From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: X-Spam-Checker-Version: SpamAssassin 3.4.0 (2014-02-07) on aws-us-west-2-korg-lkml-1.web.codeaurora.org X-Spam-Level: X-Spam-Status: No, score=-7.1 required=3.0 tests=BAYES_00,DKIMWL_WL_HIGH, DKIM_SIGNED,DKIM_VALID,DKIM_VALID_AU,HEADER_FROM_DIFFERENT_DOMAINS, MAILING_LIST_MULTI,SPF_HELO_NONE,SPF_PASS,URIBL_BLOCKED,USER_AGENT_GIT autolearn=no autolearn_force=no version=3.4.0 Received: from mail.kernel.org (mail.kernel.org [198.145.29.99]) by smtp.lore.kernel.org (Postfix) with ESMTP id 38B8AC2BBD0 for ; Wed, 2 Sep 2020 23:02:27 +0000 (UTC) Received: from vger.kernel.org (vger.kernel.org [23.128.96.18]) by mail.kernel.org (Postfix) with ESMTP id EAA1020773 for ; Wed, 2 Sep 2020 23:02:26 +0000 (UTC) Authentication-Results: mail.kernel.org; dkim=pass (1024-bit key) header.d=chromium.org header.i=@chromium.org header.b="R4vNk55f" Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1726312AbgIBXCZ (ORCPT ); Wed, 2 Sep 2020 19:02:25 -0400 Received: from lindbergh.monkeyblade.net ([23.128.96.19]:35018 "EHLO lindbergh.monkeyblade.net" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1726586AbgIBXCT (ORCPT ); Wed, 2 Sep 2020 19:02:19 -0400 Received: from mail-pj1-x1041.google.com (mail-pj1-x1041.google.com [IPv6:2607:f8b0:4864:20::1041]) by lindbergh.monkeyblade.net (Postfix) with ESMTPS id DA656C061245 for ; Wed, 2 Sep 2020 16:02:18 -0700 (PDT) Received: by mail-pj1-x1041.google.com with SMTP id g6so510374pjl.0 for ; Wed, 02 Sep 2020 16:02:18 -0700 (PDT) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=chromium.org; s=google; h=from:to:cc:subject:date:message-id:mime-version :content-transfer-encoding; bh=e+1dvfu4EOoaT+OYG8qPaGIwcmqa7B22edwe51plKCw=; b=R4vNk55fdixmHoXOpUqynLJ582LTFT/Bi8L7UMkxab1IErhkyBWXi+TEtLwWPvHxBk cnGy8hw8dpgpEaMQfIKWkSEvilX4X4CBI8Lt5pKQdY++/zgkzvL0mJ7NnSCHofKzTyBr sNO32L5PO5uqFOy+mKSLajBBkvxNObgSNFwHo= X-Google-DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=1e100.net; s=20161025; h=x-gm-message-state:from:to:cc:subject:date:message-id:mime-version :content-transfer-encoding; bh=e+1dvfu4EOoaT+OYG8qPaGIwcmqa7B22edwe51plKCw=; b=tB7lYTJZ0dQwTcqEMI4G+EiAxr/1s89EUePB4dHHffLpm0gGsQCX+LaPkXGJ1X5eOG omdM4QESULFpZ4HpThbfu3do9yAHRMSk2/KKoe0Iu59+IeMKn8j8BoWGktbnKZU53lQg UqVHQHopzHTPImIPLgkyp6KZFPzNKE++IubdaZldotcF0g96cy5zzuP+0ZHEZbH44Mvi daSsK+N8SU3oodi/aFnBu/JLRs2SeprJ8EDuVmW1I4lbrdtSFwxDOzl6LC1+d4DWAiDZ SRLWaxUbXbTI6uHCtaFg3FxTnaSa3mUXT8j4373gQ2bF8FYUPl/m7ZOej26zfU3e3Iuv Tpbw== X-Gm-Message-State: AOAM533MYWowG1pUsEuHdoOV9zg4WRSz3SEXdYVd7jDq3RfPQ4/hU9ZE Rq5jLnJJFLOVyPt/jjiLK7L2Xg== X-Google-Smtp-Source: ABdhPJwEvkuaDLlxOry54Sz2TTdt3EAg4sbPT69IFPSIphz7L8XoncwKCkrqqgc6PABIc9+A3pHtoA== X-Received: by 2002:a17:90b:384c:: with SMTP id nl12mr20912pjb.205.1599087738087; Wed, 02 Sep 2020 16:02:18 -0700 (PDT) Received: from smtp.gmail.com ([2620:15c:202:1:3e52:82ff:fe6c:83ab]) by smtp.gmail.com with ESMTPSA id x12sm410277pjq.43.2020.09.02.16.02.16 (version=TLS1_3 cipher=TLS_AES_256_GCM_SHA384 bits=256/256); Wed, 02 Sep 2020 16:02:17 -0700 (PDT) From: Stephen Boyd To: Kishon Vijay Abraham I , Vinod Koul Cc: linux-kernel@vger.kernel.org, linux-arm-msm@vger.kernel.org, Jeykumar Sankaran , Chandan Uddaraju , Vara Reddy , Tanmay Shah , Bjorn Andersson , Manu Gautam , Sandeep Maheswaram , Douglas Anderson , Sean Paul , Rob Clark , Jonathan Marek , Dmitry Baryshkov , devicetree@vger.kernel.org, Rob Herring , Stephen Boyd Subject: [PATCH v2 00/10] Support qcom USB3+DP combo phy (or type-c phy) Date: Wed, 2 Sep 2020 16:02:05 -0700 Message-Id: <20200902230215.3452712-1-swboyd@chromium.org> X-Mailer: git-send-email 2.28.0.402.g5ffc5be6b7-goog MIME-Version: 1.0 Content-Transfer-Encoding: 8bit Sender: linux-arm-msm-owner@vger.kernel.org Precedence: bulk List-ID: X-Mailing-List: linux-arm-msm@vger.kernel.org This patch series is based on v12 of the msm DP driver submission[1] plus a compliance patch[2]. In the v5 patch series review I suggested that the DP PHY and PLL be split out of the drm driver and moved to the qmp phy driver. This patch series does that, but it is still marked as an RFC because there are a couple more things to do, mostly updating the DT binding and getting agreement on how to structure the code. Eventually I believe the qmp phy driver will need to listen for type-c notifiers or somehow know the type-c pinout being used so this driver can program things slightly differently. Right now, I don't have any way to test it though, so I've left it as future work. For some more details, the DP phy and the USB3 phy share the same physical pins on the SoC and those pins pretty much line up with a type-c pinout modulo some CC pins for cable orientation detection logic that lives on the PMIC. So the DP phy can use all four lanes or it can use two lanes and the USB3 phy can use two lanes. In the hardware designs that I have access to it is always two lanes for USB3 and two lanes for DP going through what looks like a type-c pinout so this just hard codes that configuration in the driver. Here's the example node that I'm using on sc7180: usb_1_qmpphy: phy-wrapper@88e9000 { compatible = "qcom,sc7180-qmp-usb3-dp-phy"; reg = <0 0x088e9000 0 0x18c>, // usb pll (or serdes) <0 0x088e8000 0 0x38>, // dp com <0 0x088ea000 0 0x40>; // dp pll (or serdes) status = "disabled"; #address-cells = <2>; #size-cells = <2>; ranges; clocks = <&gcc GCC_USB3_PRIM_PHY_AUX_CLK>, <&gcc GCC_USB_PHY_CFG_AHB2PHY_CLK>, <&gcc GCC_USB3_PRIM_CLKREF_CLK>, <&gcc GCC_USB3_PRIM_PHY_COM_AUX_CLK>; clock-names = "aux", "cfg_ahb", "ref", "com_aux"; resets = <&gcc GCC_USB3_PHY_PRIM_BCR>, <&gcc GCC_USB3_DP_PHY_PRIM_BCR>; reset-names = "phy", "common"; usb_1_ssphy: usb3-phy@88e9200 { reg = <0 0x088e9200 0 0x128>, // tx0 <0 0x088e9400 0 0x200>, // rx0 <0 0x088e9c00 0 0x218>, // pcs <0 0x088e9600 0 0x128>, // tx1 <0 0x088e9800 0 0x200>, // rx1 <0 0x088e9a00 0 0x18>; // pcs misc #clock-cells = <0>; #phy-cells = <0>; clocks = <&gcc GCC_USB3_PRIM_PHY_PIPE_CLK>; clock-names = "pipe0"; clock-output-names = "usb3_phy_pipe_clk_src"; }; dp_phy: dp-phy@88ea200 { reg = <0 0x088ea200 0 0x200>, // tx0 <0 0x088ea400 0 0x200>, // rx0 <0 0x088eaa00 0 0x200>, // dp phy <0 0x088ea600 0 0x200>, // tx1 <0 0x088ea800 0 0x200>; // rx1 #clock-cells = <1>; #phy-cells = <0>; }; }; I had to put the serdes register region in the wrapper node and jam the common area (dp_com) in the middle. Sort of a mess but it was the best I could do to make the driver changes minimially invasive. I also had to change the node names to 'usb3-phy' and 'dp-phy' from 'phy' so that I could differentiate the different phys in the driver. Otherwise the qmp driver was already mostly prepared for two different phys to sit next to each other inside the phy wrapper so it was mostly just a chore of moving code from one place to another. The last patch in this series rips out the DP PHY and PLL code from the drm driver and wires in the phy API calls instead. I don't know the merge path for it. Maybe Rob Clark can pick it up and I can pick the clk patch into clk-next and the phy patches can go via the phy tree, then everything can meet in linux-next. There are still some more TODOs in the code but they feel minor enough to fix with more testing. Changes from v1 (https://lore.kernel.org/r/20200826024711.220080-1-swboyd@chromium.org) * New patch for devm_platform_ioremap_resource() * Moved serdes tables to sc7180 patch * Removed more dead code from drm driver in last patch * Reset aux phy is kept around now. Slightly moved where we init the phy and setup aux * Added a phy_exit() call to last patch so we properly shut down DP on disconnect and can work on multiple plugs Changes from RFC (https://lore.kernel.org/r/20200611091919.108018-1-swboyd@chromium.org) * New patch for DT binding * Rebased onto latest DP patch series TODO: * Clean up phy power on sequence a bit so that it is done in one place instead of two * Allow link rate to change after phy is powered on? * Make the runtime PM logic detect combo phy and power down both? Stephen Boyd (10): dt-bindings: phy: qcom,qmp-usb3-dp: Add DP phy information phy: qcom-qmp: Move phy mode into struct qmp_phy phy: qcom-qmp: Remove 'initialized' in favor of 'init_count' phy: qcom-qmp: Move 'serdes' and 'cfg' into 'struct qcom_phy' phy: qcom-qmp: Get dp_com I/O resource by index phy: qcom-qmp: Use devm_platform_ioremap_resource() to simplify phy: qcom-qmp: Add support for DP in USB3+DP combo phy phy: qcom-qmp: Add support for sc7180 DP phy clk: qcom: dispcc: Update DP clk ops for phy design drm/msm/dp: Use qmp phy for DP PLL and PHY .../bindings/phy/qcom,qmp-usb3-dp-phy.yaml | 91 +- drivers/clk/qcom/clk-rcg2.c | 19 +- drivers/clk/qcom/dispcc-sc7180.c | 3 - drivers/gpu/drm/msm/Makefile | 4 +- drivers/gpu/drm/msm/dp/dp_aux.c | 7 +- drivers/gpu/drm/msm/dp/dp_catalog.c | 287 +---- drivers/gpu/drm/msm/dp/dp_catalog.h | 9 +- drivers/gpu/drm/msm/dp/dp_ctrl.c | 48 +- drivers/gpu/drm/msm/dp/dp_display.c | 17 - drivers/gpu/drm/msm/dp/dp_display.h | 3 - drivers/gpu/drm/msm/dp/dp_link.c | 2 + drivers/gpu/drm/msm/dp/dp_panel.c | 1 + drivers/gpu/drm/msm/dp/dp_parser.c | 12 +- drivers/gpu/drm/msm/dp/dp_parser.h | 12 +- drivers/gpu/drm/msm/dp/dp_pll.c | 99 -- drivers/gpu/drm/msm/dp/dp_pll.h | 61 - drivers/gpu/drm/msm/dp/dp_pll_10nm.c | 930 --------------- drivers/gpu/drm/msm/dp/dp_pll_private.h | 89 -- drivers/gpu/drm/msm/dp/dp_power.c | 39 +- drivers/gpu/drm/msm/dp/dp_power.h | 9 - drivers/gpu/drm/msm/dp/dp_reg.h | 213 ---- drivers/phy/qualcomm/phy-qcom-qmp.c | 1057 ++++++++++++++--- drivers/phy/qualcomm/phy-qcom-qmp.h | 80 ++ 23 files changed, 1140 insertions(+), 1952 deletions(-) delete mode 100644 drivers/gpu/drm/msm/dp/dp_pll.c delete mode 100644 drivers/gpu/drm/msm/dp/dp_pll.h delete mode 100644 drivers/gpu/drm/msm/dp/dp_pll_10nm.c delete mode 100644 drivers/gpu/drm/msm/dp/dp_pll_private.h Cc: Jeykumar Sankaran Cc: Chandan Uddaraju Cc: Vara Reddy Cc: Tanmay Shah Cc: Bjorn Andersson Cc: Manu Gautam Cc: Sandeep Maheswaram Cc: Douglas Anderson Cc: Sean Paul Cc: Rob Clark Cc: Jonathan Marek Cc: Dmitry Baryshkov Cc: Cc: Rob Herring Cc: Stephen Boyd [1] https://lore.kernel.org/r/20200827211658.27479-1-tanmay@codeaurora.org [2] https://lore.kernel.org/r/20200827214739.22037-1-khsieh@codeaurora.org base-commit: d012a7190fc1fd72ed48911e77ca97ba4521bccd prerequisite-patch-id: aa650e8353e003be0075deea0dee92a82e321432 prerequisite-patch-id: 496af774194db20706fa82eb79f95891c8784952 prerequisite-patch-id: 87e6b1a10063ca350cacd64408024714599a14f4 prerequisite-patch-id: ac467cb99ea60ee186ab9bbe47a3e4d9c13a1313 prerequisite-patch-id: 4eff0531912abbfa748181e90baffba9eb52e295 prerequisite-patch-id: a6970d668b3570f2c10eda99904aa3dfc8fefa1d -- Sent by a computer, using git, on the internet