All of lore.kernel.org
 help / color / mirror / Atom feed
From: David Awogbemila <awogbemila@google.com>
To: netdev@vger.kernel.org
Cc: Catherine Sullivan <csully@google.com>,
	Yangchun Fu <yangchun@google.com>,
	David Awogbemila <awogbemila@google.com>
Subject: [PATCH net-next v4 3/8] gve: Use dev_info/err instead of netif_info/err.
Date: Fri, 11 Sep 2020 10:38:46 -0700	[thread overview]
Message-ID: <20200911173851.2149095-4-awogbemila@google.com> (raw)
In-Reply-To: <20200911173851.2149095-1-awogbemila@google.com>

From: Catherine Sullivan <csully@google.com>

Update the driver to use dev_info/err instead of netif_info/err.

Reviewed-by: Yangchun Fu <yangchun@google.com>
Signed-off-by: Catherine Sullivan <csully@google.com>
Signed-off-by: David Awogbemila <awogbemila@google.com>
---
 drivers/net/ethernet/google/gve/gve_adminq.c | 15 ++++++---------
 drivers/net/ethernet/google/gve/gve_main.c   | 10 +++++-----
 2 files changed, 11 insertions(+), 14 deletions(-)

diff --git a/drivers/net/ethernet/google/gve/gve_adminq.c b/drivers/net/ethernet/google/gve/gve_adminq.c
index 529de756ff9b..d9aed217c1d6 100644
--- a/drivers/net/ethernet/google/gve/gve_adminq.c
+++ b/drivers/net/ethernet/google/gve/gve_adminq.c
@@ -334,8 +334,7 @@ int gve_adminq_describe_device(struct gve_priv *priv)
 
 	priv->tx_desc_cnt = be16_to_cpu(descriptor->tx_queue_entries);
 	if (priv->tx_desc_cnt * sizeof(priv->tx->desc[0]) < PAGE_SIZE) {
-		netif_err(priv, drv, priv->dev, "Tx desc count %d too low\n",
-			  priv->tx_desc_cnt);
+		dev_err(&priv->pdev->dev, "Tx desc count %d too low\n", priv->tx_desc_cnt);
 		err = -EINVAL;
 		goto free_device_descriptor;
 	}
@@ -344,8 +343,7 @@ int gve_adminq_describe_device(struct gve_priv *priv)
 	    < PAGE_SIZE ||
 	    priv->rx_desc_cnt * sizeof(priv->rx->data.data_ring[0])
 	    < PAGE_SIZE) {
-		netif_err(priv, drv, priv->dev, "Rx desc count %d too low\n",
-			  priv->rx_desc_cnt);
+		dev_err(&priv->pdev->dev, "Rx desc count %d too low\n", priv->rx_desc_cnt);
 		err = -EINVAL;
 		goto free_device_descriptor;
 	}
@@ -353,8 +351,7 @@ int gve_adminq_describe_device(struct gve_priv *priv)
 				be64_to_cpu(descriptor->max_registered_pages);
 	mtu = be16_to_cpu(descriptor->mtu);
 	if (mtu < ETH_MIN_MTU) {
-		netif_err(priv, drv, priv->dev, "MTU %d below minimum MTU\n",
-			  mtu);
+		dev_err(&priv->pdev->dev, "MTU %d below minimum MTU\n", mtu);
 		err = -EINVAL;
 		goto free_device_descriptor;
 	}
@@ -362,12 +359,12 @@ int gve_adminq_describe_device(struct gve_priv *priv)
 	priv->num_event_counters = be16_to_cpu(descriptor->counters);
 	ether_addr_copy(priv->dev->dev_addr, descriptor->mac);
 	mac = descriptor->mac;
-	netif_info(priv, drv, priv->dev, "MAC addr: %pM\n", mac);
+	dev_info(&priv->pdev->dev, "MAC addr: %pM\n", mac);
 	priv->tx_pages_per_qpl = be16_to_cpu(descriptor->tx_pages_per_qpl);
 	priv->rx_pages_per_qpl = be16_to_cpu(descriptor->rx_pages_per_qpl);
 	if (priv->rx_pages_per_qpl < priv->rx_desc_cnt) {
-		netif_err(priv, drv, priv->dev, "rx_pages_per_qpl cannot be smaller than rx_desc_cnt, setting rx_desc_cnt down to %d.\n",
-			  priv->rx_pages_per_qpl);
+		dev_err(&priv->pdev->dev, "rx_pages_per_qpl cannot be smaller than rx_desc_cnt, setting rx_desc_cnt down to %d.\n",
+			priv->rx_pages_per_qpl);
 		priv->rx_desc_cnt = priv->rx_pages_per_qpl;
 	}
 	priv->default_num_queues = be16_to_cpu(descriptor->default_num_queues);
diff --git a/drivers/net/ethernet/google/gve/gve_main.c b/drivers/net/ethernet/google/gve/gve_main.c
index 4f6c1fc9c58d..0fc68f844edf 100644
--- a/drivers/net/ethernet/google/gve/gve_main.c
+++ b/drivers/net/ethernet/google/gve/gve_main.c
@@ -930,7 +930,7 @@ static int gve_init_priv(struct gve_priv *priv, bool skip_describe_device)
 		priv->dev->max_mtu = PAGE_SIZE;
 		err = gve_adminq_set_mtu(priv, priv->dev->mtu);
 		if (err) {
-			netif_err(priv, drv, priv->dev, "Could not set mtu");
+			dev_err(&priv->pdev->dev, "Could not set mtu");
 			goto err;
 		}
 	}
@@ -970,10 +970,10 @@ static int gve_init_priv(struct gve_priv *priv, bool skip_describe_device)
 						priv->rx_cfg.num_queues);
 	}
 
-	netif_info(priv, drv, priv->dev, "TX queues %d, RX queues %d\n",
-		   priv->tx_cfg.num_queues, priv->rx_cfg.num_queues);
-	netif_info(priv, drv, priv->dev, "Max TX queues %d, Max RX queues %d\n",
-		   priv->tx_cfg.max_queues, priv->rx_cfg.max_queues);
+	dev_info(&priv->pdev->dev, "TX queues %d, RX queues %d\n",
+		 priv->tx_cfg.num_queues, priv->rx_cfg.num_queues);
+	dev_info(&priv->pdev->dev, "Max TX queues %d, Max RX queues %d\n",
+		 priv->tx_cfg.max_queues, priv->rx_cfg.max_queues);
 
 setup_device:
 	err = gve_setup_device_resources(priv);
-- 
2.28.0.618.gf4bc123cb7-goog


  parent reply	other threads:[~2020-09-11 17:39 UTC|newest]

Thread overview: 11+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-09-11 17:38 [PATCH net-next v4 0/8] Add GVE Features David Awogbemila
2020-09-11 17:38 ` [PATCH net-next v4 1/8] gve: Get and set Rx copybreak via ethtool David Awogbemila
2020-09-11 17:38 ` [PATCH net-next v4 2/8] gve: Add stats for gve David Awogbemila
2020-09-11 17:38 ` David Awogbemila [this message]
2020-09-11 17:38 ` [PATCH net-next v4 4/8] gve: Add Gvnic stats AQ command and ethtool show/set-priv-flags David Awogbemila
2020-09-11 17:38 ` [PATCH net-next v4 5/8] gve: NIC stats for report-stats and for ethtool David Awogbemila
2020-09-11 17:38 ` [PATCH net-next v4 6/8] gve: Batch AQ commands for creating and destroying queues David Awogbemila
2020-09-11 17:38 ` [PATCH net-next v4 7/8] gve: Use link status register to report link status David Awogbemila
2020-09-11 17:38 ` [PATCH net-next v4 8/8] gve: Enable Link Speed Reporting in the driver David Awogbemila
2020-09-11 20:55 ` [PATCH net-next v4 0/8] Add GVE Features Jakub Kicinski
2020-09-11 21:32   ` David Miller

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20200911173851.2149095-4-awogbemila@google.com \
    --to=awogbemila@google.com \
    --cc=csully@google.com \
    --cc=netdev@vger.kernel.org \
    --cc=yangchun@google.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.