All of lore.kernel.org
 help / color / mirror / Atom feed
From: Badhri Jagan Sridharan <badhri@google.com>
To: Guenter Roeck <linux@roeck-us.net>,
	Heikki Krogerus <heikki.krogerus@linux.intel.com>,
	Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: linux-usb@vger.kernel.org, linux-kernel@vger.kernel.org,
	Badhri Jagan Sridharan <badhri@google.com>
Subject: [PATCH v6 07/14] usb: typec: tcpci_maxim: Chip level TCPC driver
Date: Mon, 31 Aug 2020 19:59:20 -0700	[thread overview]
Message-ID: <20200901025927.3596190-8-badhri@google.com> (raw)
In-Reply-To: <20200901025927.3596190-1-badhri@google.com>

Chip level TCPC driver for Maxim's TCPCI implementation.
This TCPC implementation does not support the following
commands: COMMAND.SinkVbus, COMMAND.SourceVbusDefaultVoltage,
COMMAND.SourceVbusHighVoltage. Instead the sinking and sourcing
from vbus is supported by writes to custom registers.

Signed-off-by: Badhri Jagan Sridharan <badhri@google.com>
---
Changes since v1:
- Changing patch version to v6 to fix version number confusion.
- Removed setting USB_PSY and terminating description with period as
  suggested by Randy.
---
 drivers/usb/typec/tcpm/Kconfig       |   5 +
 drivers/usb/typec/tcpm/Makefile      |  13 +-
 drivers/usb/typec/tcpm/tcpci.h       |   1 +
 drivers/usb/typec/tcpm/tcpci_maxim.c | 474 +++++++++++++++++++++++++++
 4 files changed, 487 insertions(+), 6 deletions(-)
 create mode 100644 drivers/usb/typec/tcpm/tcpci_maxim.c

diff --git a/drivers/usb/typec/tcpm/Kconfig b/drivers/usb/typec/tcpm/Kconfig
index fa3f39336246..dd0d446a4613 100644
--- a/drivers/usb/typec/tcpm/Kconfig
+++ b/drivers/usb/typec/tcpm/Kconfig
@@ -27,6 +27,11 @@ config TYPEC_RT1711H
 	  Type-C Port Controller Manager to provide USB PD and USB
 	  Type-C functionalities.
 
+config TYPEC_TCPCI_MAXIM
+	tristate "Maxim TCPCI based Type-C chip driver"
+	help
+	  MAXIM TCPCI based Type-C chip driver.
+
 endif # TYPEC_TCPCI
 
 config TYPEC_FUSB302
diff --git a/drivers/usb/typec/tcpm/Makefile b/drivers/usb/typec/tcpm/Makefile
index a5ff6c8eb892..58d001cf0dd2 100644
--- a/drivers/usb/typec/tcpm/Makefile
+++ b/drivers/usb/typec/tcpm/Makefile
@@ -1,7 +1,8 @@
 # SPDX-License-Identifier: GPL-2.0
-obj-$(CONFIG_TYPEC_TCPM)	+= tcpm.o
-obj-$(CONFIG_TYPEC_FUSB302)	+= fusb302.o
-obj-$(CONFIG_TYPEC_WCOVE)	+= typec_wcove.o
-typec_wcove-y			:= wcove.o
-obj-$(CONFIG_TYPEC_TCPCI)	+= tcpci.o
-obj-$(CONFIG_TYPEC_RT1711H)	+= tcpci_rt1711h.o
+obj-$(CONFIG_TYPEC_TCPM)		+= tcpm.o
+obj-$(CONFIG_TYPEC_FUSB302)		+= fusb302.o
+obj-$(CONFIG_TYPEC_WCOVE)		+= typec_wcove.o
+typec_wcove-y				:= wcove.o
+obj-$(CONFIG_TYPEC_TCPCI)		+= tcpci.o
+obj-$(CONFIG_TYPEC_RT1711H)		+= tcpci_rt1711h.o
+obj-$(CONFIG_TYPEC_TCPCI_MAXIM)		+= tcpci_maxim.o
diff --git a/drivers/usb/typec/tcpm/tcpci.h b/drivers/usb/typec/tcpm/tcpci.h
index 4d441bdf24d5..82f021a82456 100644
--- a/drivers/usb/typec/tcpm/tcpci.h
+++ b/drivers/usb/typec/tcpm/tcpci.h
@@ -109,6 +109,7 @@
 
 #define TCPC_RX_BYTE_CNT		0x30
 #define TCPC_RX_BUF_FRAME_TYPE		0x31
+#define TCPC_RX_BUF_FRAME_TYPE_SOP	0
 #define TCPC_RX_HDR			0x32
 #define TCPC_RX_DATA			0x34 /* through 0x4f */
 
diff --git a/drivers/usb/typec/tcpm/tcpci_maxim.c b/drivers/usb/typec/tcpm/tcpci_maxim.c
new file mode 100644
index 000000000000..b61f290a8f96
--- /dev/null
+++ b/drivers/usb/typec/tcpm/tcpci_maxim.c
@@ -0,0 +1,474 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2020, Google LLC
+ *
+ * MAXIM TCPCI based TCPC driver
+ */
+
+#include <linux/gpio.h>
+#include <linux/gpio/consumer.h>
+#include <linux/interrupt.h>
+#include <linux/i2c.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/of_gpio.h>
+#include <linux/regmap.h>
+#include <linux/usb/pd.h>
+#include <linux/usb/tcpm.h>
+#include <linux/usb/typec.h>
+
+#include "tcpci.h"
+
+#define PD_ACTIVITY_TIMEOUT_MS				10000
+
+#define TCPC_VENDOR_ALERT				0x80
+
+#define TCPC_RECEIVE_BUFFER_COUNT_OFFSET		0
+#define TCPC_RECEIVE_BUFFER_FRAME_TYPE_OFFSET		1
+#define TCPC_RECEIVE_BUFFER_RX_BYTE_BUF_OFFSET		2
+
+/*
+ * LongMessage not supported, hence 32 bytes for buf to be read from RECEIVE_BUFFER.
+ * DEVICE_CAPABILITIES_2.LongMessage = 0, the value in READABLE_BYTE_COUNT reg shall be
+ * less than or equal to 31. Since, RECEIVE_BUFFER len = 31 + 1(READABLE_BYTE_COUNT).
+ */
+#define TCPC_RECEIVE_BUFFER_LEN				32
+
+#define MAX_BUCK_BOOST_SID				0x69
+#define MAX_BUCK_BOOST_OP				0xb9
+#define MAX_BUCK_BOOST_OFF				0
+#define MAX_BUCK_BOOST_SOURCE				0xa
+#define MAX_BUCK_BOOST_SINK				0x5
+
+struct max_tcpci_chip {
+	struct tcpci_data data;
+	struct tcpci *tcpci;
+	struct device *dev;
+	struct i2c_client *client;
+	struct tcpm_port *port;
+};
+
+static const struct regmap_range max_tcpci_tcpci_range[] = {
+	regmap_reg_range(0x00, 0x95)
+};
+
+const struct regmap_access_table max_tcpci_tcpci_write_table = {
+	.yes_ranges = max_tcpci_tcpci_range,
+	.n_yes_ranges = ARRAY_SIZE(max_tcpci_tcpci_range),
+};
+
+static const struct regmap_config max_tcpci_regmap_config = {
+	.reg_bits = 8,
+	.val_bits = 8,
+	.max_register = 0x95,
+	.wr_table = &max_tcpci_tcpci_write_table,
+};
+
+static struct max_tcpci_chip *tdata_to_max_tcpci(struct tcpci_data *tdata)
+{
+	return container_of(tdata, struct max_tcpci_chip, data);
+}
+
+static int max_tcpci_read16(struct max_tcpci_chip *chip, unsigned int reg, u16 *val)
+{
+	return regmap_raw_read(chip->data.regmap, reg, val, sizeof(u16));
+}
+
+static int max_tcpci_write16(struct max_tcpci_chip *chip, unsigned int reg, u16 val)
+{
+	return regmap_raw_write(chip->data.regmap, reg, &val, sizeof(u16));
+}
+
+static int max_tcpci_read8(struct max_tcpci_chip *chip, unsigned int reg, u8 *val)
+{
+	return regmap_raw_read(chip->data.regmap, reg, val, sizeof(u8));
+}
+
+static int max_tcpci_write8(struct max_tcpci_chip *chip, unsigned int reg, u8 val)
+{
+	return regmap_raw_write(chip->data.regmap, reg, &val, sizeof(u8));
+}
+
+static void max_tcpci_init_regs(struct max_tcpci_chip *chip)
+{
+	u16 alert_mask = 0;
+	int ret;
+
+	ret = max_tcpci_write16(chip, TCPC_ALERT, 0xffff);
+	if (ret < 0) {
+		dev_err(chip->dev, "Error writing to TCPC_ALERT ret:%d\n", ret);
+		return;
+	}
+
+	ret = max_tcpci_write16(chip, TCPC_VENDOR_ALERT, 0xffff);
+	if (ret < 0) {
+		dev_err(chip->dev, "Error writing to TCPC_VENDOR_ALERT ret:%d\n", ret);
+		return;
+	}
+
+	alert_mask = TCPC_ALERT_TX_SUCCESS | TCPC_ALERT_TX_DISCARDED | TCPC_ALERT_TX_FAILED |
+		TCPC_ALERT_RX_HARD_RST | TCPC_ALERT_RX_STATUS | TCPC_ALERT_CC_STATUS |
+		TCPC_ALERT_VBUS_DISCNCT | TCPC_ALERT_RX_BUF_OVF | TCPC_ALERT_POWER_STATUS;
+
+	ret = max_tcpci_write16(chip, TCPC_ALERT_MASK, alert_mask);
+	if (ret < 0) {
+		dev_err(chip->dev, "Error writing to TCPC_ALERT_MASK ret:%d\n", ret);
+		return;
+	}
+
+	/* Enable vbus voltage monitoring and voltage alerts */
+	ret = max_tcpci_write8(chip, TCPC_POWER_CTRL, 0);
+	if (ret < 0) {
+		dev_err(chip->dev, "Error writing to TCPC_POWER_CTRL ret:%d\n", ret);
+		return;
+	}
+}
+
+static void process_rx(struct max_tcpci_chip *chip, u16 status)
+{
+	struct pd_message msg;
+	u8 count, frame_type, rx_buf[TCPC_RECEIVE_BUFFER_LEN];
+	int ret, payload_index;
+	u8 *rx_buf_ptr;
+
+	/*
+	 * READABLE_BYTE_COUNT: Indicates the number of bytes in the RX_BUF_BYTE_x registers
+	 * plus one (for the RX_BUF_FRAME_TYPE) Table 4-36.
+	 * Read the count and frame type.
+	 */
+	ret = regmap_raw_read(chip->data.regmap, TCPC_RX_BYTE_CNT, rx_buf, 2);
+	if (ret < 0) {
+		dev_err(chip->dev, "TCPC_RX_BYTE_CNT read failed ret:%d", ret);
+		return;
+	}
+
+	count = rx_buf[TCPC_RECEIVE_BUFFER_COUNT_OFFSET];
+	frame_type = rx_buf[TCPC_RECEIVE_BUFFER_FRAME_TYPE_OFFSET];
+
+	if (count == 0 || frame_type != TCPC_RX_BUF_FRAME_TYPE_SOP) {
+		max_tcpci_write16(chip, TCPC_ALERT, TCPC_ALERT_RX_STATUS);
+		dev_err(chip->dev, "%s", count ==  0 ? "error: count is 0" :
+			"error frame_type is not SOP");
+		return;
+	}
+
+	if (count > sizeof(struct pd_message) || count + 1 > TCPC_RECEIVE_BUFFER_LEN) {
+		dev_err(chip->dev, "Invalid TCPC_RX_BYTE_CNT %d", count);
+		return;
+	}
+
+	/*
+	 * Read count + 1 as RX_BUF_BYTE_x is hidden and can only be read through
+	 * TCPC_RX_BYTE_CNT
+	 */
+	count += 1;
+	ret = regmap_raw_read(chip->data.regmap, TCPC_RX_BYTE_CNT, rx_buf, count);
+	if (ret < 0) {
+		dev_err(chip->dev, "Error: TCPC_RX_BYTE_CNT read failed: %d", ret);
+		return;
+	}
+
+	rx_buf_ptr = rx_buf + TCPC_RECEIVE_BUFFER_RX_BYTE_BUF_OFFSET;
+	msg.header = cpu_to_le16(*(u16 *)rx_buf_ptr);
+	rx_buf_ptr = rx_buf_ptr + sizeof(msg.header);
+	for (payload_index = 0; payload_index < pd_header_cnt_le(msg.header); payload_index++,
+	     rx_buf_ptr += sizeof(msg.payload[0]))
+		msg.payload[payload_index] = cpu_to_le32(*(u32 *)rx_buf_ptr);
+
+	/*
+	 * Read complete, clear RX status alert bit.
+	 * Clear overflow as well if set.
+	 */
+	ret = max_tcpci_write16(chip, TCPC_ALERT, status & TCPC_ALERT_RX_BUF_OVF ?
+				TCPC_ALERT_RX_STATUS | TCPC_ALERT_RX_BUF_OVF :
+				TCPC_ALERT_RX_STATUS);
+	if (ret < 0)
+		return;
+
+	tcpm_pd_receive(chip->port, &msg);
+}
+
+static int max_tcpci_set_vbus(struct tcpci *tcpci, struct tcpci_data *tdata, bool source, bool sink)
+{
+	struct max_tcpci_chip *chip = tdata_to_max_tcpci(tdata);
+	u8 buffer_source[2] = {MAX_BUCK_BOOST_OP, MAX_BUCK_BOOST_SOURCE};
+	u8 buffer_sink[2] = {MAX_BUCK_BOOST_OP, MAX_BUCK_BOOST_SINK};
+	u8 buffer_none[2] = {MAX_BUCK_BOOST_OP, MAX_BUCK_BOOST_OFF};
+	struct i2c_client *i2c = chip->client;
+	int ret;
+
+	struct i2c_msg msgs[] = {
+		{
+			.addr = MAX_BUCK_BOOST_SID,
+			.flags = i2c->flags & I2C_M_TEN,
+			.len = 2,
+			.buf = source ? buffer_source : sink ? buffer_sink : buffer_none,
+		},
+	};
+
+	if (source && sink) {
+		dev_err(chip->dev, "Both source and sink set\n");
+		return -EINVAL;
+	}
+
+	ret = i2c_transfer(i2c->adapter, msgs, 1);
+
+	return  ret < 0 ? ret : 1;
+}
+
+static void process_power_status(struct max_tcpci_chip *chip)
+{
+	u8 pwr_status;
+	int ret;
+
+	ret = max_tcpci_read8(chip, TCPC_POWER_STATUS, &pwr_status);
+	if (ret < 0)
+		return;
+
+	if (pwr_status == 0xff)
+		max_tcpci_init_regs(chip);
+	else
+		tcpm_vbus_change(chip->port);
+}
+
+static void process_tx(struct max_tcpci_chip *chip, u16 status)
+{
+	if (status & TCPC_ALERT_TX_SUCCESS)
+		tcpm_pd_transmit_complete(chip->port, TCPC_TX_SUCCESS);
+	else if (status & TCPC_ALERT_TX_DISCARDED)
+		tcpm_pd_transmit_complete(chip->port, TCPC_TX_DISCARDED);
+	else if (status & TCPC_ALERT_TX_FAILED)
+		tcpm_pd_transmit_complete(chip->port, TCPC_TX_FAILED);
+
+	/* Reinit regs as Hard reset sets them to default value */
+	if ((status & TCPC_ALERT_TX_SUCCESS) && (status & TCPC_ALERT_TX_FAILED))
+		max_tcpci_init_regs(chip);
+}
+
+static irqreturn_t _max_tcpci_irq(struct max_tcpci_chip *chip, u16 status)
+{
+	u16 mask;
+	int ret;
+
+	/*
+	 * Clear alert status for everything except RX_STATUS, which shouldn't
+	 * be cleared until we have successfully retrieved message.
+	 */
+	if (status & ~TCPC_ALERT_RX_STATUS) {
+		mask = status & TCPC_ALERT_RX_BUF_OVF ?
+			status & ~(TCPC_ALERT_RX_STATUS | TCPC_ALERT_RX_BUF_OVF) :
+			status & ~TCPC_ALERT_RX_STATUS;
+		ret = max_tcpci_write16(chip, TCPC_ALERT, mask);
+		if (ret < 0) {
+			dev_err(chip->dev, "ALERT clear failed\n");
+			return ret;
+		}
+	}
+
+	if (status & TCPC_ALERT_RX_BUF_OVF && !(status & TCPC_ALERT_RX_STATUS)) {
+		ret = max_tcpci_write16(chip, TCPC_ALERT, (TCPC_ALERT_RX_STATUS |
+							  TCPC_ALERT_RX_BUF_OVF));
+		if (ret < 0) {
+			dev_err(chip->dev, "ALERT clear failed\n");
+			return ret;
+		}
+	}
+
+	if (status & TCPC_ALERT_RX_STATUS)
+		process_rx(chip, status);
+
+	if (status & TCPC_ALERT_TX_DISCARDED)
+		dev_info(chip->dev, "TX_DISCARDED");
+
+	if (status & TCPC_ALERT_VBUS_DISCNCT)
+		tcpm_vbus_change(chip->port);
+
+	if (status & TCPC_ALERT_CC_STATUS)
+		tcpm_cc_change(chip->port);
+
+	if (status & TCPC_ALERT_POWER_STATUS)
+		process_power_status(chip);
+
+	if (status & TCPC_ALERT_RX_HARD_RST) {
+		tcpm_pd_hard_reset(chip->port);
+		max_tcpci_init_regs(chip);
+	}
+
+	if (status & TCPC_ALERT_TX_SUCCESS || status & TCPC_ALERT_TX_DISCARDED || status &
+	    TCPC_ALERT_TX_FAILED)
+		process_tx(chip, status);
+
+	return IRQ_HANDLED;
+}
+
+static irqreturn_t max_tcpci_irq(int irq, void *dev_id)
+{
+	struct max_tcpci_chip *chip = dev_id;
+	u16 status;
+	irqreturn_t irq_return;
+	int ret;
+
+	if (!chip->port)
+		return IRQ_HANDLED;
+
+	ret = max_tcpci_read16(chip, TCPC_ALERT, &status);
+	if (ret < 0) {
+		dev_err(chip->dev, "ALERT read failed\n");
+		return ret;
+	}
+	while (status) {
+		irq_return = _max_tcpci_irq(chip, status);
+		/* Do not return if the ALERT is already set. */
+		ret = max_tcpci_read16(chip, TCPC_ALERT, &status);
+		if (ret < 0)
+			break;
+	}
+
+	return irq_return;
+}
+
+static irqreturn_t max_tcpci_isr(int irq, void *dev_id)
+{
+	struct max_tcpci_chip *chip = dev_id;
+
+	pm_wakeup_event(chip->dev, PD_ACTIVITY_TIMEOUT_MS);
+
+	if (!chip->port)
+		return IRQ_HANDLED;
+
+	return IRQ_WAKE_THREAD;
+}
+
+static int max_tcpci_init_alert(struct max_tcpci_chip *chip, struct i2c_client *client)
+{
+	int ret, irq_gpio;
+
+	irq_gpio = of_get_named_gpio(client->dev.of_node, "usbpd,usbpd_int", 0);
+	client->irq = gpio_to_irq(irq_gpio);
+	if (!client->irq)
+		return -ENODEV;
+
+	ret = devm_request_threaded_irq(chip->dev, client->irq, max_tcpci_isr, max_tcpci_irq,
+					(IRQF_TRIGGER_LOW | IRQF_ONESHOT), dev_name(chip->dev),
+					chip);
+
+	if (ret < 0)
+		return ret;
+
+	enable_irq_wake(client->irq);
+	return 0;
+}
+
+static int max_tcpci_start_toggling(struct tcpci *tcpci, struct tcpci_data *tdata,
+				    enum typec_cc_status cc)
+{
+	struct max_tcpci_chip *chip = tdata_to_max_tcpci(tdata);
+
+	max_tcpci_init_regs(chip);
+
+	return 0;
+}
+
+static int tcpci_init(struct tcpci *tcpci, struct tcpci_data *data)
+{
+	/*
+	 * Generic TCPCI overwrites the regs once this driver initializes
+	 * them. Prevent this by returning -1.
+	 */
+	return -1;
+}
+
+static int max_tcpci_probe(struct i2c_client *client, const struct i2c_device_id *i2c_id)
+{
+	int ret;
+	struct max_tcpci_chip *chip;
+	u8 power_status;
+
+	chip = devm_kzalloc(&client->dev, sizeof(*chip), GFP_KERNEL);
+	if (!chip)
+		return -ENOMEM;
+
+	chip->client = client;
+	chip->data.regmap = devm_regmap_init_i2c(client, &max_tcpci_regmap_config);
+	if (IS_ERR(chip->data.regmap)) {
+		dev_err(&client->dev, "Regmap init failed\n");
+		return PTR_ERR(chip->data.regmap);
+	}
+
+	chip->dev = &client->dev;
+	i2c_set_clientdata(client, chip);
+
+	ret = max_tcpci_read8(chip, TCPC_POWER_STATUS, &power_status);
+	if (ret < 0)
+		return ret;
+
+	if (power_status & TCPC_POWER_STATUS_UNINIT) {
+		dev_err(&client->dev, "TCPC not ready!");
+		return -EPROBE_DEFER;
+	}
+
+	/* Chip level tcpci callbacks */
+	chip->data.set_vbus = max_tcpci_set_vbus;
+	chip->data.start_drp_toggling = max_tcpci_start_toggling;
+	chip->data.TX_BUF_BYTE_x_hidden = true;
+	chip->data.init = tcpci_init;
+
+	max_tcpci_init_regs(chip);
+	chip->tcpci = tcpci_register_port(chip->dev, &chip->data);
+	if (IS_ERR_OR_NULL(chip->tcpci)) {
+		dev_err(&client->dev, "TCPCI port registration failed");
+		ret = PTR_ERR(chip->tcpci);
+		return PTR_ERR(chip->tcpci);
+	}
+	chip->port = tcpci_get_tcpm_port(chip->tcpci);
+	ret = max_tcpci_init_alert(chip, client);
+	if (ret < 0)
+		goto unreg_port;
+
+	device_init_wakeup(chip->dev, true);
+	return 0;
+
+unreg_port:
+	tcpci_unregister_port(chip->tcpci);
+
+	return ret;
+}
+
+static int max_tcpci_remove(struct i2c_client *client)
+{
+	struct max_tcpci_chip *chip = i2c_get_clientdata(client);
+
+	if (!IS_ERR_OR_NULL(chip->tcpci))
+		tcpci_unregister_port(chip->tcpci);
+
+	return 0;
+}
+
+static const struct i2c_device_id max_tcpci_id[] = {
+	{ "maxtcpc", 0 },
+	{ }
+};
+MODULE_DEVICE_TABLE(i2c, max_tcpci_id);
+
+#ifdef CONFIG_OF
+static const struct of_device_id max_tcpci_of_match[] = {
+	{ .compatible = "maxim,tcpc", },
+	{},
+};
+MODULE_DEVICE_TABLE(of, max_tcpci_of_match);
+#endif
+
+static struct i2c_driver max_tcpci_i2c_driver = {
+	.driver = {
+		.name = "maxtcpc",
+		.of_match_table = of_match_ptr(max_tcpci_of_match),
+	},
+	.probe = max_tcpci_probe,
+	.remove = max_tcpci_remove,
+	.id_table = max_tcpci_id,
+};
+module_i2c_driver(max_tcpci_i2c_driver);
+
+MODULE_AUTHOR("Badhri Jagan Sridharan <badhri@google.com>");
+MODULE_DESCRIPTION("Maxim TCPCI based USB Type-C Port Controller Interface Driver");
+MODULE_LICENSE("GPL v2");
-- 
2.28.0.402.g5ffc5be6b7-goog


  parent reply	other threads:[~2020-09-01  3:00 UTC|newest]

Thread overview: 32+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-09-01  2:59 [PATCH v6 00/14] TCPM support for FRS and AutoDischarge Disconnect Badhri Jagan Sridharan
2020-09-01  2:59 ` [PATCH v6 01/14] usb: typec: tcpci: Add register definitions to tcpci Badhri Jagan Sridharan
2020-09-15 12:10   ` Heikki Krogerus
2020-09-01  2:59 ` [PATCH v6 02/14] usb: typec: tcpci: Add support when hidden tx registers are inaccessible Badhri Jagan Sridharan
2020-09-15 12:11   ` Heikki Krogerus
2020-09-01  2:59 ` [PATCH v6 03/14] usb: typec: tcpci: update ROLE_CONTROL for DRP Badhri Jagan Sridharan
2020-09-15 12:12   ` Heikki Krogerus
2020-09-01  2:59 ` [PATCH v6 04/14] usb: typec: tcpci: Add a getter method to retrieve tcpm_port reference Badhri Jagan Sridharan
2020-09-15 12:16   ` Heikki Krogerus
2020-09-01  2:59 ` [PATCH v6 05/14] usb: typec: tcpci: Add set_vbus tcpci callback Badhri Jagan Sridharan
2020-09-15 12:22   ` Heikki Krogerus
2020-09-16  9:07     ` Badhri Jagan Sridharan
2020-09-01  2:59 ` [PATCH v6 06/14] dt-bindings: usb: Maxim type-c controller device tree binding document Badhri Jagan Sridharan
2020-09-01  2:59 ` Badhri Jagan Sridharan [this message]
2020-09-15 12:43   ` [PATCH v6 07/14] usb: typec: tcpci_maxim: Chip level TCPC driver Heikki Krogerus
2020-09-16  9:34     ` Badhri Jagan Sridharan
2020-09-01  2:59 ` [PATCH v6 08/14] dt-bindings: connector: Add property to set initial current cap for FRS Badhri Jagan Sridharan
2020-09-01  2:59 ` [PATCH v6 09/14] usb: typec: tcpm: Add support for Sink Fast Role SWAP(FRS) Badhri Jagan Sridharan
2020-09-15 13:20   ` Heikki Krogerus
2020-09-17 10:23     ` Badhri Jagan Sridharan
2020-09-01  2:59 ` [PATCH v6 10/14] usb: typec: tcpci: Implement callbacks for FRS Badhri Jagan Sridharan
2020-09-15 13:23   ` Heikki Krogerus
2020-09-01  2:59 ` [PATCH v6 11/14] usb: typec: tcpci_maxim: Add support for Sink FRS Badhri Jagan Sridharan
2020-09-15 13:25   ` Heikki Krogerus
2020-09-01  2:59 ` [PATCH v6 12/14] usb: typec: tcpm: Implement enabling Auto Discharge disconnect support Badhri Jagan Sridharan
2020-09-01  2:59 ` [PATCH v6 13/14] usb: typec: tcpci: Implement Auto discharge disconnect callbacks Badhri Jagan Sridharan
2020-09-01  2:59 ` [PATCH v6 14/14] usb: typec: tcpci_maxim: Implemnent set_auto_vbus_discharge_threshold Badhri Jagan Sridharan
2020-09-15 12:09 ` [PATCH v6 00/14] TCPM support for FRS and AutoDischarge Disconnect Heikki Krogerus
2020-09-15 16:57   ` Badhri Jagan Sridharan
2020-09-15 13:33 ` Heikki Krogerus
2020-09-15 16:59   ` Badhri Jagan Sridharan
2020-09-16 11:05 ` Greg Kroah-Hartman

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20200901025927.3596190-8-badhri@google.com \
    --to=badhri@google.com \
    --cc=gregkh@linuxfoundation.org \
    --cc=heikki.krogerus@linux.intel.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-usb@vger.kernel.org \
    --cc=linux@roeck-us.net \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.