[PATCH v2 0/6] iio: sx9310: Support setting various settings

[PATCH v2 0/6] iio: sx9310: Support setting various settings

[Stephen Boyd]

I need to configure various settings such as thresholds, gain factors,
etc. on this device. Some settings matter at boot, while others can wait
for userspace to configure things. This patch series adds support to
set these various bits in the registers of this device.

Changes from v1 (https://lore.kernel.org/r/20200903221828.3657250-1-swboyd@chromium.org)
 - A bunch more patches for userspace settings
 - Removed body thresholds as they're probably not used
 - Removed compensate common as it probably doesn't matter
 - Moved thresholds, gain factor, hysteresis, debounce to userspace

Stephen Boyd (6):
  iio: sx9310: Support hardware gain factor
  iio: sx9310: Support setting proximity thresholds
  iio: sx9310: Support setting hysteresis values
  iio: sx9310: Support setting debounce values
  dt-bindings: iio: sx9310: Add various settings as DT properties
  iio: sx9310: Set various settings from DT

 .../iio/proximity/semtech,sx9310.yaml         |  61 ++
 drivers/iio/proximity/sx9310.c                | 524 +++++++++++++++++-
 2 files changed, 579 insertions(+), 6 deletions(-)

Cc: Daniel Campello <campello@chromium.org>
Cc: Lars-Peter Clausen <lars@metafoo.de>
Cc: Peter Meerwald-Stadler <pmeerw@pmeerw.net>
Cc: Douglas Anderson <dianders@chromium.org>
Cc: Gwendal Grignou <gwendal@chromium.org>
Cc: Evan Green <evgreen@chromium.org>
Cc: Rob Herring <robh+dt@kernel.org>
Cc: <devicetree@vger.kernel.org>

base-commit: 1bebdcb928eba880f3a119bacb8149216206958a
-- 
Sent by a computer, using git, on the internet

[PATCH v2 1/6] iio: sx9310: Support hardware gain factor

[Stephen Boyd]

Add support to set the hardware gain of the channels as a multiplier of
2x, 4x, or 8x.

Cc: Daniel Campello <campello@chromium.org>
Cc: Lars-Peter Clausen <lars@metafoo.de>
Cc: Peter Meerwald-Stadler <pmeerw@pmeerw.net>
Cc: Douglas Anderson <dianders@chromium.org>
Cc: Gwendal Grignou <gwendal@chromium.org>
Cc: Evan Green <evgreen@chromium.org>
Signed-off-by: Stephen Boyd <swboyd@chromium.org>
---
 drivers/iio/proximity/sx9310.c | 109 +++++++++++++++++++++++++++++++--
 1 file changed, 104 insertions(+), 5 deletions(-)

diff --git a/drivers/iio/proximity/sx9310.c b/drivers/iio/proximity/sx9310.c
index 9d72d08ab9e7..030397a85845 100644
--- a/drivers/iio/proximity/sx9310.c
+++ b/drivers/iio/proximity/sx9310.c
@@ -16,6 +16,7 @@
 #include <linux/i2c.h>
 #include <linux/irq.h>
 #include <linux/kernel.h>
+#include <linux/log2.h>
 #include <linux/mod_devicetable.h>
 #include <linux/module.h>
 #include <linux/pm.h>
@@ -51,7 +52,9 @@
 #define   SX9310_REG_PROX_CTRL2_COMBMODE_CS1_CS2	(0x02 << 6)
 #define   SX9310_REG_PROX_CTRL2_SHIELDEN_DYNAMIC	(0x01 << 2)
 #define SX9310_REG_PROX_CTRL3				0x13
+#define   SX9310_REG_PROX_CTRL3_GAIN0_MASK		GENMASK(3, 2)
 #define   SX9310_REG_PROX_CTRL3_GAIN0_X8		(0x03 << 2)
+#define   SX9310_REG_PROX_CTRL3_GAIN12_MASK		GENMASK(1, 0)
 #define   SX9310_REG_PROX_CTRL3_GAIN12_X4		0x02
 #define SX9310_REG_PROX_CTRL4				0x14
 #define   SX9310_REG_PROX_CTRL4_RESOLUTION_FINEST	0x07
@@ -145,15 +148,18 @@ static const struct iio_event_spec sx9310_events[] = {
 	{
 		.type = IIO_EV_TYPE_THRESH,
 		.dir = IIO_EV_DIR_EITHER,
-		.mask_separate = BIT(IIO_EV_INFO_ENABLE),
+		.mask_separate = BIT(IIO_EV_INFO_ENABLE) | BIT(IIO_EV_INFO_VALUE),
 	},
 };
 
 #define SX9310_NAMED_CHANNEL(idx, name)					 \
 	{								 \
 		.type = IIO_PROXIMITY,					 \
-		.info_mask_separate = BIT(IIO_CHAN_INFO_RAW),		 \
+		.info_mask_separate = BIT(IIO_CHAN_INFO_RAW) |		 \
+				      BIT(IIO_CHAN_INFO_HARDWAREGAIN),   \
 		.info_mask_shared_by_all = BIT(IIO_CHAN_INFO_SAMP_FREQ), \
+		.info_mask_separate_available =				 \
+			BIT(IIO_CHAN_INFO_HARDWAREGAIN),		 \
 		.indexed = 1,						 \
 		.channel = idx,						 \
 		.extend_name = name,					 \
@@ -426,6 +432,34 @@ static int sx9310_read_proximity(struct sx9310_data *data,
 	return ret;
 }
 
+static int sx9310_read_gain(struct sx9310_data *data,
+			    const struct iio_chan_spec *chan, int *val)
+{
+	unsigned int regval, gain;
+	int ret;
+
+	ret = regmap_read(data->regmap, SX9310_REG_PROX_CTRL3, &regval);
+	if (ret)
+		return ret;
+
+	switch (chan->channel) {
+	case 0:
+	case 3:
+		gain = FIELD_GET(SX9310_REG_PROX_CTRL3_GAIN0_MASK, regval);
+		break;
+	case 1:
+	case 2:
+		gain = FIELD_GET(SX9310_REG_PROX_CTRL3_GAIN12_MASK, regval);
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	*val = 1 << gain;
+
+	return IIO_VAL_INT;
+}
+
 static int sx9310_read_samp_freq(struct sx9310_data *data, int *val, int *val2)
 {
 	unsigned int regval;
@@ -461,6 +495,14 @@ static int sx9310_read_raw(struct iio_dev *indio_dev,
 		ret = sx9310_read_proximity(data, chan, val);
 		iio_device_release_direct_mode(indio_dev);
 		return ret;
+	case IIO_CHAN_INFO_HARDWAREGAIN:
+		ret = iio_device_claim_direct_mode(indio_dev);
+		if (ret)
+			return ret;
+
+		ret = sx9310_read_gain(data, chan, val);
+		iio_device_release_direct_mode(indio_dev);
+		return ret;
 	case IIO_CHAN_INFO_SAMP_FREQ:
 		return sx9310_read_samp_freq(data, val, val2);
 	default:
@@ -468,6 +510,27 @@ static int sx9310_read_raw(struct iio_dev *indio_dev,
 	}
 }
 
+static const int sx9310_gain_vals[] = { 1, 2, 4, 8 };
+
+static int sx9310_read_avail(struct iio_dev *indio_dev,
+			     struct iio_chan_spec const *chan,
+			     const int **vals, int *type, int *length,
+			     long mask)
+{
+	if (chan->type != IIO_PROXIMITY)
+		return -EINVAL;
+
+	switch (mask) {
+	case IIO_CHAN_INFO_HARDWAREGAIN:
+		*type = IIO_VAL_INT;
+		*length = ARRAY_SIZE(sx9310_gain_vals);
+		*vals = sx9310_gain_vals;
+		return IIO_AVAIL_LIST;
+	}
+
+	return -EINVAL;
+}
+
 static int sx9310_set_samp_freq(struct sx9310_data *data, int val, int val2)
 {
 	int i, ret;
@@ -492,6 +555,37 @@ static int sx9310_set_samp_freq(struct sx9310_data *data, int val, int val2)
 	return ret;
 }
 
+static int sx9310_write_gain(struct sx9310_data *data,
+			    const struct iio_chan_spec *chan, int val)
+{
+	unsigned int gain, mask;
+	int ret;
+
+	gain = ilog2(val);
+
+	switch (chan->channel) {
+	case 0:
+	case 3:
+		mask = SX9310_REG_PROX_CTRL3_GAIN0_MASK;
+		gain = FIELD_PREP(SX9310_REG_PROX_CTRL3_GAIN0_MASK, gain);
+		break;
+	case 1:
+	case 2:
+		mask = SX9310_REG_PROX_CTRL3_GAIN12_MASK;
+		gain = FIELD_PREP(SX9310_REG_PROX_CTRL3_GAIN12_MASK, gain);
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	mutex_lock(&data->mutex);
+	ret = regmap_update_bits(data->regmap, SX9310_REG_PROX_CTRL3, mask,
+				 gain);
+	mutex_unlock(&data->mutex);
+
+	return ret;
+}
+
 static int sx9310_write_raw(struct iio_dev *indio_dev,
 			    const struct iio_chan_spec *chan, int val, int val2,
 			    long mask)
@@ -501,10 +595,14 @@ static int sx9310_write_raw(struct iio_dev *indio_dev,
 	if (chan->type != IIO_PROXIMITY)
 		return -EINVAL;
 
-	if (mask != IIO_CHAN_INFO_SAMP_FREQ)
-		return -EINVAL;
+	switch (mask) {
+	case IIO_CHAN_INFO_SAMP_FREQ:
+		return sx9310_set_samp_freq(data, val, val2);
+	case IIO_CHAN_INFO_HARDWAREGAIN:
+		return sx9310_write_gain(data, chan, val);
+	}
 
-	return sx9310_set_samp_freq(data, val, val2);
+	return -EINVAL;
 }
 
 static irqreturn_t sx9310_irq_handler(int irq, void *private)
@@ -645,6 +743,7 @@ static const struct attribute_group sx9310_attribute_group = {
 static const struct iio_info sx9310_info = {
 	.attrs = &sx9310_attribute_group,
 	.read_raw = sx9310_read_raw,
+	.read_avail = sx9310_read_avail,
 	.write_raw = sx9310_write_raw,
 	.read_event_config = sx9310_read_event_config,
 	.write_event_config = sx9310_write_event_config,
-- 
Sent by a computer, using git, on the internet

[PATCH v2 2/6] iio: sx9310: Support setting proximity thresholds

[Stephen Boyd]

Add support to set the proximity thresholds for each channel.

Cc: Daniel Campello <campello@chromium.org>
Cc: Lars-Peter Clausen <lars@metafoo.de>
Cc: Peter Meerwald-Stadler <pmeerw@pmeerw.net>
Cc: Douglas Anderson <dianders@chromium.org>
Cc: Gwendal Grignou <gwendal@chromium.org>
Cc: Evan Green <evgreen@chromium.org>
Signed-off-by: Stephen Boyd <swboyd@chromium.org>
---
 drivers/iio/proximity/sx9310.c | 114 +++++++++++++++++++++++++++++++++
 1 file changed, 114 insertions(+)

diff --git a/drivers/iio/proximity/sx9310.c b/drivers/iio/proximity/sx9310.c
index 030397a85845..35e927dc4f66 100644
--- a/drivers/iio/proximity/sx9310.c
+++ b/drivers/iio/proximity/sx9310.c
@@ -68,6 +68,7 @@
 #define   SX9310_REG_PROX_CTRL7_AVGNEGFILT_2		(0x01 << 3)
 #define   SX9310_REG_PROX_CTRL7_AVGPOSFILT_512		0x05
 #define SX9310_REG_PROX_CTRL8				0x18
+#define   SX9310_REG_PROX_CTRL8_9_PTHRESH_MASK		GENMASK(7, 3)
 #define SX9310_REG_PROX_CTRL9				0x19
 #define   SX9310_REG_PROX_CTRL8_9_PTHRESH_28		(0x08 << 3)
 #define   SX9310_REG_PROX_CTRL8_9_PTHRESH_96		(0x11 << 3)
@@ -531,6 +532,117 @@ static int sx9310_read_avail(struct iio_dev *indio_dev,
 	return -EINVAL;
 }
 
+static const unsigned int sx9310_pthresh_codes[] = {
+	2, 4, 6, 8, 12, 16, 20, 24, 28, 32, 40, 48, 56, 64, 72, 80, 88, 96, 112,
+	128, 144, 160, 192, 224, 256, 320, 384, 512, 640, 768, 1024, 1536
+};
+
+static int sx9310_get_thresh_reg(unsigned int channel)
+{
+	switch (channel) {
+	case 0:
+	case 3:
+		return SX9310_REG_PROX_CTRL8;
+	case 1:
+	case 2:
+		return SX9310_REG_PROX_CTRL9;
+	}
+
+	return -EINVAL;
+}
+
+static int sx9310_read_thresh(struct sx9310_data *data,
+			      const struct iio_chan_spec *chan, int *val)
+{
+	unsigned int reg;
+	unsigned int regval;
+	int ret;
+
+	reg = ret = sx9310_get_thresh_reg(chan->channel);
+	if (ret < 0)
+		return ret;
+
+	ret = regmap_read(data->regmap, reg, &regval);
+	if (ret)
+		return ret;
+
+	regval = FIELD_GET(SX9310_REG_PROX_CTRL8_9_PTHRESH_MASK, regval);
+	if (regval > ARRAY_SIZE(sx9310_pthresh_codes))
+		return -EINVAL;
+
+	*val = sx9310_pthresh_codes[regval];
+	return IIO_VAL_INT;
+}
+
+static int sx9310_read_event_val(struct iio_dev *indio_dev,
+				 const struct iio_chan_spec *chan,
+				 enum iio_event_type type,
+				 enum iio_event_direction dir,
+				 enum iio_event_info info, int *val, int *val2)
+{
+	struct sx9310_data *data = iio_priv(indio_dev);
+
+	if (chan->type != IIO_PROXIMITY)
+		return -EINVAL;
+
+	switch (info) {
+	case IIO_EV_INFO_VALUE:
+		return sx9310_read_thresh(data, chan, val);
+	default:
+		return -EINVAL;
+	}
+}
+
+static int sx9310_write_thresh(struct sx9310_data *data,
+			       const struct iio_chan_spec *chan, int val)
+{
+	unsigned int reg;
+	unsigned int regval;
+	int ret, i;
+
+	reg = ret = sx9310_get_thresh_reg(chan->channel);
+	if (ret < 0)
+		return ret;
+
+	for (i = 0; i < ARRAY_SIZE(sx9310_pthresh_codes); i++) {
+		if (sx9310_pthresh_codes[i] == val) {
+			regval = i;
+			break;
+		}
+	}
+
+	if (i == ARRAY_SIZE(sx9310_pthresh_codes))
+		return -EINVAL;
+
+	regval = FIELD_PREP(SX9310_REG_PROX_CTRL8_9_PTHRESH_MASK, regval);
+	mutex_lock(&data->mutex);
+	ret = regmap_update_bits(data->regmap, reg,
+				 SX9310_REG_PROX_CTRL8_9_PTHRESH_MASK, regval);
+	mutex_unlock(&data->mutex);
+
+	return ret;
+}
+
+
+static int sx9310_write_event_val(struct iio_dev *indio_dev,
+				  const struct iio_chan_spec *chan,
+				  enum iio_event_type type,
+				  enum iio_event_direction dir,
+				  enum iio_event_info info, int val, int val2)
+{
+	struct sx9310_data *data = iio_priv(indio_dev);
+
+	if (chan->type != IIO_PROXIMITY)
+		return -EINVAL;
+
+	switch (info) {
+	case IIO_EV_INFO_VALUE:
+		return sx9310_write_thresh(data, chan, val);
+	default:
+		return -EINVAL;
+	}
+}
+
 static int sx9310_set_samp_freq(struct sx9310_data *data, int val, int val2)
 {
 	int i, ret;
@@ -744,6 +856,8 @@ static const struct iio_info sx9310_info = {
 	.attrs = &sx9310_attribute_group,
 	.read_raw = sx9310_read_raw,
 	.read_avail = sx9310_read_avail,
+	.read_event_value = sx9310_read_event_val,
+	.write_event_value = sx9310_write_event_val,
 	.write_raw = sx9310_write_raw,
 	.read_event_config = sx9310_read_event_config,
 	.write_event_config = sx9310_write_event_config,
-- 
Sent by a computer, using git, on the internet

[PATCH v2 3/6] iio: sx9310: Support setting hysteresis values

[Stephen Boyd]

Add support for setting the hysteresis as a shifted value of a channel's
proximity threshold. Each channel can have a different threshold, but
the hysteresis applies to all channels as a right shift factor.
Therefore, duplicate the hysteresis value across all channels and make
it depend on the channel's proximity threshold. This is sort of odd but
seems to work in practice as most of the time only one channel is used.

Cc: Daniel Campello <campello@chromium.org>
Cc: Lars-Peter Clausen <lars@metafoo.de>
Cc: Peter Meerwald-Stadler <pmeerw@pmeerw.net>
Cc: Douglas Anderson <dianders@chromium.org>
Cc: Gwendal Grignou <gwendal@chromium.org>
Cc: Evan Green <evgreen@chromium.org>
Signed-off-by: Stephen Boyd <swboyd@chromium.org>
---
 drivers/iio/proximity/sx9310.c | 62 +++++++++++++++++++++++++++++++++-
 1 file changed, 61 insertions(+), 1 deletion(-)

diff --git a/drivers/iio/proximity/sx9310.c b/drivers/iio/proximity/sx9310.c
index 35e927dc4f66..9eb10e8263e7 100644
--- a/drivers/iio/proximity/sx9310.c
+++ b/drivers/iio/proximity/sx9310.c
@@ -75,6 +75,7 @@
 #define   SX9310_REG_PROX_CTRL8_9_BODYTHRESH_900	0x03
 #define   SX9310_REG_PROX_CTRL8_9_BODYTHRESH_1500	0x05
 #define SX9310_REG_PROX_CTRL10				0x1a
+#define   SX9310_REG_PROX_CTRL10_HYST_MASK		GENMASK(5, 4)
 #define   SX9310_REG_PROX_CTRL10_HYST_6PCT		(0x01 << 4)
 #define   SX9310_REG_PROX_CTRL10_FAR_DEBOUNCE_2		0x01
 #define SX9310_REG_PROX_CTRL11				0x1b
@@ -149,7 +150,9 @@ static const struct iio_event_spec sx9310_events[] = {
 	{
 		.type = IIO_EV_TYPE_THRESH,
 		.dir = IIO_EV_DIR_EITHER,
-		.mask_separate = BIT(IIO_EV_INFO_ENABLE) | BIT(IIO_EV_INFO_VALUE),
+		.mask_separate = BIT(IIO_EV_INFO_ENABLE) |
+				 BIT(IIO_EV_INFO_HYSTERESIS) |
+				 BIT(IIO_EV_INFO_VALUE),
 	},
 };
 
@@ -574,6 +577,30 @@ static int sx9310_read_thresh(struct sx9310_data *data,
 	return IIO_VAL_INT;
 }
 
+static int sx9310_read_hysteresis(struct sx9310_data *data,
+				  const struct iio_chan_spec *chan, int *val)
+{
+	unsigned int regval, pthresh;
+	int ret;
+
+	ret = sx9310_read_thresh(data, chan, &pthresh);
+	if (ret < 0)
+		return ret;
+
+	ret = regmap_read(data->regmap, SX9310_REG_PROX_CTRL10, &regval);
+	if (ret)
+		return ret;
+
+	regval = FIELD_GET(SX9310_REG_PROX_CTRL10_HYST_MASK, regval);
+	if (!regval)
+		regval = 5;
+
+	/* regval is at most 5 */
+	*val = pthresh >> (5 - regval);
+
+	return IIO_VAL_INT;
+}
+
 static int sx9310_read_event_val(struct iio_dev *indio_dev,
 				 const struct iio_chan_spec *chan,
 				 enum iio_event_type type,
@@ -588,6 +615,8 @@ static int sx9310_read_event_val(struct iio_dev *indio_dev,
 	switch (info) {
 	case IIO_EV_INFO_VALUE:
 		return sx9310_read_thresh(data, chan, val);
+	case IIO_EV_INFO_HYSTERESIS:
+		return sx9310_read_hysteresis(data, chan, val);
 	default:
 		return -EINVAL;
 	}
@@ -623,6 +652,35 @@ static int sx9310_write_thresh(struct sx9310_data *data,
 	return ret;
 }
 
+static int sx9310_write_hysteresis(struct sx9310_data *data,
+				   const struct iio_chan_spec *chan, int _val)
+{
+	unsigned int hyst, val = _val;
+	int ret, pthresh;
+
+	ret = sx9310_read_thresh(data, chan, &pthresh);
+	if (ret < 0)
+		return ret;
+
+	if (val == 0)
+		hyst = 0;
+	else if (val == pthresh >> 2)
+		hyst = 3;
+	else if (val == pthresh >> 3)
+		hyst = 2;
+	else if (val == pthresh >> 4)
+		hyst = 1;
+	else
+		return -EINVAL;
+
+	hyst = FIELD_PREP(SX9310_REG_PROX_CTRL10_HYST_MASK, hyst);
+	mutex_lock(&data->mutex);
+	ret = regmap_update_bits(data->regmap, SX9310_REG_PROX_CTRL10,
+				 SX9310_REG_PROX_CTRL10_HYST_MASK, hyst);
+	mutex_unlock(&data->mutex);
+
+	return ret;
+}
 
 static int sx9310_write_event_val(struct iio_dev *indio_dev,
 				  const struct iio_chan_spec *chan,
@@ -638,6 +696,8 @@ static int sx9310_write_event_val(struct iio_dev *indio_dev,
 	switch (info) {
 	case IIO_EV_INFO_VALUE:
 		return sx9310_write_thresh(data, chan, val);
+	case IIO_EV_INFO_HYSTERESIS:
+		return sx9310_write_hysteresis(data, chan, val);
 	default:
 		return -EINVAL;
 	}
-- 
Sent by a computer, using git, on the internet

[PATCH v2 4/6] iio: sx9310: Support setting debounce values

[Stephen Boyd]

The rising and falling directions can be debounced in the hardware as
"close" and "far" debounce settings. Add support for these as rising and
falling debounce settings.

Cc: Daniel Campello <campello@chromium.org>
Cc: Lars-Peter Clausen <lars@metafoo.de>
Cc: Peter Meerwald-Stadler <pmeerw@pmeerw.net>
Cc: Douglas Anderson <dianders@chromium.org>
Cc: Gwendal Grignou <gwendal@chromium.org>
Cc: Evan Green <evgreen@chromium.org>
Signed-off-by: Stephen Boyd <swboyd@chromium.org>
---
 drivers/iio/proximity/sx9310.c | 100 +++++++++++++++++++++++++++++++++
 1 file changed, 100 insertions(+)

diff --git a/drivers/iio/proximity/sx9310.c b/drivers/iio/proximity/sx9310.c
index 9eb10e8263e7..3f909177eca9 100644
--- a/drivers/iio/proximity/sx9310.c
+++ b/drivers/iio/proximity/sx9310.c
@@ -77,6 +77,8 @@
 #define SX9310_REG_PROX_CTRL10				0x1a
 #define   SX9310_REG_PROX_CTRL10_HYST_MASK		GENMASK(5, 4)
 #define   SX9310_REG_PROX_CTRL10_HYST_6PCT		(0x01 << 4)
+#define   SX9310_REG_PROX_CTRL10_CLOSE_DEBOUNCE_MASK	GENMASK(3, 2)
+#define   SX9310_REG_PROX_CTRL10_FAR_DEBOUNCE_MASK	GENMASK(1, 0)
 #define   SX9310_REG_PROX_CTRL10_FAR_DEBOUNCE_2		0x01
 #define SX9310_REG_PROX_CTRL11				0x1b
 #define SX9310_REG_PROX_CTRL12				0x1c
@@ -147,6 +149,16 @@ struct sx9310_data {
 };
 
 static const struct iio_event_spec sx9310_events[] = {
+	{
+		.type = IIO_EV_TYPE_THRESH,
+		.dir = IIO_EV_DIR_RISING,
+		.mask_shared_by_all = BIT(IIO_EV_INFO_PERIOD),
+	},
+	{
+		.type = IIO_EV_TYPE_THRESH,
+		.dir = IIO_EV_DIR_FALLING,
+		.mask_shared_by_all = BIT(IIO_EV_INFO_PERIOD),
+	},
 	{
 		.type = IIO_EV_TYPE_THRESH,
 		.dir = IIO_EV_DIR_EITHER,
@@ -601,6 +613,42 @@ static int sx9310_read_hysteresis(struct sx9310_data *data,
 	return IIO_VAL_INT;
 }
 
+static int sx9310_read_far_debounce(struct sx9310_data *data, int *val)
+{
+	unsigned int regval;
+	int ret;
+
+	ret = regmap_read(data->regmap, SX9310_REG_PROX_CTRL10, &regval);
+	if (ret)
+		return ret;
+
+	regval = FIELD_GET(SX9310_REG_PROX_CTRL10_FAR_DEBOUNCE_MASK, regval);
+	if (regval)
+		*val = 1 << regval;
+	else
+		*val = 0;
+
+	return IIO_VAL_INT;
+}
+
+static int sx9310_read_close_debounce(struct sx9310_data *data, int *val)
+{
+	unsigned int regval;
+	int ret;
+
+	ret = regmap_read(data->regmap, SX9310_REG_PROX_CTRL10, &regval);
+	if (ret)
+		return ret;
+
+	regval = FIELD_GET(SX9310_REG_PROX_CTRL10_CLOSE_DEBOUNCE_MASK, regval);
+	if (regval)
+		*val = 1 << regval;
+	else
+		*val = 0;
+
+	return IIO_VAL_INT;
+}
+
 static int sx9310_read_event_val(struct iio_dev *indio_dev,
 				 const struct iio_chan_spec *chan,
 				 enum iio_event_type type,
@@ -615,6 +663,15 @@ static int sx9310_read_event_val(struct iio_dev *indio_dev,
 	switch (info) {
 	case IIO_EV_INFO_VALUE:
 		return sx9310_read_thresh(data, chan, val);
+	case IIO_EV_INFO_PERIOD:
+		switch (dir) {
+		case IIO_EV_DIR_RISING:
+			return sx9310_read_far_debounce(data, val);
+		case IIO_EV_DIR_FALLING:
+			return sx9310_read_close_debounce(data, val);
+		default:
+			return -EINVAL;
+		}
 	case IIO_EV_INFO_HYSTERESIS:
 		return sx9310_read_hysteresis(data, chan, val);
 	default:
@@ -682,6 +739,40 @@ static int sx9310_write_hysteresis(struct sx9310_data *data,
 	return ret;
 }
 
+static int sx9310_write_far_debounce(struct sx9310_data *data, int val)
+{
+	int ret;
+	unsigned int regval;
+
+	val = ilog2(val);
+	regval = FIELD_PREP(SX9310_REG_PROX_CTRL10_FAR_DEBOUNCE_MASK, val);
+
+	mutex_lock(&data->mutex);
+	ret = regmap_update_bits(data->regmap, SX9310_REG_PROX_CTRL10,
+				 SX9310_REG_PROX_CTRL10_FAR_DEBOUNCE_MASK,
+				 regval);
+	mutex_unlock(&data->mutex);
+
+	return ret;
+}
+
+static int sx9310_write_close_debounce(struct sx9310_data *data, int val)
+{
+	int ret;
+	unsigned int regval;
+
+	val = ilog2(val);
+	regval = FIELD_PREP(SX9310_REG_PROX_CTRL10_CLOSE_DEBOUNCE_MASK, val);
+
+	mutex_lock(&data->mutex);
+	ret = regmap_update_bits(data->regmap, SX9310_REG_PROX_CTRL10,
+				 SX9310_REG_PROX_CTRL10_CLOSE_DEBOUNCE_MASK,
+				 regval);
+	mutex_unlock(&data->mutex);
+
+	return ret;
+}
+
 static int sx9310_write_event_val(struct iio_dev *indio_dev,
 				  const struct iio_chan_spec *chan,
 				  enum iio_event_type type,
@@ -696,6 +787,15 @@ static int sx9310_write_event_val(struct iio_dev *indio_dev,
 	switch (info) {
 	case IIO_EV_INFO_VALUE:
 		return sx9310_write_thresh(data, chan, val);
+	case IIO_EV_INFO_PERIOD:
+		switch (dir) {
+		case IIO_EV_DIR_RISING:
+			return sx9310_write_far_debounce(data, val);
+		case IIO_EV_DIR_FALLING:
+			return sx9310_write_close_debounce(data, val);
+		default:
+			return -EINVAL;
+		}
 	case IIO_EV_INFO_HYSTERESIS:
 		return sx9310_write_hysteresis(data, chan, val);
 	default:
-- 
Sent by a computer, using git, on the internet

[PATCH v2 5/6] dt-bindings: iio: sx9310: Add various settings as DT properties

[Stephen Boyd]

We need to set various bits in the hardware registers for this device to
operate properly depending on how it is installed. Add a handful of DT
properties to configure these things.

Cc: Daniel Campello <campello@chromium.org>
Cc: Lars-Peter Clausen <lars@metafoo.de>
Cc: Peter Meerwald-Stadler <pmeerw@pmeerw.net>
Cc: Rob Herring <robh+dt@kernel.org>
Cc: <devicetree@vger.kernel.org>
Cc: Douglas Anderson <dianders@chromium.org>
Cc: Gwendal Grignou <gwendal@chromium.org>
Cc: Evan Green <evgreen@chromium.org>
Signed-off-by: Stephen Boyd <swboyd@chromium.org>
---
 .../iio/proximity/semtech,sx9310.yaml         | 61 +++++++++++++++++++
 1 file changed, 61 insertions(+)

diff --git a/Documentation/devicetree/bindings/iio/proximity/semtech,sx9310.yaml b/Documentation/devicetree/bindings/iio/proximity/semtech,sx9310.yaml
index 5739074d3592..a85b8fa25861 100644
--- a/Documentation/devicetree/bindings/iio/proximity/semtech,sx9310.yaml
+++ b/Documentation/devicetree/bindings/iio/proximity/semtech,sx9310.yaml
@@ -40,6 +40,61 @@ properties:
   "#io-channel-cells":
     const: 1
 
+  semtech,cs0-ground:
+    description: Indicates the CS0 sensor is connected to ground.
+    type: boolean
+
+  semtech,combined-sensors:
+    $ref: /schemas/types.yaml#/definitions/uint32-array
+    description: |
+      List of which sensors are combined and represented by CS3.
+      Possible values are -
+      3        - CS3 (internal)
+      0 1      - CS0 + CS1
+      1 2      - CS1 + CS2 (default)
+      0 1 2 3  - CS0 + CS1 + CS2 + CS3
+    minItems: 1
+    maxItems: 4
+
+  semtech,resolution:
+    description:
+      Capacitance measure resolution. Refer to datasheet for more details.
+    enum:
+      - coarsest
+      - very-coarse
+      - coarse
+      - medium-coarse
+      - medium
+      - fine
+      - very-fine
+      - finest
+
+  semtech,startup-sensor:
+    $ref: /schemas/types.yaml#definitions/uint32
+    enum: [0, 1, 2, 3]
+    default: 0
+    description:
+      Sensor used for start-up proximity detection. The combined
+      sensor is represented by the value 3. This is used for initial
+      compensation.
+
+  semtech,proxraw-strength:
+    $ref: /schemas/types.yaml#definitions/uint32
+    enum: [0, 2, 4, 8]
+    default: 2
+    description:
+      PROXRAW filter strength. A value of 0 represents off, and other values
+      represent 1-1/N.
+
+  semtech,avg-pos-strength:
+    $ref: /schemas/types.yaml#definitions/uint32
+    enum: [0, 16, 64, 128, 256, 512, 1024, 4294967295]
+    default: 16
+    description:
+      Average positive filter strength. A value of 0 represents off and
+      UINT_MAX (4294967295) represents infinite. Other values
+      represent 1-1/N.
+
 required:
   - compatible
   - reg
@@ -61,5 +116,11 @@ examples:
         vdd-supply = <&pp3300_a>;
         svdd-supply = <&pp1800_prox>;
         #io-channel-cells = <1>;
+        semtech,cs0-ground;
+        semtech,combined-sensors = <1 2 3>;
+        semtech,resolution = "fine";
+        semtech,startup-sensor = <1>;
+        semtech,proxraw-strength = <2>;
+        semtech,avg-pos-strength = <64>;
       };
     };
-- 
Sent by a computer, using git, on the internet

[PATCH v2 6/6] iio: sx9310: Set various settings from DT

[Stephen Boyd]

These properties need to be set during driver probe. Parse any DT
properties and replace the default register settings with the ones
parsed from DT.

Cc: Daniel Campello <campello@chromium.org>
Cc: Lars-Peter Clausen <lars@metafoo.de>
Cc: Peter Meerwald-Stadler <pmeerw@pmeerw.net>
Cc: Rob Herring <robh+dt@kernel.org>
Cc: <devicetree@vger.kernel.org>
Cc: Douglas Anderson <dianders@chromium.org>
Cc: Gwendal Grignou <gwendal@chromium.org>
Cc: Evan Green <evgreen@chromium.org>
Signed-off-by: Stephen Boyd <swboyd@chromium.org>
---
 drivers/iio/proximity/sx9310.c | 141 ++++++++++++++++++++++++++++++++-
 1 file changed, 140 insertions(+), 1 deletion(-)

diff --git a/drivers/iio/proximity/sx9310.c b/drivers/iio/proximity/sx9310.c
index 3f909177eca9..1e9a4a8bc717 100644
--- a/drivers/iio/proximity/sx9310.c
+++ b/drivers/iio/proximity/sx9310.c
@@ -49,23 +49,42 @@
 #define   SX9310_REG_PROX_CTRL0_SCANPERIOD_15MS		0x01
 #define SX9310_REG_PROX_CTRL1				0x11
 #define SX9310_REG_PROX_CTRL2				0x12
+#define   SX9310_REG_PROX_CTRL2_COMBMODE_MASK		GENMASK(7, 6)
+#define   SX9310_REG_PROX_CTRL2_COMBMODE_CS0_CS1_CS2_CS3 (0x03 << 6)
 #define   SX9310_REG_PROX_CTRL2_COMBMODE_CS1_CS2	(0x02 << 6)
+#define   SX9310_REG_PROX_CTRL2_COMBMODE_CS0_CS1	(0x01 << 6)
+#define   SX9310_REG_PROX_CTRL2_COMBMODE_CS3		(0x00 << 6)
+#define   SX9310_REG_PROX_CTRL2_SHIELDEN_MASK		GENMASK(3, 2)
 #define   SX9310_REG_PROX_CTRL2_SHIELDEN_DYNAMIC	(0x01 << 2)
+#define   SX9310_REG_PROX_CTRL2_SHIELDEN_GROUND		(0x02 << 2)
 #define SX9310_REG_PROX_CTRL3				0x13
 #define   SX9310_REG_PROX_CTRL3_GAIN0_MASK		GENMASK(3, 2)
 #define   SX9310_REG_PROX_CTRL3_GAIN0_X8		(0x03 << 2)
 #define   SX9310_REG_PROX_CTRL3_GAIN12_MASK		GENMASK(1, 0)
 #define   SX9310_REG_PROX_CTRL3_GAIN12_X4		0x02
 #define SX9310_REG_PROX_CTRL4				0x14
+#define   SX9310_REG_PROX_CTRL4_RESOLUTION_MASK		GENMASK(2, 0)
 #define   SX9310_REG_PROX_CTRL4_RESOLUTION_FINEST	0x07
+#define   SX9310_REG_PROX_CTRL4_RESOLUTION_VERY_FINE	0x06
+#define   SX9310_REG_PROX_CTRL4_RESOLUTION_FINE		0x05
+#define   SX9310_REG_PROX_CTRL4_RESOLUTION_MEDIUM	0x04
+#define   SX9310_REG_PROX_CTRL4_RESOLUTION_MEDIUM_COARSE 0x03
+#define   SX9310_REG_PROX_CTRL4_RESOLUTION_COARSE	0x02
+#define   SX9310_REG_PROX_CTRL4_RESOLUTION_VERY_COARSE	0x01
+#define   SX9310_REG_PROX_CTRL4_RESOLUTION_COARSEST	0x00
 #define SX9310_REG_PROX_CTRL5				0x15
 #define   SX9310_REG_PROX_CTRL5_RANGE_SMALL		(0x03 << 6)
+#define   SX9310_REG_PROX_CTRL5_STARTUPSENS_MASK	GENMASK(3, 2)
 #define   SX9310_REG_PROX_CTRL5_STARTUPSENS_CS1		(0x01 << 2)
+#define   SX9310_REG_PROX_CTRL5_RAWFILT_MASK		GENMASK(1, 0)
+#define   SX9310_REG_PROX_CTRL5_RAWFILT_SHIFT		0
 #define   SX9310_REG_PROX_CTRL5_RAWFILT_1P25		0x02
 #define SX9310_REG_PROX_CTRL6				0x16
 #define   SX9310_REG_PROX_CTRL6_AVGTHRESH_DEFAULT	0x20
 #define SX9310_REG_PROX_CTRL7				0x17
 #define   SX9310_REG_PROX_CTRL7_AVGNEGFILT_2		(0x01 << 3)
+#define   SX9310_REG_PROX_CTRL7_AVGPOSFILT_MASK		GENMASK(2, 0)
+#define   SX9310_REG_PROX_CTRL7_AVGPOSFILT_SHIFT	0
 #define   SX9310_REG_PROX_CTRL7_AVGPOSFILT_512		0x05
 #define SX9310_REG_PROX_CTRL8				0x18
 #define   SX9310_REG_PROX_CTRL8_9_PTHRESH_MASK		GENMASK(7, 3)
@@ -1193,9 +1212,129 @@ static int sx9310_init_compensation(struct iio_dev *indio_dev)
 	return ret;
 }
 
+static const struct sx9310_reg_default *
+sx9310_get_default_reg(struct sx9310_data *data, int i,
+		       struct sx9310_reg_default *reg_def)
+{
+	int ret;
+	const struct device_node *np = data->client->dev.of_node;
+	u32 combined[SX9310_NUM_CHANNELS] = { 4, 4, 4, 4 };
+	unsigned long comb_mask = 0;
+	const char *res;
+	u32 start = 0, raw = 0, pos = 0;
+
+	memcpy(reg_def, &sx9310_default_regs[i], sizeof(*reg_def));
+	if (!np)
+		return reg_def;
+
+	switch (reg_def->reg) {
+	case SX9310_REG_PROX_CTRL2:
+		if (of_property_read_bool(np, "semtech,cs0-ground")) {
+			reg_def->def &= ~SX9310_REG_PROX_CTRL2_SHIELDEN_MASK;
+			reg_def->def |= SX9310_REG_PROX_CTRL2_SHIELDEN_GROUND;
+		}
+
+		reg_def->def &= ~SX9310_REG_PROX_CTRL2_COMBMODE_MASK;
+		of_property_read_u32_array(np, "semtech,combined-sensors",
+					   combined, ARRAY_SIZE(combined));
+		for (i = 0; i < ARRAY_SIZE(combined); i++) {
+			if (combined[i] <= SX9310_NUM_CHANNELS)
+				comb_mask |= BIT(combined[i]);
+		}
+
+		comb_mask &= 0xf;
+		if (comb_mask == (BIT(3) | BIT(2) | BIT(1) | BIT(0)))
+			reg_def->def |= SX9310_REG_PROX_CTRL2_COMBMODE_CS0_CS1_CS2_CS3;
+		else if (comb_mask == (BIT(1) | BIT(2)))
+			reg_def->def |= SX9310_REG_PROX_CTRL2_COMBMODE_CS1_CS2;
+		else if (comb_mask == (BIT(0) | BIT(1)))
+			reg_def->def |= SX9310_REG_PROX_CTRL2_COMBMODE_CS0_CS1;
+		else if (comb_mask == BIT(3))
+			reg_def->def |= SX9310_REG_PROX_CTRL2_COMBMODE_CS3;
+
+		break;
+	case SX9310_REG_PROX_CTRL4:
+		ret = of_property_read_string(np, "semtech,resolution", &res);
+		if (ret)
+			break;
+
+		reg_def->def &= ~SX9310_REG_PROX_CTRL4_RESOLUTION_MASK;
+		if (!strcmp(res, "coarsest"))
+			reg_def->def |= SX9310_REG_PROX_CTRL4_RESOLUTION_COARSEST;
+		else if (!strcmp(res, "very-coarse"))
+			reg_def->def |= SX9310_REG_PROX_CTRL4_RESOLUTION_VERY_COARSE;
+		else if (!strcmp(res, "coarse"))
+			reg_def->def |= SX9310_REG_PROX_CTRL4_RESOLUTION_COARSE;
+		else if (!strcmp(res, "medium-coarse"))
+			reg_def->def |= SX9310_REG_PROX_CTRL4_RESOLUTION_MEDIUM_COARSE;
+		else if (!strcmp(res, "medium"))
+			reg_def->def |= SX9310_REG_PROX_CTRL4_RESOLUTION_MEDIUM;
+		else if (!strcmp(res, "fine"))
+			reg_def->def |= SX9310_REG_PROX_CTRL4_RESOLUTION_FINE;
+		else if (!strcmp(res, "very-fine"))
+			reg_def->def |= SX9310_REG_PROX_CTRL4_RESOLUTION_VERY_FINE;
+		else if (!strcmp(res, "finest"))
+			reg_def->def |= SX9310_REG_PROX_CTRL4_RESOLUTION_FINEST;
+
+		break;
+	case SX9310_REG_PROX_CTRL5:
+		ret = of_property_read_u32(np, "semtech,startup-sensor", &start);
+		if (ret) {
+			start = FIELD_GET(SX9310_REG_PROX_CTRL5_STARTUPSENS_MASK,
+					  reg_def->def);
+		}
+
+		reg_def->def &= ~SX9310_REG_PROX_CTRL5_STARTUPSENS_MASK;
+		reg_def->def |= FIELD_PREP(SX9310_REG_PROX_CTRL5_STARTUPSENS_MASK,
+					   start);
+
+		ret = of_property_read_u32(np, "semtech,proxraw-strength", &raw);
+		if (ret) {
+			raw = FIELD_GET(SX9310_REG_PROX_CTRL5_RAWFILT_MASK,
+					reg_def->def);
+		} else {
+			raw = ilog2(raw);
+		}
+
+		reg_def->def &= ~SX9310_REG_PROX_CTRL5_RAWFILT_MASK;
+		reg_def->def |= FIELD_PREP(SX9310_REG_PROX_CTRL5_RAWFILT_MASK,
+					   raw);
+		break;
+	case SX9310_REG_PROX_CTRL7:
+		ret = of_property_read_u32(np, "semtech,avg-pos-strength", &pos);
+		if (ret)
+			break;
+
+		if (pos > 1024)
+			pos = 0x7;
+		else if (pos == 1024)
+			pos = 0x6;
+		else if (pos == 512)
+			pos = 0x5;
+		else if (pos == 256)
+			pos = 0x4;
+		else if (pos == 128)
+			pos = 0x3;
+		else if (pos == 64)
+			pos = 0x2;
+		else if (pos == 16)
+			pos = 0x1;
+		else
+			pos = 0x0;
+
+		reg_def->def &= ~SX9310_REG_PROX_CTRL7_AVGPOSFILT_MASK;
+		reg_def->def |= FIELD_PREP(SX9310_REG_PROX_CTRL7_AVGPOSFILT_MASK,
+					   pos);
+		break;
+	}
+
+	return reg_def;
+}
+
 static int sx9310_init_device(struct iio_dev *indio_dev)
 {
 	struct sx9310_data *data = iio_priv(indio_dev);
+	struct sx9310_reg_default tmp;
 	const struct sx9310_reg_default *initval;
 	int ret;
 	unsigned int i, val;
@@ -1213,7 +1352,7 @@ static int sx9310_init_device(struct iio_dev *indio_dev)
 
 	/* Program some sane defaults. */
 	for (i = 0; i < ARRAY_SIZE(sx9310_default_regs); i++) {
-		initval = &sx9310_default_regs[i];
+		initval = sx9310_get_default_reg(data, i, &tmp);
 		ret = regmap_write(data->regmap, initval->reg, initval->def);
 		if (ret)
 			return ret;
-- 
Sent by a computer, using git, on the internet

Re: [PATCH v2 5/6] dt-bindings: iio: sx9310: Add various settings as DT properties

[Rob Herring]

On Wed, Sep 30, 2020 at 12:57:27AM -0700, Stephen Boyd wrote:
> We need to set various bits in the hardware registers for this device to
> operate properly depending on how it is installed. Add a handful of DT
> properties to configure these things.
> 
> Cc: Daniel Campello <campello@chromium.org>
> Cc: Lars-Peter Clausen <lars@metafoo.de>
> Cc: Peter Meerwald-Stadler <pmeerw@pmeerw.net>
> Cc: Rob Herring <robh+dt@kernel.org>
> Cc: <devicetree@vger.kernel.org>
> Cc: Douglas Anderson <dianders@chromium.org>
> Cc: Gwendal Grignou <gwendal@chromium.org>
> Cc: Evan Green <evgreen@chromium.org>
> Signed-off-by: Stephen Boyd <swboyd@chromium.org>
> ---
>  .../iio/proximity/semtech,sx9310.yaml         | 61 +++++++++++++++++++
>  1 file changed, 61 insertions(+)
> 
> diff --git a/Documentation/devicetree/bindings/iio/proximity/semtech,sx9310.yaml b/Documentation/devicetree/bindings/iio/proximity/semtech,sx9310.yaml
> index 5739074d3592..a85b8fa25861 100644
> --- a/Documentation/devicetree/bindings/iio/proximity/semtech,sx9310.yaml
> +++ b/Documentation/devicetree/bindings/iio/proximity/semtech,sx9310.yaml
> @@ -40,6 +40,61 @@ properties:
>    "#io-channel-cells":
>      const: 1
>  
> +  semtech,cs0-ground:
> +    description: Indicates the CS0 sensor is connected to ground.
> +    type: boolean
> +
> +  semtech,combined-sensors:
> +    $ref: /schemas/types.yaml#/definitions/uint32-array
> +    description: |
> +      List of which sensors are combined and represented by CS3.
> +      Possible values are -
> +      3        - CS3 (internal)
> +      0 1      - CS0 + CS1
> +      1 2      - CS1 + CS2 (default)
> +      0 1 2 3  - CS0 + CS1 + CS2 + CS3

       items:
         enum: [ 0, 1, 2, 3 ]

With that,

Reviewed-by: Rob Herring <robh@kernel.org>

> +    minItems: 1
> +    maxItems: 4
> +
> +  semtech,resolution:
> +    description:
> +      Capacitance measure resolution. Refer to datasheet for more details.
> +    enum:
> +      - coarsest
> +      - very-coarse
> +      - coarse
> +      - medium-coarse
> +      - medium
> +      - fine
> +      - very-fine
> +      - finest
> +
> +  semtech,startup-sensor:
> +    $ref: /schemas/types.yaml#definitions/uint32
> +    enum: [0, 1, 2, 3]
> +    default: 0
> +    description:
> +      Sensor used for start-up proximity detection. The combined
> +      sensor is represented by the value 3. This is used for initial
> +      compensation.
> +
> +  semtech,proxraw-strength:
> +    $ref: /schemas/types.yaml#definitions/uint32
> +    enum: [0, 2, 4, 8]
> +    default: 2
> +    description:
> +      PROXRAW filter strength. A value of 0 represents off, and other values
> +      represent 1-1/N.
> +
> +  semtech,avg-pos-strength:
> +    $ref: /schemas/types.yaml#definitions/uint32
> +    enum: [0, 16, 64, 128, 256, 512, 1024, 4294967295]
> +    default: 16
> +    description:
> +      Average positive filter strength. A value of 0 represents off and
> +      UINT_MAX (4294967295) represents infinite. Other values
> +      represent 1-1/N.
> +
>  required:
>    - compatible
>    - reg
> @@ -61,5 +116,11 @@ examples:
>          vdd-supply = <&pp3300_a>;
>          svdd-supply = <&pp1800_prox>;
>          #io-channel-cells = <1>;
> +        semtech,cs0-ground;
> +        semtech,combined-sensors = <1 2 3>;
> +        semtech,resolution = "fine";
> +        semtech,startup-sensor = <1>;
> +        semtech,proxraw-strength = <2>;
> +        semtech,avg-pos-strength = <64>;
>        };
>      };
> -- 
> Sent by a computer, using git, on the internet
>