All of lore.kernel.org
 help / color / mirror / Atom feed
From: Kurt Kanzenbach <kurt@linutronix.de>
To: Andrew Lunn <andrew@lunn.ch>,
	Vivien Didelot <vivien.didelot@gmail.com>,
	Florian Fainelli <f.fainelli@gmail.com>,
	Vladimir Oltean <olteanv@gmail.com>
Cc: "David S. Miller" <davem@davemloft.net>,
	Jakub Kicinski <kuba@kernel.org>,
	netdev@vger.kernel.org, Rob Herring <robh+dt@kernel.org>,
	devicetree@vger.kernel.org,
	Sebastian Andrzej Siewior <bigeasy@linutronix.de>,
	Richard Cochran <richardcochran@gmail.com>,
	Kamil Alkhouri <kamil.alkhouri@hs-offenburg.de>,
	ilias.apalodimas@linaro.org, Kurt Kanzenbach <kurt@linutronix.de>
Subject: [PATCH net-next v6 0/7] Hirschmann Hellcreek DSA driver
Date: Sun,  4 Oct 2020 13:29:04 +0200	[thread overview]
Message-ID: <20201004112911.25085-1-kurt@linutronix.de> (raw)

Hi,

this series adds a DSA driver for the Hirschmann Hellcreek TSN switch
IP. Characteristics of that IP:

 * Full duplex Ethernet interface at 100/1000 Mbps on three ports
 * IEEE 802.1Q-compliant Ethernet Switch
 * IEEE 802.1Qbv Time-Aware scheduling support
 * IEEE 1588 and IEEE 802.1AS support

That IP is used e.g. in

 https://www.arrow.com/en/campaigns/arrow-kairos

Due to the hardware setup the switch driver is implemented using DSA. A special
tagging protocol is leveraged. Furthermore, this driver supports PTP and
hardware timestamping.

This version implements the DSA configure_vlan_while_not_filtering behavior by
caching any VLAN requests when vlan_filtering is not set and restoring it as
soon as it is. Due to the lack of a port forwarding matrix in hardware, VLANs
are used to reflect the initial DSA/switchdev port separation. Patch two is the
only one which changed and has to be re-reviewed. Thanks!

This work is part of the AccessTSN project: https://www.accesstsn.com/

The previous versions can be found here:

 * https://lkml.kernel.org/netdev/20200618064029.32168-1-kurt@linutronix.de/
 * https://lkml.kernel.org/netdev/20200710113611.3398-1-kurt@linutronix.de/
 * https://lkml.kernel.org/netdev/20200723081714.16005-1-kurt@linutronix.de/
 * https://lkml.kernel.org/netdev/20200820081118.10105-1-kurt@linutronix.de/
 * https://lkml.kernel.org/netdev/20200901125014.17801-1-kurt@linutronix.de/
 * https://lkml.kernel.org/netdev/20200904062739.3540-1-kurt@linutronix.de/

Changes since v5:

 * Implement configure_vlan_while_not_filtering behavior (Vladimir Oltean)
 * Minor cleanups

Changes since v4:

 * Fix W=1 compiler warnings (kernel test robot)
 * Add tags

Changes since v3:

 * Drop TAPRIO support (David Miller)
   => Switch to mutexes due to the lack of hrtimers
 * Use more specific compatible strings and add platform data (Andrew Lunn)
 * Fix Kconfig ordering (Andrew Lunn)

Changes since v2:

 * Make it compile by getting all requirements merged first (Jakub Kicinski, David Miller)
 * Use "tsn" for TSN register set (Rob Herring)
 * Fix DT binding issues (Rob Herring)

Changes since v1:

 * Code simplifications (Florian Fainelli, Vladimir Oltean)
 * Fix issues with hellcreek.yaml bindings (Florian Fainelli)
 * Clear reserved field in ptp v2 event messages (Richard Cochran)
 * Make use of generic ptp parsing function (Richard Cochran, Vladimir Oltean)
 * Fix Kconfig (Florian Fainelli)
 * Add tags (Florian Fainelli, Rob Herring, Richard Cochran) 

Changes since RFC ordered by reviewers:

 * Andrew Lunn
   * Use dev_dbg for debug messages
   * Get rid of __ function names where possible
   * Use reverse xmas tree variable ordering
   * Remove redundant/useless checks
   * Improve comments e.g. for PTP
   * Fix Kconfig ordering
   * Make LED handling more generic and provide info via DT
   * Setup advertisement of PHYs according to hardware
   * Drop debugfs patch
 * Jakub Kicinski
   * Fix compiler warnings
 * Florian Fainelli
   * Switch to YAML DT bindings
 * Richard Cochran
   * Fix typo
   * Add missing NULL checks

Kamil Alkhouri (2):
  net: dsa: hellcreek: Add PTP clock support
  net: dsa: hellcreek: Add support for hardware timestamping

Kurt Kanzenbach (5):
  net: dsa: Add tag handling for Hirschmann Hellcreek switches
  net: dsa: Add DSA driver for Hirschmann Hellcreek switches
  net: dsa: hellcreek: Add PTP status LEDs
  dt-bindings: Add vendor prefix for Hirschmann
  dt-bindings: net: dsa: Add documentation for Hellcreek switches

 .../bindings/net/dsa/hellcreek.yaml           |  127 ++
 .../devicetree/bindings/vendor-prefixes.yaml  |    2 +
 drivers/net/dsa/Kconfig                       |    2 +
 drivers/net/dsa/Makefile                      |    1 +
 drivers/net/dsa/hirschmann/Kconfig            |    9 +
 drivers/net/dsa/hirschmann/Makefile           |    5 +
 drivers/net/dsa/hirschmann/hellcreek.c        | 1371 +++++++++++++++++
 drivers/net/dsa/hirschmann/hellcreek.h        |  292 ++++
 .../net/dsa/hirschmann/hellcreek_hwtstamp.c   |  479 ++++++
 .../net/dsa/hirschmann/hellcreek_hwtstamp.h   |   58 +
 drivers/net/dsa/hirschmann/hellcreek_ptp.c    |  452 ++++++
 drivers/net/dsa/hirschmann/hellcreek_ptp.h    |   76 +
 .../platform_data/hirschmann-hellcreek.h      |   23 +
 include/net/dsa.h                             |    2 +
 net/dsa/Kconfig                               |    6 +
 net/dsa/Makefile                              |    1 +
 net/dsa/tag_hellcreek.c                       |  101 ++
 17 files changed, 3007 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/net/dsa/hellcreek.yaml
 create mode 100644 drivers/net/dsa/hirschmann/Kconfig
 create mode 100644 drivers/net/dsa/hirschmann/Makefile
 create mode 100644 drivers/net/dsa/hirschmann/hellcreek.c
 create mode 100644 drivers/net/dsa/hirschmann/hellcreek.h
 create mode 100644 drivers/net/dsa/hirschmann/hellcreek_hwtstamp.c
 create mode 100644 drivers/net/dsa/hirschmann/hellcreek_hwtstamp.h
 create mode 100644 drivers/net/dsa/hirschmann/hellcreek_ptp.c
 create mode 100644 drivers/net/dsa/hirschmann/hellcreek_ptp.h
 create mode 100644 include/linux/platform_data/hirschmann-hellcreek.h
 create mode 100644 net/dsa/tag_hellcreek.c

-- 
2.20.1


             reply	other threads:[~2020-10-04 11:30 UTC|newest]

Thread overview: 51+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-10-04 11:29 Kurt Kanzenbach [this message]
2020-10-04 11:29 ` [PATCH net-next v6 1/7] net: dsa: Add tag handling for Hirschmann Hellcreek switches Kurt Kanzenbach
2020-10-04 11:56   ` Vladimir Oltean
2020-10-05  6:14     ` Kurt Kanzenbach
2020-10-04 11:29 ` [PATCH net-next v6 2/7] net: dsa: Add DSA driver " Kurt Kanzenbach
2020-10-04 12:56   ` Vladimir Oltean
2020-10-06  6:09     ` Kurt Kanzenbach
2020-10-06  9:20       ` Vladimir Oltean
2020-10-06 10:13         ` Kurt Kanzenbach
2020-10-06 11:32           ` Vladimir Oltean
2020-10-06 12:37             ` Vladimir Oltean
2020-10-06 13:23             ` Kurt Kanzenbach
2020-10-06 13:42               ` Vladimir Oltean
2020-10-06 14:05                 ` Kurt Kanzenbach
2020-10-06 14:10                   ` Vladimir Oltean
2020-10-06 13:56               ` Vladimir Oltean
2020-10-06 14:13                 ` Kurt Kanzenbach
2020-10-11 12:29                 ` Kurt Kanzenbach
2020-10-11 15:30                   ` Vladimir Oltean
2020-10-12  5:37                     ` Kurt Kanzenbach
2020-10-16 12:11                       ` Kurt Kanzenbach
2020-10-16 15:43                         ` Vladimir Oltean
2020-10-16 16:56                           ` Florian Fainelli
2020-10-17 10:06                             ` Kurt Kanzenbach
2020-10-17 15:57                             ` Vladimir Oltean
2020-10-08 11:49           ` Vladimir Oltean
2020-10-09  5:58             ` Kurt Kanzenbach
2020-10-04 11:29 ` [PATCH net-next v6 3/7] net: dsa: hellcreek: Add PTP clock support Kurt Kanzenbach
2020-10-04 11:29 ` [PATCH net-next v6 4/7] net: dsa: hellcreek: Add support for hardware timestamping Kurt Kanzenbach
2020-10-04 14:30   ` Vladimir Oltean
2020-10-06  6:27     ` Kurt Kanzenbach
2020-10-06  7:28       ` Vladimir Oltean
2020-10-06 13:30         ` Kurt Kanzenbach
2020-10-06 13:32           ` Vladimir Oltean
2020-10-06 13:56             ` Kurt Kanzenbach
2020-10-06 14:01               ` Vladimir Oltean
2020-10-07 10:39                 ` Kurt Kanzenbach
2020-10-07 10:54                   ` Vladimir Oltean
2020-10-08  8:34                     ` Kurt Kanzenbach
2020-10-08  9:44                       ` Vladimir Oltean
2020-10-08 10:01                         ` Kurt Kanzenbach
2020-10-08 12:55                           ` Kamil Alkhouri
2020-10-08 15:09                             ` Vladimir Oltean
2020-10-12 12:53                               ` Kamil Alkhouri
2020-10-12 21:42                                 ` Richard Cochran
2020-10-14  9:57                                   ` Vladimir Oltean
2020-10-14 11:01                                     ` Richard Cochran
2020-10-14 11:37                                       ` Kurt Kanzenbach
2020-10-04 11:29 ` [PATCH net-next v6 5/7] net: dsa: hellcreek: Add PTP status LEDs Kurt Kanzenbach
2020-10-04 11:29 ` [PATCH net-next v6 6/7] dt-bindings: Add vendor prefix for Hirschmann Kurt Kanzenbach
2020-10-04 11:29 ` [PATCH net-next v6 7/7] dt-bindings: net: dsa: Add documentation for Hellcreek switches Kurt Kanzenbach

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20201004112911.25085-1-kurt@linutronix.de \
    --to=kurt@linutronix.de \
    --cc=andrew@lunn.ch \
    --cc=bigeasy@linutronix.de \
    --cc=davem@davemloft.net \
    --cc=devicetree@vger.kernel.org \
    --cc=f.fainelli@gmail.com \
    --cc=ilias.apalodimas@linaro.org \
    --cc=kamil.alkhouri@hs-offenburg.de \
    --cc=kuba@kernel.org \
    --cc=netdev@vger.kernel.org \
    --cc=olteanv@gmail.com \
    --cc=richardcochran@gmail.com \
    --cc=robh+dt@kernel.org \
    --cc=vivien.didelot@gmail.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.