All of lore.kernel.org
 help / color / mirror / Atom feed
From: Alex Elder <elder@linaro.org>
To: davem@davemloft.net, kuba@kernel.org
Cc: evgreen@chromium.org, subashab@codeaurora.org,
	cpratapa@codeaurora.org, bjorn.andersson@linaro.org,
	netdev@vger.kernel.org, linux-kernel@vger.kernel.org
Subject: [PATCH net-next v3 4/7] net: ipa: use device_init_wakeup()
Date: Thu, 17 Sep 2020 12:39:23 -0500	[thread overview]
Message-ID: <20200917173926.24266-5-elder@linaro.org> (raw)
In-Reply-To: <20200917173926.24266-1-elder@linaro.org>

The call to wakeup_source_register() in ipa_probe() does not do what
it was intended to do.  Call device_init_wakeup() in ipa_setup()
instead, to set the IPA device as wakeup-capable and to initially
enable wakeup capability.

When we receive a SUSPEND interrupt, call pm_wakeup_dev_event()
with a zero processing time, to simply call for a resume without
any other processing.  The ipa_resume() call will take care of
waking things up again, and will handle receiving the packet.

Note that this gets rid of a clock reference counting bug that
occurred when handling an IPA SUSPEND interrupt.  Specifically,
ipa_suspend_handler() took an IPA clock reference *in addition*
to the one taken by ipa_resume().  There is no need to back-port
this fix however, because it only affects code that was not
previously working (this patch is part of fixing that).

Signed-off-by: Alex Elder <elder@linaro.org>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
---
v3: Added Bjorn's reviewed-by tag.

 drivers/net/ipa/ipa.h      |  2 --
 drivers/net/ipa/ipa_main.c | 42 ++++++++++++++++----------------------
 2 files changed, 18 insertions(+), 26 deletions(-)

diff --git a/drivers/net/ipa/ipa.h b/drivers/net/ipa/ipa.h
index e02fe979b645b..c688155ccf375 100644
--- a/drivers/net/ipa/ipa.h
+++ b/drivers/net/ipa/ipa.h
@@ -114,8 +114,6 @@ struct ipa {
 	void *zero_virt;
 	size_t zero_size;
 
-	struct wakeup_source *wakeup_source;
-
 	/* Bit masks indicating endpoint state */
 	u32 available;		/* supported by hardware */
 	u32 filter_map;
diff --git a/drivers/net/ipa/ipa_main.c b/drivers/net/ipa/ipa_main.c
index 4d5394bcfe47e..4e2508bb1bf80 100644
--- a/drivers/net/ipa/ipa_main.c
+++ b/drivers/net/ipa/ipa_main.c
@@ -75,17 +75,19 @@
  * @ipa:	IPA pointer
  * @irq_id:	IPA interrupt type (unused)
  *
- * When in suspended state, the IPA can trigger a resume by sending a SUSPEND
- * IPA interrupt.
+ * If an RX endpoint is in suspend state, and the IPA has a packet
+ * destined for that endpoint, the IPA generates a SUSPEND interrupt
+ * to inform the AP that it should resume the endpoint.  If we get
+ * one of these interrupts we just resume everything.
  */
 static void ipa_suspend_handler(struct ipa *ipa, enum ipa_irq_id irq_id)
 {
-	/* Take a a single clock reference to prevent suspend.  All
-	 * endpoints will be resumed as a result.  This reference will
-	 * be dropped when we get a power management suspend request.
+	/* Just report the event, and let system resume handle the rest.
+	 * More than one endpoint could signal this; if so, ignore
+	 * all but the first.
 	 */
 	if (!test_and_set_bit(IPA_FLAG_CLOCK_HELD, ipa->flags))
-		ipa_clock_get(ipa);
+		pm_wakeup_dev_event(&ipa->pdev->dev, 0, true);
 
 	/* Acknowledge/clear the suspend interrupt on all endpoints */
 	ipa_interrupt_suspend_clear_all(ipa->interrupt);
@@ -106,6 +108,7 @@ int ipa_setup(struct ipa *ipa)
 {
 	struct ipa_endpoint *exception_endpoint;
 	struct ipa_endpoint *command_endpoint;
+	struct device *dev = &ipa->pdev->dev;
 	int ret;
 
 	/* Setup for IPA v3.5.1 has some slight differences */
@@ -123,6 +126,10 @@ int ipa_setup(struct ipa *ipa)
 
 	ipa_uc_setup(ipa);
 
+	ret = device_init_wakeup(dev, true);
+	if (ret)
+		goto err_uc_teardown;
+
 	ipa_endpoint_setup(ipa);
 
 	/* We need to use the AP command TX endpoint to perform other
@@ -158,7 +165,7 @@ int ipa_setup(struct ipa *ipa)
 
 	ipa->setup_complete = true;
 
-	dev_info(&ipa->pdev->dev, "IPA driver setup completed successfully\n");
+	dev_info(dev, "IPA driver setup completed successfully\n");
 
 	return 0;
 
@@ -173,6 +180,8 @@ int ipa_setup(struct ipa *ipa)
 	ipa_endpoint_disable_one(command_endpoint);
 err_endpoint_teardown:
 	ipa_endpoint_teardown(ipa);
+	(void)device_init_wakeup(dev, false);
+err_uc_teardown:
 	ipa_uc_teardown(ipa);
 	ipa_interrupt_remove(ipa->interrupt, IPA_IRQ_TX_SUSPEND);
 	ipa_interrupt_teardown(ipa->interrupt);
@@ -200,6 +209,7 @@ static void ipa_teardown(struct ipa *ipa)
 	command_endpoint = ipa->name_map[IPA_ENDPOINT_AP_COMMAND_TX];
 	ipa_endpoint_disable_one(command_endpoint);
 	ipa_endpoint_teardown(ipa);
+	(void)device_init_wakeup(&ipa->pdev->dev, false);
 	ipa_uc_teardown(ipa);
 	ipa_interrupt_remove(ipa->interrupt, IPA_IRQ_TX_SUSPEND);
 	ipa_interrupt_teardown(ipa->interrupt);
@@ -709,7 +719,6 @@ static void ipa_validate_build(void)
  */
 static int ipa_probe(struct platform_device *pdev)
 {
-	struct wakeup_source *wakeup_source;
 	struct device *dev = &pdev->dev;
 	const struct ipa_data *data;
 	struct ipa_clock *clock;
@@ -758,19 +767,11 @@ static int ipa_probe(struct platform_device *pdev)
 		goto err_clock_exit;
 	}
 
-	/* Create a wakeup source. */
-	wakeup_source = wakeup_source_register(dev, "ipa");
-	if (!wakeup_source) {
-		/* The most likely reason for failure is memory exhaustion */
-		ret = -ENOMEM;
-		goto err_clock_exit;
-	}
-
 	/* Allocate and initialize the IPA structure */
 	ipa = kzalloc(sizeof(*ipa), GFP_KERNEL);
 	if (!ipa) {
 		ret = -ENOMEM;
-		goto err_wakeup_source_unregister;
+		goto err_clock_exit;
 	}
 
 	ipa->pdev = pdev;
@@ -778,7 +779,6 @@ static int ipa_probe(struct platform_device *pdev)
 	ipa->modem_rproc = rproc;
 	ipa->clock = clock;
 	__clear_bit(IPA_FLAG_CLOCK_HELD, ipa->flags);
-	ipa->wakeup_source = wakeup_source;
 	ipa->version = data->version;
 
 	ret = ipa_reg_init(ipa);
@@ -857,8 +857,6 @@ static int ipa_probe(struct platform_device *pdev)
 	ipa_reg_exit(ipa);
 err_kfree_ipa:
 	kfree(ipa);
-err_wakeup_source_unregister:
-	wakeup_source_unregister(wakeup_source);
 err_clock_exit:
 	ipa_clock_exit(clock);
 err_rproc_put:
@@ -872,11 +870,8 @@ static int ipa_remove(struct platform_device *pdev)
 	struct ipa *ipa = dev_get_drvdata(&pdev->dev);
 	struct rproc *rproc = ipa->modem_rproc;
 	struct ipa_clock *clock = ipa->clock;
-	struct wakeup_source *wakeup_source;
 	int ret;
 
-	wakeup_source = ipa->wakeup_source;
-
 	if (ipa->setup_complete) {
 		ret = ipa_modem_stop(ipa);
 		if (ret)
@@ -893,7 +888,6 @@ static int ipa_remove(struct platform_device *pdev)
 	ipa_mem_exit(ipa);
 	ipa_reg_exit(ipa);
 	kfree(ipa);
-	wakeup_source_unregister(wakeup_source);
 	ipa_clock_exit(clock);
 	rproc_put(rproc);
 
-- 
2.20.1


  parent reply	other threads:[~2020-09-17 17:59 UTC|newest]

Thread overview: 9+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-09-17 17:39 [PATCH net-next v3 0/7] net: ipa: wake up system on RX available Alex Elder
2020-09-17 17:39 ` [PATCH net-next v3 1/7] net: ipa: use refcount_t for IPA clock reference count Alex Elder
2020-09-17 17:39 ` [PATCH net-next v3 2/7] net: ipa: replace ipa->suspend_ref with a flag bit Alex Elder
2020-09-17 17:39 ` [PATCH net-next v3 3/7] net: ipa: manage endpoints separate from clock Alex Elder
2020-09-17 17:39 ` Alex Elder [this message]
2020-09-17 17:39 ` [PATCH net-next v3 5/7] net: ipa: repurpose CLOCK_HELD flag Alex Elder
2020-09-17 17:39 ` [PATCH net-next v3 6/7] net: ipa: enable wakeup on IPA interrupt Alex Elder
2020-09-17 17:39 ` [PATCH net-next v3 7/7] net: ipa: do not enable GSI interrupt for wakeup Alex Elder
2020-09-19  0:47 ` [PATCH net-next v3 0/7] net: ipa: wake up system on RX available David Miller

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20200917173926.24266-5-elder@linaro.org \
    --to=elder@linaro.org \
    --cc=bjorn.andersson@linaro.org \
    --cc=cpratapa@codeaurora.org \
    --cc=davem@davemloft.net \
    --cc=evgreen@chromium.org \
    --cc=kuba@kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=netdev@vger.kernel.org \
    --cc=subashab@codeaurora.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.