[dpdk-dev] [RFC PATCH 5/5] build: replace use of old build macros

[Bruce Richardson <bruce.richardson@intel.com>]

Use the newer macros defined by meson in all DPDK source code, to ensure
there are no errors when the old non-standard macros are removed.

Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
---
NOTE: this patch is not suitable for backporting, but a new patch for this
issue can be done for older releases if the other patches on this set are
accepted and backported.
---
 app/test-pmd/cmdline.c    |  8 ++++----
 app/test-pmd/parameters.c | 12 ++++++------
 app/test-pmd/testpmd.c    | 24 ++++++++++++------------
 app/test-pmd/testpmd.h    |  4 ++--
 app/test/test_eal_flags.c |  4 ++--
 5 files changed, 26 insertions(+), 26 deletions(-)

diff --git a/app/test-pmd/cmdline.c b/app/test-pmd/cmdline.c
index 0a6ed85f33..9ca052a1b9 100644
--- a/app/test-pmd/cmdline.c
+++ b/app/test-pmd/cmdline.c
@@ -50,7 +50,7 @@
 #include <cmdline_parse_etheraddr.h>
 #include <cmdline_socket.h>
 #include <cmdline.h>
-#ifdef RTE_LIBRTE_PMD_BOND
+#ifdef RTE_LIBRTE_BOND_PMD
 #include <rte_eth_bond.h>
 #include <rte_eth_bond_8023ad.h>
 #endif
@@ -597,7 +597,7 @@ static void cmd_help_long_parsed(void *parsed_result,
 			"   Show the bypass configuration for a bypass enabled NIC"
 			" using the lowest port on the NIC.\n\n"
 
-#ifdef RTE_LIBRTE_PMD_BOND
+#ifdef RTE_LIBRTE_BOND_PMD
 			"create bonded device (mode) (socket)\n"
 			"	Create a new bonded device with specific bonding mode and socket.\n\n"
 
@@ -5732,7 +5732,7 @@ cmdline_parse_inst_t cmd_show_bypass_config = {
 	},
 };
 
-#ifdef RTE_LIBRTE_PMD_BOND
+#ifdef RTE_LIBRTE_BOND_PMD
 /* *** SET BONDING MODE *** */
 struct cmd_set_bonding_mode_result {
 	cmdline_fixed_string_t set;
@@ -19430,7 +19430,7 @@ cmdline_parse_ctx_t main_ctx[] = {
 	(cmdline_parse_inst_t *)&cmd_set_bypass_event,
 	(cmdline_parse_inst_t *)&cmd_set_bypass_timeout,
 	(cmdline_parse_inst_t *)&cmd_show_bypass_config,
-#ifdef RTE_LIBRTE_PMD_BOND
+#ifdef RTE_LIBRTE_BOND_PMD
 	(cmdline_parse_inst_t *) &cmd_set_bonding_mode,
 	(cmdline_parse_inst_t *) &cmd_show_bonding_config,
 	(cmdline_parse_inst_t *) &cmd_set_bonding_primary,
diff --git a/app/test-pmd/parameters.c b/app/test-pmd/parameters.c
index 7cb0e3d6ec..4f6f6a34f1 100644
--- a/app/test-pmd/parameters.c
+++ b/app/test-pmd/parameters.c
@@ -39,7 +39,7 @@
 #include <rte_ether.h>
 #include <rte_ethdev.h>
 #include <rte_string_fns.h>
-#ifdef RTE_LIBRTE_PMD_BOND
+#ifdef RTE_LIBRTE_BOND_PMD
 #include <rte_eth_bond.h>
 #endif
 #include <rte_flow.h>
@@ -128,7 +128,7 @@ usage(char* progname)
 	       "the packet will be enqueued into the rx drop-queue. "
 	       "If the drop-queue doesn't exist, the packet is dropped. "
 	       "By default drop-queue=127.\n");
-#ifdef RTE_LIBRTE_LATENCY_STATS
+#ifdef RTE_LIBRTE_LATENCYSTATS
 	printf("  --latencystats=N: enable latency and jitter statistcs "
 	       "monitoring on forwarding lcore id N.\n");
 #endif
@@ -610,10 +610,10 @@ launch_args_parse(int argc, char** argv)
 		{ "pkt-filter-report-hash",     1, 0, 0 },
 		{ "pkt-filter-size",            1, 0, 0 },
 		{ "pkt-filter-drop-queue",      1, 0, 0 },
-#ifdef RTE_LIBRTE_LATENCY_STATS
+#ifdef RTE_LIBRTE_LATENCYSTATS
 		{ "latencystats",               1, 0, 0 },
 #endif
-#ifdef RTE_LIBRTE_BITRATE
+#ifdef RTE_LIBRTE_BITRATESTATS
 		{ "bitrate-stats",              1, 0, 0 },
 #endif
 		{ "disable-crc-strip",          0, 0, 0 },
@@ -973,7 +973,7 @@ launch_args_parse(int argc, char** argv)
 						 "drop queue %d invalid - must"
 						 "be >= 0 \n", n);
 			}
-#ifdef RTE_LIBRTE_LATENCY_STATS
+#ifdef RTE_LIBRTE_LATENCYSTATS
 			if (!strcmp(lgopts[opt_idx].name,
 				    "latencystats")) {
 				n = atoi(optarg);
@@ -986,7 +986,7 @@ launch_args_parse(int argc, char** argv)
 						 " must be >= 0\n", n);
 			}
 #endif
-#ifdef RTE_LIBRTE_BITRATE
+#ifdef RTE_LIBRTE_BITRATESTATS
 			if (!strcmp(lgopts[opt_idx].name, "bitrate-stats")) {
 				n = atoi(optarg);
 				if (n >= 0) {
diff --git a/app/test-pmd/testpmd.c b/app/test-pmd/testpmd.c
index 7842c3b781..68a6c979b6 100644
--- a/app/test-pmd/testpmd.c
+++ b/app/test-pmd/testpmd.c
@@ -54,10 +54,10 @@
 #endif
 #include <rte_flow.h>
 #include <rte_metrics.h>
-#ifdef RTE_LIBRTE_BITRATE
+#ifdef RTE_LIBRTE_BITRATESTATS
 #include <rte_bitrate.h>
 #endif
-#ifdef RTE_LIBRTE_LATENCY_STATS
+#ifdef RTE_LIBRTE_LATENCYSTATS
 #include <rte_latencystats.h>
 #endif
 
@@ -410,7 +410,7 @@ uint32_t bypass_timeout = RTE_PMD_IXGBE_BYPASS_TMT_OFF;
 #endif
 
 
-#ifdef RTE_LIBRTE_LATENCY_STATS
+#ifdef RTE_LIBRTE_LATENCYSTATS
 
 /*
  * Set when latency stats is enabled in the commandline
@@ -478,7 +478,7 @@ uint8_t xstats_hide_zero;
 unsigned int num_sockets = 0;
 unsigned int socket_ids[RTE_MAX_NUMA_NODES];
 
-#ifdef RTE_LIBRTE_BITRATE
+#ifdef RTE_LIBRTE_BITRATESTATS
 /* Bitrate statistics */
 struct rte_stats_bitrates *bitrate_data;
 lcoreid_t bitrate_lcore_id;
@@ -2063,7 +2063,7 @@ run_pkt_fwd_on_lcore(struct fwd_lcore *fc, packet_fwd_t pkt_fwd)
 	struct fwd_stream **fsm;
 	streamid_t nb_fs;
 	streamid_t sm_id;
-#ifdef RTE_LIBRTE_BITRATE
+#ifdef RTE_LIBRTE_BITRATESTATS
 	uint64_t tics_per_1sec;
 	uint64_t tics_datum;
 	uint64_t tics_current;
@@ -2078,7 +2078,7 @@ run_pkt_fwd_on_lcore(struct fwd_lcore *fc, packet_fwd_t pkt_fwd)
 	do {
 		for (sm_id = 0; sm_id < nb_fs; sm_id++)
 			(*pkt_fwd)(fsm[sm_id]);
-#ifdef RTE_LIBRTE_BITRATE
+#ifdef RTE_LIBRTE_BITRATESTATS
 		if (bitrate_enabled != 0 &&
 				bitrate_lcore_id == rte_lcore_id()) {
 			tics_current = rte_rdtsc();
@@ -2091,7 +2091,7 @@ run_pkt_fwd_on_lcore(struct fwd_lcore *fc, packet_fwd_t pkt_fwd)
 			}
 		}
 #endif
-#ifdef RTE_LIBRTE_LATENCY_STATS
+#ifdef RTE_LIBRTE_LATENCYSTATS
 		if (latencystats_enabled != 0 &&
 				latencystats_lcore_id == rte_lcore_id())
 			rte_latencystats_update();
@@ -3641,7 +3641,7 @@ signal_handler(int signum)
 		/* uninitialize packet capture framework */
 		rte_pdump_uninit();
 #endif
-#ifdef RTE_LIBRTE_LATENCY_STATS
+#ifdef RTE_LIBRTE_LATENCYSTATS
 		if (latencystats_enabled != 0)
 			rte_latencystats_uninit();
 #endif
@@ -3706,10 +3706,10 @@ main(int argc, char** argv)
 			 "Check the core mask argument\n");
 
 	/* Bitrate/latency stats disabled by default */
-#ifdef RTE_LIBRTE_BITRATE
+#ifdef RTE_LIBRTE_BITRATESTATS
 	bitrate_enabled = 0;
 #endif
-#ifdef RTE_LIBRTE_LATENCY_STATS
+#ifdef RTE_LIBRTE_LATENCYSTATS
 	latencystats_enabled = 0;
 #endif
 
@@ -3788,7 +3788,7 @@ main(int argc, char** argv)
 	/* Init metrics library */
 	rte_metrics_init(rte_socket_id());
 
-#ifdef RTE_LIBRTE_LATENCY_STATS
+#ifdef RTE_LIBRTE_LATENCYSTATS
 	if (latencystats_enabled != 0) {
 		int ret = rte_latencystats_init(1, NULL);
 		if (ret)
@@ -3800,7 +3800,7 @@ main(int argc, char** argv)
 #endif
 
 	/* Setup bitrate stats */
-#ifdef RTE_LIBRTE_BITRATE
+#ifdef RTE_LIBRTE_BITRATESTATS
 	if (bitrate_enabled != 0) {
 		bitrate_data = rte_stats_bitrate_create();
 		if (bitrate_data == NULL)
diff --git a/app/test-pmd/testpmd.h b/app/test-pmd/testpmd.h
index 25a12b14f2..54d616ca75 100644
--- a/app/test-pmd/testpmd.h
+++ b/app/test-pmd/testpmd.h
@@ -402,12 +402,12 @@ extern uint32_t param_total_num_mbufs;
 
 extern uint16_t stats_period;
 
-#ifdef RTE_LIBRTE_LATENCY_STATS
+#ifdef RTE_LIBRTE_LATENCYSTATS
 extern uint8_t latencystats_enabled;
 extern lcoreid_t latencystats_lcore_id;
 #endif
 
-#ifdef RTE_LIBRTE_BITRATE
+#ifdef RTE_LIBRTE_BITRATESTATS
 extern lcoreid_t bitrate_lcore_id;
 extern uint8_t bitrate_enabled;
 #endif
diff --git a/app/test/test_eal_flags.c b/app/test/test_eal_flags.c
index b019656b29..867b91bc24 100644
--- a/app/test/test_eal_flags.c
+++ b/app/test/test_eal_flags.c
@@ -344,7 +344,7 @@ test_invalid_b_flag(void)
 static int
 test_invalid_vdev_flag(void)
 {
-#ifdef RTE_LIBRTE_PMD_RING
+#ifdef RTE_LIBRTE_RING_PMD
 #ifdef RTE_EXEC_ENV_FREEBSD
 	/* BSD target doesn't support prefixes at this point, and we also need to
 	 * run another primary process here */
@@ -1504,7 +1504,7 @@ test_eal_flags(void)
 		return ret;
 	}
 
-#ifdef RTE_LIBRTE_PMD_RING
+#ifdef RTE_LIBRTE_RING_PMD
 	ret = test_invalid_vdev_flag();
 	if (ret < 0) {
 		printf("Error in test_invalid_vdev_flag()\n");
-- 
2.25.1