All of lore.kernel.org
 help / color / mirror / Atom feed
From: Patrick Delaunay <patrick.delaunay@st.com>
To: u-boot@lists.denx.de
Subject: [PATCH 23/33] phy: stm32-usbphyc: migrate trace to dev and log macro
Date: Wed, 14 Oct 2020 11:16:36 +0200	[thread overview]
Message-ID: <20201014091646.4233-24-patrick.delaunay@st.com> (raw)
In-Reply-To: <20201014091646.4233-1-patrick.delaunay@st.com>

Change pr_debug to log_debug or dev_dbg macro and define LOG_CATEGORY.

Remove the "%s:" __func__  header as it is managed by dev macro
(dev->name is displayed) or log macro (CONFIG_LOGF_FUNC).

Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
---

 drivers/phy/phy-stm32-usbphyc.c | 18 ++++++++++--------
 1 file changed, 10 insertions(+), 8 deletions(-)

diff --git a/drivers/phy/phy-stm32-usbphyc.c b/drivers/phy/phy-stm32-usbphyc.c
index 9d4296d649..2b69514b3a 100644
--- a/drivers/phy/phy-stm32-usbphyc.c
+++ b/drivers/phy/phy-stm32-usbphyc.c
@@ -3,6 +3,8 @@
  * Copyright (C) 2018, STMicroelectronics - All Rights Reserved
  */
 
+#define LOG_CATEGORY UCLASS_PHY
+
 #include <common.h>
 #include <clk.h>
 #include <div64.h>
@@ -97,8 +99,8 @@ static int stm32_usbphyc_pll_init(struct stm32_usbphyc *usbphyc)
 	u32 usbphyc_pll;
 
 	if ((clk_rate < PLL_INFF_MIN_RATE) || (clk_rate > PLL_INFF_MAX_RATE)) {
-		pr_debug("%s: input clk freq (%dHz) out of range\n",
-			 __func__, clk_rate);
+		log_debug("input clk freq (%dHz) out of range\n",
+			  clk_rate);
 		return -EINVAL;
 	}
 
@@ -115,8 +117,8 @@ static int stm32_usbphyc_pll_init(struct stm32_usbphyc *usbphyc)
 
 	writel(usbphyc_pll, usbphyc->base + STM32_USBPHYC_PLL);
 
-	pr_debug("%s: input clk freq=%dHz, ndiv=%d, frac=%d\n", __func__,
-		 clk_rate, pll_params.ndiv, pll_params.frac);
+	log_debug("input clk freq=%dHz, ndiv=%d, frac=%d\n",
+		  clk_rate, pll_params.ndiv, pll_params.frac);
 
 	return 0;
 }
@@ -153,7 +155,7 @@ static int stm32_usbphyc_phy_init(struct phy *phy)
 		     true : false;
 	int ret;
 
-	pr_debug("%s phy ID = %lu\n", __func__, phy->id);
+	dev_dbg(phy->dev, "phy ID = %lu\n", phy->id);
 	/* Check if one phy port has already configured the pll */
 	if (pllen && stm32_usbphyc_is_init(usbphyc))
 		goto initialized;
@@ -199,7 +201,7 @@ static int stm32_usbphyc_phy_exit(struct phy *phy)
 	struct stm32_usbphyc_phy *usbphyc_phy = usbphyc->phys + phy->id;
 	int ret;
 
-	pr_debug("%s phy ID = %lu\n", __func__, phy->id);
+	dev_dbg(phy->dev, "phy ID = %lu\n", phy->id);
 	usbphyc_phy->init = false;
 
 	/* Check if other phy port requires pllen */
@@ -238,7 +240,7 @@ static int stm32_usbphyc_phy_power_on(struct phy *phy)
 	struct stm32_usbphyc_phy *usbphyc_phy = usbphyc->phys + phy->id;
 	int ret;
 
-	pr_debug("%s phy ID = %lu\n", __func__, phy->id);
+	dev_dbg(phy->dev, "phy ID = %lu\n", phy->id);
 	if (usbphyc_phy->vdd) {
 		ret = regulator_set_enable(usbphyc_phy->vdd, true);
 		if (ret)
@@ -256,7 +258,7 @@ static int stm32_usbphyc_phy_power_off(struct phy *phy)
 	struct stm32_usbphyc_phy *usbphyc_phy = usbphyc->phys + phy->id;
 	int ret;
 
-	pr_debug("%s phy ID = %lu\n", __func__, phy->id);
+	dev_dbg(phy->dev, "phy ID = %lu\n", phy->id);
 	usbphyc_phy->powered = false;
 
 	if (stm32_usbphyc_is_powered(usbphyc))
-- 
2.17.1

  parent reply	other threads:[~2020-10-14  9:16 UTC|newest]

Thread overview: 76+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-10-14  9:16 [PATCH 00/33] stm32: enable logging features Patrick Delaunay
2020-10-14  9:16 ` [PATCH 01/33] arm: stm32mp: migrate trace to log macro Patrick Delaunay
2020-10-21 12:01   ` Patrice CHOTARD
2020-10-14  9:16 ` [PATCH 02/33] arm: stm32mp: migrate cmd_stm32prog " Patrick Delaunay
2020-10-21 12:01   ` Patrice CHOTARD
2020-10-14  9:16 ` [PATCH 03/33] arm: stm32mp: bsec: migrate trace " Patrick Delaunay
2020-10-21 12:01   ` Patrice CHOTARD
2020-10-14  9:16 ` [PATCH 04/33] pinctrl: stm32: " Patrick Delaunay
2020-10-21 12:38   ` Patrice CHOTARD
2020-10-14  9:16 ` [PATCH 05/33] gpio: stm32-gpio: migrate trace to dev and " Patrick Delaunay
2020-10-21 12:24   ` Patrice CHOTARD
2020-10-21 12:29   ` Patrice CHOTARD
2020-10-14  9:16 ` [PATCH 06/33] remoproc: stm32: migrate trace to " Patrick Delaunay
2020-10-21 12:25   ` Patrice CHOTARD
2020-10-14  9:16 ` [PATCH 07/33] ram: " Patrick Delaunay
2020-10-21 12:25   ` [Uboot-stm32] " Patrice CHOTARD
2020-10-14  9:16 ` [PATCH 08/33] ram: stm32mp1: migrate trace to dev or " Patrick Delaunay
2020-10-21 12:25   ` Patrice CHOTARD
2020-10-14  9:16 ` [PATCH 09/33] mmc: stm32_sdmmc2: migrate trace to dev and " Patrick Delaunay
2020-10-15 10:25   ` Peng Fan
2020-10-21 12:26   ` Patrice CHOTARD
2020-10-14  9:16 ` [PATCH 10/33] timer: stm32: migrate trace to " Patrick Delaunay
2020-10-21 12:26   ` [Uboot-stm32] " Patrice CHOTARD
2020-10-14  9:16 ` [PATCH 11/33] hwspinlock: " Patrick Delaunay
2020-10-21 12:26   ` Patrice CHOTARD
2020-10-14  9:16 ` [PATCH 12/33] rtc: " Patrick Delaunay
2020-10-21 12:26   ` Patrice CHOTARD
2020-10-14  9:16 ` [PATCH 13/33] watchdog: stm32mp: migrate trace to dev macro Patrick Delaunay
2020-10-21 12:27   ` Patrice CHOTARD
2020-10-14  9:16 ` [PATCH 14/33] power: regulator: stm32-verfbuf: define LOG_CATEGORY Patrick Delaunay
2020-10-21 12:27   ` Patrice CHOTARD
2020-10-14  9:16 ` [PATCH 15/33] misc: rcc: migrate trace to dev macro Patrick Delaunay
2020-10-21 12:27   ` Patrice CHOTARD
2020-10-14  9:16 ` [PATCH 16/33] misc: rcc: keep the rcc device name for subnode Patrick Delaunay
2020-10-21 12:28   ` Patrice CHOTARD
2020-10-14  9:16 ` [PATCH 17/33] clk: stm32mp1: migrate trace to dev and log macro Patrick Delaunay
2020-10-21 12:28   ` Patrice CHOTARD
2020-10-14  9:16 ` [PATCH 18/33] clk: clk_stm32f: " Patrick Delaunay
2020-10-21 12:32   ` [Uboot-stm32] " Patrice CHOTARD
2020-10-14  9:16 ` [PATCH 19/33] clk: clk_stm32h7: " Patrick Delaunay
2020-10-21 12:32   ` [Uboot-stm32] " Patrice CHOTARD
2020-10-14  9:16 ` [PATCH 20/33] reset: stm32-reset: " Patrick Delaunay
2020-10-21 12:32   ` Patrice CHOTARD
2020-10-14  9:16 ` [PATCH 21/33] mailbox: stm32-ipcc: " Patrick Delaunay
2020-10-21 12:33   ` Patrice CHOTARD
2020-10-14  9:16 ` [PATCH 22/33] i2c: stm32f7_i2c: " Patrick Delaunay
2020-10-21 12:33   ` Patrice CHOTARD
2020-10-14  9:16 ` Patrick Delaunay [this message]
2020-10-21 12:33   ` [PATCH 23/33] phy: stm32-usbphyc: " Patrice CHOTARD
2020-10-14  9:16 ` [PATCH 24/33] spi: stm32_spi: " Patrick Delaunay
2020-10-21 12:34   ` Patrice CHOTARD
2020-10-14  9:16 ` [PATCH 25/33] spi: stm32_qspi: " Patrick Delaunay
2020-10-21 12:34   ` Patrice CHOTARD
2020-10-14  9:16 ` [PATCH 26/33] mtd: stm32_fmc2: " Patrick Delaunay
2020-10-21 12:34   ` Patrice CHOTARD
2020-10-14  9:16 ` [PATCH 27/33] memory: stm32-fmc2: " Patrick Delaunay
2020-10-21 12:34   ` Patrice CHOTARD
2020-10-14  9:16 ` [PATCH 28/33] serial: stm32: define LOG_CATEGORY Patrick Delaunay
2020-10-21 12:34   ` Patrice CHOTARD
2020-10-14  9:16 ` [PATCH 29/33] video: stm32_ltdc: migrate trace to dev and log macro Patrick Delaunay
2020-10-21 12:35   ` Patrice CHOTARD
2020-10-14  9:16 ` [PATCH 30/33] video: stm32_dsi: " Patrick Delaunay
2020-10-15  8:50   ` Philippe CORNU
2020-10-14  9:16 ` [PATCH 31/33] board: st: stm32mp1: " Patrick Delaunay
2020-10-21 12:35   ` [Uboot-stm32] " Patrice CHOTARD
2020-10-14  9:16 ` [PATCH 32/33] board: st: common: " Patrick Delaunay
2020-10-21 12:36   ` [Uboot-stm32] " Patrice CHOTARD
2020-10-14  9:16 ` [PATCH 33/33] configs: stm32mp15: enable LOG features Patrick Delaunay
2020-10-21 12:37   ` [Uboot-stm32] " Patrice CHOTARD
2020-10-15 15:05 ` [PATCH 00/33] stm32: enable logging features Simon Glass
2020-10-15 15:59   ` Patrick DELAUNAY
2020-10-26 19:22     ` Simon Glass
2020-10-28 11:52       ` Patrick DELAUNAY
2020-10-30 18:15         ` Simon Glass
2020-11-06 17:45           ` Patrick DELAUNAY
2020-11-06 18:50             ` Simon Glass

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20201014091646.4233-24-patrick.delaunay@st.com \
    --to=patrick.delaunay@st.com \
    --cc=u-boot@lists.denx.de \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.