[PATCH v2] net: lx2160a.c: Update to set ECx_PMUX precedence

[Razvan Ionut Cirjan <razvanionut.cirjan@nxp.com>]

As per hardware documentation, ECx_PMUX has precedence
over SerDes protocol.
For LX2160/LX2162 if DPMACs 17 and 18 are enabled as SGMII
through SerDes protocol but ECx_PMUX configured them as RGMII,
then the ports will be configured as RGMII and not SGMII.

Signed-off-by: Razvan Ionut Cirjan <razvanionut.cirjan@nxp.com>
---
 arch/arm/cpu/armv8/fsl-layerscape/cpu.c       | 20 +++++++++----------
 .../asm/arch-fsl-layerscape/immap_lsch3.h     |  2 +-
 drivers/net/ldpaa_eth/lx2160a.c               |  4 ++--
 3 files changed, 13 insertions(+), 13 deletions(-)

diff --git a/arch/arm/cpu/armv8/fsl-layerscape/cpu.c b/arch/arm/cpu/armv8/fsl-layerscape/cpu.c
index 33d72f194558..33920bad26f0 100644
--- a/arch/arm/cpu/armv8/fsl-layerscape/cpu.c
+++ b/arch/arm/cpu/armv8/fsl-layerscape/cpu.c
@@ -1144,17 +1144,17 @@ int arch_early_init_r(void)
 	/* some dpmacs in armv8a based freescale layerscape SOCs can be
 	 * configured via both serdes(sgmii, xfi, xlaui etc) bits and via
 	 * EC*_PMUX(rgmii) bits in RCW.
-	 * e.g. dpmac 17 and 18 in LX2160A and LX2162A can be configured as
-	 * SGMII from serdes bits and as RGMII via EC1_PMUX/EC2_PMUX bits
-	 * Now if a dpmac is enabled by serdes bits then it takes precedence
-	 * over EC*_PMUX bits. i.e. in LX2160A if we select serdes protocol
-	 * that configures dpmac17 as SGMII and set the EC1_PMUX as RGMII,
-	 * then the dpmac is SGMII and not RGMII.
+	 * e.g. dpmac 17 and 18 in LX2160A can be configured as SGMII from
+	 * serdes bits and as RGMII via EC1_PMUX/EC2_PMUX bits
+	 * Now if a dpmac is enabled as RGMII through ECx_PMUX then it takes
+	 * precedence over SerDes protocol. i.e. in LX2160A if we select serdes
+	 * protocol that configures dpmac17 as SGMII and set the EC1_PMUX as
+	 * RGMII, then the dpmac is RGMII and not SGMII.
 	 *
-	 * Therefore, move the fsl_rgmii_init after fsl_serdes_init. in
-	 * fsl_rgmii_init function of SOC, we will check if the dpmac is enabled
-	 * or not? if it is (fsl_serdes_init has already enabled the dpmac),
-	 * then don't enable it.
+	 * Therefore, even thought fsl_rgmii_init is after fsl_serdes_init
+	 * function of SOC, the dpmac will be enabled as RGMII even if it was
+	 * also enabled before as SGMII. If ECx_PMUX is not configured for
+	 * RGMII, DPMAC will remain configured as SGMII from fsl_serdes_init().
 	 */
 	fsl_rgmii_init();
 #endif
diff --git a/arch/arm/include/asm/arch-fsl-layerscape/immap_lsch3.h b/arch/arm/include/asm/arch-fsl-layerscape/immap_lsch3.h
index 2971262736f4..d579af9558b6 100644
--- a/arch/arm/include/asm/arch-fsl-layerscape/immap_lsch3.h
+++ b/arch/arm/include/asm/arch-fsl-layerscape/immap_lsch3.h
@@ -396,7 +396,7 @@ struct ccsr_gur {
 #define FSL_CHASSIS3_EC2_REGSR  27
 #define FSL_CHASSIS3_EC1_REGSR_PRTCL_MASK	0x00000003
 #define FSL_CHASSIS3_EC1_REGSR_PRTCL_SHIFT	0
-#define FSL_CHASSIS3_EC2_REGSR_PRTCL_MASK	0x00000007
+#define FSL_CHASSIS3_EC2_REGSR_PRTCL_MASK	0x0000000C
 #define FSL_CHASSIS3_EC2_REGSR_PRTCL_SHIFT	2
 #define FSL_CHASSIS3_RCWSR28_SRDS1_PRTCL_MASK   0x001F0000
 #define FSL_CHASSIS3_RCWSR28_SRDS1_PRTCL_SHIFT  16
diff --git a/drivers/net/ldpaa_eth/lx2160a.c b/drivers/net/ldpaa_eth/lx2160a.c
index 41eff0dd1cff..90ac5db1fec0 100644
--- a/drivers/net/ldpaa_eth/lx2160a.c
+++ b/drivers/net/ldpaa_eth/lx2160a.c
@@ -93,7 +93,7 @@ void fsl_rgmii_init(void)
 		& FSL_CHASSIS3_EC1_REGSR_PRTCL_MASK;
 	ec >>= FSL_CHASSIS3_EC1_REGSR_PRTCL_SHIFT;
 
-	if (!ec && (wriop_is_enabled_dpmac(17) == -ENODEV))
+	if (!ec)
 		wriop_init_dpmac_enet_if(17, PHY_INTERFACE_MODE_RGMII_ID);
 #endif
 
@@ -102,7 +102,7 @@ void fsl_rgmii_init(void)
 		& FSL_CHASSIS3_EC2_REGSR_PRTCL_MASK;
 	ec >>= FSL_CHASSIS3_EC2_REGSR_PRTCL_SHIFT;
 
-	if (!ec && (wriop_is_enabled_dpmac(18) == -ENODEV))
+	if (!ec)
 		wriop_init_dpmac_enet_if(18, PHY_INTERFACE_MODE_RGMII_ID);
 #endif
 }
-- 
2.17.1