
2020-08-24 16:34 ` [PATCH AUTOSEL 5.8 47/63] scsi: qla2xxx: Check if FW supports MQ before enabling Sasha Levin
2020-08-24 16:34 ` [PATCH AUTOSEL 5.8 48/63] scsi: qla2xxx: Fix null pointer access during disconnect from subsystem Sasha Levin
2020-08-24 16:34 ` [PATCH AUTOSEL 5.8 49/63] Revert "scsi: qla2xxx: Fix crash on qla2x00_mailbox_command" Sasha Levin
2020-08-24 16:34 ` [PATCH AUTOSEL 5.8 50/63] macvlan: validate setting of multiple remote source MAC addresses Sasha Levin
2020-08-24 16:34 ` [PATCH AUTOSEL 5.8 51/63] net: gianfar: Add of_node_put() before goto statement Sasha Levin
2020-08-24 16:34 ` [PATCH AUTOSEL 5.8 52/63] drm/amdgpu: disable gfxoff for navy_flounder Sasha Levin
2020-08-24 16:34   ` Sasha Levin
2020-08-24 16:34   ` Sasha Levin
2020-08-24 18:23   ` Alex Deucher
2020-08-24 18:23     ` Alex Deucher
2020-08-24 18:23     ` Alex Deucher
2020-08-30 22:41     ` Sasha Levin
2020-08-30 22:41       ` Sasha Levin
2020-08-30 22:41       ` Sasha Levin
2020-08-24 16:34 ` [PATCH AUTOSEL 5.8 53/63] drm/amdgpu: fix NULL pointer access issue when unloading driver Sasha Levin
2020-08-24 16:34   ` Sasha Levin
2020-08-24 16:34   ` Sasha Levin
2020-08-24 16:34 ` [PATCH AUTOSEL 5.8 54/63] drm/amdkfd: fix the wrong sdma instance query for renoir Sasha Levin
2020-08-24 16:34   ` Sasha Levin
2020-08-24 16:34   ` Sasha Levin
2020-08-24 16:34 ` [PATCH AUTOSEL 5.8 55/63] bpf: Fix a rcu_sched stall issue with bpf task/task_file iterator Sasha Levin
2020-08-24 16:34 ` [PATCH AUTOSEL 5.8 56/63] bpf: Avoid visit same object multiple times Sasha Levin
2020-08-24 16:34 ` [PATCH AUTOSEL 5.8 57/63] ext4: limit the length of per-inode prealloc list Sasha Levin
2020-08-24 16:34 ` [PATCH AUTOSEL 5.8 58/63] Revert "drm/amdgpu: disable gfxoff for navy_flounder" Sasha Levin
2020-08-24 16:34   ` Sasha Levin
2020-08-24 16:34   ` Sasha Levin
2020-08-24 18:24   ` Alex Deucher
2020-08-24 18:24     ` Alex Deucher
2020-08-24 18:24     ` Alex Deucher
2020-08-24 16:34 ` [PATCH AUTOSEL 5.8 59/63] powerpc/perf: Fix soft lockups due to missed interrupt accounting Sasha Levin
2020-08-24 16:34   ` Sasha Levin
2020-08-24 16:35 ` [PATCH AUTOSEL 5.8 60/63] libbpf: Fix map index used in error message Sasha Levin
2020-08-24 16:35 ` [PATCH AUTOSEL 5.8 61/63] bpf: selftests: global_funcs: Check err_str before strstr Sasha Levin
2020-08-24 16:35 ` [PATCH AUTOSEL 5.8 62/63] arm64: Move handling of erratum 1418040 into C code Sasha Levin
2020-08-24 16:35   ` Sasha Levin
2020-08-24 16:35 ` [PATCH AUTOSEL 5.8 63/63] arm64: Allow booting of late CPUs affected by erratum 1418040 Sasha Levin
2020-08-24 16:35   ` Sasha Levin

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20200824163504.605538-4-sashal@kernel.org \
    --to=sashal@kernel.org \
    --cc=adilger@dilger.ca \
    --cc=lczerner@redhat.com \
    --cc=linux-ext4@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=stable@vger.kernel.org \
    --cc=tytso@mit.edu \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.