From mboxrd@z Thu Jan 1 00:00:00 1970 From: Simon Glass Date: Tue, 1 Sep 2020 05:14:03 -0600 Subject: [PATCH v3 10/12] binman: Allow selecting default FIT configuration In-Reply-To: <20200901111405.358391-1-sjg@chromium.org> References: <20200901111405.358391-1-sjg@chromium.org> Message-ID: <20200901051400.v3.10.Ie75709c8b68c270e911bba4dbd521706c966087f@changeid> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de Add a new entry argument to the fit entry which allows selection of the default configuration to use. This is the 'default' property in the 'configurations' node. Update the Makefile to pass in the value of DEVICE_TREE or CONFIG_DEFAULT_DEVICE_TREE to provide this information. Signed-off-by: Simon Glass Suggested-by: Michal Simek --- Changes in v3: - Rebase on top of earlier binman series Changes in v2: - Add new patch to allow selecting default FIT configuration Makefile | 2 + tools/binman/README.entries | 4 ++ tools/binman/etype/fit.py | 22 ++++++++++ tools/binman/ftest.py | 41 +++++++++++++++++-- .../test/{170_fit_fdt.dts => 172_fit_fdt.dts} | 2 +- 5 files changed, 67 insertions(+), 4 deletions(-) rename tools/binman/test/{170_fit_fdt.dts => 172_fit_fdt.dts} (95%) diff --git a/Makefile b/Makefile index 65024c74089..fcc559ce7fa 100644 --- a/Makefile +++ b/Makefile @@ -1321,6 +1321,7 @@ u-boot.ldr: u-boot # binman # --------------------------------------------------------------------------- # Use 'make BINMAN_DEBUG=1' to enable debugging +default_dt := $(if $(DEVICE_TREE),$(DEVICE_TREE),$(CONFIG_DEFAULT_DEVICE_TREE)) quiet_cmd_binman = BINMAN $@ cmd_binman = $(srctree)/tools/binman/binman $(if $(BINMAN_DEBUG),-D) \ --toolpath $(objtree)/tools \ @@ -1329,6 +1330,7 @@ cmd_binman = $(srctree)/tools/binman/binman $(if $(BINMAN_DEBUG),-D) \ -I . -I $(srctree) -I $(srctree)/board/$(BOARDDIR) \ -I arch/$(ARCH)/dts -a of-list=$(CONFIG_OF_LIST) \ -a atf-bl31-path=${BL31} \ + -a default-dt=$(default_dt) \ $(BINMAN_$(@F)) OBJCOPYFLAGS_u-boot.ldr.hex := -I binary -O ihex diff --git a/tools/binman/README.entries b/tools/binman/README.entries index d2628dffd5d..c1d436563e8 100644 --- a/tools/binman/README.entries +++ b/tools/binman/README.entries @@ -402,6 +402,10 @@ Available substitutions for '@' nodes are: Note that if no devicetree files are provided (with '-a of-list' as above) then no nodes will be generated. +The 'default' property, if present, will be automatically set to the name +if of configuration whose devicetree matches the 'default-dt' entry +argument, e.g. with '-a default-dt=sun50i-a64-pine64-lts'. + Properties (in the 'fit' node itself): fit,external-offset: Indicates that the contents of the FIT are external diff --git a/tools/binman/etype/fit.py b/tools/binman/etype/fit.py index c291eb26bad..bf73bfb9a56 100644 --- a/tools/binman/etype/fit.py +++ b/tools/binman/etype/fit.py @@ -90,6 +90,10 @@ class Entry_fit(Entry): Note that if no devicetree files are provided (with '-a of-list' as above) then no nodes will be generated. + The 'default' property, if present, will be automatically set to the name + if of configuration whose devicetree matches the 'default-dt' entry + argument, e.g. with '-a default-dt=sun50i-a64-pine64-lts'. + Properties (in the 'fit' node itself): fit,external-offset: Indicates that the contents of the FIT are external @@ -121,6 +125,8 @@ class Entry_fit(Entry): [EntryArg(self._fit_list_prop.value, str)]) if fdts is not None: self._fdts = fdts.split() + self._fit_default_dt = self.GetEntryArgsOrProps([EntryArg('default-dt', + str)])[0] def ReadNode(self): self._ReadSubnodes() @@ -142,6 +148,22 @@ class Entry_fit(Entry): """ for pname, prop in node.props.items(): if not pname.startswith('fit,'): + if pname == 'default': + val = prop.value + # Handle the 'default' property + if val.startswith('@'): + if not self._fdts: + continue + if not self._fit_default_dt: + self.Raise("Generated 'default' node requires default-dt entry argument") + if self._fit_default_dt not in self._fdts: + self.Raise("default-dt entry argument '%s' not found in fdt list: %s" % + (self._fit_default_dt, + ', '.join(self._fdts))) + seq = self._fdts.index(self._fit_default_dt) + val = val[1:].replace('DEFAULT-SEQ', str(seq + 1)) + fsw.property_string(pname, val) + continue fsw.property(pname, prop.bytes) rel_path = node.path[len(base_node.path):] diff --git a/tools/binman/ftest.py b/tools/binman/ftest.py index 78d0e9c2b93..a269a7497cb 100644 --- a/tools/binman/ftest.py +++ b/tools/binman/ftest.py @@ -3602,7 +3602,7 @@ class TestFunctional(unittest.TestCase): """ cnode = dtb.GetNode('/configurations') self.assertIn('default', cnode.props) - self.assertEqual('config-1', cnode.props['default'].value) + self.assertEqual('config-2', cnode.props['default'].value) name = 'config-%d' % seq fnode = dtb.GetNode('/configurations/%s' % name) @@ -3615,9 +3615,10 @@ class TestFunctional(unittest.TestCase): entry_args = { 'of-list': 'test-fdt1 test-fdt2', + 'default-dt': 'test-fdt2', } data = self._DoReadFileDtb( - '170_fit_fdt.dts', + '172_fit_fdt.dts', entry_args=entry_args, extra_indirs=[os.path.join(self._indir, TEST_FDT_SUBDIR)])[0] self.assertEqual(U_BOOT_NODTB_DATA, data[-len(U_BOOT_NODTB_DATA):]) @@ -3639,7 +3640,7 @@ class TestFunctional(unittest.TestCase): def testFitFdtMissingList(self): """Test handling of a missing 'of-list' entry arg""" with self.assertRaises(ValueError) as e: - self._DoReadFile('170_fit_fdt.dts') + self._DoReadFile('172_fit_fdt.dts') self.assertIn("Generator node requires 'of-list' entry argument", str(e.exception)) @@ -3657,5 +3658,39 @@ class TestFunctional(unittest.TestCase): self.assertIn("Generator node requires 'fit,fdt-list' property", str(e.exception)) + def testFitFdtEmptyList(self): + """Test handling of an empty 'of-list' entry arg""" + entry_args = { + 'of-list': '', + } + data = self._DoReadFileDtb('172_fit_fdt.dts', entry_args=entry_args)[0] + + def testFitFdtMissing(self): + """Test handling of a missing 'default-dt' entry arg""" + entry_args = { + 'of-list': 'test-fdt1 test-fdt2', + } + with self.assertRaises(ValueError) as e: + self._DoReadFileDtb( + '172_fit_fdt.dts', + entry_args=entry_args, + extra_indirs=[os.path.join(self._indir, TEST_FDT_SUBDIR)])[0] + self.assertIn("Generated 'default' node requires default-dt entry argument", + str(e.exception)) + + def testFitFdtNotInList(self): + """Test handling of a default-dt that is not in the of-list""" + entry_args = { + 'of-list': 'test-fdt1 test-fdt2', + 'default-dt': 'test-fdt3', + } + with self.assertRaises(ValueError) as e: + self._DoReadFileDtb( + '172_fit_fdt.dts', + entry_args=entry_args, + extra_indirs=[os.path.join(self._indir, TEST_FDT_SUBDIR)])[0] + self.assertIn("default-dt entry argument 'test-fdt3' not found in fdt list: test-fdt1, test-fdt2", + str(e.exception)) + if __name__ == "__main__": unittest.main() diff --git a/tools/binman/test/170_fit_fdt.dts b/tools/binman/test/172_fit_fdt.dts similarity index 95% rename from tools/binman/test/170_fit_fdt.dts rename to tools/binman/test/172_fit_fdt.dts index 89142e91017..99d710c57e9 100644 --- a/tools/binman/test/170_fit_fdt.dts +++ b/tools/binman/test/172_fit_fdt.dts @@ -40,7 +40,7 @@ }; configurations { - default = "config-1"; + default = "@config-DEFAULT-SEQ"; @config-SEQ { description = "conf-NAME.dtb"; firmware = "uboot"; -- 2.28.0.402.g5ffc5be6b7-goog