From mboxrd@z Thu Jan 1 00:00:00 1970 From: Sean Anderson Date: Sat, 12 Sep 2020 20:28:17 -0400 Subject: [PATCH 0/4] dm: Print device name in dev_xxx() like Linux Message-ID: <20200913002821.404022-1-seanga2@gmail.com> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de This series adds some additional information to dev_dbg. With this series, and the following options applied in addition to sandbox_defconfig CONFIG_LOGLEVEL=8 CONFIG_LOG=n CONFIG_CMD_LOG=n CONFIG_CMD_TPM=n the output of U-Boot is U-Boot 2020.10-rc4-00006-g19b641dddd-dirty (Sep 12 2020 - 18:15:00 -0400) Model: sandbox DRAM: 128 MiB pinctrl-gpio sandbox_pinctrl_gpio: set_state_simple op missing leds gpio_led: set_state_simple op missing default_on gpio_led: set_state_simple op missing base-gpios sandbox_gpio: set_state_simple op missing default_off gpio_led: set_state_simple op missing wdt at 0 wdt_sandbox: set_state_simple op missing WDT: Started with servicing (60s timeout) MMC: mmc0 mmc_sandbox: set_state_simple op missing mmc1 mmc_sandbox: set_state_simple op missing mmc2 mmc_sandbox: set_state_simple op missing mmc2: 2 (SD), mmc1: 1 (SD), mmc0: 0 (SD) lcd sandbox_lcd_sdl: set_state_simple op missing In: serial Out: vidconsole Err: vidconsole Model: sandbox hog_input_active_low gpio_hog: set_state_simple op missing hog_input_active_high gpio_hog: set_state_simple op missing hog_output_low gpio_hog: set_state_simple op missing hog_output_high gpio_hog: set_state_simple op missing cros-ec google_cros_ec_sandbox: set_state_simple op missing SCSI: pci_ep pci_ep_sandbox: set_state_simple op missing Net: eth at 10002000 eth_sandbox: set_state_simple op missing eth0: eth at 10002000eth@10003000 eth_sandbox: set_state_simple op missing , eth5: eth at 10003000sbe5 eth_sandbox: set_state_simple op missing , eth3: sbe5eth at 10004000 eth_sandbox: set_state_simple op missing , eth6: eth at 10004000 bootcount at 0 bootcount-rtc: set_state_simple op missing i2c at 0 i2c_sandbox: set_state_simple op missing rtc at 61 rtc-sandbox: set_state_simple op missing emul i2c_emul_parent_drv: set_state_simple op missing emull sandbox_i2c_rtc_emul: set_state_simple op missing Hit any key to stop autoboot: When using CONFIG_LOG the output of U-Boot is too verbose to fit in this email. Note that there is a soft dependency on [1] if you would like to test this patch with CONFIG_LOG and a higher LOG_LEVEL than LOGL_INFO. [1] https://patchwork.ozlabs.org/project/uboot/list/?series=201343 Sean Anderson (4): remoteproc: Remove unused function rproc_elf_sanity_check net: mdio: Supply appropriate devices for dev_dgb calls dm: Use symbolic constants for log levels in dev_xxx() dm: Print device name in dev_xxx() like Linux drivers/remoteproc/rproc-elf-loader.c | 16 ------ include/dm/device_compat.h | 75 +++++++++++++-------------- include/remoteproc.h | 13 ----- net/mdio-uclass.c | 4 +- 4 files changed, 39 insertions(+), 69 deletions(-) -- 2.28.0