* [PATCH 0/3] Document r8a77990 DRIF support
@ 2020-09-15 13:12 Fabrizio Castro
2020-09-15 13:12 ` [PATCH 1/3] MAINTAINERS: Add Fabrizio Castro to Renesas DRIF Fabrizio Castro
` (2 more replies)
0 siblings, 3 replies; 12+ messages in thread
From: Fabrizio Castro @ 2020-09-15 13:12 UTC (permalink / raw)
To: Mauro Carvalho Chehab, Rob Herring, Geert Uytterhoeven
Cc: Fabrizio Castro, Ramesh Shanmugasundaram, linux-media,
devicetree, linux-kernel, linux-renesas-soc, Chris Paterson,
Biju Das, Prabhakar Mahadev Lad, Laurent Pinchart
Dear All,
this series documents DRIF support for the r8a77990
(a.k.a. R-Car E3).
Thanks,
Fab
Fabrizio Castro (3):
MAINTAINERS: Add Fabrizio Castro to Renesas DRIF
media: dt-bindings: media: renesas,drif: Convert to json-schema
media: dt-bindings: media: renesas,drif: Add r8a77990 support
.../bindings/media/renesas,drif.txt | 177 ------------
.../bindings/media/renesas,drif.yaml | 271 ++++++++++++++++++
MAINTAINERS | 3 +-
3 files changed, 273 insertions(+), 178 deletions(-)
delete mode 100644 Documentation/devicetree/bindings/media/renesas,drif.txt
create mode 100644 Documentation/devicetree/bindings/media/renesas,drif.yaml
--
2.25.1
^ permalink raw reply [flat|nested] 12+ messages in thread
* [PATCH 1/3] MAINTAINERS: Add Fabrizio Castro to Renesas DRIF
2020-09-15 13:12 [PATCH 0/3] Document r8a77990 DRIF support Fabrizio Castro
@ 2020-09-15 13:12 ` Fabrizio Castro
2020-09-15 16:11 ` Laurent Pinchart
2020-09-15 13:12 ` [PATCH 2/3] media: dt-bindings: media: renesas,drif: Convert to json-schema Fabrizio Castro
2020-09-15 13:12 ` [PATCH 3/3] media: dt-bindings: media: renesas,drif: Add r8a77990 support Fabrizio Castro
2 siblings, 1 reply; 12+ messages in thread
From: Fabrizio Castro @ 2020-09-15 13:12 UTC (permalink / raw)
To: Mauro Carvalho Chehab, Rob Herring, Geert Uytterhoeven
Cc: Fabrizio Castro, Ramesh Shanmugasundaram, linux-media,
devicetree, linux-kernel, linux-renesas-soc, Chris Paterson,
Biju Das, Prabhakar Mahadev Lad, Laurent Pinchart
Renesas are expanding their DRIF support and offering,
I'll be the internal maintainer for DRIF.
Signed-off-by: Fabrizio Castro <fabrizio.castro.jz@renesas.com>
---
MAINTAINERS | 1 +
1 file changed, 1 insertion(+)
diff --git a/MAINTAINERS b/MAINTAINERS
index 26af84f97353..9f49e5ac90d8 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -10898,6 +10898,7 @@ F: include/media/drv-intf/renesas-ceu.h
MEDIA DRIVERS FOR RENESAS - DRIF
M: Ramesh Shanmugasundaram <rashanmu@gmail.com>
+M: Fabrizio Castro <fabrizio.castro.jz@renesas.com>
L: linux-media@vger.kernel.org
L: linux-renesas-soc@vger.kernel.org
S: Supported
--
2.25.1
^ permalink raw reply related [flat|nested] 12+ messages in thread
* [PATCH 2/3] media: dt-bindings: media: renesas,drif: Convert to json-schema
2020-09-15 13:12 [PATCH 0/3] Document r8a77990 DRIF support Fabrizio Castro
2020-09-15 13:12 ` [PATCH 1/3] MAINTAINERS: Add Fabrizio Castro to Renesas DRIF Fabrizio Castro
@ 2020-09-15 13:12 ` Fabrizio Castro
2020-09-15 14:12 ` Lad, Prabhakar
2020-09-15 17:36 ` Laurent Pinchart
2020-09-15 13:12 ` [PATCH 3/3] media: dt-bindings: media: renesas,drif: Add r8a77990 support Fabrizio Castro
2 siblings, 2 replies; 12+ messages in thread
From: Fabrizio Castro @ 2020-09-15 13:12 UTC (permalink / raw)
To: Mauro Carvalho Chehab, Rob Herring, Geert Uytterhoeven
Cc: Fabrizio Castro, Ramesh Shanmugasundaram, linux-media,
devicetree, linux-kernel, linux-renesas-soc, Chris Paterson,
Biju Das, Prabhakar Mahadev Lad, Laurent Pinchart
Convert the Renesas DRIF bindings to DT schema and update
MAINTAINERS accordingly.
Signed-off-by: Fabrizio Castro <fabrizio.castro.jz@renesas.com>
---
.../bindings/media/renesas,drif.txt | 177 ------------
.../bindings/media/renesas,drif.yaml | 270 ++++++++++++++++++
MAINTAINERS | 2 +-
3 files changed, 271 insertions(+), 178 deletions(-)
delete mode 100644 Documentation/devicetree/bindings/media/renesas,drif.txt
create mode 100644 Documentation/devicetree/bindings/media/renesas,drif.yaml
diff --git a/Documentation/devicetree/bindings/media/renesas,drif.txt b/Documentation/devicetree/bindings/media/renesas,drif.txt
deleted file mode 100644
index 0d8974aa8b38..000000000000
--- a/Documentation/devicetree/bindings/media/renesas,drif.txt
+++ /dev/null
@@ -1,177 +0,0 @@
-Renesas R-Car Gen3 Digital Radio Interface controller (DRIF)
-------------------------------------------------------------
-
-R-Car Gen3 DRIF is a SPI like receive only slave device. A general
-representation of DRIF interfacing with a master device is shown below.
-
-+---------------------+ +---------------------+
-| |-----SCK------->|CLK |
-| Master |-----SS-------->|SYNC DRIFn (slave) |
-| |-----SD0------->|D0 |
-| |-----SD1------->|D1 |
-+---------------------+ +---------------------+
-
-As per datasheet, each DRIF channel (drifn) is made up of two internal
-channels (drifn0 & drifn1). These two internal channels share the common
-CLK & SYNC. Each internal channel has its own dedicated resources like
-irq, dma channels, address space & clock. This internal split is not
-visible to the external master device.
-
-The device tree model represents each internal channel as a separate node.
-The internal channels sharing the CLK & SYNC are tied together by their
-phandles using a property called "renesas,bonding". For the rest of
-the documentation, unless explicitly stated, the word channel implies an
-internal channel.
-
-When both internal channels are enabled they need to be managed together
-as one (i.e.) they cannot operate alone as independent devices. Out of the
-two, one of them needs to act as a primary device that accepts common
-properties of both the internal channels. This channel is identified by a
-property called "renesas,primary-bond".
-
-To summarize,
- - When both the internal channels that are bonded together are enabled,
- the zeroth channel is selected as primary-bond. This channels accepts
- properties common to all the members of the bond.
- - When only one of the bonded channels need to be enabled, the property
- "renesas,bonding" or "renesas,primary-bond" will have no effect. That
- enabled channel can act alone as any other independent device.
-
-Required properties of an internal channel:
--------------------------------------------
-- compatible: "renesas,r8a7795-drif" if DRIF controller is a part of R8A7795 SoC.
- "renesas,r8a7796-drif" if DRIF controller is a part of R8A7796 SoC.
- "renesas,rcar-gen3-drif" for a generic R-Car Gen3 compatible device.
-
- When compatible with the generic version, nodes must list the
- SoC-specific version corresponding to the platform first
- followed by the generic version.
-
-- reg: offset and length of that channel.
-- interrupts: associated with that channel.
-- clocks: phandle and clock specifier of that channel.
-- clock-names: clock input name string: "fck".
-- dmas: phandles to the DMA channels.
-- dma-names: names of the DMA channel: "rx".
-- renesas,bonding: phandle to the other channel.
-
-Optional properties of an internal channel:
--------------------------------------------
-- power-domains: phandle to the respective power domain.
-
-Required properties of an internal channel when:
- - It is the only enabled channel of the bond (or)
- - If it acts as primary among enabled bonds
---------------------------------------------------------
-- pinctrl-0: pin control group to be used for this channel.
-- pinctrl-names: must be "default".
-- renesas,primary-bond: empty property indicating the channel acts as primary
- among the bonded channels.
-- port: child port node corresponding to the data input, in accordance with
- the video interface bindings defined in
- Documentation/devicetree/bindings/media/video-interfaces.txt. The port
- node must contain at least one endpoint.
-
-Optional endpoint property:
----------------------------
-- sync-active: Indicates sync signal polarity, 0/1 for low/high respectively.
- This property maps to SYNCAC bit in the hardware manual. The
- default is 1 (active high).
-
-Example:
---------
-
-(1) Both internal channels enabled:
------------------------------------
-
-When interfacing with a third party tuner device with two data pins as shown
-below.
-
-+---------------------+ +---------------------+
-| |-----SCK------->|CLK |
-| Master |-----SS-------->|SYNC DRIFn (slave) |
-| |-----SD0------->|D0 |
-| |-----SD1------->|D1 |
-+---------------------+ +---------------------+
-
- drif00: rif@e6f40000 {
- compatible = "renesas,r8a7795-drif",
- "renesas,rcar-gen3-drif";
- reg = <0 0xe6f40000 0 0x64>;
- interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&cpg CPG_MOD 515>;
- clock-names = "fck";
- dmas = <&dmac1 0x20>, <&dmac2 0x20>;
- dma-names = "rx", "rx";
- power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
- renesas,bonding = <&drif01>;
- renesas,primary-bond;
- pinctrl-0 = <&drif0_pins>;
- pinctrl-names = "default";
- port {
- drif0_ep: endpoint {
- remote-endpoint = <&tuner_ep>;
- };
- };
- };
-
- drif01: rif@e6f50000 {
- compatible = "renesas,r8a7795-drif",
- "renesas,rcar-gen3-drif";
- reg = <0 0xe6f50000 0 0x64>;
- interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&cpg CPG_MOD 514>;
- clock-names = "fck";
- dmas = <&dmac1 0x22>, <&dmac2 0x22>;
- dma-names = "rx", "rx";
- power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
- renesas,bonding = <&drif00>;
- };
-
-
-(2) Internal channel 1 alone is enabled:
-----------------------------------------
-
-When interfacing with a third party tuner device with one data pin as shown
-below.
-
-+---------------------+ +---------------------+
-| |-----SCK------->|CLK |
-| Master |-----SS-------->|SYNC DRIFn (slave) |
-| | |D0 (unused) |
-| |-----SD-------->|D1 |
-+---------------------+ +---------------------+
-
- drif00: rif@e6f40000 {
- compatible = "renesas,r8a7795-drif",
- "renesas,rcar-gen3-drif";
- reg = <0 0xe6f40000 0 0x64>;
- interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&cpg CPG_MOD 515>;
- clock-names = "fck";
- dmas = <&dmac1 0x20>, <&dmac2 0x20>;
- dma-names = "rx", "rx";
- power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
- renesas,bonding = <&drif01>;
- };
-
- drif01: rif@e6f50000 {
- compatible = "renesas,r8a7795-drif",
- "renesas,rcar-gen3-drif";
- reg = <0 0xe6f50000 0 0x64>;
- interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&cpg CPG_MOD 514>;
- clock-names = "fck";
- dmas = <&dmac1 0x22>, <&dmac2 0x22>;
- dma-names = "rx", "rx";
- power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
- renesas,bonding = <&drif00>;
- pinctrl-0 = <&drif0_pins>;
- pinctrl-names = "default";
- port {
- drif0_ep: endpoint {
- remote-endpoint = <&tuner_ep>;
- sync-active = <0>;
- };
- };
- };
diff --git a/Documentation/devicetree/bindings/media/renesas,drif.yaml b/Documentation/devicetree/bindings/media/renesas,drif.yaml
new file mode 100644
index 000000000000..f57fccc159d6
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/renesas,drif.yaml
@@ -0,0 +1,270 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/media/renesas,drif.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Renesas R-Car Gen3 Digital Radio Interface controller (DRIF)
+
+maintainers:
+ - Ramesh Shanmugasundaram <rashanmu@gmail.com>
+ - Fabrizio Castro <fabrizio.castro.jz@renesas.com>
+
+description: |
+ R-Car Gen3 DRIF is a SPI like receive only slave device. A general
+ representation of DRIF interfacing with a master device is shown below.
+
+ +---------------------+ +---------------------+
+ | |-----SCK------->|CLK |
+ | Master |-----SS-------->|SYNC DRIFn (slave) |
+ | |-----SD0------->|D0 |
+ | |-----SD1------->|D1 |
+ +---------------------+ +---------------------+
+
+ As per datasheet, each DRIF channel (drifn) is made up of two internal
+ channels (drifn0 & drifn1). These two internal channels share the common
+ CLK & SYNC. Each internal channel has its own dedicated resources like
+ irq, dma channels, address space & clock. This internal split is not
+ visible to the external master device.
+
+ The device tree model represents each internal channel as a separate node.
+ The internal channels sharing the CLK & SYNC are tied together by their
+ phandles using a property called "renesas,bonding". For the rest of
+ the documentation, unless explicitly stated, the word channel implies an
+ internal channel.
+
+ When both internal channels are enabled they need to be managed together
+ as one (i.e.) they cannot operate alone as independent devices. Out of the
+ two, one of them needs to act as a primary device that accepts common
+ properties of both the internal channels. This channel is identified by a
+ property called "renesas,primary-bond".
+
+ To summarize,
+ * When both the internal channels that are bonded together are enabled,
+ the zeroth channel is selected as primary-bond. This channels accepts
+ properties common to all the members of the bond.
+ * When only one of the bonded channels need to be enabled, the property
+ "renesas,bonding" or "renesas,primary-bond" will have no effect. That
+ enabled channel can act alone as any other independent device.
+
+properties:
+ compatible:
+ items:
+ - enum:
+ - renesas,r8a7795-drif # R-Car H3
+ - renesas,r8a7796-drif # R-Car M3-W
+ - const: renesas,rcar-gen3-drif # Generic R-Car Gen3 compatible device
+
+ reg:
+ maxItems: 1
+
+ interrupts:
+ maxItems: 1
+
+ clocks:
+ maxItems: 1
+
+ clock-names:
+ maxItems: 1
+ items:
+ - const: fck
+
+ resets:
+ maxItems: 1
+
+ dmas:
+ minItems: 1
+ maxItems: 2
+
+ dma-names:
+ minItems: 1
+ maxItems: 2
+ items:
+ - const: rx
+ - const: rx
+
+ renesas,bonding:
+ $ref: /schemas/types.yaml#/definitions/phandle
+ description:
+ The phandle to the other internal channel of DRIF
+
+ power-domains:
+ maxItems: 1
+
+ pinctrl-0:
+ maxItems: 1
+
+ pinctrl-names:
+ maxItems: 1
+ items:
+ - const: default
+
+ renesas,primary-bond:
+ type: boolean
+ description:
+ Indicates that the channel acts as primary among the bonded channels.
+
+ port:
+ type: object
+ description:
+ Child port node corresponding to the data input, in accordance with the
+ video interface bindings defined in
+ Documentation/devicetree/bindings/media/video-interfaces.txt.
+ The port node must contain at least one endpoint.
+
+ properties:
+ endpoint:
+ type: object
+
+ properties:
+ remote-endpoint:
+ description:
+ A phandle to the remote tuner endpoint subnode in remote node
+ port.
+
+ sync-active:
+ enum: [0, 1]
+ description:
+ Indicates sync signal polarity, 0/1 for low/high respectively.
+ This property maps to SYNCAC bit in the hardware manual. The
+ default is 1 (active high).
+
+ additionalProperties: false
+
+required:
+ - compatible
+ - reg
+ - interrupts
+ - clocks
+ - clock-names
+ - resets
+ - dmas
+ - dma-names
+ - renesas,bonding
+
+if:
+ required:
+ - renesas,primary-bond
+then:
+ required:
+ - pinctrl-0
+ - pinctrl-names
+ - port
+
+additionalProperties: false
+
+examples:
+ # Example with both internal channels enabled.
+ #
+ # When interfacing with a third party tuner device with two data pins as shown
+ # below.
+ #
+ # +---------------------+ +---------------------+
+ # | |-----SCK------->|CLK |
+ # | Master |-----SS-------->|SYNC DRIFn (slave) |
+ # | |-----SD0------->|D0 |
+ # | |-----SD1------->|D1 |
+ # +---------------------+ +---------------------+
+ - |
+ #include <dt-bindings/clock/r8a7795-cpg-mssr.h>
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+ #include <dt-bindings/power/r8a7795-sysc.h>
+
+ soc {
+ #address-cells = <2>;
+ #size-cells = <2>;
+
+ drif00: rif@e6f40000 {
+ compatible = "renesas,r8a7795-drif",
+ "renesas,rcar-gen3-drif";
+ reg = <0 0xe6f40000 0 0x64>;
+ interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 515>;
+ clock-names = "fck";
+ dmas = <&dmac1 0x20>, <&dmac2 0x20>;
+ dma-names = "rx", "rx";
+ power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
+ renesas,bonding = <&drif01>;
+ resets = <&cpg 515>;
+ renesas,primary-bond;
+ pinctrl-0 = <&drif0_pins>;
+ pinctrl-names = "default";
+ port {
+ drif0_ep: endpoint {
+ remote-endpoint = <&tuner_ep>;
+ };
+ };
+ };
+
+ drif01: rif@e6f50000 {
+ compatible = "renesas,r8a7795-drif",
+ "renesas,rcar-gen3-drif";
+ reg = <0 0xe6f50000 0 0x64>;
+ interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 514>;
+ clock-names = "fck";
+ dmas = <&dmac1 0x22>, <&dmac2 0x22>;
+ dma-names = "rx", "rx";
+ power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
+ renesas,bonding = <&drif00>;
+ resets = <&cpg 514>;
+ };
+ };
+
+ # Example with internal channel 1 alone enabled.
+ #
+ # When interfacing with a third party tuner device with one data pin as shown
+ # below.
+ #
+ # +---------------------+ +---------------------+
+ # | |-----SCK------->|CLK |
+ # | Master |-----SS-------->|SYNC DRIFn (slave) |
+ # | | |D0 (unused) |
+ # | |-----SD-------->|D1 |
+ # +---------------------+ +---------------------+
+ - |
+ #include <dt-bindings/clock/r8a7795-cpg-mssr.h>
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+ #include <dt-bindings/power/r8a7795-sysc.h>
+
+ soc {
+ #address-cells = <2>;
+ #size-cells = <2>;
+
+ drif10: rif@e6f60000 {
+ compatible = "renesas,r8a7795-drif",
+ "renesas,rcar-gen3-drif";
+ reg = <0 0xe6f60000 0 0x64>;
+ interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 513>;
+ clock-names = "fck";
+ dmas = <&dmac1 0x24>, <&dmac2 0x24>;
+ dma-names = "rx", "rx";
+ power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
+ resets = <&cpg 513>;
+ renesas,bonding = <&drif11>;
+ };
+
+ drif11: rif@e6f70000 {
+ compatible = "renesas,r8a7795-drif",
+ "renesas,rcar-gen3-drif";
+ reg = <0 0xe6f70000 0 0x64>;
+ interrupts = <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 512>;
+ clock-names = "fck";
+ dmas = <&dmac1 0x26>, <&dmac2 0x26>;
+ dma-names = "rx", "rx";
+ power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
+ resets = <&cpg 512>;
+ renesas,bonding = <&drif10>;
+ pinctrl-0 = <&drif1_pins>;
+ pinctrl-names = "default";
+ port {
+ drif1_ep: endpoint {
+ remote-endpoint = <&tuner_ep1>;
+ sync-active = <0>;
+ };
+ };
+ };
+ };
+...
diff --git a/MAINTAINERS b/MAINTAINERS
index 9f49e5ac90d8..3e2a1cad3749 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -10903,7 +10903,7 @@ L: linux-media@vger.kernel.org
L: linux-renesas-soc@vger.kernel.org
S: Supported
T: git git://linuxtv.org/media_tree.git
-F: Documentation/devicetree/bindings/media/renesas,drif.txt
+F: Documentation/devicetree/bindings/media/renesas,drif.yaml
F: drivers/media/platform/rcar_drif.c
MEDIA DRIVERS FOR RENESAS - FCP
--
2.25.1
^ permalink raw reply related [flat|nested] 12+ messages in thread
* [PATCH 3/3] media: dt-bindings: media: renesas,drif: Add r8a77990 support
2020-09-15 13:12 [PATCH 0/3] Document r8a77990 DRIF support Fabrizio Castro
2020-09-15 13:12 ` [PATCH 1/3] MAINTAINERS: Add Fabrizio Castro to Renesas DRIF Fabrizio Castro
2020-09-15 13:12 ` [PATCH 2/3] media: dt-bindings: media: renesas,drif: Convert to json-schema Fabrizio Castro
@ 2020-09-15 13:12 ` Fabrizio Castro
2020-09-15 13:31 ` Geert Uytterhoeven
` (2 more replies)
2 siblings, 3 replies; 12+ messages in thread
From: Fabrizio Castro @ 2020-09-15 13:12 UTC (permalink / raw)
To: Mauro Carvalho Chehab, Rob Herring, Geert Uytterhoeven
Cc: Fabrizio Castro, Ramesh Shanmugasundaram, linux-media,
devicetree, linux-kernel, linux-renesas-soc, Chris Paterson,
Biju Das, Prabhakar Mahadev Lad, Laurent Pinchart
The r8a77990 (a.k.a. R-Car E3) device tree schema is
compatible with R-Car H3 and M3-W schema.
Document r8a77990 support within renesas,drif.yaml.
Signed-off-by: Fabrizio Castro <fabrizio.castro.jz@renesas.com>
---
Documentation/devicetree/bindings/media/renesas,drif.yaml | 1 +
1 file changed, 1 insertion(+)
diff --git a/Documentation/devicetree/bindings/media/renesas,drif.yaml b/Documentation/devicetree/bindings/media/renesas,drif.yaml
index f57fccc159d6..051d515be38d 100644
--- a/Documentation/devicetree/bindings/media/renesas,drif.yaml
+++ b/Documentation/devicetree/bindings/media/renesas,drif.yaml
@@ -53,6 +53,7 @@ properties:
- enum:
- renesas,r8a7795-drif # R-Car H3
- renesas,r8a7796-drif # R-Car M3-W
+ - renesas,r8a77990-drif # R-Car E3
- const: renesas,rcar-gen3-drif # Generic R-Car Gen3 compatible device
reg:
--
2.25.1
^ permalink raw reply related [flat|nested] 12+ messages in thread
* Re: [PATCH 3/3] media: dt-bindings: media: renesas,drif: Add r8a77990 support
2020-09-15 13:12 ` [PATCH 3/3] media: dt-bindings: media: renesas,drif: Add r8a77990 support Fabrizio Castro
@ 2020-09-15 13:31 ` Geert Uytterhoeven
2020-09-15 14:13 ` Lad, Prabhakar
2020-09-15 17:37 ` Laurent Pinchart
2 siblings, 0 replies; 12+ messages in thread
From: Geert Uytterhoeven @ 2020-09-15 13:31 UTC (permalink / raw)
To: Fabrizio Castro
Cc: Mauro Carvalho Chehab, Rob Herring, Ramesh Shanmugasundaram,
Linux Media Mailing List,
open list:OPEN FIRMWARE AND FLATTENED DEVICE TREE BINDINGS,
Linux Kernel Mailing List, Linux-Renesas, Chris Paterson,
Biju Das, Prabhakar Mahadev Lad, Laurent Pinchart
On Tue, Sep 15, 2020 at 3:12 PM Fabrizio Castro
<fabrizio.castro.jz@renesas.com> wrote:
> The r8a77990 (a.k.a. R-Car E3) device tree schema is
> compatible with R-Car H3 and M3-W schema.
>
> Document r8a77990 support within renesas,drif.yaml.
>
> Signed-off-by: Fabrizio Castro <fabrizio.castro.jz@renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Gr{oetje,eeting}s,
Geert
--
Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert@linux-m68k.org
In personal conversations with technical people, I call myself a hacker. But
when I'm talking to journalists I just say "programmer" or something like that.
-- Linus Torvalds
^ permalink raw reply [flat|nested] 12+ messages in thread
* Re: [PATCH 2/3] media: dt-bindings: media: renesas,drif: Convert to json-schema
2020-09-15 13:12 ` [PATCH 2/3] media: dt-bindings: media: renesas,drif: Convert to json-schema Fabrizio Castro
@ 2020-09-15 14:12 ` Lad, Prabhakar
2020-09-15 17:36 ` Laurent Pinchart
1 sibling, 0 replies; 12+ messages in thread
From: Lad, Prabhakar @ 2020-09-15 14:12 UTC (permalink / raw)
To: Fabrizio Castro
Cc: Mauro Carvalho Chehab, Rob Herring, Geert Uytterhoeven,
Ramesh Shanmugasundaram, linux-media,
open list:OPEN FIRMWARE AND FLATTENED DEVICE TREE BINDINGS, LKML,
Linux-Renesas, Chris Paterson, Biju Das, Prabhakar Mahadev Lad,
Laurent Pinchart
Hi Fabrizio,
Thank you for the patch.
On Tue, Sep 15, 2020 at 2:14 PM Fabrizio Castro
<fabrizio.castro.jz@renesas.com> wrote:
>
> Convert the Renesas DRIF bindings to DT schema and update
> MAINTAINERS accordingly.
>
> Signed-off-by: Fabrizio Castro <fabrizio.castro.jz@renesas.com>
> ---
> .../bindings/media/renesas,drif.txt | 177 ------------
> .../bindings/media/renesas,drif.yaml | 270 ++++++++++++++++++
> MAINTAINERS | 2 +-
> 3 files changed, 271 insertions(+), 178 deletions(-)
> delete mode 100644 Documentation/devicetree/bindings/media/renesas,drif.txt
> create mode 100644 Documentation/devicetree/bindings/media/renesas,drif.yaml
>
Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Cheers,
Prabhakar
> diff --git a/Documentation/devicetree/bindings/media/renesas,drif.txt b/Documentation/devicetree/bindings/media/renesas,drif.txt
> deleted file mode 100644
> index 0d8974aa8b38..000000000000
> --- a/Documentation/devicetree/bindings/media/renesas,drif.txt
> +++ /dev/null
> @@ -1,177 +0,0 @@
> -Renesas R-Car Gen3 Digital Radio Interface controller (DRIF)
> -------------------------------------------------------------
> -
> -R-Car Gen3 DRIF is a SPI like receive only slave device. A general
> -representation of DRIF interfacing with a master device is shown below.
> -
> -+---------------------+ +---------------------+
> -| |-----SCK------->|CLK |
> -| Master |-----SS-------->|SYNC DRIFn (slave) |
> -| |-----SD0------->|D0 |
> -| |-----SD1------->|D1 |
> -+---------------------+ +---------------------+
> -
> -As per datasheet, each DRIF channel (drifn) is made up of two internal
> -channels (drifn0 & drifn1). These two internal channels share the common
> -CLK & SYNC. Each internal channel has its own dedicated resources like
> -irq, dma channels, address space & clock. This internal split is not
> -visible to the external master device.
> -
> -The device tree model represents each internal channel as a separate node.
> -The internal channels sharing the CLK & SYNC are tied together by their
> -phandles using a property called "renesas,bonding". For the rest of
> -the documentation, unless explicitly stated, the word channel implies an
> -internal channel.
> -
> -When both internal channels are enabled they need to be managed together
> -as one (i.e.) they cannot operate alone as independent devices. Out of the
> -two, one of them needs to act as a primary device that accepts common
> -properties of both the internal channels. This channel is identified by a
> -property called "renesas,primary-bond".
> -
> -To summarize,
> - - When both the internal channels that are bonded together are enabled,
> - the zeroth channel is selected as primary-bond. This channels accepts
> - properties common to all the members of the bond.
> - - When only one of the bonded channels need to be enabled, the property
> - "renesas,bonding" or "renesas,primary-bond" will have no effect. That
> - enabled channel can act alone as any other independent device.
> -
> -Required properties of an internal channel:
> --------------------------------------------
> -- compatible: "renesas,r8a7795-drif" if DRIF controller is a part of R8A7795 SoC.
> - "renesas,r8a7796-drif" if DRIF controller is a part of R8A7796 SoC.
> - "renesas,rcar-gen3-drif" for a generic R-Car Gen3 compatible device.
> -
> - When compatible with the generic version, nodes must list the
> - SoC-specific version corresponding to the platform first
> - followed by the generic version.
> -
> -- reg: offset and length of that channel.
> -- interrupts: associated with that channel.
> -- clocks: phandle and clock specifier of that channel.
> -- clock-names: clock input name string: "fck".
> -- dmas: phandles to the DMA channels.
> -- dma-names: names of the DMA channel: "rx".
> -- renesas,bonding: phandle to the other channel.
> -
> -Optional properties of an internal channel:
> --------------------------------------------
> -- power-domains: phandle to the respective power domain.
> -
> -Required properties of an internal channel when:
> - - It is the only enabled channel of the bond (or)
> - - If it acts as primary among enabled bonds
> ---------------------------------------------------------
> -- pinctrl-0: pin control group to be used for this channel.
> -- pinctrl-names: must be "default".
> -- renesas,primary-bond: empty property indicating the channel acts as primary
> - among the bonded channels.
> -- port: child port node corresponding to the data input, in accordance with
> - the video interface bindings defined in
> - Documentation/devicetree/bindings/media/video-interfaces.txt. The port
> - node must contain at least one endpoint.
> -
> -Optional endpoint property:
> ----------------------------
> -- sync-active: Indicates sync signal polarity, 0/1 for low/high respectively.
> - This property maps to SYNCAC bit in the hardware manual. The
> - default is 1 (active high).
> -
> -Example:
> ---------
> -
> -(1) Both internal channels enabled:
> ------------------------------------
> -
> -When interfacing with a third party tuner device with two data pins as shown
> -below.
> -
> -+---------------------+ +---------------------+
> -| |-----SCK------->|CLK |
> -| Master |-----SS-------->|SYNC DRIFn (slave) |
> -| |-----SD0------->|D0 |
> -| |-----SD1------->|D1 |
> -+---------------------+ +---------------------+
> -
> - drif00: rif@e6f40000 {
> - compatible = "renesas,r8a7795-drif",
> - "renesas,rcar-gen3-drif";
> - reg = <0 0xe6f40000 0 0x64>;
> - interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
> - clocks = <&cpg CPG_MOD 515>;
> - clock-names = "fck";
> - dmas = <&dmac1 0x20>, <&dmac2 0x20>;
> - dma-names = "rx", "rx";
> - power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
> - renesas,bonding = <&drif01>;
> - renesas,primary-bond;
> - pinctrl-0 = <&drif0_pins>;
> - pinctrl-names = "default";
> - port {
> - drif0_ep: endpoint {
> - remote-endpoint = <&tuner_ep>;
> - };
> - };
> - };
> -
> - drif01: rif@e6f50000 {
> - compatible = "renesas,r8a7795-drif",
> - "renesas,rcar-gen3-drif";
> - reg = <0 0xe6f50000 0 0x64>;
> - interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
> - clocks = <&cpg CPG_MOD 514>;
> - clock-names = "fck";
> - dmas = <&dmac1 0x22>, <&dmac2 0x22>;
> - dma-names = "rx", "rx";
> - power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
> - renesas,bonding = <&drif00>;
> - };
> -
> -
> -(2) Internal channel 1 alone is enabled:
> -----------------------------------------
> -
> -When interfacing with a third party tuner device with one data pin as shown
> -below.
> -
> -+---------------------+ +---------------------+
> -| |-----SCK------->|CLK |
> -| Master |-----SS-------->|SYNC DRIFn (slave) |
> -| | |D0 (unused) |
> -| |-----SD-------->|D1 |
> -+---------------------+ +---------------------+
> -
> - drif00: rif@e6f40000 {
> - compatible = "renesas,r8a7795-drif",
> - "renesas,rcar-gen3-drif";
> - reg = <0 0xe6f40000 0 0x64>;
> - interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
> - clocks = <&cpg CPG_MOD 515>;
> - clock-names = "fck";
> - dmas = <&dmac1 0x20>, <&dmac2 0x20>;
> - dma-names = "rx", "rx";
> - power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
> - renesas,bonding = <&drif01>;
> - };
> -
> - drif01: rif@e6f50000 {
> - compatible = "renesas,r8a7795-drif",
> - "renesas,rcar-gen3-drif";
> - reg = <0 0xe6f50000 0 0x64>;
> - interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
> - clocks = <&cpg CPG_MOD 514>;
> - clock-names = "fck";
> - dmas = <&dmac1 0x22>, <&dmac2 0x22>;
> - dma-names = "rx", "rx";
> - power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
> - renesas,bonding = <&drif00>;
> - pinctrl-0 = <&drif0_pins>;
> - pinctrl-names = "default";
> - port {
> - drif0_ep: endpoint {
> - remote-endpoint = <&tuner_ep>;
> - sync-active = <0>;
> - };
> - };
> - };
> diff --git a/Documentation/devicetree/bindings/media/renesas,drif.yaml b/Documentation/devicetree/bindings/media/renesas,drif.yaml
> new file mode 100644
> index 000000000000..f57fccc159d6
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/media/renesas,drif.yaml
> @@ -0,0 +1,270 @@
> +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/media/renesas,drif.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Renesas R-Car Gen3 Digital Radio Interface controller (DRIF)
> +
> +maintainers:
> + - Ramesh Shanmugasundaram <rashanmu@gmail.com>
> + - Fabrizio Castro <fabrizio.castro.jz@renesas.com>
> +
> +description: |
> + R-Car Gen3 DRIF is a SPI like receive only slave device. A general
> + representation of DRIF interfacing with a master device is shown below.
> +
> + +---------------------+ +---------------------+
> + | |-----SCK------->|CLK |
> + | Master |-----SS-------->|SYNC DRIFn (slave) |
> + | |-----SD0------->|D0 |
> + | |-----SD1------->|D1 |
> + +---------------------+ +---------------------+
> +
> + As per datasheet, each DRIF channel (drifn) is made up of two internal
> + channels (drifn0 & drifn1). These two internal channels share the common
> + CLK & SYNC. Each internal channel has its own dedicated resources like
> + irq, dma channels, address space & clock. This internal split is not
> + visible to the external master device.
> +
> + The device tree model represents each internal channel as a separate node.
> + The internal channels sharing the CLK & SYNC are tied together by their
> + phandles using a property called "renesas,bonding". For the rest of
> + the documentation, unless explicitly stated, the word channel implies an
> + internal channel.
> +
> + When both internal channels are enabled they need to be managed together
> + as one (i.e.) they cannot operate alone as independent devices. Out of the
> + two, one of them needs to act as a primary device that accepts common
> + properties of both the internal channels. This channel is identified by a
> + property called "renesas,primary-bond".
> +
> + To summarize,
> + * When both the internal channels that are bonded together are enabled,
> + the zeroth channel is selected as primary-bond. This channels accepts
> + properties common to all the members of the bond.
> + * When only one of the bonded channels need to be enabled, the property
> + "renesas,bonding" or "renesas,primary-bond" will have no effect. That
> + enabled channel can act alone as any other independent device.
> +
> +properties:
> + compatible:
> + items:
> + - enum:
> + - renesas,r8a7795-drif # R-Car H3
> + - renesas,r8a7796-drif # R-Car M3-W
> + - const: renesas,rcar-gen3-drif # Generic R-Car Gen3 compatible device
> +
> + reg:
> + maxItems: 1
> +
> + interrupts:
> + maxItems: 1
> +
> + clocks:
> + maxItems: 1
> +
> + clock-names:
> + maxItems: 1
> + items:
> + - const: fck
> +
> + resets:
> + maxItems: 1
> +
> + dmas:
> + minItems: 1
> + maxItems: 2
> +
> + dma-names:
> + minItems: 1
> + maxItems: 2
> + items:
> + - const: rx
> + - const: rx
> +
> + renesas,bonding:
> + $ref: /schemas/types.yaml#/definitions/phandle
> + description:
> + The phandle to the other internal channel of DRIF
> +
> + power-domains:
> + maxItems: 1
> +
> + pinctrl-0:
> + maxItems: 1
> +
> + pinctrl-names:
> + maxItems: 1
> + items:
> + - const: default
> +
> + renesas,primary-bond:
> + type: boolean
> + description:
> + Indicates that the channel acts as primary among the bonded channels.
> +
> + port:
> + type: object
> + description:
> + Child port node corresponding to the data input, in accordance with the
> + video interface bindings defined in
> + Documentation/devicetree/bindings/media/video-interfaces.txt.
> + The port node must contain at least one endpoint.
> +
> + properties:
> + endpoint:
> + type: object
> +
> + properties:
> + remote-endpoint:
> + description:
> + A phandle to the remote tuner endpoint subnode in remote node
> + port.
> +
> + sync-active:
> + enum: [0, 1]
> + description:
> + Indicates sync signal polarity, 0/1 for low/high respectively.
> + This property maps to SYNCAC bit in the hardware manual. The
> + default is 1 (active high).
> +
> + additionalProperties: false
> +
> +required:
> + - compatible
> + - reg
> + - interrupts
> + - clocks
> + - clock-names
> + - resets
> + - dmas
> + - dma-names
> + - renesas,bonding
> +
> +if:
> + required:
> + - renesas,primary-bond
> +then:
> + required:
> + - pinctrl-0
> + - pinctrl-names
> + - port
> +
> +additionalProperties: false
> +
> +examples:
> + # Example with both internal channels enabled.
> + #
> + # When interfacing with a third party tuner device with two data pins as shown
> + # below.
> + #
> + # +---------------------+ +---------------------+
> + # | |-----SCK------->|CLK |
> + # | Master |-----SS-------->|SYNC DRIFn (slave) |
> + # | |-----SD0------->|D0 |
> + # | |-----SD1------->|D1 |
> + # +---------------------+ +---------------------+
> + - |
> + #include <dt-bindings/clock/r8a7795-cpg-mssr.h>
> + #include <dt-bindings/interrupt-controller/arm-gic.h>
> + #include <dt-bindings/power/r8a7795-sysc.h>
> +
> + soc {
> + #address-cells = <2>;
> + #size-cells = <2>;
> +
> + drif00: rif@e6f40000 {
> + compatible = "renesas,r8a7795-drif",
> + "renesas,rcar-gen3-drif";
> + reg = <0 0xe6f40000 0 0x64>;
> + interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
> + clocks = <&cpg CPG_MOD 515>;
> + clock-names = "fck";
> + dmas = <&dmac1 0x20>, <&dmac2 0x20>;
> + dma-names = "rx", "rx";
> + power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
> + renesas,bonding = <&drif01>;
> + resets = <&cpg 515>;
> + renesas,primary-bond;
> + pinctrl-0 = <&drif0_pins>;
> + pinctrl-names = "default";
> + port {
> + drif0_ep: endpoint {
> + remote-endpoint = <&tuner_ep>;
> + };
> + };
> + };
> +
> + drif01: rif@e6f50000 {
> + compatible = "renesas,r8a7795-drif",
> + "renesas,rcar-gen3-drif";
> + reg = <0 0xe6f50000 0 0x64>;
> + interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
> + clocks = <&cpg CPG_MOD 514>;
> + clock-names = "fck";
> + dmas = <&dmac1 0x22>, <&dmac2 0x22>;
> + dma-names = "rx", "rx";
> + power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
> + renesas,bonding = <&drif00>;
> + resets = <&cpg 514>;
> + };
> + };
> +
> + # Example with internal channel 1 alone enabled.
> + #
> + # When interfacing with a third party tuner device with one data pin as shown
> + # below.
> + #
> + # +---------------------+ +---------------------+
> + # | |-----SCK------->|CLK |
> + # | Master |-----SS-------->|SYNC DRIFn (slave) |
> + # | | |D0 (unused) |
> + # | |-----SD-------->|D1 |
> + # +---------------------+ +---------------------+
> + - |
> + #include <dt-bindings/clock/r8a7795-cpg-mssr.h>
> + #include <dt-bindings/interrupt-controller/arm-gic.h>
> + #include <dt-bindings/power/r8a7795-sysc.h>
> +
> + soc {
> + #address-cells = <2>;
> + #size-cells = <2>;
> +
> + drif10: rif@e6f60000 {
> + compatible = "renesas,r8a7795-drif",
> + "renesas,rcar-gen3-drif";
> + reg = <0 0xe6f60000 0 0x64>;
> + interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
> + clocks = <&cpg CPG_MOD 513>;
> + clock-names = "fck";
> + dmas = <&dmac1 0x24>, <&dmac2 0x24>;
> + dma-names = "rx", "rx";
> + power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
> + resets = <&cpg 513>;
> + renesas,bonding = <&drif11>;
> + };
> +
> + drif11: rif@e6f70000 {
> + compatible = "renesas,r8a7795-drif",
> + "renesas,rcar-gen3-drif";
> + reg = <0 0xe6f70000 0 0x64>;
> + interrupts = <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>;
> + clocks = <&cpg CPG_MOD 512>;
> + clock-names = "fck";
> + dmas = <&dmac1 0x26>, <&dmac2 0x26>;
> + dma-names = "rx", "rx";
> + power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
> + resets = <&cpg 512>;
> + renesas,bonding = <&drif10>;
> + pinctrl-0 = <&drif1_pins>;
> + pinctrl-names = "default";
> + port {
> + drif1_ep: endpoint {
> + remote-endpoint = <&tuner_ep1>;
> + sync-active = <0>;
> + };
> + };
> + };
> + };
> +...
> diff --git a/MAINTAINERS b/MAINTAINERS
> index 9f49e5ac90d8..3e2a1cad3749 100644
> --- a/MAINTAINERS
> +++ b/MAINTAINERS
> @@ -10903,7 +10903,7 @@ L: linux-media@vger.kernel.org
> L: linux-renesas-soc@vger.kernel.org
> S: Supported
> T: git git://linuxtv.org/media_tree.git
> -F: Documentation/devicetree/bindings/media/renesas,drif.txt
> +F: Documentation/devicetree/bindings/media/renesas,drif.yaml
> F: drivers/media/platform/rcar_drif.c
>
> MEDIA DRIVERS FOR RENESAS - FCP
> --
> 2.25.1
>
^ permalink raw reply [flat|nested] 12+ messages in thread
* Re: [PATCH 3/3] media: dt-bindings: media: renesas,drif: Add r8a77990 support
2020-09-15 13:12 ` [PATCH 3/3] media: dt-bindings: media: renesas,drif: Add r8a77990 support Fabrizio Castro
2020-09-15 13:31 ` Geert Uytterhoeven
@ 2020-09-15 14:13 ` Lad, Prabhakar
2020-09-15 17:37 ` Laurent Pinchart
2 siblings, 0 replies; 12+ messages in thread
From: Lad, Prabhakar @ 2020-09-15 14:13 UTC (permalink / raw)
To: Fabrizio Castro
Cc: Mauro Carvalho Chehab, Rob Herring, Geert Uytterhoeven,
Ramesh Shanmugasundaram, linux-media,
open list:OPEN FIRMWARE AND FLATTENED DEVICE TREE BINDINGS, LKML,
Linux-Renesas, Chris Paterson, Biju Das, Prabhakar Mahadev Lad,
Laurent Pinchart
Hi Fabrizio,
Thank you for the patch.
On Tue, Sep 15, 2020 at 2:19 PM Fabrizio Castro
<fabrizio.castro.jz@renesas.com> wrote:
>
> The r8a77990 (a.k.a. R-Car E3) device tree schema is
> compatible with R-Car H3 and M3-W schema.
>
> Document r8a77990 support within renesas,drif.yaml.
>
> Signed-off-by: Fabrizio Castro <fabrizio.castro.jz@renesas.com>
> ---
> Documentation/devicetree/bindings/media/renesas,drif.yaml | 1 +
> 1 file changed, 1 insertion(+)
>
Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Cheers,
Prabhakar
> diff --git a/Documentation/devicetree/bindings/media/renesas,drif.yaml b/Documentation/devicetree/bindings/media/renesas,drif.yaml
> index f57fccc159d6..051d515be38d 100644
> --- a/Documentation/devicetree/bindings/media/renesas,drif.yaml
> +++ b/Documentation/devicetree/bindings/media/renesas,drif.yaml
> @@ -53,6 +53,7 @@ properties:
> - enum:
> - renesas,r8a7795-drif # R-Car H3
> - renesas,r8a7796-drif # R-Car M3-W
> + - renesas,r8a77990-drif # R-Car E3
> - const: renesas,rcar-gen3-drif # Generic R-Car Gen3 compatible device
>
> reg:
> --
> 2.25.1
>
^ permalink raw reply [flat|nested] 12+ messages in thread
* Re: [PATCH 1/3] MAINTAINERS: Add Fabrizio Castro to Renesas DRIF
2020-09-15 13:12 ` [PATCH 1/3] MAINTAINERS: Add Fabrizio Castro to Renesas DRIF Fabrizio Castro
@ 2020-09-15 16:11 ` Laurent Pinchart
0 siblings, 0 replies; 12+ messages in thread
From: Laurent Pinchart @ 2020-09-15 16:11 UTC (permalink / raw)
To: Fabrizio Castro
Cc: Mauro Carvalho Chehab, Rob Herring, Geert Uytterhoeven,
Ramesh Shanmugasundaram, linux-media, devicetree, linux-kernel,
linux-renesas-soc, Chris Paterson, Biju Das,
Prabhakar Mahadev Lad
Hi Fabrizio,
Thank you for the patch.
On Tue, Sep 15, 2020 at 02:12:14PM +0100, Fabrizio Castro wrote:
> Renesas are expanding their DRIF support and offering,
> I'll be the internal maintainer for DRIF.
>
> Signed-off-by: Fabrizio Castro <fabrizio.castro.jz@renesas.com>
Thank you for volunteering :-)
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
> ---
> MAINTAINERS | 1 +
> 1 file changed, 1 insertion(+)
>
> diff --git a/MAINTAINERS b/MAINTAINERS
> index 26af84f97353..9f49e5ac90d8 100644
> --- a/MAINTAINERS
> +++ b/MAINTAINERS
> @@ -10898,6 +10898,7 @@ F: include/media/drv-intf/renesas-ceu.h
>
> MEDIA DRIVERS FOR RENESAS - DRIF
> M: Ramesh Shanmugasundaram <rashanmu@gmail.com>
> +M: Fabrizio Castro <fabrizio.castro.jz@renesas.com>
> L: linux-media@vger.kernel.org
> L: linux-renesas-soc@vger.kernel.org
> S: Supported
--
Regards,
Laurent Pinchart
^ permalink raw reply [flat|nested] 12+ messages in thread
* Re: [PATCH 2/3] media: dt-bindings: media: renesas,drif: Convert to json-schema
2020-09-15 13:12 ` [PATCH 2/3] media: dt-bindings: media: renesas,drif: Convert to json-schema Fabrizio Castro
2020-09-15 14:12 ` Lad, Prabhakar
@ 2020-09-15 17:36 ` Laurent Pinchart
2020-09-15 17:44 ` Laurent Pinchart
1 sibling, 1 reply; 12+ messages in thread
From: Laurent Pinchart @ 2020-09-15 17:36 UTC (permalink / raw)
To: Fabrizio Castro
Cc: Mauro Carvalho Chehab, Rob Herring, Geert Uytterhoeven,
Ramesh Shanmugasundaram, linux-media, devicetree, linux-kernel,
linux-renesas-soc, Chris Paterson, Biju Das,
Prabhakar Mahadev Lad
Hi Fabrizio,
Thank you for the patch.
On Tue, Sep 15, 2020 at 02:12:15PM +0100, Fabrizio Castro wrote:
> Convert the Renesas DRIF bindings to DT schema and update
> MAINTAINERS accordingly.
>
> Signed-off-by: Fabrizio Castro <fabrizio.castro.jz@renesas.com>
> ---
> .../bindings/media/renesas,drif.txt | 177 ------------
> .../bindings/media/renesas,drif.yaml | 270 ++++++++++++++++++
> MAINTAINERS | 2 +-
> 3 files changed, 271 insertions(+), 178 deletions(-)
> delete mode 100644 Documentation/devicetree/bindings/media/renesas,drif.txt
> create mode 100644 Documentation/devicetree/bindings/media/renesas,drif.yaml
>
> diff --git a/Documentation/devicetree/bindings/media/renesas,drif.txt b/Documentation/devicetree/bindings/media/renesas,drif.txt
> deleted file mode 100644
> index 0d8974aa8b38..000000000000
> --- a/Documentation/devicetree/bindings/media/renesas,drif.txt
> +++ /dev/null
> @@ -1,177 +0,0 @@
> -Renesas R-Car Gen3 Digital Radio Interface controller (DRIF)
> -------------------------------------------------------------
> -
> -R-Car Gen3 DRIF is a SPI like receive only slave device. A general
> -representation of DRIF interfacing with a master device is shown below.
> -
> -+---------------------+ +---------------------+
> -| |-----SCK------->|CLK |
> -| Master |-----SS-------->|SYNC DRIFn (slave) |
> -| |-----SD0------->|D0 |
> -| |-----SD1------->|D1 |
> -+---------------------+ +---------------------+
> -
> -As per datasheet, each DRIF channel (drifn) is made up of two internal
> -channels (drifn0 & drifn1). These two internal channels share the common
> -CLK & SYNC. Each internal channel has its own dedicated resources like
> -irq, dma channels, address space & clock. This internal split is not
> -visible to the external master device.
> -
> -The device tree model represents each internal channel as a separate node.
> -The internal channels sharing the CLK & SYNC are tied together by their
> -phandles using a property called "renesas,bonding". For the rest of
> -the documentation, unless explicitly stated, the word channel implies an
> -internal channel.
> -
> -When both internal channels are enabled they need to be managed together
> -as one (i.e.) they cannot operate alone as independent devices. Out of the
> -two, one of them needs to act as a primary device that accepts common
> -properties of both the internal channels. This channel is identified by a
> -property called "renesas,primary-bond".
> -
> -To summarize,
> - - When both the internal channels that are bonded together are enabled,
> - the zeroth channel is selected as primary-bond. This channels accepts
> - properties common to all the members of the bond.
> - - When only one of the bonded channels need to be enabled, the property
> - "renesas,bonding" or "renesas,primary-bond" will have no effect. That
> - enabled channel can act alone as any other independent device.
> -
> -Required properties of an internal channel:
> --------------------------------------------
> -- compatible: "renesas,r8a7795-drif" if DRIF controller is a part of R8A7795 SoC.
> - "renesas,r8a7796-drif" if DRIF controller is a part of R8A7796 SoC.
> - "renesas,rcar-gen3-drif" for a generic R-Car Gen3 compatible device.
> -
> - When compatible with the generic version, nodes must list the
> - SoC-specific version corresponding to the platform first
> - followed by the generic version.
> -
> -- reg: offset and length of that channel.
> -- interrupts: associated with that channel.
> -- clocks: phandle and clock specifier of that channel.
> -- clock-names: clock input name string: "fck".
> -- dmas: phandles to the DMA channels.
> -- dma-names: names of the DMA channel: "rx".
> -- renesas,bonding: phandle to the other channel.
> -
> -Optional properties of an internal channel:
> --------------------------------------------
> -- power-domains: phandle to the respective power domain.
> -
> -Required properties of an internal channel when:
> - - It is the only enabled channel of the bond (or)
> - - If it acts as primary among enabled bonds
> ---------------------------------------------------------
> -- pinctrl-0: pin control group to be used for this channel.
> -- pinctrl-names: must be "default".
> -- renesas,primary-bond: empty property indicating the channel acts as primary
> - among the bonded channels.
> -- port: child port node corresponding to the data input, in accordance with
> - the video interface bindings defined in
> - Documentation/devicetree/bindings/media/video-interfaces.txt. The port
> - node must contain at least one endpoint.
> -
> -Optional endpoint property:
> ----------------------------
> -- sync-active: Indicates sync signal polarity, 0/1 for low/high respectively.
> - This property maps to SYNCAC bit in the hardware manual. The
> - default is 1 (active high).
> -
> -Example:
> ---------
> -
> -(1) Both internal channels enabled:
> ------------------------------------
> -
> -When interfacing with a third party tuner device with two data pins as shown
> -below.
> -
> -+---------------------+ +---------------------+
> -| |-----SCK------->|CLK |
> -| Master |-----SS-------->|SYNC DRIFn (slave) |
> -| |-----SD0------->|D0 |
> -| |-----SD1------->|D1 |
> -+---------------------+ +---------------------+
> -
> - drif00: rif@e6f40000 {
> - compatible = "renesas,r8a7795-drif",
> - "renesas,rcar-gen3-drif";
> - reg = <0 0xe6f40000 0 0x64>;
> - interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
> - clocks = <&cpg CPG_MOD 515>;
> - clock-names = "fck";
> - dmas = <&dmac1 0x20>, <&dmac2 0x20>;
> - dma-names = "rx", "rx";
> - power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
> - renesas,bonding = <&drif01>;
> - renesas,primary-bond;
> - pinctrl-0 = <&drif0_pins>;
> - pinctrl-names = "default";
> - port {
> - drif0_ep: endpoint {
> - remote-endpoint = <&tuner_ep>;
> - };
> - };
> - };
> -
> - drif01: rif@e6f50000 {
> - compatible = "renesas,r8a7795-drif",
> - "renesas,rcar-gen3-drif";
> - reg = <0 0xe6f50000 0 0x64>;
> - interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
> - clocks = <&cpg CPG_MOD 514>;
> - clock-names = "fck";
> - dmas = <&dmac1 0x22>, <&dmac2 0x22>;
> - dma-names = "rx", "rx";
> - power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
> - renesas,bonding = <&drif00>;
> - };
> -
> -
> -(2) Internal channel 1 alone is enabled:
> -----------------------------------------
> -
> -When interfacing with a third party tuner device with one data pin as shown
> -below.
> -
> -+---------------------+ +---------------------+
> -| |-----SCK------->|CLK |
> -| Master |-----SS-------->|SYNC DRIFn (slave) |
> -| | |D0 (unused) |
> -| |-----SD-------->|D1 |
> -+---------------------+ +---------------------+
> -
> - drif00: rif@e6f40000 {
> - compatible = "renesas,r8a7795-drif",
> - "renesas,rcar-gen3-drif";
> - reg = <0 0xe6f40000 0 0x64>;
> - interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
> - clocks = <&cpg CPG_MOD 515>;
> - clock-names = "fck";
> - dmas = <&dmac1 0x20>, <&dmac2 0x20>;
> - dma-names = "rx", "rx";
> - power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
> - renesas,bonding = <&drif01>;
> - };
> -
> - drif01: rif@e6f50000 {
> - compatible = "renesas,r8a7795-drif",
> - "renesas,rcar-gen3-drif";
> - reg = <0 0xe6f50000 0 0x64>;
> - interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
> - clocks = <&cpg CPG_MOD 514>;
> - clock-names = "fck";
> - dmas = <&dmac1 0x22>, <&dmac2 0x22>;
> - dma-names = "rx", "rx";
> - power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
> - renesas,bonding = <&drif00>;
> - pinctrl-0 = <&drif0_pins>;
> - pinctrl-names = "default";
> - port {
> - drif0_ep: endpoint {
> - remote-endpoint = <&tuner_ep>;
> - sync-active = <0>;
> - };
> - };
> - };
> diff --git a/Documentation/devicetree/bindings/media/renesas,drif.yaml b/Documentation/devicetree/bindings/media/renesas,drif.yaml
> new file mode 100644
> index 000000000000..f57fccc159d6
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/media/renesas,drif.yaml
> @@ -0,0 +1,270 @@
> +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/media/renesas,drif.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Renesas R-Car Gen3 Digital Radio Interface controller (DRIF)
s/controller/Controller/
> +
> +maintainers:
> + - Ramesh Shanmugasundaram <rashanmu@gmail.com>
> + - Fabrizio Castro <fabrizio.castro.jz@renesas.com>
> +
> +description: |
> + R-Car Gen3 DRIF is a SPI like receive only slave device. A general
> + representation of DRIF interfacing with a master device is shown below.
> +
> + +---------------------+ +---------------------+
> + | |-----SCK------->|CLK |
> + | Master |-----SS-------->|SYNC DRIFn (slave) |
> + | |-----SD0------->|D0 |
> + | |-----SD1------->|D1 |
> + +---------------------+ +---------------------+
> +
> + As per datasheet, each DRIF channel (drifn) is made up of two internal
> + channels (drifn0 & drifn1). These two internal channels share the common
> + CLK & SYNC. Each internal channel has its own dedicated resources like
> + irq, dma channels, address space & clock. This internal split is not
> + visible to the external master device.
> +
> + The device tree model represents each internal channel as a separate node.
> + The internal channels sharing the CLK & SYNC are tied together by their
> + phandles using a property called "renesas,bonding". For the rest of
> + the documentation, unless explicitly stated, the word channel implies an
> + internal channel.
> +
> + When both internal channels are enabled they need to be managed together
> + as one (i.e.) they cannot operate alone as independent devices. Out of the
> + two, one of them needs to act as a primary device that accepts common
> + properties of both the internal channels. This channel is identified by a
> + property called "renesas,primary-bond".
> +
> + To summarize,
> + * When both the internal channels that are bonded together are enabled,
> + the zeroth channel is selected as primary-bond. This channels accepts
> + properties common to all the members of the bond.
> + * When only one of the bonded channels need to be enabled, the property
> + "renesas,bonding" or "renesas,primary-bond" will have no effect. That
> + enabled channel can act alone as any other independent device.
> +
> +properties:
> + compatible:
> + items:
> + - enum:
> + - renesas,r8a7795-drif # R-Car H3
> + - renesas,r8a7796-drif # R-Car M3-W
> + - const: renesas,rcar-gen3-drif # Generic R-Car Gen3 compatible device
> +
> + reg:
> + maxItems: 1
> +
> + interrupts:
> + maxItems: 1
> +
> + clocks:
> + maxItems: 1
> +
> + clock-names:
> + maxItems: 1
> + items:
> + - const: fck
> +
> + resets:
> + maxItems: 1
> +
> + dmas:
> + minItems: 1
> + maxItems: 2
> +
> + dma-names:
> + minItems: 1
> + maxItems: 2
> + items:
> + - const: rx
> + - const: rx
> +
> + renesas,bonding:
> + $ref: /schemas/types.yaml#/definitions/phandle
> + description:
> + The phandle to the other internal channel of DRIF
> +
> + power-domains:
> + maxItems: 1
> +
> + pinctrl-0:
> + maxItems: 1
> +
> + pinctrl-names:
> + maxItems: 1
> + items:
> + - const: default
You can drop those three properties, they're already handled by
dt-schema.
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
> +
> + renesas,primary-bond:
> + type: boolean
> + description:
> + Indicates that the channel acts as primary among the bonded channels.
> +
> + port:
> + type: object
> + description:
> + Child port node corresponding to the data input, in accordance with the
> + video interface bindings defined in
> + Documentation/devicetree/bindings/media/video-interfaces.txt.
> + The port node must contain at least one endpoint.
> +
> + properties:
> + endpoint:
> + type: object
> +
> + properties:
> + remote-endpoint:
> + description:
> + A phandle to the remote tuner endpoint subnode in remote node
> + port.
> +
> + sync-active:
> + enum: [0, 1]
> + description:
> + Indicates sync signal polarity, 0/1 for low/high respectively.
> + This property maps to SYNCAC bit in the hardware manual. The
> + default is 1 (active high).
> +
> + additionalProperties: false
> +
> +required:
> + - compatible
> + - reg
> + - interrupts
> + - clocks
> + - clock-names
> + - resets
> + - dmas
> + - dma-names
> + - renesas,bonding
> +
> +if:
> + required:
> + - renesas,primary-bond
> +then:
> + required:
> + - pinctrl-0
> + - pinctrl-names
> + - port
> +
> +additionalProperties: false
> +
> +examples:
> + # Example with both internal channels enabled.
> + #
> + # When interfacing with a third party tuner device with two data pins as shown
> + # below.
> + #
> + # +---------------------+ +---------------------+
> + # | |-----SCK------->|CLK |
> + # | Master |-----SS-------->|SYNC DRIFn (slave) |
> + # | |-----SD0------->|D0 |
> + # | |-----SD1------->|D1 |
> + # +---------------------+ +---------------------+
> + - |
> + #include <dt-bindings/clock/r8a7795-cpg-mssr.h>
> + #include <dt-bindings/interrupt-controller/arm-gic.h>
> + #include <dt-bindings/power/r8a7795-sysc.h>
> +
> + soc {
> + #address-cells = <2>;
> + #size-cells = <2>;
> +
> + drif00: rif@e6f40000 {
> + compatible = "renesas,r8a7795-drif",
> + "renesas,rcar-gen3-drif";
> + reg = <0 0xe6f40000 0 0x64>;
> + interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
> + clocks = <&cpg CPG_MOD 515>;
> + clock-names = "fck";
> + dmas = <&dmac1 0x20>, <&dmac2 0x20>;
> + dma-names = "rx", "rx";
> + power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
> + renesas,bonding = <&drif01>;
> + resets = <&cpg 515>;
> + renesas,primary-bond;
> + pinctrl-0 = <&drif0_pins>;
> + pinctrl-names = "default";
> + port {
> + drif0_ep: endpoint {
> + remote-endpoint = <&tuner_ep>;
> + };
> + };
> + };
> +
> + drif01: rif@e6f50000 {
> + compatible = "renesas,r8a7795-drif",
> + "renesas,rcar-gen3-drif";
> + reg = <0 0xe6f50000 0 0x64>;
> + interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
> + clocks = <&cpg CPG_MOD 514>;
> + clock-names = "fck";
> + dmas = <&dmac1 0x22>, <&dmac2 0x22>;
> + dma-names = "rx", "rx";
> + power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
> + renesas,bonding = <&drif00>;
> + resets = <&cpg 514>;
> + };
> + };
> +
> + # Example with internal channel 1 alone enabled.
> + #
> + # When interfacing with a third party tuner device with one data pin as shown
> + # below.
> + #
> + # +---------------------+ +---------------------+
> + # | |-----SCK------->|CLK |
> + # | Master |-----SS-------->|SYNC DRIFn (slave) |
> + # | | |D0 (unused) |
> + # | |-----SD-------->|D1 |
> + # +---------------------+ +---------------------+
> + - |
> + #include <dt-bindings/clock/r8a7795-cpg-mssr.h>
> + #include <dt-bindings/interrupt-controller/arm-gic.h>
> + #include <dt-bindings/power/r8a7795-sysc.h>
> +
> + soc {
> + #address-cells = <2>;
> + #size-cells = <2>;
> +
> + drif10: rif@e6f60000 {
> + compatible = "renesas,r8a7795-drif",
> + "renesas,rcar-gen3-drif";
> + reg = <0 0xe6f60000 0 0x64>;
> + interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
> + clocks = <&cpg CPG_MOD 513>;
> + clock-names = "fck";
> + dmas = <&dmac1 0x24>, <&dmac2 0x24>;
> + dma-names = "rx", "rx";
> + power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
> + resets = <&cpg 513>;
> + renesas,bonding = <&drif11>;
> + };
> +
> + drif11: rif@e6f70000 {
> + compatible = "renesas,r8a7795-drif",
> + "renesas,rcar-gen3-drif";
> + reg = <0 0xe6f70000 0 0x64>;
> + interrupts = <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>;
> + clocks = <&cpg CPG_MOD 512>;
> + clock-names = "fck";
> + dmas = <&dmac1 0x26>, <&dmac2 0x26>;
> + dma-names = "rx", "rx";
> + power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
> + resets = <&cpg 512>;
> + renesas,bonding = <&drif10>;
> + pinctrl-0 = <&drif1_pins>;
> + pinctrl-names = "default";
> + port {
> + drif1_ep: endpoint {
> + remote-endpoint = <&tuner_ep1>;
> + sync-active = <0>;
> + };
> + };
> + };
> + };
> +...
> diff --git a/MAINTAINERS b/MAINTAINERS
> index 9f49e5ac90d8..3e2a1cad3749 100644
> --- a/MAINTAINERS
> +++ b/MAINTAINERS
> @@ -10903,7 +10903,7 @@ L: linux-media@vger.kernel.org
> L: linux-renesas-soc@vger.kernel.org
> S: Supported
> T: git git://linuxtv.org/media_tree.git
> -F: Documentation/devicetree/bindings/media/renesas,drif.txt
> +F: Documentation/devicetree/bindings/media/renesas,drif.yaml
> F: drivers/media/platform/rcar_drif.c
>
> MEDIA DRIVERS FOR RENESAS - FCP
--
Regards,
Laurent Pinchart
^ permalink raw reply [flat|nested] 12+ messages in thread
* Re: [PATCH 3/3] media: dt-bindings: media: renesas,drif: Add r8a77990 support
2020-09-15 13:12 ` [PATCH 3/3] media: dt-bindings: media: renesas,drif: Add r8a77990 support Fabrizio Castro
2020-09-15 13:31 ` Geert Uytterhoeven
2020-09-15 14:13 ` Lad, Prabhakar
@ 2020-09-15 17:37 ` Laurent Pinchart
2 siblings, 0 replies; 12+ messages in thread
From: Laurent Pinchart @ 2020-09-15 17:37 UTC (permalink / raw)
To: Fabrizio Castro
Cc: Mauro Carvalho Chehab, Rob Herring, Geert Uytterhoeven,
Ramesh Shanmugasundaram, linux-media, devicetree, linux-kernel,
linux-renesas-soc, Chris Paterson, Biju Das,
Prabhakar Mahadev Lad
Hi Fabrizio,
Thank you for the patch.
On Tue, Sep 15, 2020 at 02:12:16PM +0100, Fabrizio Castro wrote:
> The r8a77990 (a.k.a. R-Car E3) device tree schema is
> compatible with R-Car H3 and M3-W schema.
>
> Document r8a77990 support within renesas,drif.yaml.
>
> Signed-off-by: Fabrizio Castro <fabrizio.castro.jz@renesas.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
> ---
> Documentation/devicetree/bindings/media/renesas,drif.yaml | 1 +
> 1 file changed, 1 insertion(+)
>
> diff --git a/Documentation/devicetree/bindings/media/renesas,drif.yaml b/Documentation/devicetree/bindings/media/renesas,drif.yaml
> index f57fccc159d6..051d515be38d 100644
> --- a/Documentation/devicetree/bindings/media/renesas,drif.yaml
> +++ b/Documentation/devicetree/bindings/media/renesas,drif.yaml
> @@ -53,6 +53,7 @@ properties:
> - enum:
> - renesas,r8a7795-drif # R-Car H3
> - renesas,r8a7796-drif # R-Car M3-W
> + - renesas,r8a77990-drif # R-Car E3
> - const: renesas,rcar-gen3-drif # Generic R-Car Gen3 compatible device
>
> reg:
--
Regards,
Laurent Pinchart
^ permalink raw reply [flat|nested] 12+ messages in thread
* Re: [PATCH 2/3] media: dt-bindings: media: renesas,drif: Convert to json-schema
2020-09-15 17:36 ` Laurent Pinchart
@ 2020-09-15 17:44 ` Laurent Pinchart
2020-09-16 10:42 ` Fabrizio Castro
0 siblings, 1 reply; 12+ messages in thread
From: Laurent Pinchart @ 2020-09-15 17:44 UTC (permalink / raw)
To: Fabrizio Castro
Cc: Mauro Carvalho Chehab, Rob Herring, Geert Uytterhoeven,
Ramesh Shanmugasundaram, linux-media, devicetree, linux-kernel,
linux-renesas-soc, Chris Paterson, Biju Das,
Prabhakar Mahadev Lad
On Tue, Sep 15, 2020 at 08:36:39PM +0300, Laurent Pinchart wrote:
> Hi Fabrizio,
>
> Thank you for the patch.
>
> On Tue, Sep 15, 2020 at 02:12:15PM +0100, Fabrizio Castro wrote:
> > Convert the Renesas DRIF bindings to DT schema and update
> > MAINTAINERS accordingly.
> >
> > Signed-off-by: Fabrizio Castro <fabrizio.castro.jz@renesas.com>
> > ---
> > .../bindings/media/renesas,drif.txt | 177 ------------
> > .../bindings/media/renesas,drif.yaml | 270 ++++++++++++++++++
> > MAINTAINERS | 2 +-
> > 3 files changed, 271 insertions(+), 178 deletions(-)
> > delete mode 100644 Documentation/devicetree/bindings/media/renesas,drif.txt
> > create mode 100644 Documentation/devicetree/bindings/media/renesas,drif.yaml
> >
> > diff --git a/Documentation/devicetree/bindings/media/renesas,drif.txt b/Documentation/devicetree/bindings/media/renesas,drif.txt
> > deleted file mode 100644
> > index 0d8974aa8b38..000000000000
> > --- a/Documentation/devicetree/bindings/media/renesas,drif.txt
> > +++ /dev/null
> > @@ -1,177 +0,0 @@
> > -Renesas R-Car Gen3 Digital Radio Interface controller (DRIF)
> > -------------------------------------------------------------
> > -
> > -R-Car Gen3 DRIF is a SPI like receive only slave device. A general
> > -representation of DRIF interfacing with a master device is shown below.
> > -
> > -+---------------------+ +---------------------+
> > -| |-----SCK------->|CLK |
> > -| Master |-----SS-------->|SYNC DRIFn (slave) |
> > -| |-----SD0------->|D0 |
> > -| |-----SD1------->|D1 |
> > -+---------------------+ +---------------------+
> > -
> > -As per datasheet, each DRIF channel (drifn) is made up of two internal
> > -channels (drifn0 & drifn1). These two internal channels share the common
> > -CLK & SYNC. Each internal channel has its own dedicated resources like
> > -irq, dma channels, address space & clock. This internal split is not
> > -visible to the external master device.
> > -
> > -The device tree model represents each internal channel as a separate node.
> > -The internal channels sharing the CLK & SYNC are tied together by their
> > -phandles using a property called "renesas,bonding". For the rest of
> > -the documentation, unless explicitly stated, the word channel implies an
> > -internal channel.
> > -
> > -When both internal channels are enabled they need to be managed together
> > -as one (i.e.) they cannot operate alone as independent devices. Out of the
> > -two, one of them needs to act as a primary device that accepts common
> > -properties of both the internal channels. This channel is identified by a
> > -property called "renesas,primary-bond".
> > -
> > -To summarize,
> > - - When both the internal channels that are bonded together are enabled,
> > - the zeroth channel is selected as primary-bond. This channels accepts
> > - properties common to all the members of the bond.
> > - - When only one of the bonded channels need to be enabled, the property
> > - "renesas,bonding" or "renesas,primary-bond" will have no effect. That
> > - enabled channel can act alone as any other independent device.
> > -
> > -Required properties of an internal channel:
> > --------------------------------------------
> > -- compatible: "renesas,r8a7795-drif" if DRIF controller is a part of R8A7795 SoC.
> > - "renesas,r8a7796-drif" if DRIF controller is a part of R8A7796 SoC.
> > - "renesas,rcar-gen3-drif" for a generic R-Car Gen3 compatible device.
> > -
> > - When compatible with the generic version, nodes must list the
> > - SoC-specific version corresponding to the platform first
> > - followed by the generic version.
> > -
> > -- reg: offset and length of that channel.
> > -- interrupts: associated with that channel.
> > -- clocks: phandle and clock specifier of that channel.
> > -- clock-names: clock input name string: "fck".
> > -- dmas: phandles to the DMA channels.
> > -- dma-names: names of the DMA channel: "rx".
> > -- renesas,bonding: phandle to the other channel.
> > -
> > -Optional properties of an internal channel:
> > --------------------------------------------
> > -- power-domains: phandle to the respective power domain.
> > -
> > -Required properties of an internal channel when:
> > - - It is the only enabled channel of the bond (or)
> > - - If it acts as primary among enabled bonds
> > ---------------------------------------------------------
> > -- pinctrl-0: pin control group to be used for this channel.
> > -- pinctrl-names: must be "default".
> > -- renesas,primary-bond: empty property indicating the channel acts as primary
> > - among the bonded channels.
> > -- port: child port node corresponding to the data input, in accordance with
> > - the video interface bindings defined in
> > - Documentation/devicetree/bindings/media/video-interfaces.txt. The port
> > - node must contain at least one endpoint.
> > -
> > -Optional endpoint property:
> > ----------------------------
> > -- sync-active: Indicates sync signal polarity, 0/1 for low/high respectively.
> > - This property maps to SYNCAC bit in the hardware manual. The
> > - default is 1 (active high).
> > -
> > -Example:
> > ---------
> > -
> > -(1) Both internal channels enabled:
> > ------------------------------------
> > -
> > -When interfacing with a third party tuner device with two data pins as shown
> > -below.
> > -
> > -+---------------------+ +---------------------+
> > -| |-----SCK------->|CLK |
> > -| Master |-----SS-------->|SYNC DRIFn (slave) |
> > -| |-----SD0------->|D0 |
> > -| |-----SD1------->|D1 |
> > -+---------------------+ +---------------------+
> > -
> > - drif00: rif@e6f40000 {
> > - compatible = "renesas,r8a7795-drif",
> > - "renesas,rcar-gen3-drif";
> > - reg = <0 0xe6f40000 0 0x64>;
> > - interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
> > - clocks = <&cpg CPG_MOD 515>;
> > - clock-names = "fck";
> > - dmas = <&dmac1 0x20>, <&dmac2 0x20>;
> > - dma-names = "rx", "rx";
> > - power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
> > - renesas,bonding = <&drif01>;
> > - renesas,primary-bond;
> > - pinctrl-0 = <&drif0_pins>;
> > - pinctrl-names = "default";
> > - port {
> > - drif0_ep: endpoint {
> > - remote-endpoint = <&tuner_ep>;
> > - };
> > - };
> > - };
> > -
> > - drif01: rif@e6f50000 {
> > - compatible = "renesas,r8a7795-drif",
> > - "renesas,rcar-gen3-drif";
> > - reg = <0 0xe6f50000 0 0x64>;
> > - interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
> > - clocks = <&cpg CPG_MOD 514>;
> > - clock-names = "fck";
> > - dmas = <&dmac1 0x22>, <&dmac2 0x22>;
> > - dma-names = "rx", "rx";
> > - power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
> > - renesas,bonding = <&drif00>;
> > - };
> > -
> > -
> > -(2) Internal channel 1 alone is enabled:
> > -----------------------------------------
> > -
> > -When interfacing with a third party tuner device with one data pin as shown
> > -below.
> > -
> > -+---------------------+ +---------------------+
> > -| |-----SCK------->|CLK |
> > -| Master |-----SS-------->|SYNC DRIFn (slave) |
> > -| | |D0 (unused) |
> > -| |-----SD-------->|D1 |
> > -+---------------------+ +---------------------+
> > -
> > - drif00: rif@e6f40000 {
> > - compatible = "renesas,r8a7795-drif",
> > - "renesas,rcar-gen3-drif";
> > - reg = <0 0xe6f40000 0 0x64>;
> > - interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
> > - clocks = <&cpg CPG_MOD 515>;
> > - clock-names = "fck";
> > - dmas = <&dmac1 0x20>, <&dmac2 0x20>;
> > - dma-names = "rx", "rx";
> > - power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
> > - renesas,bonding = <&drif01>;
> > - };
> > -
> > - drif01: rif@e6f50000 {
> > - compatible = "renesas,r8a7795-drif",
> > - "renesas,rcar-gen3-drif";
> > - reg = <0 0xe6f50000 0 0x64>;
> > - interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
> > - clocks = <&cpg CPG_MOD 514>;
> > - clock-names = "fck";
> > - dmas = <&dmac1 0x22>, <&dmac2 0x22>;
> > - dma-names = "rx", "rx";
> > - power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
> > - renesas,bonding = <&drif00>;
> > - pinctrl-0 = <&drif0_pins>;
> > - pinctrl-names = "default";
> > - port {
> > - drif0_ep: endpoint {
> > - remote-endpoint = <&tuner_ep>;
> > - sync-active = <0>;
> > - };
> > - };
> > - };
> > diff --git a/Documentation/devicetree/bindings/media/renesas,drif.yaml b/Documentation/devicetree/bindings/media/renesas,drif.yaml
> > new file mode 100644
> > index 000000000000..f57fccc159d6
> > --- /dev/null
> > +++ b/Documentation/devicetree/bindings/media/renesas,drif.yaml
> > @@ -0,0 +1,270 @@
> > +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
> > +%YAML 1.2
> > +---
> > +$id: http://devicetree.org/schemas/media/renesas,drif.yaml#
> > +$schema: http://devicetree.org/meta-schemas/core.yaml#
> > +
> > +title: Renesas R-Car Gen3 Digital Radio Interface controller (DRIF)
>
> s/controller/Controller/
>
> > +
> > +maintainers:
> > + - Ramesh Shanmugasundaram <rashanmu@gmail.com>
> > + - Fabrizio Castro <fabrizio.castro.jz@renesas.com>
> > +
> > +description: |
> > + R-Car Gen3 DRIF is a SPI like receive only slave device. A general
> > + representation of DRIF interfacing with a master device is shown below.
> > +
> > + +---------------------+ +---------------------+
> > + | |-----SCK------->|CLK |
> > + | Master |-----SS-------->|SYNC DRIFn (slave) |
> > + | |-----SD0------->|D0 |
> > + | |-----SD1------->|D1 |
> > + +---------------------+ +---------------------+
> > +
> > + As per datasheet, each DRIF channel (drifn) is made up of two internal
> > + channels (drifn0 & drifn1). These two internal channels share the common
> > + CLK & SYNC. Each internal channel has its own dedicated resources like
> > + irq, dma channels, address space & clock. This internal split is not
> > + visible to the external master device.
> > +
> > + The device tree model represents each internal channel as a separate node.
> > + The internal channels sharing the CLK & SYNC are tied together by their
> > + phandles using a property called "renesas,bonding". For the rest of
> > + the documentation, unless explicitly stated, the word channel implies an
> > + internal channel.
> > +
> > + When both internal channels are enabled they need to be managed together
> > + as one (i.e.) they cannot operate alone as independent devices. Out of the
> > + two, one of them needs to act as a primary device that accepts common
> > + properties of both the internal channels. This channel is identified by a
> > + property called "renesas,primary-bond".
> > +
> > + To summarize,
> > + * When both the internal channels that are bonded together are enabled,
> > + the zeroth channel is selected as primary-bond. This channels accepts
> > + properties common to all the members of the bond.
> > + * When only one of the bonded channels need to be enabled, the property
> > + "renesas,bonding" or "renesas,primary-bond" will have no effect. That
> > + enabled channel can act alone as any other independent device.
> > +
> > +properties:
> > + compatible:
> > + items:
> > + - enum:
> > + - renesas,r8a7795-drif # R-Car H3
> > + - renesas,r8a7796-drif # R-Car M3-W
> > + - const: renesas,rcar-gen3-drif # Generic R-Car Gen3 compatible device
> > +
> > + reg:
> > + maxItems: 1
> > +
> > + interrupts:
> > + maxItems: 1
> > +
> > + clocks:
> > + maxItems: 1
> > +
> > + clock-names:
> > + maxItems: 1
> > + items:
> > + - const: fck
> > +
> > + resets:
> > + maxItems: 1
> > +
> > + dmas:
> > + minItems: 1
> > + maxItems: 2
> > +
> > + dma-names:
> > + minItems: 1
> > + maxItems: 2
> > + items:
> > + - const: rx
> > + - const: rx
> > +
> > + renesas,bonding:
> > + $ref: /schemas/types.yaml#/definitions/phandle
> > + description:
> > + The phandle to the other internal channel of DRIF
> > +
> > + power-domains:
> > + maxItems: 1
> > +
> > + pinctrl-0:
> > + maxItems: 1
> > +
> > + pinctrl-names:
> > + maxItems: 1
> > + items:
> > + - const: default
>
> You can drop those three properties, they're already handled by
> dt-schema.
It looks like I'm wrong, power-domains seems to be required. I'm not
sure why though, as the power-domain-consumer.yaml schema has select:
true. Maybe Rob can comment on this, in the meantime let's keep the
power-domains property.
> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
>
> > +
> > + renesas,primary-bond:
> > + type: boolean
> > + description:
> > + Indicates that the channel acts as primary among the bonded channels.
> > +
> > + port:
> > + type: object
> > + description:
> > + Child port node corresponding to the data input, in accordance with the
> > + video interface bindings defined in
> > + Documentation/devicetree/bindings/media/video-interfaces.txt.
> > + The port node must contain at least one endpoint.
> > +
> > + properties:
> > + endpoint:
> > + type: object
> > +
> > + properties:
> > + remote-endpoint:
> > + description:
> > + A phandle to the remote tuner endpoint subnode in remote node
> > + port.
> > +
> > + sync-active:
> > + enum: [0, 1]
> > + description:
> > + Indicates sync signal polarity, 0/1 for low/high respectively.
> > + This property maps to SYNCAC bit in the hardware manual. The
> > + default is 1 (active high).
> > +
> > + additionalProperties: false
> > +
> > +required:
> > + - compatible
> > + - reg
> > + - interrupts
> > + - clocks
> > + - clock-names
> > + - resets
> > + - dmas
> > + - dma-names
> > + - renesas,bonding
> > +
> > +if:
> > + required:
> > + - renesas,primary-bond
> > +then:
> > + required:
> > + - pinctrl-0
> > + - pinctrl-names
> > + - port
> > +
> > +additionalProperties: false
> > +
> > +examples:
> > + # Example with both internal channels enabled.
> > + #
> > + # When interfacing with a third party tuner device with two data pins as shown
> > + # below.
> > + #
> > + # +---------------------+ +---------------------+
> > + # | |-----SCK------->|CLK |
> > + # | Master |-----SS-------->|SYNC DRIFn (slave) |
> > + # | |-----SD0------->|D0 |
> > + # | |-----SD1------->|D1 |
> > + # +---------------------+ +---------------------+
> > + - |
> > + #include <dt-bindings/clock/r8a7795-cpg-mssr.h>
> > + #include <dt-bindings/interrupt-controller/arm-gic.h>
> > + #include <dt-bindings/power/r8a7795-sysc.h>
> > +
> > + soc {
> > + #address-cells = <2>;
> > + #size-cells = <2>;
> > +
> > + drif00: rif@e6f40000 {
> > + compatible = "renesas,r8a7795-drif",
> > + "renesas,rcar-gen3-drif";
> > + reg = <0 0xe6f40000 0 0x64>;
> > + interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
> > + clocks = <&cpg CPG_MOD 515>;
> > + clock-names = "fck";
> > + dmas = <&dmac1 0x20>, <&dmac2 0x20>;
> > + dma-names = "rx", "rx";
> > + power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
> > + renesas,bonding = <&drif01>;
> > + resets = <&cpg 515>;
> > + renesas,primary-bond;
> > + pinctrl-0 = <&drif0_pins>;
> > + pinctrl-names = "default";
> > + port {
> > + drif0_ep: endpoint {
> > + remote-endpoint = <&tuner_ep>;
> > + };
> > + };
> > + };
> > +
> > + drif01: rif@e6f50000 {
> > + compatible = "renesas,r8a7795-drif",
> > + "renesas,rcar-gen3-drif";
> > + reg = <0 0xe6f50000 0 0x64>;
> > + interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
> > + clocks = <&cpg CPG_MOD 514>;
> > + clock-names = "fck";
> > + dmas = <&dmac1 0x22>, <&dmac2 0x22>;
> > + dma-names = "rx", "rx";
> > + power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
> > + renesas,bonding = <&drif00>;
> > + resets = <&cpg 514>;
> > + };
> > + };
> > +
> > + # Example with internal channel 1 alone enabled.
> > + #
> > + # When interfacing with a third party tuner device with one data pin as shown
> > + # below.
> > + #
> > + # +---------------------+ +---------------------+
> > + # | |-----SCK------->|CLK |
> > + # | Master |-----SS-------->|SYNC DRIFn (slave) |
> > + # | | |D0 (unused) |
> > + # | |-----SD-------->|D1 |
> > + # +---------------------+ +---------------------+
> > + - |
> > + #include <dt-bindings/clock/r8a7795-cpg-mssr.h>
> > + #include <dt-bindings/interrupt-controller/arm-gic.h>
> > + #include <dt-bindings/power/r8a7795-sysc.h>
> > +
> > + soc {
> > + #address-cells = <2>;
> > + #size-cells = <2>;
> > +
> > + drif10: rif@e6f60000 {
> > + compatible = "renesas,r8a7795-drif",
> > + "renesas,rcar-gen3-drif";
> > + reg = <0 0xe6f60000 0 0x64>;
> > + interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
> > + clocks = <&cpg CPG_MOD 513>;
> > + clock-names = "fck";
> > + dmas = <&dmac1 0x24>, <&dmac2 0x24>;
> > + dma-names = "rx", "rx";
> > + power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
> > + resets = <&cpg 513>;
> > + renesas,bonding = <&drif11>;
> > + };
> > +
> > + drif11: rif@e6f70000 {
> > + compatible = "renesas,r8a7795-drif",
> > + "renesas,rcar-gen3-drif";
> > + reg = <0 0xe6f70000 0 0x64>;
> > + interrupts = <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>;
> > + clocks = <&cpg CPG_MOD 512>;
> > + clock-names = "fck";
> > + dmas = <&dmac1 0x26>, <&dmac2 0x26>;
> > + dma-names = "rx", "rx";
> > + power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
> > + resets = <&cpg 512>;
> > + renesas,bonding = <&drif10>;
> > + pinctrl-0 = <&drif1_pins>;
> > + pinctrl-names = "default";
> > + port {
> > + drif1_ep: endpoint {
> > + remote-endpoint = <&tuner_ep1>;
> > + sync-active = <0>;
> > + };
> > + };
> > + };
> > + };
> > +...
> > diff --git a/MAINTAINERS b/MAINTAINERS
> > index 9f49e5ac90d8..3e2a1cad3749 100644
> > --- a/MAINTAINERS
> > +++ b/MAINTAINERS
> > @@ -10903,7 +10903,7 @@ L: linux-media@vger.kernel.org
> > L: linux-renesas-soc@vger.kernel.org
> > S: Supported
> > T: git git://linuxtv.org/media_tree.git
> > -F: Documentation/devicetree/bindings/media/renesas,drif.txt
> > +F: Documentation/devicetree/bindings/media/renesas,drif.yaml
> > F: drivers/media/platform/rcar_drif.c
> >
> > MEDIA DRIVERS FOR RENESAS - FCP
--
Regards,
Laurent Pinchart
^ permalink raw reply [flat|nested] 12+ messages in thread
* RE: [PATCH 2/3] media: dt-bindings: media: renesas,drif: Convert to json-schema
2020-09-15 17:44 ` Laurent Pinchart
@ 2020-09-16 10:42 ` Fabrizio Castro
0 siblings, 0 replies; 12+ messages in thread
From: Fabrizio Castro @ 2020-09-16 10:42 UTC (permalink / raw)
To: Laurent Pinchart
Cc: Mauro Carvalho Chehab, Rob Herring, Geert Uytterhoeven,
Ramesh Shanmugasundaram, linux-media, devicetree, linux-kernel,
linux-renesas-soc, Chris Paterson, Biju Das,
Prabhakar Mahadev Lad
Hi Laurent,
Thank you for your feedback.
> From: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
> Sent: 15 September 2020 18:45
>
> On Tue, Sep 15, 2020 at 08:36:39PM +0300, Laurent Pinchart wrote:
> > Hi Fabrizio,
> >
> > Thank you for the patch.
> >
> > On Tue, Sep 15, 2020 at 02:12:15PM +0100, Fabrizio Castro wrote:
> > > Convert the Renesas DRIF bindings to DT schema and update
> > > MAINTAINERS accordingly.
> > >
> > > Signed-off-by: Fabrizio Castro <fabrizio.castro.jz@renesas.com>
> > > ---
> > > .../bindings/media/renesas,drif.txt | 177 ------------
> > > .../bindings/media/renesas,drif.yaml | 270 ++++++++++++++++++
> > > MAINTAINERS | 2 +-
> > > 3 files changed, 271 insertions(+), 178 deletions(-)
> > > delete mode 100644
> Documentation/devicetree/bindings/media/renesas,drif.txt
> > > create mode 100644
> Documentation/devicetree/bindings/media/renesas,drif.yaml
> > >
> > > diff --git a/Documentation/devicetree/bindings/media/renesas,drif.txt
> b/Documentation/devicetree/bindings/media/renesas,drif.txt
> > > deleted file mode 100644
> > > index 0d8974aa8b38..000000000000
> > > --- a/Documentation/devicetree/bindings/media/renesas,drif.txt
> > > +++ /dev/null
> > > @@ -1,177 +0,0 @@
> > > -Renesas R-Car Gen3 Digital Radio Interface controller (DRIF)
> > > -------------------------------------------------------------
> > > -
> > > -R-Car Gen3 DRIF is a SPI like receive only slave device. A general
> > > -representation of DRIF interfacing with a master device is shown below.
> > > -
> > > -+---------------------+ +---------------------+
> > > -| |-----SCK------->|CLK |
> > > -| Master |-----SS-------->|SYNC DRIFn (slave) |
> > > -| |-----SD0------->|D0 |
> > > -| |-----SD1------->|D1 |
> > > -+---------------------+ +---------------------+
> > > -
> > > -As per datasheet, each DRIF channel (drifn) is made up of two internal
> > > -channels (drifn0 & drifn1). These two internal channels share the
> common
> > > -CLK & SYNC. Each internal channel has its own dedicated resources like
> > > -irq, dma channels, address space & clock. This internal split is not
> > > -visible to the external master device.
> > > -
> > > -The device tree model represents each internal channel as a separate
> node.
> > > -The internal channels sharing the CLK & SYNC are tied together by their
> > > -phandles using a property called "renesas,bonding". For the rest of
> > > -the documentation, unless explicitly stated, the word channel implies an
> > > -internal channel.
> > > -
> > > -When both internal channels are enabled they need to be managed
> together
> > > -as one (i.e.) they cannot operate alone as independent devices. Out of
> the
> > > -two, one of them needs to act as a primary device that accepts common
> > > -properties of both the internal channels. This channel is identified by a
> > > -property called "renesas,primary-bond".
> > > -
> > > -To summarize,
> > > - - When both the internal channels that are bonded together are
> enabled,
> > > - the zeroth channel is selected as primary-bond. This channels accepts
> > > - properties common to all the members of the bond.
> > > - - When only one of the bonded channels need to be enabled, the
> property
> > > - "renesas,bonding" or "renesas,primary-bond" will have no effect.
> That
> > > - enabled channel can act alone as any other independent device.
> > > -
> > > -Required properties of an internal channel:
> > > --------------------------------------------
> > > -- compatible:"renesas,r8a7795-drif" if DRIF controller is a part of
> R8A7795 SoC.
> > > -"renesas,r8a7796-drif" if DRIF controller is a part of R8A7796
> SoC.
> > > -"renesas,rcar-gen3-drif" for a generic R-Car Gen3 compatible
> device.
> > > -
> > > -When compatible with the generic version, nodes must list
> the
> > > -SoC-specific version corresponding to the platform first
> > > -followed by the generic version.
> > > -
> > > -- reg: offset and length of that channel.
> > > -- interrupts: associated with that channel.
> > > -- clocks: phandle and clock specifier of that channel.
> > > -- clock-names: clock input name string: "fck".
> > > -- dmas: phandles to the DMA channels.
> > > -- dma-names: names of the DMA channel: "rx".
> > > -- renesas,bonding: phandle to the other channel.
> > > -
> > > -Optional properties of an internal channel:
> > > --------------------------------------------
> > > -- power-domains: phandle to the respective power domain.
> > > -
> > > -Required properties of an internal channel when:
> > > -- It is the only enabled channel of the bond (or)
> > > -- If it acts as primary among enabled bonds
> > > ---------------------------------------------------------
> > > -- pinctrl-0: pin control group to be used for this channel.
> > > -- pinctrl-names: must be "default".
> > > -- renesas,primary-bond: empty property indicating the channel acts as
> primary
> > > -among the bonded channels.
> > > -- port: child port node corresponding to the data input, in accordance
> with
> > > -the video interface bindings defined in
> > > -Documentation/devicetree/bindings/media/video-interfaces.txt.
> The port
> > > -node must contain at least one endpoint.
> > > -
> > > -Optional endpoint property:
> > > ----------------------------
> > > -- sync-active: Indicates sync signal polarity, 0/1 for low/high respectively.
> > > - This property maps to SYNCAC bit in the hardware manual. The
> > > - default is 1 (active high).
> > > -
> > > -Example:
> > > ---------
> > > -
> > > -(1) Both internal channels enabled:
> > > ------------------------------------
> > > -
> > > -When interfacing with a third party tuner device with two data pins as
> shown
> > > -below.
> > > -
> > > -+---------------------+ +---------------------+
> > > -| |-----SCK------->|CLK |
> > > -| Master |-----SS-------->|SYNC DRIFn (slave) |
> > > -| |-----SD0------->|D0 |
> > > -| |-----SD1------->|D1 |
> > > -+---------------------+ +---------------------+
> > > -
> > > -drif00: rif@e6f40000 {
> > > -compatible = "renesas,r8a7795-drif",
> > > - "renesas,rcar-gen3-drif";
> > > -reg = <0 0xe6f40000 0 0x64>;
> > > -interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
> > > -clocks = <&cpg CPG_MOD 515>;
> > > -clock-names = "fck";
> > > -dmas = <&dmac1 0x20>, <&dmac2 0x20>;
> > > -dma-names = "rx", "rx";
> > > -power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
> > > -renesas,bonding = <&drif01>;
> > > -renesas,primary-bond;
> > > -pinctrl-0 = <&drif0_pins>;
> > > -pinctrl-names = "default";
> > > -port {
> > > -drif0_ep: endpoint {
> > > - remote-endpoint = <&tuner_ep>;
> > > -};
> > > -};
> > > -};
> > > -
> > > -drif01: rif@e6f50000 {
> > > -compatible = "renesas,r8a7795-drif",
> > > - "renesas,rcar-gen3-drif";
> > > -reg = <0 0xe6f50000 0 0x64>;
> > > -interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
> > > -clocks = <&cpg CPG_MOD 514>;
> > > -clock-names = "fck";
> > > -dmas = <&dmac1 0x22>, <&dmac2 0x22>;
> > > -dma-names = "rx", "rx";
> > > -power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
> > > -renesas,bonding = <&drif00>;
> > > -};
> > > -
> > > -
> > > -(2) Internal channel 1 alone is enabled:
> > > -----------------------------------------
> > > -
> > > -When interfacing with a third party tuner device with one data pin as
> shown
> > > -below.
> > > -
> > > -+---------------------+ +---------------------+
> > > -| |-----SCK------->|CLK |
> > > -| Master |-----SS-------->|SYNC DRIFn (slave) |
> > > -| | |D0 (unused) |
> > > -| |-----SD-------->|D1 |
> > > -+---------------------+ +---------------------+
> > > -
> > > -drif00: rif@e6f40000 {
> > > -compatible = "renesas,r8a7795-drif",
> > > - "renesas,rcar-gen3-drif";
> > > -reg = <0 0xe6f40000 0 0x64>;
> > > -interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
> > > -clocks = <&cpg CPG_MOD 515>;
> > > -clock-names = "fck";
> > > -dmas = <&dmac1 0x20>, <&dmac2 0x20>;
> > > -dma-names = "rx", "rx";
> > > -power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
> > > -renesas,bonding = <&drif01>;
> > > -};
> > > -
> > > -drif01: rif@e6f50000 {
> > > -compatible = "renesas,r8a7795-drif",
> > > - "renesas,rcar-gen3-drif";
> > > -reg = <0 0xe6f50000 0 0x64>;
> > > -interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
> > > -clocks = <&cpg CPG_MOD 514>;
> > > -clock-names = "fck";
> > > -dmas = <&dmac1 0x22>, <&dmac2 0x22>;
> > > -dma-names = "rx", "rx";
> > > -power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
> > > -renesas,bonding = <&drif00>;
> > > -pinctrl-0 = <&drif0_pins>;
> > > -pinctrl-names = "default";
> > > -port {
> > > -drif0_ep: endpoint {
> > > - remote-endpoint = <&tuner_ep>;
> > > - sync-active = <0>;
> > > -};
> > > -};
> > > -};
> > > diff --git a/Documentation/devicetree/bindings/media/renesas,drif.yaml
> b/Documentation/devicetree/bindings/media/renesas,drif.yaml
> > > new file mode 100644
> > > index 000000000000..f57fccc159d6
> > > --- /dev/null
> > > +++ b/Documentation/devicetree/bindings/media/renesas,drif.yaml
> > > @@ -0,0 +1,270 @@
> > > +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
> > > +%YAML 1.2
> > > +---
> > > +$id: http://devicetree.org/schemas/media/renesas,drif.yaml#
> > > +$schema: http://devicetree.org/meta-schemas/core.yaml#
> > > +
> > > +title: Renesas R-Car Gen3 Digital Radio Interface controller (DRIF)
> >
> > s/controller/Controller/
Will fix with V2
> >
> > > +
> > > +maintainers:
> > > + - Ramesh Shanmugasundaram <rashanmu@gmail.com>
> > > + - Fabrizio Castro <fabrizio.castro.jz@renesas.com>
> > > +
> > > +description: |
> > > + R-Car Gen3 DRIF is a SPI like receive only slave device. A general
> > > + representation of DRIF interfacing with a master device is shown
> below.
> > > +
> > > + +---------------------+ +---------------------+
> > > + | |-----SCK------->|CLK |
> > > + | Master |-----SS-------->|SYNC DRIFn (slave) |
> > > + | |-----SD0------->|D0 |
> > > + | |-----SD1------->|D1 |
> > > + +---------------------+ +---------------------+
> > > +
> > > + As per datasheet, each DRIF channel (drifn) is made up of two internal
> > > + channels (drifn0 & drifn1). These two internal channels share the
> common
> > > + CLK & SYNC. Each internal channel has its own dedicated resources like
> > > + irq, dma channels, address space & clock. This internal split is not
> > > + visible to the external master device.
> > > +
> > > + The device tree model represents each internal channel as a separate
> node.
> > > + The internal channels sharing the CLK & SYNC are tied together by their
> > > + phandles using a property called "renesas,bonding". For the rest of
> > > + the documentation, unless explicitly stated, the word channel implies
> an
> > > + internal channel.
> > > +
> > > + When both internal channels are enabled they need to be managed
> together
> > > + as one (i.e.) they cannot operate alone as independent devices. Out of
> the
> > > + two, one of them needs to act as a primary device that accepts
> common
> > > + properties of both the internal channels. This channel is identified by a
> > > + property called "renesas,primary-bond".
> > > +
> > > + To summarize,
> > > + * When both the internal channels that are bonded together are
> enabled,
> > > + the zeroth channel is selected as primary-bond. This channels
> accepts
> > > + properties common to all the members of the bond.
> > > + * When only one of the bonded channels need to be enabled, the
> property
> > > + "renesas,bonding" or "renesas,primary-bond" will have no effect.
> That
> > > + enabled channel can act alone as any other independent device.
> > > +
> > > +properties:
> > > + compatible:
> > > + items:
> > > + - enum:
> > > + - renesas,r8a7795-drif # R-Car H3
> > > + - renesas,r8a7796-drif # R-Car M3-W
> > > + - const: renesas,rcar-gen3-drif # Generic R-Car Gen3 compatible
> device
> > > +
> > > + reg:
> > > + maxItems: 1
> > > +
> > > + interrupts:
> > > + maxItems: 1
> > > +
> > > + clocks:
> > > + maxItems: 1
> > > +
> > > + clock-names:
> > > + maxItems: 1
> > > + items:
> > > + - const: fck
> > > +
> > > + resets:
> > > + maxItems: 1
> > > +
> > > + dmas:
> > > + minItems: 1
> > > + maxItems: 2
> > > +
> > > + dma-names:
> > > + minItems: 1
> > > + maxItems: 2
> > > + items:
> > > + - const: rx
> > > + - const: rx
> > > +
> > > + renesas,bonding:
> > > + $ref: /schemas/types.yaml#/definitions/phandle
> > > + description:
> > > + The phandle to the other internal channel of DRIF
> > > +
> > > + power-domains:
> > > + maxItems: 1
> > > +
> > > + pinctrl-0:
> > > + maxItems: 1
> > > +
> > > + pinctrl-names:
> > > + maxItems: 1
> > > + items:
> > > + - const: default
> >
> > You can drop those three properties, they're already handled by
> > dt-schema.
>
> It looks like I'm wrong, power-domains seems to be required. I'm not
> sure why though, as the power-domain-consumer.yaml schema has select:
> true. Maybe Rob can comment on this, in the meantime let's keep the
> power-domains property.
Ok, will leave it for v2, and wait for Rob's reply.
Thanks,
Fab
>
> > Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
> >
> > > +
> > > + renesas,primary-bond:
> > > + type: boolean
> > > + description:
> > > + Indicates that the channel acts as primary among the bonded
> channels.
> > > +
> > > + port:
> > > + type: object
> > > + description:
> > > + Child port node corresponding to the data input, in accordance with
> the
> > > + video interface bindings defined in
> > > + Documentation/devicetree/bindings/media/video-interfaces.txt.
> > > + The port node must contain at least one endpoint.
> > > +
> > > + properties:
> > > + endpoint:
> > > + type: object
> > > +
> > > + properties:
> > > + remote-endpoint:
> > > + description:
> > > + A phandle to the remote tuner endpoint subnode in remote
> node
> > > + port.
> > > +
> > > + sync-active:
> > > + enum: [0, 1]
> > > + description:
> > > + Indicates sync signal polarity, 0/1 for low/high respectively.
> > > + This property maps to SYNCAC bit in the hardware manual. The
> > > + default is 1 (active high).
> > > +
> > > + additionalProperties: false
> > > +
> > > +required:
> > > + - compatible
> > > + - reg
> > > + - interrupts
> > > + - clocks
> > > + - clock-names
> > > + - resets
> > > + - dmas
> > > + - dma-names
> > > + - renesas,bonding
> > > +
> > > +if:
> > > + required:
> > > + - renesas,primary-bond
> > > +then:
> > > + required:
> > > + - pinctrl-0
> > > + - pinctrl-names
> > > + - port
> > > +
> > > +additionalProperties: false
> > > +
> > > +examples:
> > > + # Example with both internal channels enabled.
> > > + #
> > > + # When interfacing with a third party tuner device with two data pins as
> shown
> > > + # below.
> > > + #
> > > + # +---------------------+ +---------------------+
> > > + # | |-----SCK------->|CLK |
> > > + # | Master |-----SS-------->|SYNC DRIFn (slave) |
> > > + # | |-----SD0------->|D0 |
> > > + # | |-----SD1------->|D1 |
> > > + # +---------------------+ +---------------------+
> > > + - |
> > > + #include <dt-bindings/clock/r8a7795-cpg-mssr.h>
> > > + #include <dt-bindings/interrupt-controller/arm-gic.h>
> > > + #include <dt-bindings/power/r8a7795-sysc.h>
> > > +
> > > + soc {
> > > + #address-cells = <2>;
> > > + #size-cells = <2>;
> > > +
> > > + drif00: rif@e6f40000 {
> > > + compatible = "renesas,r8a7795-drif",
> > > + "renesas,rcar-gen3-drif";
> > > + reg = <0 0xe6f40000 0 0x64>;
> > > + interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
> > > + clocks = <&cpg CPG_MOD 515>;
> > > + clock-names = "fck";
> > > + dmas = <&dmac1 0x20>, <&dmac2 0x20>;
> > > + dma-names = "rx", "rx";
> > > + power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
> > > + renesas,bonding = <&drif01>;
> > > + resets = <&cpg 515>;
> > > + renesas,primary-bond;
> > > + pinctrl-0 = <&drif0_pins>;
> > > + pinctrl-names = "default";
> > > + port {
> > > + drif0_ep: endpoint {
> > > + remote-endpoint = <&tuner_ep>;
> > > + };
> > > + };
> > > + };
> > > +
> > > + drif01: rif@e6f50000 {
> > > + compatible = "renesas,r8a7795-drif",
> > > + "renesas,rcar-gen3-drif";
> > > + reg = <0 0xe6f50000 0 0x64>;
> > > + interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
> > > + clocks = <&cpg CPG_MOD 514>;
> > > + clock-names = "fck";
> > > + dmas = <&dmac1 0x22>, <&dmac2 0x22>;
> > > + dma-names = "rx", "rx";
> > > + power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
> > > + renesas,bonding = <&drif00>;
> > > + resets = <&cpg 514>;
> > > + };
> > > + };
> > > +
> > > + # Example with internal channel 1 alone enabled.
> > > + #
> > > + # When interfacing with a third party tuner device with one data pin as
> shown
> > > + # below.
> > > + #
> > > + # +---------------------+ +---------------------+
> > > + # | |-----SCK------->|CLK |
> > > + # | Master |-----SS-------->|SYNC DRIFn (slave) |
> > > + # | | |D0 (unused) |
> > > + # | |-----SD-------->|D1 |
> > > + # +---------------------+ +---------------------+
> > > + - |
> > > + #include <dt-bindings/clock/r8a7795-cpg-mssr.h>
> > > + #include <dt-bindings/interrupt-controller/arm-gic.h>
> > > + #include <dt-bindings/power/r8a7795-sysc.h>
> > > +
> > > + soc {
> > > + #address-cells = <2>;
> > > + #size-cells = <2>;
> > > +
> > > + drif10: rif@e6f60000 {
> > > + compatible = "renesas,r8a7795-drif",
> > > + "renesas,rcar-gen3-drif";
> > > + reg = <0 0xe6f60000 0 0x64>;
> > > + interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
> > > + clocks = <&cpg CPG_MOD 513>;
> > > + clock-names = "fck";
> > > + dmas = <&dmac1 0x24>, <&dmac2 0x24>;
> > > + dma-names = "rx", "rx";
> > > + power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
> > > + resets = <&cpg 513>;
> > > + renesas,bonding = <&drif11>;
> > > + };
> > > +
> > > + drif11: rif@e6f70000 {
> > > + compatible = "renesas,r8a7795-drif",
> > > + "renesas,rcar-gen3-drif";
> > > + reg = <0 0xe6f70000 0 0x64>;
> > > + interrupts = <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>;
> > > + clocks = <&cpg CPG_MOD 512>;
> > > + clock-names = "fck";
> > > + dmas = <&dmac1 0x26>, <&dmac2 0x26>;
> > > + dma-names = "rx", "rx";
> > > + power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
> > > + resets = <&cpg 512>;
> > > + renesas,bonding = <&drif10>;
> > > + pinctrl-0 = <&drif1_pins>;
> > > + pinctrl-names = "default";
> > > + port {
> > > + drif1_ep: endpoint {
> > > + remote-endpoint = <&tuner_ep1>;
> > > + sync-active = <0>;
> > > + };
> > > + };
> > > + };
> > > + };
> > > +...
> > > diff --git a/MAINTAINERS b/MAINTAINERS
> > > index 9f49e5ac90d8..3e2a1cad3749 100644
> > > --- a/MAINTAINERS
> > > +++ b/MAINTAINERS
> > > @@ -10903,7 +10903,7 @@ L:linux-media@vger.kernel.org
> > > L:linux-renesas-soc@vger.kernel.org
> > > S:Supported
> > > T:git git://linuxtv.org/media_tree.git
> > > -F:Documentation/devicetree/bindings/media/renesas,drif.txt
> > > +F:Documentation/devicetree/bindings/media/renesas,drif.yaml
> > > F:drivers/media/platform/rcar_drif.c
> > >
> > > MEDIA DRIVERS FOR RENESAS - FCP
>
> --
> Regards,
>
> Laurent Pinchart
Renesas Electronics Europe GmbH, Geschaeftsfuehrer/President: Carsten Jauch, Sitz der Gesellschaft/Registered office: Duesseldorf, Arcadiastrasse 10, 40472 Duesseldorf, Germany, Handelsregister/Commercial Register: Duesseldorf, HRB 3708 USt-IDNr./Tax identification no.: DE 119353406 WEEE-Reg.-Nr./WEEE reg. no.: DE 14978647
^ permalink raw reply [flat|nested] 12+ messages in thread
end of thread, other threads:[~2020-09-16 18:55 UTC | newest]
Thread overview: 12+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2020-09-15 13:12 [PATCH 0/3] Document r8a77990 DRIF support Fabrizio Castro
2020-09-15 13:12 ` [PATCH 1/3] MAINTAINERS: Add Fabrizio Castro to Renesas DRIF Fabrizio Castro
2020-09-15 16:11 ` Laurent Pinchart
2020-09-15 13:12 ` [PATCH 2/3] media: dt-bindings: media: renesas,drif: Convert to json-schema Fabrizio Castro
2020-09-15 14:12 ` Lad, Prabhakar
2020-09-15 17:36 ` Laurent Pinchart
2020-09-15 17:44 ` Laurent Pinchart
2020-09-16 10:42 ` Fabrizio Castro
2020-09-15 13:12 ` [PATCH 3/3] media: dt-bindings: media: renesas,drif: Add r8a77990 support Fabrizio Castro
2020-09-15 13:31 ` Geert Uytterhoeven
2020-09-15 14:13 ` Lad, Prabhakar
2020-09-15 17:37 ` Laurent Pinchart
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.