From: Sakari Ailus <sakari.ailus@linux.intel.com>
To: linux-media@vger.kernel.org
Subject: [PATCH 000/100] CCS driver
Date: Wed, 30 Sep 2020 18:27:18 +0300 [thread overview]
Message-ID: <20200930152858.8471-1-sakari.ailus@linux.intel.com> (raw)
Hello everyone,
Here's a set of patches that turn the existing SMIA driver into a MIPI CCS
driver while maintaining SMIA support. A number of bugs in the existing
code are fixed in this set, too.
The changes at this point are primarily focused on dealing with new
mandatory driver features related to PLL configuration (as CCS allows for
much more variation there) and things such as integer conversion from
U16.U16 format instead of float. There are some other new features as well
such as digital gain and support for getting device specific analogue gain
coefficients.
A new feature in CCS is CCS static data which makes it possible to obtain
sensor's capabilities and limits from a file chosen based on sensor
identification. CCS static data is used also for storing MSR registers so
supporting new, CCS compliant devices requires no driver changes.
Note that the library as well as the register definitions are dual
licensed under GNU GPL v2 OR BSD 3-clause licenses for use outside the
Linux kernel.
Also DT bindings are updated accordingly and converted to YAML format.
More information on MIPI CCS can be found here:
<URL:https://www.mipi.org/specifications/camera-command-set>
Comments are welcome.
Sakari Ailus (100):
smiapp: Add CCS register definitions and limits
smiapp: Use CCS register flags
smiapp: Calculate CCS limit offsets and limit buffer size
smiapp: Remove macros for defining registers, merge definitions
smiapp: Add macros for accessing CCS registers
smiapp: Use MIPI CCS version and manufacturer ID information
smiapp: Read CCS limit values
smiapp: Switch to CCS limits
smiapp: Obtain frame descriptor from CCS limits
smiapp: Use CCS limits in reading data format descriptors
smiapp: Use CCS limits in reading binning capabilities
smiapp: Use CCS registers
smiapp: Remove quirk function for writing a single 8-bit register
smiapp: Rename register access functions
smiapp: Internal rename to CCS
smiapp: Differentiate CCS sensors from SMIA in subdev naming
smiapp: Rename as "ccs"
ccs: Remove profile concept
ccs: Give all subdevs a function
dt-bindings: Add vendor prefix for MIPI Alliance
dt-bindings: nokia,smia: Fix link-frequencies documentation
dt-bindings: nokia,smia: Make vana-supply optional
dt-bindings: nokia,smia: Convert to YAML
dt-bindings: nokia,smia: Use better active polarity for reset
dt-bindings: Amend SMIA bindings with MIPI CCS support
dt-bindings: Add bus-type for C-PHY support
ccs: Request for "reset" GPIO
ccs: Add "mipi,ccs" compatible string
ccs: Remove the I²C ID table
ccs: Remove remaining support for platform data
ccs: Make hwcfg part of the device specific struct
ccs: Add CCS static data parser library
ccs: Combine revision number major and minor into one
ccs: Read CCS static data from firmware binaries
ccs: Stop reading arrays after the first zero
ccs: The functions to get compose or crop rectangle never return NULL
ccs: Replace somewhat harsh internal checks based on BUG with WARN_ON
ccs: Refactor register reading a little
ccs: Make real to integer number conversion optional
ccs: Move limit value real to integer conversion from read to access
time
ccs: Read ireal numbers correctly
smiapp-pll: Rename as ccs-pll
ccs: Change my e-mail address
ccs: Add support for manufacturer regs from sensor and module files
ccs: Use static data read-only registers
ccs: Clean up runtime PM usage
ccs: Wrap long lines, unwrap short ones
ccs: Add device compatible identifiers for telling SMIA and CCS apart
ccs: Use longer pre-I²C sleep for CCS compliant devices
ccs-pll: Don't use div_u64 to divide a 32-bit number
ccs-pll: Split limits and PLL configuration into front and back parts
ccs-pll: Use correct VT divisor for calculating VT SYS divisor
ccs-pll: End search if there are no better values available
ccs-pll: Remove parallel bus support
ccs-pll: Differentiate between CSI-2 D-PHY and C-PHY
ccs-pll: Move the flags field down, away from 8-bit fields
ccs-pll: Document the structs in the header as well as the function
ccs-pll: Use the BIT macro
ccs-pll: Begin calculation from OP system clock frequency
ccs-pll: Fix condition for pre-PLL divider lower bound
ccs-pll: Avoid overflow in pre-PLL divisor lower bound search
ccs-pll: Fix comment on check against maximum PLL multiplier
ccs-pll: Fix check for PLL multiplier upper bound
ccs-pll: Use explicit 32-bit unsigned type
ccs-pll: Add support for lane speed model
ccs: Add support for lane speed model
ccs-pll: Add support for decoupled OP domain calculation
ccs-pll: Add support for extended input PLL clock divider
ccs-pll: Support two cycles per pixel on OP domain
ccs-pll: Add support flexible OP PLL pixel clock divider
ccs-pll: Add sanity checks
ccs-pll: Add C-PHY support
ccs-pll: Split off VT subtree calculation
ccs-pll: Check for derating and overrating, support non-derating
sensors
ccs-pll: Better separate OP and VT sub-tree calculation
ccs-pll: Print relevant information on PLL tree
ccs-pll: Rework bounds checks
ccs-pll: Make VT divisors 16-bit
ccs-pll: Fix VT post-PLL divisor calculation
ccs-pll: Separate VT divisor limit calculation from the rest
ccs-pll: Add trivial dual PLL support
ccs: Dual PLL support
ccs-pll: Add support for DDR OP system and pixel clocks
ccs: Add support for DDR OP SYS and OP PIX clocks
ccs: Print written register values
ccs-pll: Print pixel rates
ccs: Add support for obtaining C-PHY configuration from firmware
ccs: Add digital gain support
ccs: Add support for old-style SMIA digital gain
ccs: Remove analogue gain field
ccs: Only add analogue gain control if the device supports it
v4l: Add user control base for CCS controls
v4l: uapi: Add controls for analogue gain constants
ccs: Add support for analogue gain coefficient controls
v4l: uapi: Add controls for CCS alternative analogue gain
ccs: Add support for alternate analogue global gain
ccs: Add debug prints for MSR registers
v4l: uapi: Add CCS controls for correction configuration and
capabilities
ccs: Add shading correction and luminance correction level controls
smiapp: Add CCS ACPI device ID
.../bindings/media/i2c/mipi,ccs.yaml | 164 +
.../bindings/media/i2c/nokia,smia.txt | 66 -
.../devicetree/bindings/vendor-prefixes.yaml | 2 +
MAINTAINERS | 20 +-
drivers/media/i2c/Kconfig | 4 +-
drivers/media/i2c/Makefile | 4 +-
drivers/media/i2c/ccs-pll.c | 885 ++++
drivers/media/i2c/ccs-pll.h | 211 +
drivers/media/i2c/ccs/Kconfig | 11 +
drivers/media/i2c/ccs/Makefile | 6 +
drivers/media/i2c/ccs/ccs-core.c | 3665 +++++++++++++++++
drivers/media/i2c/ccs/ccs-data-defs.h | 215 +
drivers/media/i2c/ccs/ccs-data.c | 949 +++++
drivers/media/i2c/ccs/ccs-data.h | 116 +
drivers/media/i2c/ccs/ccs-limits.c | 239 ++
drivers/media/i2c/ccs/ccs-limits.h | 258 ++
drivers/media/i2c/ccs/ccs-os.h | 15 +
.../smiapp-quirk.c => ccs/ccs-quirk.c} | 105 +-
.../smiapp-quirk.h => ccs/ccs-quirk.h} | 54 +-
drivers/media/i2c/ccs/ccs-reg-access.c | 417 ++
drivers/media/i2c/ccs/ccs-reg-access.h | 42 +
drivers/media/i2c/ccs/ccs-regs.h | 953 +++++
.../media/i2c/{smiapp/smiapp.h => ccs/ccs.h} | 183 +-
drivers/media/i2c/ccs/smiapp-reg-defs.h | 582 +++
drivers/media/i2c/smiapp-pll.c | 482 ---
drivers/media/i2c/smiapp-pll.h | 99 -
drivers/media/i2c/smiapp/Kconfig | 10 -
drivers/media/i2c/smiapp/Makefile | 6 -
drivers/media/i2c/smiapp/smiapp-core.c | 3173 --------------
drivers/media/i2c/smiapp/smiapp-limits.c | 118 -
drivers/media/i2c/smiapp/smiapp-limits.h | 114 -
drivers/media/i2c/smiapp/smiapp-reg-defs.h | 489 ---
drivers/media/i2c/smiapp/smiapp-reg.h | 116 -
drivers/media/i2c/smiapp/smiapp-regs.c | 261 --
drivers/media/i2c/smiapp/smiapp-regs.h | 36 -
include/uapi/linux/ccs.h | 21 +
include/uapi/linux/v4l2-controls.h | 6 +
37 files changed, 8939 insertions(+), 5158 deletions(-)
create mode 100644 Documentation/devicetree/bindings/media/i2c/mipi,ccs.yaml
delete mode 100644 Documentation/devicetree/bindings/media/i2c/nokia,smia.txt
create mode 100644 drivers/media/i2c/ccs-pll.c
create mode 100644 drivers/media/i2c/ccs-pll.h
create mode 100644 drivers/media/i2c/ccs/Kconfig
create mode 100644 drivers/media/i2c/ccs/Makefile
create mode 100644 drivers/media/i2c/ccs/ccs-core.c
create mode 100644 drivers/media/i2c/ccs/ccs-data-defs.h
create mode 100644 drivers/media/i2c/ccs/ccs-data.c
create mode 100644 drivers/media/i2c/ccs/ccs-data.h
create mode 100644 drivers/media/i2c/ccs/ccs-limits.c
create mode 100644 drivers/media/i2c/ccs/ccs-limits.h
create mode 100644 drivers/media/i2c/ccs/ccs-os.h
rename drivers/media/i2c/{smiapp/smiapp-quirk.c => ccs/ccs-quirk.c} (63%)
rename drivers/media/i2c/{smiapp/smiapp-quirk.h => ccs/ccs-quirk.h} (53%)
create mode 100644 drivers/media/i2c/ccs/ccs-reg-access.c
create mode 100644 drivers/media/i2c/ccs/ccs-reg-access.h
create mode 100644 drivers/media/i2c/ccs/ccs-regs.h
rename drivers/media/i2c/{smiapp/smiapp.h => ccs/ccs.h} (53%)
create mode 100644 drivers/media/i2c/ccs/smiapp-reg-defs.h
delete mode 100644 drivers/media/i2c/smiapp-pll.c
delete mode 100644 drivers/media/i2c/smiapp-pll.h
delete mode 100644 drivers/media/i2c/smiapp/Kconfig
delete mode 100644 drivers/media/i2c/smiapp/Makefile
delete mode 100644 drivers/media/i2c/smiapp/smiapp-core.c
delete mode 100644 drivers/media/i2c/smiapp/smiapp-limits.c
delete mode 100644 drivers/media/i2c/smiapp/smiapp-limits.h
delete mode 100644 drivers/media/i2c/smiapp/smiapp-reg-defs.h
delete mode 100644 drivers/media/i2c/smiapp/smiapp-reg.h
delete mode 100644 drivers/media/i2c/smiapp/smiapp-regs.c
delete mode 100644 drivers/media/i2c/smiapp/smiapp-regs.h
create mode 100644 include/uapi/linux/ccs.h
--
2.27.0
next reply other threads:[~2020-09-30 15:30 UTC|newest]
Thread overview: 101+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-09-30 15:27 Sakari Ailus [this message]
2020-09-30 15:27 ` [PATCH 001/100] smiapp: Add CCS register definitions and limits Sakari Ailus
2020-09-30 15:27 ` [PATCH 002/100] smiapp: Use CCS register flags Sakari Ailus
2020-09-30 15:27 ` [PATCH 003/100] smiapp: Calculate CCS limit offsets and limit buffer size Sakari Ailus
2020-09-30 15:27 ` [PATCH 004/100] smiapp: Remove macros for defining registers, merge definitions Sakari Ailus
2020-09-30 15:27 ` [PATCH 005/100] smiapp: Add macros for accessing CCS registers Sakari Ailus
2020-09-30 15:27 ` [PATCH 006/100] smiapp: Use MIPI CCS version and manufacturer ID information Sakari Ailus
2020-09-30 15:27 ` [PATCH 007/100] smiapp: Read CCS limit values Sakari Ailus
2020-09-30 15:27 ` [PATCH 008/100] smiapp: Switch to CCS limits Sakari Ailus
2020-09-30 15:27 ` [PATCH 009/100] smiapp: Obtain frame descriptor from " Sakari Ailus
2020-09-30 15:27 ` [PATCH 010/100] smiapp: Use CCS limits in reading data format descriptors Sakari Ailus
2020-09-30 15:27 ` [PATCH 011/100] smiapp: Use CCS limits in reading binning capabilities Sakari Ailus
2020-09-30 15:27 ` [PATCH 012/100] smiapp: Use CCS registers Sakari Ailus
2020-09-30 15:27 ` [PATCH 013/100] smiapp: Remove quirk function for writing a single 8-bit register Sakari Ailus
2020-09-30 15:27 ` [PATCH 014/100] smiapp: Rename register access functions Sakari Ailus
2020-09-30 15:27 ` [PATCH 015/100] smiapp: Internal rename to CCS Sakari Ailus
2020-09-30 15:27 ` [PATCH 016/100] smiapp: Differentiate CCS sensors from SMIA in subdev naming Sakari Ailus
2020-09-30 15:27 ` [PATCH 017/100] smiapp: Rename as "ccs" Sakari Ailus
2020-09-30 15:27 ` [PATCH 018/100] ccs: Remove profile concept Sakari Ailus
2020-09-30 15:27 ` [PATCH 019/100] ccs: Give all subdevs a function Sakari Ailus
2020-09-30 15:27 ` [PATCH 020/100] dt-bindings: Add vendor prefix for MIPI Alliance Sakari Ailus
2020-09-30 15:27 ` [PATCH 021/100] dt-bindings: nokia,smia: Fix link-frequencies documentation Sakari Ailus
2020-09-30 15:27 ` [PATCH 022/100] dt-bindings: nokia,smia: Make vana-supply optional Sakari Ailus
2020-09-30 15:27 ` [PATCH 023/100] dt-bindings: nokia,smia: Convert to YAML Sakari Ailus
2020-09-30 15:27 ` [PATCH 024/100] dt-bindings: nokia,smia: Use better active polarity for reset Sakari Ailus
2020-09-30 15:27 ` [PATCH 025/100] dt-bindings: Amend SMIA bindings with MIPI CCS support Sakari Ailus
2020-09-30 15:27 ` [PATCH 026/100] dt-bindings: Add bus-type for C-PHY support Sakari Ailus
2020-09-30 15:27 ` [PATCH 027/100] ccs: Request for "reset" GPIO Sakari Ailus
2020-09-30 15:27 ` [PATCH 028/100] ccs: Add "mipi,ccs" compatible string Sakari Ailus
2020-09-30 15:27 ` [PATCH 029/100] ccs: Remove the I²C ID table Sakari Ailus
2020-09-30 15:27 ` [PATCH 030/100] ccs: Remove remaining support for platform data Sakari Ailus
2020-09-30 15:27 ` [PATCH 031/100] ccs: Make hwcfg part of the device specific struct Sakari Ailus
2020-09-30 15:27 ` [PATCH 032/100] ccs: Add CCS static data parser library Sakari Ailus
2020-09-30 15:27 ` [PATCH 033/100] ccs: Combine revision number major and minor into one Sakari Ailus
2020-09-30 15:27 ` [PATCH 034/100] ccs: Read CCS static data from firmware binaries Sakari Ailus
2020-09-30 15:27 ` [PATCH 035/100] ccs: Stop reading arrays after the first zero Sakari Ailus
2020-09-30 15:27 ` [PATCH 036/100] ccs: The functions to get compose or crop rectangle never return NULL Sakari Ailus
2020-09-30 15:27 ` [PATCH 037/100] ccs: Replace somewhat harsh internal checks based on BUG with WARN_ON Sakari Ailus
2020-09-30 15:27 ` [PATCH 038/100] ccs: Refactor register reading a little Sakari Ailus
2020-09-30 15:27 ` [PATCH 039/100] ccs: Make real to integer number conversion optional Sakari Ailus
2020-09-30 15:27 ` [PATCH 040/100] ccs: Move limit value real to integer conversion from read to access time Sakari Ailus
2020-09-30 15:27 ` [PATCH 041/100] ccs: Read ireal numbers correctly Sakari Ailus
2020-09-30 15:28 ` [PATCH 042/100] smiapp-pll: Rename as ccs-pll Sakari Ailus
2020-09-30 15:28 ` [PATCH 043/100] ccs: Change my e-mail address Sakari Ailus
2020-09-30 15:28 ` [PATCH 044/100] ccs: Add support for manufacturer regs from sensor and module files Sakari Ailus
2020-09-30 15:28 ` [PATCH 045/100] ccs: Use static data read-only registers Sakari Ailus
2020-09-30 15:28 ` [PATCH 046/100] ccs: Clean up runtime PM usage Sakari Ailus
2020-09-30 15:28 ` [PATCH 047/100] ccs: Wrap long lines, unwrap short ones Sakari Ailus
2020-09-30 15:28 ` [PATCH 048/100] ccs: Add device compatible identifiers for telling SMIA and CCS apart Sakari Ailus
2020-09-30 15:28 ` [PATCH 049/100] ccs: Use longer pre-I²C sleep for CCS compliant devices Sakari Ailus
2020-09-30 15:28 ` [PATCH 050/100] ccs-pll: Don't use div_u64 to divide a 32-bit number Sakari Ailus
2020-09-30 15:28 ` [PATCH 051/100] ccs-pll: Split limits and PLL configuration into front and back parts Sakari Ailus
2020-09-30 15:28 ` [PATCH 052/100] ccs-pll: Use correct VT divisor for calculating VT SYS divisor Sakari Ailus
2020-09-30 15:28 ` [PATCH 053/100] ccs-pll: End search if there are no better values available Sakari Ailus
2020-09-30 15:28 ` [PATCH 054/100] ccs-pll: Remove parallel bus support Sakari Ailus
2020-09-30 15:28 ` [PATCH 055/100] ccs-pll: Differentiate between CSI-2 D-PHY and C-PHY Sakari Ailus
2020-09-30 15:28 ` [PATCH 056/100] ccs-pll: Move the flags field down, away from 8-bit fields Sakari Ailus
2020-09-30 15:28 ` [PATCH 057/100] ccs-pll: Document the structs in the header as well as the function Sakari Ailus
2020-09-30 15:28 ` [PATCH 058/100] ccs-pll: Use the BIT macro Sakari Ailus
2020-09-30 15:28 ` [PATCH 059/100] ccs-pll: Begin calculation from OP system clock frequency Sakari Ailus
2020-09-30 15:28 ` [PATCH 060/100] ccs-pll: Fix condition for pre-PLL divider lower bound Sakari Ailus
2020-09-30 15:28 ` [PATCH 061/100] ccs-pll: Avoid overflow in pre-PLL divisor lower bound search Sakari Ailus
2020-09-30 15:28 ` [PATCH 062/100] ccs-pll: Fix comment on check against maximum PLL multiplier Sakari Ailus
2020-09-30 15:28 ` [PATCH 063/100] ccs-pll: Fix check for PLL multiplier upper bound Sakari Ailus
2020-09-30 15:28 ` [PATCH 064/100] ccs-pll: Use explicit 32-bit unsigned type Sakari Ailus
2020-09-30 15:28 ` [PATCH 065/100] ccs-pll: Add support for lane speed model Sakari Ailus
2020-09-30 15:28 ` [PATCH 066/100] ccs: " Sakari Ailus
2020-09-30 15:28 ` [PATCH 067/100] ccs-pll: Add support for decoupled OP domain calculation Sakari Ailus
2020-09-30 15:28 ` [PATCH 068/100] ccs-pll: Add support for extended input PLL clock divider Sakari Ailus
2020-09-30 15:28 ` [PATCH 069/100] ccs-pll: Support two cycles per pixel on OP domain Sakari Ailus
2020-09-30 15:28 ` [PATCH 070/100] ccs-pll: Add support flexible OP PLL pixel clock divider Sakari Ailus
2020-09-30 15:28 ` [PATCH 071/100] ccs-pll: Add sanity checks Sakari Ailus
2020-09-30 15:28 ` [PATCH 072/100] ccs-pll: Add C-PHY support Sakari Ailus
2020-09-30 15:28 ` [PATCH 073/100] ccs-pll: Split off VT subtree calculation Sakari Ailus
2020-09-30 15:28 ` [PATCH 074/100] ccs-pll: Check for derating and overrating, support non-derating sensors Sakari Ailus
2020-09-30 15:28 ` [PATCH 075/100] ccs-pll: Better separate OP and VT sub-tree calculation Sakari Ailus
2020-09-30 15:28 ` [PATCH 076/100] ccs-pll: Print relevant information on PLL tree Sakari Ailus
2020-09-30 15:28 ` [PATCH 077/100] ccs-pll: Rework bounds checks Sakari Ailus
2020-09-30 15:28 ` [PATCH 078/100] ccs-pll: Make VT divisors 16-bit Sakari Ailus
2020-09-30 15:28 ` [PATCH 079/100] ccs-pll: Fix VT post-PLL divisor calculation Sakari Ailus
2020-09-30 15:28 ` [PATCH 080/100] ccs-pll: Separate VT divisor limit calculation from the rest Sakari Ailus
2020-09-30 15:28 ` [PATCH 081/100] ccs-pll: Add trivial dual PLL support Sakari Ailus
2020-09-30 15:28 ` [PATCH 082/100] ccs: Dual " Sakari Ailus
2020-09-30 15:28 ` [PATCH 083/100] ccs-pll: Add support for DDR OP system and pixel clocks Sakari Ailus
2020-09-30 15:28 ` [PATCH 084/100] ccs: Add support for DDR OP SYS and OP PIX clocks Sakari Ailus
2020-09-30 15:28 ` [PATCH 085/100] ccs: Print written register values Sakari Ailus
2020-09-30 15:28 ` [PATCH 086/100] ccs-pll: Print pixel rates Sakari Ailus
2020-09-30 15:28 ` [PATCH 087/100] ccs: Add support for obtaining C-PHY configuration from firmware Sakari Ailus
2020-09-30 15:28 ` [PATCH 088/100] ccs: Add digital gain support Sakari Ailus
2020-09-30 15:28 ` [PATCH 089/100] ccs: Add support for old-style SMIA digital gain Sakari Ailus
2020-09-30 15:28 ` [PATCH 090/100] ccs: Remove analogue gain field Sakari Ailus
2020-09-30 15:28 ` [PATCH 091/100] ccs: Only add analogue gain control if the device supports it Sakari Ailus
2020-09-30 15:28 ` [PATCH 092/100] v4l: Add user control base for CCS controls Sakari Ailus
2020-09-30 15:28 ` [PATCH 093/100] v4l: uapi: Add controls for analogue gain constants Sakari Ailus
2020-09-30 15:28 ` [PATCH 094/100] ccs: Add support for analogue gain coefficient controls Sakari Ailus
2020-09-30 15:28 ` [PATCH 095/100] v4l: uapi: Add controls for CCS alternative analogue gain Sakari Ailus
2020-09-30 15:28 ` [PATCH 096/100] ccs: Add support for alternate analogue global gain Sakari Ailus
2020-09-30 15:28 ` [PATCH 097/100] ccs: Add debug prints for MSR registers Sakari Ailus
2020-09-30 15:28 ` [PATCH 098/100] v4l: uapi: Add CCS controls for correction configuration and capabilities Sakari Ailus
2020-09-30 15:28 ` [PATCH 099/100] ccs: Add shading correction and luminance correction level controls Sakari Ailus
2020-09-30 15:28 ` [PATCH 100/100] smiapp: Add CCS ACPI device ID Sakari Ailus
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20200930152858.8471-1-sakari.ailus@linux.intel.com \
--to=sakari.ailus@linux.intel.com \
--cc=linux-media@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.