All of lore.kernel.org
 help / color / mirror / Atom feed
From: Alexander Dahl <post@lespocky.de>
To: Pavel Machek <pavel@ucw.cz>, Dan Murphy <dmurphy@ti.com>,
	Rob Herring <robh+dt@kernel.org>
Cc: Alexander Dahl <ada@thorsis.com>,
	Jacek Anaszewski <jacek.anaszewski@gmail.com>,
	Alexander Dahl <post@lespocky.de>,
	linux-leds@vger.kernel.org, devicetree@vger.kernel.org,
	linux-kernel@vger.kernel.org,
	linux-arm-kernel@lists.infradead.org,
	linux-samsung-soc@vger.kernel.org, linux-omap@vger.kernel.org,
	linux-stm32@st-md-mailman.stormreply.com,
	linux-amlogic@lists.infradead.org, linux-mips@vger.kernel.org,
	Krzysztof Kozlowski <krzk@kernel.org>,
	Rob Herring <robh@kernel.org>,
	Peter Ujfalusi <peter.ujfalusi@ti.com>,
	Russell King <linux@armlinux.org.uk>
Subject: [PATCH v7 02/12] dt-bindings: leds: Convert pwm to yaml
Date: Mon,  5 Oct 2020 22:34:41 +0200	[thread overview]
Message-ID: <20201005203451.9985-3-post@lespocky.de> (raw)
In-Reply-To: <20201005203451.9985-1-post@lespocky.de>

The example was adapted in the following ways:

- make use of the now supported 'function' and 'color' properties
- remove pwm nodes, those are documented elsewhere
- align node names to new dt schema rules and dt recommendations

License was not explicitly set before.  The license set now is
recommended by DT project.

Suggested-by: Jacek Anaszewski <jacek.anaszewski@gmail.com>
Signed-off-by: Alexander Dahl <post@lespocky.de>
Reviewed-by: Krzysztof Kozlowski <krzk@kernel.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Cc: Peter Ujfalusi <peter.ujfalusi@ti.com>
Cc: Russell King <linux@armlinux.org.uk>
---

Notes:
    NOTE: Due to license set/change this needs Acked-by or Signed-off-by from:
      * Peter Ujfalusi
      * Russell King
    
    That was discussed already with Peter (original author), still waiting
    for Acked-by though …
    
    Changelog
    ---------
    v6 -> v7:
      * added Reviewed-by (Krzysztof Kozlowski)
      * reworded commit message (suggested by Krzysztof)
      * added Reviewed-by (Rob Herring)
    
    v5 -> v6:
      * removed pwm nodes from example (Rob)
      * renamed led-controller node in example (Rob)
    
    v4 -> v5:
      * updated based on feedback by Rob Herring
      * removed Acked-by
    
    v3 -> v4:
      * added Cc to original author of the binding
    
    v2 -> v3:
      * changed license identifier to recommended one
      * added Acked-by
    
    v2:
      * added this patch to series (Suggested-by: Jacek Anaszewski)

 .../devicetree/bindings/leds/leds-pwm.txt     | 50 -------------
 .../devicetree/bindings/leds/leds-pwm.yaml    | 70 +++++++++++++++++++
 2 files changed, 70 insertions(+), 50 deletions(-)
 delete mode 100644 Documentation/devicetree/bindings/leds/leds-pwm.txt
 create mode 100644 Documentation/devicetree/bindings/leds/leds-pwm.yaml

diff --git a/Documentation/devicetree/bindings/leds/leds-pwm.txt b/Documentation/devicetree/bindings/leds/leds-pwm.txt
deleted file mode 100644
index 6c6583c35f2f..000000000000
--- a/Documentation/devicetree/bindings/leds/leds-pwm.txt
+++ /dev/null
@@ -1,50 +0,0 @@
-LED connected to PWM
-
-Required properties:
-- compatible : should be "pwm-leds".
-
-Each LED is represented as a sub-node of the pwm-leds device.  Each
-node's name represents the name of the corresponding LED.
-
-LED sub-node properties:
-- pwms : PWM property to point to the PWM device (phandle)/port (id) and to
-  specify the period time to be used: <&phandle id period_ns>;
-- pwm-names : (optional) Name to be used by the PWM subsystem for the PWM device
-  For the pwms and pwm-names property please refer to:
-  Documentation/devicetree/bindings/pwm/pwm.txt
-- max-brightness : Maximum brightness possible for the LED
-- active-low : (optional) For PWMs where the LED is wired to supply
-  rather than ground.
-- label :  (optional)
-  see Documentation/devicetree/bindings/leds/common.txt
-- linux,default-trigger :  (optional)
-  see Documentation/devicetree/bindings/leds/common.txt
-
-Example:
-
-twl_pwm: pwm {
-	/* provides two PWMs (id 0, 1 for PWM1 and PWM2) */
-	compatible = "ti,twl6030-pwm";
-	#pwm-cells = <2>;
-};
-
-twl_pwmled: pwmled {
-	/* provides one PWM (id 0 for Charing indicator LED) */
-	compatible = "ti,twl6030-pwmled";
-	#pwm-cells = <2>;
-};
-
-pwmleds {
-	compatible = "pwm-leds";
-	kpad {
-		label = "omap4::keypad";
-		pwms = <&twl_pwm 0 7812500>;
-		max-brightness = <127>;
-	};
-
-	charging {
-		label = "omap4:green:chrg";
-		pwms = <&twl_pwmled 0 7812500>;
-		max-brightness = <255>;
-	};
-};
diff --git a/Documentation/devicetree/bindings/leds/leds-pwm.yaml b/Documentation/devicetree/bindings/leds/leds-pwm.yaml
new file mode 100644
index 000000000000..fe4d5fd25913
--- /dev/null
+++ b/Documentation/devicetree/bindings/leds/leds-pwm.yaml
@@ -0,0 +1,70 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/leds/leds-pwm.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: LEDs connected to PWM
+
+maintainers:
+  - Pavel Machek <pavel@ucw.cz>
+
+description:
+  Each LED is represented as a sub-node of the pwm-leds device.  Each
+  node's name represents the name of the corresponding LED.
+
+properties:
+  compatible:
+    const: pwm-leds
+
+patternProperties:
+  "^led(-[0-9a-f]+)?$":
+    type: object
+
+    $ref: common.yaml#
+
+    properties:
+      pwms:
+        maxItems: 1
+
+      pwm-names: true
+
+      max-brightness:
+        description:
+          Maximum brightness possible for the LED
+        $ref: /schemas/types.yaml#/definitions/uint32
+
+      active-low:
+        description:
+          For PWMs where the LED is wired to supply rather than ground.
+        type: boolean
+
+    required:
+      - pwms
+      - max-brightness
+
+additionalProperties: false
+
+examples:
+  - |
+
+    #include <dt-bindings/leds/common.h>
+
+    led-controller {
+        compatible = "pwm-leds";
+
+        led-1 {
+            label = "omap4::keypad";
+            pwms = <&twl_pwm 0 7812500>;
+            max-brightness = <127>;
+        };
+
+        led-2 {
+            color = <LED_COLOR_ID_GREEN>;
+            function = LED_FUNCTION_CHARGING;
+            pwms = <&twl_pwmled 0 7812500>;
+            max-brightness = <255>;
+        };
+    };
+
+...
-- 
2.20.1


WARNING: multiple messages have this Message-ID (diff)
From: Alexander Dahl <post@lespocky.de>
To: Pavel Machek <pavel@ucw.cz>, Dan Murphy <dmurphy@ti.com>,
	Rob Herring <robh+dt@kernel.org>
Cc: linux-arm-kernel@lists.infradead.org, devicetree@vger.kernel.org,
	linux-samsung-soc@vger.kernel.org, Rob Herring <robh@kernel.org>,
	Alexander Dahl <ada@thorsis.com>,
	linux-kernel@vger.kernel.org,
	Krzysztof Kozlowski <krzk@kernel.org>,
	linux-mips@vger.kernel.org,
	Peter Ujfalusi <peter.ujfalusi@ti.com>,
	Russell King <linux@armlinux.org.uk>,
	Alexander Dahl <post@lespocky.de>,
	Jacek Anaszewski <jacek.anaszewski@gmail.com>,
	linux-amlogic@lists.infradead.org, linux-omap@vger.kernel.org,
	linux-stm32@st-md-mailman.stormreply.com,
	linux-leds@vger.kernel.org
Subject: [PATCH v7 02/12] dt-bindings: leds: Convert pwm to yaml
Date: Mon,  5 Oct 2020 22:34:41 +0200	[thread overview]
Message-ID: <20201005203451.9985-3-post@lespocky.de> (raw)
In-Reply-To: <20201005203451.9985-1-post@lespocky.de>

The example was adapted in the following ways:

- make use of the now supported 'function' and 'color' properties
- remove pwm nodes, those are documented elsewhere
- align node names to new dt schema rules and dt recommendations

License was not explicitly set before.  The license set now is
recommended by DT project.

Suggested-by: Jacek Anaszewski <jacek.anaszewski@gmail.com>
Signed-off-by: Alexander Dahl <post@lespocky.de>
Reviewed-by: Krzysztof Kozlowski <krzk@kernel.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Cc: Peter Ujfalusi <peter.ujfalusi@ti.com>
Cc: Russell King <linux@armlinux.org.uk>
---

Notes:
    NOTE: Due to license set/change this needs Acked-by or Signed-off-by from:
      * Peter Ujfalusi
      * Russell King
    
    That was discussed already with Peter (original author), still waiting
    for Acked-by though …
    
    Changelog
    ---------
    v6 -> v7:
      * added Reviewed-by (Krzysztof Kozlowski)
      * reworded commit message (suggested by Krzysztof)
      * added Reviewed-by (Rob Herring)
    
    v5 -> v6:
      * removed pwm nodes from example (Rob)
      * renamed led-controller node in example (Rob)
    
    v4 -> v5:
      * updated based on feedback by Rob Herring
      * removed Acked-by
    
    v3 -> v4:
      * added Cc to original author of the binding
    
    v2 -> v3:
      * changed license identifier to recommended one
      * added Acked-by
    
    v2:
      * added this patch to series (Suggested-by: Jacek Anaszewski)

 .../devicetree/bindings/leds/leds-pwm.txt     | 50 -------------
 .../devicetree/bindings/leds/leds-pwm.yaml    | 70 +++++++++++++++++++
 2 files changed, 70 insertions(+), 50 deletions(-)
 delete mode 100644 Documentation/devicetree/bindings/leds/leds-pwm.txt
 create mode 100644 Documentation/devicetree/bindings/leds/leds-pwm.yaml

diff --git a/Documentation/devicetree/bindings/leds/leds-pwm.txt b/Documentation/devicetree/bindings/leds/leds-pwm.txt
deleted file mode 100644
index 6c6583c35f2f..000000000000
--- a/Documentation/devicetree/bindings/leds/leds-pwm.txt
+++ /dev/null
@@ -1,50 +0,0 @@
-LED connected to PWM
-
-Required properties:
-- compatible : should be "pwm-leds".
-
-Each LED is represented as a sub-node of the pwm-leds device.  Each
-node's name represents the name of the corresponding LED.
-
-LED sub-node properties:
-- pwms : PWM property to point to the PWM device (phandle)/port (id) and to
-  specify the period time to be used: <&phandle id period_ns>;
-- pwm-names : (optional) Name to be used by the PWM subsystem for the PWM device
-  For the pwms and pwm-names property please refer to:
-  Documentation/devicetree/bindings/pwm/pwm.txt
-- max-brightness : Maximum brightness possible for the LED
-- active-low : (optional) For PWMs where the LED is wired to supply
-  rather than ground.
-- label :  (optional)
-  see Documentation/devicetree/bindings/leds/common.txt
-- linux,default-trigger :  (optional)
-  see Documentation/devicetree/bindings/leds/common.txt
-
-Example:
-
-twl_pwm: pwm {
-	/* provides two PWMs (id 0, 1 for PWM1 and PWM2) */
-	compatible = "ti,twl6030-pwm";
-	#pwm-cells = <2>;
-};
-
-twl_pwmled: pwmled {
-	/* provides one PWM (id 0 for Charing indicator LED) */
-	compatible = "ti,twl6030-pwmled";
-	#pwm-cells = <2>;
-};
-
-pwmleds {
-	compatible = "pwm-leds";
-	kpad {
-		label = "omap4::keypad";
-		pwms = <&twl_pwm 0 7812500>;
-		max-brightness = <127>;
-	};
-
-	charging {
-		label = "omap4:green:chrg";
-		pwms = <&twl_pwmled 0 7812500>;
-		max-brightness = <255>;
-	};
-};
diff --git a/Documentation/devicetree/bindings/leds/leds-pwm.yaml b/Documentation/devicetree/bindings/leds/leds-pwm.yaml
new file mode 100644
index 000000000000..fe4d5fd25913
--- /dev/null
+++ b/Documentation/devicetree/bindings/leds/leds-pwm.yaml
@@ -0,0 +1,70 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/leds/leds-pwm.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: LEDs connected to PWM
+
+maintainers:
+  - Pavel Machek <pavel@ucw.cz>
+
+description:
+  Each LED is represented as a sub-node of the pwm-leds device.  Each
+  node's name represents the name of the corresponding LED.
+
+properties:
+  compatible:
+    const: pwm-leds
+
+patternProperties:
+  "^led(-[0-9a-f]+)?$":
+    type: object
+
+    $ref: common.yaml#
+
+    properties:
+      pwms:
+        maxItems: 1
+
+      pwm-names: true
+
+      max-brightness:
+        description:
+          Maximum brightness possible for the LED
+        $ref: /schemas/types.yaml#/definitions/uint32
+
+      active-low:
+        description:
+          For PWMs where the LED is wired to supply rather than ground.
+        type: boolean
+
+    required:
+      - pwms
+      - max-brightness
+
+additionalProperties: false
+
+examples:
+  - |
+
+    #include <dt-bindings/leds/common.h>
+
+    led-controller {
+        compatible = "pwm-leds";
+
+        led-1 {
+            label = "omap4::keypad";
+            pwms = <&twl_pwm 0 7812500>;
+            max-brightness = <127>;
+        };
+
+        led-2 {
+            color = <LED_COLOR_ID_GREEN>;
+            function = LED_FUNCTION_CHARGING;
+            pwms = <&twl_pwmled 0 7812500>;
+            max-brightness = <255>;
+        };
+    };
+
+...
-- 
2.20.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

WARNING: multiple messages have this Message-ID (diff)
From: Alexander Dahl <post@lespocky.de>
To: Pavel Machek <pavel@ucw.cz>, Dan Murphy <dmurphy@ti.com>,
	Rob Herring <robh+dt@kernel.org>
Cc: linux-arm-kernel@lists.infradead.org, devicetree@vger.kernel.org,
	linux-samsung-soc@vger.kernel.org, Rob Herring <robh@kernel.org>,
	Alexander Dahl <ada@thorsis.com>,
	linux-kernel@vger.kernel.org,
	Krzysztof Kozlowski <krzk@kernel.org>,
	linux-mips@vger.kernel.org,
	Peter Ujfalusi <peter.ujfalusi@ti.com>,
	Russell King <linux@armlinux.org.uk>,
	Alexander Dahl <post@lespocky.de>,
	Jacek Anaszewski <jacek.anaszewski@gmail.com>,
	linux-amlogic@lists.infradead.org, linux-omap@vger.kernel.org,
	linux-stm32@st-md-mailman.stormreply.com,
	linux-leds@vger.kernel.org
Subject: [PATCH v7 02/12] dt-bindings: leds: Convert pwm to yaml
Date: Mon,  5 Oct 2020 22:34:41 +0200	[thread overview]
Message-ID: <20201005203451.9985-3-post@lespocky.de> (raw)
In-Reply-To: <20201005203451.9985-1-post@lespocky.de>

The example was adapted in the following ways:

- make use of the now supported 'function' and 'color' properties
- remove pwm nodes, those are documented elsewhere
- align node names to new dt schema rules and dt recommendations

License was not explicitly set before.  The license set now is
recommended by DT project.

Suggested-by: Jacek Anaszewski <jacek.anaszewski@gmail.com>
Signed-off-by: Alexander Dahl <post@lespocky.de>
Reviewed-by: Krzysztof Kozlowski <krzk@kernel.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Cc: Peter Ujfalusi <peter.ujfalusi@ti.com>
Cc: Russell King <linux@armlinux.org.uk>
---

Notes:
    NOTE: Due to license set/change this needs Acked-by or Signed-off-by from:
      * Peter Ujfalusi
      * Russell King
    
    That was discussed already with Peter (original author), still waiting
    for Acked-by though …
    
    Changelog
    ---------
    v6 -> v7:
      * added Reviewed-by (Krzysztof Kozlowski)
      * reworded commit message (suggested by Krzysztof)
      * added Reviewed-by (Rob Herring)
    
    v5 -> v6:
      * removed pwm nodes from example (Rob)
      * renamed led-controller node in example (Rob)
    
    v4 -> v5:
      * updated based on feedback by Rob Herring
      * removed Acked-by
    
    v3 -> v4:
      * added Cc to original author of the binding
    
    v2 -> v3:
      * changed license identifier to recommended one
      * added Acked-by
    
    v2:
      * added this patch to series (Suggested-by: Jacek Anaszewski)

 .../devicetree/bindings/leds/leds-pwm.txt     | 50 -------------
 .../devicetree/bindings/leds/leds-pwm.yaml    | 70 +++++++++++++++++++
 2 files changed, 70 insertions(+), 50 deletions(-)
 delete mode 100644 Documentation/devicetree/bindings/leds/leds-pwm.txt
 create mode 100644 Documentation/devicetree/bindings/leds/leds-pwm.yaml

diff --git a/Documentation/devicetree/bindings/leds/leds-pwm.txt b/Documentation/devicetree/bindings/leds/leds-pwm.txt
deleted file mode 100644
index 6c6583c35f2f..000000000000
--- a/Documentation/devicetree/bindings/leds/leds-pwm.txt
+++ /dev/null
@@ -1,50 +0,0 @@
-LED connected to PWM
-
-Required properties:
-- compatible : should be "pwm-leds".
-
-Each LED is represented as a sub-node of the pwm-leds device.  Each
-node's name represents the name of the corresponding LED.
-
-LED sub-node properties:
-- pwms : PWM property to point to the PWM device (phandle)/port (id) and to
-  specify the period time to be used: <&phandle id period_ns>;
-- pwm-names : (optional) Name to be used by the PWM subsystem for the PWM device
-  For the pwms and pwm-names property please refer to:
-  Documentation/devicetree/bindings/pwm/pwm.txt
-- max-brightness : Maximum brightness possible for the LED
-- active-low : (optional) For PWMs where the LED is wired to supply
-  rather than ground.
-- label :  (optional)
-  see Documentation/devicetree/bindings/leds/common.txt
-- linux,default-trigger :  (optional)
-  see Documentation/devicetree/bindings/leds/common.txt
-
-Example:
-
-twl_pwm: pwm {
-	/* provides two PWMs (id 0, 1 for PWM1 and PWM2) */
-	compatible = "ti,twl6030-pwm";
-	#pwm-cells = <2>;
-};
-
-twl_pwmled: pwmled {
-	/* provides one PWM (id 0 for Charing indicator LED) */
-	compatible = "ti,twl6030-pwmled";
-	#pwm-cells = <2>;
-};
-
-pwmleds {
-	compatible = "pwm-leds";
-	kpad {
-		label = "omap4::keypad";
-		pwms = <&twl_pwm 0 7812500>;
-		max-brightness = <127>;
-	};
-
-	charging {
-		label = "omap4:green:chrg";
-		pwms = <&twl_pwmled 0 7812500>;
-		max-brightness = <255>;
-	};
-};
diff --git a/Documentation/devicetree/bindings/leds/leds-pwm.yaml b/Documentation/devicetree/bindings/leds/leds-pwm.yaml
new file mode 100644
index 000000000000..fe4d5fd25913
--- /dev/null
+++ b/Documentation/devicetree/bindings/leds/leds-pwm.yaml
@@ -0,0 +1,70 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/leds/leds-pwm.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: LEDs connected to PWM
+
+maintainers:
+  - Pavel Machek <pavel@ucw.cz>
+
+description:
+  Each LED is represented as a sub-node of the pwm-leds device.  Each
+  node's name represents the name of the corresponding LED.
+
+properties:
+  compatible:
+    const: pwm-leds
+
+patternProperties:
+  "^led(-[0-9a-f]+)?$":
+    type: object
+
+    $ref: common.yaml#
+
+    properties:
+      pwms:
+        maxItems: 1
+
+      pwm-names: true
+
+      max-brightness:
+        description:
+          Maximum brightness possible for the LED
+        $ref: /schemas/types.yaml#/definitions/uint32
+
+      active-low:
+        description:
+          For PWMs where the LED is wired to supply rather than ground.
+        type: boolean
+
+    required:
+      - pwms
+      - max-brightness
+
+additionalProperties: false
+
+examples:
+  - |
+
+    #include <dt-bindings/leds/common.h>
+
+    led-controller {
+        compatible = "pwm-leds";
+
+        led-1 {
+            label = "omap4::keypad";
+            pwms = <&twl_pwm 0 7812500>;
+            max-brightness = <127>;
+        };
+
+        led-2 {
+            color = <LED_COLOR_ID_GREEN>;
+            function = LED_FUNCTION_CHARGING;
+            pwms = <&twl_pwmled 0 7812500>;
+            max-brightness = <255>;
+        };
+    };
+
+...
-- 
2.20.1


_______________________________________________
linux-amlogic mailing list
linux-amlogic@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-amlogic

  parent reply	other threads:[~2020-10-05 20:36 UTC|newest]

Thread overview: 122+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-10-05 20:34 [PATCH v7 00/12] leds: pwm: Make automatic labels work Alexander Dahl
2020-10-05 20:34 ` Alexander Dahl
2020-10-05 20:34 ` Alexander Dahl
2020-10-05 20:34 ` [PATCH v7 01/12] leds: pwm: Remove platform_data support Alexander Dahl
2020-10-05 20:34   ` Alexander Dahl
2020-10-05 20:34   ` Alexander Dahl
2020-10-07 10:03   ` Pavel Machek
2020-10-07 10:03     ` Pavel Machek
2020-10-07 10:03     ` Pavel Machek
2020-10-05 20:34 ` Alexander Dahl [this message]
2020-10-05 20:34   ` [PATCH v7 02/12] dt-bindings: leds: Convert pwm to yaml Alexander Dahl
2020-10-05 20:34   ` Alexander Dahl
2020-10-07 10:02   ` Pavel Machek
2020-10-07 10:02     ` Pavel Machek
2020-10-07 10:02     ` Pavel Machek
2020-10-07 10:03     ` Krzysztof Kozlowski
2020-10-07 10:03       ` Krzysztof Kozlowski
2020-10-07 10:03       ` Krzysztof Kozlowski
2020-10-28 20:39   ` Alexander Dahl
2020-10-28 20:39     ` Alexander Dahl
2020-10-28 20:39     ` Alexander Dahl
2020-10-29 13:46     ` Russell King - ARM Linux admin
2020-10-29 13:46       ` Russell King - ARM Linux admin
2020-10-29 13:46       ` Russell King - ARM Linux admin
2020-11-25 11:08   ` Pavel Machek
2020-11-25 11:08     ` Pavel Machek
2020-11-25 11:08     ` Pavel Machek
2020-10-05 20:34 ` [PATCH v7 03/12] dt-bindings: mfd: Fix schema warnings for pwm-leds Alexander Dahl
2020-10-05 20:34   ` Alexander Dahl
2020-10-05 20:34   ` Alexander Dahl
2020-10-06  2:17   ` Jeff LaBundy
2020-10-06  2:17     ` Jeff LaBundy
2020-10-06  2:17     ` Jeff LaBundy
2020-10-06  6:34     ` Alexander Dahl
2020-10-06  6:34       ` Alexander Dahl
2020-10-06  6:34       ` Alexander Dahl
2020-10-06 22:27       ` Rob Herring
2020-10-06 22:27         ` Rob Herring
2020-10-06 22:27         ` Rob Herring
2020-10-06 22:28   ` Rob Herring
2020-10-06 22:28     ` Rob Herring
2020-10-06 22:28     ` Rob Herring
2020-10-07 10:03   ` Pavel Machek
2020-10-07 10:03     ` Pavel Machek
2020-10-07 10:03     ` Pavel Machek
2020-10-07 10:08     ` Alexander Dahl
2020-10-07 10:08       ` Alexander Dahl
2020-10-07 10:08       ` Alexander Dahl
2020-10-08  7:33     ` Lee Jones
2020-10-08  7:33       ` Lee Jones
2020-10-08  7:33       ` Lee Jones
2020-10-08  7:50       ` Pavel Machek
2020-10-08  7:50         ` Pavel Machek
2020-10-08  7:50         ` Pavel Machek
2020-10-05 20:34 ` [PATCH v7 04/12] ARM: dts: at91: smartkiz: Reference led node directly Alexander Dahl
2020-10-05 20:34   ` Alexander Dahl
2020-10-05 20:34   ` Alexander Dahl
2020-10-05 20:34 ` [PATCH v7 05/12] ARM: dts: at91: Fix schema warnings for pwm-leds Alexander Dahl
2020-10-05 20:34   ` Alexander Dahl
2020-10-05 20:34   ` Alexander Dahl
2020-10-05 20:34 ` [PATCH v7 06/12] ARM: dts: berlin: " Alexander Dahl
2020-10-05 20:34   ` Alexander Dahl
2020-10-05 20:34   ` Alexander Dahl
2020-10-05 20:34 ` [PATCH v7 07/12] ARM: dts: exynos: " Alexander Dahl
2020-10-05 20:34   ` Alexander Dahl
2020-10-05 20:34   ` Alexander Dahl
2020-10-07  6:25   ` Krzysztof Kozlowski
2020-10-07  6:25     ` Krzysztof Kozlowski
2020-10-07  6:25     ` Krzysztof Kozlowski
2020-10-26 18:45   ` Krzysztof Kozlowski
2020-10-26 18:45     ` Krzysztof Kozlowski
2020-10-26 18:45     ` Krzysztof Kozlowski
2020-10-05 20:34 ` [PATCH v7 08/12] ARM: dts: imx: " Alexander Dahl
2020-10-05 20:34   ` Alexander Dahl
2020-10-05 20:34   ` Alexander Dahl
2020-10-30  7:46   ` Shawn Guo
2020-10-30  7:46     ` Shawn Guo
2020-10-30  7:46     ` Shawn Guo
2020-10-05 20:34 ` [PATCH v7 09/12] ARM: dts: omap: " Alexander Dahl
2020-10-05 20:34   ` Alexander Dahl
2020-10-05 20:34   ` Alexander Dahl
2020-11-10 13:25   ` Tony Lindgren
2020-11-10 13:25     ` Tony Lindgren
2020-11-10 13:25     ` Tony Lindgren
2020-10-05 20:34 ` [PATCH v7 10/12] ARM: dts: stm32: " Alexander Dahl
2020-10-05 20:34   ` Alexander Dahl
2020-10-05 20:34   ` Alexander Dahl
2020-10-27  7:03   ` [Linux-stm32] " Ahmad Fatoum
2020-10-27  7:03     ` Ahmad Fatoum
2020-10-27  7:03     ` Ahmad Fatoum
2020-10-27 10:05     ` Alexander Dahl
2020-10-27 10:05       ` Alexander Dahl
2020-10-27 10:05       ` Alexander Dahl
2020-10-27 10:58       ` Ahmad Fatoum
2020-10-27 10:58         ` Ahmad Fatoum
2020-10-27 10:58         ` Ahmad Fatoum
2020-10-28  7:34         ` Alexander Dahl
2020-10-28  7:34           ` Alexander Dahl
2020-10-28  7:34           ` Alexander Dahl
2020-11-02 10:47           ` Ahmad Fatoum
2020-11-02 10:47             ` Ahmad Fatoum
2020-11-02 10:47             ` Ahmad Fatoum
2020-10-31 13:54         ` Alexander Dahl
2020-10-31 13:54           ` Alexander Dahl
2020-11-02 11:10           ` Ahmad Fatoum
2020-11-02 11:10             ` Ahmad Fatoum
2020-11-09 11:02           ` Alexandre Torgue
2020-11-09 11:02             ` Alexandre Torgue
2020-11-09 22:21             ` Alexander Dahl
2020-11-09 22:21               ` Alexander Dahl
2020-10-05 20:34 ` [PATCH v7 11/12] arm64: dts: meson: " Alexander Dahl
2020-10-05 20:34   ` Alexander Dahl
2020-10-05 20:34   ` Alexander Dahl
2020-10-05 20:34 ` [PATCH v7 12/12] MIPS: DTS: img: " Alexander Dahl
2020-10-05 20:34   ` Alexander Dahl
2020-10-05 20:34   ` Alexander Dahl
2020-10-28 18:56 ` [PATCH v7 00/12] leds: pwm: Make automatic labels work Alexandre Belloni
2020-10-28 18:56   ` Alexandre Belloni
2020-10-28 18:56   ` Alexandre Belloni
2020-10-28 19:21   ` Alexandre Belloni
2020-10-28 19:21     ` Alexandre Belloni
2020-10-28 19:21     ` Alexandre Belloni

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20201005203451.9985-3-post@lespocky.de \
    --to=post@lespocky.de \
    --cc=ada@thorsis.com \
    --cc=devicetree@vger.kernel.org \
    --cc=dmurphy@ti.com \
    --cc=jacek.anaszewski@gmail.com \
    --cc=krzk@kernel.org \
    --cc=linux-amlogic@lists.infradead.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-leds@vger.kernel.org \
    --cc=linux-mips@vger.kernel.org \
    --cc=linux-omap@vger.kernel.org \
    --cc=linux-samsung-soc@vger.kernel.org \
    --cc=linux-stm32@st-md-mailman.stormreply.com \
    --cc=linux@armlinux.org.uk \
    --cc=pavel@ucw.cz \
    --cc=peter.ujfalusi@ti.com \
    --cc=robh+dt@kernel.org \
    --cc=robh@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.