All of lore.kernel.org
 help / color / mirror / Atom feed
From: Petr Vorel <pvorel@suse.cz>
To: ltp@lists.linux.it
Cc: Petr Vorel <pvorel@suse.cz>,
	Lakshmi Ramasubramanian <nramas@linux.microsoft.com>,
	Mimi Zohar <zohar@linux.vnet.ibm.com>,
	Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>,
	linux-integrity@vger.kernel.org
Subject: [PATCH 1/4] IMA: Move get_algorithm_digest(), set_digest_index() to ima_setup.sh
Date: Fri, 25 Sep 2020 19:44:36 +0200	[thread overview]
Message-ID: <20200925174439.9534-2-pvorel@suse.cz> (raw)
In-Reply-To: <20200925174439.9534-1-pvorel@suse.cz>

To be reusable by more tests (preparation for next commit).

Call set_digest_index() inside get_algorithm_digest() if needed
instead of expecting get_algorithm_digest() caller to call
set_digest_index() before.

Signed-off-by: Petr Vorel <pvorel@suse.cz>
---
 .../integrity/ima/tests/ima_measurements.sh   | 62 ++--------------
 .../security/integrity/ima/tests/ima_setup.sh | 70 +++++++++++++++++++
 2 files changed, 76 insertions(+), 56 deletions(-)

diff --git a/testcases/kernel/security/integrity/ima/tests/ima_measurements.sh b/testcases/kernel/security/integrity/ima/tests/ima_measurements.sh
index 9a7500c76..1927e937c 100755
--- a/testcases/kernel/security/integrity/ima/tests/ima_measurements.sh
+++ b/testcases/kernel/security/integrity/ima/tests/ima_measurements.sh
@@ -6,7 +6,7 @@
 #
 # Verify that measurements are added to the measurement list based on policy.
 
-TST_NEEDS_CMDS="awk cut"
+TST_NEEDS_CMDS="awk cut sed"
 TST_SETUP="setup"
 TST_CNT=3
 TST_NEEDS_DEVICE=1
@@ -20,72 +20,22 @@ setup()
 	TEST_FILE="$PWD/test.txt"
 	POLICY="$IMA_DIR/policy"
 	[ -f "$POLICY" ] || tst_res TINFO "not using default policy"
-	DIGEST_INDEX=
-
-	local template="$(tail -1 $ASCII_MEASUREMENTS | cut -d' ' -f 3)"
-	local i
-
-	# parse digest index
-	# https://www.kernel.org/doc/html/latest/security/IMA-templates.html#use
-	case "$template" in
-	ima|ima-ng|ima-sig|ima-buf) DIGEST_INDEX=4 ;;
-	*)
-		# using ima_template_fmt kernel parameter
-		local IFS="|"
-		i=4
-		for word in $template; do
-			if [ "$word" = 'd' -o "$word" = 'd-ng' ]; then
-				DIGEST_INDEX=$i
-				break
-			fi
-			i=$((i+1))
-		done
-	esac
-
-	[ -z "$DIGEST_INDEX" ] && tst_brk TCONF \
-		"Cannot find digest index (template: '$template')"
 }
 
 ima_check()
 {
-	local delimiter=':'
-	local algorithm digest expected_digest line
+	local algorithm digest expected_digest line tmp
 
 	# need to read file to get updated $ASCII_MEASUREMENTS
 	cat $TEST_FILE > /dev/null
 
 	line="$(grep $TEST_FILE $ASCII_MEASUREMENTS | tail -1)"
-	if [ -z "$line" ]; then
-		tst_res TFAIL "cannot find measurement record for '$TEST_FILE'"
-		return
-	fi
-	tst_res TINFO "measurement record: '$line'"
 
-	digest=$(echo "$line" | cut -d' ' -f $DIGEST_INDEX)
-	if [ -z "$digest" ]; then
-		tst_res TFAIL "cannot find digest (index: $DIGEST_INDEX)"
-		return
-	fi
-
-	if [ "${digest#*$delimiter}" != "$digest" ]; then
-		algorithm=$(echo "$digest" | cut -d $delimiter -f 1)
-		digest=$(echo "$digest" | cut -d $delimiter -f 2)
+	if tmp=$(get_algorithm_digest "$line"); then
+		algorithm=$(echo "$tmp" | cut -d'|' -f1)
+		digest=$(echo "$tmp" | cut -d'|' -f2)
 	else
-		case "${#digest}" in
-		32) algorithm="md5" ;;
-		40) algorithm="sha1" ;;
-		*)
-			tst_res TFAIL "algorithm must be either md5 or sha1 (digest: '$digest')"
-			return ;;
-		esac
-	fi
-	if [ -z "$algorithm" ]; then
-		tst_res TFAIL "cannot find algorithm"
-		return
-	fi
-	if [ -z "$digest" ]; then
-		tst_res TFAIL "cannot find digest"
-		return
+		tst_res TBROK "failed to get algorithm/digest for '$TEST_FILE': $tmp"
 	fi
 
 	tst_res TINFO "computing digest for $algorithm algorithm"
diff --git a/testcases/kernel/security/integrity/ima/tests/ima_setup.sh b/testcases/kernel/security/integrity/ima/tests/ima_setup.sh
index 1f17aa707..83ea62d4f 100644
--- a/testcases/kernel/security/integrity/ima/tests/ima_setup.sh
+++ b/testcases/kernel/security/integrity/ima/tests/ima_setup.sh
@@ -191,6 +191,76 @@ ima_cleanup()
 	fi
 }
 
+set_digest_index()
+{
+	DIGEST_INDEX=
+
+	local template="$(tail -1 $ASCII_MEASUREMENTS | cut -d' ' -f 3)"
+	local i word
+
+	# parse digest index
+	# https://www.kernel.org/doc/html/latest/security/IMA-templates.html#use
+	case "$template" in
+	ima|ima-ng|ima-sig) DIGEST_INDEX=4 ;;
+	*)
+		# using ima_template_fmt kernel parameter
+		local IFS="|"
+		i=4
+		for word in $template; do
+			if [ "$word" = 'd' -o "$word" = 'd-ng' ]; then
+				DIGEST_INDEX=$i
+				break
+			fi
+			i=$((i+1))
+		done
+	esac
+
+	[ -z "$DIGEST_INDEX" ] && tst_brk TCONF \
+		"Cannot find digest index (template: '$template')"
+}
+
+get_algorithm_digest()
+{
+	local line="$1"
+	local delimiter=':'
+	local algorithm digest
+
+	if [ -z "$line" ]; then
+		echo "measurement record not found"
+		return 1
+	fi
+
+	[ -z "$DIGEST_INDEX" ] && set_digest_index
+	digest=$(echo "$line" | cut -d' ' -f $DIGEST_INDEX)
+	if [ -z "$digest" ]; then
+		echo "digest not found (index: $DIGEST_INDEX, line: '$line')"
+		return 1
+	fi
+
+	if [ "${digest#*$delimiter}" != "$digest" ]; then
+		algorithm=$(echo "$digest" | cut -d $delimiter -f 1)
+		digest=$(echo "$digest" | cut -d $delimiter -f 2)
+	else
+		case "${#digest}" in
+		32) algorithm="md5" ;;
+		40) algorithm="sha1" ;;
+		*)
+			echo "algorithm must be either md5 or sha1 (digest: '$digest')"
+			return 1 ;;
+		esac
+	fi
+	if [ -z "$algorithm" ]; then
+		echo "algorithm not found"
+		return 1
+	fi
+	if [ -z "$digest" ]; then
+		echo "digest not found"
+		return 1
+	fi
+
+	echo "$algorithm|$digest"
+}
+
 # loop device is needed to use only for tmpfs
 TMPDIR="${TMPDIR:-/tmp}"
 if [ "$(df -T $TMPDIR | tail -1 | awk '{print $2}')" != "tmpfs" -a -n "$TST_NEEDS_DEVICE" ]; then
-- 
2.28.0


WARNING: multiple messages have this Message-ID (diff)
From: Petr Vorel <pvorel@suse.cz>
To: ltp@lists.linux.it
Subject: [LTP] [PATCH 1/4] IMA: Move get_algorithm_digest(), set_digest_index() to ima_setup.sh
Date: Fri, 25 Sep 2020 19:44:36 +0200	[thread overview]
Message-ID: <20200925174439.9534-2-pvorel@suse.cz> (raw)
In-Reply-To: <20200925174439.9534-1-pvorel@suse.cz>

To be reusable by more tests (preparation for next commit).

Call set_digest_index() inside get_algorithm_digest() if needed
instead of expecting get_algorithm_digest() caller to call
set_digest_index() before.

Signed-off-by: Petr Vorel <pvorel@suse.cz>
---
 .../integrity/ima/tests/ima_measurements.sh   | 62 ++--------------
 .../security/integrity/ima/tests/ima_setup.sh | 70 +++++++++++++++++++
 2 files changed, 76 insertions(+), 56 deletions(-)

diff --git a/testcases/kernel/security/integrity/ima/tests/ima_measurements.sh b/testcases/kernel/security/integrity/ima/tests/ima_measurements.sh
index 9a7500c76..1927e937c 100755
--- a/testcases/kernel/security/integrity/ima/tests/ima_measurements.sh
+++ b/testcases/kernel/security/integrity/ima/tests/ima_measurements.sh
@@ -6,7 +6,7 @@
 #
 # Verify that measurements are added to the measurement list based on policy.
 
-TST_NEEDS_CMDS="awk cut"
+TST_NEEDS_CMDS="awk cut sed"
 TST_SETUP="setup"
 TST_CNT=3
 TST_NEEDS_DEVICE=1
@@ -20,72 +20,22 @@ setup()
 	TEST_FILE="$PWD/test.txt"
 	POLICY="$IMA_DIR/policy"
 	[ -f "$POLICY" ] || tst_res TINFO "not using default policy"
-	DIGEST_INDEX=
-
-	local template="$(tail -1 $ASCII_MEASUREMENTS | cut -d' ' -f 3)"
-	local i
-
-	# parse digest index
-	# https://www.kernel.org/doc/html/latest/security/IMA-templates.html#use
-	case "$template" in
-	ima|ima-ng|ima-sig|ima-buf) DIGEST_INDEX=4 ;;
-	*)
-		# using ima_template_fmt kernel parameter
-		local IFS="|"
-		i=4
-		for word in $template; do
-			if [ "$word" = 'd' -o "$word" = 'd-ng' ]; then
-				DIGEST_INDEX=$i
-				break
-			fi
-			i=$((i+1))
-		done
-	esac
-
-	[ -z "$DIGEST_INDEX" ] && tst_brk TCONF \
-		"Cannot find digest index (template: '$template')"
 }
 
 ima_check()
 {
-	local delimiter=':'
-	local algorithm digest expected_digest line
+	local algorithm digest expected_digest line tmp
 
 	# need to read file to get updated $ASCII_MEASUREMENTS
 	cat $TEST_FILE > /dev/null
 
 	line="$(grep $TEST_FILE $ASCII_MEASUREMENTS | tail -1)"
-	if [ -z "$line" ]; then
-		tst_res TFAIL "cannot find measurement record for '$TEST_FILE'"
-		return
-	fi
-	tst_res TINFO "measurement record: '$line'"
 
-	digest=$(echo "$line" | cut -d' ' -f $DIGEST_INDEX)
-	if [ -z "$digest" ]; then
-		tst_res TFAIL "cannot find digest (index: $DIGEST_INDEX)"
-		return
-	fi
-
-	if [ "${digest#*$delimiter}" != "$digest" ]; then
-		algorithm=$(echo "$digest" | cut -d $delimiter -f 1)
-		digest=$(echo "$digest" | cut -d $delimiter -f 2)
+	if tmp=$(get_algorithm_digest "$line"); then
+		algorithm=$(echo "$tmp" | cut -d'|' -f1)
+		digest=$(echo "$tmp" | cut -d'|' -f2)
 	else
-		case "${#digest}" in
-		32) algorithm="md5" ;;
-		40) algorithm="sha1" ;;
-		*)
-			tst_res TFAIL "algorithm must be either md5 or sha1 (digest: '$digest')"
-			return ;;
-		esac
-	fi
-	if [ -z "$algorithm" ]; then
-		tst_res TFAIL "cannot find algorithm"
-		return
-	fi
-	if [ -z "$digest" ]; then
-		tst_res TFAIL "cannot find digest"
-		return
+		tst_res TBROK "failed to get algorithm/digest for '$TEST_FILE': $tmp"
 	fi
 
 	tst_res TINFO "computing digest for $algorithm algorithm"
diff --git a/testcases/kernel/security/integrity/ima/tests/ima_setup.sh b/testcases/kernel/security/integrity/ima/tests/ima_setup.sh
index 1f17aa707..83ea62d4f 100644
--- a/testcases/kernel/security/integrity/ima/tests/ima_setup.sh
+++ b/testcases/kernel/security/integrity/ima/tests/ima_setup.sh
@@ -191,6 +191,76 @@ ima_cleanup()
 	fi
 }
 
+set_digest_index()
+{
+	DIGEST_INDEX=
+
+	local template="$(tail -1 $ASCII_MEASUREMENTS | cut -d' ' -f 3)"
+	local i word
+
+	# parse digest index
+	# https://www.kernel.org/doc/html/latest/security/IMA-templates.html#use
+	case "$template" in
+	ima|ima-ng|ima-sig) DIGEST_INDEX=4 ;;
+	*)
+		# using ima_template_fmt kernel parameter
+		local IFS="|"
+		i=4
+		for word in $template; do
+			if [ "$word" = 'd' -o "$word" = 'd-ng' ]; then
+				DIGEST_INDEX=$i
+				break
+			fi
+			i=$((i+1))
+		done
+	esac
+
+	[ -z "$DIGEST_INDEX" ] && tst_brk TCONF \
+		"Cannot find digest index (template: '$template')"
+}
+
+get_algorithm_digest()
+{
+	local line="$1"
+	local delimiter=':'
+	local algorithm digest
+
+	if [ -z "$line" ]; then
+		echo "measurement record not found"
+		return 1
+	fi
+
+	[ -z "$DIGEST_INDEX" ] && set_digest_index
+	digest=$(echo "$line" | cut -d' ' -f $DIGEST_INDEX)
+	if [ -z "$digest" ]; then
+		echo "digest not found (index: $DIGEST_INDEX, line: '$line')"
+		return 1
+	fi
+
+	if [ "${digest#*$delimiter}" != "$digest" ]; then
+		algorithm=$(echo "$digest" | cut -d $delimiter -f 1)
+		digest=$(echo "$digest" | cut -d $delimiter -f 2)
+	else
+		case "${#digest}" in
+		32) algorithm="md5" ;;
+		40) algorithm="sha1" ;;
+		*)
+			echo "algorithm must be either md5 or sha1 (digest: '$digest')"
+			return 1 ;;
+		esac
+	fi
+	if [ -z "$algorithm" ]; then
+		echo "algorithm not found"
+		return 1
+	fi
+	if [ -z "$digest" ]; then
+		echo "digest not found"
+		return 1
+	fi
+
+	echo "$algorithm|$digest"
+}
+
 # loop device is needed to use only for tmpfs
 TMPDIR="${TMPDIR:-/tmp}"
 if [ "$(df -T $TMPDIR | tail -1 | awk '{print $2}')" != "tmpfs" -a -n "$TST_NEEDS_DEVICE" ]; then
-- 
2.28.0


  reply	other threads:[~2020-09-25 17:44 UTC|newest]

Thread overview: 12+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-09-25 17:44 [PATCH 0/4] TPM 2.0 fixes in IMA tests Petr Vorel
2020-09-25 17:44 ` [LTP] " Petr Vorel
2020-09-25 17:44 ` Petr Vorel [this message]
2020-09-25 17:44   ` [LTP] [PATCH 1/4] IMA: Move get_algorithm_digest(), set_digest_index() to ima_setup.sh Petr Vorel
2020-09-25 17:44 ` [PATCH 2/4] IMA: Rewrite ima_boot_aggregate.c to new API Petr Vorel
2020-09-25 17:44   ` [LTP] " Petr Vorel
2020-09-25 17:44 ` [PATCH 3/4] ima_tpm.sh: Fix calculating boot aggregate Petr Vorel
2020-09-25 17:44   ` [LTP] " Petr Vorel
2020-09-25 18:30   ` Petr Vorel
2020-09-25 18:30     ` [LTP] " Petr Vorel
2020-09-25 17:44 ` [PATCH 4/4] ima_tpm.sh: Fix calculating PCR aggregate Petr Vorel
2020-09-25 17:44   ` [LTP] " Petr Vorel

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20200925174439.9534-2-pvorel@suse.cz \
    --to=pvorel@suse.cz \
    --cc=jarkko.sakkinen@linux.intel.com \
    --cc=linux-integrity@vger.kernel.org \
    --cc=ltp@lists.linux.it \
    --cc=nramas@linux.microsoft.com \
    --cc=zohar@linux.vnet.ibm.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.