All of lore.kernel.org
 help / color / mirror / Atom feed
From: Petr Tesarik <ptesarik@suse.cz>
To: Heiner Kallweit <hkallweit1@gmail.com>
Cc: Realtek linux nic maintainers <nic_swsd@realtek.com>,
	netdev@vger.kernel.org
Subject: Re: RTL8402 stops working after hibernate/resume
Date: Wed, 30 Sep 2020 19:32:59 +0200	[thread overview]
Message-ID: <20200930193231.205ee7bd@ezekiel.suse.cz> (raw)
In-Reply-To: <20200930184124.68a86b1d@ezekiel.suse.cz>

[-- Attachment #1: Type: text/plain, Size: 4200 bytes --]

Hi Heiner,

On Wed, 30 Sep 2020 18:41:24 +0200
Petr Tesarik <ptesarik@suse.cz> wrote:

> HI Heiner,
> 
> On Wed, 30 Sep 2020 17:47:15 +0200
> Heiner Kallweit <hkallweit1@gmail.com> wrote:
>[...]
> > Petr,
> > in the following I send two patches. First one is supposed to fix the freeze.
> > It also fixes another issue that existed before my ether_clk change:
> > ether_clk was disabled on suspend even if WoL is enabled. And the network
> > chip most likely needs the clock to check for WoL packets.  
> 
> Should I also check whether WoL works? Plus, it would be probably good
> if I could check whether it indeed didn't work before the change. ;-)
> 
> > Please let me know whether it fixes the freeze, then I'll add your
> >   Tested-by.  
> 
> Will do.

Here are the results:

- WoL does not work without your patch; this was tested with 5.8.4,
  because master freezes hard on load.

- I got a kernel crash when I woke up the laptop through keyboard; I am
  not sure if it is related, although I could spend some time looking
  at the resulting crash dump if you think it's worth the time.

- After applying your first patch on top of v5.9-rc6, the driver can be
  loaded, but stops working properly on suspend/resume.

- WoL still does not work, but I'm no longer getting a kernel crash at
  least. ;-)

Tested-by: Petr Tesarik <ptesarik@suse.com>

> > Second patch is a re-send of the one I sent before, it should fix
> > the rx issues after resume from suspend for you.  
> 
> All right, going to rebuild the kernel and see how it goes.

This second patch does not fix suspend/resume for me, unfortunately. The
receive is still erratic, but the behaviour is now different: some
packets are truncated, other packets are delayed by approx. 1024 ms.
Yes, 1024 may ring a bell, but I've no idea which.

HTH,
Petr T

> Stay tuned,
> Petr T
> 
> 
> > diff --git a/drivers/net/ethernet/realtek/r8169_main.c
> >   b/drivers/net/ethernet/realtek/r8169_main.c index
> >   6c7c004c2..72351c5b0 100644 ---
> >   a/drivers/net/ethernet/realtek/r8169_main.c +++
> >   b/drivers/net/ethernet/realtek/r8169_main.c @@ -2236,14 +2236,10
> >   @@ static void rtl_pll_power_down(struct rtl8169_private *tp)
> >   default: break;
> >  	}
> > -
> > -	clk_disable_unprepare(tp->clk);
> >  }
> >  
> >  static void rtl_pll_power_up(struct rtl8169_private *tp)
> >  {
> > -	clk_prepare_enable(tp->clk);
> > -
> >  	switch (tp->mac_version) {
> >  	case RTL_GIGA_MAC_VER_25 ... RTL_GIGA_MAC_VER_33:
> >  	case RTL_GIGA_MAC_VER_37:
> > @@ -4820,29 +4816,39 @@ static void rtl8169_net_suspend(struct
> >   rtl8169_private *tp) 
> >  #ifdef CONFIG_PM
> >  
> > +static int rtl8169_net_resume(struct rtl8169_private *tp)
> > +{
> > +	rtl_rar_set(tp, tp->dev->dev_addr);
> > +
> > +	if (tp->TxDescArray)
> > +		rtl8169_up(tp);
> > +
> > +	netif_device_attach(tp->dev);
> > +
> > +	return 0;
> > +}
> > +
> >  static int __maybe_unused rtl8169_suspend(struct device *device)
> >  {
> >  	struct rtl8169_private *tp = dev_get_drvdata(device);
> >  
> >  	rtnl_lock();
> >  	rtl8169_net_suspend(tp);
> > +	if (!device_may_wakeup(tp_to_dev(tp)))
> > +		clk_disable_unprepare(tp->clk);
> >  	rtnl_unlock();
> >  
> >  	return 0;
> >  }
> >  
> > -static int rtl8169_resume(struct device *device)
> > +static int __maybe_unused rtl8169_resume(struct device *device)
> >  {
> >  	struct rtl8169_private *tp = dev_get_drvdata(device);
> >  
> > -	rtl_rar_set(tp, tp->dev->dev_addr);
> > -
> > -	if (tp->TxDescArray)
> > -		rtl8169_up(tp);
> > +	if (!device_may_wakeup(tp_to_dev(tp)))
> > +		clk_prepare_enable(tp->clk);
> >  
> > -	netif_device_attach(tp->dev);
> > -
> > -	return 0;
> > +	return rtl8169_net_resume(tp);
> >  }
> >  
> >  static int rtl8169_runtime_suspend(struct device *device)
> > @@ -4868,7 +4874,7 @@ static int rtl8169_runtime_resume(struct
> >   device *device) 
> >  	__rtl8169_set_wol(tp, tp->saved_wolopts);
> >  
> > -	return rtl8169_resume(device);
> > +	return rtl8169_net_resume(tp);
> >  }
> >  
> >  static int rtl8169_runtime_idle(struct device *device)  
> 


[-- Attachment #2: Digitální podpis OpenPGP --]
[-- Type: application/pgp-signature, Size: 488 bytes --]

  parent reply	other threads:[~2020-09-30 17:33 UTC|newest]

Thread overview: 34+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-07-15  8:28 RTL8402 stops working after hibernate/resume Petr Tesarik
2020-07-15 15:22 ` Heiner Kallweit
2020-07-16  8:58   ` Petr Tesarik
2020-07-18 12:07     ` Heiner Kallweit
2020-09-03  8:41       ` Petr Tesarik
2020-09-17 14:10         ` Petr Tesarik
2020-09-23  9:57         ` Heiner Kallweit
2020-09-24 19:14           ` Petr Tesarik
2020-09-24 19:37             ` Heiner Kallweit
2020-09-24 20:12             ` Heiner Kallweit
2020-09-25  7:30               ` Petr Tesarik
2020-09-25  8:54                 ` Petr Tesarik
2020-09-25  9:44                   ` Heiner Kallweit
2020-09-25  9:52                     ` Petr Tesarik
2020-09-25 12:56                       ` Petr Tesarik
2020-09-25 14:47                         ` Heiner Kallweit
2020-09-29 19:07                           ` Petr Tesarik
2020-09-29 19:41                             ` Heiner Kallweit
2020-09-29 20:08                             ` Hans de Goede
2020-09-29 20:29                               ` Hans de Goede
2020-09-29 20:35                               ` Heiner Kallweit
2020-09-29 20:42                                 ` Heiner Kallweit
2020-09-30  9:04                                 ` Hans de Goede
2020-09-30 15:47                                   ` Heiner Kallweit
2020-09-30 16:41                                     ` Petr Tesarik
2020-09-30 17:13                                       ` Heiner Kallweit
2020-09-30 17:32                                       ` Petr Tesarik [this message]
2020-09-30 18:00                                         ` Petr Tesarik
2020-09-30 20:11                                           ` Heiner Kallweit
2020-09-30 21:44                                             ` Petr Tesarik
2020-10-01  6:14                                               ` Heiner Kallweit
2020-09-30 18:10                                     ` Petr Tesarik
2020-09-29 21:17                               ` Petr Tesarik
2020-07-15 15:25 ` Heiner Kallweit

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20200930193231.205ee7bd@ezekiel.suse.cz \
    --to=ptesarik@suse.cz \
    --cc=hkallweit1@gmail.com \
    --cc=netdev@vger.kernel.org \
    --cc=nic_swsd@realtek.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.