[PATCH AUTOSEL 4.9 1/8] jbd2: make sure jh have b_transaction set in refile/unfile_buffer

[PATCH AUTOSEL 4.9 1/8] jbd2: make sure jh have b_transaction set in refile/unfile_buffer

[Sasha Levin]

From: Lukas Czerner <lczerner@redhat.com>

[ Upstream commit 24dc9864914eb5813173cfa53313fcd02e4aea7d ]

Callers of __jbd2_journal_unfile_buffer() and
__jbd2_journal_refile_buffer() assume that the b_transaction is set. In
fact if it's not, we can end up with journal_head refcounting errors
leading to crash much later that might be very hard to track down. Add
asserts to make sure that is the case.

We also make sure that b_next_transaction is NULL in
__jbd2_journal_unfile_buffer() since the callers expect that as well and
we should not get into that stage in this state anyway, leading to
problems later on if we do.

Tested with fstests.

Signed-off-by: Lukas Czerner <lczerner@redhat.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20200617092549.6712-1-lczerner@redhat.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 fs/jbd2/transaction.c | 10 ++++++++++
 1 file changed, 10 insertions(+)

diff --git a/fs/jbd2/transaction.c b/fs/jbd2/transaction.c
index 8de458d64134a..1478512ecab3e 100644
--- a/fs/jbd2/transaction.c
+++ b/fs/jbd2/transaction.c
@@ -1896,6 +1896,9 @@ static void __jbd2_journal_temp_unlink_buffer(struct journal_head *jh)
  */
 static void __jbd2_journal_unfile_buffer(struct journal_head *jh)
 {
+	J_ASSERT_JH(jh, jh->b_transaction != NULL);
+	J_ASSERT_JH(jh, jh->b_next_transaction == NULL);
+
 	__jbd2_journal_temp_unlink_buffer(jh);
 	jh->b_transaction = NULL;
 	jbd2_journal_put_journal_head(jh);
@@ -2443,6 +2446,13 @@ void __jbd2_journal_refile_buffer(struct journal_head *jh)
 
 	was_dirty = test_clear_buffer_jbddirty(bh);
 	__jbd2_journal_temp_unlink_buffer(jh);
+
+	/*
+	 * b_transaction must be set, otherwise the new b_transaction won't
+	 * be holding jh reference
+	 */
+	J_ASSERT_JH(jh, jh->b_transaction != NULL);
+
 	/*
 	 * We set b_transaction here because b_next_transaction will inherit
 	 * our jh reference and thus __jbd2_journal_file_buffer() must not
-- 
2.25.1

[PATCH AUTOSEL 4.9 2/8] jbd2: abort journal if free a async write error metadata buffer

[Sasha Levin]

From: "zhangyi (F)" <yi.zhang@huawei.com>

[ Upstream commit c044f3d8360d2ecf831ba2cc9f08cf9fb2c699fb ]

If we free a metadata buffer which has been failed to async write out
in the background, the jbd2 checkpoint procedure will not detect this
failure in jbd2_log_do_checkpoint(), so it may lead to filesystem
inconsistency after cleanup journal tail. This patch abort the journal
if free a buffer has write_io_error flag to prevent potential further
inconsistency.

Signed-off-by: zhangyi (F) <yi.zhang@huawei.com>
Link: https://lore.kernel.org/r/20200620025427.1756360-5-yi.zhang@huawei.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 fs/jbd2/transaction.c | 16 ++++++++++++++++
 1 file changed, 16 insertions(+)

diff --git a/fs/jbd2/transaction.c b/fs/jbd2/transaction.c
index 1478512ecab3e..cfbf5474bccab 100644
--- a/fs/jbd2/transaction.c
+++ b/fs/jbd2/transaction.c
@@ -1990,6 +1990,7 @@ int jbd2_journal_try_to_free_buffers(journal_t *journal,
 {
 	struct buffer_head *head;
 	struct buffer_head *bh;
+	bool has_write_io_error = false;
 	int ret = 0;
 
 	J_ASSERT(PageLocked(page));
@@ -2014,11 +2015,26 @@ int jbd2_journal_try_to_free_buffers(journal_t *journal,
 		jbd_unlock_bh_state(bh);
 		if (buffer_jbd(bh))
 			goto busy;
+
+		/*
+		 * If we free a metadata buffer which has been failed to
+		 * write out, the jbd2 checkpoint procedure will not detect
+		 * this failure and may lead to filesystem inconsistency
+		 * after cleanup journal tail.
+		 */
+		if (buffer_write_io_error(bh)) {
+			pr_err("JBD2: Error while async write back metadata bh %llu.",
+			       (unsigned long long)bh->b_blocknr);
+			has_write_io_error = true;
+		}
 	} while ((bh = bh->b_this_page) != head);
 
 	ret = try_to_free_buffers(page);
 
 busy:
+	if (has_write_io_error)
+		jbd2_journal_abort(journal, -EIO);
+
 	return ret;
 }
 
-- 
2.25.1

[PATCH AUTOSEL 4.9 3/8] fs: prevent BUG_ON in submit_bh_wbc()

[Sasha Levin]

From: Xianting Tian <xianting_tian@126.com>

[ Upstream commit 377254b2cd2252c7c3151b113cbdf93a7736c2e9 ]

If a device is hot-removed --- for example, when a physical device is
unplugged from pcie slot or a nbd device's network is shutdown ---
this can result in a BUG_ON() crash in submit_bh_wbc().  This is
because the when the block device dies, the buffer heads will have
their Buffer_Mapped flag get cleared, leading to the crash in
submit_bh_wbc.

We had attempted to work around this problem in commit a17712c8
("ext4: check superblock mapped prior to committing").  Unfortunately,
it's still possible to hit the BUG_ON(!buffer_mapped(bh)) if the
device dies between when the work-around check in ext4_commit_super()
and when submit_bh_wbh() is finally called:

Code path:
ext4_commit_super
    judge if 'buffer_mapped(sbh)' is false, return <== commit a17712c8
          lock_buffer(sbh)
          ...
          unlock_buffer(sbh)
               __sync_dirty_buffer(sbh,...
                    lock_buffer(sbh)
                        judge if 'buffer_mapped(sbh))' is false, return <== added by this patch
                            submit_bh(...,sbh)
                                submit_bh_wbc(...,sbh,...)

[100722.966497] kernel BUG at fs/buffer.c:3095! <== BUG_ON(!buffer_mapped(bh))' in submit_bh_wbc()
[100722.966503] invalid opcode: 0000 [#1] SMP
[100722.966566] task: ffff8817e15a9e40 task.stack: ffffc90024744000
[100722.966574] RIP: 0010:submit_bh_wbc+0x180/0x190
[100722.966575] RSP: 0018:ffffc90024747a90 EFLAGS: 00010246
[100722.966576] RAX: 0000000000620005 RBX: ffff8818a80603a8 RCX: 0000000000000000
[100722.966576] RDX: ffff8818a80603a8 RSI: 0000000000020800 RDI: 0000000000000001
[100722.966577] RBP: ffffc90024747ac0 R08: 0000000000000000 R09: ffff88207f94170d
[100722.966578] R10: 00000000000437c8 R11: 0000000000000001 R12: 0000000000020800
[100722.966578] R13: 0000000000000001 R14: 000000000bf9a438 R15: ffff88195f333000
[100722.966580] FS:  00007fa2eee27700(0000) GS:ffff88203d840000(0000) knlGS:0000000000000000
[100722.966580] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[100722.966581] CR2: 0000000000f0b008 CR3: 000000201a622003 CR4: 00000000007606e0
[100722.966582] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[100722.966583] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[100722.966583] PKRU: 55555554
[100722.966583] Call Trace:
[100722.966588]  __sync_dirty_buffer+0x6e/0xd0
[100722.966614]  ext4_commit_super+0x1d8/0x290 [ext4]
[100722.966626]  __ext4_std_error+0x78/0x100 [ext4]
[100722.966635]  ? __ext4_journal_get_write_access+0xca/0x120 [ext4]
[100722.966646]  ext4_reserve_inode_write+0x58/0xb0 [ext4]
[100722.966655]  ? ext4_dirty_inode+0x48/0x70 [ext4]
[100722.966663]  ext4_mark_inode_dirty+0x53/0x1e0 [ext4]
[100722.966671]  ? __ext4_journal_start_sb+0x6d/0xf0 [ext4]
[100722.966679]  ext4_dirty_inode+0x48/0x70 [ext4]
[100722.966682]  __mark_inode_dirty+0x17f/0x350
[100722.966686]  generic_update_time+0x87/0xd0
[100722.966687]  touch_atime+0xa9/0xd0
[100722.966690]  generic_file_read_iter+0xa09/0xcd0
[100722.966694]  ? page_cache_tree_insert+0xb0/0xb0
[100722.966704]  ext4_file_read_iter+0x4a/0x100 [ext4]
[100722.966707]  ? __inode_security_revalidate+0x4f/0x60
[100722.966709]  __vfs_read+0xec/0x160
[100722.966711]  vfs_read+0x8c/0x130
[100722.966712]  SyS_pread64+0x87/0xb0
[100722.966716]  do_syscall_64+0x67/0x1b0
[100722.966719]  entry_SYSCALL64_slow_path+0x25/0x25

To address this, add the check of 'buffer_mapped(bh)' to
__sync_dirty_buffer().  This also has the benefit of fixing this for
other file systems.

With this addition, we can drop the workaround in ext4_commit_supper().

[ Commit description rewritten by tytso. ]

Signed-off-by: Xianting Tian <xianting_tian@126.com>
Link: https://lore.kernel.org/r/1596211825-8750-1-git-send-email-xianting_tian@126.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 fs/buffer.c     | 9 +++++++++
 fs/ext4/super.c | 7 -------
 2 files changed, 9 insertions(+), 7 deletions(-)

diff --git a/fs/buffer.c b/fs/buffer.c
index a89be9741d125..52f1a60417d1d 100644
--- a/fs/buffer.c
+++ b/fs/buffer.c
@@ -3203,6 +3203,15 @@ int __sync_dirty_buffer(struct buffer_head *bh, int op_flags)
 	WARN_ON(atomic_read(&bh->b_count) < 1);
 	lock_buffer(bh);
 	if (test_clear_buffer_dirty(bh)) {
+		/*
+		 * The bh should be mapped, but it might not be if the
+		 * device was hot-removed. Not much we can do but fail the I/O.
+		 */
+		if (!buffer_mapped(bh)) {
+			unlock_buffer(bh);
+			return -EIO;
+		}
+
 		get_bh(bh);
 		bh->b_end_io = end_buffer_write_sync;
 		ret = submit_bh(REQ_OP_WRITE, op_flags, bh);
diff --git a/fs/ext4/super.c b/fs/ext4/super.c
index 370e4273042c5..472fa29c6f604 100644
--- a/fs/ext4/super.c
+++ b/fs/ext4/super.c
@@ -4680,13 +4680,6 @@ static int ext4_commit_super(struct super_block *sb, int sync)
 	if (!sbh || block_device_ejected(sb))
 		return error;
 
-	/*
-	 * The superblock bh should be mapped, but it might not be if the
-	 * device was hot-removed. Not much we can do but fail the I/O.
-	 */
-	if (!buffer_mapped(sbh))
-		return error;
-
 	/*
 	 * If the file system is mounted read-only, don't update the
 	 * superblock write time.  This avoids updating the superblock
-- 
2.25.1

[PATCH AUTOSEL 4.9 4/8] s390/cio: add cond_resched() in the slow_eval_known_fn() loop

[Sasha Levin]

From: Vineeth Vijayan <vneethv@linux.ibm.com>

[ Upstream commit 0b8eb2ee9da1e8c9b8082f404f3948aa82a057b2 ]

The scanning through subchannels during the time of an event could
take significant amount of time in case of platforms with lots of
known subchannels. This might result in higher scheduling latencies
for other tasks especially on systems with a single CPU. Add
cond_resched() call, as the loop in slow_eval_known_fn() can be
executed for a longer duration.

Reviewed-by: Peter Oberparleiter <oberpar@linux.ibm.com>
Signed-off-by: Vineeth Vijayan <vneethv@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/s390/cio/css.c | 5 +++++
 1 file changed, 5 insertions(+)

diff --git a/drivers/s390/cio/css.c b/drivers/s390/cio/css.c
index 39a2b0cde9e42..d81fdcd6a1fe0 100644
--- a/drivers/s390/cio/css.c
+++ b/drivers/s390/cio/css.c
@@ -529,6 +529,11 @@ static int slow_eval_known_fn(struct subchannel *sch, void *data)
 		rc = css_evaluate_known_subchannel(sch, 1);
 		if (rc == -EAGAIN)
 			css_schedule_eval(sch->schid);
+		/*
+		 * The loop might take long time for platforms with lots of
+		 * known devices. Allow scheduling here.
+		 */
+		cond_resched();
 	}
 	return 0;
 }
-- 
2.25.1

[PATCH AUTOSEL 4.9 5/8] scsi: ufs: Fix possible infinite loop in ufshcd_hold

[Sasha Levin]

From: Stanley Chu <stanley.chu@mediatek.com>

[ Upstream commit 93b6c5db06028a3b55122bbb74d0715dd8ca4ae0 ]

In ufshcd_suspend(), after clk-gating is suspended and link is set
as Hibern8 state, ufshcd_hold() is still possibly invoked before
ufshcd_suspend() returns. For example, MediaTek's suspend vops may
issue UIC commands which would call ufshcd_hold() during the command
issuing flow.

Now if UFSHCD_CAP_HIBERN8_WITH_CLK_GATING capability is enabled,
then ufshcd_hold() may enter infinite loops because there is no
clk-ungating work scheduled or pending. In this case, ufshcd_hold()
shall just bypass, and keep the link as Hibern8 state.

Link: https://lore.kernel.org/r/20200809050734.18740-1-stanley.chu@mediatek.com
Reviewed-by: Avri Altman <avri.altman@wdc.com>
Co-developed-by: Andy Teng <andy.teng@mediatek.com>
Signed-off-by: Andy Teng <andy.teng@mediatek.com>
Signed-off-by: Stanley Chu <stanley.chu@mediatek.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/scsi/ufs/ufshcd.c | 5 ++++-
 1 file changed, 4 insertions(+), 1 deletion(-)

diff --git a/drivers/scsi/ufs/ufshcd.c b/drivers/scsi/ufs/ufshcd.c
index af4b0a2021d6c..1eee82b18be4e 100644
--- a/drivers/scsi/ufs/ufshcd.c
+++ b/drivers/scsi/ufs/ufshcd.c
@@ -657,6 +657,7 @@ static void ufshcd_ungate_work(struct work_struct *work)
 int ufshcd_hold(struct ufs_hba *hba, bool async)
 {
 	int rc = 0;
+	bool flush_result;
 	unsigned long flags;
 
 	if (!ufshcd_is_clkgating_allowed(hba))
@@ -688,7 +689,9 @@ int ufshcd_hold(struct ufs_hba *hba, bool async)
 				break;
 			}
 			spin_unlock_irqrestore(hba->host->host_lock, flags);
-			flush_work(&hba->clk_gating.ungate_work);
+			flush_result = flush_work(&hba->clk_gating.ungate_work);
+			if (hba->clk_gating.is_suspended && !flush_result)
+				goto out;
 			spin_lock_irqsave(hba->host->host_lock, flags);
 			goto start;
 		}
-- 
2.25.1

[PATCH AUTOSEL 4.9 5/8] scsi: ufs: Fix possible infinite loop in ufshcd_hold

[Sasha Levin]

From: Stanley Chu <stanley.chu@mediatek.com>

[ Upstream commit 93b6c5db06028a3b55122bbb74d0715dd8ca4ae0 ]

In ufshcd_suspend(), after clk-gating is suspended and link is set
as Hibern8 state, ufshcd_hold() is still possibly invoked before
ufshcd_suspend() returns. For example, MediaTek's suspend vops may
issue UIC commands which would call ufshcd_hold() during the command
issuing flow.

Now if UFSHCD_CAP_HIBERN8_WITH_CLK_GATING capability is enabled,
then ufshcd_hold() may enter infinite loops because there is no
clk-ungating work scheduled or pending. In this case, ufshcd_hold()
shall just bypass, and keep the link as Hibern8 state.

Link: https://lore.kernel.org/r/20200809050734.18740-1-stanley.chu@mediatek.com
Reviewed-by: Avri Altman <avri.altman@wdc.com>
Co-developed-by: Andy Teng <andy.teng@mediatek.com>
Signed-off-by: Andy Teng <andy.teng@mediatek.com>
Signed-off-by: Stanley Chu <stanley.chu@mediatek.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/scsi/ufs/ufshcd.c | 5 ++++-
 1 file changed, 4 insertions(+), 1 deletion(-)

diff --git a/drivers/scsi/ufs/ufshcd.c b/drivers/scsi/ufs/ufshcd.c
index af4b0a2021d6c..1eee82b18be4e 100644
--- a/drivers/scsi/ufs/ufshcd.c
+++ b/drivers/scsi/ufs/ufshcd.c
@@ -657,6 +657,7 @@ static void ufshcd_ungate_work(struct work_struct *work)
 int ufshcd_hold(struct ufs_hba *hba, bool async)
 {
 	int rc = 0;
+	bool flush_result;
 	unsigned long flags;
 
 	if (!ufshcd_is_clkgating_allowed(hba))
@@ -688,7 +689,9 @@ int ufshcd_hold(struct ufs_hba *hba, bool async)
 				break;
 			}
 			spin_unlock_irqrestore(hba->host->host_lock, flags);
-			flush_work(&hba->clk_gating.ungate_work);
+			flush_result = flush_work(&hba->clk_gating.ungate_work);
+			if (hba->clk_gating.is_suspended && !flush_result)
+				goto out;
 			spin_lock_irqsave(hba->host->host_lock, flags);
 			goto start;
 		}
-- 
2.25.1


_______________________________________________
Linux-mediatek mailing list
Linux-mediatek@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-mediatek

[PATCH AUTOSEL 4.9 5/8] scsi: ufs: Fix possible infinite loop in ufshcd_hold

[Sasha Levin]

From: Stanley Chu <stanley.chu@mediatek.com>

[ Upstream commit 93b6c5db06028a3b55122bbb74d0715dd8ca4ae0 ]

In ufshcd_suspend(), after clk-gating is suspended and link is set
as Hibern8 state, ufshcd_hold() is still possibly invoked before
ufshcd_suspend() returns. For example, MediaTek's suspend vops may
issue UIC commands which would call ufshcd_hold() during the command
issuing flow.

Now if UFSHCD_CAP_HIBERN8_WITH_CLK_GATING capability is enabled,
then ufshcd_hold() may enter infinite loops because there is no
clk-ungating work scheduled or pending. In this case, ufshcd_hold()
shall just bypass, and keep the link as Hibern8 state.

Link: https://lore.kernel.org/r/20200809050734.18740-1-stanley.chu@mediatek.com
Reviewed-by: Avri Altman <avri.altman@wdc.com>
Co-developed-by: Andy Teng <andy.teng@mediatek.com>
Signed-off-by: Andy Teng <andy.teng@mediatek.com>
Signed-off-by: Stanley Chu <stanley.chu@mediatek.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/scsi/ufs/ufshcd.c | 5 ++++-
 1 file changed, 4 insertions(+), 1 deletion(-)

diff --git a/drivers/scsi/ufs/ufshcd.c b/drivers/scsi/ufs/ufshcd.c
index af4b0a2021d6c..1eee82b18be4e 100644
--- a/drivers/scsi/ufs/ufshcd.c
+++ b/drivers/scsi/ufs/ufshcd.c
@@ -657,6 +657,7 @@ static void ufshcd_ungate_work(struct work_struct *work)
 int ufshcd_hold(struct ufs_hba *hba, bool async)
 {
 	int rc = 0;
+	bool flush_result;
 	unsigned long flags;
 
 	if (!ufshcd_is_clkgating_allowed(hba))
@@ -688,7 +689,9 @@ int ufshcd_hold(struct ufs_hba *hba, bool async)
 				break;
 			}
 			spin_unlock_irqrestore(hba->host->host_lock, flags);
-			flush_work(&hba->clk_gating.ungate_work);
+			flush_result = flush_work(&hba->clk_gating.ungate_work);
+			if (hba->clk_gating.is_suspended && !flush_result)
+				goto out;
 			spin_lock_irqsave(hba->host->host_lock, flags);
 			goto start;
 		}
-- 
2.25.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH AUTOSEL 4.9 6/8] scsi: ufs: Improve interrupt handling for shared interrupts

[Sasha Levin]

From: Adrian Hunter <adrian.hunter@intel.com>

[ Upstream commit 127d5f7c4b653b8be5eb3b2c7bbe13728f9003ff ]

For shared interrupts, the interrupt status might be zero, so check that
first.

Link: https://lore.kernel.org/r/20200811133936.19171-2-adrian.hunter@intel.com
Reviewed-by: Avri Altman <avri.altman@wdc.com>
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/scsi/ufs/ufshcd.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/drivers/scsi/ufs/ufshcd.c b/drivers/scsi/ufs/ufshcd.c
index 1eee82b18be4e..b0841a3fab522 100644
--- a/drivers/scsi/ufs/ufshcd.c
+++ b/drivers/scsi/ufs/ufshcd.c
@@ -4398,7 +4398,7 @@ static void ufshcd_sl_intr(struct ufs_hba *hba, u32 intr_status)
  */
 static irqreturn_t ufshcd_intr(int irq, void *__hba)
 {
-	u32 intr_status, enabled_intr_status;
+	u32 intr_status, enabled_intr_status = 0;
 	irqreturn_t retval = IRQ_NONE;
 	struct ufs_hba *hba = __hba;
 	int retries = hba->nutrs;
@@ -4412,7 +4412,7 @@ static irqreturn_t ufshcd_intr(int irq, void *__hba)
 	 * read, make sure we handle them by checking the interrupt status
 	 * again in a loop until we process all of the reqs before returning.
 	 */
-	do {
+	while (intr_status && retries--) {
 		enabled_intr_status =
 			intr_status & ufshcd_readl(hba, REG_INTERRUPT_ENABLE);
 		if (intr_status)
@@ -4423,7 +4423,7 @@ static irqreturn_t ufshcd_intr(int irq, void *__hba)
 		}
 
 		intr_status = ufshcd_readl(hba, REG_INTERRUPT_STATUS);
-	} while (intr_status && --retries);
+	}
 
 	spin_unlock(hba->host->host_lock);
 	return retval;
-- 
2.25.1

[PATCH AUTOSEL 4.9 7/8] net: gianfar: Add of_node_put() before goto statement

[Sasha Levin]

From: Sumera Priyadarsini <sylphrenadin@gmail.com>

[ Upstream commit 989e4da042ca4a56bbaca9223d1a93639ad11e17 ]

Every iteration of for_each_available_child_of_node() decrements
reference count of the previous node, however when control
is transferred from the middle of the loop, as in the case of
a return or break or goto, there is no decrement thus ultimately
resulting in a memory leak.

Fix a potential memory leak in gianfar.c by inserting of_node_put()
before the goto statement.

Issue found with Coccinelle.

Signed-off-by: Sumera Priyadarsini <sylphrenadin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/freescale/gianfar.c | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

diff --git a/drivers/net/ethernet/freescale/gianfar.c b/drivers/net/ethernet/freescale/gianfar.c
index b665d27f8e299..95ab44aa0eeab 100644
--- a/drivers/net/ethernet/freescale/gianfar.c
+++ b/drivers/net/ethernet/freescale/gianfar.c
@@ -844,8 +844,10 @@ static int gfar_of_init(struct platform_device *ofdev, struct net_device **pdev)
 				continue;
 
 			err = gfar_parse_group(child, priv, model);
-			if (err)
+			if (err) {
+				of_node_put(child);
 				goto err_grp_init;
+			}
 		}
 	} else { /* SQ_SG_MODE */
 		err = gfar_parse_group(np, priv, model);
-- 
2.25.1

[PATCH AUTOSEL 4.9 8/8] powerpc/perf: Fix soft lockups due to missed interrupt accounting

[Sasha Levin]

From: Athira Rajeev <atrajeev@linux.vnet.ibm.com>

[ Upstream commit 17899eaf88d689529b866371344c8f269ba79b5f ]

Performance monitor interrupt handler checks if any counter has
overflown and calls record_and_restart() in core-book3s which invokes
perf_event_overflow() to record the sample information. Apart from
creating sample, perf_event_overflow() also does the interrupt and
period checks via perf_event_account_interrupt().

Currently we record information only if the SIAR (Sampled Instruction
Address Register) valid bit is set (using siar_valid() check) and
hence the interrupt check.

But it is possible that we do sampling for some events that are not
generating valid SIAR, and hence there is no chance to disable the
event if interrupts are more than max_samples_per_tick. This leads to
soft lockup.

Fix this by adding perf_event_account_interrupt() in the invalid SIAR
code path for a sampling event. ie if SIAR is invalid, just do
interrupt check and don't record the sample information.

Reported-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Tested-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/1596717992-7321-1-git-send-email-atrajeev@linux.vnet.ibm.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/powerpc/perf/core-book3s.c | 4 ++++
 1 file changed, 4 insertions(+)

diff --git a/arch/powerpc/perf/core-book3s.c b/arch/powerpc/perf/core-book3s.c
index ba49ae6625f1b..a10b67df83bae 100644
--- a/arch/powerpc/perf/core-book3s.c
+++ b/arch/powerpc/perf/core-book3s.c
@@ -2042,6 +2042,10 @@ static void record_and_restart(struct perf_event *event, unsigned long val,
 
 		if (perf_event_overflow(event, &data, regs))
 			power_pmu_stop(event, 0);
+	} else if (period) {
+		/* Account for interrupt in case of invalid SIAR */
+		if (perf_event_account_interrupt(event))
+			power_pmu_stop(event, 0);
 	}
 }
 
-- 
2.25.1

[PATCH AUTOSEL 4.9 8/8] powerpc/perf: Fix soft lockups due to missed interrupt accounting

[Sasha Levin]

From: Athira Rajeev <atrajeev@linux.vnet.ibm.com>

[ Upstream commit 17899eaf88d689529b866371344c8f269ba79b5f ]

Performance monitor interrupt handler checks if any counter has
overflown and calls record_and_restart() in core-book3s which invokes
perf_event_overflow() to record the sample information. Apart from
creating sample, perf_event_overflow() also does the interrupt and
period checks via perf_event_account_interrupt().

Currently we record information only if the SIAR (Sampled Instruction
Address Register) valid bit is set (using siar_valid() check) and
hence the interrupt check.

But it is possible that we do sampling for some events that are not
generating valid SIAR, and hence there is no chance to disable the
event if interrupts are more than max_samples_per_tick. This leads to
soft lockup.

Fix this by adding perf_event_account_interrupt() in the invalid SIAR
code path for a sampling event. ie if SIAR is invalid, just do
interrupt check and don't record the sample information.

Reported-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Tested-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/1596717992-7321-1-git-send-email-atrajeev@linux.vnet.ibm.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/powerpc/perf/core-book3s.c | 4 ++++
 1 file changed, 4 insertions(+)

diff --git a/arch/powerpc/perf/core-book3s.c b/arch/powerpc/perf/core-book3s.c
index ba49ae6625f1b..a10b67df83bae 100644
--- a/arch/powerpc/perf/core-book3s.c
+++ b/arch/powerpc/perf/core-book3s.c
@@ -2042,6 +2042,10 @@ static void record_and_restart(struct perf_event *event, unsigned long val,
 
 		if (perf_event_overflow(event, &data, regs))
 			power_pmu_stop(event, 0);
+	} else if (period) {
+		/* Account for interrupt in case of invalid SIAR */
+		if (perf_event_account_interrupt(event))
+			power_pmu_stop(event, 0);
 	}
 }
 
-- 
2.25.1